Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 36

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2008_077
id	sigradi2008_077
authors	Briones, Carolina
year	2008
title	A collaborative project experience in an architectural framework, working with Open Source applications and physical computing [Diseño de Plataformas Digitales e Interactivas: una experiencia educativa trabajando colaborativamente con aplicaciones de Código Abierto y Computación Física]
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	Nowadays, thanks to the telecommunication revolution and therefore the massive spread of Internet, we have seen the come up of international architectural offices with branches located in different continent, working in a collaborative fashion, surpassing physical and time frontiers. At the same time, the multidisciplinary work between designers, architects, engineers, programmers and even biologist, between others, have been taking place in the new network society. All transformations also supported by the arising of FOSS (Free Open Source Software) and the virtual communities behind them, which allow the creation of non-traditional or specific software, the association between disciplines, and also, the formation of meeting scenarios for a mixture of individuals coming up with multiple motivation to coexist in collaborative environment. Furthermore, it is possible to argue that Open Source applications are also the reflection of a social movement, based on the open creation and exchange of information and knowledge. Do the appeared of FOSS compel us to re-think our working and teaching methods? Do they allow new modes of organizing and collaborating inside our architectural practices?. This paper would like to address these questions, by presenting the results of the “Experience Design” course, which by implementing teaching methods based on Open Source principles and cutting-edge tools, seeks to approach students to these new “way of do”, knowledge and methodologies, and overall, focus them on the science behind the computer. This paper describes the “Experience Design” course, in which architectural graduate students of Universidad Diego Portales (Chile), put for first time their hands on the creation of interactive interfaces. By acquiring basic knowledge of programming and physical computing, students built in a collaborative way a responsive physical installation. The course use as applications “Processing” and “Arduino”. The first one is an Open Source programming language and environment for users who want to program images, animation, and interactions. It has a visual context and serve as a software sketchbook and professional production tool. Processing is a project initiated by Ben Fry and Casey Reas, at the MIT Media Lab (www.processing.org). The second is an Open Source electronics prototyping platform based on flexible, easy-to-use hardware and software. Arduino has a microcontroller (programmed with Processing language) which can sense the environment by receiving input from a variety of sensors and can affect its surroundings by controlling lights, motors, and other actuators (www.arduino.cc). Both environments shared a growing community of people working in related projects and extending useful assistance for beginners. In this paper it is presented the current state of the pilot course and some of the initials results collected during the process. Students and teacher’s debates and evaluations of the experience have been exposed. Together with a critical evaluation in relation to the accomplishment of the effort of place together different disciplines in one collaborative project akin, architecture, design, programming and electronic. Finally, futures modifications of the course are discussed, together with consideration to take in account at the moment of bring Open Source and programming culture into the student curriculum.
keywords	Physical computing, teaching framework, Open Source, Interactive Installation
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cdc2008_229
id	cdc2008_229
authors	Asut, Serdar
year	2008
title	Rethinking the Creative Architectural Design in the Digital Culture
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 229-234
summary	This paper tries to examine the effects of emerging digital tools in architectural design. Digital tools are not only practical instruments used for drawing, but they also affect design thinking. As the ones that are used in architectural design are mostly commercial, one can say that design thinking, the identity of the design and the creativity of the designer are defined by the companies which develop these tools. Therefore architects have to be able to manipulate these tools and personalize them in order to free their design thinking and creativity. This paper addresses the open source development in order to redefine creativity in architecture of digital culture.
keywords	Design Tools, Digital Culture, CAD Software, Open Source
email
last changed	2009/01/07 08:05

_id	ecaade2008_103
id	ecaade2008_103
authors	Chase, Scott; Schultz, Ryan; Brouchoud, Jon
year	2008
title	Gather ’round the Wiki-Tree
doi	https://doi.org/10.52842/conf.ecaade.2008.809
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 809-816
summary	The growth of internet based communication has facilitated the development of open source, collaborative projects. Here we describe the results of three ‘Wikitecture’ experiments in collaborative, open source architectural design within the virtual world Second Life. We describe the in-world platform developed and its use for a design competition entry. Issues such as contribution assessment and the role of open source collaborative design in architecture and construction are discussed, concluding with a wish list for future enhancements.
keywords	Virtual worlds, wikis, open source architecture, collaborative design
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2008_183
id	ecaade2008_183
authors	Fricker, Pia; Wartmann, Christoph; Hovestadt, Ludger
year	2008
title	Processing: Programming Instead of Drawing
doi	https://doi.org/10.52842/conf.ecaade.2008.525
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 525-530
summary	The following paper essentially focuses on the innovative use of an open-source programming language, called ‘Processing’, in the architecture curriculum and the development of a line of teaching beginning with Processing and ending with object-oriented programming in Java. This represents one creative possibility through which students are able to overcome the typically difficult step of learning a programming language and simultaneously learn how to apply it as a design tool.
keywords	CAAD curriculum, CAAD research, User Participation in Design, Programming instead of Drawing
series	eCAADe
email
last changed	2022/06/07 07:50

_id	236c
id	236c
authors	Hamuy Pinto, Eduardo; Galaz Lorca, Mirtha
year	2008
title	Evaluación de Participación e Interacción en LMS MOODLE [Assessment of Participation and Interaction in LMS MOODLE]
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008, pp. 164-167.
summary	Learning Management Systems (LMS) embody spaces that combine Virtual Classrooms, learning communities, repositories of educational resources and communication devices. The use by faculty members and students, in a campus containing the schools of Architecture, Design and Geography, of Open Source LMS MOODLE, during the years 2005-2006, was assessed. An analysis of the Digital Vestiges, the metadata in the logs database, distinguished between the levels of informative and communicational interaction. The results draw attention to a trend, similar to previous measurements in Latin America, of more use of ICT educational resources for informational purposes than communicational interactions between teachers and students.
keywords	LMS, MOODLE, Meaningful Interactions
series	SIGRADI
type	normal paper
email
last changed	2016/03/10 09:53

_id	ecaade2008_053
id	ecaade2008_053
authors	Berit Lang, Silke
year	2008
title	Is it About Time to Investigate a Transdisciplinary Understanding of Design?
doi	https://doi.org/10.52842/conf.ecaade.2008.283
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 283-292
summary	This paper claims that now the time is right to investigate a transdisciplinary understanding of design. Nowadays, design is excellent in many disciplines and specialized fields but not connected and coordinated to other fields. The benefit of a transdiciplinary understanding of design will open up new ways in teaching, research and business. The current activities in this field at leading schools worldwide evidence that the time has come to gain a fundamental understanding of design. In this paper we describe the phenomena that design as a research topic currently gains in importance. We then discuss why there is no unified definition of design. We explain our approach towards a transdiciplinary understanding of design and show how this differs from other initiatives.
keywords	Design Science, Design, Modeling, Verification, Knowledge Visualization
series	eCAADe
email
last changed	2022/06/07 07:52

_id	cdc2008_129
id	cdc2008_129
authors	Breen, Jack and Julian Breen
year	2008
title	The Medium Is the Matter: Critical Observations and Strategic Perspectives at Half-time
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 129-136
summary	This paper critically re-views the professional impact and functionality of the pervasive digital ‘matter’ we have come to believe we can no longer do without. On the basis of a playful exploration of the first ‘half-century’ of our digital age, an attempt is made to draw new perspectives for the next ’level’ of our digital culture in a broader (multi)media perspective and more specifically: the domains of Architecture. To stimulate an open-minded ‘second-half’ debate, the paper puts forward some potentially promising (and hopefully provocative) conceptions and strategies for imaginative interface applications and game-based architectural study initiatives. Furthermore, the paper proposes the establishment of a new cultural platform for the exchange of Critical Digital hypotheses and the evolvement of visionary design concepts through creative digital innovation, with the (inter)active involvement of older and younger team-players…
email
last changed	2009/01/07 08:05

_id	ijac20076106
id	ijac20076106
authors	Donath, Dirk; Bohme, Luis Felipe Gonzalez
year	2008
title	Constraint-Based Design in Participatory Housing Planning
source	International Journal of Architectural Computing vol. 6 - no. 1, pp. 97-117
summary	We introduce some novel ideas for a constraint-based design strategy to support participatory housing planning processes in Latin America. The following lines intend to open the discussion on the requirements and effect of the computer implementation of a constraint satisfaction approach to solve elementary design problems in architectural practice. The case study applies to the building massing design problem posed by the Chilean urban regulatory framework that addresses single-family affordable houses. Two different implementation criteria are being tested in an ongoing series of trials providing further considerations. One prototype uses MAXON's CINEMA4D XPRESSO® visual scripting environment to set up a semi-automated design environment which allows users to edit one feature-based 3D model of massing alternative at a time. The other prototype uses ILOG's OPL STUDIO® constraint programming environment to achieve fully automated search and 2D visualization of all possible solution alternatives to separate subdomains of the building massing design problem.
series	journal
last changed	2008/06/18 08:12

_id	ecaade2008_086
id	ecaade2008_086
authors	Elsen, Catherine; Juchmes, Roland; Kubicki, Sylvain; Leclercq, Pierre
year	2008
title	DCDS – Distant Collaborative Design Studio
doi	https://doi.org/10.52842/conf.ecaade.2008.325
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 325-332
summary	This paper introduces new supporting tools in the field of distant collaborative design, namely DCDS and CRTI-weB. These prototypes respectively support: the early stages of design, through the support of the crucial initial step of free-hand sketches shared in real-time, and the asynchronous collaborative activities. The main goal of this paper is to propose the use of these innovative tools as an efficient and realistic way of managing long distance collaboration, to effectively serve the designers’ needs. This proposition is analyzed and addressed through a real-size experiment featuring 30 architecture and architectural-engineering students, working together in real-time at different locations (Belgium and France). This experiment and the necessary survey open up interesting fields of investigation, such as the relevance of the proposed services in supporting distant collaborative design in architecture and the benefit this represents for students to merge the IT aspects and the design studio. The methodology and the replicability are analyzed to increase the level and quality of formation of our students and, finally, a criticism of the tools confirms a benefit for the developing teams.
keywords	Distant collaborative design, sketch support systems, asynchronous collaborative activities
series	eCAADe
email
last changed	2022/06/07 07:55

_id	46d4
id	46d4
authors	Fischer, Thomas
year	2008
title	Designing (tools (for designing (tools for ...))))
source	RMIT University, Melbourne
summary	Outcomes of innovative designing are frequently described as enabling us in achieving more desirable futures. How can we design and innovate so as to enable future processes of design and innovation? To investigate this question, this thesis probes the conditions, possibilities and limitations of toolmaking for novelty and knowledge generation, or in other words, it examines designing for designing. The focus of this thesis is on the development of digital design tools that support the reconciliation of conflicting criteria centred on architectural geometry. Of particular interest are the roles of methodological approaches and of biological analogies as guides in toolmaking for design, as well as the possibility of generalising design tools beyond the contexts from which they originate. The presented investigation consists of an applied toolmaking study and a subsequent reflective analysis using second- order cybernetics as a theoretical framework. Observations made during the toolmaking study suggest that biological analogies can, in informal ways, inspire designing, including the designing of design tools. Design tools seem to enable the generation of novelty and knowledge beyond the contexts in and for which they are developed only if their users apply them in ways unanticipated by the toolmaker. Abstract The reflective analysis offers theoretical explanations for these observations based on aspects of second-order cybernetics. These aspects include the modelling of designing as a conversation, different relationships between observers (such as designers) and systems (such as designers engaged in their projects), the distinction between coded and uncoded knowledge, as well as processes underlying the production and the restriction of meaning. Initially aimed at the development of generally applicable, prescriptive digital tools for designing, the presented work results in a personal descriptive model of novelty and knowledge generation in science and design. This shift indicates a perspective change from a positivist to a relativist outlook on designing, which was accomplished over the course of the study. Investigating theory and practice of designing and of science, this study establishes an epistemological model of designing that accommodates and extends a number of theoretical concepts others have previously proposed. According to this model, both design and science generate and encode new knowledge through conversational processes, in which open-minded perception appears to be of greater innovative power than efforts to exercise control. The presented work substantiates and exemplifies radical constructivist theory of knowledge and novelty production, establishes correspondences between systems theory and design research theory and implies that mainstream scientific theories and practices are insufficient to account for and to guide innovation.
keywords	Digital design tools, geometry rationalisation, second-order cybernetics, knowledge generation
series	thesis:PhD
type	normal paper
email
more	http://adt.lib.rmit.edu.au/adt/public/adt-VIT20080424.160537/index.html
last changed	2008/05/10 08:31

_id	ddss2008-06
id	ddss2008-06
authors	Hagen-Zanker, Alex
year	2008
title	Sensititivity analysis of a cellular automata land usemodel through multiple metrics of goodness-of-fit
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	The complexity and self-organizing behaviour of Cellular Automata models makes them attractive instruments for investigating urban change processes. That same complexity, however, obscures the relation between model parameters and model results and poses problems for the calibration of the models as well as the interpretation of results. This paper introduces an approach to sensitivity analysis that untangles much of the complex relation between parameters and outputs. The key of the approach is to find compartments in parameter space on the basis of the relation between multiple metrics of goodness-of-fit. Within individual compartments the relation between parameters and model outputs is less chaotic and open for investigation by more traditional means. The method offers prospects for model calibration and parameter reduction; further steps in these directions are outlined and discussed.
keywords	Cellular automata, land use, sensitivity, goodness-of-fit, map comparison
series	DDSS
last changed	2008/09/01 17:06

_id	acadia08_088
id	acadia08_088
authors	Hynes, Hugh
year	2008
title	When The Going Gets Tough, The Pluripotent Get Going: Resilient Developmental Models
doi	https://doi.org/10.52842/conf.acadia.2008.088
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 88-93
summary	Mechanisms of biological development, such as in embryogenesis, offer promising models for resilient architectural systems well-suited to volatile or unpredictable contextual conditions. The resilience of embryonic development as a process is such that successful development—“success” defined here as that which results in the birth of an organism that can survive—can sustain extreme shifts in a normal developmental process, triggered by mutations, environmental pressures, injury, or experimental intervention. More specifically, biological development combines mechanisms of standardization with mechanisms of customization to create open-ended or what biologists call pluripotent systems—poised (“-potent”) to develop into a wide range (“pluri-”) of potential forms—which we can endeavor to reproduce mimetically. ¶ This paper considers biomimesis less a matter of replicating these developmental mechanisms physically or formally, but rather borrowing aspects of the mechanisms’ operation in order to test project outcomes digitally. The discipline of developmental biology affords a virtually ready-made conceptual framework and terminology to guide an open-ended digital methodology, in the hope of incorporating increasing degrees of resilience into the resulting design work. Searching for a capacity to sustain a similar fluidity of differentiation afforded by organisms in early development, we explore a pluripotent architecture for which differentiation might occur over time, and which might be better able to absorb volatility.
keywords	Adaptation; Differentiation; Morphogenesis; Resilience; Scenario
series	ACADIA
last changed	2022/06/07 07:50

_id	acadia08_174
id	acadia08_174
authors	Jaskiewicz, Tomasz
year	2008
title	‘iPortals’ as a Case Study Pre-Prototype of an Evolving Network of Interactive Spatial Components
doi	https://doi.org/10.52842/conf.acadia.2008.174
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 174-181
summary	The art and craft of design and creation of buildings is undergoing a radical paradigm shift. This shift is being driven by diverse novel cross-disciplinary technical possibilities, as well as by ongoing cultural transformations. They all, directly or indirectly, originate from omnipresent advancements in information technologies. Instant and ubiquitous availability of information and immediate access to computing power pervasively penetrating our lives is profoundly transforming our culture. This phenomenon has enormous implications for architecture in a multitude of ways1. ¶ Firstly, the speed of changes that occur in modern-day culture and society makes it inconvenient or even entirely impossible to design buildings with fixed and permanent functionalities. As lifestyle patterns, production methods and environmental conditions, to name a few factors only, may now dramatically change from one day to another, architecture has to become flexible. It has to allow dynamic, active, or even pro-active adaptation and customization of spaces on many levels of its functionality2. ¶ Secondly, these profound cultural changes are not only of technical relevance. In its process-driven character, information technology strongly mandates the already widely recognized ontology of becoming, proclaimed by the prominent minds of contemporary philosophy and science. This process-oriented worldview, supported by latest technological possibilities3, has caused a radical change in the common sense of the manner in which architecture has to be understood and dealt with4. As an effect, it requires an in-depth reconsideration of the nature of processes of both creation and participation in spatial environments.
keywords	Environment; Interactive; Open Systems; Prototype; Skin
series	ACADIA
last changed	2022/06/07 07:52

_id	caadria2008_17_session2a_143
id	caadria2008_17_session2a_143
authors	Kaewlai, Pornpis; Pinyo Jinuntuya, Pizzanu Kanongchaiyos
year	2008
title	Interactive Feasibility-based CAAD System for Infrastructure and Open Space Planning in Housing Project Design
doi	https://doi.org/10.52842/conf.caadria.2008.143
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 143-148
summary	The decision support system developed in this research is aimed to the conceptual scheme of project focusing on infrastructure planning and open space design in the architectural context for housing project. Alternative design sets are provided within the limitations, and possibilities to be further evaluated appropriately. This system helps architects and developers to analyze relationships of physical environment, architectural requirements and the overall of project-related factors with real-time cost estimation. Factors for cost estimation derived from the beginning to the end of project will be manipulated simultaneously. Architects and developers can use this design simulation to address the physical data with real-time cost estimation, provide alternative results, and design evaluation for overall project’s feasibility. The software of our research is not just a tool for design & planning automation in feasibility analysis. It will be an interactive decision support system for both developers and planners aspects. The system was developed by SketchUp Ruby Application Programming Interface. The results will be presented into two ways. Firstly, 2D and 3D modeling will be used for interactive visualization in design and planning of the beginning process. Subsequently, numbers and additional factors in details will be used to show relationship between architectural environment and feasibility-based information to help architects and developers collaboratively analyze the land use planning and open space design for housing project. In evaluation process, the developed software is tested with the project preceding and the future project of Bangkok area under constraints and regulations of Building Control Act of Thailand. In conclusion, this system will make effectiveness in design process and management of the construction knowledge. The decision support systems should be designed to makes explicit use of both planning analysis aspect and knowledge-based decision making.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2008_178
id	ecaade2008_178
authors	Kolarevic, Branko
year	2008
title	Architecture in the Post-Digital Age: Towards Integrative Design
doi	https://doi.org/10.52842/conf.ecaade.2008.653
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 653-658
summary	For many, integration within the building industry is an inevitable outcome as architecture, engineering, and construction enter a ‘post-digital’ age. This paper argues that the challenge is to avoid closed systems of integration and to keep integrative tendencies as open as possible, conceptually and operationally. An alternative vision of integrated design is proposed that is more open, fluid, pliable, and opportunistic in its search of collaborative alliances and agendas. This alternative approach is referred to as integrative design, in which methods, processes, and techniques are discovered, appropriated, adapted, and altered from ‘elsewhere’, and often ‘digitally’ pursued.
keywords	Integrated design, integrative design
series	eCAADe
email
last changed	2022/06/07 07:51

_id	cdc2008_149
id	cdc2008_149
authors	Kolarevic, Branko
year	2008
title	Post-Digital Architecture: Towards Integrative Design
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 149-156
summary	In this paper, an alternative vision of integrated design is proposed that is more open, fluid, pliable, and opportunistic in its search of collaborative alliances and agendas. This alternative approach is referred to as integrative design, in which methods, processes, and techniques are discovered, appropriated, adapted, and altered from “elsewhere,” and often “digitally” pursued. The designers who engage design as a broadly integrative endeavor fluidly navigate across different disciplinary territories, and deploy algorithmic thinking, biomimicry, computation, digital fabrication, material exploration, and/or performance analyses to discover and create a process, technique, or a product that is qualitatively new.
last changed	2009/01/07 08:05

_id	ddss2008-08
id	ddss2008-08
authors	Koshak, Nabeel A.; Abdullah Fouda
year	2008
title	Analyzing Pedestrian Movement in Mataf Using GPSand GIS to Support Space Redesign
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Evaluating the use of architectural and urban spaces is an important issue for architects and urban designers who wish to enhance space usability. Space usability is crucial in crowded spaces such as Mataf areas. Millions of people come to the city of Makkah, Saudi Arabia every year to perform Hajj (Islamic Pilgrimage) and Umrah. A cornerstone of Hajj and Umrah spirituals is to perform Tawaf, which is the circumambulation of the Ka'bah in the center of the Holy Mosque in Makkah. The areas of performing Tawaf (called Mataf) become very crowded during Hajj and the last ten days of Ramadan. This paper demonstrates how we utilized Global Positioning Systems (GPS) and Geographic Information Systems (GIS) to analyze pedestrian movement while performing Tawaf. During the Hajj of 1424 H (2004 in the Georgian Calendar), several GPS devices were used to collect pedestrian movement coordinates at specific time intervals. Computer software for tracking analysis is used to visualize and analyze the pattern of pedestrian movement in Tawaf. The software allows users to view temporal data, which can be set up with past time windows for historical data analysis. The findings of this research show levels of service and flow rates throughout different zones and times of Mataf. They indicate the most critical zones and times for Tawaf during Hajj. They also visually demonstrate the track pattern of pedestrian movement at different locations in the Tawaf area. The paper concludes with some redesign recommendations to remove obstacles and facilitate pedestrian movement in Tawaf. The approach described in this paper can be implemented in architectural and urban design space modifications to improve pedestrian movement in open spaces.
keywords	Pedestrian movement analysis, GPS, GIS, Hajj, Makkah, Tawaf
series	DDSS
last changed	2008/09/01 17:06

_id	caadria2008_40_session4b_328
id	caadria2008_40_session4b_328
authors	Lin, Chieh-Jen; Mao-Lin Chiu
year	2008
title	Open Ontology: A Self-Organizing Tool for Knowledge Acquisition in a Case Library
doi	https://doi.org/10.52842/conf.caadria.2008.328
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 328-334
summary	This paper is aimed to establish a sufficiently formalized, expandable metadata authoring tool of a case library based on ontology methodologies of AI. This tool cannot only self-organize facts of cases’ features, but can also guide users to arrange those facts into a formalized structure to facilitate design reasoning. Then knowledge experts, such as design instructors or project managers, can apply this tool to author and organize metadata of cases’ features in order to build knowledge templates for special situations. Beginners, such as students or assistants, can apply those templates to indicate and analyze facts of collected cases’ features and acquire essential knowledge in solving problems. Finally, through easily recognized semantic relations of metadata, facts of cases’ features can be self-organized, and the system can apply data mining techniques to detect and discover hidden knowledge patterns among facts of cases’ features.
keywords	Case Library; Design Knowledge; Knowledge Representation; Semantic Ontology; and Data Mining
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ecaade2008_000
id	ecaade2008_000
authors	Muylle, Marc (ed.)
year	2008
title	ARCHITECTURE ‘in computro’ - Integrating methods and techniques
doi	https://doi.org/10.52842/conf.ecaade.2008
source	26th eCAADe Conference Proceedings [ISBN 978-0-9541183-7-2], Antwerp (Belgium) 26-29 September 2008, 968 p.
summary	The presence of both visible and hidden digital resources in daily life is overwhelming and their presence continues to grow exponentially. It is surprising how little the impact of this evolution is questioned, especially in education. Reflecting on past experiences of this subject to learn for the future seems rarely to be done, and the sheer fact that a digital method exists is often seen as sufficient justification for its use. Are these the perceptions of serious misgivings or isolated views that circulate in the educational world and beyond? We would suggest that the eCAADe (Education and Research in Computer Aided Architectural Design in Europe) and its conferences provide the ideal forum to provide answers in this debate. For the first conference in what is to be the next quarter century of the existence of eCAADe, a theme was chosen that could easily include all aspects of this debate: ARCHITECTURE ‘in computro’ , Integrating methods and techniques It seems a bit vulgar to use a dog-Latin phrase ‘in computro’ for such a serious matter but at least it now has a place between ‘in vivo’ and ‘in vitro’. For more than 25 years CAAD has been available, and has been more and more successfully used in research and commercial architectural practice. In education, which by definition should prepare students for the future, the constantly evolving CAAD metaphor is provoking a challenge to cope with the ever expanding scope of related topics. It is not surprising that this has led to differing opinions as to how CAAD should be taught. Questions such as how advanced research results can be incorporated in teaching, or if the Internet is provoking self-education by students, are in striking contrast with the more fundamental issues such as the discussion on analogue versus digital design methods. Is CAAD a part of design teaching or is it its logical successor in a global E-topia? Although the E of education is a prominent factor in the ‘raison d’être’ of the organisation, the papers presented at this conference illustrate that eCAADe is open to all other relevant contributions in the area of computer-aided architectural design. It will be a fortunate coincidence that this exchange of knowledge and opinions on such state-of-the-art subjects, will be hosted by the The Higher Institute of Architectural Sciences, Henry van de Velde, located in the historical buildings of the Royal Academy of Fine Art established since the founding of the academy in 1662.
series	eCAADe
type	normal paper
email
more	http://www.ecaade.org
last changed	2022/06/07 07:49

_id	ddss2008-35
id	ddss2008-35
authors	Neema, M.N. and A. Ohgai
year	2008
title	A GA-based Multi-Objective Optimization Model for Location Planning of Urban Parks and Open Spaces A Case Study on Dhaka City
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	In this paper, we present a new multi-objective location model for urban parks and open spaces (POSs) planning. We developed a Genetic Algorithm (GA) based multi-objective optimization model (GAMOOM) to derive optimum locations of POSs by considering four incommensurable objectives with the provision of POSs near: 1) densely populated areas, 2) air polluted areas, 3) noisy areas, and 4) areas without open spaces. The success of the model is presented through its application as a case study on Dhaka City. Obtained results indicate that the model can successfully provide optimum location of required POSs. The findings from this study also signify that optimum location of POSs obtained by utilizing only the second objective is substantially different than that of others. Moreover, there is also difference in optimum location of POSs by taking into account only the third objective when compared with others. Therefore, considering single objective cannot give optimum results for good POSs planning. So, it is verified that POSs should be planned by optimizing multiple objectives instead of single objective. The outcome of this multi-objective GAMOOM model does have an implication on how POSs should be designed and managed by the planning authority for not only sustainable environment but also better quality of life in a city.
keywords	Genetic Algorithm (GA), Multi-Objective Optimization, Parks and Open Space (POS)
series	DDSS
last changed	2008/09/01 17:06

For more results click below: