Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 78

Reformat results as: short short into frame detailed detailed into frame

_id	cf2011_p108
id	cf2011_p108
authors	Iordanova, Ivanka; Forgues Daniel, Chiocchio François
year	2011
title	Creation of an Evolutive Conceptual Know-how Framework for Integrative Building Design
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 435-450.
summary	Low productivity of the building sector today is attributed to the fragmentation of tasks, disciplines and responsibilities, as well as to the resistance to adopt integrative work processes and digital means. The increased complexity of architectural projects and the aroused social consciousness for sustainable environment calls for integrative design collaboration. Thus, there is need for a Conceptual Framework combining work processes, technological means and policy aspects. According to the literature, integrative multidisciplinary design is a strategy resulting in high performance buildings nurturing sustainable way of living (Reed et al. 2009, Krygiel & Nies 2008). Responding to the increased technological complexity of our built environment, as well as to the objective of meeting multiple criteria of quality, both necessitating multidisciplinary collaboration during design, Building Information Modeling (BIM) is seen as a powerful means for fostering quality, augmenting productivity and decreasing loss in construction. Based on recent research, we can propose that a sustainable building can be designed through an integrative design process (IDP) which is best supported by BIM. However, our ongoing research program and consultations with advanced practitioners underscore a number of limitations. For example, a large portion of the interviewed professionals and construction stakeholders do not necessarily see a link between sustainable building, integrative design process and BIM, while in our opinion, their joint use augments the power of each of these approaches taken separately. Thus, there is an urgent necessity for the definition of an IDP-BIM framework, which could guide the building industry to sustainable results and better productivity. This paper defines such a framework, whose theoretical background lays on studies in social learning (activity theory and situated action theories). These theories suggest that learning and knowledge generation occurs mainly within a social process defined as an activity. This corresponds to the context in which the IDP-BIM framework will be used, its final objective being the transformation of building design practices. The proposed IDP-BIM framework is based on previous research and developments. Thus, firstly, IDP process was well formalized in the Roadmap for the Integrated Design Process‚ (Reed et al.) which is widely used as a guideline for collaborative integrative design by innovating practices in USA and Canada. Secondly, the National Building Information Modeling Standard (NBIMS) of the USA is putting an enormous effort in creating a BIM standard, Succar (2008) recently proposed a conceptual framework for BIM, but BIM ontology is still under development (Gursel et al 2009). Thirdly, an iterative design process bound to gating reviews (inspired from software development processes) was found to be successful in the context of multidisciplinary design studios (reported in our previous papers). The feedback from this study allowed for modifications and adjustments included in the present proposal. The gating process assures the good quality of the project and its compliance to the client's requirements. The challenge of this research is to map the above mentioned approaches, processes and technologies into the design process, thus creating an integrated framework supporting and nurturing sustainable design. The IDP-BIM framework can be represented by a multidimensional matrix linked to a semantic network knowledge database: - the axes of the matrix being the project timeline, the design process actors and building stakeholders (architect, engineers, client, contractor, environmental biologist, etc.), or different aspects of building performance (environmental, functional, social, interior environment quality, cost, etc.); and - the knowledge database providing multiple layers of semantic support in terms of process, domain knowledge, technology and workflow at a given moment of the project and for a given actor or building aspect. The IDP-BIM framework is created as an evolutive digital environment for know-how and will have an established protocol for regular updates. The paper will firstly present the state of the art in IDP and BIM. Secondly, it will expose the methodology used for the definition of the Framework, followed by a description of its structure, contents and digital implementation. Then, some scenarios for the use of the Framework will be shown as validation.
keywords	integrated design process, BIM, multidisciplinary design, conceptual framework
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2009_123
id	ecaade2009_123
authors	Achten, Henri; Beetz, Jakob
year	2009
title	What Happened to Collaborative Design?
doi	https://doi.org/10.52842/conf.ecaade.2009.357
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 357-366
summary	In this paper we present the results of a comprehensive literature survey on the development of collaborative design. We reviewed 324 papers on collaborative design, taken from various sources (conferences, journals, and PhD-theses). We grouped the papers based on common themes, and in that way derived a classification of themes through the last 25 years (1983-2008). Each category is described, its development, and key publications are identified.
wos	WOS:000334282200043
keywords	Collaborative design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2023_253
id	sigradi2023_253
authors	Cavalcanti, Isabella, Teixeira Mendes, Leticia and Albuquerque, Fernando
year	2023
title	From Modeling to Collective Digital Fabrication: Experience of the "Banco Cabaça"
source	García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 543–554
summary	This paper presents an experience of collective digital fabrication and parametric modeling of furniture made with recycled plastic waste, inspired by natural elements of the Brazilian northeast. In addition to conventional joinery techniques, we highlight the technologies of rapid prototyping (PR) and digital fabrication (FD) (Volpato, 2007, Pupo, 2008; Pupo, 2009); as tools that promote a paradigm shift, both in the design process and in production and materialization (Kolarevic, 2005), allowing recycled plastic to have new applications. We started with a brief review of digital fabrication processes in Brazil, emphasizing collaboration in design and execution. Then, we contain the recycling of plastic and the need for actions for its best destination. Finally, we present a sustainable and collaborative design experience: the modeling and digital fabrication of furniture, entirely produced from recycled plastic, called “Banco Cabaça”.
keywords	Sustainable Design, Digital fabrication, Collaborative process, Parametric modeling, Brazilian design.
series	SIGraDi
email
last changed	2024/03/08 14:07

_id	sigradi2009_2000
id	sigradi2009_2000
authors	Celani, Gabriela
year	2009
title	Enseñando diseño generativo: una experiencia didáctica [Teaching Generative Design: a Learning Experience]"
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	Este trabajo describe el seminario de Diseño Generativo ofrecido en el programa de posgrado en el área de Arquitectura y Construcción en la Universidad de Campinas en el primer semestre de 2008. El curso tuvo como objetivo introducir el tema de los métodos sistemáticos de generación de alternativas de diseño, como base para el desarrollo de sistemas de CAAD. El método pedagógico del curso estuvo compuesto por presentaciones teóricas, lecturas, discusiones, y ejercicios prácticos. Los sistemas generativos más conocidos fueron categorizados en dos grandes grupos: el de combinaciones de elementos (como la enumeración sistemática de combinaciones y los algoritmos genéticos) y el de los sistemas basados en reglas (como los fractales y la gramática de formas). Además de constituirse en una oportunidad para proponer una categorización de los principales sistemas generativos, el curso también permitió que se hiciera una reflexión sobre la importancia de la introducción de los sistemas generativos y de las técnicas de programación en los cursos de pre-grado y pos-grado.
keywords	Generative design systems; Theoretical basis of CAAD
series	SIGRADI
type	normal paper
email
last changed	2016/03/10 09:48

_id	sigradi2009_805
id	sigradi2009_805
authors	Gonçalves Costa, Luís Gustavo; Arivaldo Leão de Amorim
year	2009
title	Geração de Ortofotos para Produção de Mapas de Danos [Ortophoto creation for damage map production ]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	The present work integrates the ongoing Master Degree Research Project entitled "Damage Map Representation and Pathology Database (Cronidas) Creation". This paper aims to discuss the search for alternatives in the development of a map of damages to be applied on historical buildings in order to assist preservation and restoration projects. Orthophotos of the facades and of the internal walls of buildings will be produced; once generated, these images are vectorized and transformed in drawings which represent the pathologies, in other words, the damage map. The research the following softwares: PhotoModeler®Pro5 for the generation of the orthophotos, Photoshop®CS3 for image treatment, and AutoCAD®2008 for tracing the relevant areas.
keywords	damage map; conservation and restoration project; ortophoto; vectorization; building pathologies
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	sigradi2009_903
id	sigradi2009_903
authors	Harris, Ana Lúcia Nogueira de Camargo
year	2009
title	O Uso da Técnica dos "Planos em Série" com o Desenvolvimento da Computação Gráfica - Uma Experência Didática [The Use of the 'Serial Plan' Technique with the Development of the Computer Graphic - A Teaching Experience]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This paper is about comparative didactic experiences where the “Serial plan Technique” defined by Wong (1998), was applied in 2001 and 2008 which computer resources from that time. In 2001 this technique was applied with the help of AutoCAD for generation of the planifications, but in 2008 the appliances of AutoCAd and Sketch Up were used for the virtual construction of objects. The quality of the results showed a didactic potential and an increasement in the possible creative rhythm, mainly because the facility of the three-dimensional virtual visualization and because the speed in the physical execution of the created project.
keywords	didactic experiences; serial plan technique; CAD; AutoCAD; Skecht Up
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	sigradi2009_1085
id	sigradi2009_1085
authors	Herrera, Pablo C.
year	2009
title	Patrones y convenciones en el uso de Rhinoscripting [Patterns and Conventions in the Use of Rhinoscripting]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	Two exhibits made evident that complex shapes generated through scripts are the attention focus of both educators and professionals. These projects did not start with traditional representation conventions (front view, plan and cross section) but with biological, geometrical or mathematical references, where patterns are recurrent. Using scripts it is possible to write and represent possibilities; blogs allow the publication of the results. In this context, a blog was created (2008) to publish methods and subjects extracted from workshops and manuals featuring rhinoscripting. During a year more than 57000 users accessed; the results of this documentation are hereby presented.
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	ecaade2009_139
id	ecaade2009_139
authors	Knight, Michael; Dokonal, Wolfgang
year	2009
title	State of Affairs - Digital Architectural Design in Europe: A Look into into Education and Practice – Snapshot and Outlook
doi	https://doi.org/10.52842/conf.ecaade.2009.191
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 191-196
summary	This paper updates a research project that tries to take a snapshot on the use of computers in the average architectural firms in two European countries. Our main interest is to see whether the digital design methods are starting to have an impact in these offices. First results of this research using an online web questionnaire have been presented at the eCAADe 2007 conference in Frankfurt and have been updated and presented at the Sigradi 2008 conference in Havana. At the moment we are working with additional interviews and we are preparing a rerun of the questionnaire to have an idea about the current developments. This paper is still based mainly on the findings we presented at the Sigradi conference to bring this information to the eCAADe community as well. We will be presenting the results of the new questionnaire in Istanbul.
wos	WOS:000334282200023
keywords	Digital design, early stage design
series	eCAADe
email
last changed	2022/06/07 07:51

_id	sigradi2009_893
id	sigradi2009_893
authors	Kubicki, Sylvain; Annie Guerriero; Pierre Leclercq; Jean-Claude Bignon
year	2009
title	Cooperative design studios in education: Lessons learnt from two experiments
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This article describes experiments of IT-supported cooperation in AEC pedagogical context. The Digital Cooperative Studio (SDC) places students in a situation of distant design cooperation. This experiment allows students to be confronted to a cross-disciplinary approach of the architectural design and leads to the analysis of their own cooperation processes. Two editions of the Digital Cooperative Studio have been carried out in 2007-2008 and 2008-2009. This article presents the lessons learnt from these two experiments.
keywords	Virtual Design Studio; Cooperation; Education; AEC (Architecture, Engineering and Construction)
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	caadria2009_056
id	caadria2009_056
authors	Lee, Ya-Chieh; Ming-Chyuan Ho
year	2009
title	On The Design Communication of Cultural Image
doi	https://doi.org/10.52842/conf.caadria.2009.401
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 401-410
summary	In this era, people are no longer satisfied with standardized products. Designers need to implement unique product semantics to attract customers to buy the products. According to this reason, designers are developing a new design approach that puts cultural elements into their products so that they can make people reappreciate their own culture and history. The Olympics is a global event which involves various sport competitions. Before the Beijing Olympic Games, many host nations used to promote their culture through selling a variety of merchandise. It is the first time for the Olympic Games to take place in China which means that it is obviously the right timing to see cultural symbols of China in the merchandises created by the Chinese design team. These designs had introduced Chinese imageries to the whole world. As generally known, traditional culture of Taiwan actually took root from China. Taiwan owns the same ancient history and materials like China. This study explores the cultural identity and analyses the cultural design elements of China. The 2008 Beijing Olympic Games is taken as case study in this research, because it helps people think how to create new value from their own culture. Furthermore, this paper proposes some suggestions on how to create design which represents the image of Taiwan.
keywords	Aesthetics, cultural identity, image design
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	caadria2012_046
id	caadria2012_046
authors	Lertsithichai, Surapong
year	2012
title	Building Thailand's tallest Ganesh: CAD/CAM integration in conventional metal fabrication
doi	https://doi.org/10.52842/conf.caadria.2012.337
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 337–346
summary	Ganesh (Ganesa or Ganesha) is a Hindi god well known for his distinguishable elephant head and widely revered as the god of success or remover of obstacles. Patrons in Thailand have worshipped Ganesh and respected him by means of erecting statues of Ganesh in various poses and sizes throughout the country. In late 2008, the people of Chacheongsao, a province located East of Bangkok, decided to create Thailand’s tallest standing Ganesh statue made with bronze reaching heights up to 39 meters and situated on the Bangpakong river bank overseeing the city and its people. The author and design team was approached by representatives from Chacheongsao and commissioned to advise the process from conception to construction. The challenge started with seeking appropriate computer-aided design and manufacturing technologies and innovative processes to guide the design team throughout the production. The 0.60-meter bronze cast sculpture of the Ganesh was scanned using a 3D optical scanner to generate a solid model of the statue. A surface model was then extracted from the 3D model to firstly determine the most efficient structural support within the statue and secondly to generate surface strips for the foundry to create actual bronze casts. The construction of the project began early 2009 and the statue has since been erected from its base to currently its head. During construction, the author and design team has encountered several problems translating pixels to parts. Several errors have occurred during the mould and cast production process as well as construction errors on site causing mismatches of the structure and surface, misalignments, and protruding structural supports and joints. The lessons learned from this project is documented and analysed with hopes to create a more effective process for future projects with similar requirements.
keywords	CAD/CAM; 3D scanner; CNC milling; metal fabrication
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	sigradi2009_1129
id	sigradi2009_1129
authors	Matsubara, Juliana; Carlos V. Vaz; Gabriela Celani; Edison Fávero
year	2009
title	The miniature city: the use of rapid prototyping techniques to make urban scale models.
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	The aim of the present paper is to describe a case study about the production of scale models of large urban areas with the use of digital prototyping techniques. Throughout the year 2008, the Laboratory for Automation and Prototyping in Architecture and Construction (LAPAC) was commissioned with the production of a scale model of the State University of Campinas´ campus. Laser-cutting and Selective Laser Sintering were used to produce the terrain and the buildings. The products that resulted from this research demonstrate that rapid prototyping processes are extremely helpful to produce scale models of large urban areas.
keywords	Concept; scale model; process; digital prototyping
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	acadia16_140
id	acadia16_140
authors	Nejur, Andrei; Steinfeld, Kyle
year	2016
title	Ivy: Bringing a Weighted-Mesh Representations to Bear on Generative Architectural Design Applications
doi	https://doi.org/10.52842/conf.acadia.2016.140
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 140-151
summary	Mesh segmentation has become an important and well-researched topic in computational geometry in recent years (Agathos et al. 2008). As a result, a number of new approaches have been developed that have led to innovations in a diverse set of problems in computer graphics (CG) (Sharmir 2008). Specifically, a range of effective methods for the division of a mesh have recently been proposed, including by K-means (Shlafman et al. 2002), graph cuts (Golovinskiy and Funkhouser 2008; Katz and Tal 2003), hierarchical clustering (Garland et al. 2001; Gelfand and Guibas 2004; Golovinskiy and Funkhouser 2008), primitive fitting (Athene et al. 2004), random walks (Lai et al.), core extraction (Katz et al.) tubular multi-scale analysis (Mortara et al. 2004), spectral clustering (Liu and Zhang 2004), and critical point analysis (Lin et al. 20070, all of which depend upon a weighted graph representation, typically the dual of a given mesh (Sharmir 2008). While these approaches have been proven effective within the narrowly defined domains of application for which they have been developed (Chen 2009), they have not been brought to bear on wider classes of problems in fields outside of CG, specifically on problems relevant to generative architectural design. Given the widespread use of meshes and the utility of segmentation in GAD, by surveying the relevant and recently matured approaches to mesh segmentation in CG that share a common representation of the mesh dual, this paper identifies and takes steps to address a heretofore unrealized transfer of technology that would resolve a missed opportunity for both subject areas. Meshes are often employed by architectural designers for purposes that are distinct from and present a unique set of requirements in relation to similar applications that have enjoyed more focused study in computer science. This paper presents a survey of similar applications, including thin-sheet fabrication (Mitani and Suzuki 2004), rendering optimization (Garland et al. 2001), 3D mesh compression (Taubin et al. 1998), morphin (Shapira et al. 2008) and mesh simplification (Kalvin and Taylor 1996), and distinguish the requirements of these applications from those presented by GAD, including non-refinement in advance of the constraining of mesh geometry to planar-quad faces, and the ability to address a diversity of mesh features that may or may not be preserved. Following this survey of existing approaches and unmet needs, the authors assert that if a generalized framework for working with graph representations of meshes is developed, allowing for the interactive adjustment of edge weights, then the recent developments in mesh segmentation may be better brought to bear on GAD problems. This paper presents work toward the development of just such a framework, implemented as a plug-in for the visual programming environment Grasshopper.
keywords	tool-building, design simulation, fabrication, computation, megalith
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

_id	ascaad2009_emmanuel_ruffo
id	ascaad2009_emmanuel_ruffo
authors	Ruffo, Emmanuel
year	2009
title	Programming As an Evolutionary Concept for Architectural Education: From natural systems to computer science materialization to emergent and evolutionary embedded architectural design
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 47-59
summary	Logic and evolution in ontogenetic processes for Architectural design was the title for a summer program taught at the Escuela de Arquitectura of the Universidad Anahuac from June to July 2008 in the State of Mexico, Mexico. Every single result in architectural design follows logical steps enclosed in the design processes. These logical processes evolve through space-time sequences in order to generate a diversity of possible solutions. In Biology an ontogenetic process refers to the development of an individual organism, anatomical or behavioral feature from the earliest stage to maturity. Following this development criteria students were encouraged to understand the main logics of natural and physical systems through the aid of computer programming. These logics must be understood as tridimensional geometries digitally generated. Right from the beginning all processes generated during the explorations and investigations had to be visualized as integral design performances. The integral design system must embedded structure, function, form and material capacities through the aid of computer programming, digital fabrication technologies and material assembling techniques. It is important to note that final prototypes had to demonstrate the diversity of capacities of the whole system in order to automate the components in evolution.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	sigradi2009_1108
id	sigradi2009_1108
authors	Santos, Denise Mônaco dos; Marcelo Tramontano
year	2009
title	O projeto Comunidades_online: espacialidades híbridas sob uma perspectiva social [The Online_communities project: hybrid spacialities under a social perspective]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This article intends to present the development and the results of an experience about the interlacing information and communication technologies on local communities carried out by the Online_communities project, developed between 2004 and 2008 in Cidade Tiradentes, district of São Paulo. It’s about the elaboration of a critical examination of one interpretation of this project, among many possible, which privileges, on one hand, the links of the different aspects it covers, highlighting its actions which are very distinct. On the other hand, it is about creating hybrid spaces in urban fragments, considering them as spaces constituted from communication insertion through computational systems in communities geographically referred.
keywords	Hybrid spaces; Communities; Computational interfaces; Information and Communication Technologies; Digital inclusion
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	ijac20097303
id	ijac20097303
authors	Taron, Joshua M.
year	2009
title	Interactive Hemostasis Modeling in Urban Network Design
source	International Journal of Architectural Computing vol. 7 - no. 3,375-387
summary	This paper describes a type of project that images a city as it might exist given the integration of hemostatic procedures within pedestrian networks during emergencies requiring full-scale egress from an urban core. It articulates the steps taken to integrate a pre-existing C++ hemostasis model (C. Jacob, 2008) into Maya software in order to describe how the project operates on a computational level. By projecting these agent-based logics directly into/onto each pedestrian in the city (the smallest unit of the system), egress-oriented infrastructure can shift from being extensively predetermined in form (concrete barriers, metal railing, police barricades, etc.), to something more intensively defined, real-time, and locally on-demand. These procedures are situated within a larger schema based on the structural principles of Norbert Wiener's cybernetic feedback loops, that acknowledge and allow for hybrid (top-down + bottom-up) awareness and control within systems. The project attempts to ally itself with emerging forms of network design with similar structural typologies supported through the use of personal mobile devices (PMDs) in urban environments.
series	journal
last changed	2009/10/20 08:02

_id	sigradi2022_112
id	sigradi2022_112
authors	Toledo, Jimena
year	2022
title	The Role of Visual Platforms -visual Social Media- in the Creative Design Process
source	Herrera, PC, Dreifuss-Serrano, C, Gómez, P, Arris-Calderon, LF, Critical Appropriations - Proceedings of the XXVI Conference of the Iberoamerican Society of Digital Graphics (SIGraDi 2022), Universidad Peruana de Ciencias Aplicadas, Lima, 7-11 November 2022 , pp. 639–650
summary	In the current design practice, new digital tools have emerged -visual- also called Infrastructures (Perkel, 2011) such as; Behance 2003, Pinterest 2009, Archdaily 2008, Instagram (2010) -to cite the most recognized in the creative field in Argentina-, which promote different opportunities and support the creative process and problem solving, making it easier for designers to find inspiring material through the Internet. However, very little is known about how these new practices affect professional work, how they themselves see it and the tensions they generate.This article will present the results of a general survey applied to expert designers as part of the first stage of the Doctoral Research project. Which investigates the behavior referred specifically to the use of visual platforms -visual social media- in order to understand, characterize, describe the use and involvement of them within the design process.
keywords	Project processes - Creativity - Design process - Visual Social Media -Curatorial Practice
series	SIGraDi
email
last changed	2023/05/16 16:56

_id	ecaade2010_224
id	ecaade2010_224
authors	Trento, Armando; Fioravanti, Antonio; Loffreda, Gianluigi
year	2010
title	Ontologies for Cities of the Future: The quest of formalizing interaction rules of urban phenomena
doi	https://doi.org/10.52842/conf.ecaade.2010.797
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.797-804
summary	“A city can not be designed” Watanabe [1]: our ambition can be at the maximum to guide someway and in some part its growth. So as planners need tools to aid an open design with uncertain goals. This research group beginto develop such a tool at high level of abstraction (Fioravanti 2008), with theaim of investigating the potentiality of a collaboration among complementary research domains. The present work reports about early implementation results of an innovative approach developed by the authors, for representation of design knowledge. It has been identified in the Urban Design Ontology (Montenegro and Duarte 2009) some design entities and their internal relationships that have been formalized and visualized by means of an intuitive interface. As a matter of fact, this approach, by means of inference engines allows coherence’s check and constraint verification, pointing out incompatibility between initial design program and each partial specialist design solution and/or the overall shared one.
wos	WOS:000340629400085
keywords	Knowledge formalization; Urban design ontology; Knowledge structure; Collaborative design; Open design
series	eCAADe
email
last changed	2022/06/07 07:57

_id	cf2009_673
id	cf2009_673
authors	Tamke, Martin; Thomsen, Mette, Ramsgard
year	2009
title	Digital wood craft
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 673- 686
summary	In 1995, Robin Evans points out in his book The Projective Cast how the development of techniques changed architecture and the space inhabited in times of Gothic and early Renaissance. We see a parallel phenomenon today, where the interplay of technology and tool gives shape to new design (Kolarevic 2005). Yet in opposition to the interwoven fields of design and craft of the late Gothic, today’s building sector is enormously diversified, and a growing complexity in the building process and number of used materials can be observed. This gives an opposite point of departure into a more integrated field of design and innovation in architectural design and building industry.
keywords	Digital production, CAD/CAM, parametric design, complex form, mass customization
series	CAAD Futures
email
last changed	2009/06/08 20:53

For more results click below: