Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 491

Reformat results as: short short into frame detailed detailed into frame

_id	acadia08_448
id	acadia08_448
authors	Alfaris, Anas; Riccardo Merello
year	2008
title	The Generative Multi-Performance Design System
doi	https://doi.org/10.52842/conf.acadia.2008.448
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 448-457
summary	This paper proposes a framework for an integrated computational design system. This design system builds on the strengths inherent in both generative synthesis models and multi-performance analysis and optimization. Four main design mechanisms and their mathematical models are discussed and their integration proposed. The process of building the design system begins by a top-down decomposition of a design concept. The different disciplines involved are decomposed into modules that simulate the respective design mechanisms. Subsequently through a bottom-up approach, the design modules are connected into a data flow network that includes clusters and subsystems. This network forms the Generative Multi-Performance Design System. This integrated system acts as a holistic structured functional unit that searches the design space for satisfactory solutions. The proposed design system is domain independent. Its potential will be demonstrated through a pilot project in which a multi-performance space planning problem is considered. The results are then discussed and analyzed.
keywords	Analysis; Behavior; Generative; Optimization; Performance
series	ACADIA
type	normal paper
last changed	2022/06/07 07:54

_id	ijac20097303
id	ijac20097303
authors	Taron, Joshua M.
year	2009
title	Interactive Hemostasis Modeling in Urban Network Design
source	International Journal of Architectural Computing vol. 7 - no. 3,375-387
summary	This paper describes a type of project that images a city as it might exist given the integration of hemostatic procedures within pedestrian networks during emergencies requiring full-scale egress from an urban core. It articulates the steps taken to integrate a pre-existing C++ hemostasis model (C. Jacob, 2008) into Maya software in order to describe how the project operates on a computational level. By projecting these agent-based logics directly into/onto each pedestrian in the city (the smallest unit of the system), egress-oriented infrastructure can shift from being extensively predetermined in form (concrete barriers, metal railing, police barricades, etc.), to something more intensively defined, real-time, and locally on-demand. These procedures are situated within a larger schema based on the structural principles of Norbert Wiener's cybernetic feedback loops, that acknowledge and allow for hybrid (top-down + bottom-up) awareness and control within systems. The project attempts to ally itself with emerging forms of network design with similar structural typologies supported through the use of personal mobile devices (PMDs) in urban environments.
series	journal
last changed	2009/10/20 08:02

_id	acadia08_118
id	acadia08_118
authors	Cabrinha, Mark
year	2008
title	Gridshell Tectonics: Material Values Digital Parameters
doi	https://doi.org/10.52842/conf.acadia.2008.118
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 118-125
summary	This paper begins with a simple proposition: rather than mimicking the geometric structures found in nature, perhaps the most effective modes of sustainable fabrication can be found through understanding the nature of materials themselves. Material becomes a design parameter through the constraints of fabrication tools, limitations of material size, and most importantly the productive capacity of material resistance—a given material’s capacity and tendencies to take shape, rather than cutting shape out of material. ¶ Gridshell structures provide an intriguing case study to pursue this proposition. Not only is there clear precedent in the form-finding experiments of Frei Otto and the Institute for Lightweight Structures, but also the very NURBS based tools of current design practices developed from the ability of wood to bend. Taking the bent wood spline quite literally, gridshells provide a means that is at once formally expressive, structurally optimized, materially efficient, and quite simply a delight to experience. The larger motivation of this work anticipates a parametric system linking the intrinsic material values of the gridshell tectonic with extrinsic criteria such as programmatic needs and environmental response. ¶ Through an applied case study of gridshells, the play between form and material is tested out through the author’s own experimentation with gridshells and the pedagogical results of two gridshell studios. The goal of this research is to establish a give-and-take relationship between top-down formal emphasis and a bottom-up material influence.
keywords	Digital Fabrication; Form-Finding; Material; Pedagogy; Structure
series	ACADIA
last changed	2022/06/07 07:54

_id	sigradi2008_078
id	sigradi2008_078
authors	Lobos, Danny; Dirk Donath
year	2008
title	Top down and bottom up – using BIM to merge these two design strategies.
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	Our current research is focused on the optimization and evaluation of the architectural building design (gestalt), related and in balance to the inner organization of a building, the floorplan layout. This paper is focused on the impact of Space Layout Planning supported by Information and Communication Technologies (ICT) applied to Architectural Design. We present an overview and wide description of the „architectural design“, the classical definition and methods; and its evolution in practice since the ICT tools impact of the last forty years. Definition such as space program, space relationships, space function are wide discussed to understand the phenomena of architectural layout design, the parameters, variables, constraints and goals of each design. Second we present the state of the art and the current techniques and approaches (optimization, generative systems, artificial intelligence, genetic algorithms, physically based modeling, etc), a classification structure is generated to visualize the areas of impact and use of each technique (different areas from architectural design). Finally we described a complete framework to research and develop our own methodologies based on a specific case of architectural design, the current CAD tools and the possible develop of new tools using the impact of BIM systems.
keywords	space layout planning, computer aided design, functional planning, architectural floor layout, design methodologies, simulation and evaluation
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	sigradi2008_081
id	sigradi2008_081
authors	Kirschner, Ursula
year	2008
title	Study of digital morphing tools during the design process - Application of freeware software and of tools in commercial products as well as their integration in AutoCAD
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This research work examines methods of experimental designing with CAAD in a CAD laboratory with architecture students as the testing persons. Thereby the main focus is on the early phase of finding forms, in which different techniques with digital media are tried out in the didactic architectural design lessons. In these work have been traced the influences of the media employed on the design processes and combined the approaches of current CAAD research with aspects from classic design theory. For mathematical rules of proportion, atmospheric influence factors and analogy concepts in architecture, I have developed design methods which have been applied and verified in several series of seminars. (Kirschner, U.: 2000, Thesis, a CAAD supported architectural design teaching, Hamburg, school of arts). Previous experimental exercises showed that morphological sequences of modeling are effective sources for playful designing processes. In the current work these approaches are enhanced and supplemented by different morphological architectural concepts for creating shapes. For this purpose 2D based software like Morphit, Winmorph and other freeware were used. Whereas in the further development of this design technique we used 3D freeware morphing programs like zhu3D or Blender. The resulting morphological shapes were imported in CAD and refined. Ideally the morphing tool is integrated in the modeling environment of the standard software AutoCAD. A digital city model is the starting basis of the design process to guarantee the reference to the reality. The applied design didactic is predicated on the theories of Bernhard Hoesli. The act of designing viewed as „waiting for a good idea“ is, according to him, unteachable; students should, in contrast, learn to judge the „the force of an idea“. On the subject of morphology a form-generating method in the pre-design phase has been tested. Starting from urban-planning lines on an area map, two simple geometric initial images were produced which were merged by means of morphing software. Selected images from this film sequence were extruded with CAAD to produce solid models as sectional drawings. The high motivation of the students and the quality of the design results produced with these simple morphing techniques were the reason for the integration of the artistic and scientific software into the creative shape modeling process with the computer. The students learned in addition to the „bottom up “and „ top down” new design methods. In the presentation the properties and benefits of the morphing tools are presented in tables and are analyzed with regard to the architectural shape generating in an urban context. A catalogue of criteria with the following topics was developed: user friendliness, the ability of integrating the tools or as the case may be the import of data into a CAD environment, the artistic aspects in terms of the flexibility of shape generating as well as the evaluation of the aesthetic consideration of shapes.
keywords	Architectural design, freeware morphing software, AutoCAD
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	sigradi2008_179
id	sigradi2008_179
authors	Toloudi, Zenovia
year	2008
title	Architectural Brand valuations through a tag-based learning machine.
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	Brand is a set of associations related to an object from a particular source (Libai 2008). Such an object can be a product, person or service. Architecture is both service and product. However architectural Branding has never been clearly defined. This probably happens due to the lack of tools to measure the architectural Brand. This paper explores a direction to evaluate the architectural Brand by using computational methods in order to offer a better understanding regarding the awareness, reputation and prominence of the architectural firm. The methodology is based on case studies in which the brands of different types of architectural firms are analyzed, measured and compared to each other through a two-part process: a. the development of one tool to statistically measure the architectural Brand and b. the interpretation of the results of the measurements. a. Learning machine In order to make these brand measurements within a specific group of people or images, this paper develops an interactive tool that uses an image database. The tool constitutes a learning machine; it makes a hypothetic hierarchical categorization of the image database into + and – using an initial sample and it proposes to the user the first image of the list; finally, the user validates the image by confirming or not the machine’s guess. In this image database, each image is described as an array of attributes (tags). Tags can be generated either by the architectural firm itself or can emerge by users. b. Evaluation of results This interactive, user-friendly tool is drawing a user’s preference by proposing similar images from the database based on a learning process from the user input (initial sample and feedback); alternatively, it can be used as a questionnaire for quantitative research. Moreover, this tool categorizes photos of similar content. This research focuses on the following issues as parameters of the effectiveness of the process: o Simplicity of the database organization through computation. o Top-down Vs. Bottom-up tagging of works/ images mechanism. o Future use of the image database. o Transformation of the image database while becoming larger. o “Market” segmentation or not. o Combination of the tool with other Brand measurement tools. o Combination of the tool with other image databases. The outcome of this approach can provide an analysis and metric of the brand strength of different architectural firms. Furthermore, it can help architectural firms to understand better how they are perceived by others in order to improve their brand image and associations.
keywords	Branding, learning machine, image database, attribute, tag
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	ddss2004_ra-33
id	ddss2004_ra-33
authors	Diappi, L., P. Bolchim, and M. Buscema
year	2004
title	Improved Understanding of Urban Sprawl Using Neural Networks
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 14020-2408-8, p. 33-49
summary	It is widely accepted that the spatial pattern of settlements is a crucial factor affecting quality of life and environmental sustainability, but few recent studies have attempted to examine the phenomenon of sprawl by modelling the process rather than adopting a descriptive approach. The issue was partly addressed by models of land use and transportation which were mainly developed in the UK and US in the 1970s and 1980s, but the major advances were made in the area of modelling transportation, while very little was achieved in the area of spatial and temporal land use. Models of land use and transportation are well-established tools, based on explicit, exogenouslyformulated rules within a theoretical framework. The new approaches of artificial intelligence, and in particular, systems involving parallel processing, (Neural Networks, Cellular Automata and Multi-Agent Systems) defined by the expression “Neurocomputing”, allow problems to be approached in the reverse, bottom-up, direction by discovering rules, relationships and scenarios from a database. In this article we examine the hypothesis that territorial micro-transformations occur according to a local logic, i.e. according to use, accessibility, the presence of services and conditions of centrality, periphericity or isolation of each territorial “cell” relative to its surroundings. The prediction capabilities of different architectures of supervised Neural networks are implemented to the south Metropolitan area of Milan at two different temporal thresholds and discussed. Starting from data on land use in 1980 and 1994 and by subdividing the area into square cells on an orthogonal grid, the model produces a spatial and functional map of urbanisation in 2008. An implementation of the SOM (Self Organizing Map) processing to the Data Base allows the typologies of transformation to be identified, i.e. the classes of area which are transformed in the same way and which give rise to territorial morphologies; this is an interesting by-product of the approach.
keywords	Neural Networks, Self-Organizing Maps, Land-Use Dynamics, Supervised Networks
series	DDSS
last changed	2004/07/03 22:13

_id	acadia08_158
id	acadia08_158
authors	Hight, Christopher; Natalia Beard; Michael Robinson
year	2008
title	Hydrauli_City: Urban Design, Infrastructure, Ecology
doi	https://doi.org/10.52842/conf.acadia.2008.158
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 158-165
summary	The Hydrauli_city project was commissioned by the Harris County Flood Control District, Brays Bayou Partnership and the Rice School of Architecture to research the transformation of one of the 21 main Bayous in Houston. The project seems perfectly aligned with the theme of the issue because it examines the relationship between infrastructure, risk and urban design, and does so by attempting to leverage diverse time scales and scales of intervention into the maintenance of this infrastructure, rethinking the legacy of its top-down 20th century planning logics. Moreover, it raises key questions about new agencies and sites that may be available to architects that seek to engage the political ecologies of the contemporary metropolis. Through research on the hydraulic urbanism of Houston and through three speculative design proposals, Hydrauli_city presents research about transforming Brays Bayou. The project attempts to provide a figure for and foster the new forms of collectives and networks required to transform the urban condition of Houston without resorting to unrealistic top-down planning infrastructures. We located several scales and time-frames of operations, from micro-scaled interventions derived from ongoing maintenance of the bayous to larger scale transformations now possible due to the programs to reduce the risk of flooding in the bayou’s watershed. Hydrauli_city maps the confluences of interests and agencies invested in Brays Bayou at this crucial moment in its history, and offers proposals of bold new civic spaces for the Green Century. The project will be disseminated via an interactive website and a series of public presentations to raise awareness and spark conversation. Flood risk management is a hybrid phenomenon, at once the object of scientific knowledge, engineering practice, and political and economic forces, positioning the architect in a prime-position to intervene.
keywords	Infrastructure; Mapping; Morphogenesis; System; Urbanism
series	ACADIA
last changed	2022/06/07 07:50

_id	acadia08_478
id	acadia08_478
authors	Yan, Wie
year	2008
title	Environment-Behavior Simulation: From CAD to BIM and Beyond
doi	https://doi.org/10.52842/conf.acadia.2008.478
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 478-485
summary	This paper describes our research on environment-behavior simulation and focuses on the modeling of built environments using Computer-Aided Design (CAD) and Building Information Modeling (BIM). Our environment-behavior simulation addresses the problem of predicting and evaluating the impacts of built environments on their human inhabitants. We present simulation systems comprising an agent-based virtual user model and building models created with CAD and BIM tools. We compare the use of CAD vs. BIM with two case studies for environment-behavior simulation, and describe the essential parts of modeling buildings for the simulation, including geometry modeling—how the building components are shaped, semantic modeling—what the building components are, and pattern modeling—how the building components are used by users. We conclude that a new extensible and pattern-embedded BIM system will be necessary to facilitate environment-behavior simulation.
keywords	Behavior; BIM; Environment; Information; Simulation
series	ACADIA
last changed	2022/06/07 07:57

_id	sigradi2016_450
id	sigradi2016_450
authors	Araujo, André L.; Celani, Gabriela
year	2016
title	Exploring Weaire-Phelan through Cellular Automata: A proposal for a structural variance-producing engine
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.710-714
summary	Complex forms and structures have always been highly valued in architecture, even much before the development of computers. Many architects and engineers have strived to develop structures that look very complex but at the same time are relatively simple to understand, calculate and build. A good example of this approach is the Beijing National Aquatics Centre design for the 2008 Olympic Games, also known as the Water Cube. This paper presents a proposal for a structural variance-producing engine using cellular automata (CA) techniques to produce complex structures based on Weaire-Phelan geometry. In other words, this research evaluates how generative and parametric design can be integrated with structural performance in order to enhance design flexibility and control in different stages of the design process. The method we propose was built in three groups of procedures: 1) we developed a method to generate several fits for the two Weaire-Phelan polyhedrons using CA computation techniques; 2) through the finite elements method, we codify the structural analysis outcomes to use them as inputs for the CA algorithm; 3) evaluation: we propose a framework to compare how the final outcomes deviate for the good solutions in terms of structural performance and rationalization of components. We are interested in knowing how the combination of the procedures could contribute to produce complex structures that are at the same time certain rational. The system developed allows the structural analysis of structured automatically generated by a generative system. However, some efficient solutions from the structural performance point of view do not necessarily represent a rational solution from the feasibility aspects.
keywords	Structural design; Complex structures; Bottom-up design approach
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	acadia08_354
id	acadia08_354
authors	Vanucci, Marco
year	2008
title	Pluri-Potential Branching System
doi	https://doi.org/10.52842/conf.acadia.2008.354
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 354-363
summary	In contemporary construction industry, parametric softwares are often employed in design processes of rationalization and post-rationalization where, given a certain project, the answer to specific problems is required to actualize the desired shape [problem-solving approach]. ¶ This paper outlines a research project intended to develop a generative approach to digital design where the employment of parametric and algorithmic tools provide the possibility to set up integral multi-parametric systems; organizational as well as geometrical and structural aspects are investigated and, in parallel, they inform each other. ¶ The paper unfolds through constant reference to natural systems and, more specifically, develops the notion of pluri-potential systems deriving principle from the interaction between biological processes and computation. ¶ The results address the shift from mono-parametric problem-solving approaches to a generative problem-caring process where the integration of multiple system logics contribute to the development of a virtual pluri-potential set up. ¶ Finally, the paper explore the generative interdependency between structural, geometrical, organizational and computational logics of a system studying the manifold potentials of branching structures in the attempt to explore the emergent synergy between biological processes, computation and architectural design.
keywords	Branching; Evolution; Generative; Open Systems; Parametric
series	ACADIA
last changed	2022/06/07 07:58

_id	caadria2008_41_session4b_335
id	caadria2008_41_session4b_335
authors	Biao, Li; Li Rong, Xue Kai, Liu Chang, Gao Qin
year	2008
title	A Generative Tool Base on Multi-Agent System: Algorithm of “HighFAR” and Its Computer Programming
doi	https://doi.org/10.52842/conf.caadria.2008.335
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 335-342
summary	Utilizing the principle of multi-agent system by computer programming, the paper presents achievement of an architectural generative design tool which implements intelligent architecture design with the focus of the layout in Asian high density “Floor Area Ratio” (FAR). Applying with the software, architects can get a high density FAR planning design in several minutes. From macroscopic position of building agents in geography to encode the agents by computer programming, the paper expounds the process of the generative tool and its mathematics algorithms.
keywords	Multi-agent system, FAR, genetic algorithm, generator
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2008_192
id	ecaade2008_192
authors	Fioravanti, Antonio
year	2008
title	An e-Learning Environment to Enhance Quality in Collaborative Design
doi	https://doi.org/10.52842/conf.ecaade.2008.829
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 829-836
summary	The research project is aimed at enhancing the overall quality of buildings through a suitable exercise of design collaboration, and a delocalized cross-disciplinary learning for university students in the faculties of Architecture and Engineering. The research defines methods, techniques and ICT programs to provide education in the culture and exercise of collaboration for future professionals and technicians who operate in the field of the design and construction of complex building systems.
keywords	Collaborative Design, e-learning, knowledge bases, ontologies, multi-agent system
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ddss2008-11
id	ddss2008-11
authors	Gohnai, Y.; A. Ohgai and K. Watanabe
year	2008
title	A simulation model development of firefightingactivity by community residents against coseismic firespread using multi-agent systemAs a support tool for community-based disaster preventionplanning
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper attempted to develop a simulation model of residents’ firefighting activity against coseismic fire spread using multi-agent system. The developed model was applied to a case study area. In the application, the simulations were carried out to the existing area and eleven cases of the assumption (virtual conditions) of the area where are implemented various non-physical and physical measures. As a result, the measures with only physical and haphazard multitude of measures did not show a remarked effect of disaster prevention performance. And, it is confirmed that the model can visually, dynamically and quantitatively output results. From these outputs, the possibility of contribution for enhancing residents’ awareness and drafting a plan of disaster prevention was confirmed. However, there are still some problems to be solved for the practical use of the model.
keywords	Community-based Planning for Disaster Prevention, Planning Support System, Fire Spread Simulation, Firefighting simulation, Multi-agent system, Cellular Automata
series	DDSS
last changed	2008/09/01 17:06

_id	acadia08_208
id	acadia08_208
authors	Griffiths, Jason
year	2008
title	Man + Water + Fan = Freshman: Natural Process of Evaporative Cooling and the Digital Fabrication of the ASU Outdoor Dining Pavilion
doi	https://doi.org/10.52842/conf.acadia.2008.208
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 208-213
summary	To the east of Johnson City TX is the Lyndon B. Johnson’s family home. Part of the Johnson Estate2 is given over to a working farm circa 1870 that presents various aspects of domestic practice from the era. This includes a desert fridge which is a simple four-legged structure with a slightly battered profile that’s draped in calico. Its principle is simple; water from an upturned jar is drawn by osmosis down the sides of the calico where it evaporates in wind currents drawn though a “dog run” between two log cabins. Cooled air circulates within the structure and where cheese and milk are kept fresh during the summer. The desert fridge is a simple system that reaches a state of equilibrium through the natural process of evaporation. ¶ This system provides a working model for a prototype structure for an outdoor dining pavilion that was designed and constructed on the campus of Arizona State University. The desert fridge is the basis for a “biological process”3 of evaporative cooling that has been interpreted in terms a ritual of outdoor dining in arid climates. The pavilion is intended as a gathering point and a place of interaction for ASU freshmen. The long-term aim of this project is to provide a multiple of these pavilions across the campus that will be the locus of a sequence of dining events over a “dining season”4 during the fall and spring semester. ; This paper describes how the desert fridge principle has been interpreted in the program and construction of the dining pavilion. It explores a sequence of levels by which the structure, via digital production process, provides an educational narrative on sustainability. This communicative quality is portrayed by the building in direct biological terms, through tacit knowledge, perceived phenomena, lexical and mechanical systems. The paper also describes how these digital production process were used in the building’s design and fabrication. These range from an empirical prognosis of evaporative cooling effects, fluid dynamics, heat mapping and solar radiation analysis through to sheet steel laser cutting, folded plate construction and fully associative variable models of standard steel construction. The aim of the pavilion is to create an environment that presents the evaporative cooling message at a multiple of levels that will concentrate the visitor in holistic understanding of the processes imbued within the building.5
keywords	Communication; Digital Fabrication; Environment; System
series	ACADIA
last changed	2022/06/07 07:51

_id	ijac20108101
id	ijac20108101
authors	Phan, Viet Toan; Seung Yeon Choo
year	2010
title	Augmented Reality-Based Education and Fire Protection for Traditional Korean Buildings
source	International Journal of Architectural Computing vol. 8 - no. 1, 75-91
summary	This study examines an application of Augmented Reality technology (AR) for Korean Cultural Traditional Buildings, specifically, the Namdaemun Gate, "National Treasure No 1" of the Republic of Korea. Unfortunately, in February 2008, the Namdaemun Gate burned down, despite the efforts of many firemen, as the main difficulty was getting the fire under control without any structural knowledge of the wooden building. Hence, with the great advances in digital technology, an application of virtual technical information to traditional buildings is needed, and the new technology of AR offers many such advantages for digital architectural design and construction fields. While AR is already being considered as new design approach for architecture, outdoor AR is another practical application that can take advantage of new wearable computer equipment (Head-mounted display also know as HMD, position and orientation sensors, and mobile computing) to superimpose virtual graphics of traditional buildings (in this case, Namdaemun Gate) in a real outdoor scene. Plus, outdoor AR also allows the user to move freely around and inside a 3D virtual construction, thereby offering important training opportunities, for example, specific structural information in the case of firemen and mission planning in the case of a real-life emergency. In this example, the proposed outdoor AR system is expected to provide important educational information on traditional wooden building for architects, archaeologists, and engineers, while also assisting firemen to protect such special buildings.
series	journal
last changed	2019/05/24 09:55

_id	sigradi2008_180
id	sigradi2008_180
authors	Vincent, Charles
year	2008
title	Gulliver in the land of Generative Design
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	The current trend in architectural design towards architectural computing has been treated both from a philosophical standing point and as an operational systems’ problem, in a quest for explications which could at last break ground for a more broad development and adoption of design tools. As Kostas Terzidis (2007) puts it, the intuitiveness that architects have put on so high a pedestal seems to be the central issue to be dealt with by both views. There seems to be no apparent shortcut toward the reconciliation between traditional practice and new media and most certainly it is not only a problem of interface design, but one of design method clarification and reinterpretation of those methods into computing systems. Furthermore, there’s no doubt left as to whether computing systems can generate such new patterns as to impact our own understanding of architecture. But even if computer algorithms can make possible the exploration of abstract alternatives to an abstract initial idea, as in Mathematica and Processing, the issue of relating abstract and geometric representations of human centered architecture lays in the hands of architects, programmers or, better yet, architect-programmers. What seems now to be the relevant change is that architectural design might escape from the traditional sequence embedded in the need – program – design iterations – solution timeline, substituted by a web of interactions among differing experimental paths, in which even the identification of needs is to be informed by computing. It is interesting to note that the computational approach to architectural design has been praised for the formal fluidity of bubbles and Bezier shapes it entails and for the overcoming of functionalist and serialization typical of modern architecture. That approach betrays a high degree of canonic fascination with the tools of the trade and very little connection to the day to day chores of building design. On the other hand, shall our new tools and toys open up new ways of thinking and designing our built landscape? What educational issues surface if we are to foster wider use of the existing technologies and simultaneously address the need to overtake mass construction? Is mass customization the answer for the dead end modern architecture has led us to? Can we let go the humanist approach begun in Renascence and culminated in Modernism or shall we review that approach in view of algorithmic architecture? Let us step back in time to 1726 when Swift’s ‘Travels into Several Remote Nations of the World by Lemuel Gulliver’ was first published. In Swift’s fierce critic of what seemed to him the most outrageous ideas, he conceived a strange machine devised to automatically write books and poetry, in much the same generative fashion that now, three centuries later, we begin to cherish. “Every one knew how laborious the usual method is of attaining to arts and sciences; whereas by his contrivance, the most ignorant person at a reasonable charge, and with a little bodily labour, may write books in philosophy, poetry, politicks, law, mathematics and theology, without the least assistance from genius or study. He then led me to the frame, about the sides whereof all his pupils stood in ranks. It was twenty foot square, placed in the middle of the room. The superficies was composed of several bits of wood, about the bigness of a dye, but some larger than others. They were all linked together by slender wires. These bits of wood were covered on every square with paper pasted on them; and, on these papers were written all the words of their language in their several moods, tenses, and declensions, but without any order. The professor then desired me to observe, for he was going to set his engine at work. The pupils at his command took each of them hold of an iron handle, whereof there were forty fixed round the edges of the frame; and giving them a sudden turn, the whole disposition of words was entirely changed. He then commanded six and thirty of the lads to read the several lines softly as they appeared upon the frame; and where they found three or four words together that might make part of a sentence, they dictated to the four remaining boys who were scribes. This work was repeated three or four times, and at every turn the engine was so contrived, that the words shifted into new places, as the square bits of wood moved upside down.” (Jonathan Swift, Gulliver’s Travels, A Voyage to Balnibarbi) What astonishing forecast did Swift show in that narrative that, in spite of the underlying incredulity and irony, still clarifies our surprise when faced to what might seem to some of us just an abandonment of all that architects and designers have cherished: creativeness and inventiveness. Yet, we could argue that such a radical shift in paradigm occurred once when master builders left the construction ground and took seat at drafting boards. The whole body of design and construction knowledge was split into what now seem to us just specialties undertaken by more and more isolated professionals. That shift entailed new forms of representation and prediction which now each and all architects take for granted. Also, Cartesian space representation turned out to be the main instrument for professional practice, even if one can argue that it is not more than the unfolding of stone carving techniques that master builders and guilds were so fond of. Enter computing and all its unfolding, i.e. DNA coding, fractal geometry, generative computing, nonlinear dynamics, pattern generation and cellular automata, as a whole new chapter in science, and compare that to conical perspective, descriptive and analytical geometry and calculus, and an image begins to form, delineating a separation between architect and digital designer. In previous works, we have tried approaching the issues regarding architects education in a more consensual way. But it seems now that the whole curricular corpus might be changed as well. The very foundations upon which we prepare future professionals shall change, not only in College, but in High School as well. In this paper, we delve further into the disconnect between current curricula and digital design practices and suggest new disciplinary grounds for a new architectural education.
keywords	Educational paradigm; Design teaching; Design methods;
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	ascaad2016_027
id	ascaad2016_027
authors	Cocho-Bermejo, Ana
year	2016
title	Time in Adaptable Architecture - Deployable emergency intelligent membrane
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 249-258
summary	The term "Parametricism" widespread mainly by Patrick Schumacher (Schumacher, 2008) is worthy of study. Developing the concept of Human Oriented Parametric Architecture, the need of implementing time as the lost parameter in current adaptive design techniques will be discussed. Morphogenetic processes ideas will be discussed through the principle of an adaptable membrane as a case study. A model implementing a unique Arduino[i] on the façade will control its patterns performance through an Artificial Neural Network that will understand the kind of scenario the building is in, activating a Genetic Algorithm that will optimize the insulation performance of the ETFE pillows. The system will work with a global behavior for façade pattern performance and with a local one for each pillow, giving the option of individual sun-shading control. Machine learning implementation will give the façade the possibility to learn from the efficacy of its decisions through time, eliminating the need of a general on-off behavior.
series	ASCAAD
email
last changed	2017/05/25 13:31

_id	sigradi2008_077
id	sigradi2008_077
authors	Briones, Carolina
year	2008
title	A collaborative project experience in an architectural framework, working with Open Source applications and physical computing [Diseño de Plataformas Digitales e Interactivas: una experiencia educativa trabajando colaborativamente con aplicaciones de Código Abierto y Computación Física]
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	Nowadays, thanks to the telecommunication revolution and therefore the massive spread of Internet, we have seen the come up of international architectural offices with branches located in different continent, working in a collaborative fashion, surpassing physical and time frontiers. At the same time, the multidisciplinary work between designers, architects, engineers, programmers and even biologist, between others, have been taking place in the new network society. All transformations also supported by the arising of FOSS (Free Open Source Software) and the virtual communities behind them, which allow the creation of non-traditional or specific software, the association between disciplines, and also, the formation of meeting scenarios for a mixture of individuals coming up with multiple motivation to coexist in collaborative environment. Furthermore, it is possible to argue that Open Source applications are also the reflection of a social movement, based on the open creation and exchange of information and knowledge. Do the appeared of FOSS compel us to re-think our working and teaching methods? Do they allow new modes of organizing and collaborating inside our architectural practices?. This paper would like to address these questions, by presenting the results of the “Experience Design” course, which by implementing teaching methods based on Open Source principles and cutting-edge tools, seeks to approach students to these new “way of do”, knowledge and methodologies, and overall, focus them on the science behind the computer. This paper describes the “Experience Design” course, in which architectural graduate students of Universidad Diego Portales (Chile), put for first time their hands on the creation of interactive interfaces. By acquiring basic knowledge of programming and physical computing, students built in a collaborative way a responsive physical installation. The course use as applications “Processing” and “Arduino”. The first one is an Open Source programming language and environment for users who want to program images, animation, and interactions. It has a visual context and serve as a software sketchbook and professional production tool. Processing is a project initiated by Ben Fry and Casey Reas, at the MIT Media Lab (www.processing.org). The second is an Open Source electronics prototyping platform based on flexible, easy-to-use hardware and software. Arduino has a microcontroller (programmed with Processing language) which can sense the environment by receiving input from a variety of sensors and can affect its surroundings by controlling lights, motors, and other actuators (www.arduino.cc). Both environments shared a growing community of people working in related projects and extending useful assistance for beginners. In this paper it is presented the current state of the pilot course and some of the initials results collected during the process. Students and teacher’s debates and evaluations of the experience have been exposed. Together with a critical evaluation in relation to the accomplishment of the effort of place together different disciplines in one collaborative project akin, architecture, design, programming and electronic. Finally, futures modifications of the course are discussed, together with consideration to take in account at the moment of bring Open Source and programming culture into the student curriculum.
keywords	Physical computing, teaching framework, Open Source, Interactive Installation
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ddss2008-31
id	ddss2008-31
authors	Heurkens, Erwin W.T.M.
year	2008
title	The Urban Decision RoomApplication and Evaluation of an Urban Management Instrument
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	The Urban Decision Room (UDR) should be placed in the tradition of urban design and planning discipline that is taught, and into which research is carried out, at the Faculty of Architecture at the Delft University of Technology. The UDR was developed at the faculty as one of the new design and planning methods with its own specific features. The UDR is specifically aimed at decision-making processes in the practice of urban planning, and particularly at complex urban area development projects. The background to the design enables the UDR to support planning decisions that are made at urban planning element level. The participants in the interactive UDR sessions are asked to provide concrete solutions for urban planning design problems (in terms of preferences for particular functions, number of plots, etc.) and to enter them in a simulation model. A computer network is then used to calculate the common solution space of all the proposals, which is then projected onto a central screen. This outcome generally provides the basis for further discussions and negotiations, after which another round as described above can be held. The paper first focuses on the background and the main features of the UDR system. Secondly, the decision-making issue and a description of a specific Urban Decision Room model, the UDR Heijsehaven will be explained. Thirdly the structure of, and the experiences from, the experimental sessions with the Urban Decision Room Heijsehaven are described. After that the results of the evaluation of the UDR system by participants is presented and finally the follow-up assignment for the UDR system is carried out.
keywords	Urban Decision Room, UDR Heijsehaven, Urban Renewal Project, Urban Planning, Urban Management Instrument, Common Solution Space, Decision Support System
series	DDSS
last changed	2008/09/01 17:06

For more results click below: