Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 414

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2008_180
id	sigradi2008_180
authors	Vincent, Charles
year	2008
title	Gulliver in the land of Generative Design
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	The current trend in architectural design towards architectural computing has been treated both from a philosophical standing point and as an operational systems’ problem, in a quest for explications which could at last break ground for a more broad development and adoption of design tools. As Kostas Terzidis (2007) puts it, the intuitiveness that architects have put on so high a pedestal seems to be the central issue to be dealt with by both views. There seems to be no apparent shortcut toward the reconciliation between traditional practice and new media and most certainly it is not only a problem of interface design, but one of design method clarification and reinterpretation of those methods into computing systems. Furthermore, there’s no doubt left as to whether computing systems can generate such new patterns as to impact our own understanding of architecture. But even if computer algorithms can make possible the exploration of abstract alternatives to an abstract initial idea, as in Mathematica and Processing, the issue of relating abstract and geometric representations of human centered architecture lays in the hands of architects, programmers or, better yet, architect-programmers. What seems now to be the relevant change is that architectural design might escape from the traditional sequence embedded in the need – program – design iterations – solution timeline, substituted by a web of interactions among differing experimental paths, in which even the identification of needs is to be informed by computing. It is interesting to note that the computational approach to architectural design has been praised for the formal fluidity of bubbles and Bezier shapes it entails and for the overcoming of functionalist and serialization typical of modern architecture. That approach betrays a high degree of canonic fascination with the tools of the trade and very little connection to the day to day chores of building design. On the other hand, shall our new tools and toys open up new ways of thinking and designing our built landscape? What educational issues surface if we are to foster wider use of the existing technologies and simultaneously address the need to overtake mass construction? Is mass customization the answer for the dead end modern architecture has led us to? Can we let go the humanist approach begun in Renascence and culminated in Modernism or shall we review that approach in view of algorithmic architecture? Let us step back in time to 1726 when Swift’s ‘Travels into Several Remote Nations of the World by Lemuel Gulliver’ was first published. In Swift’s fierce critic of what seemed to him the most outrageous ideas, he conceived a strange machine devised to automatically write books and poetry, in much the same generative fashion that now, three centuries later, we begin to cherish. “Every one knew how laborious the usual method is of attaining to arts and sciences; whereas by his contrivance, the most ignorant person at a reasonable charge, and with a little bodily labour, may write books in philosophy, poetry, politicks, law, mathematics and theology, without the least assistance from genius or study. He then led me to the frame, about the sides whereof all his pupils stood in ranks. It was twenty foot square, placed in the middle of the room. The superficies was composed of several bits of wood, about the bigness of a dye, but some larger than others. They were all linked together by slender wires. These bits of wood were covered on every square with paper pasted on them; and, on these papers were written all the words of their language in their several moods, tenses, and declensions, but without any order. The professor then desired me to observe, for he was going to set his engine at work. The pupils at his command took each of them hold of an iron handle, whereof there were forty fixed round the edges of the frame; and giving them a sudden turn, the whole disposition of words was entirely changed. He then commanded six and thirty of the lads to read the several lines softly as they appeared upon the frame; and where they found three or four words together that might make part of a sentence, they dictated to the four remaining boys who were scribes. This work was repeated three or four times, and at every turn the engine was so contrived, that the words shifted into new places, as the square bits of wood moved upside down.” (Jonathan Swift, Gulliver’s Travels, A Voyage to Balnibarbi) What astonishing forecast did Swift show in that narrative that, in spite of the underlying incredulity and irony, still clarifies our surprise when faced to what might seem to some of us just an abandonment of all that architects and designers have cherished: creativeness and inventiveness. Yet, we could argue that such a radical shift in paradigm occurred once when master builders left the construction ground and took seat at drafting boards. The whole body of design and construction knowledge was split into what now seem to us just specialties undertaken by more and more isolated professionals. That shift entailed new forms of representation and prediction which now each and all architects take for granted. Also, Cartesian space representation turned out to be the main instrument for professional practice, even if one can argue that it is not more than the unfolding of stone carving techniques that master builders and guilds were so fond of. Enter computing and all its unfolding, i.e. DNA coding, fractal geometry, generative computing, nonlinear dynamics, pattern generation and cellular automata, as a whole new chapter in science, and compare that to conical perspective, descriptive and analytical geometry and calculus, and an image begins to form, delineating a separation between architect and digital designer. In previous works, we have tried approaching the issues regarding architects education in a more consensual way. But it seems now that the whole curricular corpus might be changed as well. The very foundations upon which we prepare future professionals shall change, not only in College, but in High School as well. In this paper, we delve further into the disconnect between current curricula and digital design practices and suggest new disciplinary grounds for a new architectural education.
keywords	Educational paradigm; Design teaching; Design methods;
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	acadia08_390
id	acadia08_390
authors	Vrana, Andrew; Joe Meppelink; Ben Nicholson
year	2008
title	New Harmony Grotto
doi	https://doi.org/10.52842/conf.acadia.2008.390
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 390-399
summary	With the expanding wave of contemporary architecture inspired and informed by biomorphic design and biomimetic processes, the re-evaluation of work of Frederick Kiesler has become immanent. Throughout the mid 20th century he became increasingly interested in the relationship of natural form and structure to architectural space and organization. The Grotto for Meditation proposed in 1963 for New Harmony, Indiana commissioned by Mrs. Jane Blaffer-Owen was the culmination of his life’s work. Though the project was not realized, it embodies all of the influences of his time from surrealism to biology and cybernetic theory. Through our university and the Blaffer Foundation, we engaged in formal research and tectonic resolution of the project employing digital modeling and fabrication technologies at our College and in Houston where Mrs. Owen lives when she is not in New Harmony. We based this project on the full catalog of archival material made available to us with support from the Blaffer and Kielser Foundations. Our exploration also was influenced by discussions with Mrs. Blaffer-Owen who is still very interested in realizing this profoundly interesting and enigmatic project. Our university has opened the door to the opportunity that our reinterpreted Grotto become a permanent fixture on the campus next to a wetland landscape that it is currently under construction. Our research into Kiesler has engaged his esoteric concepts of “co-realism” and “continuous tension” as well as his early use of recursive geometry and biomorphic form in design. From reverse engineering and digital fabrication via 3D scanning to generative structural articulation, we are experimenting with a structural/spatial system that closely aligns with Kiesler’s originally proposed tile patterning dilated into a minimal structure. Our prototypes and the final version will be fabricated by one of the largest commercially for-hire water jet cutter in country and assembled on the site.
keywords	Biomorphic; Digital Fabrication; Prototype; Structure
series	ACADIA
last changed	2022/06/07 07:58

_id	caadria2008_9_session1b_075
id	caadria2008_9_session1b_075
authors	Chien, Sheng-Fen
year	2008
title	Probing elders’ needs for smart technologies in the domestic environment
doi	https://doi.org/10.52842/conf.caadria.2008.075
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 75-80
summary	This paper presents an initial investigation into developing smart homes for the elderly. Smart homes refer to domestic living environments that equipped with “sensible” and “responsive” facilities, which employ smart technologies, to provide occupants a sound and comfortable living. Designers and sociologists have observed reluctances and even rejections to these technologies from the elderly. A Cultural Probes study shows that the elderly welcome new technologies but reject robotic companionships. In addition, a questionnaire survey concludes that smart technologies for home safety and security, energy conservation and usage monitoring, as well as health care and maintenance, are desirable.
keywords	Smart home; the elderly; cultural probe; questionnaire; survey
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaade2015_265
id	ecaade2015_265
authors	Hosey, Shannon; Beorkrem, Christopher, Damiano, Ashley, Lopez, Rafael and McCall, Marlena
year	2015
title	Digital Design for Disassembly
doi	https://doi.org/10.52842/conf.ecaade.2015.2.371
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 371-382
wos	WOS:000372316000043
summary	The construction and building sector is now widely known to be one of the biggest energy consumers, carbon emitters, and creators of waste. Some architectural agendas for sustainability focus on energy efficiency of buildings that minimize their energy intake during their lifetime - through the use of more efficient mechanical systems or more insulative wall systems. One issue with these sustainability models is that they often ignore the hierarchy of energy within architectural design. The focus on the efficiency is but one aspect or system of the building assembly, when compared to the effectiveness of the whole, which often leads to ad-hoc ecology and results in the all too familiar “law of unintended consequences” (Merton, 1936). As soon as adhesive is used to connect two materials, a piece of trash is created. If designers treat material as energy, and want to use energy responsibly, they can prolong the lifetime of building material by designing for disassembly. By changing the nature of the physical relationship between materials, buildings can be reconfigured and repurposed all the while keeping materials out of a landfill. The use of smart joinery to create building assemblies which can be disassembled, has a milieu of new possibilities created through the use of digital manufacturing equipment. These tools afford designers and manufacturers the ability to create individual joints of a variety of types, which perform as well or better than conventional systems. The concept of design for disassembly is a recognizable goal of industrial design and manufacturing, but for Architecture it remains a novel approach. A classic example is Kieran Timberlake's Loblolly House, which employed material assemblies “that are detailed for on-site assembly as well as future disassembly and redeployment” (Flat, Inc, 2008). The use of nearly ubiquitous digital manufacturing tools helps designers create highly functional, precise and effective methods of connection which afford a building to be taken apart and reused or reassembled into alternative configurations or for alternative uses. This paper will survey alternative energy strategies made available through joinery using digital manufacturing and design methods, and will evaluate these strategies in their ability to create diassemblable materials which therefore use less energy - or minimize the entropy of energy over the life-cycle of the material.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=4075520a-6fe7-11e5-bcc8-f7d564ea25ed
last changed	2022/06/07 07:50

_id	acadia08_406
id	acadia08_406
authors	Lee, Yungil; Jumphon Lertlakhanakul ;Jinwon Choi; Yehuda E. Kalay
year	2008
title	Dynamic Architectural Visualization Based On User-Centered Semantic Interoperability
doi	https://doi.org/10.52842/conf.acadia.2008.406
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 406-415
summary	Technically-oriented architectural spaces today are getting complicated because the building contains a number of electronic facilities and complex structures. Furthermore, the advent of the ubiquitous environment enabled the building to provide various services to users and accelerated the importance of architectural visualization as problem-solving and communicating tools. It is recommended that architectural visualization has been more intuitive and effective to support the design decision and collaboration. In this manner, this paper intends to define the role of current architectural visualization with considerations of previous research and related works in the practical field and proposes the appropriate method of architectural visualization. Also, in order to evaluate our idea, we recommend a prototype system based on dynamic and semantic representation with the avatar. It is a kind of simulator for the design of ubiquitous smart space and can deliver to users the better comprehension in how technological oriented space will be constructed and utilized.
keywords	Interoperability; Semantic; Ubiquity; User; Visualization
series	ACADIA
last changed	2022/06/07 07:52

_id	caadria2008_8_session1b_068
id	caadria2008_8_session1b_068
authors	Schoch, Odilo and Peter Russell
year	2008
title	Kanban as a Supporting Tool for the SUSTAINABLE Design and Operation of Smart Buildings The potential of the Toyota Production System in Architecture
doi	https://doi.org/10.52842/conf.caadria.2008.068
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 68-74
summary	This paper describes the translation of the process management tool ‘Kanban’ and its adjacent Toyota Production System into an architectural design supporting tool in the context of computer integrated buildings. The triggering question is: ‘How can architects handle requirements and services of ubiquitous computing in relation to their cursory knowledge about networked services and its unpredictable future development?’. The paper develops a system called ‘Ubicomp-Kanban’ based on the characteristics Toyota Production System. It is suitable for both design and operation of binary networked services in built environment in selected architectural scales and selected functions. The application of the system allows more precise planning and resource optimized operation of academic buildings. The paper does not intend to set up a new approach for building information models (BIM).
keywords	pervasive computing, smart buildings, resource optimization, simulation, sustainability, Toyota Production System, kaizen, kanban
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ecaade2008_125
id	ecaade2008_125
authors	Wu, Kuan-Ying
year	2008
title	Elastic Room
doi	https://doi.org/10.52842/conf.ecaade.2008.905
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 905-912
summary	This paper proposes a physical toolkit and a flexible software framework to simplify the design and exploration of interactive systems for multiple users, devices, and applications in a smart environment. The toolkit, called Elastic-Room, was designed as an infrastructure for interaction design, in which each device is a component that works collaboratively in the smart environment. The supporting software framework includes a dynamically reconfigurable intermediary which simplify the mapping of each device and also use simple protocol to broadcast information to each device. Finally, we demonstrate the Elastic-Room architecture by providing some implemented examples, which are organized in a prototype space of ubiquitous computing full of interactive components.
keywords	Ubiquitous computing, tangible user interfaces, smart environments, interactive design
series	eCAADe
email
last changed	2022/06/07 07:57

_id	bbc9
id	bbc9
authors	Aeck, Richard
year	2008
title	Turnstijl Houses & Cannoli Framing
source	VDM Verlag Dr. Muller Aktiengesellschaft Co. KG, Germany ISBN: 3639078470 ISBN-13: 9783639078473
summary	This work presumes that integrating modeling tools and digital fabrication technology into architectural practice will transform how we build the detached house. Single-family houses come in all shapes and sizes, and in doing so, imply variation as well in certain materials, methods, and lighter classes of structure. Ultimately, houses are extensions, if not expressions, of those dwelling within, yet our attempts to produce appealing manufactured houses have prioritized standardization over variation and fall short of this ideal. Rather than considering new offerings born of the flexibility and precision afforded by digital production, sadly, today’s homebuilders are busy using our advancing fabrication technology to hasten the production of yesterday’s home. In response to such observations, and drawing upon meta-themes (i.e., blending and transition) present in contemporary design, this study proposes a hybrid SIP/Lam framing system and a corresponding family of houses. The development of the Cannoli Framing System (CFS) through 3D and physical models culminates in the machining and testing of full-scale prototypes. Three demonstrations, branded the Turnstijl Houses, are generated via a phased process where their schema, structure, and system geometry are personalized at their conception. This work pursues the variation of type and explores the connection between type and production methodology. Additional questions are also raised and addressed, such as how is a categorical notion like type defined, affected, and even “bred”?
keywords	Digital Manufacturing, Type, Typology, CNC, SIP, SIPs, Foam, PreFab, Prefabrication, Framing, Manufactured House, Modular, Packaged House, Digital, Plywood, Methodology
series	thesis:MSc
type	normal paper
email
more	http://branchoff.net
last changed	2010/11/16 08:29

_id	ecaade2008_134
id	ecaade2008_134
authors	Burry, Jane; Burry, Mark
year	2008
title	The Bonds of Spatial Freedom
doi	https://doi.org/10.52842/conf.ecaade.2008.301
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 301-308
summary	In education and research at this time there is arguably no longer a need to build a strong case for the power of CAAD to support designers – the evidence is there. The major challenges no longer centre on hardware, software and graphics potential or on skills acquisition and adoption. The research that we will report here reveals that computational complexity and geometrical complexity are emerging as the sharp issues that demand a major review of how we model the large hybrid spaces that we seek to construct in design. Computational relational modeling and scripting may have opened a trove of creative possibilities. But it may delude us into painting ourselves into a corner: infinite variety within a much reduced palette of opportunities.
keywords	Architectural Geometry, relational modeling, parametric design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia08_292
id	acadia08_292
authors	Celento, David; Del Harrow
year	2008
title	ceramiSKIN: Digital Possibilities for Ceramic Cladding Systems
doi	https://doi.org/10.52842/conf.acadia.2008.292
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 292-299
summary	CeramiSKIN is an inter-disciplinary investigation by an architect and a ceramics artist examining new possibilities for ceramic cladding using digital design and digital fabrication techniques. Research shown is part of an ongoing collaborative residency at The European Ceramics Work Centre. ¶ Ceramics are durable, sustainable, and capable of easily assuming detailed shapes with double curvature making ceramics seemingly ideal for digitally inspired “plastic” architecture. The primary reason for the decline in complex ceramic cladding is that manual mold-making is time-consuming—which is at odds with today’s high labor costs and compressed construction timeframes. We assert that digital advances in the area of mold-making will assist in removing some of the barriers for the use of complex ceramic cladding in architecture. ; The primary goals of ceramiSKIN as they relate to digitally assisted production are: greater variety and complexity, reduced cost and time, a higher degree of accuracy, and an attempt to facilitate a wider range of digital design possibilities through the use of a ceramics in architectural cladding systems. ¶ The following paper begins with an overview discussing double curvature and biophilia in architecture and their relationship to ceramics. This is followed by detailed commentary on three different experiments prior to a concluding summary.
keywords	Biomorphic; Collaboration; Complex Geometry; Digital Fabrication; Skin
series	ACADIA
last changed	2022/06/07 07:55

_id	ecaade2008_030
id	ecaade2008_030
authors	Donath, Dirk; Lobos, Danny
year	2008
title	Massing Study Support
doi	https://doi.org/10.52842/conf.ecaade.2008.101
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 101-108
summary	Since Hugh Ferris in 1922 started with a series of massing studies the visualization of zoning planning began to be a topic for architects. Setbacks, plot area ratio, maximum building height, and other important attributes must be handled by the architect to fulfill the law, the needs of the clients and his own inspiration. This paper presents the problem of envelope design for high-rise isolated housing buildings, as well as a new Decision Support Systems tool based on the platform of a BIM software, that allows to simulate several options for building envelope according to the parameters required by the city Zoning Planning. These options deliver reliable data and geometry, to be analyzed in real time for the architects, engineers, builders, government and the client in the early stages of the building’s design.
keywords	Constraint Based Design, Parametric Programming, Urban Modeling, Optimization, Architectural Design
series	eCAADe
email
last changed	2022/06/07 07:55

_id	46d4
id	46d4
authors	Fischer, Thomas
year	2008
title	Designing (tools (for designing (tools for ...))))
source	RMIT University, Melbourne
summary	Outcomes of innovative designing are frequently described as enabling us in achieving more desirable futures. How can we design and innovate so as to enable future processes of design and innovation? To investigate this question, this thesis probes the conditions, possibilities and limitations of toolmaking for novelty and knowledge generation, or in other words, it examines designing for designing. The focus of this thesis is on the development of digital design tools that support the reconciliation of conflicting criteria centred on architectural geometry. Of particular interest are the roles of methodological approaches and of biological analogies as guides in toolmaking for design, as well as the possibility of generalising design tools beyond the contexts from which they originate. The presented investigation consists of an applied toolmaking study and a subsequent reflective analysis using second- order cybernetics as a theoretical framework. Observations made during the toolmaking study suggest that biological analogies can, in informal ways, inspire designing, including the designing of design tools. Design tools seem to enable the generation of novelty and knowledge beyond the contexts in and for which they are developed only if their users apply them in ways unanticipated by the toolmaker. Abstract The reflective analysis offers theoretical explanations for these observations based on aspects of second-order cybernetics. These aspects include the modelling of designing as a conversation, different relationships between observers (such as designers) and systems (such as designers engaged in their projects), the distinction between coded and uncoded knowledge, as well as processes underlying the production and the restriction of meaning. Initially aimed at the development of generally applicable, prescriptive digital tools for designing, the presented work results in a personal descriptive model of novelty and knowledge generation in science and design. This shift indicates a perspective change from a positivist to a relativist outlook on designing, which was accomplished over the course of the study. Investigating theory and practice of designing and of science, this study establishes an epistemological model of designing that accommodates and extends a number of theoretical concepts others have previously proposed. According to this model, both design and science generate and encode new knowledge through conversational processes, in which open-minded perception appears to be of greater innovative power than efforts to exercise control. The presented work substantiates and exemplifies radical constructivist theory of knowledge and novelty production, establishes correspondences between systems theory and design research theory and implies that mainstream scientific theories and practices are insufficient to account for and to guide innovation.
keywords	Digital design tools, geometry rationalisation, second-order cybernetics, knowledge generation
series	thesis:PhD
type	normal paper
email
more	http://adt.lib.rmit.edu.au/adt/public/adt-VIT20080424.160537/index.html
last changed	2008/05/10 08:31

_id	ijac20086404
id	ijac20086404
authors	Hudson, Roly
year	2008
title	Knowledge Acquisition in Parametric Model Development
source	International Journal of Architectural Computing vol. 6 - no. 4, 435-451
summary	This paper addresses the development of parametric models in contemporary architectural practice. A parametric model can be regarded as a representation of a solution space and in order to structure this, a description of the problem is required. Architectural design tasks are typically ill structured, the goals may not be defined and the means unknown. Moving from an incomplete problem description to a functional parametric model is a difficult task. This paper aims to demonstrate that through a combination of knowledge acquisition and capture a parametric model can develop from an incomplete problem description. This demonstration draws on existing strands of design theory which are then used to outline a theoretical framework. This framework is then used to examine a case study of a live project and practical examples of the described theory in action are given. The practical observations are the result of a case study involving the author as a participant and observer working with HOK Sport to develop a cladding geometry solution for Lansdowne Road Stadium in Dublin.
series	journal
last changed	2009/03/03 07:48

_id	kasyanov02_paper_eaea2007
id	kasyanov02_paper_eaea2007
authors	Kasyanov, Nikolai
year	2008
title	Study of Architectural Shape Formation in Comparison with Natural Morphogenesis Using Computer Simulation
source	Proceedings of the 8th European Architectural Endoscopy Association Conference
summary	Geometric accuracy of architectural computer models allows to percept and to analyze the three-dimensional spatial compositions using computer images. The concepts and methodology of modern interdisciplinary science, in particular fractal geometry, have already been successfully applied in the various scientific fields, as astronomy, physics, chemistry, biology. Modern ecological paradigm does not separate human life and anthropogenic world from the natural environment considering all as unitary nonlinear ecosystem. The analysis of the architectural shape formation is a part of the study of morphogenesis in such different worlds, as non-living and living nature and man-made forms – real as well as virtual architecture.
keywords	morphogenesis, architectural landscape, computer simulations
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

_id	acadia08_472
id	acadia08_472
authors	Key, Sora; Mark D Gross; Ellen Yi-Luen Do
year	2008
title	Computing Spatial Qualities For Architecture
doi	https://doi.org/10.52842/conf.acadia.2008.472
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 472-477
summary	Computational representation of spatial qualities can lead us to a better understanding of how we construct spatial concepts. Analyses of spatial qualities can support architects in reasoning about the form of a configuration, helping them predict the consequences of a design. ¶ In this paper we present three definitions (enclosure, viewfield, continuity) that describe experiential qualities of architectural spaces. Our project aims to provide computable definitions to these qualities to describe common spatial experiences that are implicitly understood by architects. The description, using familiar terms, reveals the analytical structure of spatial qualities that is based on the geometry of the physical elements. ; We therefore introduce a graphic editor, Descriptor, that provides visualization of spatial qualities as the designer diagrams building elements. The system calculates perceived relationships (surrounded, visible, nearby, nearest) between a viewpoint and the architectural elements based on their geometric properties such as location and distance. The relationships are the components of the three qualities we define. We also present a use scenario to demonstrate how one might use our Descriptor system during early design. ¶ Descriptor is an attempt to formalize descriptions of the spatial qualities to help beginners understand how to make design decisions. In the future, we plan to extend the set of qualities and add detailed attributes of the physical elements to the system.
keywords	Analysis; Computation; Environment; Representation; Spatial
series	ACADIA
last changed	2022/06/07 07:52

_id	8d4d
id	8d4d
authors	Leymarie F, Derix C, Miranda P, Coates P, Calderon C
year	2008
title	Medial Representations for driving the Architectural Creative Process
source	International Architecture Symposium, Barcelona, April 2008
summary	Medial representations of shape provide a powerful framework for the analysis and genesis of architectural forms,layouts, landscapes, cityscapes. In this paper we explore their potential use in driving the architectural creative process for 2D and 3D applications. We consider both the aspects of (i) the analysis of exisiting architectural layouts, and (ii) the genesis of novel ones. The archetypal medial representation of shape is the “medial axis” of Harry Blum (circa 1960). Boundary elements, the outline samples of the objects of interest, are used as the source of a wavefront propagation, for which the quenching points constitute axial symmetries. In 2D layout applications the resulting medial axis (MA) takes the form of a graph which unites geometry and topology of the objects and the field they occupy in one single framework. In the following we first survey the topic of shape representation via medial structures and consider their specific use in architectural analysis and genesis. We then report of early works in extending such ideas for novel applications relevant to architecture.
keywords	medial axis, spatial representation, user perception, occupancy
series	book
type	normal paper
email
last changed	2012/09/20 22:05

_id	cdc2008_243
id	cdc2008_243
authors	Loukissas, Yanni
year	2008
title	Keepers of the Geometry: Architects in a Culture of Simulation
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 243-244
summary	“Why do we have to change? We’ve been building buildings for years without CATIA?” Roger Norfleet, a practicing architect in his thirties poses this question to Tim Quix, a generation older and an expert in CATIA, a computer-aided design tool developed by Dassault Systemes in the early 1980’s for use by aerospace engineers. It is 2005 and CATIA has just come into use at Paul Morris Associates, the thirty-person architecture firm where Norfleet works; he is struggling with what it will mean for him, for his firm, for his profession. Computer-aided design is about creativity, but also about jurisdiction, about who controls the design process. In Architecture: The Story of Practice, Architectural theorist Dana Cuff writes that each generation of architects is educated to understand what constitutes a creative act and who in the system of their profession is empowered to use it and at what time. Creativity is socially constructed and Norfleet is coming of age as an architect in a time of technological but also social transition. He must come to terms with the increasingly complex computeraided design tools that have changed both creativity and the rules by which it can operate. In today’s practices, architects use computer-aided design software to produce threedimensional geometric models. Sometimes they use off-the-shelf commercial software like CATIA, sometimes they customize this software through plug-ins and macros, sometimes they work with software that they have themselves programmed. And yet, conforming to Larson’s ideas that they claim the higher ground by identifying with art and not with science, contemporary architects do not often use the term “simulation.” Rather, they have held onto traditional terms such as “modeling” to describe the buzz of new activity with digital technology. But whether or not they use the term, simulation is creating new architectural identities and transforming relationships among a range of design collaborators: masters and apprentices, students and teachers, technical experts and virtuoso programmers. These days, constructing an identity as an architect requires that one define oneself in relation to simulation. Case studies, primarily from two architectural firms, illustrate the transformation of traditional relationships, in particular that of master and apprentice, and the emergence of new roles, including a new professional identity, “keeper of the geometry,” defined by the fusion of person and machine. Like any profession, architecture may be seen as a system in flux. However, with their new roles and relationships, architects are learning that the fight for professional jurisdiction is increasingly for jurisdiction over simulation. Computer-aided design is changing professional patterns of production in architecture, the very way in which professionals compete with each other by making new claims to knowledge. Even today, employees at Paul Morris squabble about the role that simulation software should play in the office. Among other things, they fight about the role it should play in promotion and firm hierarchy. They bicker about the selection of new simulation software, knowing that choosing software implies greater power for those who are expert in it. Architects and their collaborators are in a continual struggle to define the creative roles that can bring them professional acceptance and greater control over design. New technologies for computer-aided design do not change this reality, they become players in it.
email
last changed	2009/01/07 08:05

_id	caadria2008_58_session6a_479
id	caadria2008_58_session6a_479
authors	Matsushima, Shiro; Rie Takenaka, Daisuke Sasaki
year	2008
title	Study on Application of Motion Capture to Design Methodology for Generating New Geometry: Coupling Computer and Human Performance Using Motion Capture Technology for New Architectural Form and Space
doi	https://doi.org/10.52842/conf.caadria.2008.479
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 479-486
summary	This research aims to develop fundamental design methodologies for human space and product design by motion capture of human activity. It is intended to generate new geometry using a motion capture system as design input device and then to develop it to design interior space and products such as furniture from data extracted from human motion. In order to produce a ubiquitous and comfortable environment, performance modeling focusing on the relationships between space and physical motion is needed. Making an object of complex shape is thought to be a new application of motion capture technology. This research proves that the numeric data of body actions can be transferred and developed to object shapes.
keywords	Motion Capture: Inclusive Design; Ergonomics; Design Process; New Geometry
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	cdc2008_085
id	cdc2008_085
authors	Morad, Sherif
year	2008
title	Building Information Modeling and Architectural Practice: On the Verge of a New Culture
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 85-90
summary	The introduction of machine-readable tools for architectural design, which do not just focus on mere geometry or presentation, but on the richness of information embedded computationally in the design, has impacted the way architects approach and manipulate their designs. With the rapid acceleration in building information modeling (BIM) as a process which fosters machine-readable applications, architects and other participants in the design and construction industry are using BIM tools in full collaboration. As a trend which is already invading architectural practice, BIM is gradually transforming the culture of the profession in many ways. This culture is developing new properties for its participants, knowledge construction mechanisms, resources, and production machineries. This paper puts forward the assumption that BIM has caused a state of transformation in the epistemic culture of architectural practice. It appears that practice in the architecture, engineering and construction (AEC) industry is still in this phase of transformation; on the edge of developing a new culture. The paper attempts to address properties of such an emerging culture, and the new role architects are faced with to overcome its challenges.
email
last changed	2009/01/07 08:05

_id	acadia16_140
id	acadia16_140
authors	Nejur, Andrei; Steinfeld, Kyle
year	2016
title	Ivy: Bringing a Weighted-Mesh Representations to Bear on Generative Architectural Design Applications
doi	https://doi.org/10.52842/conf.acadia.2016.140
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 140-151
summary	Mesh segmentation has become an important and well-researched topic in computational geometry in recent years (Agathos et al. 2008). As a result, a number of new approaches have been developed that have led to innovations in a diverse set of problems in computer graphics (CG) (Sharmir 2008). Specifically, a range of effective methods for the division of a mesh have recently been proposed, including by K-means (Shlafman et al. 2002), graph cuts (Golovinskiy and Funkhouser 2008; Katz and Tal 2003), hierarchical clustering (Garland et al. 2001; Gelfand and Guibas 2004; Golovinskiy and Funkhouser 2008), primitive fitting (Athene et al. 2004), random walks (Lai et al.), core extraction (Katz et al.) tubular multi-scale analysis (Mortara et al. 2004), spectral clustering (Liu and Zhang 2004), and critical point analysis (Lin et al. 20070, all of which depend upon a weighted graph representation, typically the dual of a given mesh (Sharmir 2008). While these approaches have been proven effective within the narrowly defined domains of application for which they have been developed (Chen 2009), they have not been brought to bear on wider classes of problems in fields outside of CG, specifically on problems relevant to generative architectural design. Given the widespread use of meshes and the utility of segmentation in GAD, by surveying the relevant and recently matured approaches to mesh segmentation in CG that share a common representation of the mesh dual, this paper identifies and takes steps to address a heretofore unrealized transfer of technology that would resolve a missed opportunity for both subject areas. Meshes are often employed by architectural designers for purposes that are distinct from and present a unique set of requirements in relation to similar applications that have enjoyed more focused study in computer science. This paper presents a survey of similar applications, including thin-sheet fabrication (Mitani and Suzuki 2004), rendering optimization (Garland et al. 2001), 3D mesh compression (Taubin et al. 1998), morphin (Shapira et al. 2008) and mesh simplification (Kalvin and Taylor 1996), and distinguish the requirements of these applications from those presented by GAD, including non-refinement in advance of the constraining of mesh geometry to planar-quad faces, and the ability to address a diversity of mesh features that may or may not be preserved. Following this survey of existing approaches and unmet needs, the authors assert that if a generalized framework for working with graph representations of meshes is developed, allowing for the interactive adjustment of edge weights, then the recent developments in mesh segmentation may be better brought to bear on GAD problems. This paper presents work toward the development of just such a framework, implemented as a plug-in for the visual programming environment Grasshopper.
keywords	tool-building, design simulation, fabrication, computation, megalith
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

For more results click below: