Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 466

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2008_180
id	sigradi2008_180
authors	Vincent, Charles
year	2008
title	Gulliver in the land of Generative Design
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	The current trend in architectural design towards architectural computing has been treated both from a philosophical standing point and as an operational systems’ problem, in a quest for explications which could at last break ground for a more broad development and adoption of design tools. As Kostas Terzidis (2007) puts it, the intuitiveness that architects have put on so high a pedestal seems to be the central issue to be dealt with by both views. There seems to be no apparent shortcut toward the reconciliation between traditional practice and new media and most certainly it is not only a problem of interface design, but one of design method clarification and reinterpretation of those methods into computing systems. Furthermore, there’s no doubt left as to whether computing systems can generate such new patterns as to impact our own understanding of architecture. But even if computer algorithms can make possible the exploration of abstract alternatives to an abstract initial idea, as in Mathematica and Processing, the issue of relating abstract and geometric representations of human centered architecture lays in the hands of architects, programmers or, better yet, architect-programmers. What seems now to be the relevant change is that architectural design might escape from the traditional sequence embedded in the need – program – design iterations – solution timeline, substituted by a web of interactions among differing experimental paths, in which even the identification of needs is to be informed by computing. It is interesting to note that the computational approach to architectural design has been praised for the formal fluidity of bubbles and Bezier shapes it entails and for the overcoming of functionalist and serialization typical of modern architecture. That approach betrays a high degree of canonic fascination with the tools of the trade and very little connection to the day to day chores of building design. On the other hand, shall our new tools and toys open up new ways of thinking and designing our built landscape? What educational issues surface if we are to foster wider use of the existing technologies and simultaneously address the need to overtake mass construction? Is mass customization the answer for the dead end modern architecture has led us to? Can we let go the humanist approach begun in Renascence and culminated in Modernism or shall we review that approach in view of algorithmic architecture? Let us step back in time to 1726 when Swift’s ‘Travels into Several Remote Nations of the World by Lemuel Gulliver’ was first published. In Swift’s fierce critic of what seemed to him the most outrageous ideas, he conceived a strange machine devised to automatically write books and poetry, in much the same generative fashion that now, three centuries later, we begin to cherish. “Every one knew how laborious the usual method is of attaining to arts and sciences; whereas by his contrivance, the most ignorant person at a reasonable charge, and with a little bodily labour, may write books in philosophy, poetry, politicks, law, mathematics and theology, without the least assistance from genius or study. He then led me to the frame, about the sides whereof all his pupils stood in ranks. It was twenty foot square, placed in the middle of the room. The superficies was composed of several bits of wood, about the bigness of a dye, but some larger than others. They were all linked together by slender wires. These bits of wood were covered on every square with paper pasted on them; and, on these papers were written all the words of their language in their several moods, tenses, and declensions, but without any order. The professor then desired me to observe, for he was going to set his engine at work. The pupils at his command took each of them hold of an iron handle, whereof there were forty fixed round the edges of the frame; and giving them a sudden turn, the whole disposition of words was entirely changed. He then commanded six and thirty of the lads to read the several lines softly as they appeared upon the frame; and where they found three or four words together that might make part of a sentence, they dictated to the four remaining boys who were scribes. This work was repeated three or four times, and at every turn the engine was so contrived, that the words shifted into new places, as the square bits of wood moved upside down.” (Jonathan Swift, Gulliver’s Travels, A Voyage to Balnibarbi) What astonishing forecast did Swift show in that narrative that, in spite of the underlying incredulity and irony, still clarifies our surprise when faced to what might seem to some of us just an abandonment of all that architects and designers have cherished: creativeness and inventiveness. Yet, we could argue that such a radical shift in paradigm occurred once when master builders left the construction ground and took seat at drafting boards. The whole body of design and construction knowledge was split into what now seem to us just specialties undertaken by more and more isolated professionals. That shift entailed new forms of representation and prediction which now each and all architects take for granted. Also, Cartesian space representation turned out to be the main instrument for professional practice, even if one can argue that it is not more than the unfolding of stone carving techniques that master builders and guilds were so fond of. Enter computing and all its unfolding, i.e. DNA coding, fractal geometry, generative computing, nonlinear dynamics, pattern generation and cellular automata, as a whole new chapter in science, and compare that to conical perspective, descriptive and analytical geometry and calculus, and an image begins to form, delineating a separation between architect and digital designer. In previous works, we have tried approaching the issues regarding architects education in a more consensual way. But it seems now that the whole curricular corpus might be changed as well. The very foundations upon which we prepare future professionals shall change, not only in College, but in High School as well. In this paper, we delve further into the disconnect between current curricula and digital design practices and suggest new disciplinary grounds for a new architectural education.
keywords	Educational paradigm; Design teaching; Design methods;
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	cf2011_p035
id	cf2011_p035
authors	Langenhan, Christoph; Weber Markus, Petzold Frank, Liwicki Marcus, Dengel Andreas
year	2011
title	Sketch-based Methods for Researching Building Layouts through the Semantic Fingerprint of Architecture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 85-102.
summary	The paper focuses on the early stages of the design process where the architect needs assistance in finding reference projects and describes different aspects of a concept for retrieving previous design solutions with similar layout characteristics. Such references are typically used to see how others have solved a similar architectural problem or simply for inspiration. Current electronic search methods use textual information rather than graphical information. The configuration of space and the relations between rooms are hard to represent using keywords, in fact transforming these spatial configurations into verbally expressed typologies tends to result in unclear and often imprecise descriptions of architecture. Nowadays, modern IT-technologies lead to fundamental changes during the process of designing buildings. Digital representations of architecture require suitable approaches to the storage, indexing and management of information as well as adequate retrieval methods. Traditionally planning information is represented in the form of floor plans, elevations, sections and textual descriptions. State of the art digital representations include renderings, computer aided design (CAD) and semantic information like Building Information Modelling (BIM) including 2D and 3D file formats such as Industry Foundation Classes (IFC) (IAI, 2010). In the paper, we examine the development of IT-technologies in the area of case-based reasoning (Richter et al., 2007) to provide a sketch-based submission and retrieval system for publishing and researching building layouts including their manipulation and subsequent use. The user interface focuses on specifying space and their relations by drawing them. This query style supports the spatial thinking approach that architects use, who often have a visual representation in mind without being able to provide an accurate description of the spatial configuration. The semantic fingerprint proposed by (Langenhan, 2008) is a description and query language for creating an index of floor plans to store meta-data about architecture, which can be used as signature for retrieving reference projects. The functional spaces, such as living room or kitchen and the relation among on another, are used to create a fingerprint. Furthermore, we propose a visual sketch-based interface (Weber et al., 2010) based on the Touch&Write paradigm (Liwicki et al., 2010) for the submission and the retrieval phase. During the submission process the architect is sketching the space-boundaries, space relations and functional coherence's. Using state of the art document analysis techniques, the architects are supported offering an automatic detection of room boundaries and their physical relations. During the retrieval the application will interpret the sketches of the architect and find reference projects based on a similarity based search utilizing the semantic fingerprint. By recommending reference projects, architects will be able to reuse collective experience which match the current requirements. The way of performing a search using a sketch as a query is a new way of thinking and working. The retrieval of 3D models based on a sketched shape are already realized in several domains. We already propose a step further, using the semantics of a spatial configuration. Observing the design process of buildings reveals that the initial design phase serves as the foundation for the quality of the later outcome. The sketch-based approach to access valuable information using the semantic fingerprint enables the user to digitally capture knowledge about architecture, to recover and reuse it in common-sense. Furthermore, automatically analysed fingerprints can put forward both commonly used as well as best practice projects. It will be possible to rate architecture according to the fingerprint of a building.
keywords	new media, case-based reasoning, ontology, semantic building design, sketch-based, knowledge management
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cdc2008_137
id	cdc2008_137
authors	Cardoso, Daniel
year	2008
title	Certain assumptions in Digital Design Culture: Design and the Automated Utopia
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 137-148
summary	Much of the research efforts in computational design for Architecture today aim to automate or bypass the production of construction documents as a means of freeing designers from the sticky and inconvenient contingencies of physical matter. This approach has yielded promising questions and applications, but is based on two related assumptions that often go unnoticed and that I wish to confront: 1. Designers are more creative if the simulations they rely on engage only with the superficial aspects of the objects they design (rather than with their structural and material-specific behaviors) and 2. The symbolic 3-D environments available in current design software are the ideal media for design because of their free nature as modeling spaces. These two assumptions are discussed both as cultural traits and in their relation to digital design technologies. The work presented is a step towards the far-sighted goal of answering the question: how can computation enable new kinds of dialogue between designer, design media and construction in a design process? In concrete, this paper proposes a critical framework for discussing contemporary digital design practices as a continuity –rather than as a rupture- of a long-standing tradition in architecture of separating design and construction.
email
last changed	2009/01/07 08:05

_id	b678
id	b678
authors	Loemker, Thorsten Michael
year	2008
title	Designing with machines
source	Proceedings of the Dresden International Symposium of Architecture 2005, Technische Universitaet Dresden, P. 225-229
summary	In 1845 Edgar Allan Poe wrote the poem “The Raven”. An act full of poetry, love, passion, mourning, melancholia and death. In his essay “The Theory of Composition” which was published in 1846 Poe proved that the poem is based on an accurate mathematical description. Not only in literature are structures present that are based on mathematics. In the work of famous musicians, artists or architects like Bach, Escher or Palladio it is evident that the beauty and clarity of their work as well as its traceability has often been reached through the use of intrinsic mathematic coherences. If suchlike structures could be described within architecture, their mathematical abstraction could supplement “The Theory of Composition” of a building. This research focuses on a basic approach to describe principles in architectural layout planning in the form of mathematical rules that will be executed by the use of a computer. Provided that “design” is in principle a combinatorial problem, i.e. a constraint-based search for an overall optimal solution of a design problem, an exemplary method will be described to solve those problems. Mathematical and syntactical difficulties that arise from the attempt to extract rules that relate to the process of building design will be pointed out. As a consequence for teachings it will be demonstrated which competences are needed in order to aid designing with machines.
series	other
type	normal paper
email
last changed	2008/10/13 14:20

_id	caadria2008_66_session6b_544
id	caadria2008_66_session6b_544
authors	Lowe, Russell
year	2008
title	Beyond the boundary object: sketches, computer games and blogs facilitating design development
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 544-551
doi	https://doi.org/10.52842/conf.caadria.2008.544
summary	Developing Frosts’ understanding of Leigh Star’s (Star 1989) concept of the boundary object this paper seeks to answer the question “would multiple boundary objects employed simultaneously facilitate design development?” The paper reflects on and critically reviews the design, implementation, and outcomes of a first year Architectural Design course that privileged architectural representation in the form of design sketches, blogs and contemporary computer gaming technology. The review process is supported by an in depth survey of students experiences both prior to and during the course. With a large number of students enrolled in the course (158) the findings from this survey can be seen to offer a statistical reliability which is in contrast to the more usual anecdotal approach.
keywords	Boundary Object, Generalist, Specialist, Sketch, Computer Game, Blog
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	acadia08_256
id	acadia08_256
authors	Ostwald, Michael J.; Josephine Vaughan; Stephan Chalup
year	2008
title	A Computational Analysis of Fractal Dimensions in the Architecture of Eileen Gray
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 256-263
doi	https://doi.org/10.52842/conf.acadia.2008.256
summary	This paper is the first investigation of the fractal dimensions of five of the house designs of Eileen Gray; a prominent architect working mainly in France between 1922 and 1956. In this paper, a computational variation of the “box-counting approach” (used to determine fractal dimension) is applied to a multi-dimensional review of the houses of Gray. As a contemporary of Le Corbusier, Gray is a significant architect for such an analysis. This research is important because it expands the set of examples of early Twentieth Century architects who have been analyzed using the method. This paper provides a computer-assisted mathematical analysis of characteristic visual complexity in five houses designs by Eileen Gray.
keywords	Algorithm; Analysis; Computation; Design; Environment
series	ACADIA
last changed	2022/06/07 08:00

_id	ecaade2011_058
id	ecaade2011_058
authors	Schindler, Christoph; Espinosa, Margarita Salmerón
year	2011
title	ZipShape Mouldless Bending II: A Shift from Geometry to Experience
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.477-484
doi	https://doi.org/10.52842/conf.ecaade.2011.477
wos	WOS:000335665500055
summary	“ZipShape is a universal method to fabricate single curved panels from any plain material without moulds” was the first statement of a paper presented at the Antwerp eCAADe conference in September 2008 (Schindler, 2008). In contrast, the paper at hand introduces ZipShape as a highly specific composite combining different materials and their characteristics. Between those two texts, a paradigm shift took place – from abstract geometrical concept to experiencing the inseparable relation of form and material behaviour. This second step of ZipShape-research was initiated by Swiss design office schindlersalmerón through several workshops with Fachschule für Holztechnik Hamburg, CITA at Royal Academy of the Fine Arts Copenhagen, Bern University of Applied Sciences BFH–AHB Biel and The Detmold School of Architecture and Interior Design.
keywords	Mouldless Bending; Wood; Parametric Modelling; Digital Fabrication; Unrolling
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ecaade2008_138
id	ecaade2008_138
authors	Sdegno, Alberto
year	2008
title	Palladio’s Bridges: Graphic Analysis and Digital Interpretations
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 43-50
doi	https://doi.org/10.52842/conf.ecaade.2008.043
summary	The paper presents some results of a research on the digital reconstruction of some bridges designed by Andrea Palladio. The use of new technologies has enabled us to investigate the morphology of every single element and to be compared each other. Using the method of video animation, we have analyzed some of them in order to simulate the human perception and to understand their spatial configuration, but also to visualize the point of view of a man crossing a river or a canal. The last step was to prepare the models for producing some physical maquettes with the technique of rapid prototyping that have enabled us to verify the quality of the digital construction. Some different kinds of powder were used to identify the best one for the representation of architecture.
keywords	Digital reconstruction, geometric analysis, unbuilt projects, video, rapid prototyping
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ddss2008-26
id	ddss2008-26
authors	Slager, C.T.J.; B. de Vries, A.K. Bregt and A.J. Jessurun
year	2008
title	Methodology to generate landscape configurations foruse in multi-actor plan-making processes
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	In this paper, we investigate an approach to generate landscape configurations for use in multi-actor plan-making processes. Using the information from predefined lot typologies, a heuristic allocation method, consisting of a suitability function and an allocation mechanism of lot components is explained. The suitability function is primarily based on adjacency and distance parameters as found in landscape design literature. The allocation mechanism starts from a random but constrained initial situation, and generates a plausible lot configuration by orderly swapping pairs of cells thereby increasing the overall suitability of the plan . From the results, the limitations of this approach are concluded and the concepts are presented for an improved landscape generation algorithm.
keywords	Landscape configurations, spatial allocation, Landscape grammar, Cellular automata, Genetic Algorithms, Simulated Annealing
series	DDSS
last changed	2008/09/01 17:06

_id	ddss2008-17
id	ddss2008-17
authors	Sun, Chengyu; Bauke de Vries and Qi Zhao
year	2008
title	Measure the Evacuees’ Preference on ArchitecturalCues by CAVE
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	An evacuees’ preference prediction function on architectural cues are described here as a crucial part of the evacuation model to simulate how the evacuees search the route to exit according to the architectural information in the public underground space. The model is developed to evaluate the egress design in the initial space design stage and to provide the existing compositive evacuation models a support on the usage of architectural information. First the over simplification on the architectural information in the existing evacuation models is discussed. Then a list of so-called architectural cues and the related evacuation model are introduced, in which the evacuees always egress to the seen or remembered architectural cue with the highest preference in every step. The emphasis of the paper is put on the analysis of the preference function including the CAVE-based conjoint analysis research method, the experiment design and implementation of the virtual drill, and the estimation of the parameters from the collected choices. The preference function for five architectural cue pairs, Doorway-Doorway, Stair-Stair, Exit- Exit, Doorway-Stair, Exit-Stair is built from the choice data of nearly one hundred Chinese subjects.
keywords	CAVE, evacuation, conjoint analysis
series	DDSS
last changed	2008/09/01 17:06

_id	acadia08_230
id	acadia08_230
authors	Tierney, Therese
year	2008
title	Network Morphologies: Neuronal Systems as Models for Relational Form Generation
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 230-237
doi	https://doi.org/10.52842/conf.acadia.2008.230
summary	Since the late 1990s, architectural form making has investigated advanced computation at the earliest stages of design through inductive analytic and algorithmic processes. This paper proposes a relational or contextual organization by analyzing existing networked models. It firstly presents a literature review regarding the development of networked models and then outlines the requirements for a conceptual prototype for future design applications.
keywords	Computation; Design; Generative; Morphogenesis; Neural Networks
series	ACADIA
last changed	2022/06/07 07:58

_id	cdc2008_171
id	cdc2008_171
authors	Tryfonidou, Katerina and Dimitris Gourdoukis
year	2008
title	What comes first: the chicken or the egg? Pattern Formation Models in Biology, Music and Design
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 171-178
summary	The popular saying that wonders if the egg is coming before the chicken or vice versa, implies a vicious circle where all the elements are known to us and the one is just succeeding the other in a totally predictable way. In this paper we will argue, using arguments from fields as diverse as experimental music and molecular biology, that development in architecture, with the help of computation, can escape such a repetitive motif. On the contrary, by employing stochastic processes and systems of self organization each new step can be a step into the unknown where predictability gives its place to unpredictability and controlled randomness.
email
last changed	2009/01/07 08:05

_id	cf2019_009
id	cf2019_009
authors	Veloso, Pedro; Jinmo Rhee and Ramesh Krishnamurti
year	2019
title	Multi-agent space planning: a literature review (2008-2017)
source	Ji-Hyun Lee (Eds.) "Hello, Culture!" [18th International Conference, CAAD Futures 2019, Proceedings / ISBN 978-89-89453-05-5] Daejeon, Korea, pp. 52-74
summary	In this paper we review the research on multi-agent space planning (MASP) during the period of 2008-2017. By MASP, we refer to space planning (SP) methods based on online mobile agents that map local perceptions to actions in the environment, generating spatial representation. We group two precedents and sixteen recent MASP prototypes into three categories: (1) agents as moving spatial units, (2) agents that occupy a space, and (3) agents that partition a space. In order to compare the prototypes, we identify the occurrence of features in terms of representation, objectives, and control procedures. Upon analysis of occurrences and correlations of features in the types, we present gaps and challenges for future MASP research. We point to the limits of current systems to solve spatial conflicts and to incorporate architectural knowledge. Finally, we suggest that behavioral learning offers a promising path for robust and autonomous MASP systems in the architectural domain.
keywords	Space planning; Agent-based modeling; Multi-agent systems; Generative systems
series	CAAD Futures
email
last changed	2019/07/29 14:08

_id	acadia08_066
id	acadia08_066
authors	Ahlquist, Sean; Moritz Fleischmann
year	2008
title	Material & Space: Synthesis Strategies based on Evolutionary Developmental Biology
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 66-71
doi	https://doi.org/10.52842/conf.acadia.2008.066
summary	A material system can be defined as a set of self-organized materials, defining a certain spatial arrangement. In architecture, this material arrangement acts as a threshold for space, though space often only appears as a by-product of the material organization. Treating space as a resulting, therefore secondary, independent product minimizes the capacity to generate architecture that is astutely aware of concerns of functionality, environment and energy. An effective arrangement of material can only be determined in relation to the spaces that it defines. When proposing a more critical approach, a material system can be seen as an intimate inter-connection and reciprocal exchange between the material construct and the spatial conditions. It is necessary to re-define material system as a system that coevolves spatial and material configurations through analysis of the resultant whole, in a process of integration and evaluation. ¶ With this understanding of material system comes an expansion in the number of criteria that are simultaneously engaged in the evolution of the design. The material characteristics, as well as the spatial components and forces (external and internal), are pressures onto the arrangement of material and space. ¶ This brings a high degree of complexity to the process. Biological systems are built on methods that resolve complex interactions through sets of simple yet extensible rules. Evolutionary Developmental Biology explains how growth is an interconnected process of external forces registering fitness into a fixed catalogue of morphological genetic tools. Translating the specific framework for biological growth into computational processes, allows the pursuit of an architecture that is fully informed by the interaction of space and material.
keywords	Biology; Computation; Material; Parametric; System
series	ACADIA
last changed	2022/06/07 07:54

_id	caadria2008_27_session3b_221
id	caadria2008_27_session3b_221
authors	Al-Haddad, Tristan
year	2008
title	Parametric modulations in Masonry
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 221-228
doi	https://doi.org/10.52842/conf.caadria.2008.221
summary	The focus of the research presented in this paper asks how a designer can create a flexible system of physical making which can accommodate multiple programmatic functions within a smooth whole, rather than creating an a priori singular formal object. This adaptable system of construction works through the development of an intelligent CAD model that can be mapped to a flexible manufacturing mechanism, i.e. a reconfigurable mold. This system of manufacturing can be used to cast totally unique solid modules without creating a unique mold for each part by manipulating the topological structure of the system. This approach takes the notion of mass-customization beyond the expensive and unsustainable one-offs that the design world has seen recently, and into a new paradigm of a sustainable, economically viable world of mass-customizable form and space.
keywords	Parametrics, Variability, Reconfigurability, UHPC, Topology, Molding, Casting
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia08_448
id	acadia08_448
authors	Alfaris, Anas; Riccardo Merello
year	2008
title	The Generative Multi-Performance Design System
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 448-457
doi	https://doi.org/10.52842/conf.acadia.2008.448
summary	This paper proposes a framework for an integrated computational design system. This design system builds on the strengths inherent in both generative synthesis models and multi-performance analysis and optimization. Four main design mechanisms and their mathematical models are discussed and their integration proposed. The process of building the design system begins by a top-down decomposition of a design concept. The different disciplines involved are decomposed into modules that simulate the respective design mechanisms. Subsequently through a bottom-up approach, the design modules are connected into a data flow network that includes clusters and subsystems. This network forms the Generative Multi-Performance Design System. This integrated system acts as a holistic structured functional unit that searches the design space for satisfactory solutions. The proposed design system is domain independent. Its potential will be demonstrated through a pilot project in which a multi-performance space planning problem is considered. The results are then discussed and analyzed.
keywords	Analysis; Behavior; Generative; Optimization; Performance
series	ACADIA
type	normal paper
last changed	2022/06/07 07:54

_id	caadria2008_3_session1a_029
id	caadria2008_3_session1a_029
authors	Ambrose, Michael A., Carl Lostritto, Luc Wilson
year	2008
title	Animate education Early Design Education Pedagogy
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 29-35
doi	https://doi.org/10.52842/conf.caadria.2008.029
summary	This paper presents a novel approach to the introduction and use of animation and motion graphics in foundation design education. Design inquiry and understanding as generated from, and translated by, movement is the focus. This work explores animation as a design methodology in the first weeks of architectural education. The proposed design exercise discussed here will probe the concept/context and spatial/visual literacy of the learned sense of space-time in architectural design education and representation. Here the digital application of animation and motion graphics is intended to be process driven to encourage students to find an attitude about solutions rather than a solution to the design project. The intention is to examine the relationship between form and space through a structured exploration of movement within a kit-of-parts design project that explores a three-dimensional spatial construct. Animation as a design method poses unique potentials and pitfalls. Animation and motion graphics, as a collection of instances, is both questioned and exaggerated. This project creates a threshold experience of learning that puts in motion an exploration of integrated digital process and design product.
keywords	Education, design theory, design studies, animation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2008_080
id	sigradi2008_080
authors	Andrés, Roberto
year	2008
title	Hybrid Art > Synthesized Architecture
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This paper investigates possible intersections between some contemporary artistic modalities and architectural practice. At first, it describes and discusses different uses of art in architectural history. Through the analyzes of Le Corbusier’s artistic and architectural practices, it observes the limits of looking at art as only ‘inspiration’ for architectural form and points to the necessity of surpassing this formal approach. More than bringing pictorial ‘inspiration’, art, as a experimental field, can change our architectural procedures and approaches - a much richer and powerful addition to the development of architecture. It discusses then, the confluence of architecture, information and communication technologies. Very commonly present in our contemporary life, not only on the making of architecture – computer drawings and modeling of extravagant buildings – nor in ‘automated rooms’ of the millionaire’s houses. Televisions, telephones and computers leave the walls of our houses “with as many holes as a Swiss cheese”, as Flusser has pointed. The architecture has historically manipulated the way people interact, but this interaction now has been greatly changed by new technologies. Since is inevitable to think the contemporary world without them, it is extreme urgent that architects start dealing with this whole universe in a creative way. Important changes in architecture occur after professionals start to research and experiment with different artistic medias, not limiting their visions to painting and sculpture. The main hypothesis of this paper is that the experiments with new media art can bring the field of architecture closer to information and communication technologies. This confluence can only take form when architects rise questions about technology based interaction and automation during their creative process, embodying these concepts into the architecture repertoire. An educational experience was conducted in 2007 at UFMG Architecture School, in Brazil, with the intention of this activity was to allow students to research creatively with both information technology and architecture. The students’ goal was to create site-specific interventions on the school building, using physical and digital devices. Finally, the paper contextualizes this experience with the discussion above exposed. Concluding with an exposition of the potentialities of some contemporary art modalities (specially the hybrid ones) in qualifying architectural practices.
keywords	Architecture; Information and Communication Technologies; Digital Art; Site Specific Art; Architectural Learning.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2016_450
id	sigradi2016_450
authors	Araujo, André L.; Celani, Gabriela
year	2016
title	Exploring Weaire-Phelan through Cellular Automata: A proposal for a structural variance-producing engine
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.710-714
summary	Complex forms and structures have always been highly valued in architecture, even much before the development of computers. Many architects and engineers have strived to develop structures that look very complex but at the same time are relatively simple to understand, calculate and build. A good example of this approach is the Beijing National Aquatics Centre design for the 2008 Olympic Games, also known as the Water Cube. This paper presents a proposal for a structural variance-producing engine using cellular automata (CA) techniques to produce complex structures based on Weaire-Phelan geometry. In other words, this research evaluates how generative and parametric design can be integrated with structural performance in order to enhance design flexibility and control in different stages of the design process. The method we propose was built in three groups of procedures: 1) we developed a method to generate several fits for the two Weaire-Phelan polyhedrons using CA computation techniques; 2) through the finite elements method, we codify the structural analysis outcomes to use them as inputs for the CA algorithm; 3) evaluation: we propose a framework to compare how the final outcomes deviate for the good solutions in terms of structural performance and rationalization of components. We are interested in knowing how the combination of the procedures could contribute to produce complex structures that are at the same time certain rational. The system developed allows the structural analysis of structured automatically generated by a generative system. However, some efficient solutions from the structural performance point of view do not necessarily represent a rational solution from the feasibility aspects.
keywords	Structural design; Complex structures; Bottom-up design approach
series	SIGRADI
email
last changed	2021/03/28 19:58

For more results click below: