Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 59

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2008_041
id	ecaade2008_041
authors	Çolakoglu, Birgül; Yazar, Tugrul; Uysal, Serkan
year	2008
title	Educational Experiment on Generative Tool Development in Architecture
doi	https://doi.org/10.52842/conf.ecaade.2008.685
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 685-692
summary	This paper describes an introductory computational design course for graduate students of design in which Islamic star patterns are utilized in teaching computational logic and design rules. Formal descriptions of eight pointed Islamic star pattern that depict a variety of geometrical structures and constraints of the Euclidean shapes are extracted with the shape grammar method. Then star pattern generator that runs on a specific CAD system is developed by encoding these formal descriptions in systems scripting language. The examples of new designs are generated, and then fabricated using various CAM technologies.
keywords	Computational design, generative algorithms, Islamic star patterns, architectural education
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:57

_id	cdc2008_243
id	cdc2008_243
authors	Loukissas, Yanni
year	2008
title	Keepers of the Geometry: Architects in a Culture of Simulation
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 243-244
summary	“Why do we have to change? We’ve been building buildings for years without CATIA?” Roger Norfleet, a practicing architect in his thirties poses this question to Tim Quix, a generation older and an expert in CATIA, a computer-aided design tool developed by Dassault Systemes in the early 1980’s for use by aerospace engineers. It is 2005 and CATIA has just come into use at Paul Morris Associates, the thirty-person architecture firm where Norfleet works; he is struggling with what it will mean for him, for his firm, for his profession. Computer-aided design is about creativity, but also about jurisdiction, about who controls the design process. In Architecture: The Story of Practice, Architectural theorist Dana Cuff writes that each generation of architects is educated to understand what constitutes a creative act and who in the system of their profession is empowered to use it and at what time. Creativity is socially constructed and Norfleet is coming of age as an architect in a time of technological but also social transition. He must come to terms with the increasingly complex computeraided design tools that have changed both creativity and the rules by which it can operate. In today’s practices, architects use computer-aided design software to produce threedimensional geometric models. Sometimes they use off-the-shelf commercial software like CATIA, sometimes they customize this software through plug-ins and macros, sometimes they work with software that they have themselves programmed. And yet, conforming to Larson’s ideas that they claim the higher ground by identifying with art and not with science, contemporary architects do not often use the term “simulation.” Rather, they have held onto traditional terms such as “modeling” to describe the buzz of new activity with digital technology. But whether or not they use the term, simulation is creating new architectural identities and transforming relationships among a range of design collaborators: masters and apprentices, students and teachers, technical experts and virtuoso programmers. These days, constructing an identity as an architect requires that one define oneself in relation to simulation. Case studies, primarily from two architectural firms, illustrate the transformation of traditional relationships, in particular that of master and apprentice, and the emergence of new roles, including a new professional identity, “keeper of the geometry,” defined by the fusion of person and machine. Like any profession, architecture may be seen as a system in flux. However, with their new roles and relationships, architects are learning that the fight for professional jurisdiction is increasingly for jurisdiction over simulation. Computer-aided design is changing professional patterns of production in architecture, the very way in which professionals compete with each other by making new claims to knowledge. Even today, employees at Paul Morris squabble about the role that simulation software should play in the office. Among other things, they fight about the role it should play in promotion and firm hierarchy. They bicker about the selection of new simulation software, knowing that choosing software implies greater power for those who are expert in it. Architects and their collaborators are in a continual struggle to define the creative roles that can bring them professional acceptance and greater control over design. New technologies for computer-aided design do not change this reality, they become players in it.
email
last changed	2009/01/07 08:05

_id	sigradi2008_180
id	sigradi2008_180
authors	Vincent, Charles
year	2008
title	Gulliver in the land of Generative Design
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	The current trend in architectural design towards architectural computing has been treated both from a philosophical standing point and as an operational systems’ problem, in a quest for explications which could at last break ground for a more broad development and adoption of design tools. As Kostas Terzidis (2007) puts it, the intuitiveness that architects have put on so high a pedestal seems to be the central issue to be dealt with by both views. There seems to be no apparent shortcut toward the reconciliation between traditional practice and new media and most certainly it is not only a problem of interface design, but one of design method clarification and reinterpretation of those methods into computing systems. Furthermore, there’s no doubt left as to whether computing systems can generate such new patterns as to impact our own understanding of architecture. But even if computer algorithms can make possible the exploration of abstract alternatives to an abstract initial idea, as in Mathematica and Processing, the issue of relating abstract and geometric representations of human centered architecture lays in the hands of architects, programmers or, better yet, architect-programmers. What seems now to be the relevant change is that architectural design might escape from the traditional sequence embedded in the need – program – design iterations – solution timeline, substituted by a web of interactions among differing experimental paths, in which even the identification of needs is to be informed by computing. It is interesting to note that the computational approach to architectural design has been praised for the formal fluidity of bubbles and Bezier shapes it entails and for the overcoming of functionalist and serialization typical of modern architecture. That approach betrays a high degree of canonic fascination with the tools of the trade and very little connection to the day to day chores of building design. On the other hand, shall our new tools and toys open up new ways of thinking and designing our built landscape? What educational issues surface if we are to foster wider use of the existing technologies and simultaneously address the need to overtake mass construction? Is mass customization the answer for the dead end modern architecture has led us to? Can we let go the humanist approach begun in Renascence and culminated in Modernism or shall we review that approach in view of algorithmic architecture? Let us step back in time to 1726 when Swift’s ‘Travels into Several Remote Nations of the World by Lemuel Gulliver’ was first published. In Swift’s fierce critic of what seemed to him the most outrageous ideas, he conceived a strange machine devised to automatically write books and poetry, in much the same generative fashion that now, three centuries later, we begin to cherish. “Every one knew how laborious the usual method is of attaining to arts and sciences; whereas by his contrivance, the most ignorant person at a reasonable charge, and with a little bodily labour, may write books in philosophy, poetry, politicks, law, mathematics and theology, without the least assistance from genius or study. He then led me to the frame, about the sides whereof all his pupils stood in ranks. It was twenty foot square, placed in the middle of the room. The superficies was composed of several bits of wood, about the bigness of a dye, but some larger than others. They were all linked together by slender wires. These bits of wood were covered on every square with paper pasted on them; and, on these papers were written all the words of their language in their several moods, tenses, and declensions, but without any order. The professor then desired me to observe, for he was going to set his engine at work. The pupils at his command took each of them hold of an iron handle, whereof there were forty fixed round the edges of the frame; and giving them a sudden turn, the whole disposition of words was entirely changed. He then commanded six and thirty of the lads to read the several lines softly as they appeared upon the frame; and where they found three or four words together that might make part of a sentence, they dictated to the four remaining boys who were scribes. This work was repeated three or four times, and at every turn the engine was so contrived, that the words shifted into new places, as the square bits of wood moved upside down.” (Jonathan Swift, Gulliver’s Travels, A Voyage to Balnibarbi) What astonishing forecast did Swift show in that narrative that, in spite of the underlying incredulity and irony, still clarifies our surprise when faced to what might seem to some of us just an abandonment of all that architects and designers have cherished: creativeness and inventiveness. Yet, we could argue that such a radical shift in paradigm occurred once when master builders left the construction ground and took seat at drafting boards. The whole body of design and construction knowledge was split into what now seem to us just specialties undertaken by more and more isolated professionals. That shift entailed new forms of representation and prediction which now each and all architects take for granted. Also, Cartesian space representation turned out to be the main instrument for professional practice, even if one can argue that it is not more than the unfolding of stone carving techniques that master builders and guilds were so fond of. Enter computing and all its unfolding, i.e. DNA coding, fractal geometry, generative computing, nonlinear dynamics, pattern generation and cellular automata, as a whole new chapter in science, and compare that to conical perspective, descriptive and analytical geometry and calculus, and an image begins to form, delineating a separation between architect and digital designer. In previous works, we have tried approaching the issues regarding architects education in a more consensual way. But it seems now that the whole curricular corpus might be changed as well. The very foundations upon which we prepare future professionals shall change, not only in College, but in High School as well. In this paper, we delve further into the disconnect between current curricula and digital design practices and suggest new disciplinary grounds for a new architectural education.
keywords	Educational paradigm; Design teaching; Design methods;
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	ddss2008-08
id	ddss2008-08
authors	Koshak, Nabeel A.; Abdullah Fouda
year	2008
title	Analyzing Pedestrian Movement in Mataf Using GPSand GIS to Support Space Redesign
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Evaluating the use of architectural and urban spaces is an important issue for architects and urban designers who wish to enhance space usability. Space usability is crucial in crowded spaces such as Mataf areas. Millions of people come to the city of Makkah, Saudi Arabia every year to perform Hajj (Islamic Pilgrimage) and Umrah. A cornerstone of Hajj and Umrah spirituals is to perform Tawaf, which is the circumambulation of the Ka'bah in the center of the Holy Mosque in Makkah. The areas of performing Tawaf (called Mataf) become very crowded during Hajj and the last ten days of Ramadan. This paper demonstrates how we utilized Global Positioning Systems (GPS) and Geographic Information Systems (GIS) to analyze pedestrian movement while performing Tawaf. During the Hajj of 1424 H (2004 in the Georgian Calendar), several GPS devices were used to collect pedestrian movement coordinates at specific time intervals. Computer software for tracking analysis is used to visualize and analyze the pattern of pedestrian movement in Tawaf. The software allows users to view temporal data, which can be set up with past time windows for historical data analysis. The findings of this research show levels of service and flow rates throughout different zones and times of Mataf. They indicate the most critical zones and times for Tawaf during Hajj. They also visually demonstrate the track pattern of pedestrian movement at different locations in the Tawaf area. The paper concludes with some redesign recommendations to remove obstacles and facilitate pedestrian movement in Tawaf. The approach described in this paper can be implemented in architectural and urban design space modifications to improve pedestrian movement in open spaces.
keywords	Pedestrian movement analysis, GPS, GIS, Hajj, Makkah, Tawaf
series	DDSS
last changed	2008/09/01 17:06

_id	5d77
id	5d77
authors	Adriane Borda; Neusa Félix; Janice de Freitas Pires; Noélia de Moraes Aguirre.
year	2008
title	MODELAGEM GEOMÉTRICA NOS ESTÁGIOS INICIAIS DE APRENDIZAGEM DA PRÁTICA PROJETUAL EM ARQUITETURA. GEOMETRIC MODELING IN THE EARLY STAGES OF LEARNING PRACTICE ARCHITECTURAL DESIGN.
source	12th Iberoamerican Congress of Digital Graphics, SIGRADI, 2008, Havana. SIGRADI, Proceedings of the 12th Iberoamerican Congress of Digital Graphics.. Havana : Ministerio de Educacion Superior, 2008. p. 434-438.
summary	This work invests on delimitation of a Geometric Modeling study program directed to students at the initial stages of Architecture. It is considered that the studies promote a qualified control of the form based on recognition of parameters which define it, moreover it also allows the enlargement of the students geometric vocabulary, important to the architectural design activities. In this way, the program advances on the appropriation of new concepts which surround the investigations on architectural design processes, such as the concept of shape grammar. Observing analysis and architectural composition practices based on such concept, contents of geometric modeling which are already being used in the context of post-graduation are identified to be transposed to the graduation context, along with the initial teaching practices of architectural design. The results refer to making the didactic material available, these materials have the objective of building references for the development of design practice which explore the reflection about the processes of creation and composition of architectural form in their geometric aspects.
keywords	Architecture, Geometric Modeling, Shape grammar, Teaching/Learning
series	SIGRADI
type	normal paper
email
last changed	2016/03/10 09:47

_id	ijac20086405
id	ijac20086405
authors	Ahlquist, Sean; Fleischmann, Moritz
year	2008
title	Elemental Methods for Integrated Architectures: Experimentation with Design Processes for Cable Net Structures
source	International Journal of Architectural Computing vol. 6 - no. 4, 453-475
summary	Tension active systems are compelling architectural structures having an intimate connection between structural performance and the arrangement of material. The direct flow of structural forces through the material makes these systems attractive and unique from an aesthetic point of view, but they are a challenge to develop from a design and an engineering perspective. Traditional methods for solving such structural systems rely on both analog modeling techniques and the use of highly advanced engineering software. The complexity and laborious nature of both processes presents a challenge for iterating through design variations. To experiment with the spacemaking capabilities of tension active systems, it is necessary to design methods that can actively couple the digital simulation with the analog methods for building the physical structure. What we propose is a designer-authored process that digitally simulates the behaviors of tension active systems using simple geometric components related to material and structural performance, activated and varied through elemental techniques of scripting. The logics for manufacturing and assembly are to be embedded in the digital generation of form. The intention is to transform what is a highly engineered system into an architectural system where investigation is as much about the determination of space and environment as it is about the arrangement of structure and material.
series	journal
last changed	2009/03/03 07:48

_id	acadia08_118
id	acadia08_118
authors	Cabrinha, Mark
year	2008
title	Gridshell Tectonics: Material Values Digital Parameters
doi	https://doi.org/10.52842/conf.acadia.2008.118
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 118-125
summary	This paper begins with a simple proposition: rather than mimicking the geometric structures found in nature, perhaps the most effective modes of sustainable fabrication can be found through understanding the nature of materials themselves. Material becomes a design parameter through the constraints of fabrication tools, limitations of material size, and most importantly the productive capacity of material resistance—a given material’s capacity and tendencies to take shape, rather than cutting shape out of material. ¶ Gridshell structures provide an intriguing case study to pursue this proposition. Not only is there clear precedent in the form-finding experiments of Frei Otto and the Institute for Lightweight Structures, but also the very NURBS based tools of current design practices developed from the ability of wood to bend. Taking the bent wood spline quite literally, gridshells provide a means that is at once formally expressive, structurally optimized, materially efficient, and quite simply a delight to experience. The larger motivation of this work anticipates a parametric system linking the intrinsic material values of the gridshell tectonic with extrinsic criteria such as programmatic needs and environmental response. ¶ Through an applied case study of gridshells, the play between form and material is tested out through the author’s own experimentation with gridshells and the pedagogical results of two gridshell studios. The goal of this research is to establish a give-and-take relationship between top-down formal emphasis and a bottom-up material influence.
keywords	Digital Fabrication; Form-Finding; Material; Pedagogy; Structure
series	ACADIA
last changed	2022/06/07 07:54

_id	ecaade2008_064
id	ecaade2008_064
authors	Donath, Dirk; Braunes, Jörg; Fehlhaber, Daniel; Tauscher, Helga
year	2008
title	Sketch-Based Building Information Capture for Cost and Risk Assessment in the Early Stages of Planning in Existing Built Contexts
doi	https://doi.org/10.52842/conf.ecaade.2008.109
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 109-116
summary	The proportion of planning activity that concerns existing buildings is increasing steadily throughout Europe. In Germany it is estimated that already two thirds of architectural planning tasks are related to revitalisation, modernisation, conversion and reconstruction. For these types of projects in particular, clients are interested in obtaining an estimate of the building costs as early as possible. Because many details are unknown or can only be guessed, it is often difficult to make a reliable estimate. This article describes a software concept for the rapid, sketch-based capture of data on site with a view to obtaining a cost-assessment for a series of different revitalisation variants using a stochastic approach.
keywords	cost risk assessment, planning-relevant building surveying, geometric data capture, geometric representation, planning support, building information modelling, IFC
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2008_079
id	ecaade2008_079
authors	Hemmerling, Marco; Knaack, Ulrich; Schulz, Jens-Uwe
year	2008
title	Complexity in Digital Architectural Design
doi	https://doi.org/10.52842/conf.ecaade.2008.085
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 85-90
summary	The association of complexity and geometry was the starting point for an academic project at the chair of Computer Aided Design in Detmold. The students were asked to analyze a complex structure - taken from nature, art, technology or society - regarding the underlying geometrical rules and principles. The translation of these abstract geometric principles (logarithmic spiral, polyhedron, rotational solids, mesh-work, double helix…) into a three-dimensional structure was then realized in Rhinoceros. The 3D-modeling was followed by a transformation- and optimization-process of the initial shape by using the evolutionary principles of mutation and selection. The set-up for these variations followed predefined rules and principles for the manipulation of the original structure.
keywords	Geometry, Complexity, Computer Aided Design, Architecture
series	eCAADe
email
last changed	2022/06/07 07:49

_id	kasyanov02_paper_eaea2007
id	kasyanov02_paper_eaea2007
authors	Kasyanov, Nikolai
year	2008
title	Study of Architectural Shape Formation in Comparison with Natural Morphogenesis Using Computer Simulation
source	Proceedings of the 8th European Architectural Endoscopy Association Conference
summary	Geometric accuracy of architectural computer models allows to percept and to analyze the three-dimensional spatial compositions using computer images. The concepts and methodology of modern interdisciplinary science, in particular fractal geometry, have already been successfully applied in the various scientific fields, as astronomy, physics, chemistry, biology. Modern ecological paradigm does not separate human life and anthropogenic world from the natural environment considering all as unitary nonlinear ecosystem. The analysis of the architectural shape formation is a part of the study of morphogenesis in such different worlds, as non-living and living nature and man-made forms – real as well as virtual architecture.
keywords	morphogenesis, architectural landscape, computer simulations
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

_id	acadia08_472
id	acadia08_472
authors	Key, Sora; Mark D Gross; Ellen Yi-Luen Do
year	2008
title	Computing Spatial Qualities For Architecture
doi	https://doi.org/10.52842/conf.acadia.2008.472
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 472-477
summary	Computational representation of spatial qualities can lead us to a better understanding of how we construct spatial concepts. Analyses of spatial qualities can support architects in reasoning about the form of a configuration, helping them predict the consequences of a design. ¶ In this paper we present three definitions (enclosure, viewfield, continuity) that describe experiential qualities of architectural spaces. Our project aims to provide computable definitions to these qualities to describe common spatial experiences that are implicitly understood by architects. The description, using familiar terms, reveals the analytical structure of spatial qualities that is based on the geometry of the physical elements. ; We therefore introduce a graphic editor, Descriptor, that provides visualization of spatial qualities as the designer diagrams building elements. The system calculates perceived relationships (surrounded, visible, nearby, nearest) between a viewpoint and the architectural elements based on their geometric properties such as location and distance. The relationships are the components of the three qualities we define. We also present a use scenario to demonstrate how one might use our Descriptor system during early design. ¶ Descriptor is an attempt to formalize descriptions of the spatial qualities to help beginners understand how to make design decisions. In the future, we plan to extend the set of qualities and add detailed attributes of the physical elements to the system.
keywords	Analysis; Computation; Environment; Representation; Spatial
series	ACADIA
last changed	2022/06/07 07:52

_id	ecaade2008_204
id	ecaade2008_204
authors	Kieferle, Joachim; Katz, Neil; Thaleck, Kruno
year	2008
title	From Shape to Fabrication
doi	https://doi.org/10.52842/conf.ecaade.2008.537
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 537-544
summary	There is a close relation between building design and fabrication. However still it is mostly a sequential process where the fabrication with its geometric chances and limitations is only to a small extend taken into account in early design phases. In this paper we describe a protoype form work project, realized out of styrofoam cut out with a CNC hot wire-cutting system and coated with the Claraporon coating system. Due to the linear nature of hot wire cutting the surfaces that can be created are ruled surfaces. They are discussed in a more general way as well as first exercises with ruled surfaces in teaching.
keywords	Digital fabrication, Form work, Ruled surface
series	eCAADe
email
last changed	2022/06/07 07:52

_id	sigradi2008_081
id	sigradi2008_081
authors	Kirschner, Ursula
year	2008
title	Study of digital morphing tools during the design process - Application of freeware software and of tools in commercial products as well as their integration in AutoCAD
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This research work examines methods of experimental designing with CAAD in a CAD laboratory with architecture students as the testing persons. Thereby the main focus is on the early phase of finding forms, in which different techniques with digital media are tried out in the didactic architectural design lessons. In these work have been traced the influences of the media employed on the design processes and combined the approaches of current CAAD research with aspects from classic design theory. For mathematical rules of proportion, atmospheric influence factors and analogy concepts in architecture, I have developed design methods which have been applied and verified in several series of seminars. (Kirschner, U.: 2000, Thesis, a CAAD supported architectural design teaching, Hamburg, school of arts). Previous experimental exercises showed that morphological sequences of modeling are effective sources for playful designing processes. In the current work these approaches are enhanced and supplemented by different morphological architectural concepts for creating shapes. For this purpose 2D based software like Morphit, Winmorph and other freeware were used. Whereas in the further development of this design technique we used 3D freeware morphing programs like zhu3D or Blender. The resulting morphological shapes were imported in CAD and refined. Ideally the morphing tool is integrated in the modeling environment of the standard software AutoCAD. A digital city model is the starting basis of the design process to guarantee the reference to the reality. The applied design didactic is predicated on the theories of Bernhard Hoesli. The act of designing viewed as „waiting for a good idea“ is, according to him, unteachable; students should, in contrast, learn to judge the „the force of an idea“. On the subject of morphology a form-generating method in the pre-design phase has been tested. Starting from urban-planning lines on an area map, two simple geometric initial images were produced which were merged by means of morphing software. Selected images from this film sequence were extruded with CAAD to produce solid models as sectional drawings. The high motivation of the students and the quality of the design results produced with these simple morphing techniques were the reason for the integration of the artistic and scientific software into the creative shape modeling process with the computer. The students learned in addition to the „bottom up “and „ top down” new design methods. In the presentation the properties and benefits of the morphing tools are presented in tables and are analyzed with regard to the architectural shape generating in an urban context. A catalogue of criteria with the following topics was developed: user friendliness, the ability of integrating the tools or as the case may be the import of data into a CAD environment, the artistic aspects in terms of the flexibility of shape generating as well as the evaluation of the aesthetic consideration of shapes.
keywords	Architectural design, freeware morphing software, AutoCAD
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	caadria2008_22_session3a_180
id	caadria2008_22_session3a_180
authors	Li, Li; Jingwen Gu, Jing Ma
year	2008
title	A solution of geometric security based on autoCAD
doi	https://doi.org/10.52842/conf.caadria.2008.180
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 180-184
summary	There are numerous electronic blueprints used in engineering today. The geometric security of these blueprints is a big problem to be solved. Based on the research on CAD system mechanics, this paper gives a solution that makes geometric access and use secure,, and gives an implementation on AutoCAD system. It designs a new encryption system compatible with the built-in encryption according to the exploration of variants and commands mechanism in AutoCAD system, and the analysis of structure of drawing database. The solution provides a safe access to files for different level users, and it places the control of edit authority on special geometrics via adding customized objects which contains authority information and password to the graphic information database.
keywords	geometric security, order mechanism, customized object
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	madrazo02_paper_eaea2007
id	madrazo02_paper_eaea2007
authors	Madrazo, Leandro; Gonçal Costa
year	2008
title	In-Space: Learning to Give Form to Space
source	Proceedings of the 8th European Architectural Endoscopy Association Conference
summary	A perspective represents space as seen from the outside, with the eye of the transcendental subject; an eye –represented by a geometric view point– which not only sees a space, but a space as it is seen by the subject. Motion is inherent to our experience of space which is not fixed and static –like a perspective assumes– but dynamic.
keywords	space conception, space perception, space representation, computer-supported collaborative learning
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

_id	ijac20086401
id	ijac20086401
authors	Maleki, Maryam M.; Woodbury, Robert F.
year	2008
title	Reinterpreting Rasmi Domes with Geometric Constraints:A Case of Goal-seeking in Parametric Systems
source	International Journal of Architectural Computing vol. 6 - no. 4, 375-395
summary	Geometry has long been a generator of architecture. In traditional Persian architecture, Rasmi domes project a drawing onto a predefined 3D geometry. In fact, the word 'rasmi' and the verb for drawing in Persian have the same linguistic root. Projection is readily done in manual drawings or conventional CAD programs. From a constraint perspective, the dome is constrained by the drawing and the 3D geometry. If the latter constraint is replaced by invariance of distance on the original drawing, a class of domes results, but members of this class cannot be computed conventionally. Class members are developable from a planar layout of triangles, which is, in turn, generated by a simple drawing rule. This yields a parametric structure of four parameters. Three determine the initial planar diagram. One determines configuration. Further, domes in the class are mechanisms: they are not fully specified by the constraints and parameters. We develop the geometric constraints representing the location of the defining points of a dome and present a goal-seeking algorithm to solve the constraints within a propagation-based parametric modeling system.
series	journal
last changed	2009/03/03 07:48

_id	caadria2008_45_session4b_364
id	caadria2008_45_session4b_364
authors	Muramoto, Katsuhiko; Sonali Kumar, Michael Jemtrud, Danielle Wiley
year	2008
title	Participation, Intersubjectivity, And Presence In a Digitally Mediated Workspace: A Participatory Design Studio between Pennsylvania State University and Carleton University
doi	https://doi.org/10.52842/conf.caadria.2008.364
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 364-370
summary	A paradigm shift in the world of architecture brought by the recent developments in visualization and communication technology not only offers us drastically different ways to collaborate, but also questions traditional location dependent collaborations. This new technology offers us new possibilities for a more phenomenologically rich mode of creative activity and participation. The goal of the Participatory Design Studio was to allow architecture students in multiple locations to collaborate in real-time by sharing computational resources, geometric datasets, and multimedia content including high-definition video. The technologies involved in this research include the National LambdaRail (layer 3, PacketNet with 1Gb/s connection) and CA*net 4 (Canadian broadband layer 2 with 10gb/s lightpath connectivity) allowing Standard Definition videoconference, utilization of Deep Computing Visualization, Remote Visual Networking (RVN) and Web Service access and control of the APN devices through the dashboard solution that makes integration seamless to the workflow and transparent to the user.
keywords	design: collaboration; tele-presence; visualization; broadband
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	sigradi2008_166
id	sigradi2008_166
authors	Papanikolaou, Dimitris
year	2008
title	Digital Fabrication Production System Theory: Towards an Integrated Environment for Design and Production of Assemblies
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	A Digital Fabrication Production System (DFPS) is a concept describing a set of processes, tools, and resources that will be able to produce an artifact according to a design, fast, cheap, and easy, independently of location. A DFPS project is a complex assembly of custom parts that is delivered by a network of fabrication and assembly processes. This network is called the value chain. The workflow concept of a DFPS is the following: begin design process with a custom geometric form; decompose it into constructible parts; send the part files for fabrication to various locations; transport all parts at the construction site at the right time; finally, assemble the final artifact. Conceptually it means that based on a well structured value chain we could build anything we want, at anyplace, at controllable cost and quality. The goals of a DFPS are the following: custom shapes, controllable lead time, controllable quality, controllable cost, easiness of fabrication, and easiness of assembly. Simply stated this means to build any form, anywhere, accurately, cheap, fast, and easy. Unfortunately, the reality with current Digital Fabrication (DF) projects is rather disappointing: They take more time than what was planned, they get more expensive than what was expected, they involve great risk and uncertainty, and finally they are too complex to plan, understand, and manage. Moreover, most of these problems are discovered during production when it is already late for correction. However, there is currently no systematic approach to evaluate difficulty of production of DF projects in Architecture. Most of current risk assessment methods are based on experience gathered from previous similar cases. But it is the premise of mass customization that projects can be radically different. Assembly incompatibilities are currently addressed by building physical mockups. But physical mockups cause a significant loss in both time and cost. All these problems suggest that an introduction of a DFPS for mass customization in architecture needs first an integrated theory of assembly and management control. Evaluating feasibility of a DF project has two main problems: first, how to evaluate assemblability of the design; second, how to evaluate performance of the value chain. Assemblability is a system’s structure problem, while performance is a system’s dynamics problem. Structure of systems has been studied in the field of Systems Engineering by Network Analysis methods such as the Design Structure Matrix (DSM) (Steward 1981), and the liaison graph (Whitney 2004), while dynamics of systems have been studied by System Dynamics (Forrester 1961). Can we define a formal method to evaluate the difficulty of production of an artifact if we know the artifact’s design and the production system’s structure? This paper formulates Attribute Process Methodology (APM); a method for assessing feasibility of a DFPS project that combines Network Analysis to evaluate assemblability of the design with System Dynamics to evaluate performance of the value chain.
keywords	Digital Fabrication, Production System, System Dynamics, Network Analysis, Assembly
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	caadria2008_28_session3b_229
id	caadria2008_28_session3b_229
authors	Park, Young-Kyu and Hyoung-June Park
year	2008
title	The study of environmental sustainability in the 19th century traditional korean residence, Yeongyeongdang
doi	https://doi.org/10.52842/conf.caadria.2008.229
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 229-235
summary	In this paper, one of traditional Korean residential buildings in the 19th century, Yeongyeongdang, is selected as a model to demonstrate the achievement of the environmental sustainability in the formal composition of traditional Korean architecture. With a computational analysis on the geometric model of Yeongyeongdang using Ecotect, this paper investigates the ecological characteristics employed in the design of the traditional Korean residence and the applications of the sustainable principles for its spatial system.
keywords	Environmental factors; Simulation; Yeongyeongdang
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	acadia08_134
id	acadia08_134
authors	Peters, Brady
year	2008
title	Copenhagen Elephant House: A Case Study of Digital Design Processes
doi	https://doi.org/10.52842/conf.acadia.2008.134
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 134-141
summary	This paper outlines the digital design processes involved in the design and construction of the new Elephant House at Copenhagen Zoo. Early design concepts for the canopy were tested using physical sketch models. The geometric complexity of these early physical models led to the involvement of the Specialist Modelling Group and the use of the computer to digitally sketch 3D CAD models. After many studies, the complex form of the canopies was rationalised using torus geometry. A computer program was written to generate the canopy glazing and structure. This parametric system was developed to be a design tool, and was developed by an architectural designer working with the team. Through its use the team were able to explore more design options, and alter the design farther along in the design process; however, this generative tool was created largely as a CAD efficiency tool. Another series of computer programs were written to generate and populate a shading system based on environmental analysis. Unlike the computer program that generated the structure and glazing, this program was not developed to make the generation of complex geometric structures more efficient, but developed to explore computational approaches that would have been impossible without the computer. Most of the canopy’s design was communicated to fabricator through a geometry method statement, a method that has been proven to be effective in the past. The project completed in June 2008.
keywords	Complex Geometry; Computation; Design; Generative; Sustainability
series	ACADIA
last changed	2022/06/07 08:00

For more results click below: