Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 491

Reformat results as: short short into frame detailed detailed into frame

_id	cf2011_p108
id	cf2011_p108
authors	Iordanova, Ivanka; Forgues Daniel, Chiocchio François
year	2011
title	Creation of an Evolutive Conceptual Know-how Framework for Integrative Building Design
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 435-450.
summary	Low productivity of the building sector today is attributed to the fragmentation of tasks, disciplines and responsibilities, as well as to the resistance to adopt integrative work processes and digital means. The increased complexity of architectural projects and the aroused social consciousness for sustainable environment calls for integrative design collaboration. Thus, there is need for a Conceptual Framework combining work processes, technological means and policy aspects. According to the literature, integrative multidisciplinary design is a strategy resulting in high performance buildings nurturing sustainable way of living (Reed et al. 2009, Krygiel & Nies 2008). Responding to the increased technological complexity of our built environment, as well as to the objective of meeting multiple criteria of quality, both necessitating multidisciplinary collaboration during design, Building Information Modeling (BIM) is seen as a powerful means for fostering quality, augmenting productivity and decreasing loss in construction. Based on recent research, we can propose that a sustainable building can be designed through an integrative design process (IDP) which is best supported by BIM. However, our ongoing research program and consultations with advanced practitioners underscore a number of limitations. For example, a large portion of the interviewed professionals and construction stakeholders do not necessarily see a link between sustainable building, integrative design process and BIM, while in our opinion, their joint use augments the power of each of these approaches taken separately. Thus, there is an urgent necessity for the definition of an IDP-BIM framework, which could guide the building industry to sustainable results and better productivity. This paper defines such a framework, whose theoretical background lays on studies in social learning (activity theory and situated action theories). These theories suggest that learning and knowledge generation occurs mainly within a social process defined as an activity. This corresponds to the context in which the IDP-BIM framework will be used, its final objective being the transformation of building design practices. The proposed IDP-BIM framework is based on previous research and developments. Thus, firstly, IDP process was well formalized in the Roadmap for the Integrated Design Process‚ (Reed et al.) which is widely used as a guideline for collaborative integrative design by innovating practices in USA and Canada. Secondly, the National Building Information Modeling Standard (NBIMS) of the USA is putting an enormous effort in creating a BIM standard, Succar (2008) recently proposed a conceptual framework for BIM, but BIM ontology is still under development (Gursel et al 2009). Thirdly, an iterative design process bound to gating reviews (inspired from software development processes) was found to be successful in the context of multidisciplinary design studios (reported in our previous papers). The feedback from this study allowed for modifications and adjustments included in the present proposal. The gating process assures the good quality of the project and its compliance to the client's requirements. The challenge of this research is to map the above mentioned approaches, processes and technologies into the design process, thus creating an integrated framework supporting and nurturing sustainable design. The IDP-BIM framework can be represented by a multidimensional matrix linked to a semantic network knowledge database: - the axes of the matrix being the project timeline, the design process actors and building stakeholders (architect, engineers, client, contractor, environmental biologist, etc.), or different aspects of building performance (environmental, functional, social, interior environment quality, cost, etc.); and - the knowledge database providing multiple layers of semantic support in terms of process, domain knowledge, technology and workflow at a given moment of the project and for a given actor or building aspect. The IDP-BIM framework is created as an evolutive digital environment for know-how and will have an established protocol for regular updates. The paper will firstly present the state of the art in IDP and BIM. Secondly, it will expose the methodology used for the definition of the Framework, followed by a description of its structure, contents and digital implementation. Then, some scenarios for the use of the Framework will be shown as validation.
keywords	integrated design process, BIM, multidisciplinary design, conceptual framework
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2008_072
id	ecaade2008_072
authors	Coates, Paul S.; Derix, Christian W.
year	2008
title	Smart Solutions for Spatial Planning
doi	https://doi.org/10.52842/conf.ecaade.2008.231
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 231-238
summary	SSSP is a Government funded knowledge transfer project under the overall umbrella of the UK ‘building sustainable communities’ initiative. The paper describes the innovative techniques being developed by the partners to build urban modelling tools for multiple simulation or regeneration scenarios in the Thames Gateway region of London. This knowledge transfer scheme is between the main partners and the London boroughs of Newham and Tower Hamlets. The main aim is to demonstrate the use of digital data in the development of planning scenarios. The aim is to demonstrate a workflow, which should provide stakeholders with a way of testing regeneration options, which are grounded on ‘real’ data and are capable of providing rapid feedback for policy makers and inhabitants alike.
keywords	GIS: Data Analysis: Urban modelling: Ant Colony Optimisation: Dijkstra shortest path algorithm
series	eCAADe
email
last changed	2022/06/07 07:56

_id	cdc2008_377
id	cdc2008_377
authors	Conrad, Erik
year	2008
title	Rethinking the Space of Intelligent Environments
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 377-382
summary	Technologies are not mere exterior aids but interior changes of consciousness that shape the way the world is experienced. As we enter the age of ubiquitous computing, where computers are worn, carried or embedded into the environment, we must be careful that the ideology the technology embodies is not blindly incorporated into the environment as well. As disciplines, engineering and computer science make implicit assumptions about the world that conflict with traditional modes of cultural production. Space is commonly understood to be the void left behind when no objects are present. Unfortunately, once we see space in this way, we are unable to understand the role it plays in our everyday experience. In this paper, I argue that with the realization of the vision of ubiquitous computing, the fields of computer science and engineering reify the dominance of abstract space in real space. A new approach to the design of computing systems is necessary to reembody space. The social nature of the interface allows us to situate it within Henrí Lefebvre’s notions of space, providing new tools for thinking about how computing practice engages space as well as opening avenues to rematerialize the environment through embodied interaction.
email
last changed	2009/01/07 08:05

_id	acadia08_126
id	acadia08_126
authors	Cook+Fox Architects
year	2008
title	The Generation of a Smart Cloud
doi	https://doi.org/10.52842/conf.acadia.2008.126
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 126-133
summary	This paper presents the process by which Cook+Fox Architects responded to a design challenge that was part metaphorical and part practical. The project involved providing an environmental response to the natural world existing almost 800 feet above the ground, on the second-highest occupiable floor of New York City’s second-tallest building. Environmentally-responsive features at the Bank of America Tower at One Bryant Park are expected to make it the first LEED-Platinum high-rise in the world. The fiftieth floor was conceived as a headquarters for the fashion designer Elie Tahari, the south facing portion of the floorplate was to house a highly adaptable showroom that needed to be adaptable to complement and enhance each season’s particular aesthetics. Additionally, the ceiling in the showroom space needed to allow for optimized height in an environment where structural, mechanical, electrical and sprinkler systems were all designed to be concealed. A combination of numerous computer-aided design scripts took into account various input variables and finally led to the generation of a Smart Cloud.
keywords	Analysis; Behavior; Generative; Optimization; Performance
series	ACADIA
last changed	2022/06/07 07:56

_id	ijac20076106
id	ijac20076106
authors	Donath, Dirk; Bohme, Luis Felipe Gonzalez
year	2008
title	Constraint-Based Design in Participatory Housing Planning
source	International Journal of Architectural Computing vol. 6 - no. 1, pp. 97-117
summary	We introduce some novel ideas for a constraint-based design strategy to support participatory housing planning processes in Latin America. The following lines intend to open the discussion on the requirements and effect of the computer implementation of a constraint satisfaction approach to solve elementary design problems in architectural practice. The case study applies to the building massing design problem posed by the Chilean urban regulatory framework that addresses single-family affordable houses. Two different implementation criteria are being tested in an ongoing series of trials providing further considerations. One prototype uses MAXON's CINEMA4D XPRESSO® visual scripting environment to set up a semi-automated design environment which allows users to edit one feature-based 3D model of massing alternative at a time. The other prototype uses ILOG's OPL STUDIO® constraint programming environment to achieve fully automated search and 2D visualization of all possible solution alternatives to separate subdomains of the building massing design problem.
series	journal
last changed	2008/06/18 08:12

_id	ecaade2010_065
id	ecaade2010_065
authors	Hardy, Steve(n); Lundberg, Jonas
year	2010
title	Environmental Catalysts for a Computational Urbanism
doi	https://doi.org/10.52842/conf.ecaade.2010.805
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.805-814
wos	WOS:000340629400086
summary	It is perhaps no longer relevant to discuss digital tools purely as means in themselves; the growth of abstract systems or computational patterns for their own sake simply strain justification in light of real-world concerns such as climate change and economic crises. While growing concerns over climate change have necessitated an increased interest in sustainable urbanism and design, sustainability has done little to yet alter the morphological and typological consequences of architectural space (Hardy, 2008). In a series of overlapping research projects and design studio briefs, students, research assistants and we worked with the iterative and variable processes of Rhinoscript, McNeel’s Grasshopper and Bentley’s Generative Components to explore the possibilities of changing environmental extremes (specifically flooding) as catalysts for providing new urban morphologies and spatial organizations. Working between the master plan and the individual housing unit, we investigated arrays of terrace homes in the London Thames Valley flood zones while simultaneously exploring the potential for computational generation and parametric optimization.
keywords	Computational urbanism; Formative strategies; Parametric design; Adaptive vs. mitagative; Environmental formations
series	eCAADe
email
last changed	2022/06/07 07:49

_id	acadia08_458
id	acadia08_458
authors	Hemsath, Timothy; Robert Williams; Ronald Bonnstetter; Leen-Kiat Soh
year	2008
title	Digital CADCAM Pedagogy Model: Intelligent Inquiry Education
doi	https://doi.org/10.52842/conf.acadia.2008.458
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 458-463
summary	Prototype manufacturing as an educational tool has been very successful at the college level in architecture and engineering design. This paper discusses an innovative inquiry-based learning approach rather than the problem-based learning models commonly utilized by other similar programs. For example, several research-funded technology projects (e.g., Cappelleri et al. 2007) look at involving students in problem-based learning exercises (e.g., building robots); however, these exercises (while providing valuable experiences) have predetermined outcomes ingrained by the teachers, the project structure, and the components used to construct the devices. Therefore, inquisitive and creative problem solving is limited to the “kit-of-parts” in their approach to solving the problem. The inquiry-based CADCAM pedagogy model is more concerned with the process of solving a problem through the vehicle of prototyping than with the specificity of the design project itself. This approach has great potential. First, the need to solve the problem drives learning on multiple levels, integrating interdisciplinary ideas into the problem and solution. Second, the problem interlocks disciplines through inquiry knowledge building in team exercises. Finally, it encourages diversity and flexibility by allowing students to look at problems from multiples perspectives and points of view.
keywords	CAD; Education; Evaluation; Pedagogy; Rapid Prototyping
series	ACADIA
last changed	2022/06/07 07:49

_id	caadria2008_71_session7a_587
id	caadria2008_71_session7a_587
authors	Reffat, Rabee M.; Yaman Khaeruzzaman, Emad El-Sebakhy, I Putu Raharja
year	2008
title	Interactive Architectural Compositions in 3D Real-Time Virtual Environments
doi	https://doi.org/10.52842/conf.caadria.2008.587
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 587-593
summary	This paper presents an interactive computational system for developing architectural compositions within a 3D real-time virtual environment. The features of implemented system within the interface of Activeworlds platform includes (a) providing a set of 3D building objects that are made available within the virtual environment and can be utilized by the user to construct architectural compositions; (b) allowing users to modify both geometrical and non-geometrical properties of these objects; and (c) maintaining interrelationships between these objects using constrain-based rules automated by the developed system in real-time. The developed IAMVE (Interactive Architectural Modeling in Virtual Environments) system provides more flexibility to architectural designers and develops an edge to multi-user real time 3D virtual environments to be better utilized in the context of architectural design
keywords	3D Virtual Environments, 3D Modeling; Architectural Compositions, User Interactivity
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	sigradi2008_090
id	sigradi2008_090
authors	Righi, Thales; Gabriela Celani
year	2008
title	Technologies for interactive displays [Tecnologias de displays interativos no processo de projeto arquitetônico]
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This paper aims to discuss the possibilities of interactive displays in architecture´s design, the article starts discussing how the computational methods transformed the way of thinking architecture. Then are presented and analyzed some technologies that can be built into the workshop of the project architecture, among them: opaque and LCD tablets, chambers of immersion, whiteboards and interactive screens and equipment´s of tangible digital information (Tangible Bits). It appears that the trend of technological innovations is a mix of traditional and digital, facilitating the manipulation and production of drawings by architects through direct touch, some of the technologies are already considered viable, providing low cost and good results during the practice of design.
keywords	Displays interativos, metodologia de projeto, manual x digital
series	SIGRADI
type	normal paper
email
last changed	2016/03/10 09:58

_id	acadia08_222
id	acadia08_222
authors	Westre, Aaron
year	2008
title	Complexity Machine 1: A 3D Modeling Application Implementing Behavioral Simulation
doi	https://doi.org/10.52842/conf.acadia.2008.222
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 222-229
summary	Complexity Machine 1 is a software application developed by the author as a Master of Architecture thesis project at the University of Minnesota. The software acts as a platform for exploring three dimensional form produced via behavioral simulation. Specifically, the behaviors are modeled on emergent group dynamics found commonly in nature such as flocking, chasing, and evading. Though various commercial softwares and numerous small-scale architectural projects exist in this area, Complexity Machine 1 is intended as a freely available and generic platform for exploring the formal implications of these emergent behaviors. The simulated behaviors are governed by a variety of parameters and a set of eight simple rules. Formal results are influenced by these parameters and rules; along with scale, color, and geometric settings. The flexibility of the software allows users to investigate a vast array of potential forms, adjust settings in real time, and export the results for further manipulation. Complexity Machine 1 continues to be refined and improved towards the goal of providing an easy to use platform to designers for exploring forms that emerge from complex group behavior.
keywords	Behavior; Complexity; Emergence; Flocking; Simulation
series	ACADIA
last changed	2022/06/07 07:57

_id	ecaade2008_125
id	ecaade2008_125
authors	Wu, Kuan-Ying
year	2008
title	Elastic Room
doi	https://doi.org/10.52842/conf.ecaade.2008.905
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 905-912
summary	This paper proposes a physical toolkit and a flexible software framework to simplify the design and exploration of interactive systems for multiple users, devices, and applications in a smart environment. The toolkit, called Elastic-Room, was designed as an infrastructure for interaction design, in which each device is a component that works collaboratively in the smart environment. The supporting software framework includes a dynamically reconfigurable intermediary which simplify the mapping of each device and also use simple protocol to broadcast information to each device. Finally, we demonstrate the Elastic-Room architecture by providing some implemented examples, which are organized in a prototype space of ubiquitous computing full of interactive components.
keywords	Ubiquitous computing, tangible user interfaces, smart environments, interactive design
series	eCAADe
email
last changed	2022/06/07 07:57

_id	caadria2008_3_session1a_029
id	caadria2008_3_session1a_029
authors	Ambrose, Michael A., Carl Lostritto, Luc Wilson
year	2008
title	Animate education Early Design Education Pedagogy
doi	https://doi.org/10.52842/conf.caadria.2008.029
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 29-35
summary	This paper presents a novel approach to the introduction and use of animation and motion graphics in foundation design education. Design inquiry and understanding as generated from, and translated by, movement is the focus. This work explores animation as a design methodology in the first weeks of architectural education. The proposed design exercise discussed here will probe the concept/context and spatial/visual literacy of the learned sense of space-time in architectural design education and representation. Here the digital application of animation and motion graphics is intended to be process driven to encourage students to find an attitude about solutions rather than a solution to the design project. The intention is to examine the relationship between form and space through a structured exploration of movement within a kit-of-parts design project that explores a three-dimensional spatial construct. Animation as a design method poses unique potentials and pitfalls. Animation and motion graphics, as a collection of instances, is both questioned and exaggerated. This project creates a threshold experience of learning that puts in motion an exploration of integrated digital process and design product.
keywords	Education, design theory, design studies, animation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2008_160
id	ecaade2008_160
authors	Aschwanden, Gideon; Halatsch, Jan; Schmitt , Gerhard
year	2008
title	Crowd Simulation for Urban Planning
doi	https://doi.org/10.52842/conf.ecaade.2008.493
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 493-500
summary	This paper presents a semi-automatic visualization method for the evaluation of urban environments that is based on artificial intelligence. It proposes the use of agent-based crowd simulation software on a mid-scale urban planning level for design evaluation. The information on agents’ movements is noted in standard raster images. The results are maps that are easy to understand. These maps show movement paths of the agents and density and give further conclusion on bottlenecks in planning contexts. Key measures, like the occupant movement in a given district, until now relied greatly on empirical knowledge or data that could be only gathered after an urban design had become built reality. Our method focuses on the adaptation of common software technology that is originally situated in film and TV productions. A practical workflow shows how our method can be easily integrated in daily design tasks.
keywords	Artificial intelligence, agent-based, crowd simulation, urban planning, design evaluation, occupant movement
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia08_464
id	acadia08_464
authors	Belcher, Daniel; Brian Johnson
year	2008
title	MxR: A Physical Model-Based Mixed Reality Interface for Design Collaboration, Simulation, Visualization and Form Generation
doi	https://doi.org/10.52842/conf.acadia.2008.464
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 464-471
summary	MxR—pronounced “mixer”—is a Mixed/Augmented Reality system intended to support collaboration during early phases of architectural design. MxR allows an interdisciplinary group of practitioners and stakeholders to gather around a table, discuss and test different hypotheses, visualize results, simulate different physical systems, and generate simple forms. MxR is also a test-bed for collaborative interactions and demonstrates different configuration potentials, from exploration of individual alternatives to group discussion around a physical model. As a MR-VR transitional interface, MxR allows for movement along the reality-virtuality continuum, while employing a simple tangible user-interface and a MagicLens interaction technique.
keywords	Augmented Reality; Collaboration; Interactive; Interface; Physical Modeling
series	ACADIA
last changed	2022/06/07 07:54

_id	sigradi2008_049
id	sigradi2008_049
authors	Benamy, Turkienicz ; Beck Mateus, Mayer Rosirene
year	2008
title	Computing And Manipulation In Design - A Pedagogical Experience Using Symmetry
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	The concept of symmetry has been usually restricted to bilateral symmetry, though in an extended sense it refers to any isometric transformation that maintains a certain shape invariant. Groups of operations such as translation, rotation, reflection and combinations of these originate patterns classified by modern mathematics as point groups, friezes and wallpapers (March and Steadman, 1974). This extended notion represents a tool for the recognition and reproduction of patterns, a primal aspect of the perception, comprehension and description of everything that we see. Another aspect of this process is the perception of shapes, primary and emergent. Primary shapes are the ones explicitly represented and emergent shapes are the ones implicit in the others (Gero and Yan, 1994). Some groups of shapes known as Semantic Shapes are especially meaningful in architecture, expressing visual features so as symmetry, rhythm, movement and balance. The extended understanding of the concept of symmetry might improve the development of cognitive abilities concerning the creation, recognition and meaning of forms and shapes, aspects of visual reasoning involved in the design process. This paper discusses the development of a pedagogical experience concerned with the application of the concept of symmetry in the creative generation of forms using computational tools and manipulation. The experience has been carried out since 1995 with 3rd year architectural design students. For the exploration of compositions based on symmetry operations with computational support we followed a method developed by Celani (2003) comprising the automatic generation and update of symmetry patterns using AutoCAD. The exercises with computational support were combined with other different exercises in each semester. The first approach combined the creation of two-dimensional patterns to their application and to their modeling into three-dimensions. The second approach combined the work with computational support with work with physical models and mirrors and the analysis of the created patterns. And the third approach combined the computational tasks with work with two-dimensional physical shapes and mirrors. The student’s work was analyzed under aspects such as Discretion/ Continuity –the creation of isolated groups of shapes or continuous overlapped patterns; Generation of Meta-Shapes –the emergence of new shapes from the geometrical relation between the generative shape and the structure of the symmetrical arrangement; Modes of Representation –the visual aspects of the generative shape such as color and shading; Visual Reasoning –the derivation of 3D compositions from 2D patterns by their progressive analysis and recognition; Conscious Interaction –the simultaneous creation and analysis of symmetry compositions, whether with computational support or with physical shapes and mirrors. The combined work with computational support and with physical models and mirrors enhanced the students understanding on the extended concept of symmetry. The conscious creation and analysis of the patterns also stimulated the student’s understanding over the different semantic possibilities involved in the exploration of forms and shapes in two or three dimensions. The method allowed the development of both syntactic and semantic aspects of visual reasoning, enhancing the students’ visual repertoire. This constitutes an important strategy in the building of the cognitive abilities used in the architectural design process.
keywords	Symmetry, Cognition, Computing, Visual reasoning, Design teaching
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2008_077
id	sigradi2008_077
authors	Briones, Carolina
year	2008
title	A collaborative project experience in an architectural framework, working with Open Source applications and physical computing [Diseño de Plataformas Digitales e Interactivas: una experiencia educativa trabajando colaborativamente con aplicaciones de Código Abierto y Computación Física]
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	Nowadays, thanks to the telecommunication revolution and therefore the massive spread of Internet, we have seen the come up of international architectural offices with branches located in different continent, working in a collaborative fashion, surpassing physical and time frontiers. At the same time, the multidisciplinary work between designers, architects, engineers, programmers and even biologist, between others, have been taking place in the new network society. All transformations also supported by the arising of FOSS (Free Open Source Software) and the virtual communities behind them, which allow the creation of non-traditional or specific software, the association between disciplines, and also, the formation of meeting scenarios for a mixture of individuals coming up with multiple motivation to coexist in collaborative environment. Furthermore, it is possible to argue that Open Source applications are also the reflection of a social movement, based on the open creation and exchange of information and knowledge. Do the appeared of FOSS compel us to re-think our working and teaching methods? Do they allow new modes of organizing and collaborating inside our architectural practices?. This paper would like to address these questions, by presenting the results of the “Experience Design” course, which by implementing teaching methods based on Open Source principles and cutting-edge tools, seeks to approach students to these new “way of do”, knowledge and methodologies, and overall, focus them on the science behind the computer. This paper describes the “Experience Design” course, in which architectural graduate students of Universidad Diego Portales (Chile), put for first time their hands on the creation of interactive interfaces. By acquiring basic knowledge of programming and physical computing, students built in a collaborative way a responsive physical installation. The course use as applications “Processing” and “Arduino”. The first one is an Open Source programming language and environment for users who want to program images, animation, and interactions. It has a visual context and serve as a software sketchbook and professional production tool. Processing is a project initiated by Ben Fry and Casey Reas, at the MIT Media Lab (www.processing.org). The second is an Open Source electronics prototyping platform based on flexible, easy-to-use hardware and software. Arduino has a microcontroller (programmed with Processing language) which can sense the environment by receiving input from a variety of sensors and can affect its surroundings by controlling lights, motors, and other actuators (www.arduino.cc). Both environments shared a growing community of people working in related projects and extending useful assistance for beginners. In this paper it is presented the current state of the pilot course and some of the initials results collected during the process. Students and teacher’s debates and evaluations of the experience have been exposed. Together with a critical evaluation in relation to the accomplishment of the effort of place together different disciplines in one collaborative project akin, architecture, design, programming and electronic. Finally, futures modifications of the course are discussed, together with consideration to take in account at the moment of bring Open Source and programming culture into the student curriculum.
keywords	Physical computing, teaching framework, Open Source, Interactive Installation
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2008_134
id	ecaade2008_134
authors	Burry, Jane; Burry, Mark
year	2008
title	The Bonds of Spatial Freedom
doi	https://doi.org/10.52842/conf.ecaade.2008.301
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 301-308
summary	In education and research at this time there is arguably no longer a need to build a strong case for the power of CAAD to support designers – the evidence is there. The major challenges no longer centre on hardware, software and graphics potential or on skills acquisition and adoption. The research that we will report here reveals that computational complexity and geometrical complexity are emerging as the sharp issues that demand a major review of how we model the large hybrid spaces that we seek to construct in design. Computational relational modeling and scripting may have opened a trove of creative possibilities. But it may delude us into painting ourselves into a corner: infinite variety within a much reduced palette of opportunities.
keywords	Architectural Geometry, relational modeling, parametric design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia08_340
id	acadia08_340
authors	Chalmers, Chris
year	2008
title	Chemical Signaling as a Model for Digital Process in Architecture
doi	https://doi.org/10.52842/conf.acadia.2008.340
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 340-345
summary	The role of the architect is quite literally one of assembly: synthesizing the various parts of a project into a cohesive whole. It is a difficult job, often requiring the architect to weave many seemingly contradictory concerns into a solution that benefits them all. It is not surprising then, that the many elegant and effective systems found in nature should be inspiring to the architect. Emerging fields like biomimicry and systems dynamics model the patterns of interaction between organisms and their environments in terms of dynamic part to part and part to whole relationships. ¶ Observations of real relationships between organisms and their environments, as they exist in nature, reveal complex feedback loops working across multiple scales. These feedback loops operate by the simultaneous action of two observed phenomena. The first is the classic phenotypic relationship seen when organisms of the same genetic makeup instantiate differently based upon differences in their environment. This is the relationship that was originally proposed by Charles Darwin in his theory of natural selection of 1859. Darwin’s model is unidirectional: the organism adapts to its environment, but not the other way around. It operates at the local scale as individual parts react to the conditions of the whole. (Canguilhem, 1952). ¶ The second phenomenon, which sees its effect at the global scale, is the individual’s role as consumer and producer in the flows of energy and material that surround it. It is the subtle and incremental influence of the organism upon its environment, the results of which are often invisible until they reach a catastrophic threshold, at which point all organisms in the system feel global changes. ; The research presented in this paper addresses the dialectic between organism and environment as each responds reciprocally to the others’ changing state. Such feedback loops act in a non-linear fashion, across nested scales in biological systems. They can be modeled to act that way in a digital design process as well. This research is an exploration into one such model and its application to architecture: the simple communication between organisms as they affect and are affected by their environments through the use of signal chemicals.
keywords	Biology; Cellular Automata; Feedback; Material; Scripting
series	ACADIA
last changed	2022/06/07 07:55

_id	ddss2008-47
id	ddss2008-47
authors	Den Otter, Ad F. and H.J. Pels
year	2008
title	Rivalry between the collective use of IT tools and working methods of design teams Comparison of research outcomes
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Nowadays a high variety of IT tools is available for communication purposes in design processes on individual and group level. Despite this, the exchange and sharing of design documents collectively in design and engineering teams might be limited mainly, due to habits, preferences, working methods and rivalry between the collective use of IT tools in such product development. Changes in habits and preferences for collective use of IT tools might be realized by training and management power. However, adoption of collectively to be used tools, like project websites, is depending heavenly on the attractiveness for users in daily work. Based on empirical research outcomes it is indicated that rivalry between collective used tools and differences in working methods of users might be main barriers for attractiveness of these tools in daily work. Applying a framework for analyzing and categorizing of the frequency of use of IT tools for team communication, the authors explain the appearance of rivalry between tools, limiting the effectiveness in daily work and not affecting team communication and performance. By comparison of working methods in different sectors authors explain the necessity of changes in working methods in design and engineering in the building & construction industry on organizational and inter-organizational level for successful adoption of collectively to be used IT tools in team communication.
keywords	Rivalry between IT tools, collective use, team communication, team performance, working habits, preferences, working methods, 2nd order of change
series	DDSS
last changed	2008/09/01 17:06

For more results click below: