Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 392

Reformat results as: short short into frame detailed detailed into frame

_id	acadia16_140
id	acadia16_140
authors	Nejur, Andrei; Steinfeld, Kyle
year	2016
title	Ivy: Bringing a Weighted-Mesh Representations to Bear on Generative Architectural Design Applications
doi	https://doi.org/10.52842/conf.acadia.2016.140
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 140-151
summary	Mesh segmentation has become an important and well-researched topic in computational geometry in recent years (Agathos et al. 2008). As a result, a number of new approaches have been developed that have led to innovations in a diverse set of problems in computer graphics (CG) (Sharmir 2008). Specifically, a range of effective methods for the division of a mesh have recently been proposed, including by K-means (Shlafman et al. 2002), graph cuts (Golovinskiy and Funkhouser 2008; Katz and Tal 2003), hierarchical clustering (Garland et al. 2001; Gelfand and Guibas 2004; Golovinskiy and Funkhouser 2008), primitive fitting (Athene et al. 2004), random walks (Lai et al.), core extraction (Katz et al.) tubular multi-scale analysis (Mortara et al. 2004), spectral clustering (Liu and Zhang 2004), and critical point analysis (Lin et al. 20070, all of which depend upon a weighted graph representation, typically the dual of a given mesh (Sharmir 2008). While these approaches have been proven effective within the narrowly defined domains of application for which they have been developed (Chen 2009), they have not been brought to bear on wider classes of problems in fields outside of CG, specifically on problems relevant to generative architectural design. Given the widespread use of meshes and the utility of segmentation in GAD, by surveying the relevant and recently matured approaches to mesh segmentation in CG that share a common representation of the mesh dual, this paper identifies and takes steps to address a heretofore unrealized transfer of technology that would resolve a missed opportunity for both subject areas. Meshes are often employed by architectural designers for purposes that are distinct from and present a unique set of requirements in relation to similar applications that have enjoyed more focused study in computer science. This paper presents a survey of similar applications, including thin-sheet fabrication (Mitani and Suzuki 2004), rendering optimization (Garland et al. 2001), 3D mesh compression (Taubin et al. 1998), morphin (Shapira et al. 2008) and mesh simplification (Kalvin and Taylor 1996), and distinguish the requirements of these applications from those presented by GAD, including non-refinement in advance of the constraining of mesh geometry to planar-quad faces, and the ability to address a diversity of mesh features that may or may not be preserved. Following this survey of existing approaches and unmet needs, the authors assert that if a generalized framework for working with graph representations of meshes is developed, allowing for the interactive adjustment of edge weights, then the recent developments in mesh segmentation may be better brought to bear on GAD problems. This paper presents work toward the development of just such a framework, implemented as a plug-in for the visual programming environment Grasshopper.
keywords	tool-building, design simulation, fabrication, computation, megalith
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

_id	sigradi2008_049
id	sigradi2008_049
authors	Benamy, Turkienicz ; Beck Mateus, Mayer Rosirene
year	2008
title	Computing And Manipulation In Design - A Pedagogical Experience Using Symmetry
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	The concept of symmetry has been usually restricted to bilateral symmetry, though in an extended sense it refers to any isometric transformation that maintains a certain shape invariant. Groups of operations such as translation, rotation, reflection and combinations of these originate patterns classified by modern mathematics as point groups, friezes and wallpapers (March and Steadman, 1974). This extended notion represents a tool for the recognition and reproduction of patterns, a primal aspect of the perception, comprehension and description of everything that we see. Another aspect of this process is the perception of shapes, primary and emergent. Primary shapes are the ones explicitly represented and emergent shapes are the ones implicit in the others (Gero and Yan, 1994). Some groups of shapes known as Semantic Shapes are especially meaningful in architecture, expressing visual features so as symmetry, rhythm, movement and balance. The extended understanding of the concept of symmetry might improve the development of cognitive abilities concerning the creation, recognition and meaning of forms and shapes, aspects of visual reasoning involved in the design process. This paper discusses the development of a pedagogical experience concerned with the application of the concept of symmetry in the creative generation of forms using computational tools and manipulation. The experience has been carried out since 1995 with 3rd year architectural design students. For the exploration of compositions based on symmetry operations with computational support we followed a method developed by Celani (2003) comprising the automatic generation and update of symmetry patterns using AutoCAD. The exercises with computational support were combined with other different exercises in each semester. The first approach combined the creation of two-dimensional patterns to their application and to their modeling into three-dimensions. The second approach combined the work with computational support with work with physical models and mirrors and the analysis of the created patterns. And the third approach combined the computational tasks with work with two-dimensional physical shapes and mirrors. The student’s work was analyzed under aspects such as Discretion/ Continuity –the creation of isolated groups of shapes or continuous overlapped patterns; Generation of Meta-Shapes –the emergence of new shapes from the geometrical relation between the generative shape and the structure of the symmetrical arrangement; Modes of Representation –the visual aspects of the generative shape such as color and shading; Visual Reasoning –the derivation of 3D compositions from 2D patterns by their progressive analysis and recognition; Conscious Interaction –the simultaneous creation and analysis of symmetry compositions, whether with computational support or with physical shapes and mirrors. The combined work with computational support and with physical models and mirrors enhanced the students understanding on the extended concept of symmetry. The conscious creation and analysis of the patterns also stimulated the student’s understanding over the different semantic possibilities involved in the exploration of forms and shapes in two or three dimensions. The method allowed the development of both syntactic and semantic aspects of visual reasoning, enhancing the students’ visual repertoire. This constitutes an important strategy in the building of the cognitive abilities used in the architectural design process.
keywords	Symmetry, Cognition, Computing, Visual reasoning, Design teaching
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ddss2008-33
id	ddss2008-33
authors	Charlton, James A.; Bob Giddings and Margaret Horne
year	2008
title	A survey of computer software for the urban designprocess
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Urban design is concerned with the shape, the surface and the physical arrangement of all kinds of urban elements, the basic components that make up the built environment, at the level of buildings, spaces and human activities. It is also concerned with the non-visual aspects of the environment, such as noise, wind and temperature and humidity. The city square is a particular urban element which can take many forms and its geometrical relationships such as maximum dimensions, ratio of width to length and building height to length have been analysed for centuries (Alberti 1475), (Vitruvius 1550), (Sitte 1889), (Corbett 2004). Within the current urban design process there are increasing examples of three dimensional computer representations which allow the user to experience a visual sense of the geometry of city squares in an urban landscape. Computer-aided design and Virtual Reality technologies have recently contributed to this visual assessment, but there have been limited attempts at 3D computer representations which allow the user to experience a greater sense of the urban space. This paper will describe a survey of computer tools which could support a more holistic approach to urban design and which could be used to simulate a number of urban texture and urban quality aspects. It will provide a systematic overview of currently available software that could support the simulation of building density, height, colour and style as well as conditions relating to noise, shading, heat, natural and artificial light. It will describe a methodology for the selection and filtering of appropriate computer applications and offer an initial evaluation of these tools for the analysis and representation of the three-dimensional geometry, urban texture and urban quality of city centre spaces. The paper is structured to include an introduction to the design criteria relating to city centre spaces which underpins this research. Next the systematic review of computer software will be described, and selected tools will undergo initial evaluation. Finally conclusions will be drawn and areas for future research identified.
keywords	Urban design, Software identification, 3D modelling, Pedestrian modelling, Wind modelling, Noise mapping, Thermal comfort, VR Engine
series	DDSS
last changed	2008/09/01 17:06

_id	4d32
id	4d32
authors	Christian Derix, Åsmund Gamlesæter, Pablo Miranda Carranza.
year	2008
title	3d Isovists and Spatial Sensations: two methods and a case study
source	EDRA 39th Annual Conference
summary	The development of the first Isovist in 3D, is the result of a collaboration between the Aedas CDR group and the New York based architecture office Davis Brody Bond, for the design of the Ground Zero Memorial Museum. The article introduces the design context that prompted the development of 3D Isovists, and discusses 2 basic methods and their variations developed as part of the research.
keywords	Isovist, spatial perception, user cognition, visibility graph analysis
series	other
type	normal paper
email
more	http://www.sfbtr8.uni-bremen.de/papers/SFB_TR%208%20Rep%20015-05_2008.pdf
last changed	2012/09/20 17:58

_id	ecaade2008_079
id	ecaade2008_079
authors	Hemmerling, Marco; Knaack, Ulrich; Schulz, Jens-Uwe
year	2008
title	Complexity in Digital Architectural Design
doi	https://doi.org/10.52842/conf.ecaade.2008.085
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 85-90
summary	The association of complexity and geometry was the starting point for an academic project at the chair of Computer Aided Design in Detmold. The students were asked to analyze a complex structure - taken from nature, art, technology or society - regarding the underlying geometrical rules and principles. The translation of these abstract geometric principles (logarithmic spiral, polyhedron, rotational solids, mesh-work, double helix…) into a three-dimensional structure was then realized in Rhinoceros. The 3D-modeling was followed by a transformation- and optimization-process of the initial shape by using the evolutionary principles of mutation and selection. The set-up for these variations followed predefined rules and principles for the manipulation of the original structure.
keywords	Geometry, Complexity, Computer Aided Design, Architecture
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ecaade2008_039
id	ecaade2008_039
authors	Indraprastha, Aswin; Shinozaki, Michihiko
year	2008
title	Constructing Virtual Urban Environment Using Game Technology
doi	https://doi.org/10.52842/conf.ecaade.2008.359
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 359-366
summary	Recent game technology ascends development of low-cost virtual environment to the next level in two domains : reality representation and user interaction or engagement. In architecture and urban design realm, realistic 3D representation become more important in such way of conceptualizing ideas and analyzing the context of design problem. This research will present development of virtual urban environment using game engine technology. Aim of this research is to promote game engine as a tool for visual representation, visual analysis and further basic tool for urban design study. At the end, we point out potentials as well as constraints both in technical and design method issues in game technology based on the research findings.
keywords	Game engine: virtual urban environment, design study, visual representation, visual analysis
series	eCAADe
email
last changed	2022/06/07 07:50

_id	caadria2008_17_session2a_143
id	caadria2008_17_session2a_143
authors	Kaewlai, Pornpis; Pinyo Jinuntuya, Pizzanu Kanongchaiyos
year	2008
title	Interactive Feasibility-based CAAD System for Infrastructure and Open Space Planning in Housing Project Design
doi	https://doi.org/10.52842/conf.caadria.2008.143
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 143-148
summary	The decision support system developed in this research is aimed to the conceptual scheme of project focusing on infrastructure planning and open space design in the architectural context for housing project. Alternative design sets are provided within the limitations, and possibilities to be further evaluated appropriately. This system helps architects and developers to analyze relationships of physical environment, architectural requirements and the overall of project-related factors with real-time cost estimation. Factors for cost estimation derived from the beginning to the end of project will be manipulated simultaneously. Architects and developers can use this design simulation to address the physical data with real-time cost estimation, provide alternative results, and design evaluation for overall project’s feasibility. The software of our research is not just a tool for design & planning automation in feasibility analysis. It will be an interactive decision support system for both developers and planners aspects. The system was developed by SketchUp Ruby Application Programming Interface. The results will be presented into two ways. Firstly, 2D and 3D modeling will be used for interactive visualization in design and planning of the beginning process. Subsequently, numbers and additional factors in details will be used to show relationship between architectural environment and feasibility-based information to help architects and developers collaboratively analyze the land use planning and open space design for housing project. In evaluation process, the developed software is tested with the project preceding and the future project of Bangkok area under constraints and regulations of Building Control Act of Thailand. In conclusion, this system will make effectiveness in design process and management of the construction knowledge. The decision support systems should be designed to makes explicit use of both planning analysis aspect and knowledge-based decision making.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2008_158
id	ecaade2008_158
authors	Kaga, Atsuko; Sugawara, Shihomi
year	2008
title	Research on the Visualization for Analyzing City Changes
doi	https://doi.org/10.52842/conf.ecaade.2008.939
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 939-944
summary	To perceive such changes of city space visually, a three-dimensional (3D) city space model is effective. The use of buildings in a city space is complex, reflecting the number of stories, and the number of stories in many cases. Furthermore, environmental parameters, such as opening a shop developed for conditions of the location, the existence of a building which is easy to divert to some other purpose, a managerial layer, and the whole country, is closely related to city change. A city change can be analyzed from various perspectives if such information can also be accumulated and displayed. If it is expressed in two dimensions, it will be restricted, but if expressed in 3D, the use situation of city space can be grasped quickly. Commercial 3D GIS software is useful for visualizing such a 3D city space model while referring to attribute information. However, such software is expensive and its use is restricted. For this study, highly extensible 3D modeling software is used to develop a technique for visualizing city spaces using its attribute information. Then the developed script is applied to an actual city model in Japan.
keywords	City Analysis, Urban design, 3D-model, City Visualization
series	eCAADe
email
last changed	2022/06/07 07:52

_id	caadria2008_32_session4a_263
id	caadria2008_32_session4a_263
authors	Kan, Jeff W.T.; John S Gero
year	2008
title	Do computer mediated tools affect team design creativity?
doi	https://doi.org/10.52842/conf.caadria.2008.263
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 263-270
summary	This paper presents the results of a quantitative analysis to measure the development of creative design ideas in design protocols. It presents a working definition of design creativity used in the analysis followed by the method of study. Five sets of video and audio data were collected from experiments that involved two designers designing similar tasks in three different settings: face-to-face, an Internet GroupBoard, and a 3D virtual world. The most creative pair was selected for qualitative and quantitative analysis. Our result shows that designers developed more design ideas in the face-to-face setting than in the 3D virtual world settings.
keywords	Creativity, protocol analysis, collaborations, virtual world
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	caadria2008_72_session7a_594
id	caadria2008_72_session7a_594
authors	Kosavinta, Satakhun
year	2008
title	Collaborative Financial Feasibility With CAAD For Residential Development
doi	https://doi.org/10.52842/conf.caadria.2008.594
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 594-600
summary	Computer Aided Architectural Design software is a necessary tool for the architectural design of a visible object or model. In residential development, an estimation of time/cost corresponding to the design is needed in order to complete its successful project. But available feasibility supporting tools usually lacks ability to share their information. To solve this limitation, this research proposes a design of Graphic User Interface (GUI) for collaborative financial feasibility through an architectural design process in housing project. The development of the GUI starts from collecting some information and requirement from National Housing Authority of Thailand. A heuristic decision making approach based on financial analysis are then designed for both design processes and feasibility processes of the project. Finally, design of the GUI is an integration of CAAD engines, design standards and financial feasibility analysis. Proposed GUI for collaborative financial feasibility is also tested and verified with some information from sample past projects of the National Housing Authority. From the experimental results, This GUI allows designers to improve the design of the project in real-time by inspecting the result of their design via the part of the architectural design-oriented GUI called myMonitoring and Scratch Pad. Together with planning, collaborative financial feasibility is focusing on the four main financial parameters which illustrated the possible chance of the project: Net Present Value (NPV), Benefit-Cost Ratio (B/C), Internal Rate of Return (IRR), and Payback Period. The core system was developed on Java Technology such as JSP and Swing empowered by 3D game engine. In addition, “Virtools” as an authoring tool was applied to improve interactive 3D virtual environment and explore rapid online system prototyping.
keywords	Collaborative: Financial Feasibility; CAAD; Residential Development; Virtual Reality (VR)
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	cf2011_p035
id	cf2011_p035
authors	Langenhan, Christoph; Weber Markus, Petzold Frank, Liwicki Marcus, Dengel Andreas
year	2011
title	Sketch-based Methods for Researching Building Layouts through the Semantic Fingerprint of Architecture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 85-102.
summary	The paper focuses on the early stages of the design process where the architect needs assistance in finding reference projects and describes different aspects of a concept for retrieving previous design solutions with similar layout characteristics. Such references are typically used to see how others have solved a similar architectural problem or simply for inspiration. Current electronic search methods use textual information rather than graphical information. The configuration of space and the relations between rooms are hard to represent using keywords, in fact transforming these spatial configurations into verbally expressed typologies tends to result in unclear and often imprecise descriptions of architecture. Nowadays, modern IT-technologies lead to fundamental changes during the process of designing buildings. Digital representations of architecture require suitable approaches to the storage, indexing and management of information as well as adequate retrieval methods. Traditionally planning information is represented in the form of floor plans, elevations, sections and textual descriptions. State of the art digital representations include renderings, computer aided design (CAD) and semantic information like Building Information Modelling (BIM) including 2D and 3D file formats such as Industry Foundation Classes (IFC) (IAI, 2010). In the paper, we examine the development of IT-technologies in the area of case-based reasoning (Richter et al., 2007) to provide a sketch-based submission and retrieval system for publishing and researching building layouts including their manipulation and subsequent use. The user interface focuses on specifying space and their relations by drawing them. This query style supports the spatial thinking approach that architects use, who often have a visual representation in mind without being able to provide an accurate description of the spatial configuration. The semantic fingerprint proposed by (Langenhan, 2008) is a description and query language for creating an index of floor plans to store meta-data about architecture, which can be used as signature for retrieving reference projects. The functional spaces, such as living room or kitchen and the relation among on another, are used to create a fingerprint. Furthermore, we propose a visual sketch-based interface (Weber et al., 2010) based on the Touch&Write paradigm (Liwicki et al., 2010) for the submission and the retrieval phase. During the submission process the architect is sketching the space-boundaries, space relations and functional coherence's. Using state of the art document analysis techniques, the architects are supported offering an automatic detection of room boundaries and their physical relations. During the retrieval the application will interpret the sketches of the architect and find reference projects based on a similarity based search utilizing the semantic fingerprint. By recommending reference projects, architects will be able to reuse collective experience which match the current requirements. The way of performing a search using a sketch as a query is a new way of thinking and working. The retrieval of 3D models based on a sketched shape are already realized in several domains. We already propose a step further, using the semantics of a spatial configuration. Observing the design process of buildings reveals that the initial design phase serves as the foundation for the quality of the later outcome. The sketch-based approach to access valuable information using the semantic fingerprint enables the user to digitally capture knowledge about architecture, to recover and reuse it in common-sense. Furthermore, automatically analysed fingerprints can put forward both commonly used as well as best practice projects. It will be possible to rate architecture according to the fingerprint of a building.
keywords	new media, case-based reasoning, ontology, semantic building design, sketch-based, knowledge management
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	8d4d
id	8d4d
authors	Leymarie F, Derix C, Miranda P, Coates P, Calderon C
year	2008
title	Medial Representations for driving the Architectural Creative Process
source	International Architecture Symposium, Barcelona, April 2008
summary	Medial representations of shape provide a powerful framework for the analysis and genesis of architectural forms,layouts, landscapes, cityscapes. In this paper we explore their potential use in driving the architectural creative process for 2D and 3D applications. We consider both the aspects of (i) the analysis of exisiting architectural layouts, and (ii) the genesis of novel ones. The archetypal medial representation of shape is the “medial axis” of Harry Blum (circa 1960). Boundary elements, the outline samples of the objects of interest, are used as the source of a wavefront propagation, for which the quenching points constitute axial symmetries. In 2D layout applications the resulting medial axis (MA) takes the form of a graph which unites geometry and topology of the objects and the field they occupy in one single framework. In the following we first survey the topic of shape representation via medial structures and consider their specific use in architectural analysis and genesis. We then report of early works in extending such ideas for novel applications relevant to architecture.
keywords	medial axis, spatial representation, user perception, occupancy
series	book
type	normal paper
email
last changed	2012/09/20 22:05

_id	ecaade2008_058
id	ecaade2008_058
authors	Niblock, Chantelle; Hanna, Raid
year	2008
title	An Investigation of the Influence of Using the Computer on Cognitive Design Actions:
doi	https://doi.org/10.52842/conf.ecaade.2008.693
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 693-700
summary	This paper documents a research pilot study; it is a comparative investigation between an expert designer and a novice designer. The study used protocol analysis to examine design cognitive actions whilst using 3D digital media during the conceptual stage of design. The empirical study found novice designers capable of managing a design process of complex objects due to the increase in their contribution of design strategies to the overall process. The possible reason for this may be due to using free-form modelling with accuracy aids found in computing facilities. This provides evidence to suggest automated computing should be encouraged within the pedagogical framework of architectural design.
keywords	Protocol Analysis, Design cognition, Complexity Management, Design Process
series	eCAADe
email
last changed	2022/06/07 07:58

_id	acadia08_134
id	acadia08_134
authors	Peters, Brady
year	2008
title	Copenhagen Elephant House: A Case Study of Digital Design Processes
doi	https://doi.org/10.52842/conf.acadia.2008.134
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 134-141
summary	This paper outlines the digital design processes involved in the design and construction of the new Elephant House at Copenhagen Zoo. Early design concepts for the canopy were tested using physical sketch models. The geometric complexity of these early physical models led to the involvement of the Specialist Modelling Group and the use of the computer to digitally sketch 3D CAD models. After many studies, the complex form of the canopies was rationalised using torus geometry. A computer program was written to generate the canopy glazing and structure. This parametric system was developed to be a design tool, and was developed by an architectural designer working with the team. Through its use the team were able to explore more design options, and alter the design farther along in the design process; however, this generative tool was created largely as a CAD efficiency tool. Another series of computer programs were written to generate and populate a shading system based on environmental analysis. Unlike the computer program that generated the structure and glazing, this program was not developed to make the generation of complex geometric structures more efficient, but developed to explore computational approaches that would have been impossible without the computer. Most of the canopy’s design was communicated to fabricator through a geometry method statement, a method that has been proven to be effective in the past. The project completed in June 2008.
keywords	Complex Geometry; Computation; Design; Generative; Sustainability
series	ACADIA
last changed	2022/06/07 08:00

_id	acadia11_152
id	acadia11_152
authors	Rael, Ronald; San Fratello, Virginia
year	2011
title	Developing Concrete Polymer Building Components for 3D Printing
doi	https://doi.org/10.52842/conf.acadia.2011.152
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 152-157
summary	The creation of building components that can be seen as sustainable, inexpensive, stronger, recyclable, customizable and perhaps even reparable to the environment is an urgent, and critical focus of architectural research. In the U.S. alone, the construction industry produced 143.5 million tons of building-related construction and demolition debris in 2008, and buildings, in their consumption of energy produce more greenhouse gasses than automobiles or industry.Because the inherent nature of 3D printing opens new possibilities for shaping materials, the process will reshape the way we think about architectural building components. Digital materiality, a term coined by Italian and Swiss architects Fabio Gramazio and Matthias Kohler, describes materiality increasingly enriched with digital characteristics where data, material, programming and construction are interwoven (Gramazio and Kohler, 2008). The research aspires towards this classification through the use of parametric modeling tools, analytic software and quantitative and qualitative analysis. Rapid prototyping, which is the automatic construction of physical objects using additive manufacturing technology, typically employs materials intended for the immediate analysis of form, scale, and tactility. Rarely do the materials used in this process have any long-term value, nor does the process - except in rare cases with expensive metal prototyping - have the ability to create actual and sustainable working products. This research intends to alter this state of affairs by developing methods for 3D printing using concrete for the production of long-lasting performance-based components.
series	ACADIA
type	work in progress
email
last changed	2022/06/07 08:00

_id	ijac20076102
id	ijac20076102
authors	Schein, Markus; Tessmann, Oliver
year	2008
title	Structural Analysis as Driver in Surface-Based Design Approaches
source	International Journal of Architectural Computing vol. 6 - no. 1, pp. 19-39
summary	This research argues for novel strategies to integrate structural analysis data in architectural design. Instead of a linear procedure of analysis, synthesis, evaluation and post-rationalization a synthesis/evaluation loop is installed which embeds structural analysis data as design driver from early on. The approach regards structural performance as one design criteria within a network of different requirements. An equilibrium of multiple parameters is aspired to instead of a single-parameter-optimum. The research is conducted via a custom-made digital interface between 3d modelling software and an application for structural analysis of space frames. The information exchange provides the basis for successive strategies within a collaborative design process of spatial roof structures: negotiation of an overall form and a multi-dimensional improvement of space frame topologies by a Genetic Algorithm (GA).
series	journal
last changed	2008/06/18 08:12

_id	sigradi2008_186
id	sigradi2008_186
authors	Spallone, Roberta
year	2008
title	Questions of graphic standardization in the teaching of Computer Aided Architectural Drawing
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	In this paper I want to present some considerations about graphic standards applied to CAD drawing and object of teaching in I Faculty of Architecture of Polytechnic of Turin. They concern both the specific formats of CAD’s software (as the layers, the file naming…) and the relationship between Italian and European Graphic Standards (UNI and ISO) and CAD systems of representation about the line thicknesses, the text styles and dimensions, the scales, the material renditions… Aim of the research is to introduce the students of the first year of Architecture to the problems of drawing standards applied to the architectural design. With regard to layer standards were analyzed in particular the “AIA CAD Layer Guidelines” related to the “University of Kansas Layer Standard”. Starting from these two sources I have synthesized the format of an architectural scale drawing (1:200-1:50) in a limited number of layers, useful for beginners both in architecture and in CAD. With regard, for example, to material renditions, were compared the “Basic conventions for representing areas on cuts and sections”, proposed by UNI ISO, with the hatches offered by software, and were selected and customized the most useful in architectural drawing. The results of this work, partial and continuously updated, consist of a series of proposals oriented to optimize the students’ method of CAD drawing, complying with the existent graphic standards.
keywords	Graphic standards, Teaching, Architectural design drawing
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	5d77
id	5d77
authors	Adriane Borda; Neusa Félix; Janice de Freitas Pires; Noélia de Moraes Aguirre.
year	2008
title	MODELAGEM GEOMÉTRICA NOS ESTÁGIOS INICIAIS DE APRENDIZAGEM DA PRÁTICA PROJETUAL EM ARQUITETURA. GEOMETRIC MODELING IN THE EARLY STAGES OF LEARNING PRACTICE ARCHITECTURAL DESIGN.
source	12th Iberoamerican Congress of Digital Graphics, SIGRADI, 2008, Havana. SIGRADI, Proceedings of the 12th Iberoamerican Congress of Digital Graphics.. Havana : Ministerio de Educacion Superior, 2008. p. 434-438.
summary	This work invests on delimitation of a Geometric Modeling study program directed to students at the initial stages of Architecture. It is considered that the studies promote a qualified control of the form based on recognition of parameters which define it, moreover it also allows the enlargement of the students geometric vocabulary, important to the architectural design activities. In this way, the program advances on the appropriation of new concepts which surround the investigations on architectural design processes, such as the concept of shape grammar. Observing analysis and architectural composition practices based on such concept, contents of geometric modeling which are already being used in the context of post-graduation are identified to be transposed to the graduation context, along with the initial teaching practices of architectural design. The results refer to making the didactic material available, these materials have the objective of building references for the development of design practice which explore the reflection about the processes of creation and composition of architectural form in their geometric aspects.
keywords	Architecture, Geometric Modeling, Shape grammar, Teaching/Learning
series	SIGRADI
type	normal paper
email
last changed	2016/03/10 09:47

_id	acadia08_066
id	acadia08_066
authors	Ahlquist, Sean; Moritz Fleischmann
year	2008
title	Material & Space: Synthesis Strategies based on Evolutionary Developmental Biology
doi	https://doi.org/10.52842/conf.acadia.2008.066
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 66-71
summary	A material system can be defined as a set of self-organized materials, defining a certain spatial arrangement. In architecture, this material arrangement acts as a threshold for space, though space often only appears as a by-product of the material organization. Treating space as a resulting, therefore secondary, independent product minimizes the capacity to generate architecture that is astutely aware of concerns of functionality, environment and energy. An effective arrangement of material can only be determined in relation to the spaces that it defines. When proposing a more critical approach, a material system can be seen as an intimate inter-connection and reciprocal exchange between the material construct and the spatial conditions. It is necessary to re-define material system as a system that coevolves spatial and material configurations through analysis of the resultant whole, in a process of integration and evaluation. ¶ With this understanding of material system comes an expansion in the number of criteria that are simultaneously engaged in the evolution of the design. The material characteristics, as well as the spatial components and forces (external and internal), are pressures onto the arrangement of material and space. ¶ This brings a high degree of complexity to the process. Biological systems are built on methods that resolve complex interactions through sets of simple yet extensible rules. Evolutionary Developmental Biology explains how growth is an interconnected process of external forces registering fitness into a fixed catalogue of morphological genetic tools. Translating the specific framework for biological growth into computational processes, allows the pursuit of an architecture that is fully informed by the interaction of space and material.
keywords	Biology; Computation; Material; Parametric; System
series	ACADIA
last changed	2022/06/07 07:54

For more results click below: