Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 593

Reformat results as: short short into frame detailed detailed into frame

_id	cf2011_p018
id	cf2011_p018
authors	Sokmenoglu, Ahu; Cagdas Gulen, Sariyildiz Sevil
year	2011
title	A Multi-dimensional Exploration of Urban Attributes by Data Mining
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 333-350.
summary	The paper which is proposed here will introduce an ongoing research project aiming to research data mining as a methodology of knowledge discovery in urban feature analysis. To address the increasing multi-dimensional and relational complexity of urban environments requires a multidisciplinary approach to urban analysis. This research is an attempt to establish a link between knowledge discovery methodologies and automated urban feature analysis. Therefore, in the scope of this research we apply data mining methodologies for urban analysis. Data mining is defined as to extract important patterns and trends from raw data (Witten and Frank, 2005). When applied to discover relationships between urban attributes, data mining can constitute a methodology for the analysis of multi-dimensional relational complexity of urban environments (Gil, Montenegro, Beirao and Duarte, 2009) The theoretical motivation of the research is derived by the lack of explanatory urban knowledge which is an issue since 1970‚Äôs in the area of urban research. This situation is mostly associated with deductive methods of analysis. The analysis of urban system from the perspective of few interrelated factors, without considering the multi-dimensionality of the system in a deductive fashion was not been explanatory enough. (Jacobs, 1961, Lefebvre, 1970 Harvey, 1973) To address the multi-dimensional and relational complexity of urban environments requires the consideration of diverse spatial, social, economic, cultural, morphological, environmental, political etc. features of urban entities. The main claim is that, in urban analysis, there is a need to advance from traditional one dimensional (Marshall, 2004) description and classification of urban forms (e.g. Land-use maps, Density maps) to the consideration of the simultaneous multi-dimensionality of urban systems. For this purpose, this research proposes a methodology consisting of the application of data mining as a knowledge discovery method into a GIS based conceptual urban database built out of official real data of Beyoglu. Generally, the proposed methodology is a framework for representing and analyzing urban entities represented as objects with properties (attributes). It concerns the formulation of an urban entity‚Äôs database based on both available and non-available (constructed from available data) data, and then data mining of spatial and non-spatial attributes of the urban entities. Location or position is the primary reference basis for the data that is describing urban entities. Urban entities are; building floors, buildings, building blocks, streets, geographically defined districts and neighborhoods etc. Urban attributes are district properties of locations (such as land-use, land value, slope, view and so forth) that change from one location to another. Every basic urban entity is unique in terms of its attributes. All the available qualitative and quantitative attributes that is relavant (in the mind of the analyst) and appropriate for encoding, can be coded inside the computer representation of the basic urban entity. Our methodology is applied by using the real and official, the most complex, complete and up-to-dataset of Beyoglu (a historical neighborhood of Istanbul) that is provided by the Istanbul Metropolitan Municipality (IBB). Basically, in our research, data mining in the context of urban data is introduced as a computer based, data-driven, context-specific approach for supporting analysis of urban systems without relying on any existing theories. Data mining in the context of urban data; ‚Ä¢ Can help in the design process by providing site-specific insight through deeper understanding of urban data. ‚Ä¢ Can produce results that can assist architects and urban planners at design, policy and strategy levels. ‚Ä¢ Can constitute a robust scientific base for rule definition in urban simulation applications such as urban growth prediction systems, land-use simulation models etc. In the paper, firstly we will present the framework of our research with an emphasis on its theoretical background. Afterwards we will introduce our methodology in detail and finally we will present some of important results of data mining analysis processed in Rapid Miner open-source software. Specifically, our research define a general framework for knowledge discovery in urban feature analysis and enable the usage of GIS and data mining as complementary applications in urban feature analysis. Acknowledgments I would like to thank to Nuffic, the Netherlands Organization for International Cooperation in Higher Education, for funding of this research. I would like to thank Ceyhun Burak Akgul for his support in Data Mining and to H. Serdar Kaya for his support in GIS.
keywords	urban feature analysis, data mining, urban database, urban complexity, GIS
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2009_1100
id	sigradi2009_1100
authors	Celento, David
year	2009
title	Digital Craft Meets the Ancient Art of Ceramics: Would the Bauhaus Approve?
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	The Bauhaus was founded upon the controversial premise that emergent mechanical processes offered new and creative ways to explore materials. Today, we encounter equally tendentious scenarios where the designer often appears one step further removed—automated CNC machines are driven by computational machines. Like the early activities of the Bauhaus some view digital pursuits with suspicion; however, digital design/fabrication is the “Nächster Bauhaus Bewegun” offering opportunities for design innovation equal in significance to that of the Bauhaus. This paper partially examines the theoretical implications of digital design/fabrication, then presents a collaboration between an architect and artist re-examining the architectural cladding possibilities using digital tools to shape one of mankind’s most venerable materials—ceramics.
keywords	Ceramics in architecture, mass customization, digital fabrication, parametric design
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	ascaad2009_tayeb_sahnoune
id	ascaad2009_tayeb_sahnoune
authors	Sahnoune, Tayeb and Brahim Nuibat
year	2009
title	Digital Design Tools and Case Study Reasoning
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 451-463
summary	This study investigates how the use of digital technology in general, and electronic information and automation, especially during the course of study and preparation of urban and architectural designs on the one hand, and analysis of the impact of these applications and uses of the media automation and information technology at various stages of Physical planning and architectural design of projects, on the other hand. The comparison between modern and traditional methods, to determine the positives and negatives of both sides on the economic (economy, effort, money and time) and technical, which includes (graphic representation: painting, measure, Quality, precision, colours, details and other ....). The answer to whether computer and digital development has invented, added, or nothing of substance to content of architecture and urban planning designs, or has enabled us to solve the urban and architectural problems related to social and cultural aspects. We have in this study, the city of _Boussa_da_ in the south of Algeria as an example, through which presentation and analysis of two types of field projects carried in our architectural office using; media techniques and various programs: (Architectural3.3/Accurender/Art-lantis...) mentioning That, the two projects have been completed and approved, and are now in the process of realisation. The first project represents a residential neighbourhood area of (82.65 ha), through the action plan and land uses called _Plan d_occupation des sols_ in Algeria, No.09, in order to create and prepare the new town for extension, establish administrative and commercial centre, and determine the nature of land use; (equipment, facilities and housing),for a population number estimated (12,264)inhabitants, and projected number of housing estimated at 2409 houses, with a density of 150 inhabitants / ha. The second project is to study the architecture of the 50 houses earmarked for social Tzhmia working group, formed 25 three-room apartment type with(67.00 m 2) and 25 four-room apartment type with(77.00m2). However, The study aims to identify the impact of automated information applications and information technology used at different stages of urban planning and architectural design of these projects under consideration by the comparison between the traditional design table, and electronic design table to determine the pros and cons of each one of these means on the one hand, and stages of concepts and design, On the other, before concluding to how to use the media automation and digital technology, trying to find a point of hugs between the means and tools of Planning and design, through the analysis of the historical path of each of these elements.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	cf2011_p060
id	cf2011_p060
authors	Sheward, Hugo; Eastman Charles
year	2011
title	Preliminary Concept Design (PCD) Tools for Laboratory Buildings, Automated Design Optimization and Assessment Embedded in Building Information Modeling (BIM) Tools.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 451-476.
summary	The design of laboratory buildings entails the implementation of a variety of design constraints such as building codes; design guidelines and technical requirements. The application of these requires from designers the derivation of data not explicitly available at early stages of design, at the same time there is no precise methodology to control the consistency, and accuracy of their application. Many of these constraints deal with providing secure environmental conditions for the activities inside laboratories and their repercussions both for the building occupants and population in general, these constraints mandate a strict control over the building‚Äôs Mechanical Equipment (MEP), in particular the Heating Ventilating and Air Conditioning (HVAC) system. Due to the importance of these laboratory designers are expected to assess their designs not only according spatial relationships, but also design variables such as HVAC efficiency, air pressure hierarchies, operational costs, and the possible implications of their design decisions in the biological safety of the facility. At this point in time, there are no practical methods for making these assessments, without having constant interaction with HVAC specialists. The assessment of laboratory design variables, particularly those technical in nature, such as dimensioning of ducts or energy consumption are usually performed at late stages of design. They are performed by domain experts using data manually extracted from design information, with the addition of domain specific knowledge, the evaluation is done mostly through manual calculations or building simulations. In traditional practices most expert evaluations are performed once the architectural design have been completed, the turn around of the evaluation might take hours or days depending on the methods used by the engineer, therefore reducing the possibility for design alternatives evaluation. The results of these evaluations will give clues about sizing of the HVAC equipment, and might generate the need for design reformulations, causing higher development costs and time delays. Several efforts in the development of computational tools for automated design evaluation such as wheel chair accessibility (Han, Law, Latombe, Kunz, 2002) security and circulation (Eastman, 2009), and construction codes (ww.Corenet.gov.sg) have demonstrated the capabilities of rule or parameter based building assessment; several computer applications capable of supporting HVAC engineers in system designing for late concept or design development exist, but little has been done to assess the capabilities of computer applications to support laboratory design during architectural Preliminary Concept Design(PCD) (Trcka, Hensen, 2010). Developments in CAD technologies such as Building Information Modeling (BIM) have opened doors to formal explorations in generative design using rule based or parametric modeling [7]. BIM represents buildings as a collection of objects with their own geometry, attributes, and relations. BIM also allows for the definition of objects parametrically including their relation to other model objects. BIM has enabled the development of automated rule based building evaluation (Eastman, 2009). Most of contemporary BIM applications contemplate in their default user interfaces access to design constraints and object attribute manipulations. Some even allow for the application of rules over these. Such capabilities make BIM viable platforms for automation of design data derivation and for the implementation of generative based design assessment. In this paper we analyze the possibilities provided by contemporary BIM for implementing generative based design assessment in laboratory buildings. In this schema, domain specific knowledge is embedded in to the BIM system as to make explicit design metrics that can help designers and engineers to assess the performance of design alternatives. The implementation of generative design assessments during PCD can help designers and engineers to identify design issues early in the process, reducing the number of revisions and reconfigurations in later stages of design. And generally improving design performance.
keywords	Heating ventilating and Air Conditioning (HVAC), Building Information Models (BIM), Generative Design Assessment
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2009_171
id	caadria2009_171
authors	Yuan, Yong; Jixi Ai
year	2009
title	Analysis and Evaluation on The Planning of Urban Open Space for Urban Disaster Prevention
doi	https://doi.org/10.52842/conf.caadria.2009.307
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 307-316
summary	Urban disaster prevention is an important aspect in evaluating the whole-function of a city. It is the most important and actual method to make full use of urban open space and to construct urban disaster prevention system in the work of preventing urban disasters. This paper presents an approach to solve the problem about the population evacuation during the earthquake, and a new method to spread out population data which can distribute the population in a district and locate to every house finally. At the core of the algorithm, the Wave-front Method is used to calculate service range of each open space. Urban planners can evaluate the layout of urban open space according to the distribution of population and traveling time predicted. Lastly, this paper provides some evaluating indexes for open space to integrate all open space units.
keywords	Urban open space, urban disaster prevention, planning of urban open space, spread of population data, GIS
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	caadria2009_152
id	caadria2009_152
authors	Henriques, Gonçalo Castro
year	2009
title	Crafting New Artefacts
doi	https://doi.org/10.52842/conf.caadria.2009.205
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 205-214
summary	The craft of complex artefacts, questioning technological changes and reflecting social and cultural transformation used to be a common attitude in traditional artisans of the pre industrialized society. Traditional craftsman developed special knowledge and skills, implementing their own tools and techniques. After the industrial revolution, the main focus shifted to mass production, and the personalization of artefacts became labour intensive and more expensive. Simultaneously, with technical specialization and the fragmentation of knowledge, the designer’s, builder’s and manufacturer’s approach became more segregated. Currently, information technologies offer new opportunities to the craft of complex objects. The integration of digital process from conception to fabrication, can transform this situation, and as a result personalization is more affordable. Nevertheless, the introduction of these new techniques or tools is lacking a poetic synthesis for the use of technology, and the social and cultural implications that may result of this use. A competition for a public installation was an opportunity to use digital tools to conceive, manufacture and construct a complex structure with a small budget that would be impossible to attain using only traditional tools. At the same time, this project - genetic landscape- could be seen as a metaphor, alluding to the technological interference on the process of creating a new life, or a second nature.
keywords	expanding traditional tools; digital craft; complex geometry built-case
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	caadria2009_065
id	caadria2009_065
authors	Li, Biao; Rong Li
year	2009
title	Optimal Organization of Architectural Spaces Based on Genetic Algorithm
doi	https://doi.org/10.52842/conf.caadria.2009.653
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 653-661
summary	Genetic algorithms categorized as global search heuristics are search technique of seeking approximate or exact solutions for optimizing problems. Our generative tool named notchSpace starts from a population of randomly generated individuals which rationally subdivide architectural spaces with a low “fitness”. During generations’ evolution, the population is recombined, modified and mutated at a low rate to form new modes of building spatial subdivision; a new population is used in the next iteration. NotchSpace works up a research platform to evolve architectural spaces, and it explores the thinking of translation from computer algorithms to the field of architecture.
keywords	Genetic algorithms; evolutions; fitness; crossover
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	cf2009_159
id	cf2009_159
authors	Marin, Philippe; Lequay, Hervé and Bignon, Jean-Claude
year	2009
title	Un outil évolutionnaire d’aide à la conception architecturale créative : Mise en oeuvre d’un algorithme génétique et prise en compte des paramètres environnementaux; Evolutionary tool assisting creative architectural design: Implementation of an genetic algorithm and assessment of environmental parameters
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 159-172
summary	This work focuses on the development of a tool capable of assisting and supporting architectural design activity. We propose an evolutionary mechanism through the use of a genetic algorithm. Environmental parameters are convoked to drive the evolution. The solar passive qualities of the object under study allow the energizing evaluation. This paper deals with the interaction between verbal thinking and visual thinking through the use of this generative tool.
keywords	Genetic algorithm, creative design, environmental parameters
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	acadia09_122
id	acadia09_122
authors	Oxman, Neri
year	2009
title	Material-Based Design Computation: Tiling Behavior
doi	https://doi.org/10.52842/conf.acadia.2009.122
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 122-129
summary	From natural objects to man-made artifacts, tiling is all around us: it is the act of rationalizing highly complex form by breaking it up into smaller, continuous components. If well pursued, tiled objects can be easily designed and assembled. However, a geometric-centric view of tiling, whereby a predefined form determines the shape, size, and organization of tiles, has victimized the field of digital design. This paper questions the role of tiling as rationalizing method and offers an alternative theoretical framework and technical grounding for tiling behavior: the act of generation-through-tessellation informed by material behavior. The tools developed are implemented in the design of a 3D-printed chaise lounge, using multiple materials. The technical objective is to introduce a quantitative characterization and analysis of property mapping, as it is applied to a tiling algorithm using Voronoi cell tessellation. The network of tessellated Voronoi cells is used as an element in the Voronoi Finite Element Method (V-FEM) that the author developed. Various characterization functions and geometric parameters are generated, and V-FEM is executed for plane-strain analysis of doubly curved surfaces, from which global and local responses are evaluated.
keywords	Tessellation, tiling, Voronoi, Algorithmic design
series	ACADIA
type	Normal paper
email
last changed	2022/06/07 08:00

_id	ecaade2009_039
id	ecaade2009_039
authors	Papapavlou, Aikaterini; Turner, Alasdair
year	2009
title	Structural Evolution: A Genetic Algorithm Method to Generate Structurally Optimal Delaunay Triangulated Space Frames for Dynamic Loads
doi	https://doi.org/10.52842/conf.ecaade.2009.173
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 173-180
summary	This paper presents an evolutionary algorithm that draws its power from the literal interpretation of the natural system’s reproductive process at a microscopic scale with the scope of generating optimal Delaunay triangulated space frames for dynamic loads. The algorithm repositions a firm number of nodes within a space envelope, by establishing Delaunay tetrahedra and, consequently, creating adaptable optimised space frame topologies. The arbitrarily generated tetrahedralised structure is compared against a canonical designed one and the results of this comparison indicate that the method proposed has advantageous properties and is capable of generating an optimum structure that exceeds statically the performance of an engineered tetrahedralised space frame.
wos	WOS:000334282200021
keywords	Genetic Algorithms, optimization, delaunay triangulation, space frame
series	eCAADe
email
last changed	2022/06/07 08:00

_id	cf2009_314
id	cf2009_314
authors	Boerner, Andrea; Maquil, Valérie
year	2009
title	Enhancing synergies between computer science and urban disciplines: Semi-automated applications for tangible user interfaces, a case study
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 314-327
summary	This paper explores an interdisciplinary design approach for coupling semi-automated applications with tangible user interfaces. It describes communication methods based on parameters and diagrams, between computer scientists and urban, architectural professionals and the matching abilities to give meaning to the various parts and elements of the system. By means of the development of two rule based applications it exploits different degrees of automation and kinds of feedback possibilities and its impact on discourse and decision making. It discusses design methods for interactive urban planning applications, which integrate the different requirements and benefits from both disciplines.
keywords	Tangible user interfaces, semi-automation, decision making, urban planning
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	cf2009_458
id	cf2009_458
authors	Dillenburger, Benjamin; Braach, Markus and Hovestadt, Ludger
year	2009
title	Building design as individual compromise between qualities and costs: A general approach for automated building generation under permanent cost and quality control
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 458-471
summary	We introduce an evolutionary design approach for the automatic arrangement of a predefined space program on a given site. The design goal is to distribute floor spaces while ensuring the essential building performance and usage. The presented evolutionary strategy is applied to acquire optimal design solutions considering both environmental conditions and inner organization under diversified fitness functions. The evaluation process consists of the direct analysis of the spatial network and the physical factors in an adequate accuracy. The method provides a fast generation of qualified volumetric studies. The resulting buildings become a manifested compromise between qualities and cost.
keywords	Evolutionary strategy, multi-fitness criteria, dual graph representation, network analysis, building envelope
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	ecaade2009_188
id	ecaade2009_188
authors	Economou, Athanassios; Grasl, Thomas
year	2009
title	Point Worlds
doi	https://doi.org/10.52842/conf.ecaade.2009.221
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 221-228
summary	A computational approach for the automated graph representation and diagrammatic notation of all underlying symmetry structures of three-dimensional shapes with a center of symmetry is briefly presented and some applications with shape grammars to illustrate these ideas are discussed in the end.
wos	WOS:000334282200027
keywords	Shape studies, graph grammar, shape grammar, symmetry, configuration
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ijac20097102
id	ijac20097102
authors	Georgopoulos, A.; Ioannidis, C.h.; Chrysostomou, C.h.; Ioakim, S.; Shieittanis, N.; Ioannides, M.
year	2009
title	Contemporary Digital Methods for the Geometric Documentation of Churches in Cyprus
source	International Journal of Architectural Computing vol. 7 - no. 1, 21-37
summary	Recent advances in digital methods incorporating information technology have enabled the traditional surveyor and monument recorder to work faster, more accurately and in an automated way in order to produce advanced digital products, more versatile and more useful to the end users. Such methods include tacheometry, digital photogrammetry, as image-based method, terrestrial laser scanning and the development of specialized software in order to fully exploit the digital data acquisition. Usually, a combination of these methods gives the most efficient cost benefit results, by providing 2D vector and raster products and 3D textured models. In this paper two examples of the implementation of these methods in the geometric documentation of two churches, both significant for the history of Cyprus, are presented. It is concerned with the churches of Virgin Mary (Panayia) Podithou, in Galata and St. George Nikoxylitis in Droushia. The applied methodology, using classical and contemporary techniques of commercial and in-house developed software is presented. Comparative tests for the achieved accuracies and the completeness of each method's products have been made, and their merits and usefulness are explained.
series	journal
last changed	2009/06/23 08:07

_id	acadia09_245
id	acadia09_245
authors	Niemeijer, Remco; de Vries, Bauke; Beetz, Jakob
year	2009
title	One Size Fits None: A User Interface for Constraint-Based Design
doi	https://doi.org/10.52842/conf.acadia.2009.245
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 245-247
summary	Flexible mass customization of buildings is still in its infancy. Current systems for the automated support of ownerdriven configuration management are limited with regard to the degree of freedom they offer to end-users, due to the lack of an easy way to specify those freedoms. In this paper we present the prototype of an interface that allows architects to define constraints to which user-customized dwellings must conform.
series	ACADIA
type	Short paper
email
last changed	2022/06/07 07:58

_id	sigradi2009_744
id	sigradi2009_744
authors	Assumpção, Paula Sobrino de Souza;
year	2009
title	A influência do usuário sobre a apresentação visual da informação na web: o caso do layout adaptativo e da personalização de layout [User's influence on the visual presentation of information on the web: the case of adaptive layout and layout’s customization]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	Ahead of the digital environments expansion which follows the principles of the web 2.0, one can notice a growing opening for user's participation. The proposal of this research is to reflect on how this scenario of participation is strengthening a social structure capable of actively acting not only in the production of digital content, but also in the form of this content presentation. From a survey of cases and a theoretical review, this paper aims to analyze two different types of user’s influence on the visual dimension of web environments. One first - adaptive layout - based on the indirect user’s action and a second - layout’s customization - based on the direct user’s action.
keywords	Web design; web 2.0; architecture of participation; visual presentation
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2009_180
id	ecaade2009_180
authors	Halatsch, Jan; Mamoli, Myrsini; Economou, Athanassios; Schmitt, Gerhard
year	2009
title	The Hellenistic City Model Inspired by Koolhaas: A Test Case for a Generic City Model
doi	https://doi.org/10.52842/conf.ecaade.2009.279
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 279-286
summary	In this paper, we suggest a generic city description model suited for purposes like semi-automatic city modeling and urban layout evaluation. The generic city model refers to basic vital functions of a (computable) city. Feature patterns are used to extend the generic city model with global and local characteristics. The Hellenistic cities serve as a platform for a first implementation to test a semi-automatic city model generation. As a result four cities are reconstructed as a first example of our ongoing work, Miletus, Knidos, Priene and Olynthus. Future work will deal with the application of the generic city model to the performance simulation of contemporary urban layouts.
wos	WOS:000334282200034
keywords	City modeling, semi-automatic, design grammars, urban planning, archeological reconstruction, generic city
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ecaade2009_101
id	ecaade2009_101
authors	Krijnen, Thomas; Beetz, Jakob; de Vries, Bauke
year	2009
title	Airport Schiphol: Behavioral Simulation of a Design Concept
doi	https://doi.org/10.52842/conf.ecaade.2009.559
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 559-564
summary	In this paper, we introduce an agent-based simulation of passengers in airport terminal buildings. A case study is described during which a prototype simulation tool is used to test the impact of a conceptual design change in an existing airport terminal building. We illustrate how this real-time, geometry-aware simulation can be generalized and integrated into the design process to support designers in configuring the spatial layout of public and functional buildings.
wos	WOS:000334282200067
keywords	User behavior, agent-based simulation, airport terminal, design process, design evaluation
series	eCAADe
email
last changed	2022/06/07 07:51

_id	caadria2009_087
id	caadria2009_087
authors	Lin, Chieh-Jen
year	2009
title	Smart Topology
doi	https://doi.org/10.52842/conf.caadria.2009.451
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 451-460
summary	This paper describes a prototype of an intuitive tool named Smart Topology for the architectural space allocation in the early design phase. Smart Topology focuses on the manipulations of virtual spaces and can build and operate the topological relation among them by instantly modifying the geometric properties of spatial allocation so as to comply with the topological relation defined by the user. Based on a prototype of an interactive tool for the spatial allocation named Spatial Layout Game (SLG), Smart Topology adds more topological operations into SLG, such as the connective, combining, orientating, and opening. It also tracks the manipulating process and results by applying the database technology.
keywords	Spatial allocation; spatial topology; knowledge representation; intuitive manipulation
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	cf2009_656
id	cf2009_656
authors	Madrazo, Leandro; Sicilia, Álvaro; González, Mar and Cojo, Angel Martin
year	2009
title	Barcode housing system: Integrating floor plan layout generation processes within an open and collaborative system to design and build customized housing
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 656- 670
summary	The goal of the project has been to design and implement an ICT environment which facilitates the interaction of the different actors (architects, builders, manufacturers, occupants) involved in the design, construction and use of affordable housing built with industrialized methods. The interwoven working environments which form the structure of the system enable the actors to carry out their activities in a synchronous and asynchronous manner. As well as providing a structure that supports collaboration, the system automatically generates housing units and buildings.
keywords	Design thinking, knowledge based design, project management, collaboration and communication
series	CAAD Futures
email
last changed	2009/06/08 20:53

For more results click below: