Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 298

Reformat results as: short short into frame detailed detailed into frame

_id	acadia21_444
id	acadia21_444
authors	Crawford, Assia
year	2021
title	Mitochondrial Matrix
doi	https://doi.org/10.52842/conf.acadia.2021.444
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 444-453.
summary	The following project was created as part of an art residency with the Wellcome Centre for Mitochondrial Research (WCMR) at Newcastle University. The WCMR specializes in leading-edge research into mitochondrial disease, investigating causes, treatments, and ways of avoiding hereditary transmission. Mitochondria is believed to have started off as a separate species that through symbiosis came to be the powerhouse of each cell in our bodies (Hird 2009). Mitochondrial disease is a genetic disorder that is caused by genetic mutations of the DNA of the mitochondria or the cell that in turn affects the mitochondria (Bolano 2018). Mitochondria is a hereditary condition and can affect people at different stages in their lives. It can affect various organs and has a link to various types of conditions. Therefore, the patient experience is unique to each individual and the elusive nature of the condition can make it particularly challenging due to the complexity of the disorder as well as the inaccessible scale on which these variations occur (Chinnery 2014)
series	ACADIA
type	project
email
last changed	2023/10/22 12:06

_id	sigradi2012_155
id	sigradi2012_155
authors	Dutt, Florina; Das, Subhajit
year	2012
title	Pluripotent Structures: An Exploration into Digital Design & Fabrication by Bio Mimicry
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 665-668
summary	This project is an exploration into the design & fabrication process of a canopy structure derived from the notion of pluripotency. The term is widely used in the context of stem cells in biological science where pluripotency is referred to the potential of a stem cell to develop into more than one type of mature cell, depending on environment. These can be re-interpreted architecturally as, the quality of design components or elements to be radically transformed into one or more different kinds of components, keeping the general structural integrity of the design unchanged (Kolatan, 2009). Consequently, the pluripotent canopy design is a 3 dimensional double curved surface , having smart pluripotent components populated over its domain, which parametrically has the potential to be transformed to more than one different kinds of elements, keeping the same parameters of construction for each component.
keywords	Stem Cell Concept; Pluripotency in Nature; Digital Prototyping; Voronoi Geometry
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	cf2009_083
id	cf2009_083
authors	El-Khoury, Nada; De Paoli, Giovanni
year	2009
title	Compréhension, communication et gestion de l’esprit du lieu : patrimoine et stratégies de développement durable à l’aide des TIC; The understanding, communication and management of the spirit of the location: ICT supported heritage and sustainable development strategies
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 83-94
summary	The research results presented in this article propose, with the aid of Information and Communication Technologies and 3D digital modeling, the creation of a communications platform to promote the acquisition of knowledge and to support the management of “sustainable development”. These initiatives are essential if sustainable development practices want to make significant progress. The digital environment proposed, which is by nature multidisciplinary, allows for an efficient collaboration between different disciplines concerned with heritage challenges. The purpose of this study is to understand, communicate, manage and envisage heritage within the optic of sustainable development.
keywords	ICT, collaborative work space, wiki, 3D modeling, sustainable development, heritage
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	ecaade2009_195
id	ecaade2009_195
authors	Gürer, Ethem; Çagdas, Gülen
year	2009
title	An Emergent Form Generation Method for Supporting Conceptual Design
doi	https://doi.org/10.52842/conf.ecaade.2009.167
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 167-172
summary	Evolutionary design methodologies generally aim to present new form-finding processes, where nature-based approaches are used, such as self-organization, genetic algorithms etc. This paper aims to present a new architectural design approach that focuses on integrating these different evolutionary methods in an emergent process. The main goal is to achieve a high-level of integration where lacking qualities of each evolutionary method are completed by the other one in a synergic and especially emergent behavior. A multi-level design approach is described in this study. Points highlighted are concerned with the pre-design phases. Within a bottom-top simulation, an infinite high-level solution cluster is revealed from behavioral interactions and collectivity of the low-level entities: agents. Simulated design process is visualized by a determined project area in Istanbul: Kuruçe_me Island on the Bosphorus as an exhibition center. Programmed in 3dsMax, simulation phase supports the creative design process in early phases.
wos	WOS:000334282200020
keywords	Evolutionary design, bottom-top approach, self-organization, agent, emergence
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ascaad2009_jonathan_healey
id	ascaad2009_jonathan_healey
authors	Healey, Jonathan T. and Lisa Lacharité-Lostritto
year	2009
title	Speculative Assemblages of a Digital Process: The investigation of hybrid digital media as a pedagogical device
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 61-68
summary	Within a digital-design pedagogy is opportunity to construct a design process working non-linearly in explicit systemic, conditional, and metaphorical operations. In the use of digital modeling and animation, speculative design methods develop across a series of incremental investigations that are structured, rather than dictated, by the particular architectural issues of composition and concept of place. By accommodating the diversity of such inputs, and testing the variable layers of output, new discrete compositions in the form of digital assemblage recombine and translate a series of logical premises and processes that resolve in non-prescribed outcomes. This paper identifies, through the work of two students, experimentations with computer-aided design that suggest the potential for hybrid design methods relevant to the exploratory nature of a digitally-inclined architectural pedagogy.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ecaade2009_129
id	ecaade2009_129
authors	Hemmerling, Marco
year	2009
title	Twister: An Integral Approach towards Digital Design and Construction
doi	https://doi.org/10.52842/conf.ecaade.2009.299
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 299-304
summary	The paper outlines the relevance of computational geometry within the design and production process of architecture. Based on the case study “Twister”, the digital chain - from the initial form-finding to the final realization of spatial concepts - is discussed in relation to geometric principles. The association with the fascinating complexity, which can be found in nature and its underlying geometry was the starting point for the project presented in the paper. The translation of geometric principles into a three-dimensional digital design model was followed by a process of transformation and optimization of the initial shape, that integrated aesthetic, spatial and structural qualities as well as aspects of material properties and conditions of production.
wos	WOS:000334282200036
keywords	Geometry, 3D modeling, rapid prototyping, photogrammetry, digital fabrication
series	eCAADe
email
last changed	2022/06/07 07:49

_id	caadria2009_170
id	caadria2009_170
authors	Liu Zhi; Jixi Ai and Zheng Wang
year	2009
title	Study on Zoning of Urban Morphology based on GIS
doi	https://doi.org/10.52842/conf.caadria.2009.317
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 317-326
summary	The traditional studies of urban morphology mainly focus on material aspects such as urban construction, urban environment. The writers of the paper, however, point out that the nature behind material aspects should be load capacity of urban land-use, which can be reflected through some economic and technological indexes, such as floor area ratio(FAR), building density and building height, and generally they are relative. The paper forms a new morphology zoning method after having studied the relation of the above indexes based on the digital methods of GIS. This rout of thought may have some reference value for controlling the expanse of urban land-use, optimizing the allocation of resources and urban morphology and supervising the implementation of urban planning. In the paper, the author proposed the concept of “zhubei” to describe and evaluate urban morphology. We can further analyze “zhubei” regards urban planning analysis and management, for example, the slope analysis, aspect analysis, view analysis, area and volume analysis etc. Therefore, we can describe current urban morphology and evaluate its rationality by relevant conclusions just like describing vegetation.
keywords	urban morphology: zoning: GIS; digital; planning; zhubei
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	sigradi2009_979
id	sigradi2009_979
authors	Martinez, Yusnier Valle
year	2009
title	A Sierpinski Space-filling Curve based Modeling of Height Fields
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	A continuous curve in 2, 3, or higher dimensions, can be thought as a path of a continuously moving point. This class of curves has been used in the design and implementation of spatial data structures. This paper is essentially focused on the efficient representation of terrain models. We propose to implement a binary triangles tree by means of the Sierpinski space-filling curve. The hierarchical nature of this curve makes it very useful to represent this kind of spatial structure. Traversal algorithms, neighbor finding techniques, among others, are presented on the paper demonstrating the efficiency of the proposed structure.
keywords	Sierpinski; bitrees; triangulation; multiresolution; visualization; space-filling curve
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	sigradi2009_875
id	sigradi2009_875
authors	Medero Rocha, Isabel Amalia
year	2009
title	Programa e Projeto na Era Digital [Program and Design in the Digital Age]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	The essay is based on thesis of doctorate whose argument is delineated in the embroidery frame of the notion of ‘program’. The term ‘program’, includes in its meaning computational program and program of architecture. It is conspired by the different instances of design nature where “program” and design interact. It equates the digital phenomenon from the different natures that can assume the concept of “program” as software and as architecture program. It analyzes the interaction designer, ‘program”, image and information in the digital design. Considers the experimentation as form to exceed the limitations imposed for the rules programmed in the ‘programs’.
keywords	Digital design; design theory; blackbox
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	ascaad2009_tayeb_sahnoune
id	ascaad2009_tayeb_sahnoune
authors	Sahnoune, Tayeb and Brahim Nuibat
year	2009
title	Digital Design Tools and Case Study Reasoning
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 451-463
summary	This study investigates how the use of digital technology in general, and electronic information and automation, especially during the course of study and preparation of urban and architectural designs on the one hand, and analysis of the impact of these applications and uses of the media automation and information technology at various stages of Physical planning and architectural design of projects, on the other hand. The comparison between modern and traditional methods, to determine the positives and negatives of both sides on the economic (economy, effort, money and time) and technical, which includes (graphic representation: painting, measure, Quality, precision, colours, details and other ....). The answer to whether computer and digital development has invented, added, or nothing of substance to content of architecture and urban planning designs, or has enabled us to solve the urban and architectural problems related to social and cultural aspects. We have in this study, the city of _Boussa_da_ in the south of Algeria as an example, through which presentation and analysis of two types of field projects carried in our architectural office using; media techniques and various programs: (Architectural3.3/Accurender/Art-lantis...) mentioning That, the two projects have been completed and approved, and are now in the process of realisation. The first project represents a residential neighbourhood area of (82.65 ha), through the action plan and land uses called _Plan d_occupation des sols_ in Algeria, No.09, in order to create and prepare the new town for extension, establish administrative and commercial centre, and determine the nature of land use; (equipment, facilities and housing),for a population number estimated (12,264)inhabitants, and projected number of housing estimated at 2409 houses, with a density of 150 inhabitants / ha. The second project is to study the architecture of the 50 houses earmarked for social Tzhmia working group, formed 25 three-room apartment type with(67.00 m 2) and 25 four-room apartment type with(77.00m2). However, The study aims to identify the impact of automated information applications and information technology used at different stages of urban planning and architectural design of these projects under consideration by the comparison between the traditional design table, and electronic design table to determine the pros and cons of each one of these means on the one hand, and stages of concepts and design, On the other, before concluding to how to use the media automation and digital technology, trying to find a point of hugs between the means and tools of Planning and design, through the analysis of the historical path of each of these elements.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	0540
id	0540
authors	Schnabel, Marc Aurel
year	2009
title	Interplay Of Domains: New Dimensions of Design Learning in Mixed Realities
source	Mixed Reality In Architecture, Design, And Construction, Wang, Xiangyu; Schnabel, Marc Aurel (Eds.) 2009, XIV, ISBN: 978-1-4020-9087-5, pp. 219-226
summary	There is a distance between the idea of a design in the imagination and its representation, communication and realisation. Architects use a variety of tools to bridge this gap. Each tool places different demands on the designer and each, through inherent characteristics and affordances, introduces reinterpretations of the design idea, thus imposing a divergence between the idea and the expression of the idea. Design is an activity that is greatly complex, and influenced by numerous factors. Most researchers of Mixed Realities (MRs) have focused on their use as presentation or simulation environments. It has been suggested that MR can empower designers to express, explore and convey their imagination more easily. For these reasons the very different nature of MR with its unique properties may allow architects and learners to create designs that other instruments do not offer. There has been inadequate exploration.
keywords	Learning, Communication, Interplay, Design Generation, Design Exploration
series	book
type	normal paper
email
more	http://www.springerlink.com/content/u750l4v886373567/fulltext.pdf
last changed	2009/03/06 11:58

_id	cf2011_p060
id	cf2011_p060
authors	Sheward, Hugo; Eastman Charles
year	2011
title	Preliminary Concept Design (PCD) Tools for Laboratory Buildings, Automated Design Optimization and Assessment Embedded in Building Information Modeling (BIM) Tools.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 451-476.
summary	The design of laboratory buildings entails the implementation of a variety of design constraints such as building codes; design guidelines and technical requirements. The application of these requires from designers the derivation of data not explicitly available at early stages of design, at the same time there is no precise methodology to control the consistency, and accuracy of their application. Many of these constraints deal with providing secure environmental conditions for the activities inside laboratories and their repercussions both for the building occupants and population in general, these constraints mandate a strict control over the building‚Äôs Mechanical Equipment (MEP), in particular the Heating Ventilating and Air Conditioning (HVAC) system. Due to the importance of these laboratory designers are expected to assess their designs not only according spatial relationships, but also design variables such as HVAC efficiency, air pressure hierarchies, operational costs, and the possible implications of their design decisions in the biological safety of the facility. At this point in time, there are no practical methods for making these assessments, without having constant interaction with HVAC specialists. The assessment of laboratory design variables, particularly those technical in nature, such as dimensioning of ducts or energy consumption are usually performed at late stages of design. They are performed by domain experts using data manually extracted from design information, with the addition of domain specific knowledge, the evaluation is done mostly through manual calculations or building simulations. In traditional practices most expert evaluations are performed once the architectural design have been completed, the turn around of the evaluation might take hours or days depending on the methods used by the engineer, therefore reducing the possibility for design alternatives evaluation. The results of these evaluations will give clues about sizing of the HVAC equipment, and might generate the need for design reformulations, causing higher development costs and time delays. Several efforts in the development of computational tools for automated design evaluation such as wheel chair accessibility (Han, Law, Latombe, Kunz, 2002) security and circulation (Eastman, 2009), and construction codes (ww.Corenet.gov.sg) have demonstrated the capabilities of rule or parameter based building assessment; several computer applications capable of supporting HVAC engineers in system designing for late concept or design development exist, but little has been done to assess the capabilities of computer applications to support laboratory design during architectural Preliminary Concept Design(PCD) (Trcka, Hensen, 2010). Developments in CAD technologies such as Building Information Modeling (BIM) have opened doors to formal explorations in generative design using rule based or parametric modeling [7]. BIM represents buildings as a collection of objects with their own geometry, attributes, and relations. BIM also allows for the definition of objects parametrically including their relation to other model objects. BIM has enabled the development of automated rule based building evaluation (Eastman, 2009). Most of contemporary BIM applications contemplate in their default user interfaces access to design constraints and object attribute manipulations. Some even allow for the application of rules over these. Such capabilities make BIM viable platforms for automation of design data derivation and for the implementation of generative based design assessment. In this paper we analyze the possibilities provided by contemporary BIM for implementing generative based design assessment in laboratory buildings. In this schema, domain specific knowledge is embedded in to the BIM system as to make explicit design metrics that can help designers and engineers to assess the performance of design alternatives. The implementation of generative design assessments during PCD can help designers and engineers to identify design issues early in the process, reducing the number of revisions and reconfigurations in later stages of design. And generally improving design performance.
keywords	Heating ventilating and Air Conditioning (HVAC), Building Information Models (BIM), Generative Design Assessment
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2009_000
id	ecaade2009_000
authors	Çagdas, Gülen; Çolakoglu, Birgül (eds.)
year	2009
title	COMPUTATION: The New Realm of Architectural Design
doi	https://doi.org/10.52842/conf.ecaade.2009
source	27th eCAADe Conference Proceedings [ISBN 978-0-9541183-8-9], Istanbul (Turkey) 16-19 September 2009, 854 p.
summary	In the field of architecture, computational design has emerged as sub-discipline having a multidisciplinary nature and using computing methods and capabilities to understand and solve architectural design problems. Computational design is based on computational thinking that includes a range of mental tools in solving problems, designing systems, and understanding human behavior. It has drawn on the concepts of mathematics and computer science. Computational design elements are derived from both theoretical science and experimental design in such a way that its mechanism relies heavily on mathematical logic, but once built, experimentation is done by varying one parameter at a time to study individual changes. It is a design model, not design itself. Computational design involves applying appropriate computational mechanisms, algorithms, or methods to architecture in order to solve design problems and develop design applications. This process creates systems that can be used as design tools for exploring and forming entirely new design concepts and strategies. Over the next decade, computation will have a great impact on design world. It will solve more complex design problems with greater accuracy and be applied by more designers more routinely—it will go deeper and wider. However, the greatest change that it will bring is the breaking down of barriers between scientific domains and design, enabling real “design science.” Computation is already a key driver in “joined-up” research. It forces scientists and designers to think deeper and wider. Some people have considered it to be the enemy of creativity. In their opinion, designers simply must do things rather than think about what they are doing and how they are doing it. Deeper thinking is associated with scientific rather than designer thinking. The fact is that some of the most innovative and creative work is being done by people who have developed computational thinking skills and know other disciplines along with computing. The theme of eCAADe 2009 conference, Computation: The New Realm of Architectural Design, is devoted to exploring the ramifications of this view for the domain of design: research, education, and practice. We believe that the most intriguing research questions that will emerge from the advent of new and more powerful computational devices—and from the design tools that make use of them—will be in the realm of developmental design science.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	acadia09_226
id	acadia09_226
authors	Benton, Sarah
year	2009
title	reForming: Responding to Our Land in Crisis
doi	https://doi.org/10.52842/conf.acadia.2009.226
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 226-233
summary	An environmental crisis in Australia in early 2009 prompted the architectural design work considered in this paper. Bushfires ravaged the Victorian hinterland, destroying lives and families. The crises inspired me to explore the ACADIA 2009 conference theme, reForm(): how technologies transform the ways in which buildings and spaces perform, act and operate. This paper explores architectural design in distressed contexts and some design technologies used to formalize new housing development and respond to the environmental crisis.
keywords	Parametric design, environment, design logic, landscape, biomimicry
series	ACADIA
type	Normal paper
email
last changed	2022/06/07 07:54

_id	acadia09_216
id	acadia09_216
authors	Wiebe, Kimberly; Kensek, Karen; Schiler, Marc
year	2009
title	SonoranSystems: Building Simulation Modeling Using a Crassulacean Acid Metabolism Analogy
doi	https://doi.org/10.52842/conf.acadia.2009.216
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 216-225
summary	Biomimicry is one source of inspiration for innovation in the passive thermal design of buildings and of strategies that decrease the need for auxiliary heating and cooling systems. This paper explores the potential for using analogies drawn from Crassulacean acid metabolism (CAM) to create a software program that simulates selected building materials to predict temporal building temperature variations.
keywords	Simulation, performance, solar, thermal design, parametric design
series	ACADIA
type	Normal paper
email
last changed	2022/06/07 07:57

_id	ascaad2009_wael_abdelhameed
id	ascaad2009_wael_abdelhameed
authors	Abdelhameed, Wael
year	2009
title	Assessment of a Physical Planning Project through Virtual Reality: A case study
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 365-378
summary	The study reports an application of VR models in the assessment of a part of physical planning project. The project outputs were different reports, GIS data and maps, and CAD drawings. The GIS data were used to create the VR models by importing Shpfiles of the GIS project outputs to VR software. The study presents VR models and the assessment of the physical planning project in terms of: 1) effect of the population increase, 2) effect of the required residential units, and 3) quality assurance for the current situation and future situation. The method used to build up the VR Models was through satellite images (by Google Earth Pro) and VR software (by UC Win/Road). Different models were built up to visualize and assess the alternative solutions and various influential factors. The study employed Virtual Reality in various urban and planning problems through models that are employed as tools of communication and design. The visualized environment and the associated models facilitated the evaluation of important areas, namely: impact of different factors and alternative solutions. The study concludes that the processes, such as decision making, visualization and representation, performed through VR manifest its importance to different design phases of urban and physical planning.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	sigradi2009_1086
id	sigradi2009_1086
authors	Abdelhameed, Wael; Yoshiro Kobayashi
year	2009
title	Urban Wiki: An online urban design system
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This research involves the framework and design of Urban Wiki, an online urban design system employing Wiki concept. The term Urban Wiki is created by the researchers; its concepts and methodology will be introduced and presented. Urban Wiki aims to creating a networking system of urban designs, enabling the collaborative work between users around the world. The presented system framework is created and tested by the researchers from two different locations in the world. The purpose of the research is to study how the users can share effectively designing/modeling large scale urban projects. An urban project of a village scale is used to demonstrate the potentials of Urban Wiki, presenting its functions and highlighting the possible uses in the urban area. Moreover, using the created models opens up various urban paths of designing, decision-making, and sharing. Techniques employed in the design of Urban Wiki can potentially be used to build up scalable, easily navigable and extensible models of large-scale entities.
keywords	Urban design; urban planning; networking; urban wiki; modeling systems
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ascaad2009_mai_abdelsalam
id	ascaad2009_mai_abdelsalam
authors	Abdelsalam, Mai
year	2009
title	The Use of the Smart Geometry through Various Design Processes: Using the programming platform (parametric features) and generative components
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 297-304
summary	The emergence of parametric generative design tools and prototyping manufacturing technology led to radical changes in architectural morphologies. This change increased the opportunity to develop innovative smart geometries. Integrating these algorithms in the parametric softwares led to variations in building design concepts increasing alternatives and decreasing the repetitive work previously needed in conventional CAD software. The chosen software in this research is Generative Components (GC). It is a software design tool for an associative and parametric design platform. It is tested for using Global Variables with associative functions during the concept creation and form GC comprises features. The results presented in this research may be considered an introduction to the smart geometry revolution. It deals with the generative design which applied in the design process from conceptual design phase, defining the problem, exploring design solutions, then how to develop the design phases. Office building is a building type which encourages new forms that needs computational processes to deal with repetitive functions and modular spaces and enclosed in a flexible creative structural skin. Generative design helps the office buildings to be arranged, analysed, and optimized using parameters in early stages in design process. By the end of the research, the use of the smart geometry in a high rise office building is defined and explained. The research is divided into three parts, first a summary of the basic theories of office buildings design and the sustainable requirements that affect it, and should be integrated. Secondly, the previous experiences in generating office buildings by Norman foster and Sergio Araya. At last, a case study is proposed to test and evaluate the use of the parametric generative methodology in designing an office building with specific emphasis on the function, environmental aspects and form generation using Generative Components (GC) Software.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ijac20097404
id	ijac20097404
authors	Achten, Henri H.
year	2009
title	Experimental Design Methods - A Review
source	International Journal of Architectural Computing vol. 7 - no. 4, 505-534
summary	Experimental design methods are applied in all phases of the design process and by almost every party involved in the design process. In this paper, we aim to give an overview of the background, applications, and technologies involved. A limited simple metric is introduced for assessing the degree of innovation. Future developments are outlined.
series	journal
last changed	2010/09/06 08:02

_id	acadia22pr_124
id	acadia22pr_124
authors	Ago, Viola; Tursack, Hans
year	2022
title	Understorey - A Pavilion in Parts
source	ACADIA 2022: Hybrids and Haecceities [Projects Catalog of the 42nd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-7-4]. University of Pennsylvania Stuart Weitzman School of Design. 27-29 October 2022. edited by M. Akbarzadeh, D. Aviv, H. Jamelle, and R. Stuart-Smith. 124-129.
summary	In the summer of 2018, our collaboration was awarded a University Design Fellowship from the Exhibit Columbus organization to design, fabricate, and build a large pavilion in Columbus, Indiana as part of a biannual contemporary architecture exhibition. Our proposal for the competition was a pavilion that would double as an ecological education center. Our inspiration for this program was triggered in part by our reading of Jane Bennett’s materialist philosophy outlined in her book Vibrant Matter (2009). Through Bennett’s lens, our design rendered our site’s context as an animate field, replete with pre-existing material composites that we wanted to celebrate through a series of displays, information boards, and artificial lighting. In this, the installation would feature samples of local plants, minerals, and rocks, indigenous to Southern Indiana.
series	ACADIA
type	project
email
last changed	2024/02/06 14:06

For more results click below: