Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 490

Reformat results as: short short into frame detailed detailed into frame

_id	ddss2008-25
id	ddss2008-25
authors	Antoni, Jean-Philippe; P. Frankhauser, C. Tannier, S. Youssoufi
year	2008
title	Simulating and assessing prospective scenariosA comparative approach in urban planning
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	The first part of the paper is centred on the phenomena of urban growth, in order to set the rules for a sustainable scenario of urban development. Then we enter the core of the paper that is the comparison of models. For each of the three compared models, we describe its main theoretical characteristics, the chosen parameters, and the obtained results. In section 6, heterogeneity of the produced results is discussed, and we highlight the points of interest and the lacks of the three models. Here we show that results we obtained feed debates about urban growth management. Finally, concluding remarks at the end of the paper address the general topic of the evaluation of the quality of simulation results.
keywords	Urban sprawl, sustainable development, fractals, cellular automata, spatial interaction models
series	DDSS
last changed	2008/09/01 17:06

_id	acadia08_072
id	acadia08_072
authors	Frumar, Jerome
year	2008
title	An Energy Centric Approach to Architecture: Abstracting the material to co-rationalize design and performance
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 72-81
doi	https://doi.org/10.52842/conf.acadia.2008.072
summary	This paper begins by exploring matter as an aggregated system of energy transactions and modulations. With this in mind, it examines the notion of energy driven form finding as a design methodology that can simultaneously negotiate physical, environmental and fabrication considerations. The digital workspace enables this notion of form finding to re-establish itself in the world of architecture through a range of analytic tools that algorithmically encode real world physics. Simulating the spatial and energetic characteristics of reality enables virtual “form generation models that recognize the laws of physics and are able to create ‘minimum’ surfaces for compression, bending [and] tension” (Cook 2004). The language of energy, common in engineering and materials science, enables a renewed trans-disciplinary dialogue that addresses significant historic disjunctions such as the professional divide between architects and engineers. Design becomes a science of exploring abstracted energy states to discover a suitable resonance with which to tune the built environment. ¶ A case study of one particular method of energy driven form finding is presented. Bi-directional Evolutionary Structural Optimization (BESO) is a generative engineering technique developed at RMIT University. It appropriates natural growth strategies to determine optimum forms that respond to structural criteria by reorganizing their topology. This dynamic topology response enables structural optimization to become an integrated component of design exploration. A sequence of investigations illustrates the flexibility and trans-disciplinary benefits of this approach. Using BESO as a tool for design rather than purely for structural optimization fuses the creative approach of the architect with the pragmatic approach of the engineer, enabling outcomes that neither profession could develop in isolation. The BESO case study alludes to future design processes that will facilitate a coherent unfolding of design logic comparable to morphogenesis.
keywords	Energy; Form-Finding; Morphogenesis; Optimization; Structure
series	ACADIA
last changed	2022/06/07 07:50

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cdc2008_129
id	cdc2008_129
authors	Breen, Jack and Julian Breen
year	2008
title	The Medium Is the Matter: Critical Observations and Strategic Perspectives at Half-time
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 129-136
summary	This paper critically re-views the professional impact and functionality of the pervasive digital ‘matter’ we have come to believe we can no longer do without. On the basis of a playful exploration of the first ‘half-century’ of our digital age, an attempt is made to draw new perspectives for the next ’level’ of our digital culture in a broader (multi)media perspective and more specifically: the domains of Architecture. To stimulate an open-minded ‘second-half’ debate, the paper puts forward some potentially promising (and hopefully provocative) conceptions and strategies for imaginative interface applications and game-based architectural study initiatives. Furthermore, the paper proposes the establishment of a new cultural platform for the exchange of Critical Digital hypotheses and the evolvement of visionary design concepts through creative digital innovation, with the (inter)active involvement of older and younger team-players…
email
last changed	2009/01/07 08:05

_id	ddss2008-33
id	ddss2008-33
authors	Charlton, James A.; Bob Giddings and Margaret Horne
year	2008
title	A survey of computer software for the urban designprocess
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Urban design is concerned with the shape, the surface and the physical arrangement of all kinds of urban elements, the basic components that make up the built environment, at the level of buildings, spaces and human activities. It is also concerned with the non-visual aspects of the environment, such as noise, wind and temperature and humidity. The city square is a particular urban element which can take many forms and its geometrical relationships such as maximum dimensions, ratio of width to length and building height to length have been analysed for centuries (Alberti 1475), (Vitruvius 1550), (Sitte 1889), (Corbett 2004). Within the current urban design process there are increasing examples of three dimensional computer representations which allow the user to experience a visual sense of the geometry of city squares in an urban landscape. Computer-aided design and Virtual Reality technologies have recently contributed to this visual assessment, but there have been limited attempts at 3D computer representations which allow the user to experience a greater sense of the urban space. This paper will describe a survey of computer tools which could support a more holistic approach to urban design and which could be used to simulate a number of urban texture and urban quality aspects. It will provide a systematic overview of currently available software that could support the simulation of building density, height, colour and style as well as conditions relating to noise, shading, heat, natural and artificial light. It will describe a methodology for the selection and filtering of appropriate computer applications and offer an initial evaluation of these tools for the analysis and representation of the three-dimensional geometry, urban texture and urban quality of city centre spaces. The paper is structured to include an introduction to the design criteria relating to city centre spaces which underpins this research. Next the systematic review of computer software will be described, and selected tools will undergo initial evaluation. Finally conclusions will be drawn and areas for future research identified.
keywords	Urban design, Software identification, 3D modelling, Pedestrian modelling, Wind modelling, Noise mapping, Thermal comfort, VR Engine
series	DDSS
last changed	2008/09/01 17:06

_id	69d2
id	69d2
authors	Derix, Christian
year	2008
title	Genetically Modified Space: Evolutionary Design in Practice
source	In David Littlefield (ed), ‘Space Craft: Advanced in Architectural Computing’, RIBA publications, March 2008
summary	Genetically Modified Spaces discusses three projects implementing three different evolutionary algorithms and types of selection processes, to evolve spatial configurations for buildings and masterplans. The level of participation by the user varies from observation to collaboration in directing the search of the design space.
keywords	evolutionary architecture, genetic algorithms, space planning, emergence
series	book
type	normal paper
email
more	http://www.ribabookshops.com/item/space-craft-developments-in-architectural-computing/63560/
last changed	2012/09/20 18:09

_id	ecaade2008_086
id	ecaade2008_086
authors	Elsen, Catherine; Juchmes, Roland; Kubicki, Sylvain; Leclercq, Pierre
year	2008
title	DCDS – Distant Collaborative Design Studio
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 325-332
doi	https://doi.org/10.52842/conf.ecaade.2008.325
summary	This paper introduces new supporting tools in the field of distant collaborative design, namely DCDS and CRTI-weB. These prototypes respectively support: the early stages of design, through the support of the crucial initial step of free-hand sketches shared in real-time, and the asynchronous collaborative activities. The main goal of this paper is to propose the use of these innovative tools as an efficient and realistic way of managing long distance collaboration, to effectively serve the designers’ needs. This proposition is analyzed and addressed through a real-size experiment featuring 30 architecture and architectural-engineering students, working together in real-time at different locations (Belgium and France). This experiment and the necessary survey open up interesting fields of investigation, such as the relevance of the proposed services in supporting distant collaborative design in architecture and the benefit this represents for students to merge the IT aspects and the design studio. The methodology and the replicability are analyzed to increase the level and quality of formation of our students and, finally, a criticism of the tools confirms a benefit for the developing teams.
keywords	Distant collaborative design, sketch support systems, asynchronous collaborative activities
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2008_184
id	ecaade2008_184
authors	Fricker, Pia; Hovestadt, Ludger; Braach, Markus; Dillenburger, Benjamin; Fritz, Oliver; Rüdenauer, Kai; Lemmerzahl, Steffen
year	2008
title	Form Follows Structure?
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 451-458
doi	https://doi.org/10.52842/conf.ecaade.2008.451
summary	This paper can be viewed as the continued development of a research project presented at last year’s eCAADe. The project focused on the potential and possibilities of cooperation among architects, investors with concrete building projects, and researchers at the university level working on generative design and parametric construction. After having spent several years of research on design techniques in a purely academic setting at the university we see, contrary to our fears, that reality and the integration of concrete factors such as budget, time management, etc. does not diminish but rather improves the quality of our work. This work is not primarily concerned with the development of a new architectural language but the intelligent use of modern computer technology based on digitized planning processes defined as ‘complex building design’. Designs developed in this manner can be distinguished by certain characteristics, the evaluation of which is a point critically discussed in the following paper.
keywords	Generative Design, Collaborative Design, Parametric Design, User Participation in Design, Case Study, Strategic Design
series	eCAADe
email
last changed	2022/06/07 07:50

_id	82b1
id	82b1
authors	Greenwood D, Horne M, Thompson E M, Allwood C M, Wernemyr C, Westerdahl B.
year	2008
title	Strategic Perspectives of the Use of Virtual Reality within the Building Industries of Four Countries.
source	International Journal of Architectural Engineering and Design Management
summary	This paper presents results from the first stage of an analysis of the use of virtual reality (VR) within the building industries of strategically selected countries, namely, China, Sweden, the UK and the US. The aims of the research are to assess VR usage and its benefits within the building industries of these countries and to identify perceived barriers to VR usage and ways of overcoming them. The countries selected offer a range of experience in the adoption of VR technologies and the paper provides an initial analysis of developments at an international level. Semi-structured interviews were conducted with senior professionals from each of six leading construction companies within each country. The findings included the rationale for the adoption of VR and the barriers to doing so, as well as some divergence between the respondents in their working definition of what visualization and, specifically, VR actually represents.
keywords	Building industry; implementation strategy;international perspectives; interview survey; virtual reality
series	other
type	normal paper
email
last changed	2008/11/26 16:54

_id	ecaade2008_048
id	ecaade2008_048
authors	Gün, Onur Yüce
year	2008
title	Anti UV: Progressive Component Design in Cross Platforms
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 69-76
doi	https://doi.org/10.52842/conf.ecaade.2008.069
summary	The executive power of computation, once utilized to inform the discrete pieces of design, ‘component making’ rapidly became one of the trends in architectural design. Idea of components conceptually transformed the enclosing forms of architecture into subdivision surfaces that act as fields for components to aggregate on. While a certain level of variety is achieved via manipulation of components, the characteristics of the surfaces become overlooked via common use of parametric (UV) subdivision. This paper, with a critical look at the current component field generation techniques, focuses on alternative methods of transforming a surface into a digital ground for component aggregation. Series of studies address and deal with various pitfalls of component design and application on software-dictated UV subdivision surfaces.
keywords	Computation, Components, Emergent, Generative, Progressive
series	eCAADe
email
last changed	2022/06/07 07:49

_id	acadia08_458
id	acadia08_458
authors	Hemsath, Timothy; Robert Williams; Ronald Bonnstetter; Leen-Kiat Soh
year	2008
title	Digital CADCAM Pedagogy Model: Intelligent Inquiry Education
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 458-463
doi	https://doi.org/10.52842/conf.acadia.2008.458
summary	Prototype manufacturing as an educational tool has been very successful at the college level in architecture and engineering design. This paper discusses an innovative inquiry-based learning approach rather than the problem-based learning models commonly utilized by other similar programs. For example, several research-funded technology projects (e.g., Cappelleri et al. 2007) look at involving students in problem-based learning exercises (e.g., building robots); however, these exercises (while providing valuable experiences) have predetermined outcomes ingrained by the teachers, the project structure, and the components used to construct the devices. Therefore, inquisitive and creative problem solving is limited to the “kit-of-parts” in their approach to solving the problem. The inquiry-based CADCAM pedagogy model is more concerned with the process of solving a problem through the vehicle of prototyping than with the specificity of the design project itself. This approach has great potential. First, the need to solve the problem drives learning on multiple levels, integrating interdisciplinary ideas into the problem and solution. Second, the problem interlocks disciplines through inquiry knowledge building in team exercises. Finally, it encourages diversity and flexibility by allowing students to look at problems from multiples perspectives and points of view.
keywords	CAD; Education; Evaluation; Pedagogy; Rapid Prototyping
series	ACADIA
last changed	2022/06/07 07:49

_id	ddss2008-31
id	ddss2008-31
authors	Heurkens, Erwin W.T.M.
year	2008
title	The Urban Decision RoomApplication and Evaluation of an Urban Management Instrument
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	The Urban Decision Room (UDR) should be placed in the tradition of urban design and planning discipline that is taught, and into which research is carried out, at the Faculty of Architecture at the Delft University of Technology. The UDR was developed at the faculty as one of the new design and planning methods with its own specific features. The UDR is specifically aimed at decision-making processes in the practice of urban planning, and particularly at complex urban area development projects. The background to the design enables the UDR to support planning decisions that are made at urban planning element level. The participants in the interactive UDR sessions are asked to provide concrete solutions for urban planning design problems (in terms of preferences for particular functions, number of plots, etc.) and to enter them in a simulation model. A computer network is then used to calculate the common solution space of all the proposals, which is then projected onto a central screen. This outcome generally provides the basis for further discussions and negotiations, after which another round as described above can be held. The paper first focuses on the background and the main features of the UDR system. Secondly, the decision-making issue and a description of a specific Urban Decision Room model, the UDR Heijsehaven will be explained. Thirdly the structure of, and the experiences from, the experimental sessions with the Urban Decision Room Heijsehaven are described. After that the results of the evaluation of the UDR system by participants is presented and finally the follow-up assignment for the UDR system is carried out.
keywords	Urban Decision Room, UDR Heijsehaven, Urban Renewal Project, Urban Planning, Urban Management Instrument, Common Solution Space, Decision Support System
series	DDSS
last changed	2008/09/01 17:06

_id	ecaade2008_039
id	ecaade2008_039
authors	Indraprastha, Aswin; Shinozaki, Michihiko
year	2008
title	Constructing Virtual Urban Environment Using Game Technology
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 359-366
doi	https://doi.org/10.52842/conf.ecaade.2008.359
summary	Recent game technology ascends development of low-cost virtual environment to the next level in two domains : reality representation and user interaction or engagement. In architecture and urban design realm, realistic 3D representation become more important in such way of conceptualizing ideas and analyzing the context of design problem. This research will present development of virtual urban environment using game engine technology. Aim of this research is to promote game engine as a tool for visual representation, visual analysis and further basic tool for urban design study. At the end, we point out potentials as well as constraints both in technical and design method issues in game technology based on the research findings.
keywords	Game engine: virtual urban environment, design study, visual representation, visual analysis
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ddss2008-22
id	ddss2008-22
authors	Keim, Christian
year	2008
title	Modelling urban dynamics through cellular automata: an empirical application
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Actual developments of digital maps and tools given by GIS-systems provide the possibility to develop new methodologies to handle land-cover data for modelling purposes. At any rate empirical applications are still rare within the Geosimulation studies and yet there is not an established methodology. The aim of the work has been to construct a cellular automata (CA) model of a sprawling city region within the German context, based on empirical data. The urban land-use classes (LUC) are considered as a higher organisation level of different building typologies and relative functions. These define the land-use patterns as self-organized from their complex spatial iterations, based on limited local information exchange. On the one hand the synthesis capacity of the CA models has been verified, even without socio-economical variables. On the other hand, it has been seen that the still early evolutional state of digital land-cover datasets are too premature to fully suite the modelling purposes.
keywords	Complex Systems, Self-Organisation, Cellular automata, Geographical information systems, Land-use change
series	DDSS
last changed	2008/09/01 17:06

_id	acadia08_192
id	acadia08_192
authors	Lee, Charles
year	2008
title	The Thermal Organism And Architecture
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 192-199
doi	https://doi.org/10.52842/conf.acadia.2008.192
summary	Throughout the history of architectural discourse the concept of metabolic function in a building and a buildings relationship to its creators is expressed by keen designers who understand the subtle linkage. Organistic homeostasis is a biological function found in all mammals including humans. The interior generation of heat classifies man as endothermic. Endothermic heat generation allows for a very controlled equilibrium and is a characteristic of more complex organisms. The body has produced highly evolved surface systems to help efficiently manage the flow of heat energy in and out of the body. I suggest building envelopes represent the human being projecting itself outwards in a prosthetic extension of the skin. Inherent in this projection are the same demands of envelope put forth in the body. In my research of anatomy I have found one system that has evolved to help facilitate endothermic heat regulation in mammals at the skin level, which is hair. How does hair transcribe into architecture? An analysis into the function of hair and its adaptable morphologies is studied. Hair is a thermal regulating system, its building equivalent are forms of thermal insulation and radiant barriers. Hairs goal is homeostatic equilibrium which has its architectural counterpoint known as the balance point. Hair is an adjustable system that mitigates between internal and external heat loading which is the goal of a building envelope. In conclusion the paper explores these issues and more in new building systems and design tactics that originate from the function of hair.
keywords	Biology; Biomimetics; Design; Environment; Responsive
series	ACADIA
last changed	2022/06/07 07:51

_id	ddss2008-40
id	ddss2008-40
authors	Marin, Ph.; J.C. Bignon, H. Lequay
year	2008
title	Integral evolutionary design, integrated to early stageof architectural design processGenerative exploration of architectural envelope responding tosolar passive qualities
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper tackles the exploration of generative digital tools in the field of architectural design. Evolutionary mechanisms are expected to help the designer and to support his creativity. Our purpose is to implement a digital tool based on a genetic algorithm, which uses environmental parameters and human interplay to evolve an architectural form. The analysis of design processes and CAD use lead us to mark a transformation of design process at a cognitive level.
keywords	Genetic algorithm, generative architectural design process, environmental parameters
series	DDSS
last changed	2008/09/01 17:06

_id	martens02_paper_eaea2007
id	martens02_paper_eaea2007
authors	Martens, Bob
year	2008
title	Endoscopy Without Endoscopes: Alternatives for Gaining Shared-In-Sights at an Eye-Level
source	Proceedings of the 8th European Architectural Endoscopy Association Conference
summary	This contribution is an attempt to explain the evolution of endoscopy in design and planning. While in early uses of endoscopy aspects of handling the instrument used to be at the centre of attention, they have come to be replaced by the notion of gaining deliberate insights into architectural or urban planning models. Does that mean endoscopy without an endoscope? In the following it will be shown that insights can be gained even without the use of an endoscopic device, provided the process of observation is consciously analysed. The focus lies on the perspective of the end-user. This observation is illustrated by the case study on Dehnepark in Vienna and sustained by the research activities accompanying the design process.
keywords	design process, environmental psychology, end-user perspective, UNA (User Need Analysis), Dehnepark, Vienna
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

_id	caadria2008_23_session3a_185
id	caadria2008_23_session3a_185
authors	Merrick, Kathryn; Mary Lou Maher, Rob Saunders
year	2008
title	Achieving adaptable behaviour in intelligent rooms using curious supervised learning agents
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 185-192
doi	https://doi.org/10.52842/conf.caadria.2008.185
summary	Multiple devices, both hardware and software, may come and go at any time in a given room. Software controlling the behaviour of these devices must be able to adapt to encompass new devices or the removal of existing devices. This paper presents a model for curious, supervised learning agents that address the issue of adaptability at a behavioural level in an intelligent room. Curious, supervised learning agents comprise a curiosity module and a supervised learning algorithm. The curiosity module identifies interesting devices on which to focus the agent’s learning. The supervised learning component realises behaviours by observing, modelling and mimicking human actions. Our framework is demonstrated in a virtual meeting room in Second Life. We show that the curious learning agent can adapt its behaviour to identify new learning goals in response to new devices and activities.
keywords	Curiosity, Supervised learning, Agent, Intelligent room
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	caadria2008_54_session5b_445
id	caadria2008_54_session5b_445
authors	Rafi, Ahmad; Mastura Yunan, Mazlan Mahadzir, Abdul Halim
year	2008
title	Virtual reality as a design education: A Malaysian experience
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 445-451
doi	https://doi.org/10.52842/conf.caadria.2008.445
summary	This paper presents our attempts on virtual reality curriculum development for the past four years as one of the multimedia-based degrees. It will give an overview, goals and outcomes of the virtual reality (VR) curriculum with varieties of virtual reality systems, interactions and design theories used at different level of studies. It also highlights issues related to designing virtual spaces and the approach used to suggest a good storytelling. This paper will also explore, report and demonstrate the use of non-immersive virtual reality system based on a study in a problem-based learning environment of a virtual reality majoring. Following early encouraging first round results this paper concludes that experiential design could be one of the effective approaches for a problem-based learning and richer content creation of virtual environment (VE) design. It also suggests that the presence of motions, different field of views, interactivities and stereoscopic visions are attributes of three-dimensional (3D) visualization that contribute to better understanding and designing virtual environments.
keywords	Virtual reality; design education; problem-based learning; virtual environment
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ddss2008-28
id	ddss2008-28
authors	Rügemer, Jörg
year	2008
title	Pimp my Box – Architecture of TransformationInterdisciplinary Collaboration and Various Media as DesignDecision and Support Tools
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	The paper describes an interdisciplinary architectural design studio setting at the graduate level, which explores the notion of “transformation” in architecture. By collaborating with a group of modern dance students, the studio approaches the creation of space from a different perspective, using dynamic movement coupled with digital tools as a space generator.
keywords	Transformation of Space, Dynamic Space, Hybrid Design Method, Interdisciplinary Studio Approach
series	DDSS
last changed	2008/09/01 17:06

For more results click below: