Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 592

Reformat results as: short short into frame detailed detailed into frame

_id	acadia18_216
id	acadia18_216
authors	Ahrens, Chandler; Chamberlain, Roger; Mitchell, Scott; Barnstorff, Adam
year	2018
title	Catoptric Surface
doi	https://doi.org/10.52842/conf.acadia.2018.216
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 216-225
summary	The Catoptric Surface research project explores methods of reflecting daylight through a building envelope to form an image-based pattern of light on the interior environment. This research investigates the generation of atmospheric effects from daylighting projected onto architectural surfaces within a built environment in an attempt to amplify or reduce spatial perception. The mapping of variable organizations of light onto existing or new surfaces creates a condition where the perception of space does not rely on form alone. This condition creates a visual effect of a formless atmosphere and affects the way people use the space. Often the desired quantity and quality of daylight varies due to factors such as physiological differences due to age or the types of tasks people perform (Lechner 2009). Yet the dominant mode of thought toward the use of daylighting tends to promote a homogeneous environment, in that the resulting lighting level is the same throughout a space. This research project questions the desire for uniform lighting levels in favor of variegated and heterogeneous conditions. The main objective of this research is the production of a unique facade system that is capable of dynamically redirecting daylight to key locations deep within a building. Mirrors in a vertical array are individually adjusted via stepper motors in order to reflect more or less intense daylight into the interior space according to sun position and an image-based map. The image-based approach provides a way to specifically target lighting conditions, atmospheric effects, and the perception of space.
keywords	full paper, non-production robotics, representation + perception, performance + simulation, building technologies
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	ascaad2009_michael_ambrose
id	ascaad2009_michael_ambrose
authors	Ambrose, Michael A.
year	2009
title	Spatial and Temporal Sequence: Film, animation and design theory - toward a constructed morphology
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 165-176
summary	This paper presents an investigation of film, space, form and motion to expose issues of spatial perception. The objective is to use a brief moment of constructed moving imagery (a film scene) as the vehicle to develop a spatial/temporal sequence. The design research focuses on an examination of the procedure or process constructed by the director/cinematographer. The changing position of the camera continually changes the relationship of the frame to the viewed context. The project asks the student to interpret the spatial and temporal transformation, through the continual oscillation between foreground and background, in an effort to unravel the pretext of the singular point of view to reveal the intention of the filmmaker. The project discussed here focuses on a relationship between the projection of space in architectural representation and the production of space through complex geometries relative to temporal discontinuities and the way in which they agitate and alter one another. Drawing topological relationships between of the paths, or trajectories of movement, within a proposed scene of a film is the vehicle for investigation in this project. An event or configuration complete in itself, but forming part of the larger collection, is modelled and transformed to suggest various structural and temporal definitions with respect to spatial portrayal through the composition of time and the cinematic frame. In particular, spatial animation of a sequence of framed condition was to be explored in the development of a spatial episode.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	acadia21_444
id	acadia21_444
authors	Crawford, Assia
year	2021
title	Mitochondrial Matrix
doi	https://doi.org/10.52842/conf.acadia.2021.444
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 444-453.
summary	The following project was created as part of an art residency with the Wellcome Centre for Mitochondrial Research (WCMR) at Newcastle University. The WCMR specializes in leading-edge research into mitochondrial disease, investigating causes, treatments, and ways of avoiding hereditary transmission. Mitochondria is believed to have started off as a separate species that through symbiosis came to be the powerhouse of each cell in our bodies (Hird 2009). Mitochondrial disease is a genetic disorder that is caused by genetic mutations of the DNA of the mitochondria or the cell that in turn affects the mitochondria (Bolano 2018). Mitochondria is a hereditary condition and can affect people at different stages in their lives. It can affect various organs and has a link to various types of conditions. Therefore, the patient experience is unique to each individual and the elusive nature of the condition can make it particularly challenging due to the complexity of the disorder as well as the inaccessible scale on which these variations occur (Chinnery 2014)
series	ACADIA
type	project
email
last changed	2023/10/22 12:06

_id	acadia16_140
id	acadia16_140
authors	Nejur, Andrei; Steinfeld, Kyle
year	2016
title	Ivy: Bringing a Weighted-Mesh Representations to Bear on Generative Architectural Design Applications
doi	https://doi.org/10.52842/conf.acadia.2016.140
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 140-151
summary	Mesh segmentation has become an important and well-researched topic in computational geometry in recent years (Agathos et al. 2008). As a result, a number of new approaches have been developed that have led to innovations in a diverse set of problems in computer graphics (CG) (Sharmir 2008). Specifically, a range of effective methods for the division of a mesh have recently been proposed, including by K-means (Shlafman et al. 2002), graph cuts (Golovinskiy and Funkhouser 2008; Katz and Tal 2003), hierarchical clustering (Garland et al. 2001; Gelfand and Guibas 2004; Golovinskiy and Funkhouser 2008), primitive fitting (Athene et al. 2004), random walks (Lai et al.), core extraction (Katz et al.) tubular multi-scale analysis (Mortara et al. 2004), spectral clustering (Liu and Zhang 2004), and critical point analysis (Lin et al. 20070, all of which depend upon a weighted graph representation, typically the dual of a given mesh (Sharmir 2008). While these approaches have been proven effective within the narrowly defined domains of application for which they have been developed (Chen 2009), they have not been brought to bear on wider classes of problems in fields outside of CG, specifically on problems relevant to generative architectural design. Given the widespread use of meshes and the utility of segmentation in GAD, by surveying the relevant and recently matured approaches to mesh segmentation in CG that share a common representation of the mesh dual, this paper identifies and takes steps to address a heretofore unrealized transfer of technology that would resolve a missed opportunity for both subject areas. Meshes are often employed by architectural designers for purposes that are distinct from and present a unique set of requirements in relation to similar applications that have enjoyed more focused study in computer science. This paper presents a survey of similar applications, including thin-sheet fabrication (Mitani and Suzuki 2004), rendering optimization (Garland et al. 2001), 3D mesh compression (Taubin et al. 1998), morphin (Shapira et al. 2008) and mesh simplification (Kalvin and Taylor 1996), and distinguish the requirements of these applications from those presented by GAD, including non-refinement in advance of the constraining of mesh geometry to planar-quad faces, and the ability to address a diversity of mesh features that may or may not be preserved. Following this survey of existing approaches and unmet needs, the authors assert that if a generalized framework for working with graph representations of meshes is developed, allowing for the interactive adjustment of edge weights, then the recent developments in mesh segmentation may be better brought to bear on GAD problems. This paper presents work toward the development of just such a framework, implemented as a plug-in for the visual programming environment Grasshopper.
keywords	tool-building, design simulation, fabrication, computation, megalith
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

_id	caadria2009_031
id	caadria2009_031
authors	Abdelhameed, Wael
year	2009
title	Cognition Model in Conceptual Designing
doi	https://doi.org/10.52842/conf.caadria.2009.771
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 771-780
summary	Both design researchers and cognitive scientists have developed various process models to study human creative behaviour in design. The models developed are often based on observations of design processes and analysis of design protocols. This research paper reports the-stateof- the-art in the area of cognition models that present design activities in conceptual designing. The research paper investigates the approaches of these cognition models. A new approach of a cognition activity model in conceptual designing is proposed. The new approach used in the introduced model takes into the account factors and activities that are related to the external environment of design (design medium). The external environment has an important role in the cognition activities and the evaluation process in a way that can hardly be ignored or neglected. The presented model of cognition activities in conceptual designing highlights two main factors employed in all the iteration loops of the model, namely: media use and representation. Case studies of architecture students’ designs have been analyzed. The analysis of these case studies helped in forming the proposed model. Various results have been concluded and reported.
keywords	Cognition model; conceptual designing; design process; design theory
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ascaad2009_a_al_attili
id	ascaad2009_a_al_attili
authors	Al-Attili, A. and M. Androulaki
year	2009
title	Architectural Abstraction and Representation: The embodied familiarity of digital space
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 305-321
summary	This paper argues that familiarity is the tool that enables the understanding of space abstraction and representation. Familiarity in this context is independent from embodied interaction, and is crudely based on the connection between the various similar images of space; in this particular case, virtual space. Our investigation into the nature of human interaction with space, its abstraction and its representation is based on the critical contrast between the outcomes of interaction with two virtual versions of a physical reality; the first version is a non-linear interactive graphical abstraction of the space where no assertions or indicators are given as to whether or not there is a relationship between the abstraction and its physical reality, whereas the second is a none-linear interactive 3D virtual environment clearly representing the physical space in question. The paper utilises qualitative methods of investigation in order to gain an insight into human embodied experience in space, its abstraction and representation.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ascaad2014_023
id	ascaad2014_023
authors	Al-Maiyah, Sura and Hisham Elkadi
year	2014
title	Assessing the Use of Advanced Daylight Simulation Modelling Tools in Enhancing the Student Learning Experience
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 303-313
summary	In architecture schools, where the ‘studio culture’ lies at the heart of students’ learning, taught courses, particularly technology ones, are often seen as secondary or supplementary units. Successful delivery of such courses, where students can act effectively, be motivated and engaged, is a rather demanding task requiring careful planning and the use of various teaching styles. A recent challenge that faces architecture education today, and subsequently influences the way technology courses are being designed, is the growing trend in practice towards environmentally responsive design and the need for graduates with new skills in sustainable construction and urban ecology (HEFCE’s consultation document, 2005). This article presents the role of innovative simulation modelling tools in the enhancement of the student learning experience and professional development. Reference is made to a teaching practice that has recently been applied at Portsmouth School of Architecture in the United Kingdom and piloted at Deakin University in Australia. The work focuses on the structure and delivery of one of the two main technology units in the second year architecture programme that underwent two main phases of revision during the academic years 2009/10 and 2010/11. The article examines the inclusion of advanced daylight simulation modelling tools in the unit programme, and measures the effectiveness of enhancing its delivery as a key component of the curriculum on the student learning experience. A main objective of the work was to explain whether or not the introduction of a simulation modelling component, and the later improvement of its integration with the course programme and assessment, has contributed to a better learning experience and level of engagement. Student feedback and the grade distribution pattern over the last three academic years were collected and analyzed. The analysis of student feedback on the revised modelling component showed a positive influence on the learning experience and level of satisfaction and engagement. An improvement in student performance was also recorded over the last two academic years and following the implementation of new assessment design.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	acadia17_102
id	acadia17_102
authors	Aparicio, German
year	2017
title	Data-Insight-Driven Project Delivery: Approach to Accelerated Project Delivery Using Data Analytics, Data Mining and Data Visualization
doi	https://doi.org/10.52842/conf.acadia.2017.102
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 102-109
summary	Today, 98% of megaprojects face cost overruns or delays. The average cost increase is 80% and the average slippage is 20 months behind schedule (McKinsey 2015). It is becoming increasingly challenging to efficiently support the scale, complexity and ambition of these projects. Simultaneously, project data is being captured at growing rates. We continue to capture more data on a project than ever before. Total data captured back in 2009 in the construction industry reached over 51 petabytes, or 51 million gigabytes (Mckinsey 2016). It is becoming increasingly necessary to develop new ways to leverage our project data to better manage the complexity on our projects and allow the many stakeholders to make better more informed decisions. This paper focuses on utilizing advances in data mining, data analytics and data visualization as means to extract project information from massive datasets in a timely fashion to assist in making key informed decisions for project delivery. As part of this paper, we present an innovative new use of these technologies as applied to a large-scale infrastructural megaproject, to deliver a set of over 4,000 construction documents in a six-month period that has the potential to dramatically transform our industry and the way we deliver projects in the future. This paper describes a framework used to measure production performance as part of any project’s set of project controls for accelerated project delivery.
keywords	design methods; information processing; data mining; big data; data visualization
series	ACADIA
email
last changed	2022/06/07 07:55

_id	ascaad2016_013
id	ascaad2016_013
authors	Belkis Öksüz, Elif
year	2016
title	Parametricism for Urban Aesthetics - A flawless order behind chaos or an over-design of complexity
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 105-112
summary	Over the last decade, paradigm shifts in the philosophy of space-time relations, the change from space-time to spatio-temporality, caused significant changes in the design field, and introduced new variations and discourses for parametric approaches in architecture. Among all the discourses, parametricism is likely the most spectacular one. The founder of parametricism, Patrik Schumacher (2009) describes it as “a new style,” which has “the superior capacity to articulate programmatic complexity;” and “aesthetically, it is the elegance of ordered complexity in the sense of seamless fluidity.” In its theoretical background, Schumacher (2011) affiliates this style with the philosophy of autopoiesis, the philosophy that stands between making and becoming. Additionally, parametricism concerns not only the physical geometry in making of form; but also discusses the relational and causal aspects in becoming of form. In other words, it brings the aesthetic qualities in making through the topological intelligence behind becoming. Regarding that, parametricism seems an effective way of managing /creating complex topologies in form-related issues. However, when it comes to practice, there are some challenging points of parametricism in large-scale design studies. Thus, this work underlines that the dominance of elegance for urban planning has the potential of limiting the flexible and dynamic topology of the urban context, and objectifying the whole complex urban form as an over-designed product. For an aesthetic inquiry into urban parametricism, this paper highlights the challenging issues behind the aesthetic premises of parametricism at the urban design scale. For that, Kartal Master Plan Design Proposal by Zaha Hadid Architects (2006) will be discussed as an exemplary work.
series	ASCAAD
email
last changed	2017/05/25 13:31

_id	acadia09_98
id	acadia09_98
authors	Bennett, Ed
year	2009
title	ArtBus: A Minimal Bus and Protocol for Distributed Interfacing in Art and Design
doi	https://doi.org/10.52842/conf.acadia.2009.098
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 98-104
summary	ArtBus is a protocol and hardware bus for interfacing computers to sensors and actuators. It is a distributed interface, meaning that different parts of an ArtBus system can be at different locations in a space. ArtBus devices can be made on any embedded platform or microcontroller. While unconventional in some ways, ArtBus makes use of engineering design inspired by long established supervisory control and laboratory instrumentation practice. At the same time it is a simple, flexible interface which should be viable into the next generation of media devices and embedded control.
keywords	Hardware, sensor, interactive design, media
series	ACADIA
type	Normal paper
email
last changed	2022/06/07 07:54

_id	96d8
id	96d8
authors	Booth, Peter; Loo, Stephen
year	2009
title	Beyond Equilibrium: Sustainable Digital Design
source	Sustainable theory/ theorizing sustainability Proceedings from the 5th International Conference of the Association of Architecture Victoria University, New Zealand, 4-5 September 2009
summary	Implicit in current understandings of sustainability is the presence of a closed system with the capacity of equilibration. Sustainable practices, including design practices, are therefore assumed to possess a redemptive role: design is deployed (as environmentally sustainable design, etc.) to change habits, develop new technologies and recover marginalized practices in the hope of righting the balance between the environment and human endeavours. Recent developments in experimental digital design have demonstrated non‐linear and highly complex relations between topological transformations, material change, and the temporal dimension of forces. More importantly, this method of design is bottom‐up, because it does not rely on design solutions presaged by conventions, or restricted by representation, but is emergent within the performance of computational design itself. We argue that digital design processes need to move beyond the flux of determinates and solutions in equilibrium, towards a radically continuous but consistent production, which is in effect, an expression of sustainable pedagogy. The role of emergent digital techniques has significant impact on the methods in which computation is utilized within both practice and academic environments. This paper outlines a digital design studio on sustainability at the University of Tasmania, Australia that uses parametric modelling, digital performance testing, and topological morphology, concomitant with actual material fabrication, as a potent mode of collaborative design studio practice towards a sustainable design pedagogy.
keywords	digital, computation, process, morphogenesis.
series	other
type	normal paper
email
last changed	2009/09/08 23:21

_id	ascaad2009_andrea_cammarata
id	ascaad2009_andrea_cammarata
authors	Cammarata, Andrea
year	2009
title	Rebuilding Architecture: An analysis and critical investigation practice
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 121-134
summary	The Cooperative Design Environment Laboratory (CoDE Lab) is carrying out a research with students, trainees and seniors who have previously participated to CAAD-assisted design courses. These courses were developed with the aim of making participants independent from the pre-analytical phase project to the renderings of the final artifact. The programs that have been used so far are Autodesk Revit, Graphisoft Archicad and Nemetschek Allplan.The teaching workgroup has always believed that analyzing, deconstructing and reconstructing the architecture teaches much in terms of understanding. If the process is done correctly, it entirely re-traces the creative dynamics developed by the original designer. Subsequently, the educational practice is to choose a notable architectural work, designed and/or created by a Master of architecture, and to reproduce it in all details: aesthetical-formal, morphological, technological, structural, modular, etc. The final result is an archive of well-developed reconstructed models of great specific interest. The students on the other hand thoroughly learn how to control the tools and all BIM planning procedures.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ascaad2009_tellef_dannevig
id	ascaad2009_tellef_dannevig
authors	Dannevig, Tellef; Jostein Akre Thorvaldsen and Ramzi Hassan
year	2009
title	Immersive Virtual Reality in Landscape Planning
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 349-364
summary	In Norway there has been an increased focus on participatory planning the latter years. The public is now supposed to be included in the planning process. The documents which the public have access to usually consists of the project`s technical drawings. In some cases, the documents include perspective drawing or computer rendering supplied by the stakeholder. Most affected parties are non professional in terms of planning, and have little or no experience dealing with the plans. Therefore, the information they rely on most cases is the perspective images, which easily can be manipulated. A system that enables all parties engaged in the planning process to visualize planning scenarios in a much realistic way is therefore needed. Virtual Reality is a tool that enables the viewer to move freely in a three dimensional digital environment. In this virtual world, different levels of interactivity can be added. The Norwegian University of Life Sciences (UMB) has recently installed a new immersive Virtual Reality system based on the idea of ConCave theatre. This research study is making use of the new ConCave theatre in order to test whether VR can be used as an enhancement of the communication process between professionals and amateurs and between professionals. By presenting digital models of different level of detail to two subject groups consisting of students with planning background and two groups without such experience we first investigated perception in an immersive VR-environment.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ijac20097405
id	ijac20097405
authors	Derix, Christian
year	2009
title	In-Between Architecture Computation
source	International Journal of Architectural Computing vol. 7 - no. 4, 565-586
summary	In-Between Architecture Computation describes the evolution of the Computational Design approach at the AedasR&D Computational Design and Research group founded in 2004 at Aedas architects in London. The approach has transformed itself from an academic inspired thinking about computing media to a more flexible model of design heuristics and search algorithms that finally start to produce new hybrid design workflows in the industry while also swimming against the industry trend of super-integration software. Only if computing is not exclusively defined through architectural design intent or purely computing logic, does computational design explore new design thinking.
series	journal
last changed	2010/09/06 08:02

_id	ecaade2011_127
id	ecaade2011_127
authors	Di Mascio, Danilo; Palka, Pierpaolo
year	2011
title	From the 3D survey “ad Oggetto” to the technological representation of the architecture: The case study of Caporciano
doi	https://doi.org/10.52842/conf.ecaade.2011.829
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.829-836
summary	In this paper we are to present a research, still in progress, whose main objective is the desire to develop and test an alternative method of surveying, representing and analyzing buildings that are part of a minor historical-artistic heritage. The instruments used and the proposed methodology want to give an alternative to other solutions such as 3D laser scanners and photogrammetry, which would be not only expensive, but also difficult to use in small and irregular spaces, typical of the old Italian villages. The case study that will be presented is Caporciano, a small medieval village in Abruzzo (a region at the centre of Italy), in the internal area of the region affected by a violent earth quake in 2009. This tragic event has put the spotlights on the problems and the fragility of these small villages, which represent an important local resource of cultural importance, and therefore must be preserved for the future generation. In order to properly act in these areas, it is necessary to thoroughly know the actions to be taken for its recovery or conservation, and the present methodology allows the creation of this knowledge made up of several drawings, both two-dimensional and three-dimensional.
wos	WOS:000335665500095
keywords	3D survey; cultural heritage; 3d modeling; CAD; Abruzzo region
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ascaad2009_samir_foura
id	ascaad2009_samir_foura
authors	Foura, Samir and Samira Debache
year	2009
title	Thermal Simulation In Residential Building Within Computer Aided Architectural Design: Integrated model
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 235-243
summary	Nowadays, the architectural profession is seeking a better energy saving in the design of buildings. The fear of energy shortage in the very near future, together with the rapid rise in energy prices, put pressure on researchers on this field to develop buildings with more efficient heating systems and energy systems. This work is concerned mainly with the development of a software program analyzing comfort in buildings integrated in CAD architectural systems. The problem of presenting the computer with information concerning the building itself has been overcome through integration of thermal analysis with the building capabilities of CAD system. Mainly, such experience concerns the rules for calculating heat loss and heat gain of buildings in Algeria, The program has been developed in order to demonstrate the importance of the innovation of the computer aided-architectural-design field (CAAD) in the technology of buildings such as the three dimensional modeling offering environmental thermal analysis. CAAD is an integrated architectural design system which can be used to carry out many tasks such as working drawings, perspectives and thermal studies, etc., all from the same data. Results are obtained in tabular form or in graphical output on the visual display. The principle of this program is that all input data should be readily available to the designer at the early stages of the design before the user starts to run the integrated model. Particular attention is given to the analysis of thermal aspects including solar radiation gains. Average monthly energy requirement predictions have been estimated depending on the building design aspect. So, this integrated model (CAAD and simulation comfort) is supposed to help architects to decide on the best options for improving the design of buildings. Some of these options may be included at the early design stages analysis. Indications may also be given on how to improve the design. The model stored on CAAD system provides a valuable data base for all sort analytical programs to be integrated into the system. The amount of time and expertise required to use complex analytical methods in architectural practice can be successfully overcome by integration with CAAD system.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	acadia09_255
id	acadia09_255
authors	Frumar, Jerome; Zhou, Yi Yi
year	2009
title	Kinetic Tensegrity Grids with 3D Compressed Components
doi	https://doi.org/10.52842/conf.acadia.2009.255
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 255-258
summary	This paper details a series of preliminary explorations into the concept of kinetic tensegrity grids that can respond to stimuli by changing their shape, porosity, and transparency. The research presented explores double-layer tensegrity grids that utilize 3D “compressed” components. A case study demonstrates their applicability to the formation of sophisticated building envelopes that can actively or passively respond to changes in the environment. A computational form-finding tool is introduced to study design variations in real time. This tool is shown to expand the design spectrum by supporting increased complexity and revealing unexpected design potential. This research is significant as it outlines a practical methodology for conceiving responsive building systems. In particular, it illustrates an approach that synthesizes design concerns with engineering and fabrication goals.
series	ACADIA
type	Short paper
email
last changed	2022/06/07 07:50

_id	ascaad2023_091
id	ascaad2023_091
authors	Haddad, Naif
year	2023
title	From Digital Heritage Documentation to 3D Virtual Reconstruction and Recreation for Heritage Promotion and Reinterpretation: The Case of the iHeritage Project
source	C+++: Computation, Culture, and Context – Proceedings of the 11th International Conference of the Arab Society for Computation in Architecture, Art and Design (ASCAAD), University of Petra, Amman, Jordan [Hybrid Conference] 7-9 November 2023, pp. 7-23.
summary	In the last two decades, the digital age Information and Communication Technologies (ICT) development and concerns combined with rapid technology have permitted the dissemination of different digital applications (including digital documentation, virtual reality (VR), augmented reality (AR), mixed reality (MR), digital gaming, and holograms etc.) oriented toward past, present and future communication using digital three-dimensional audio-visual content. Today, we must acknowledge that 3D virtual 3D reconstruction and recreation has become an established way to build, understand, reinterpret, and promote Cultural Heritage (CH). The virtual 3D reconstruction world and multimedia industry are often considered potential marketing channels for World Heritage Sites (WHS) and heritage tourism. 3D digital/virtual reconstruction merges and embodies subjectivity in one process, playing an attractive role in heritage tourism destinations and creating image experiences, providing the first enjoyable interpretation and information for most audiences. Based on the EU-funded iHERITAGE project ICT Mediterranean platform for the UNESCO CH, this paper attempts to examine some insights into constructing the optimistic image of heritage promotion and tourism in the context of CH as it flows through both physical and virtual spaces to give a glimpse of the future of virtual reconstruction. It illustrates the development of the concepts and practice, challenges and opportunities, advantages and disadvantages, and the negative and the positive sides of the related issues of only 3D digital reconstructions, and some issues concerning the ethics based on the International Chartres and Conventions mainly in the field of scientific visualisation, such as the London Charter (2009) and Seville Principles (2011). Finally, as a practical dimension, it presents some representative examples of 3D digital/virtual reconstruction of characteristic monuments of the WHS of Nabataean Petra in Jordan for the first time.
series	ASCAAD
email
last changed	2024/02/13 14:40

_id	ascaad2009_marek_hnizda
id	ascaad2009_marek_hnizda
authors	Hnizda, Marek
year	2009
title	Systems-Thinking: Formalization of parametric process
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 215-223
summary	This paper details a design process focused on explicit digital parametric modeling as an integral system-outcome design. This investigation isolates and alters a simple geometric form (cylinder) in a constructed architectural design method. Systems are defined as logical, sequential operations inherent to the resultant effects. These operations within each system are composed of various parameters, singular entities containing or referencing data. Given specific data, operations are preformed culminating with corresponding outcomes. The two main components of this research pertain to object extraction and transformation. A single grain silo (cylinder), as the architectural/geometric object under examination, is tested using a system of varied parameters inputted into the program Grasshopper, an “explicit history” graphic plug-in for Rhinoceros. This application is utilized to digitally manipulate parameters as objects in a nodal arrangement. Throughout the operations execution, this isolated silo will be transformed into a multitude of versions, then regrouped into the original cluster of silos to expose the implications from patterning, adjacency, and repetition given the proximity of the each silo and its new parametric characteristics. As the various parameters in specific operations affect the system as a whole, so is each adjacent silo in proximity given the same or similar operation? This then is translated and reflected in the outcome. This research seeks to explore design process by applying constant digital 3-D reductive geometric, modular forms inviting systems thinking in parametric environments that can lead to architectural design implications. By focusing on the technical aspect of the parameterization and valuing functionality rather then style, the process becomes focused on formal qualities as the system-outcome relationships. This research tests the “aesthetic implications” of a varied mode of digital design, namely the investigation of an architectural process utilizing parametric design.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ijac20097108
id	ijac20097108
authors	Izkara, J.L.; Basogain, X.; Borro, D.
year	2009
title	Wearable Personal Assistants for the Management of Historical Centers
source	International Journal of Architectural Computing vol. 7 - no. 1, 139-156
summary	One of the main tasks facing the manager of a historical centre is to avoid degradation while retaining the historical value. For this reason, any intervention which takes place on the environment, should be carefully managed. Only when performing a proper diagnosis of the environment and its reality is possible to follow a high quality intervention. The integration of new information technologies has been crucial to the improvement of these processes providing new tools. Within the project called RASMAP, we have designed and implemented a mobile augmented reality platform based on a service oriented architecture. This project introduces the concept of Wearable Personal Assistant (WPA). WPA in the RASMAP platform represents an innovative wearable tool, which provides support to professionals in their daily activities (mechanical engineer, safety responsible person, diagnosis expert, etc.). This tool is based on augmented reality technologies, mobile devices and communication infrastructures. The development of the platform for the WPAs implies addressing several technological challenges: a) to overcome the limitations inherent in the mobile devices: speed, capacity of memory, capacity of storage, graphical features and others, b) to obtain tracking systems that they do not need to alter or to adapt the environment, c) to optimize for the transmission and reproduction of multimedia contents through wireless networks on mobile devices. In this article, we describe the RASMAP platform, as a basis for the development of WPA and the extension of its use for the management of historical centres. The quality and usefulness of the scientific-technological results provided by the WPA have been validated developing a demonstrator for the diagnosis of the conservation status of the historical centre of a small town in the Basque Country. The advantages to be gained by using WPA in the proposed scenario are among others: more efficient processes, improved communication between users, and local and distributed multimedia content records.
series	journal
last changed	2009/06/23 08:07

For more results click below: