Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 491

Reformat results as: short short into frame detailed detailed into frame

_id	acadia08_182
id	acadia08_182
authors	Gibson, Michael; Kevin R. Klinger; Joshua Vermillion
year	2008
title	Constructing Information: Towards a Feedback Ecology in Digital Design and Fabrication
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 182-191
doi	https://doi.org/10.52842/conf.acadia.2008.182
summary	As strategies evolve using digital means to navigate design in architecture, critical process-based approaches are essential to the discourse. The often complex integration of design, analysis, and fabrication through digital technologies is wholly reliant upon a process-basis necessitating the use of a design feedback loop, which reinforces critical decision-making and challenges the notions of how we produce, visualize, and analyze information in the service of production and assembly. Central to this process-based approach is the effective and innovative integration of information and the interrogation of material based explorations in the making of architecture. This fabrication ‘ecology’ forces designers to engage complexity and accept the unpredictability of emergent systems. It also exposes the process of working to critique and refine feedback loops in light of complex tools, methods, materials, site, and performance considerations. In total, strategies for engaging this ‘ecology’ are essential to accentuate our present understanding of environmental design and theory in relation to digital processes for design and fabrication. ¶ This paper recounts a design/fabrication seminar entitled “Constructing Information” in which architecture students examined an environmental design problem by way of the design feedback loop, where their efforts in applying digital design and fabrication methods were driven explicitly by material and site realities and where their work was executed, installed, and critically explored in situ. These projections raise important questions about how information, complexity, and context overlay and merge, and underscore the critical potential of visual, spatial, and material effects as part of a fabrication-oriented design process.
keywords	Digital Fabrication; Ecology; Environment; Feedback; Performance
series	ACADIA
last changed	2022/06/07 07:51

_id	ecaade2015_265
id	ecaade2015_265
authors	Hosey, Shannon; Beorkrem, Christopher, Damiano, Ashley, Lopez, Rafael and McCall, Marlena
year	2015
title	Digital Design for Disassembly
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 371-382
doi	https://doi.org/10.52842/conf.ecaade.2015.2.371
wos	WOS:000372316000043
summary	The construction and building sector is now widely known to be one of the biggest energy consumers, carbon emitters, and creators of waste. Some architectural agendas for sustainability focus on energy efficiency of buildings that minimize their energy intake during their lifetime - through the use of more efficient mechanical systems or more insulative wall systems. One issue with these sustainability models is that they often ignore the hierarchy of energy within architectural design. The focus on the efficiency is but one aspect or system of the building assembly, when compared to the effectiveness of the whole, which often leads to ad-hoc ecology and results in the all too familiar “law of unintended consequences” (Merton, 1936). As soon as adhesive is used to connect two materials, a piece of trash is created. If designers treat material as energy, and want to use energy responsibly, they can prolong the lifetime of building material by designing for disassembly. By changing the nature of the physical relationship between materials, buildings can be reconfigured and repurposed all the while keeping materials out of a landfill. The use of smart joinery to create building assemblies which can be disassembled, has a milieu of new possibilities created through the use of digital manufacturing equipment. These tools afford designers and manufacturers the ability to create individual joints of a variety of types, which perform as well or better than conventional systems. The concept of design for disassembly is a recognizable goal of industrial design and manufacturing, but for Architecture it remains a novel approach. A classic example is Kieran Timberlake's Loblolly House, which employed material assemblies “that are detailed for on-site assembly as well as future disassembly and redeployment” (Flat, Inc, 2008). The use of nearly ubiquitous digital manufacturing tools helps designers create highly functional, precise and effective methods of connection which afford a building to be taken apart and reused or reassembled into alternative configurations or for alternative uses. This paper will survey alternative energy strategies made available through joinery using digital manufacturing and design methods, and will evaluate these strategies in their ability to create diassemblable materials which therefore use less energy - or minimize the entropy of energy over the life-cycle of the material.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=4075520a-6fe7-11e5-bcc8-f7d564ea25ed
last changed	2022/06/07 07:50

_id	acadia08_382
id	acadia08_382
authors	Peters, Brady; Xavier De Kestelier
year	2008
title	Rapid Prototyping and Rapid Manufacturing at Foster + Partners
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 382-389
doi	https://doi.org/10.52842/conf.acadia.2008.382
summary	Over the last 15 years, rapid prototyping has been an integral part of the design process in the car and aerospace industry (Brad Fox 2006). Recently the architecture profession has started to use these techniques in its design process (Greg Corke 2006), and some architecture schools have begun experimenting with these technologies. ¶ Foster + Partners have been one of the first architecture practices to fully integrate rapid prototyping within its design process. The technology was initially seen as a sketch model making tool in the early stages of the design, in particular for projects with complicated geometries. It surpassed this purpose within a year and it is now seen an essential design tool for many projects and in for many project stages. The office’s rapid prototyping department now produces about 3500 models a year. ¶ Besides, or perhaps because of, rapid prototyping, Foster + Partners have started to experiment with rapid manufacturing. This first was done through the design and manufacture of a Christmas tree for the charity organisation Save the Children.
keywords	Complex Geometry; Design; Generative; Process; Rapid Prototyping
series	ACADIA
last changed	2022/06/07 08:00

_id	acadia11_152
id	acadia11_152
authors	Rael, Ronald; San Fratello, Virginia
year	2011
title	Developing Concrete Polymer Building Components for 3D Printing
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 152-157
doi	https://doi.org/10.52842/conf.acadia.2011.152
summary	The creation of building components that can be seen as sustainable, inexpensive, stronger, recyclable, customizable and perhaps even reparable to the environment is an urgent, and critical focus of architectural research. In the U.S. alone, the construction industry produced 143.5 million tons of building-related construction and demolition debris in 2008, and buildings, in their consumption of energy produce more greenhouse gasses than automobiles or industry.Because the inherent nature of 3D printing opens new possibilities for shaping materials, the process will reshape the way we think about architectural building components. Digital materiality, a term coined by Italian and Swiss architects Fabio Gramazio and Matthias Kohler, describes materiality increasingly enriched with digital characteristics where data, material, programming and construction are interwoven (Gramazio and Kohler, 2008). The research aspires towards this classification through the use of parametric modeling tools, analytic software and quantitative and qualitative analysis. Rapid prototyping, which is the automatic construction of physical objects using additive manufacturing technology, typically employs materials intended for the immediate analysis of form, scale, and tactility. Rarely do the materials used in this process have any long-term value, nor does the process - except in rare cases with expensive metal prototyping - have the ability to create actual and sustainable working products. This research intends to alter this state of affairs by developing methods for 3D printing using concrete for the production of long-lasting performance-based components.
series	ACADIA
type	work in progress
email
last changed	2022/06/07 08:00

_id	caadria2008_64_session6b_529
id	caadria2008_64_session6b_529
authors	Rügemer, Jörg
year	2008
title	Form Follows Tool: How the mere existence of a 2D laser cutter does influences architectural design in education?
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 529-535
doi	https://doi.org/10.52842/conf.caadria.2008.529
summary	The paper is aimed to examine the influence of a digital laser cutter on the design process within the College of Architecture and Planning, University of Utah, Salt Lake City. The tool functions as a peripheral output device within a simple “CAD-CAM” model manufacturing process in the area of architectural model making. It is a 2D laser cutter, accessible to the students since four years. The paper has a critical look at how the machine’s availability, its possibilities, as well as its promising time saving potential has changed the way students develop their design and process their projects. Rapid prototyping is becoming more and more an integral and important part of our design studios. With the adoption of the laser cutter, the model making procedure has changed from a relatively time-consuming, but immediately controllable process, to a procedure where one has to spatially re-think the elements that need to be produced, in order to adapt to the necessary digital workflow or process.
keywords	2D Laser Cutter, Digital Design Development, Digital Model Manufacturing Process, Analogue Model Assemblage
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	5d77
id	5d77
authors	Adriane Borda; Neusa Félix; Janice de Freitas Pires; Noélia de Moraes Aguirre.
year	2008
title	MODELAGEM GEOMÉTRICA NOS ESTÁGIOS INICIAIS DE APRENDIZAGEM DA PRÁTICA PROJETUAL EM ARQUITETURA. GEOMETRIC MODELING IN THE EARLY STAGES OF LEARNING PRACTICE ARCHITECTURAL DESIGN.
source	12th Iberoamerican Congress of Digital Graphics, SIGRADI, 2008, Havana. SIGRADI, Proceedings of the 12th Iberoamerican Congress of Digital Graphics.. Havana : Ministerio de Educacion Superior, 2008. p. 434-438.
summary	This work invests on delimitation of a Geometric Modeling study program directed to students at the initial stages of Architecture. It is considered that the studies promote a qualified control of the form based on recognition of parameters which define it, moreover it also allows the enlargement of the students geometric vocabulary, important to the architectural design activities. In this way, the program advances on the appropriation of new concepts which surround the investigations on architectural design processes, such as the concept of shape grammar. Observing analysis and architectural composition practices based on such concept, contents of geometric modeling which are already being used in the context of post-graduation are identified to be transposed to the graduation context, along with the initial teaching practices of architectural design. The results refer to making the didactic material available, these materials have the objective of building references for the development of design practice which explore the reflection about the processes of creation and composition of architectural form in their geometric aspects.
keywords	Architecture, Geometric Modeling, Shape grammar, Teaching/Learning
series	SIGRADI
type	normal paper
email
last changed	2016/03/10 09:47

_id	acadia08_272
id	acadia08_272
authors	Perez, Santiago R.
year	2008
title	Crafting Complexity: Material / Procedure / Form
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 272-277
doi	https://doi.org/10.52842/conf.acadia.2008.272
summary	What is the role of Craft, in understanding Bio-Computational Forms & Systems? What is the relation between self-organizing systems & material-component assemblages? ¶ This paper will explore the relationship between material craft, procedure and form, in relation to complex, self-organizing assemblies. A comparison will be made, between (hand) crafted assemblies, guided by physical constraints and procedural methodologies, and digitally mediated fabrication, guided by recursion and algorithmic generative methodologies. ¶ An attempt will be made to connect various scales of making, in terms of module or unit of assembly, both at the micro-scale of biological structures, and the macro-scale of man-made systems. The goal of this essay is to question the relation between physically crafted component assemblies, as a means for exploring adaptive, complex, self-organizing systems, and bio-computational paradigms as a source of adaptive strategies for making.
keywords	Adaptation; Complexity; Craft; Material; Play
series	ACADIA
last changed	2022/06/07 08:00

_id	acadia05_200
id	acadia05_200
authors	Tsou, J.-Y., Chan Yi Lee, Mak Kwok Pui, Ru Xu Du, Liang Jian, Yeung Kim
year	2005
title	Applying Scientific Simulation to Integrate Thermoelectric Conductor Module into Architectural Design – Smart Wall for Thermal Comfort
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 200-210
doi	https://doi.org/10.52842/conf.acadia.2005.200
summary	This paper presents the innovative architectural design concept, which is to integrate the new material and technology into the building design to achieve the thermal comfort and at the same time reduce the energy consumption of the building by making use of the renewable energy, including solar and wind energy. The system is developed based on the idea of regional thermal comfort in building. The advantage of the system is the environmental friendly approach, costless operation, reliability, flexibility, scalability and adaptability for the integration to the building design. With the design concept, we tried to do two application designs in two virtual sites. One is a badminton court for the 2008 Beijing Olympic Games and the other is a cooling pond in a shopping mall. We will introduce how computational simulation can contribute to the prediction of the performance of the design. We will also discuss how the computation simulation can help in the design optimization process. Through the development of the new design integration of the material to the building, we would like to feedback to the material industry to encourage further collaboration and development in the material enhancement, so that both industries and the society can benefit from the advancement.
series	ACADIA
email
last changed	2022/06/07 07:57

_id	cdc2008_229
id	cdc2008_229
authors	Asut, Serdar
year	2008
title	Rethinking the Creative Architectural Design in the Digital Culture
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 229-234
summary	This paper tries to examine the effects of emerging digital tools in architectural design. Digital tools are not only practical instruments used for drawing, but they also affect design thinking. As the ones that are used in architectural design are mostly commercial, one can say that design thinking, the identity of the design and the creativity of the designer are defined by the companies which develop these tools. Therefore architects have to be able to manipulate these tools and personalize them in order to free their design thinking and creativity. This paper addresses the open source development in order to redefine creativity in architecture of digital culture.
keywords	Design Tools, Digital Culture, CAD Software, Open Source
email
last changed	2009/01/07 08:05

_id	ijac20086405
id	ijac20086405
authors	Ahlquist, Sean; Fleischmann, Moritz
year	2008
title	Elemental Methods for Integrated Architectures: Experimentation with Design Processes for Cable Net Structures
source	International Journal of Architectural Computing vol. 6 - no. 4, 453-475
summary	Tension active systems are compelling architectural structures having an intimate connection between structural performance and the arrangement of material. The direct flow of structural forces through the material makes these systems attractive and unique from an aesthetic point of view, but they are a challenge to develop from a design and an engineering perspective. Traditional methods for solving such structural systems rely on both analog modeling techniques and the use of highly advanced engineering software. The complexity and laborious nature of both processes presents a challenge for iterating through design variations. To experiment with the spacemaking capabilities of tension active systems, it is necessary to design methods that can actively couple the digital simulation with the analog methods for building the physical structure. What we propose is a designer-authored process that digitally simulates the behaviors of tension active systems using simple geometric components related to material and structural performance, activated and varied through elemental techniques of scripting. The logics for manufacturing and assembly are to be embedded in the digital generation of form. The intention is to transform what is a highly engineered system into an architectural system where investigation is as much about the determination of space and environment as it is about the arrangement of structure and material.
series	journal
last changed	2009/03/03 07:48

_id	caadria2008_27_session3b_221
id	caadria2008_27_session3b_221
authors	Al-Haddad, Tristan
year	2008
title	Parametric modulations in Masonry
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 221-228
doi	https://doi.org/10.52842/conf.caadria.2008.221
summary	The focus of the research presented in this paper asks how a designer can create a flexible system of physical making which can accommodate multiple programmatic functions within a smooth whole, rather than creating an a priori singular formal object. This adaptable system of construction works through the development of an intelligent CAD model that can be mapped to a flexible manufacturing mechanism, i.e. a reconfigurable mold. This system of manufacturing can be used to cast totally unique solid modules without creating a unique mold for each part by manipulating the topological structure of the system. This approach takes the notion of mass-customization beyond the expensive and unsustainable one-offs that the design world has seen recently, and into a new paradigm of a sustainable, economically viable world of mass-customizable form and space.
keywords	Parametrics, Variability, Reconfigurability, UHPC, Topology, Molding, Casting
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia11_242
id	acadia11_242
authors	Braumann, Johannes; Brell-Cokcan, Sigrid
year	2011
title	Parametric Robot Control: Integrated CAD/CAM for Architectural Design
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 242-251
doi	https://doi.org/10.52842/conf.acadia.2011.242
summary	Robots are gaining popularity in architecture. Snøhetta has recently purchased their own industrial robot, becoming one of the first architectural offices to adopt robot technology. As more and more architects are exposed to robotic fabrication, the need for easy interoperability, integration into architectural design tools and general accessibility will increase. Architects are discovering that industrial robots are much more than kinematic machines for stacking bricks, welding or milling - they are highly multifunctional and can be used for a huge variety of tasks. However, industry standard software does not provide easy solutions for allowing direct robot control right from CAAD (Computer Aided Architectural Design) systems. In this paper we will discuss existing methods of programming industrial robots, published architectural results (Gramazio and Kohler 2008) and the design of a new user interface that allows intuitive control of parametric designs and customized robotic mass production, by integrating CAM (Computer Aided Manufacturing) functions into CAAD.
keywords	robot programming; parametric design; mass customization; grasshopper component design; fabrication; robot milling; digital architecture
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaade2008_005
id	ecaade2008_005
authors	Breen, Jack; Stellingwerff, Martijn
year	2008
title	Capital A to Z
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 759-766
doi	https://doi.org/10.52842/conf.ecaade.2008.759
summary	Throughout the history of architecture, the Capital – the intermediate between a column and the beam or surface it supports – has been a recurring feature in architectural composition and articulation. In this paper we describe results and findings from the Capital A to Z exercise within the Ornamatics Course from the TU-Delft MSc curriculum. We will show how this exercise combines various digital and physical processes for form finding and how further insights can come from the actual production of models and prototypes. Conclusions will be drawn regarding the integrated educational setup and regarding the influence of different methods and tools on the design process and the design results.
keywords	Computer aided manufacturing and modelling, composition, prototyping, ornamatics, education-based research
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia08_458
id	acadia08_458
authors	Hemsath, Timothy; Robert Williams; Ronald Bonnstetter; Leen-Kiat Soh
year	2008
title	Digital CADCAM Pedagogy Model: Intelligent Inquiry Education
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 458-463
doi	https://doi.org/10.52842/conf.acadia.2008.458
summary	Prototype manufacturing as an educational tool has been very successful at the college level in architecture and engineering design. This paper discusses an innovative inquiry-based learning approach rather than the problem-based learning models commonly utilized by other similar programs. For example, several research-funded technology projects (e.g., Cappelleri et al. 2007) look at involving students in problem-based learning exercises (e.g., building robots); however, these exercises (while providing valuable experiences) have predetermined outcomes ingrained by the teachers, the project structure, and the components used to construct the devices. Therefore, inquisitive and creative problem solving is limited to the “kit-of-parts” in their approach to solving the problem. The inquiry-based CADCAM pedagogy model is more concerned with the process of solving a problem through the vehicle of prototyping than with the specificity of the design project itself. This approach has great potential. First, the need to solve the problem drives learning on multiple levels, integrating interdisciplinary ideas into the problem and solution. Second, the problem interlocks disciplines through inquiry knowledge building in team exercises. Finally, it encourages diversity and flexibility by allowing students to look at problems from multiples perspectives and points of view.
keywords	CAD; Education; Evaluation; Pedagogy; Rapid Prototyping
series	ACADIA
last changed	2022/06/07 07:49

_id	sigradi2008_175
id	sigradi2008_175
authors	Knight, Terry; Larry Sass, Kenfield Griffith, Ayodh Vasant Kamath
year	2008
title	Visual-Physical Grammars
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This paper introduces new visual-physical design grammars for the design and manufacture of building assembly systems that provide visually rich, culturally resonant design variations for housing. The building systems are intended to be tailored for particular cultures and communities by incorporating vernacular, decorative design into the assembly design. Two complementary areas of computational design research are brought together in this work: shape grammars and digital fabrication. The visual or graphic aspects of the research are explored through shape grammars. The physical design and manufacturing aspects are explored through advanced digital design and fabrication technologies and, in particular, build on recent work on mono-material assemblies with interlocking components that can be fabricated with CNC machines and assembled easily by hand on-site (Sass, 2007). This paper describes the initial, proof-of-concept stage of this work: the development of an automated, visual-physical grammar for an assembly system based on a vernacular language of Greek meander designs. A shape grammar for the two-dimensional Greek meander language (Knight, 1986) was translated into a three-dimensional assembly system. The components of the system are uniquely designed, concrete “meander bricks” (Figure 1). The components have integrated alignment features so that they can be easily fitted and locked together manually without binding materials. Components interlock horizontally to form courses, and courses interlock vertically in different ways to produce a visual variety of meander walls. The assembly components were prototyped at desktop scale with a layered manufacturing machine to test their appearance after assembly and their potential for design variations (Figure 2). Components were then evaluated as full-scale concrete objects for satisfaction of physical constraints related to concrete forming and component strength. The automated grammar (computer program) for this system generates assembly design variations with complete CAD/CAM data for fabrication of components formed from layered, CNC cut molds. Using the grammar, a full-scale mockup of a corner wall section was constructed to assess the structural, material, and aesthetic feasibility of the system, as well as ease of assembly. The results of this study demonstrate clearly the potentials for embedding visual properties in structural systems. They provide the foundations for further work on assembly systems for complete houses and other small-scale structures, and grammars to generate them. In the long-term, this research will lead to new solutions for economical, easily manufactured housing which is especially critical in developing countries and for post-disaster environments. These new housing solutions will not only provide shelter but will also support important cultural values through the integration of familiar visual design features. The use of inexpensive, portable digital design and fabrication technologies will allow local communities to be active, cooperative participants in the design and construction of their homes. Beyond the specific context of housing, visual-physical grammars have the potential to positively impact design and manufacture of designed artifacts at many scales, and in many domains, particularly for artifacts where visual aesthetics need to be considered jointly with physical or material requirements and design customization or variation is important.
keywords	Shape grammar, digital fabrication, building assembly, mass customization, housing
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	ecaade2008_009
id	ecaade2008_009
authors	Lyon , Eduardo R.
year	2008
title	Knowledge Based Design and Digital Manufacturing:
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 625-632
doi	https://doi.org/10.52842/conf.ecaade.2008.625
summary	This research explores new ways to integrate manufacturing knowledge in to design phases. Through the use of design for manufacturing (DfM) concept, and looking at relations between its potential application in component design and its implementation using digital manufacturing technologies, the author implemented a DfM model that varies from previous models by incorporated learning in the process. This process was based on the incremental development and refinement of design heuristics and metrics. The DfM model developed in this research is a process model to be implemented as a framework within educational settings. The final purpose is to provide better foundational constructs for design education and to improve teaching approaches that integrate design and manufacturing.
keywords	Design Computing, Design for manufacturing, Knowledge Based Design, Digital Manufacturing
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2008_045
id	ecaade2008_045
authors	Pinochet, Diego; Labarca, Claudio; Burdiles, Macarena
year	2008
title	Dichotomy between Digital Project and Real Project Execution
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 587-592
doi	https://doi.org/10.52842/conf.ecaade.2008.587
summary	This paper relates the experience of the author in finding digital tools to generate diversity of results in the design process of one project, aiming to generate base tools developed in the form of script codes, that may operate in diverse fields of action reacting to the diverse variables characteristics of each place, The development of the script is what allows this to happen.
keywords	Digital Design: Manufacturing, Scripting, Programming, CAD + CAM
series	eCAADe
email
last changed	2022/06/07 08:00

_id	ecaade2008_010
id	ecaade2008_010
authors	R. Lyon , Eduardo
year	2008
title	CAD and CAM Systems Integration:
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 837-844
doi	https://doi.org/10.52842/conf.ecaade.2008.837
summary	CAM systems traduce design information from CAD systems in to different manufacturing routines in order to produce NC code for CNC machinery. The output from the CAM software is usually a simple text file of G and M code, usually containing thousand of lines of code. Later this code is transferred to a machine tool using a direct numerical control (DNC) program. This translation process becomes extremely important in developing a digital design and fabrication approach. Consequently the aim in this research is; to investigate CAD-CAM workflow; to analyze final product deviation from design intent; and to determine where in the workflow, and how design strategies and design decisions correlates to manufacturing results.
keywords	Design Computing, CAD and CAM integration, Digital fabrication
series	eCAADe
email
last changed	2022/06/07 08:00

_id	acadia08_066
id	acadia08_066
authors	Ahlquist, Sean; Moritz Fleischmann
year	2008
title	Material & Space: Synthesis Strategies based on Evolutionary Developmental Biology
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 66-71
doi	https://doi.org/10.52842/conf.acadia.2008.066
summary	A material system can be defined as a set of self-organized materials, defining a certain spatial arrangement. In architecture, this material arrangement acts as a threshold for space, though space often only appears as a by-product of the material organization. Treating space as a resulting, therefore secondary, independent product minimizes the capacity to generate architecture that is astutely aware of concerns of functionality, environment and energy. An effective arrangement of material can only be determined in relation to the spaces that it defines. When proposing a more critical approach, a material system can be seen as an intimate inter-connection and reciprocal exchange between the material construct and the spatial conditions. It is necessary to re-define material system as a system that coevolves spatial and material configurations through analysis of the resultant whole, in a process of integration and evaluation. ¶ With this understanding of material system comes an expansion in the number of criteria that are simultaneously engaged in the evolution of the design. The material characteristics, as well as the spatial components and forces (external and internal), are pressures onto the arrangement of material and space. ¶ This brings a high degree of complexity to the process. Biological systems are built on methods that resolve complex interactions through sets of simple yet extensible rules. Evolutionary Developmental Biology explains how growth is an interconnected process of external forces registering fitness into a fixed catalogue of morphological genetic tools. Translating the specific framework for biological growth into computational processes, allows the pursuit of an architecture that is fully informed by the interaction of space and material.
keywords	Biology; Computation; Material; Parametric; System
series	ACADIA
last changed	2022/06/07 07:54

_id	acadia08_364
id	acadia08_364
authors	Bonwetsch, Tobias; Ralph Baertschi ;Silvan Oesterle
year	2008
title	Adding Performance Criteria to Digital Fabrication: Room-Acoustical Information of Diffuse Respondent Panels
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 364-369
doi	https://doi.org/10.52842/conf.acadia.2008.364
summary	In this research project we explore the defined design and application of digitally fabricated wall panels for room-acoustical architectural interventions. In Particular, we investigate the room-acoustical criteria applying to everyday used spaces. We present a digital design and fabrication process developed to create non-standardised panels and two case studies which apply this process on the acoustical improvement of a specific room situation. Our aim is to find correlations between digitally fabricated surface structures and sound- aesthetical characteristics, in order to utilise these for the architectural design.
keywords	Acoustics; Digital Fabrication; Evaluation; Material; Robotics
series	ACADIA
last changed	2022/06/07 07:54

For more results click below: