Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 491

Reformat results as: short short into frame detailed detailed into frame

_id	ddss2004_ra-33
id	ddss2004_ra-33
authors	Diappi, L., P. Bolchim, and M. Buscema
year	2004
title	Improved Understanding of Urban Sprawl Using Neural Networks
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 14020-2408-8, p. 33-49
summary	It is widely accepted that the spatial pattern of settlements is a crucial factor affecting quality of life and environmental sustainability, but few recent studies have attempted to examine the phenomenon of sprawl by modelling the process rather than adopting a descriptive approach. The issue was partly addressed by models of land use and transportation which were mainly developed in the UK and US in the 1970s and 1980s, but the major advances were made in the area of modelling transportation, while very little was achieved in the area of spatial and temporal land use. Models of land use and transportation are well-established tools, based on explicit, exogenouslyformulated rules within a theoretical framework. The new approaches of artificial intelligence, and in particular, systems involving parallel processing, (Neural Networks, Cellular Automata and Multi-Agent Systems) defined by the expression “Neurocomputing”, allow problems to be approached in the reverse, bottom-up, direction by discovering rules, relationships and scenarios from a database. In this article we examine the hypothesis that territorial micro-transformations occur according to a local logic, i.e. according to use, accessibility, the presence of services and conditions of centrality, periphericity or isolation of each territorial “cell” relative to its surroundings. The prediction capabilities of different architectures of supervised Neural networks are implemented to the south Metropolitan area of Milan at two different temporal thresholds and discussed. Starting from data on land use in 1980 and 1994 and by subdividing the area into square cells on an orthogonal grid, the model produces a spatial and functional map of urbanisation in 2008. An implementation of the SOM (Self Organizing Map) processing to the Data Base allows the typologies of transformation to be identified, i.e. the classes of area which are transformed in the same way and which give rise to territorial morphologies; this is an interesting by-product of the approach.
keywords	Neural Networks, Self-Organizing Maps, Land-Use Dynamics, Supervised Networks
series	DDSS
last changed	2004/07/03 22:13

_id	cf2011_p035
id	cf2011_p035
authors	Langenhan, Christoph; Weber Markus, Petzold Frank, Liwicki Marcus, Dengel Andreas
year	2011
title	Sketch-based Methods for Researching Building Layouts through the Semantic Fingerprint of Architecture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 85-102.
summary	The paper focuses on the early stages of the design process where the architect needs assistance in finding reference projects and describes different aspects of a concept for retrieving previous design solutions with similar layout characteristics. Such references are typically used to see how others have solved a similar architectural problem or simply for inspiration. Current electronic search methods use textual information rather than graphical information. The configuration of space and the relations between rooms are hard to represent using keywords, in fact transforming these spatial configurations into verbally expressed typologies tends to result in unclear and often imprecise descriptions of architecture. Nowadays, modern IT-technologies lead to fundamental changes during the process of designing buildings. Digital representations of architecture require suitable approaches to the storage, indexing and management of information as well as adequate retrieval methods. Traditionally planning information is represented in the form of floor plans, elevations, sections and textual descriptions. State of the art digital representations include renderings, computer aided design (CAD) and semantic information like Building Information Modelling (BIM) including 2D and 3D file formats such as Industry Foundation Classes (IFC) (IAI, 2010). In the paper, we examine the development of IT-technologies in the area of case-based reasoning (Richter et al., 2007) to provide a sketch-based submission and retrieval system for publishing and researching building layouts including their manipulation and subsequent use. The user interface focuses on specifying space and their relations by drawing them. This query style supports the spatial thinking approach that architects use, who often have a visual representation in mind without being able to provide an accurate description of the spatial configuration. The semantic fingerprint proposed by (Langenhan, 2008) is a description and query language for creating an index of floor plans to store meta-data about architecture, which can be used as signature for retrieving reference projects. The functional spaces, such as living room or kitchen and the relation among on another, are used to create a fingerprint. Furthermore, we propose a visual sketch-based interface (Weber et al., 2010) based on the Touch&Write paradigm (Liwicki et al., 2010) for the submission and the retrieval phase. During the submission process the architect is sketching the space-boundaries, space relations and functional coherence's. Using state of the art document analysis techniques, the architects are supported offering an automatic detection of room boundaries and their physical relations. During the retrieval the application will interpret the sketches of the architect and find reference projects based on a similarity based search utilizing the semantic fingerprint. By recommending reference projects, architects will be able to reuse collective experience which match the current requirements. The way of performing a search using a sketch as a query is a new way of thinking and working. The retrieval of 3D models based on a sketched shape are already realized in several domains. We already propose a step further, using the semantics of a spatial configuration. Observing the design process of buildings reveals that the initial design phase serves as the foundation for the quality of the later outcome. The sketch-based approach to access valuable information using the semantic fingerprint enables the user to digitally capture knowledge about architecture, to recover and reuse it in common-sense. Furthermore, automatically analysed fingerprints can put forward both commonly used as well as best practice projects. It will be possible to rate architecture according to the fingerprint of a building.
keywords	new media, case-based reasoning, ontology, semantic building design, sketch-based, knowledge management
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadia08_208
id	acadia08_208
authors	Griffiths, Jason
year	2008
title	Man + Water + Fan = Freshman: Natural Process of Evaporative Cooling and the Digital Fabrication of the ASU Outdoor Dining Pavilion
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 208-213
doi	https://doi.org/10.52842/conf.acadia.2008.208
summary	To the east of Johnson City TX is the Lyndon B. Johnson’s family home. Part of the Johnson Estate2 is given over to a working farm circa 1870 that presents various aspects of domestic practice from the era. This includes a desert fridge which is a simple four-legged structure with a slightly battered profile that’s draped in calico. Its principle is simple; water from an upturned jar is drawn by osmosis down the sides of the calico where it evaporates in wind currents drawn though a “dog run” between two log cabins. Cooled air circulates within the structure and where cheese and milk are kept fresh during the summer. The desert fridge is a simple system that reaches a state of equilibrium through the natural process of evaporation. ¶ This system provides a working model for a prototype structure for an outdoor dining pavilion that was designed and constructed on the campus of Arizona State University. The desert fridge is the basis for a “biological process”3 of evaporative cooling that has been interpreted in terms a ritual of outdoor dining in arid climates. The pavilion is intended as a gathering point and a place of interaction for ASU freshmen. The long-term aim of this project is to provide a multiple of these pavilions across the campus that will be the locus of a sequence of dining events over a “dining season”4 during the fall and spring semester. ; This paper describes how the desert fridge principle has been interpreted in the program and construction of the dining pavilion. It explores a sequence of levels by which the structure, via digital production process, provides an educational narrative on sustainability. This communicative quality is portrayed by the building in direct biological terms, through tacit knowledge, perceived phenomena, lexical and mechanical systems. The paper also describes how these digital production process were used in the building’s design and fabrication. These range from an empirical prognosis of evaporative cooling effects, fluid dynamics, heat mapping and solar radiation analysis through to sheet steel laser cutting, folded plate construction and fully associative variable models of standard steel construction. The aim of the pavilion is to create an environment that presents the evaporative cooling message at a multiple of levels that will concentrate the visitor in holistic understanding of the processes imbued within the building.5
keywords	Communication; Digital Fabrication; Environment; System
series	ACADIA
last changed	2022/06/07 07:51

_id	ecaade2008_142
id	ecaade2008_142
authors	Hoog, Jochen; Wolff-Plottegg, Manfred
year	2008
title	Real Virtualities - Architecture 2.0
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 817-822
doi	https://doi.org/10.52842/conf.ecaade.2008.817
summary	The Institute of Architecture and Design, TU Vienna has bought a virtual island in Second Life (SL) in order to use it in a design course (5 ECTS). The goal was to introduce students to new ways in which computers in a web based network like SL can be used to generate designs by using end user scripting within a virtual 3D environment. After a short introduction into the basics of SL and to the rules and conditions of multi-user virtual environments (MUVE’s) the students worked within that kind of spatial software as a place and as hyper media. The main focus of this paper is to stress and to describe the differences of the student’s results compared to common architectural design courses.
keywords	Algorithmic architecture, Second Life, virtual space design, learning platform
series	eCAADe
email
last changed	2022/06/07 07:50

_id	cdc2008_195
id	cdc2008_195
authors	Okabe, Aya; Tsukasa Takenaka and Jerzy Wojtowicz
year	2008
title	Beyond Surface: Aspects of UVN world in Algorithmic Design
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 195-204
summary	The need for architects to develop their own computational tools is becoming increasingly evident. In this paper, we introduced our design tool named ‘UVN generator’ which is based on the algorithmic process combining scripting potentiality and flexibility of traditional 3D surface modeling. Our attempt on combining the two served us well to explore the new ground for design. New conditions were explored and observed in the three case studies which are named ‘on a surface’, ‘between surfaces’ and ‘on a new ordered surface’, referring to place where the scripts were run. In design projects presented in our case studies, we focus on the system behind the generation of complex, expressive, biomimetic, yet humanistic shape. This challenge to find a new ground for computational design enables us to pose our critical question ‘What could be algorithmic design potential may lay beyond basic surfaces?’
email
last changed	2009/01/07 08:05

_id	radzjukevich02_paper_eaea2007
id	radzjukevich02_paper_eaea2007
authors	Radzjukewich, Andrey
year	2008
title	The Computer Methods of Construction Spiral Structures
source	Proceedings of the 8th European Architectural Endoscopy Association Conference
summary	The object of our research is geometric characteristics of spiral structures which are widely spread in nature (cones, sunflower beds…). It is a well-known fact that there is a proportional intercommunication according to the “golden section”. The correlation of the quantity of “right” and “left” spirals ties to have an irrational coefficient of “golden section” through the correlation numbers of 1,618… from Fibbonacci series ( 5/3, 8/5, 13/8, 21/13, 34/21, 55/34 …). When the proportion of “golden section” was found in the natural objects since the middle of the 19-th century (A.Zeizing), there began to appear a lot of hypotheses about some special aesthetic and technological characteristics of this proportion. The proportion of “golden section” became the most important architectural instrument in the first half of the 20-th century. This instrument made it possible to design beautiful and comfortable buildings (Le Corbusier). We tried to find a geometric way of building spiral structures which would be similar to natural ones. We solved this problem with the help of the developed algorythm the geometric characteristics of the cells of which spiral structures are built were investigated. It was found out that the cells of “golden” spiral structures don't have any special characteristics if compare with the cells of other spiral structures. During our work we found some spiral structures which have optimal geometric characteristics. These structures let's call them radial-hexagonal, have maximal area of a cell, though they have minimum perimeter. We also defined the main difference in the growing strategy of animate and inanimate structures. Inanimate structures grow by means of addition external elements. Animate structures grow by means of constant pushing of new elements which appear in the centre towards periphery. The optimal filling of the plane in the process of such growing is possible only by “golden section” of “right” and “left” spirals.
keywords	spirals, spiral lattices, a proportion of "gold section”
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

_id	ddss2008-26
id	ddss2008-26
authors	Slager, C.T.J.; B. de Vries, A.K. Bregt and A.J. Jessurun
year	2008
title	Methodology to generate landscape configurations foruse in multi-actor plan-making processes
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	In this paper, we investigate an approach to generate landscape configurations for use in multi-actor plan-making processes. Using the information from predefined lot typologies, a heuristic allocation method, consisting of a suitability function and an allocation mechanism of lot components is explained. The suitability function is primarily based on adjacency and distance parameters as found in landscape design literature. The allocation mechanism starts from a random but constrained initial situation, and generates a plausible lot configuration by orderly swapping pairs of cells thereby increasing the overall suitability of the plan . From the results, the limitations of this approach are concluded and the concepts are presented for an improved landscape generation algorithm.
keywords	Landscape configurations, spatial allocation, Landscape grammar, Cellular automata, Genetic Algorithms, Simulated Annealing
series	DDSS
last changed	2008/09/01 17:06

_id	ddss2008-02
id	ddss2008-02
authors	Gonçalves Barros, Ana Paula Borba; Valério Augusto Soares de Medeiros, Paulo Cesar Marques da Silva and Frederico de Holanda
year	2008
title	Road hierarchy and speed limits in Brasília/Brazil
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper aims at exploring the theory of the Social Logic of Space or Space Syntax as a strategy to define parameters of road hierarchy and, if this use is found possible, to establish maximum speeds allowed in the transportation system of Brasília, the capital city of Brazil. Space Syntax – a theory developed by Hillier and Hanson (1984) – incorporates the space topological relationships, considering the city shape and its influence in the distribution of movements within the space. The theory’s axiality method – used in this study – analyses the accessibility to the street network relationships, by means of the system’s integration, one of its explicative variables in terms of copresence, or potential co-existence between the through-passing movements of people and vehicles (Hillier, 1996). One of the most used concepts of Space Syntax in the integration, which represents the potential flow generation in the road axes and is the focus of this paper. It is believed there is a strong correlation between urban space-form configuration and the way flows and movements are distributed in the city, considering nodes articulations and the topological location of segments and streets in the grid (Holanda, 2002; Medeiros, 2006). For urban transportation studies, traffic-related problems are often investigated and simulated by assignment models – well-established in traffic studies. Space Syntax, on the other hand, is a tool with few applications in transport (Barros, 2006; Barros et al, 2007), an area where configurational models are considered to present inconsistencies when used in transportation (cf. Cybis et al, 1996). Although this is true in some cases, it should not be generalized. Therefore, in order to simulate and evaluate Space Syntax for the traffic approach, the city of Brasília was used as a case study. The reason for the choice was the fact the capital of Brazil is a masterpiece of modern urban design and presents a unique urban layout based on an axial grid system considering several express and arterial long roads, each one with 3 to 6 lanes,
keywords	Space syntax, road hierarchy
series	DDSS
last changed	2008/09/01 17:06

_id	ddss2008-32
id	ddss2008-32
authors	Chiaradia, Alain; Christian Schwander, Jorge Gil, Eva Friedrich
year	2008
title	Mapping the intangible value of urban layout (i-VALUL): Developing a tool kit for the socio-economic valuation of urbanarea, for designers and decision makers
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	In this paper we present the development of a GIS tool kit for the socioeconomic valuation of urban areas towards the creation of sustainable communities, describing the project context, development process, the tool kit’s structure, its main tools and initial feedback from its use. We then present the plan for training sessions and pilot projects where the tool kit is going to be used, and conclude with the discussion of the development of a single integrated tool to be used beyond the life of the ‘i-VALUL’ project. This project was supported by the UCL led UrbanBuzz programme within which UEL is a prime partner.
keywords	Urban planning, spatial analysis, design support tools, evaluation system, GIS
series	DDSS
last changed	2008/09/01 17:06

_id	caadria2008_73_session7a_601
id	caadria2008_73_session7a_601
authors	Gu, Ning; Jerry Jen-Hung Tsai
year	2008
title	An Interactive Graphical System for Collaborative Architectural Design in 3D Virtual Environments
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 601-608
doi	https://doi.org/10.52842/conf.caadria.2008.601
summary	This paper presents the development of an interactive graphical system applicable to collaborative architectural design in 3D virtual environments and its preliminary application for a building design project. This interactive graphical system integrates the spatial system and the stylistic system and specialises in styles representation and exploration in architectural design.
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	acadia08_472
id	acadia08_472
authors	Key, Sora; Mark D Gross; Ellen Yi-Luen Do
year	2008
title	Computing Spatial Qualities For Architecture
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 472-477
doi	https://doi.org/10.52842/conf.acadia.2008.472
summary	Computational representation of spatial qualities can lead us to a better understanding of how we construct spatial concepts. Analyses of spatial qualities can support architects in reasoning about the form of a configuration, helping them predict the consequences of a design. ¶ In this paper we present three definitions (enclosure, viewfield, continuity) that describe experiential qualities of architectural spaces. Our project aims to provide computable definitions to these qualities to describe common spatial experiences that are implicitly understood by architects. The description, using familiar terms, reveals the analytical structure of spatial qualities that is based on the geometry of the physical elements. ; We therefore introduce a graphic editor, Descriptor, that provides visualization of spatial qualities as the designer diagrams building elements. The system calculates perceived relationships (surrounded, visible, nearby, nearest) between a viewpoint and the architectural elements based on their geometric properties such as location and distance. The relationships are the components of the three qualities we define. We also present a use scenario to demonstrate how one might use our Descriptor system during early design. ¶ Descriptor is an attempt to formalize descriptions of the spatial qualities to help beginners understand how to make design decisions. In the future, we plan to extend the set of qualities and add detailed attributes of the physical elements to the system.
keywords	Analysis; Computation; Environment; Representation; Spatial
series	ACADIA
last changed	2022/06/07 07:52

_id	cdc2008_245
id	cdc2008_245
authors	Kim, Simon and Mariana Ibanez
year	2008
title	Tempus Fugit: Transitions and Performance in Activated Architecture
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 245-251
summary	Meaning in architecture has isotropic instances of realization, one that can unfold during the design process and one that can be layered onto the artifact of the building; its components and forms constitute a communication flow that emerges from an abstract form of description to its physicality. The internal cognition of this condition situates the subject as the third element, one that identifies the meaning from the extant building to its proxy meaning. In this manner, narrative and aesthetics perform the actualizations (the spatial and physical sequences) so that the occupant may understand its implications.1 Architecture is thus a one-directional flow of information (the building is an inert object from which meaning is derived, its physicality is static). Even in process-driven design, the synthesis of the many and the ordered, is evident in the materiality of the architectural manifestation; the building, although presented as a result of process cannot be separated from the reading of the generative operations. 2 Rather than continue in this manner of constructing meaning from an extensive coding (joining a concept to an object) or the instantiation (producing one from a larger field of possibilities) from a version, we suggest a dialectic that is bi-directional, or even multinodal, that is, continually self-renewing in meaning and material configuration with the active participation of the occupant. This representation is one that is time-based.
email
last changed	2009/01/07 08:05

_id	caadria2008_21_session3a_174
id	caadria2008_21_session3a_174
authors	Lan, Ju-Hung Kai-Han Chung
year	2008
title	Designing a Smart Workplace to Assist Design Activity from an Emotional Approach
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 174-179
doi	https://doi.org/10.52842/conf.caadria.2008.174
summary	In this paper, we are interested in developing a smart workplace to assist design activities during design processes from an emotional approach. A key problem in this study is how to design a smart environment, which is able to detect the designer’s emotional state and provides smart mechanism to assist design work. In the preliminary study, a spatial system prototype is developed to illustrate the design ideas of the smart workplace. Some triggered spatial events to describe the capabilities of assisting design activities from an emotional approach is introduced in the study. The framework of ubiquitous computing design in developing the smart workplace is introduced.
keywords	Smart Space, Emotional Design, Ubiquitous Computing
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2008_113
id	ecaade2008_113
authors	Montenegro, Nuno C.; Duarte , José Pinto
year	2008
title	Towards a Computational Description of Urban Patterns
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 239-248
doi	https://doi.org/10.52842/conf.ecaade.2008.239
summary	This study is concerned with the formulation of solutions for urban problems. It departs from Alexander’s pattern language theory and urban design guidelines, to create a system for generating specifications or the ingredients of a plan, given a scale, a site and a community. It takes into account strategies, regulations, guidelines, physical features of the site, and furthermore, the social, cultural and economic characteristics of the population. This system, sorted by a sequence of events, through stages, categories, methods and agents, describes taxonomic levels and their inner relations. Such an ontology provides a pattern encoding structure towards a computational model within the capabilities provided by the spatial data modeling of GIS (GIS-O). The urban formulation model is conceived to increase qualitative inputs, reducing ambiguities, through a flexible while automate process applied to urban planning.
keywords	Urban Formulation, Ontology, Pattern Language, GIS interoperability
series	eCAADe
email
last changed	2022/06/07 07:58

_id	caadria2008_29_session3b_236
id	caadria2008_29_session3b_236
authors	Nakapan, Walaiporn; Somkidt Yindeeyoungyeon
year	2008
title	Development of a Simple Web-based GIS System for Sustainable Housing Projects VisualizatioN
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 236-243
doi	https://doi.org/10.52842/conf.caadria.2008.236
summary	This paper presents a simple web-based GIS system for visualization of Baan Mankong, as known as sustainable housing projects for communities of low-incomers in Thailand. The Baan Mankong project has been so successful that numbers of projects initialized have been increasing during the past couple of years. The projects information is gathered in a huge database, but there is a lack of visualization tool to help the officers and executives to have a global view of the projects’ spatial distribution and to have a quick access to project information. GIS is proposed as a tool to be developed on the web for the visualization of this project. The Baan Mankong’s work flow and project information are studied in order to select only necessary information to be stored in the system. Then, the geographic visualization tool development process is presented.
keywords	GIS; Google Maps; sustainable housing; project database
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ecaade2008_138
id	ecaade2008_138
authors	Sdegno, Alberto
year	2008
title	Palladio’s Bridges: Graphic Analysis and Digital Interpretations
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 43-50
doi	https://doi.org/10.52842/conf.ecaade.2008.043
summary	The paper presents some results of a research on the digital reconstruction of some bridges designed by Andrea Palladio. The use of new technologies has enabled us to investigate the morphology of every single element and to be compared each other. Using the method of video animation, we have analyzed some of them in order to simulate the human perception and to understand their spatial configuration, but also to visualize the point of view of a man crossing a river or a canal. The last step was to prepare the models for producing some physical maquettes with the technique of rapid prototyping that have enabled us to verify the quality of the digital construction. Some different kinds of powder were used to identify the best one for the representation of architecture.
keywords	Digital reconstruction, geometric analysis, unbuilt projects, video, rapid prototyping
series	eCAADe
email
last changed	2022/06/07 07:59

_id	acadia08_390
id	acadia08_390
authors	Vrana, Andrew; Joe Meppelink; Ben Nicholson
year	2008
title	New Harmony Grotto
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 390-399
doi	https://doi.org/10.52842/conf.acadia.2008.390
summary	With the expanding wave of contemporary architecture inspired and informed by biomorphic design and biomimetic processes, the re-evaluation of work of Frederick Kiesler has become immanent. Throughout the mid 20th century he became increasingly interested in the relationship of natural form and structure to architectural space and organization. The Grotto for Meditation proposed in 1963 for New Harmony, Indiana commissioned by Mrs. Jane Blaffer-Owen was the culmination of his life’s work. Though the project was not realized, it embodies all of the influences of his time from surrealism to biology and cybernetic theory. Through our university and the Blaffer Foundation, we engaged in formal research and tectonic resolution of the project employing digital modeling and fabrication technologies at our College and in Houston where Mrs. Owen lives when she is not in New Harmony. We based this project on the full catalog of archival material made available to us with support from the Blaffer and Kielser Foundations. Our exploration also was influenced by discussions with Mrs. Blaffer-Owen who is still very interested in realizing this profoundly interesting and enigmatic project. Our university has opened the door to the opportunity that our reinterpreted Grotto become a permanent fixture on the campus next to a wetland landscape that it is currently under construction. Our research into Kiesler has engaged his esoteric concepts of “co-realism” and “continuous tension” as well as his early use of recursive geometry and biomorphic form in design. From reverse engineering and digital fabrication via 3D scanning to generative structural articulation, we are experimenting with a structural/spatial system that closely aligns with Kiesler’s originally proposed tile patterning dilated into a minimal structure. Our prototypes and the final version will be fabricated by one of the largest commercially for-hire water jet cutter in country and assembled on the site.
keywords	Biomorphic; Digital Fabrication; Prototype; Structure
series	ACADIA
last changed	2022/06/07 07:58

_id	asanowicz02_paper_eaea2007
id	asanowicz02_paper_eaea2007
authors	Asanowicz, Aleksander; Katarzyna Asanowicz
year	2008
title	The Dynamic Perception of Digitally Created Abstract Urban Space
source	Proceedings of the 8th European Architectural Endoscopy Association Conference
summary	Sigmund Freud in his book has used a City as a Metaphor of human Psyche. According to him City is not only images of the forms given us in the process of perception but all invisible and nowadays not existing forms (buildings) too. This way of representing historical sequences is possible thanks to ability of our mind to parallel consideration of different spatial meanings. Aldo Rossi called it - “analogous City” – a city which includes the existing buildings, buildings which was existed in the same place in the past and imaginary buildings (our visions of future development of the city). As a result – City is a place where real and virtual meet. Aldo Rossi presents an “analogous city” as a mental map which includes real and unreal forms representing, at the same time, remembered and imagined events. He has written: “When we back to the place after long absence we not only recognize it, but at the same time start remembering events which has happened at this place in the past. Peter Eisenman in “The City of Artificial Excavation” has analyzed the city as an archaeologist, who excaved forgotten buildings and showed us unknown connections and meanings.
keywords	city perception, emotions, digital composition
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

_id	sigradi2008_077
id	sigradi2008_077
authors	Briones, Carolina
year	2008
title	A collaborative project experience in an architectural framework, working with Open Source applications and physical computing [Diseño de Plataformas Digitales e Interactivas: una experiencia educativa trabajando colaborativamente con aplicaciones de Código Abierto y Computación Física]
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	Nowadays, thanks to the telecommunication revolution and therefore the massive spread of Internet, we have seen the come up of international architectural offices with branches located in different continent, working in a collaborative fashion, surpassing physical and time frontiers. At the same time, the multidisciplinary work between designers, architects, engineers, programmers and even biologist, between others, have been taking place in the new network society. All transformations also supported by the arising of FOSS (Free Open Source Software) and the virtual communities behind them, which allow the creation of non-traditional or specific software, the association between disciplines, and also, the formation of meeting scenarios for a mixture of individuals coming up with multiple motivation to coexist in collaborative environment. Furthermore, it is possible to argue that Open Source applications are also the reflection of a social movement, based on the open creation and exchange of information and knowledge. Do the appeared of FOSS compel us to re-think our working and teaching methods? Do they allow new modes of organizing and collaborating inside our architectural practices?. This paper would like to address these questions, by presenting the results of the “Experience Design” course, which by implementing teaching methods based on Open Source principles and cutting-edge tools, seeks to approach students to these new “way of do”, knowledge and methodologies, and overall, focus them on the science behind the computer. This paper describes the “Experience Design” course, in which architectural graduate students of Universidad Diego Portales (Chile), put for first time their hands on the creation of interactive interfaces. By acquiring basic knowledge of programming and physical computing, students built in a collaborative way a responsive physical installation. The course use as applications “Processing” and “Arduino”. The first one is an Open Source programming language and environment for users who want to program images, animation, and interactions. It has a visual context and serve as a software sketchbook and professional production tool. Processing is a project initiated by Ben Fry and Casey Reas, at the MIT Media Lab (www.processing.org). The second is an Open Source electronics prototyping platform based on flexible, easy-to-use hardware and software. Arduino has a microcontroller (programmed with Processing language) which can sense the environment by receiving input from a variety of sensors and can affect its surroundings by controlling lights, motors, and other actuators (www.arduino.cc). Both environments shared a growing community of people working in related projects and extending useful assistance for beginners. In this paper it is presented the current state of the pilot course and some of the initials results collected during the process. Students and teacher’s debates and evaluations of the experience have been exposed. Together with a critical evaluation in relation to the accomplishment of the effort of place together different disciplines in one collaborative project akin, architecture, design, programming and electronic. Finally, futures modifications of the course are discussed, together with consideration to take in account at the moment of bring Open Source and programming culture into the student curriculum.
keywords	Physical computing, teaching framework, Open Source, Interactive Installation
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2008_69_session7a_572
id	caadria2008_69_session7a_572
authors	Lertlakkhanakul, Jumphon; Seoyoung Lee, Jinwon Choi
year	2008
title	A Study of The Effects of Placeness on Collaborative Virtual Workplace
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 572-578
doi	https://doi.org/10.52842/conf.caadria.2008.572
summary	So far, there is no empirical study on how ‘placeness’ can affect virtual workplace model. This problem has continuously been overlooked. The research objectives are to verify the effectiveness of ‘workplace metaphor’ and to find out factors that constitute ‘placeness’, the properties of being a place, in collaborative virtual workplace. An experiment was conducted to test the framework. At the end, different virtual workplace settings can result in dissimilar user behavior in terms of teamwork and attitude toward the workplace as disparate settings imply different requirements on function, organizational culture, and social meaning. In conclusion, if architectural elements are carefully applied to the virtual office, it cans strengthen teamwork and enhances social interaction.
keywords	Collaborative virtual workplace; collaborative virtual environments; office ecology; place metaphor; socio-spatial behavior
series	CAADRIA
email
last changed	2022/06/07 07:52

For more results click below: