Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 593

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2009_mohamed_abdalla
id	ascaad2009_mohamed_abdalla
authors	Abdalla, Mohamed Saad Atia
year	2009
title	3D Model and Decision Support System for Fire Safety: A case study of Kingdom of Bahrain
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 419-430
summary	Fire agencies on all levels try hard to save lives, properties, and natural resources. Accurate access to critical information is essential in this regard, many agencies around the world have embraced GIS as a tool that helps them balance needs, uses, and hazards to promote sustainability of the environment while identifying and limiting vulnerability. At Kingdom of Bahrain, Ministry of interior established the Geographic Security System (GSS) to enhance the emergency response. The 3D of the GSS Consisted of 3 main parts: (1) 3D for terrain model, (2) 3D model for entire targeted zones, and (3) 3D models for individual buildings. In this paper, the integration between GSS system and 3D model will be illustrated, and how this kind of integration could enhance decision support system (DSS) for fire safety at kingdom of Bahrain. On other hand, we will highlight the technical and legislation difficulties faced in this project. Also, the future steps to enhance DSS will be discussed.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ecaade2009_002
id	ecaade2009_002
authors	Choo, Seung Yeon; Heo, Kyu Souk; Seo, Ji Hyo; Kang, Min Soo
year	2009
title	Augmented Reality- Effective Assistance for Interior Design: Focus on Tangible AR Study
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 649-656
doi	https://doi.org/10.52842/conf.ecaade.2009.649
wos	WOS:000334282200078
summary	This article presents an application of Augmented Reality technology for interior design. Plus, an Educational Interior Design Project is reviewed. Along with the dramatic progress of digital technology, virtual information techniques are also required for architectural projects. Thus, the new technology of Augmented Reality offers many advantages for digital design and construction fields. AR is also being considered as a new design approach for interior design. In an AR environment, virtual furniture can be displayed and modified in real-time on the screen, allowing the user to have an interactive experience with the virtual furniture in a real-world environment. Finally, this study proposes a new method for applying AR technology to interior design work, where a user can view virtual furniture and communicate with 3D virtual furniture data using a dynamic and flexible user interface. Plus, all the properties of the virtual furniture can be adjusted using occlusion based interaction methods for a Tangible Augmented Reality.
keywords	Interior design, augmented reality, ARToolKit, tangible AR, interactive augmented reality
series	eCAADe
email
last changed	2022/06/07 07:56

_id	cf2009_472
id	cf2009_472
authors	Ciblac, Thierry
year	2009
title	L’analyse dimensionnelle comme aide à l’optimisation en phase de conception architecturale: applications à des cas de structures; Dimensional analysis as support toward optimization in architectural conception phase: applications to structural cases
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 472- 486
summary	One of the research ways carried out in the ARIAM-LAREA laboratory aims at giving to architects computing tools for early evaluation of structures. A particular approach uses dimensional analysis and similitude properties in order to define parameter variation laws. Such laws are illustrated by analytical cases using the theory of strength of materials. For complex structures, a heuristic is proposed to give indications of parameter variation influence on mechanical behavior. Some applications are presented for early determination of structural size and limit values, using computations by finite element method.
keywords	Structure, design, dimensional analysis, similitude
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	ecaade2009_021
id	ecaade2009_021
authors	Fleischmann, Moritz; Ahlquist, Sean
year	2009
title	Cylindrical Mesh Morphologies: Study of Computational Meshes based on Parameters of Force, Material, and Space for the Design of Tension-Active Structures
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 39-46
doi	https://doi.org/10.52842/conf.ecaade.2009.039
wos	WOS:000334282200003
summary	In experimenting with digital processes for simulating the behavior of tension-active cable nets, a method was developed for creating informed geometries by utilizing computational meshes that carry properties of structure, space, and material. A spring-based particle system provided the dynamics to simulate the flow of tension force through the geometry. Particular functions were scripted to embed logics for fabrication and analysis of spatial parameters. This formulated a lightweight, reactive design tool for which multiple cable net morphologies could be quickly generated. This paper will describe the experiments in creating the method to generate such cable net morphologies, and discuss the potential application for this computational framework to apply to other architectural systems.
keywords	Computation, particle system, spring, dynamic relaxation, processing, fabrication
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2009_129
id	ecaade2009_129
authors	Hemmerling, Marco
year	2009
title	Twister: An Integral Approach towards Digital Design and Construction
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 299-304
doi	https://doi.org/10.52842/conf.ecaade.2009.299
wos	WOS:000334282200036
summary	The paper outlines the relevance of computational geometry within the design and production process of architecture. Based on the case study “Twister”, the digital chain - from the initial form-finding to the final realization of spatial concepts - is discussed in relation to geometric principles. The association with the fascinating complexity, which can be found in nature and its underlying geometry was the starting point for the project presented in the paper. The translation of geometric principles into a three-dimensional digital design model was followed by a process of transformation and optimization of the initial shape, that integrated aesthetic, spatial and structural qualities as well as aspects of material properties and conditions of production.
keywords	Geometry, 3D modeling, rapid prototyping, photogrammetry, digital fabrication
series	eCAADe
email
last changed	2022/06/07 07:49

_id	cf2009_443
id	cf2009_443
authors	Juchmes, Roland; Delfosse, Vincent; Safin, Stéphane and Leclercq, Pierre
year	2009
title	Spécification géométrique des concepts architecturaux dans le cadre de la thermique du bâtiment; Geometrical specification of architectural concepts in the context of building’s thermodynamics
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 443-457
summary	This study is interested in the attribution of technological properties to geometrical elements in a 3D architectural modeler. We propose an original method based on the principle of semantic groupings of faces by geometrical requests. We describe the method and the results of interviews led with architects to identify the relevant groupings, then we list the simple geometrical requests developed within the modeler for the selection of these groupings and we report the efficiency of the method on a case. We conclude by the benefits and limits of our method.
keywords	3D modeling, semantic grouping, geometric requests, building physics
series	CAAD Futures
type	normal paper
email
last changed	2009/06/09 07:13

_id	cf2009_410
id	cf2009_410
authors	Abdelhameed, Wael
year	2009
title	Reciprocal relationship of conceptualization and design problem definition: A proposed approach for an architectural design studio
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 410-422
summary	This research paper proposes an approach to be applied in the design studio. The proposed approach highlights the reciprocal relationship between concept articulation and design problem definition in a design method that exposes different design activities related to this relationship. The design method was applied in a design studio of an intermediate level. The study reports the analysis of student designs in terms of the deign method employed. Moreover, a survey was carried out in order to measure the responses of students and instructors regarding the design method and its approach. The main structure of the design method proposed can be described as follows: although the relationship of concept articulation and design-problem definition are reciprocal, the influence of one direction can be distinguished more than of the other direction on different design activities. The research using qualitative and quantitative methodologies analyzes the results and outputs of the theoretical investigations, the practical application in the design studio, and the questionnaire responses through different methodological tools.
keywords	Conceptual design, design method, architectural design studio
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	caadria2009_031
id	caadria2009_031
authors	Abdelhameed, Wael
year	2009
title	Cognition Model in Conceptual Designing
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 771-780
doi	https://doi.org/10.52842/conf.caadria.2009.771
summary	Both design researchers and cognitive scientists have developed various process models to study human creative behaviour in design. The models developed are often based on observations of design processes and analysis of design protocols. This research paper reports the-stateof- the-art in the area of cognition models that present design activities in conceptual designing. The research paper investigates the approaches of these cognition models. A new approach of a cognition activity model in conceptual designing is proposed. The new approach used in the introduced model takes into the account factors and activities that are related to the external environment of design (design medium). The external environment has an important role in the cognition activities and the evaluation process in a way that can hardly be ignored or neglected. The presented model of cognition activities in conceptual designing highlights two main factors employed in all the iteration loops of the model, namely: media use and representation. Case studies of architecture students’ designs have been analyzed. The analysis of these case studies helped in forming the proposed model. Various results have been concluded and reported.
keywords	Cognition model; conceptual designing; design process; design theory
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	cf2009_273
id	cf2009_273
authors	Abdelmohsen, Sherif M. and Do, Ellen Yi-Luen
year	2009
title	Analysing the significance of problem solving expertise and computational tool proficiency in design ideation
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 273-287
summary	This paper presents a pilot study to analyze the role of problem solving expertise (PSE) and computational tool proficiency (CTP) of expert and novice architects in the ideation process within a distributed cognition environment. To analyze PSE, we studied the frequency of occurrence of unique problem solving tasks per limited commitment mode (LCM) revisit. We also devised a quantitative measure for analyzing CTP based on the frequency of unique and normally distributed modeling activities per design process flows for a parametric modeling tool. In our study that involved freehand sketching and parametric modeling as two external representations used in the ideation process, we concluded that expert architects have higher levels of both PSE and CTP than novices.
keywords	Problem solving, distributed cognition, design ideation, parametric modeling, freehand sketching
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	ascaad2009_mai_abdelsalam
id	ascaad2009_mai_abdelsalam
authors	Abdelsalam, Mai
year	2009
title	The Use of the Smart Geometry through Various Design Processes: Using the programming platform (parametric features) and generative components
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 297-304
summary	The emergence of parametric generative design tools and prototyping manufacturing technology led to radical changes in architectural morphologies. This change increased the opportunity to develop innovative smart geometries. Integrating these algorithms in the parametric softwares led to variations in building design concepts increasing alternatives and decreasing the repetitive work previously needed in conventional CAD software. The chosen software in this research is Generative Components (GC). It is a software design tool for an associative and parametric design platform. It is tested for using Global Variables with associative functions during the concept creation and form GC comprises features. The results presented in this research may be considered an introduction to the smart geometry revolution. It deals with the generative design which applied in the design process from conceptual design phase, defining the problem, exploring design solutions, then how to develop the design phases. Office building is a building type which encourages new forms that needs computational processes to deal with repetitive functions and modular spaces and enclosed in a flexible creative structural skin. Generative design helps the office buildings to be arranged, analysed, and optimized using parameters in early stages in design process. By the end of the research, the use of the smart geometry in a high rise office building is defined and explained. The research is divided into three parts, first a summary of the basic theories of office buildings design and the sustainable requirements that affect it, and should be integrated. Secondly, the previous experiences in generating office buildings by Norman foster and Sergio Araya. At last, a case study is proposed to test and evaluate the use of the parametric generative methodology in designing an office building with specific emphasis on the function, environmental aspects and form generation using Generative Components (GC) Software.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ecaade2009_170
id	ecaade2009_170
authors	Alaçam Aslan, Sema; Çagdas, Gülen
year	2009
title	Comparison of Designers’ Modeling Approaches During Architectural Design Process
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 753-758
doi	https://doi.org/10.52842/conf.ecaade.2009.753
wos	WOS:000334282200091
summary	This study has been started as a part of a research, related to exploring impact of novel interfaces during collaborative architectural design process on designers’ way of thinking. However, in this paper it is intended to focus on how the input devices reflect on designers’ modeling behavior in computer environment. Therefore it is intended to compare designer’s modeling approaches in computer environment via a case study. Four master students in architectural design computing graduate program have attended to the case study. The findings of the case study is presented and evaluated in the discussion section.
keywords	Architectural modeling, design interface, interactive techniques, human-computer interaction
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

_id	sigradi2009_693
id	sigradi2009_693
authors	Alves, Gilfranco Medeiros
year	2009
title	O desenho analógico e o desenho digital: a representação do projeto arquitetônico influenciado pelo uso do computador e as possíveis mudanças no proceso projetivo em arquitetura [Analogical design and digital design in architectural projects]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	The use of specific computer softwares for architecture design have been analyzed and allowed researchers in this matter to consider a change in architectural creation method realizing new possibilities in the way they project. Based on our experience as architectural project teacher we can observe that more and more students project and present projects with their drawings produced by computer. This tools changing envolves other changings in the project manners as we can notice in some architects that dawn in contemporary scene. This study wants to understand this changings in the projecting practice of Architecture and Urbanism students, and architects.
keywords	Design; Architectural Project; Digital Environment
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2009_854
id	sigradi2009_854
authors	Antoniazzi, Asdrubal; Airton Cattani; Jaqueline Viel Caberlon Pedoni
year	2009
title	Procedimentos metodológicos para simulação computacional de ambientes históricos [Methodological procedures for computer simulation of historical surroundings]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This study aims to present a classification of methodological procedures for using computer programmes to simulate architectural historical heritage. Produced for a Master’s Degree dissertation in Architecture, the methodology was developed based on several analyses of applications, possibilities and restrictions, with the assistance of photogrammetric reconstruction and several computer-graphics programmes. The files generated enable production of animations recording the changes experienced by buildings at various historical periods. These procedures were applied to the simulation of several buildings around the Praça Dante Alighieri in the centre of Caxias do Sul, Rio Grande do Sul, demonstrating their appropriateness and effectiveness and also showing the potential of computer-simulation resources for the historical environment, both educationally and in appreciation of architectural heritage.
keywords	Three-dimensional geometric modelling; Computer simulation; Digital reconstruction; Historical environment
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2009_137
id	caadria2009_137
authors	Baerlecken, Daniel; Judith Reitz
year	2009
title	Combinatorial Productivity
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 761-770
doi	https://doi.org/10.52842/conf.caadria.2009.761
summary	The paper investigates knotting techniques as a method for generating wall systems. The essential matter of the paper is to demonstrate the potential of knotted, algorithmic architecture through different research studies, which share the knotting of linear elements as a common methodology for design development. Combinatorial Productivity implies that by combining linear elements hidden properties of a system emerge and thereby the system becomes productive.
keywords	Generative Design; Design methodology; Parametric Form Generation; Knot Theory; Scripting
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2010_043
id	caadria2010_043
authors	Barker, Tom and M. Hank Haeusler
year	2010
title	Urban digital media: facilitating the intersection between science, the arts and culture in the arena of technology and building
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 457-466
doi	https://doi.org/10.52842/conf.caadria.2010.457
summary	The research presented in this paper investigates ways of providing better design applications for technologies in the field of Urban Digital Media (UDM). The work takes an emergent approach, evolving a design strategy through the early engagement of stakeholders. The paper discusses research in a design-led creative intersection between media technology, culture and the arts in the built environment. The case study discusses opportunities for the enhancement of a university campus experience, learning culture and community, through the provision of an integrated digital presence within campus architecture and urban spaces. It considers types of information architecture (Manovich, 2001) and designs for use in urban settings to create communication-rich, advanced and interactive designed spaces (Haeusler, 2009). The presented research investigates how to create a strategy for display technologies and networked communications to transform and augment the constructed reality of the built environment, allowing new formats of media activity.
keywords	Urban design; outdoor digital media; information architecture; multidisciplinary design; augmented reality; media facades
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2009_124
id	ecaade2009_124
authors	Beirão, José Nuno; Duarte, José Pinto; Stouffs, Rudi
year	2009
title	An Urban Grammar for Praia: Towards Generic Shape Grammars for Urban Design
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 575-584
doi	https://doi.org/10.52842/conf.ecaade.2009.575
wos	WOS:000334282200069
summary	This paper presents a shape grammar for planned urban spaces intending an implementation for generative urban design. This implementation will form part of an urban design support tool defined to formulate, generate and evaluate urban designs. The goal is to formulate urban program descriptions according to context conditions using a description grammar and generate alternative design solutions using a shape grammar. The generation is guided by several evaluation processes performed by an evaluation module. In this paper we are focusing on the definition of the generic shape grammar using an existent urban plan as a case study. The aim is to encode the design moves of the urban designer into generic grammar rules amenable for specific instantiations through the customization of rule parameters.
keywords	Shape grammars, patterns, generative urban design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cf2009_314
id	cf2009_314
authors	Boerner, Andrea; Maquil, Valérie
year	2009
title	Enhancing synergies between computer science and urban disciplines: Semi-automated applications for tangible user interfaces, a case study
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 314-327
summary	This paper explores an interdisciplinary design approach for coupling semi-automated applications with tangible user interfaces. It describes communication methods based on parameters and diagrams, between computer scientists and urban, architectural professionals and the matching abilities to give meaning to the various parts and elements of the system. By means of the development of two rule based applications it exploits different degrees of automation and kinds of feedback possibilities and its impact on discourse and decision making. It discusses design methods for interactive urban planning applications, which integrate the different requirements and benefits from both disciplines.
keywords	Tangible user interfaces, semi-automation, decision making, urban planning
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	acadia09_234
id	acadia09_234
authors	Cantrell, Bradley E.; Yates, Natalie A.
year	2009
title	Abstraction Language: Digital/ Analog Dialogues
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 234-239
doi	https://doi.org/10.52842/conf.acadia.2009.234
summary	The connection between biological systems and machines is quickly becoming an important factor in designing the built environment. This paper explores the model of abstraction languages as a method to create communications between biological and mechanical systems, focusing on modes accessible to design professionals. The development of data and control abstraction in programming is explored in order to develop linkages between physical systems and digital interfaces. This examination looks at current methods of data conveyance for the built environment, and at pushing beyond these current methods to suggest a method of abstraction. The researchers are particularly interested in the ability of abstraction to compress ecological/biological complexity into accessible modules for responsive environments.
keywords	Abstraction, synthesis, processing, biological systems, responsive design
series	ACADIA
type	Normal paper
email
last changed	2022/06/07 07:54

_id	sigradi2009_964
id	sigradi2009_964
authors	Castriota, Leonardo Barci; Rezende
year	2009
title	Fotografia digital e imagens multi-perspectivas no estudo de sítios históricos [Digital photography and multi-perspective image in the study of historical sities]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	The creation of panoramic images for depicting urban landscape is a technique that has its origins in Antiquity. These images, which are known to represent large urban areas from multiple views, can be considered true works of art. Recently there has been a growing interest by some researchers, especially in the area of computer graphics, in the production of multi-perspective images for representing historic sites. However, the focus of these studies has been especially the computational aspects of this process, and there are few studies that address the impact and possibilities of these methodologies in historic preservation and urban planning. Realizing this shortcoming and considering the demand for a perspective more connected to cultural heritage, our proposal is to associate the excellent visual results of the multi-perspective images to the rich possibilities of computer simulation that can provide digital photography. The fact is that in recent years we have experienced technological innovations in the field of computer simulation that far exceeded our expectations. While most surveys of buildings are still based on the use of tape measure, pencil, paper and camera, the computer has become increasingly the main interface between the user and the information and is now the preferred instrument for the production and viewing of images, including the creation of virtual environments. Thus, this work seeks to explore the great potential which seems to exist in the combination of digital photography and the technique of multi-perspective image representation, which may provide new approaches and perspectives for the field of historic preservation. For that, we present a rapid and low cost methodology, developed in recent years, which generates orthophotos and metric multi-perspective images, useful for the analysis of built heritage and historic sites. In addition to that, we will also discuss further possible byproducts of this methodology, among which we could highlight the creation of three-dimensional models, and the analysis of building pathologies in combination with thermal photography. As a case study, we will present a representation of the Rua dos Caetés, a listed historic district in Belo Horizonte (MG), Brazil.
keywords	Photogametry; Digital Photography; Heritage; Conservation
series	SIGRADI
email
last changed	2016/03/10 09:48

For more results click below: