Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 483

Reformat results as: short short into frame detailed detailed into frame

_id	ddss2008-33
id	ddss2008-33
authors	Charlton, James A.; Bob Giddings and Margaret Horne
year	2008
title	A survey of computer software for the urban designprocess
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Urban design is concerned with the shape, the surface and the physical arrangement of all kinds of urban elements, the basic components that make up the built environment, at the level of buildings, spaces and human activities. It is also concerned with the non-visual aspects of the environment, such as noise, wind and temperature and humidity. The city square is a particular urban element which can take many forms and its geometrical relationships such as maximum dimensions, ratio of width to length and building height to length have been analysed for centuries (Alberti 1475), (Vitruvius 1550), (Sitte 1889), (Corbett 2004). Within the current urban design process there are increasing examples of three dimensional computer representations which allow the user to experience a visual sense of the geometry of city squares in an urban landscape. Computer-aided design and Virtual Reality technologies have recently contributed to this visual assessment, but there have been limited attempts at 3D computer representations which allow the user to experience a greater sense of the urban space. This paper will describe a survey of computer tools which could support a more holistic approach to urban design and which could be used to simulate a number of urban texture and urban quality aspects. It will provide a systematic overview of currently available software that could support the simulation of building density, height, colour and style as well as conditions relating to noise, shading, heat, natural and artificial light. It will describe a methodology for the selection and filtering of appropriate computer applications and offer an initial evaluation of these tools for the analysis and representation of the three-dimensional geometry, urban texture and urban quality of city centre spaces. The paper is structured to include an introduction to the design criteria relating to city centre spaces which underpins this research. Next the systematic review of computer software will be described, and selected tools will undergo initial evaluation. Finally conclusions will be drawn and areas for future research identified.
keywords	Urban design, Software identification, 3D modelling, Pedestrian modelling, Wind modelling, Noise mapping, Thermal comfort, VR Engine
series	DDSS
last changed	2008/09/01 17:06

_id	ecaade2008_039
id	ecaade2008_039
authors	Indraprastha, Aswin; Shinozaki, Michihiko
year	2008
title	Constructing Virtual Urban Environment Using Game Technology
doi	https://doi.org/10.52842/conf.ecaade.2008.359
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 359-366
summary	Recent game technology ascends development of low-cost virtual environment to the next level in two domains : reality representation and user interaction or engagement. In architecture and urban design realm, realistic 3D representation become more important in such way of conceptualizing ideas and analyzing the context of design problem. This research will present development of virtual urban environment using game engine technology. Aim of this research is to promote game engine as a tool for visual representation, visual analysis and further basic tool for urban design study. At the end, we point out potentials as well as constraints both in technical and design method issues in game technology based on the research findings.
keywords	Game engine: virtual urban environment, design study, visual representation, visual analysis
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaade2008_181
id	ecaade2008_181
authors	Koehler, Tanja; Dieckmann, Andreas; Russell , Peter
year	2008
title	An Evaluation of Contemporary Game Engines
doi	https://doi.org/10.52842/conf.ecaade.2008.743
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 743-750
summary	The paper deals with a close examination of several contemporary game engines regarding their usability for architectural visualisation that was conducted by third to fifth year students in a seminar context. The study examines the technology of these game engines with the main focus on graphic quality and adaptability to architectural purpose. The evaluation included not only the workflow of importing the 3D model into the engine but also general handling of the software and its user interface. The documentation of the test process and the evaluation of the various engines have been documented in a wiki compiled and written by the students. The information therein and the cost-benefit analyses provided for every engine should assist future users to quickly find the most suitable game engine for their specific purposes.
keywords	game engine, visualization, virtual reality, real-time graphic, 3d model
series	eCAADe
email
last changed	2022/06/07 07:51

_id	caadria2008_72_session7a_594
id	caadria2008_72_session7a_594
authors	Kosavinta, Satakhun
year	2008
title	Collaborative Financial Feasibility With CAAD For Residential Development
doi	https://doi.org/10.52842/conf.caadria.2008.594
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 594-600
summary	Computer Aided Architectural Design software is a necessary tool for the architectural design of a visible object or model. In residential development, an estimation of time/cost corresponding to the design is needed in order to complete its successful project. But available feasibility supporting tools usually lacks ability to share their information. To solve this limitation, this research proposes a design of Graphic User Interface (GUI) for collaborative financial feasibility through an architectural design process in housing project. The development of the GUI starts from collecting some information and requirement from National Housing Authority of Thailand. A heuristic decision making approach based on financial analysis are then designed for both design processes and feasibility processes of the project. Finally, design of the GUI is an integration of CAAD engines, design standards and financial feasibility analysis. Proposed GUI for collaborative financial feasibility is also tested and verified with some information from sample past projects of the National Housing Authority. From the experimental results, This GUI allows designers to improve the design of the project in real-time by inspecting the result of their design via the part of the architectural design-oriented GUI called myMonitoring and Scratch Pad. Together with planning, collaborative financial feasibility is focusing on the four main financial parameters which illustrated the possible chance of the project: Net Present Value (NPV), Benefit-Cost Ratio (B/C), Internal Rate of Return (IRR), and Payback Period. The core system was developed on Java Technology such as JSP and Swing empowered by 3D game engine. In addition, “Virtools” as an authoring tool was applied to improve interactive 3D virtual environment and explore rapid online system prototyping.
keywords	Collaborative: Financial Feasibility; CAAD; Residential Development; Virtual Reality (VR)
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	cf2011_p035
id	cf2011_p035
authors	Langenhan, Christoph; Weber Markus, Petzold Frank, Liwicki Marcus, Dengel Andreas
year	2011
title	Sketch-based Methods for Researching Building Layouts through the Semantic Fingerprint of Architecture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 85-102.
summary	The paper focuses on the early stages of the design process where the architect needs assistance in finding reference projects and describes different aspects of a concept for retrieving previous design solutions with similar layout characteristics. Such references are typically used to see how others have solved a similar architectural problem or simply for inspiration. Current electronic search methods use textual information rather than graphical information. The configuration of space and the relations between rooms are hard to represent using keywords, in fact transforming these spatial configurations into verbally expressed typologies tends to result in unclear and often imprecise descriptions of architecture. Nowadays, modern IT-technologies lead to fundamental changes during the process of designing buildings. Digital representations of architecture require suitable approaches to the storage, indexing and management of information as well as adequate retrieval methods. Traditionally planning information is represented in the form of floor plans, elevations, sections and textual descriptions. State of the art digital representations include renderings, computer aided design (CAD) and semantic information like Building Information Modelling (BIM) including 2D and 3D file formats such as Industry Foundation Classes (IFC) (IAI, 2010). In the paper, we examine the development of IT-technologies in the area of case-based reasoning (Richter et al., 2007) to provide a sketch-based submission and retrieval system for publishing and researching building layouts including their manipulation and subsequent use. The user interface focuses on specifying space and their relations by drawing them. This query style supports the spatial thinking approach that architects use, who often have a visual representation in mind without being able to provide an accurate description of the spatial configuration. The semantic fingerprint proposed by (Langenhan, 2008) is a description and query language for creating an index of floor plans to store meta-data about architecture, which can be used as signature for retrieving reference projects. The functional spaces, such as living room or kitchen and the relation among on another, are used to create a fingerprint. Furthermore, we propose a visual sketch-based interface (Weber et al., 2010) based on the Touch&Write paradigm (Liwicki et al., 2010) for the submission and the retrieval phase. During the submission process the architect is sketching the space-boundaries, space relations and functional coherence's. Using state of the art document analysis techniques, the architects are supported offering an automatic detection of room boundaries and their physical relations. During the retrieval the application will interpret the sketches of the architect and find reference projects based on a similarity based search utilizing the semantic fingerprint. By recommending reference projects, architects will be able to reuse collective experience which match the current requirements. The way of performing a search using a sketch as a query is a new way of thinking and working. The retrieval of 3D models based on a sketched shape are already realized in several domains. We already propose a step further, using the semantics of a spatial configuration. Observing the design process of buildings reveals that the initial design phase serves as the foundation for the quality of the later outcome. The sketch-based approach to access valuable information using the semantic fingerprint enables the user to digitally capture knowledge about architecture, to recover and reuse it in common-sense. Furthermore, automatically analysed fingerprints can put forward both commonly used as well as best practice projects. It will be possible to rate architecture according to the fingerprint of a building.
keywords	new media, case-based reasoning, ontology, semantic building design, sketch-based, knowledge management
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2008_077
id	sigradi2008_077
authors	Briones, Carolina
year	2008
title	A collaborative project experience in an architectural framework, working with Open Source applications and physical computing [Diseño de Plataformas Digitales e Interactivas: una experiencia educativa trabajando colaborativamente con aplicaciones de Código Abierto y Computación Física]
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	Nowadays, thanks to the telecommunication revolution and therefore the massive spread of Internet, we have seen the come up of international architectural offices with branches located in different continent, working in a collaborative fashion, surpassing physical and time frontiers. At the same time, the multidisciplinary work between designers, architects, engineers, programmers and even biologist, between others, have been taking place in the new network society. All transformations also supported by the arising of FOSS (Free Open Source Software) and the virtual communities behind them, which allow the creation of non-traditional or specific software, the association between disciplines, and also, the formation of meeting scenarios for a mixture of individuals coming up with multiple motivation to coexist in collaborative environment. Furthermore, it is possible to argue that Open Source applications are also the reflection of a social movement, based on the open creation and exchange of information and knowledge. Do the appeared of FOSS compel us to re-think our working and teaching methods? Do they allow new modes of organizing and collaborating inside our architectural practices?. This paper would like to address these questions, by presenting the results of the “Experience Design” course, which by implementing teaching methods based on Open Source principles and cutting-edge tools, seeks to approach students to these new “way of do”, knowledge and methodologies, and overall, focus them on the science behind the computer. This paper describes the “Experience Design” course, in which architectural graduate students of Universidad Diego Portales (Chile), put for first time their hands on the creation of interactive interfaces. By acquiring basic knowledge of programming and physical computing, students built in a collaborative way a responsive physical installation. The course use as applications “Processing” and “Arduino”. The first one is an Open Source programming language and environment for users who want to program images, animation, and interactions. It has a visual context and serve as a software sketchbook and professional production tool. Processing is a project initiated by Ben Fry and Casey Reas, at the MIT Media Lab (www.processing.org). The second is an Open Source electronics prototyping platform based on flexible, easy-to-use hardware and software. Arduino has a microcontroller (programmed with Processing language) which can sense the environment by receiving input from a variety of sensors and can affect its surroundings by controlling lights, motors, and other actuators (www.arduino.cc). Both environments shared a growing community of people working in related projects and extending useful assistance for beginners. In this paper it is presented the current state of the pilot course and some of the initials results collected during the process. Students and teacher’s debates and evaluations of the experience have been exposed. Together with a critical evaluation in relation to the accomplishment of the effort of place together different disciplines in one collaborative project akin, architecture, design, programming and electronic. Finally, futures modifications of the course are discussed, together with consideration to take in account at the moment of bring Open Source and programming culture into the student curriculum.
keywords	Physical computing, teaching framework, Open Source, Interactive Installation
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2008_087
id	sigradi2008_087
authors	Lautenschlaeger, Graziele; Anja Pratschke
year	2008
title	Electronic Art and Second Order Cybernetic: From Art in Process to Process in Art.
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	The goal of the paper presented below is to discuss partial results of a research which has been financed by the state sponsored agency FAPESP since 2007. Inserted in the research line Design Process, it aims to analyse connections between design process in electronic art and architecture, concerning the creation of mixed media spatialities, as well as present how each field can get the benefits from this analyses. Based on Grounded Theory methodology, a method of qualitative research which aims to understand “reality” from the meanings attributed by people for their experiences, the research has been started collecting data from bibliographical references, interviews with media artists, theoreticians and curators of electronic art and visits to media labs. Interviews and visits of media centers were taken in Europe while the researcher was as an exchange student in the Interface Culture Department in Kunstuniversität Linz, from March to September of 2008. By crossing data collected from the interviews and visits, with the cybernetic social system theory by Niklas Luhmann, and the discussion of an example of mixed media spatiality creation in the art field, this paper analyses how creative processes in digital era depends on different interdisciplinary relationships and how collaborative approaches are needed nowadays in the arts and architectural areas, seeing that artworks are always being influenced by their respective specific “mediality”. The aim of this paper is to discuss the relevance of the use of the cybernetic theory in digital culture, when concepts like participation, interaction and communication are some of the keywords, towards a “collective and distributed authorship”, and their reflects in the contemporary spatiality. The special interest in the comparison of art experience and second order cybernetics as a reference to architecture field is one of the findings of the paper. And, concerning the practical implication, due to cybernetics’ constant questioning of viability, adaptability and recursion, it should be able to point some ways to architects and artists´ works, especially if we consider that they never work in “ideal” conditions.
keywords	Electronic art. Design process. Second order Cybernetic. Niklas Luhmann.
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	ddss2008-08
id	ddss2008-08
authors	Koshak, Nabeel A.; Abdullah Fouda
year	2008
title	Analyzing Pedestrian Movement in Mataf Using GPSand GIS to Support Space Redesign
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Evaluating the use of architectural and urban spaces is an important issue for architects and urban designers who wish to enhance space usability. Space usability is crucial in crowded spaces such as Mataf areas. Millions of people come to the city of Makkah, Saudi Arabia every year to perform Hajj (Islamic Pilgrimage) and Umrah. A cornerstone of Hajj and Umrah spirituals is to perform Tawaf, which is the circumambulation of the Ka'bah in the center of the Holy Mosque in Makkah. The areas of performing Tawaf (called Mataf) become very crowded during Hajj and the last ten days of Ramadan. This paper demonstrates how we utilized Global Positioning Systems (GPS) and Geographic Information Systems (GIS) to analyze pedestrian movement while performing Tawaf. During the Hajj of 1424 H (2004 in the Georgian Calendar), several GPS devices were used to collect pedestrian movement coordinates at specific time intervals. Computer software for tracking analysis is used to visualize and analyze the pattern of pedestrian movement in Tawaf. The software allows users to view temporal data, which can be set up with past time windows for historical data analysis. The findings of this research show levels of service and flow rates throughout different zones and times of Mataf. They indicate the most critical zones and times for Tawaf during Hajj. They also visually demonstrate the track pattern of pedestrian movement at different locations in the Tawaf area. The paper concludes with some redesign recommendations to remove obstacles and facilitate pedestrian movement in Tawaf. The approach described in this paper can be implemented in architectural and urban design space modifications to improve pedestrian movement in open spaces.
keywords	Pedestrian movement analysis, GPS, GIS, Hajj, Makkah, Tawaf
series	DDSS
last changed	2008/09/01 17:06

_id	ecaade2008_084
id	ecaade2008_084
authors	Alaçam Aslan, Sema; Çagdas, Gülen
year	2008
title	An Interface Proposal for Collaborative Architectural Design Process
doi	https://doi.org/10.52842/conf.ecaade.2008.319
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 319-324
summary	The aim of this paper is to explore how new technological opportunities affect approaches of designers during collaborative architectural design process. Which factors affect the communication and the quality of interaction? The study is based on two phases: the data input by the designer via devices to the computer environment and the transformation of data into design product in the software by scripting addition. Input devices that are used are 3D mouse, graphic tablet as a tangible interface and implementation of second mouse besides a standard mouse and keyboard. The potential usage of these interfaces in collaborative architectural design process is discussed and proposals are developed in 3ds max scripting environment.
keywords	Collaborative design, human-computer interaction, user participation in design
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia08_464
id	acadia08_464
authors	Belcher, Daniel; Brian Johnson
year	2008
title	MxR: A Physical Model-Based Mixed Reality Interface for Design Collaboration, Simulation, Visualization and Form Generation
doi	https://doi.org/10.52842/conf.acadia.2008.464
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 464-471
summary	MxR—pronounced “mixer”—is a Mixed/Augmented Reality system intended to support collaboration during early phases of architectural design. MxR allows an interdisciplinary group of practitioners and stakeholders to gather around a table, discuss and test different hypotheses, visualize results, simulate different physical systems, and generate simple forms. MxR is also a test-bed for collaborative interactions and demonstrates different configuration potentials, from exploration of individual alternatives to group discussion around a physical model. As a MR-VR transitional interface, MxR allows for movement along the reality-virtuality continuum, while employing a simple tangible user-interface and a MagicLens interaction technique.
keywords	Augmented Reality; Collaboration; Interactive; Interface; Physical Modeling
series	ACADIA
last changed	2022/06/07 07:54

_id	ecaade2008_083
id	ecaade2008_083
authors	Belcher, Daniel; Johnson, Brian R.
year	2008
title	ARchitectureView
doi	https://doi.org/10.52842/conf.ecaade.2008.561
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 561-568
summary	We present a system for viewing architectural building models – specifically Building Information Modeling (BIM) models – in 3D using an Augmented Reality Tangible User Interface (TUI) and a Magic Lens interaction metaphor. ARchitectureView is meant to facilitate communication and collaboration around a shared model. We present the system overview and a number of use scenarios in which the interface would serve to improve communication across disciplines and varied technical backgrounds, while supporting a rich and coherent common understanding.
keywords	Augmented Reality, Building Information Modeling, Magic Lens, Tangible User Interface
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2018_1359
id	sigradi2018_1359
authors	Bertola Duarte, Rovenir; Ziger Dalgallo, Ayla; Consalter Diniz, Maria Luisa; Romão Magoga, Thais
year	2018
title	A window to the autism: the political role of the difference of an objectile in the homogeneous school
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 848-853
summary	This paper approaches the insertion of an objectile in the homogeneous space of a school, looking to bring flexibility and responsiveness to assist a user with Autism Spectrum Disorder (ASD). The research concerns with photosensitivity, a problem faced by almost 25% of the children with autism (Miller-Horn; Spence; Takeoka, 2011). The study is based on the theories for ASD environments that speak of ‘sensorial perception’ and ‘thinking with imagery’ (Mostafa, 2008), and the coexistence of Sensory Design Theory and Neuro-Typical Method (Pomana, 2015). The result consists of a gadget developed in MIT App Inventor tool and a curtain that interact responsively through an Arduino code, for a new connection between the user and his surroundings.
keywords	Objectile; Responsive Architecture; Architecture and autism; ASD; Inclusive school
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	acadia11_242
id	acadia11_242
authors	Braumann, Johannes; Brell-Cokcan, Sigrid
year	2011
title	Parametric Robot Control: Integrated CAD/CAM for Architectural Design
doi	https://doi.org/10.52842/conf.acadia.2011.242
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 242-251
summary	Robots are gaining popularity in architecture. Snøhetta has recently purchased their own industrial robot, becoming one of the first architectural offices to adopt robot technology. As more and more architects are exposed to robotic fabrication, the need for easy interoperability, integration into architectural design tools and general accessibility will increase. Architects are discovering that industrial robots are much more than kinematic machines for stacking bricks, welding or milling - they are highly multifunctional and can be used for a huge variety of tasks. However, industry standard software does not provide easy solutions for allowing direct robot control right from CAAD (Computer Aided Architectural Design) systems. In this paper we will discuss existing methods of programming industrial robots, published architectural results (Gramazio and Kohler 2008) and the design of a new user interface that allows intuitive control of parametric designs and customized robotic mass production, by integrating CAM (Computer Aided Manufacturing) functions into CAAD.
keywords	robot programming; parametric design; mass customization; grasshopper component design; fabrication; robot milling; digital architecture
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	caadria2010_031
id	caadria2010_031
authors	Burke, A.; B. Coorey, D. Hill and J. McDermott
year	2010
title	Urban micro-informatics: a test case for high-resolution urban modelling through aggregating public information sources
doi	https://doi.org/10.52842/conf.caadria.2010.327
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 327-336
summary	Our contention is that the city is a rich collection of urban micro-ecologies in continuous formation that include information types outside the traditional boundaries of urban design, city planning, and architecture and their native data fields. This paper discusses working with non-standard urban data types of a highly granular nature, and the analytical possibilities and technical issues associated with their aggregation, through a post professional masters level research studio project run in 2008. Opportunities for novel urban analysis arising from this process are discussed in the context of typical urban planning and analysis systems and locative media practices. This research bought to light specific technical and conceptual issues arising from the combination of processes including sources of data, data collection methods, data formatting, aggregating and visualisation. The range and nature of publicly available information and its value in an urban analysis context is also explored, linking collective information sites such as Pachube, to local environmental analysis and sensor webs. These are discussed in this paper, toward determining the possibilities for novel understandings of the city from a user centric, real-time urban perspective.
keywords	Urban; informatics; processing; ubicomp; visualisation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2008_123
id	ecaade2008_123
authors	Cenani, Sehnaz; Ça_da_, Gülen
year	2008
title	Agent-Based System for Modeling User Behavior in Shopping Malls
doi	https://doi.org/10.52842/conf.ecaade.2008.635
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 635-642
summary	Agent-based systems are being used as decision support systems for solving architectural design problems. Usually in design phase, user behavior is ignored by the designers. Therefore, after the construction, the users face difficulties in emergency situations and in daily usage. As a result, buildings become insufficient to respond to users’ needs and design goals of the building itself. Before construction, ability of testing the interactions between the building and its users is particularly important to solve the problems in early phases of the design. Hence, to design a building that functions better in certain situations and time loss decreases in the design process. For these reasons, the aim of this study is to develop a model to simulate users in shopping malls.
keywords	User behavior, decision support systems, agent-based systems, simulation, shopping malls
series	eCAADe
email
last changed	2022/06/07 07:55

_id	caadria2008_81_session7b_662
id	caadria2008_81_session7b_662
authors	Champion, Erik; Andrew Dekker, Petra Thomas
year	2008
title	Lazy Panorama Monopoly Table: Take Your City for a Spin
doi	https://doi.org/10.52842/conf.caadria.2008.662x.u7o
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 662-669
summary	While conventional information displays are still effective, a lack of integration between descriptive and contextual information means they cannot be used independently of additional external information. New digital systems such as Google Maps are increasing in popularity. Unfortunately these present some limitations in terms of understanding both route and survey information, and in particular navigation and orientation, such as intuitively understanding a plan view no matter which way one is facing, so visitors can quickly and intuitively learn how to get to specific buildings or to specific facilities. Digital systems may also alienate older and non computer literate users; and they display contextual information inside an interface which limits the possible range of interaction methods offered by physical interaction. Our solution was to create a 3D physical model that one could spin, which would in turn display digital panoramas that spun in rotational alignment with the physical city model. Further, the user could place category tokens in intersections of the city model, which would bring up digital panoramas on the screen and highlight facilities linked to the category chosen. Rotating the token would also rotate the digital panorama.
keywords	Urban visualization, panorama, tangible user interface, phidgets
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:50

_id	caadria2008_5_session1a_042
id	caadria2008_5_session1a_042
authors	Chen, Chiung-Hui
year	2008
title	The design of an interactive scenario-based agent simulator for supporting the early stages of urban design
doi	https://doi.org/10.52842/conf.caadria.2008.042
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 42-48
summary	Recently, urban planning has largely placed the user at street as the centre of infrastructural design, with significant implications for the perceived attractiveness of user environments. The urban designers faced with the task of designing such spaces, needs a tool that will allow different designs to be compared in terms of their attractiveness as well as their effectiveness. Therefore, this paper applies the selective attention theory and establishes a pedestrian behavior model that embeds the behavior-based rules and attributes of an agent. We call this simulation platform to be an agent-based street simulator (ABSS). Through experiments and verifications on cases of real-life urban streets, the system and its applications, and major findings are reported.
keywords	attention theory; street design; agent; behavior; pedestrian
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	4d32
id	4d32
authors	Christian Derix, Åsmund Gamlesæter, Pablo Miranda Carranza.
year	2008
title	3d Isovists and Spatial Sensations: two methods and a case study
source	EDRA 39th Annual Conference
summary	The development of the first Isovist in 3D, is the result of a collaboration between the Aedas CDR group and the New York based architecture office Davis Brody Bond, for the design of the Ground Zero Memorial Museum. The article introduces the design context that prompted the development of 3D Isovists, and discusses 2 basic methods and their variations developed as part of the research.
keywords	Isovist, spatial perception, user cognition, visibility graph analysis
series	other
type	normal paper
email
more	http://www.sfbtr8.uni-bremen.de/papers/SFB_TR%208%20Rep%20015-05_2008.pdf
last changed	2012/09/20 17:58

_id	69d2
id	69d2
authors	Derix, Christian
year	2008
title	Genetically Modified Space: Evolutionary Design in Practice
source	In David Littlefield (ed), ‘Space Craft: Advanced in Architectural Computing’, RIBA publications, March 2008
summary	Genetically Modified Spaces discusses three projects implementing three different evolutionary algorithms and types of selection processes, to evolve spatial configurations for buildings and masterplans. The level of participation by the user varies from observation to collaboration in directing the search of the design space.
keywords	evolutionary architecture, genetic algorithms, space planning, emergence
series	book
type	normal paper
email
more	http://www.ribabookshops.com/item/space-craft-developments-in-architectural-computing/63560/
last changed	2012/09/20 18:09

For more results click below: