Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 593

Reformat results as: short short into frame detailed detailed into frame

_id	4c44
id	4c44
authors	Beirão, José; Duarte, José; Gil, Jorge; Montenegro, Nuno
year	2009
title	Monitoring urban design through generative design support tools: a generative grammar for Praia
source	Proceedings of 15 Congresso da APDR, Cidade da Praia, Cabo Verde.
summary	Abstract Urban planning and design has a considerable impact on the economic performance of cities and regions. It is a complex process that extends for a long period and involves many participants. The lack of integrated tools to support this process hampers the ability to maximize the response of plans to contextual conditions while using the least resources. This paper describes research that aims to develop such a tool, integrating formulation, generation, and evaluation capabilities. It is focused on the generation module which relies on the encoding of Urban Induction Patterns (UIP) using shape grammars. A grammar for the extension plan of the city of Praia is presented as one of the case studies used to support UIP definition and illustrate its application. The paper also discusses how the proposed tool can be used for developing and monitoring urban plans.
keywords	shape grammars; generative urban design; planning
series	other
type	normal paper
email
more	http://www.apdr.pt/congresso/2009/
last changed	2009/07/30 15:58

_id	ijac20097101
id	ijac20097101
authors	Boulaassal, H.; Landes, T.; Grussenmeyer, P.
year	2009
title	Automatic Extraction of Planar Clusters and their Contours on Building Facades Recorded by Terrestrial Laser Scanner
source	International Journal of Architectural Computing vol. 7 - no. 1, 1-20
summary	Since 3D city models need to be realistic not only from a bird's point of view, but also from a pedestrian's point of view, the interest in the generation of 3D façade models is increasing. This paper presents two successive algorithms for automatically segmenting building façades scanned by Terrestrial Laser Scanner (TLS) into planar clusters and extracting their contours. Since majority of façade components are planes, the topic of automatic extraction of planar features has been studied. The RANSAC algorithm has been chosen among numerous methods. It is a robust estimator frequently used to compute model parameters from a dataset containing outliers, as it occurs in TLS data. Nevertheless, the RANSAC algorithm has been improved in order to extract the most significant planar clusters describing the main features composing the building façades. Subsequently, a second algorithm has been developed for extracting the contours of these features. The innovative idea presented in this paper is the efficient way to detect the points composing the contours. In order to evaluate the performances of both algorithms, they have successively been applied on samples with different characteristics, i.e. densities, types of façades and size of architectural details. Finally, a quality evaluation based on the comparison of planar clusters and contours obtained manually has been carried out. The results prove that the proposed algorithms deliver qualitative as well as quantitative satisfactory results and confirm that both algorithms are reliable for the forthcoming 3D modelling of building façades.
series	journal
last changed	2009/06/23 08:07

_id	ascaad2009_mohamed_abdalla
id	ascaad2009_mohamed_abdalla
authors	Abdalla, Mohamed Saad Atia
year	2009
title	3D Model and Decision Support System for Fire Safety: A case study of Kingdom of Bahrain
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 419-430
summary	Fire agencies on all levels try hard to save lives, properties, and natural resources. Accurate access to critical information is essential in this regard, many agencies around the world have embraced GIS as a tool that helps them balance needs, uses, and hazards to promote sustainability of the environment while identifying and limiting vulnerability. At Kingdom of Bahrain, Ministry of interior established the Geographic Security System (GSS) to enhance the emergency response. The 3D of the GSS Consisted of 3 main parts: (1) 3D for terrain model, (2) 3D model for entire targeted zones, and (3) 3D models for individual buildings. In this paper, the integration between GSS system and 3D model will be illustrated, and how this kind of integration could enhance decision support system (DSS) for fire safety at kingdom of Bahrain. On other hand, we will highlight the technical and legislation difficulties faced in this project. Also, the future steps to enhance DSS will be discussed.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ascaad2009_wael_abdelhameed
id	ascaad2009_wael_abdelhameed
authors	Abdelhameed, Wael
year	2009
title	Assessment of a Physical Planning Project through Virtual Reality: A case study
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 365-378
summary	The study reports an application of VR models in the assessment of a part of physical planning project. The project outputs were different reports, GIS data and maps, and CAD drawings. The GIS data were used to create the VR models by importing Shpfiles of the GIS project outputs to VR software. The study presents VR models and the assessment of the physical planning project in terms of: 1) effect of the population increase, 2) effect of the required residential units, and 3) quality assurance for the current situation and future situation. The method used to build up the VR Models was through satellite images (by Google Earth Pro) and VR software (by UC Win/Road). Different models were built up to visualize and assess the alternative solutions and various influential factors. The study employed Virtual Reality in various urban and planning problems through models that are employed as tools of communication and design. The visualized environment and the associated models facilitated the evaluation of important areas, namely: impact of different factors and alternative solutions. The study concludes that the processes, such as decision making, visualization and representation, performed through VR manifest its importance to different design phases of urban and physical planning.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ascaad2009_mai_abdelsalam
id	ascaad2009_mai_abdelsalam
authors	Abdelsalam, Mai
year	2009
title	The Use of the Smart Geometry through Various Design Processes: Using the programming platform (parametric features) and generative components
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 297-304
summary	The emergence of parametric generative design tools and prototyping manufacturing technology led to radical changes in architectural morphologies. This change increased the opportunity to develop innovative smart geometries. Integrating these algorithms in the parametric softwares led to variations in building design concepts increasing alternatives and decreasing the repetitive work previously needed in conventional CAD software. The chosen software in this research is Generative Components (GC). It is a software design tool for an associative and parametric design platform. It is tested for using Global Variables with associative functions during the concept creation and form GC comprises features. The results presented in this research may be considered an introduction to the smart geometry revolution. It deals with the generative design which applied in the design process from conceptual design phase, defining the problem, exploring design solutions, then how to develop the design phases. Office building is a building type which encourages new forms that needs computational processes to deal with repetitive functions and modular spaces and enclosed in a flexible creative structural skin. Generative design helps the office buildings to be arranged, analysed, and optimized using parameters in early stages in design process. By the end of the research, the use of the smart geometry in a high rise office building is defined and explained. The research is divided into three parts, first a summary of the basic theories of office buildings design and the sustainable requirements that affect it, and should be integrated. Secondly, the previous experiences in generating office buildings by Norman foster and Sergio Araya. At last, a case study is proposed to test and evaluate the use of the parametric generative methodology in designing an office building with specific emphasis on the function, environmental aspects and form generation using Generative Components (GC) Software.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	acadia09_30
id	acadia09_30
authors	Aish, Robert
year	2009
title	Tools of Expression: Notation and Interaction for Design Computation
doi	https://doi.org/10.52842/conf.acadia.2009.030
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 30-31
summary	Design considers function, fabrication, and aesthetics collectively. Computation is beginning to affect the competitive dynamics of design. Using algorithms, designers are exploring forms that are essentially “undrawable,” even with advanced modeling and direct manipulation techniques. Determining the appropriate functional characteristics may require the application of increasingly complex structural- and environmental-performance analysis techniques. To realize physically a design may require further geometric analysis and rationalization, and the use of complex computer-controlled fabrication techniques.
keywords	Design, Computation, Form Finding, Design logic
series	ACADIA
type	Keynote paper
email
last changed	2022/06/07 07:54

_id	sigradi2009_1000
id	sigradi2009_1000
authors	Albuquerque, Mércia de Assis; Mônica Moura
year	2009
title	O Design de Informação na Web 2.0: A interface Resultante de uma Construção Coletiva [Design Information Web 2.0: the interface result of a collective construction]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	We will address the challenges of design information in designing interfaces and functional dynamics considering a content part of the collaboration of users whose commitment to the project reaches various levels. The use of a well-structured iconography and the availability of help, shortcuts and tutorials are some of the resources already exploited, however, there is still room for reflection on the use of visuals and sounds aimed at facilitating the navigability on such projects. Here are some important details that must be considered by examining models of existing applications.
keywords	Design; Information; Interface; Hypermedia
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2009_890
id	sigradi2009_890
authors	Almeida, Fábio de
year	2009
title	Documentação e Comunicação Digital do Patrimônio Arquitetônico Moderno: Centro Técnico de Aeronáutica – CTA [Documentation and Communication Digital Architectural Heritage Classic: Aerospace Technical Center - CTA]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This paper intends to contribute for the analysis of the digital representation applied for documentation, communication and diffusion of architecture as cultural heritage, more specifically the production and communication of informations about buildings and sites of modern movement, arguing the possibilities and limits of this instrumental for the best understanding, recognition, evaluation and diffusion of the architecture on a historiographical perspective. As studies of cases, were selected buildings of an important technical center of aeronautic of Brazil, the CTA (Centro Técnico de Aeronáutica) in São José dos Campos, State of São Paulo.
keywords	surveying and reconstruction; Digital Heritage; Modern Movement
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2009_124
id	ecaade2009_124
authors	Beirão, José Nuno; Duarte, José Pinto; Stouffs, Rudi
year	2009
title	An Urban Grammar for Praia: Towards Generic Shape Grammars for Urban Design
doi	https://doi.org/10.52842/conf.ecaade.2009.575
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 575-584
summary	This paper presents a shape grammar for planned urban spaces intending an implementation for generative urban design. This implementation will form part of an urban design support tool defined to formulate, generate and evaluate urban designs. The goal is to formulate urban program descriptions according to context conditions using a description grammar and generate alternative design solutions using a shape grammar. The generation is guided by several evaluation processes performed by an evaluation module. In this paper we are focusing on the definition of the generic shape grammar using an existent urban plan as a case study. The aim is to encode the design moves of the urban designer into generic grammar rules amenable for specific instantiations through the customization of rule parameters.
wos	WOS:000334282200069
keywords	Shape grammars, patterns, generative urban design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadia09_82
id	acadia09_82
authors	Bitonti, Francis
year	2009
title	Computational Tectonics
doi	https://doi.org/10.52842/conf.acadia.2009.082
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 82-89
summary	The goal of this research is to define a methodology for the construction of complex non-repeating surfaces and structures that rely on the formulation of a singular tectonic mechanism. Computational systems like cellular automata seem to suggest that it might be possible for modular material systems to self-assemble into complex organizations. A single series of modular parts could be capable of producing not only complex behavior, but also, depending on initial conditions, simple periodic behavior. The research outlined in this paper uses simple geometric transformations to produce tectonic computers that can be applied to a variety of building systems. This paper outlines a methodology for encoding and decoding material assemblages as discrete computational systems. Exploiting the combinatorial nature of tectonic systems makes it possible to produce a population of “material algorithms” capable of exhibiting a wide range of behaviors. Encoding assemblages as discrete systems affords the designer the ability to enumerate and search all possible permutations of a tectonic system. In this paper, we will discuss the calculations and computational processes used to encode material assemblages as populations of discrete algorithms.
keywords	Fabrication, modular system, structure, enumeration systems, material algorithms
series	ACADIA
type	Normal paper
email
last changed	2022/06/07 07:52

_id	sigradi2009_651
id	sigradi2009_651
authors	Braga, Gisele Pinna
year	2009
title	O uso do Blog na formação do arquiteto na era digital [Use of Blogs in architectural education in the digital age]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	The digital age provides us many interactive tools from which we can develop our knowledge. Most of them are used daily by students and have a great impact in their lives. In this context, blogs appear as a tool with a great potential for education since students are used to read them. This article describes the experience of the use of a blog (Blog da Pinna) focused on architecture, technology and innovation, to enhance education for architecture students. It also shows the evaluation of this use and reflects about the achievements.
keywords	Blog; Educação; Arquitetura; Tecnologia; Inovação
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ijac20097401
id	ijac20097401
authors	Bueno, Ernesto
year	2009
title	Algorithmic Form Generation of a Radiolarian Pavilion
source	International Journal of Architectural Computing vol. 7 - no. 4, 677-688
summary	This paper describes the design stage of an on-going research project for the construction of a pavilion that mimics the bone structures of Radiolarians. In the process, several constructive and generative algorithms are developed, together with geometric and trigonometric functions, all implemented in RhinoScript and a math plug-in for the NURBS modeler Rhinoceros. There has been considerable emphasis on the generation of the Radiolarian cell that is tessellated along a stereographic surface with a honeycomb-based algorithm. It combines design strategies from biomimetics, mathematical functions, generative scripting, process automation and versioning, all integrated into an algorithmic methodology for creating a non-standard structure, capable of being manufactured with CNC technology, and doing so, setting a precedent in the academic and professional environment in which it will be located.
series	journal
last changed	2010/09/06 08:02

_id	ijac202119302
id	ijac202119302
authors	BuHamdan, Samer; Alwisy, Aladdin; Bouferguene, Ahmed
year	2021
title	Generative systems in the architecture, engineering and construction industry: A systematic review and analysis
source	International Journal of Architectural Computing 2021, Vol. 19 - no. 3, 226–249
summary	Researchers have been extensively exploring the employment of generative systems to support design practices in the architecture, engineering and construction industry since the 1970s. More than half a century passed since the first architecture, engineering and construction industry’s generative systems were developed; researchers have achieved remarkable leaps backed by advances in computing power and algorithms’ capacity. In this article, we present a systematic analysis of the literature published between 2009 and 2019 on the utilization of generative systems in the design practices of the architecture, engineering and construction industry. The present research studies present trends, collaborations and applications of generative systems in the architecture, engineering and construction industry in order to identify existing shortcomings and potential advancements that balance the need for theory development and practical application. It provides insightful observations that are translated into meaningful recommendations for future research necessary to progress the incorporation of generative systems into the design practices of the architecture, engineering and construction industry.
keywords	Generative systems, architecture, engineering and construction industry, performative design, generative design, systematic literature review, future directions
series	journal
email
last changed	2024/04/17 14:29

_id	sigradi2009_773
id	sigradi2009_773
authors	Carniel, Denize Regina; José Luis Farinatti Aymone
year	2009
title	Desenvolvimento virtual e visualização de produtos a partir de banco de dados e modelagem 3D [Virtual development and product visualization with database and 3D modeling ]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This article presents a methodology for product virtual development using a developed database application and virtual reality technology VRML (Virtual Reality Modeling Language) for final product visualization. To do that, information technology and communication in industry, virtual reality and computational resources for concept and prototyping are investigated. An example of product assembly is presented to illustrate the methodology proposed.
keywords	Information Technology and Communication; Virtual Prototyping; Virtual Reality; VRML; Database
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	cf2011_p135
id	cf2011_p135
authors	Chen Rui, Irene; Schnabel Marc Aurel
year	2011
title	Multi-touch - the future of design interaction
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 557-572.
summary	The next major revolution for design is to bring the natural user interaction into design activities. Graphical User Interfaces (GUI) brought a new approach that was more effective compared to their conventional predecessors. In recent years, Natural User Interfaces (NUI) have advanced user experiences and multi-touch and gesture technologies provide new opportunities for a variety of potential uses in design. Much attention has been paid to leverage in the design of interactive interfaces. The mouse input and desktop screen metaphors limit the information sharing for multiple users and also delayed the direct interaction for communication between each other. This paper proposes the innovative method by integrating game engine ‘Unity3D’ with multi-touch tangible interfaces. Unity3D provides a game development tool as part of its application package that has been designed to let users to focus on creating new games. However, it does not limit the usage of area to design additional game scenarios since the benefits of Unity3D is allowing users to build 3D environments with its customizable and easy to use editor, graphical pipelines to openGL (http://unity3d.com/, 2010 ). It creates Virtual Reality (VR) environments which can simulates places in the real world, as well as the virtual environments helping architects and designers to vividly represent their design concepts through 3D visualizations, and interactive media installations in a detailed multi-sensory experience. Stereoscopic displays advanced their spatial ability while solving issues to design e.g. urban spaces. The paper presents how a multi-touch tabletop can be used for these design collaboration and communication tasks. By using natural gestures, designers can now communicate and share their ideas by manipulating the same reference simultaneously using their own input simultaneously. Further studies showed that 3Dl forms are perceived and understood more readily through haptic and proprioceptive perception of tangible representations than through visual representation alone (Gillet et al, 2005). Based on the authors’ framework presented at the last CAADFutures, the benefits of integrating 3D visualization and tactile sensory can be illustrated in this platform (Chen and Wang, 2009), For instance, more than one designer can manipulate the 3D geometry objects on tabletop directly and can communicate successfully their ideas freely without having to waiting for the next person response. It made the work more effective which increases the overall efficiency. Designers can also collect the real-time data by any change they make instantly. The possibilities of Uniy3D make designing very flexible and fun, it is deeply engaging and expressive. Furthermore, the unity3D is revolutionizing the game development industry, its breakthrough development platform for creating highly interactive 3D content on the web (http://unity3d.com/ , 2010) or similar to the interface of modern multimedia devices such as the iPhone, therefore it allows the designers to work remotely in a collaborative way to integrate the design process by using the individual mobile devices while interacting design in a common platform. In design activities, people create an external representation of a domain, often of their own ideas and understanding. This platform helps learners to make their ideas concrete and explicit, and once externalized, subsequently they reflect upon their work how well it sits the real situation. The paper demonstrates how this tabletop innovatively replaces the typical desktop metaphor. In summary, the paper addresses two major issues through samples of collaborative design: firstly presenting aspects of learners’ interactions with physical objects, whereby tangible interfaces enables them constructing expressive representations passively (Marshall, 2007), while focussing on other tasks; and secondly showing how this novel design tool allows designers to actively create constructions that might not be possible with conventional media.
keywords	Multi-touch tabletop, Tangible User Interface
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2009_112
id	caadria2009_112
authors	Chen, Pei-Lin; Jen Yen
year	2009
title	A Color Combination Knowledge-Based System for Designer
doi	https://doi.org/10.52842/conf.caadria.2009.737
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 737-745
summary	The purpose of this paper is to investigate colour combination tools of visual communication designers’ need. Participants were twentythree students of Visual Communication Design Graduate School to follow the questionnaire survey and seven students of Design Doctoral Program Graduate School to follow the interview survey. The findings display that visual communication designers seldom use web-based colour combination systems. Based on the findings, we developed a colour combination support system: the adobe illustrator plug-in to proof this hypothesis. The databases of the tool use the book of “colour combination charts”, and the tool of this paper provides a personal database.
keywords	Colour; colour image; colour set; colour combination
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	sigradi2009_1019
id	sigradi2009_1019
authors	Christakou, Evangelos Dimitrios; Neander Furtado Silva
year	2009
title	Da Perspectiva Artificialis ao Cyberespaço: Motor Gráfico e a Visualisação Interativa da Luz Natural no Interior do Edificio [From perspectiva artificialis to cyberspace: Game-engine and the interactive visualization of the natural light in the interior of the building]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	In order to support the conceptual design, the architect used throughout the years, mockups - scaled physical models - or perspective drawings that intended to predict architectural ambience before its effective construction. This paper studies the real time interactive visualization, focused on one of most important aspects inside building space: the natural light. Although the majority of physically-based algorithms currently existing was designed for the synthesis of static images which may not take into account how to rebuild the scene - in real time - when the user is doing experiments to change certain properties of design.
keywords	omputer simulation; computer visualization; Natural Light; real-time interactivity
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	cf2009_472
id	cf2009_472
authors	Ciblac, Thierry
year	2009
title	L’analyse dimensionnelle comme aide à l’optimisation en phase de conception architecturale: applications à des cas de structures; Dimensional analysis as support toward optimization in architectural conception phase: applications to structural cases
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 472- 486
summary	One of the research ways carried out in the ARIAM-LAREA laboratory aims at giving to architects computing tools for early evaluation of structures. A particular approach uses dimensional analysis and similitude properties in order to define parameter variation laws. Such laws are illustrated by analytical cases using the theory of strength of materials. For complex structures, a heuristic is proposed to give indications of parameter variation influence on mechanical behavior. Some applications are presented for early determination of structural size and limit values, using computations by finite element method.
keywords	Structure, design, dimensional analysis, similitude
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	acadia09_201
id	acadia09_201
authors	De Kestelier, Xavier; Buswell, Richard
year	2009
title	A Digital Design Environment for Large- Scale Rapid Manufacturing
doi	https://doi.org/10.52842/conf.acadia.2009.201
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 201-208
summary	Innovation in architectural design often follows technological innovation. This innovation can often be related to advances in construction techniques or design tools. This paper focuses on the development of a digital design environment for a new manufacturing process that can produce large architectural components. The design environment can be customized so that it incorporates both the flexibility and the constraints of the construction technology, such that the components produced maximize the core concept of the technology. Rapid Prototyping is a mature technology that has been around for 25 years in the manufacturing and product design industries. It is used primarily to speed up the product design cycle time from concept to physical realization for evaluation; it is now gaining a foothold in contemporary architectural practice. A number of protagonists are taking the Rapid Prototyping concept a stage further by developing large-scale processes capable of printing architectural components; there are even claims of the ability to produce whole buildings. These processes will give the architect a new palette of choice in terms of component design, and promise similar levels of geometric freedom as the Rapid Prototyping counterparts.
keywords	Rapid prototyping, fabrication, hardware, concrete printing
series	ACADIA
type	Normal paper
email
last changed	2022/06/07 07:55

For more results click below: