Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 582

Reformat results as: short short into frame detailed detailed into frame

_id	cf2011_p060
id	cf2011_p060
authors	Sheward, Hugo; Eastman Charles
year	2011
title	Preliminary Concept Design (PCD) Tools for Laboratory Buildings, Automated Design Optimization and Assessment Embedded in Building Information Modeling (BIM) Tools.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 451-476.
summary	The design of laboratory buildings entails the implementation of a variety of design constraints such as building codes; design guidelines and technical requirements. The application of these requires from designers the derivation of data not explicitly available at early stages of design, at the same time there is no precise methodology to control the consistency, and accuracy of their application. Many of these constraints deal with providing secure environmental conditions for the activities inside laboratories and their repercussions both for the building occupants and population in general, these constraints mandate a strict control over the building‚Äôs Mechanical Equipment (MEP), in particular the Heating Ventilating and Air Conditioning (HVAC) system. Due to the importance of these laboratory designers are expected to assess their designs not only according spatial relationships, but also design variables such as HVAC efficiency, air pressure hierarchies, operational costs, and the possible implications of their design decisions in the biological safety of the facility. At this point in time, there are no practical methods for making these assessments, without having constant interaction with HVAC specialists. The assessment of laboratory design variables, particularly those technical in nature, such as dimensioning of ducts or energy consumption are usually performed at late stages of design. They are performed by domain experts using data manually extracted from design information, with the addition of domain specific knowledge, the evaluation is done mostly through manual calculations or building simulations. In traditional practices most expert evaluations are performed once the architectural design have been completed, the turn around of the evaluation might take hours or days depending on the methods used by the engineer, therefore reducing the possibility for design alternatives evaluation. The results of these evaluations will give clues about sizing of the HVAC equipment, and might generate the need for design reformulations, causing higher development costs and time delays. Several efforts in the development of computational tools for automated design evaluation such as wheel chair accessibility (Han, Law, Latombe, Kunz, 2002) security and circulation (Eastman, 2009), and construction codes (ww.Corenet.gov.sg) have demonstrated the capabilities of rule or parameter based building assessment; several computer applications capable of supporting HVAC engineers in system designing for late concept or design development exist, but little has been done to assess the capabilities of computer applications to support laboratory design during architectural Preliminary Concept Design(PCD) (Trcka, Hensen, 2010). Developments in CAD technologies such as Building Information Modeling (BIM) have opened doors to formal explorations in generative design using rule based or parametric modeling [7]. BIM represents buildings as a collection of objects with their own geometry, attributes, and relations. BIM also allows for the definition of objects parametrically including their relation to other model objects. BIM has enabled the development of automated rule based building evaluation (Eastman, 2009). Most of contemporary BIM applications contemplate in their default user interfaces access to design constraints and object attribute manipulations. Some even allow for the application of rules over these. Such capabilities make BIM viable platforms for automation of design data derivation and for the implementation of generative based design assessment. In this paper we analyze the possibilities provided by contemporary BIM for implementing generative based design assessment in laboratory buildings. In this schema, domain specific knowledge is embedded in to the BIM system as to make explicit design metrics that can help designers and engineers to assess the performance of design alternatives. The implementation of generative design assessments during PCD can help designers and engineers to identify design issues early in the process, reducing the number of revisions and reconfigurations in later stages of design. And generally improving design performance.
keywords	Heating ventilating and Air Conditioning (HVAC), Building Information Models (BIM), Generative Design Assessment
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ascaad2009_samir_foura
id	ascaad2009_samir_foura
authors	Foura, Samir and Samira Debache
year	2009
title	Thermal Simulation In Residential Building Within Computer Aided Architectural Design: Integrated model
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 235-243
summary	Nowadays, the architectural profession is seeking a better energy saving in the design of buildings. The fear of energy shortage in the very near future, together with the rapid rise in energy prices, put pressure on researchers on this field to develop buildings with more efficient heating systems and energy systems. This work is concerned mainly with the development of a software program analyzing comfort in buildings integrated in CAD architectural systems. The problem of presenting the computer with information concerning the building itself has been overcome through integration of thermal analysis with the building capabilities of CAD system. Mainly, such experience concerns the rules for calculating heat loss and heat gain of buildings in Algeria, The program has been developed in order to demonstrate the importance of the innovation of the computer aided-architectural-design field (CAAD) in the technology of buildings such as the three dimensional modeling offering environmental thermal analysis. CAAD is an integrated architectural design system which can be used to carry out many tasks such as working drawings, perspectives and thermal studies, etc., all from the same data. Results are obtained in tabular form or in graphical output on the visual display. The principle of this program is that all input data should be readily available to the designer at the early stages of the design before the user starts to run the integrated model. Particular attention is given to the analysis of thermal aspects including solar radiation gains. Average monthly energy requirement predictions have been estimated depending on the building design aspect. So, this integrated model (CAAD and simulation comfort) is supposed to help architects to decide on the best options for improving the design of buildings. Some of these options may be included at the early design stages analysis. Indications may also be given on how to improve the design. The model stored on CAAD system provides a valuable data base for all sort analytical programs to be integrated into the system. The amount of time and expertise required to use complex analytical methods in architectural practice can be successfully overcome by integration with CAAD system.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	sigradi2009_788
id	sigradi2009_788
authors	Marcos, Micheline Helen Cot
year	2009
title	Análise da Emissão de CO2 em Edificações através do Uso de uma Ferramenta CAD-BIM [Analysis of CO2 emission in construction using a CAD-BIM system]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	The main objective of this research is to determine through the use of a CAD-BIM system, the emission of CO2 in the pre-operational phase of construction. Based on a case study in quantitative analysis of materials and the BIM system, it was possible to quantify the amount of CO2 emitted during the pre-operational life cycle of a building. By using this feature you can provide, before the begining of construction, the total CO2 that will released to the environment, and other analysis.
keywords	Emissão de CO2; fase pré-operacional; ciclo de vida; CAD-BIM; ArchiCad
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	ecaade2009_095
id	ecaade2009_095
authors	Noriega, Farid Mokhtar; Fynn, JohnD.; McDonald-Rissanen, Mary
year	2009
title	UNITALKS: A Blended Learning Platform for University Specific Foreign Language Training for Architecture Students
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 349-356
doi	https://doi.org/10.52842/conf.ecaade.2009.349
wos	WOS:000334282200042
summary	The objective of the UNITALKS project is to develop a blended e-learning solution for foreign language training adapted to the university environment and to careers in architecture and building construction. Based on the VoiceForum project, an Internet or Intranet based platform, the approach aims to create an immersive task-based collaborative learning environment incorporating certain free software tools including a wiki repository where students and tutors can interactively and creatively enrich their learning community with new resources. UNITALKS is forward-looking in its recognition of the social as well as the technological dimension of an effective learning strategy and innovative in its approach to designing discipline-specific content tailored in a staged process to support maximum learner engagement and full operational ability in the professional context.
keywords	Education, mobility, task-based approach, blended learning, learning communities
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade2009_016
id	ecaade2009_016
authors	Sprecher, Aaron; Kalnitz, Paul
year	2009
title	From Formal to Behavioral Architecture: Few Notes on the Abstraction of Function
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 161-166
doi	https://doi.org/10.52842/conf.ecaade.2009.161
wos	WOS:000334282200019
summary	With the advent of information theories, contemporary architecture is approached in terms of the energetic formations of memorization, association and connection. The former architectural diagram becomes a concretization, an instance, one possibility, of an operational code. Memorization refers to the ability of architecture to embed information within the deepest composition of matter. Architectural performance has always been revealed by the integration, or association, of multiple parameters. Connections are vectors which fuse the knowledge of heterogeneous symbiotic human environments. In the “C-chair”, a project by our laboratory Open Source Architecture, abstract objects such as points, lines, and surfaces act as memorizers of information. As the codified system reacts to external forces, an association of two distinct graph structures is developed and connections are formed as the architectural object emerges.
keywords	Computational algorithm, information theory, computing design, energetic architecture, behavioral system
series	eCAADe
email
last changed	2022/06/07 07:56

_id	caadria2010_043
id	caadria2010_043
authors	Barker, Tom and M. Hank Haeusler
year	2010
title	Urban digital media: facilitating the intersection between science, the arts and culture in the arena of technology and building
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 457-466
doi	https://doi.org/10.52842/conf.caadria.2010.457
summary	The research presented in this paper investigates ways of providing better design applications for technologies in the field of Urban Digital Media (UDM). The work takes an emergent approach, evolving a design strategy through the early engagement of stakeholders. The paper discusses research in a design-led creative intersection between media technology, culture and the arts in the built environment. The case study discusses opportunities for the enhancement of a university campus experience, learning culture and community, through the provision of an integrated digital presence within campus architecture and urban spaces. It considers types of information architecture (Manovich, 2001) and designs for use in urban settings to create communication-rich, advanced and interactive designed spaces (Haeusler, 2009). The presented research investigates how to create a strategy for display technologies and networked communications to transform and augment the constructed reality of the built environment, allowing new formats of media activity.
keywords	Urban design; outdoor digital media; information architecture; multidisciplinary design; augmented reality; media facades
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ijac20097408
id	ijac20097408
authors	Biloria, Nimish; Valentina Sumini
year	2009
title	Performative Building Skin Systems: A Morphogenomic Approach Towards Developing Real-Time Adaptive Building Skin Systems
source	International Journal of Architectural Computing vol. 7 - no. 4, 643-676
summary	Morphogenomics, a relatively new research area, involves understanding the role played by information regulation in the emergence of diverse natural and artificially generated morphologies. Performative building skin systems as a bottom-up parametric formation of context aware interdependent, ubiquitously communicating components leading to the development of continually performative systems is one of the multi-scalar derivations of the aforementioned Morphogenomic understanding. The agenda of adaptations for these building skins specifically corresponds to three domains of adaptation: structural, behavioral and physiological adaptations resulting in kinetic adaptability, energy generation, conservation, transport and usage principles as well as material property based changes per component. The developed skins adapt in real time via operating upon ubiquitous communication and data-regulation protocols for sensing and processing contextual information. Computational processes and information technology based tools and techniques such as parametric design, real-time simulation using game design software, environmental information mapping, sensing and actuating systems coupled with inbuilt control systems as well as manufacturing physical models in collaboration with praxis form a vital part of these skin systems. These experiments and analysis based on developing intrinsic inter-dependencies between contextual data, structure and material logistics thus lay the foundation for a new era of continually performing, self powering, real-time adaptive intelligent building skin systems.
series	journal
last changed	2010/09/06 08:02

_id	caadria2009_111
id	caadria2009_111
authors	Biswas, Tajin; Ramesh Krishnamurti and Tsung-Hsien Wang
year	2009
title	Framework for Sustainable Building Design
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 43-52
doi	https://doi.org/10.52842/conf.caadria.2009.043
summary	For sustainable building design, computational tools, mostly in the form of simulations, are employed to determine loads and to predict systems performance typically in terms of energy use. Currently, sustainability, in the building domain, is judged by a rating system. Design choices are validated, by measuring against one. The objective of the framework is to provide a general approach to processing the informational needs of any rating system, by identifying, categorizing and organizing relevant data requirements. Aspects of sustainability that designers deal with intuitively will have a structured guideline and gauge as one selects a rating system of choice.
keywords	Sustainable design: rating system; framework; building information model
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2009_165
id	ecaade2009_165
authors	Cardoso, Daniel; Argun, Avni; Rocha, Carlos A.; Gonzalez, Jose
year	2009
title	Drawing Transparencies: ‘Responsible Responsiveness’ in Spaces Through Organic Electrochromism
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 83-88
doi	https://doi.org/10.52842/conf.ecaade.2009.083
wos	WOS:000334282200009
summary	A system for using organic polymers as electrochromic components for a building’s facade is proposed, and early prototypes are presented. The potentialities of such system, Croma, are considered in two aspects: a) as interactive facades that change opacity in reaction to touch –hence “drawing with transparency”- and b) as elements to automate energy-smart behaviors of a building. Some implications are discussed.
keywords	Responsive Surfaces, Smart-Materials, Interactive Architecture, Electrochromism
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2009_112
id	caadria2009_112
authors	Chen, Pei-Lin; Jen Yen
year	2009
title	A Color Combination Knowledge-Based System for Designer
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 737-745
doi	https://doi.org/10.52842/conf.caadria.2009.737
summary	The purpose of this paper is to investigate colour combination tools of visual communication designers’ need. Participants were twentythree students of Visual Communication Design Graduate School to follow the questionnaire survey and seven students of Design Doctoral Program Graduate School to follow the interview survey. The findings display that visual communication designers seldom use web-based colour combination systems. Based on the findings, we developed a colour combination support system: the adobe illustrator plug-in to proof this hypothesis. The databases of the tool use the book of “colour combination charts”, and the tool of this paper provides a personal database.
keywords	Colour; colour image; colour set; colour combination
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	caadria2009_078
id	caadria2009_078
authors	Chen, Zi-Ru
year	2009
title	Simplicity
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 361-370
doi	https://doi.org/10.52842/conf.caadria.2009.361
summary	The goal to reach Simplicity has been the key point of Human- Computer Interface since 1980s. In this research, we would like to know what Simplicity is and how to reach it. We used case studies to get two factors of Simplicity, which are the information modeling and the experience of perception through senses. Based on the factors, we implemented a prototype to refine the concepts of simplicity. The prototype was a new attempt to consider only the simplicity of HCI. Further research efforts on emotion, creativity, and aesthetics related to simplicity are important.
keywords	Human-computer interface; easy to use; ambient display
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2009_154
id	caadria2009_154
authors	Chiang, Shuo-Tao; Sheng-Fen Chien
year	2009
title	Notes on Designing Multi-Display spaces
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 461-470
doi	https://doi.org/10.52842/conf.caadria.2009.461
summary	This research attempts to integrate a new technology–Multi- Display Environment (MDE)–into the design and creation of new architectural spaces–multi-display spaces. The research objective is to formulate a set of design guidelines that advise designers on the effective use of the MDE technology, so that the technology may become a new design element and enables designers to show amplification effects of spaces. Two empirical studies are conducted. Based on the results of empirical studies, a set of multi-display space design guidelines is formulated with three key aspects: scene selection, display allocation and display arrangement. The design guidelines require further validations through practical applications. Nevertheless, the research introduces a new design element for designers to think about the future of architectural spaces with more opportunities and possibilities.
keywords	Multi-display environments; spatial cognition; design guidelines
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ascaad2009_tomohiro_fukuda
id	ascaad2009_tomohiro_fukuda
authors	Fukuda, Tomohiro
year	2009
title	Analysis of a Mixed Reality Display for Outdoor and Multi-User Implementation
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 323-333
summary	This research describes a tool which can be used outdoors instead of a paper medium by a group of people to facilitate city tour guiding or design studies. First, the problems of the device and software which constitute the developed outdoor type MR (Mixed Reality) system were considered. Problems regarding the display, sensor, and composition with video and 3DCG images were clarified. In addition, taking account of the problem that the display is dark outdoors, the luminosity of a number of displays was measured in a dark room and outdoors. In addition to the dark room contrast ratio, the importance of ambient contrast was highlighted through the experiment.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ecaade2009_014
id	ecaade2009_014
authors	Haeusler, Matthias Hank
year	2009
title	Media-Augmented Surfaces: Embedding Media Technology into Architectural Surface to Allow a Constant Shift between Static Architectural Surface and Dynamic Digital Display
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 483-490
doi	https://doi.org/10.52842/conf.ecaade.2009.483
wos	WOS:000334282200058
summary	The way screens are attached to architecture at present limits architectural surfaces to carriers of signs. The research presented in this paper offers a possible solution that allows architectural surfaces to be both a space-defining element that has certain architectural material qualities and at the same time allows media technology to be embedded. These surfaces can alter their state from static material to dynamic image in an instance. The paper presents a prototype capable of fulfilling this requirement. It also positions the research within the architectural discussion by comparing it to works of others and confirming its research value by reference to work in a similar direction. Finally, the paper evaluates the research and concludes that it could offer a ‘fabric’ to be used as a sort of media clothing for architecture in the electronic age (Ito, 2001).
keywords	Media facade technology, media-augmented spaces, architectural screen design, media architecture, digital displays
series	eCAADe
email
last changed	2022/06/07 07:51

_id	acadia09_291
id	acadia09_291
authors	Hemsath, Timothy L.; McCracken, Brian; Russell, Darin
year	2009
title	Decon Recon: Parametric CADCAM Deconstruction Research
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 291-293
doi	https://doi.org/10.52842/conf.acadia.2009.291
summary	The deconstruction (DeCon) and repurposing (ReCon) of existing structures and materials are worthwhile and relevant endeavors given the potential for such procedures to be more economically and environmentally sustainable than conventional construction methods. Conventional construction methods often utilize virgin materials for the production of architecture, requiring extensive energy to harvest, process, and manufacture the materials for use. Today, we must face the fact that we exist in a carbon-sensitive economy, and demand design approaches that reduce architecture’s impact on the environment. Our goal was to develop a CADCAM ReCon design methodology that would have the potential to mitigate carbon consumption. To explore this goal, students engaged a design research project that looked for novel and innovative approaches to the DeCon and ReCon of an existing barn. The student researchers created parametric models and surface designs derived from the existing materials. The digitally fabricated tectonic design constructions resulted in economical, novel, and material-efficient design methodologies for DeCon and ReCon.
keywords	Fabrication, environment, CADCAM, Parametric Design
series	ACADIA
type	Short paper
email
last changed	2022/06/07 07:49

_id	sigradi2009_636
id	sigradi2009_636
authors	Hernández, Patricia; Verón; Mengo; Figueroa; Carmigiani; D´alessandro y Lanzone y Swendsen Arquitectos
year	2009
title	Microarquitectura - Equipo Domotizado para Exhibicion en Librería [Micro-architecture - Domotized Equipment for Bookstore Display]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	The working team is comprised of professionals and students from Engineering and Architecture degree courses. This group, participating at a certified research by Secretaría de Ciencia y Técnica de la Nación, have agreed to carry out a joint designing experience about a micro-architecture prototype to be domotized by the Chair of Automation of Mechanical Engineering.We have designed a display equipment for local bookstores. The equipment in itself is ductile and useful to build a stand. It can be easily coupled and divided into modules for shop windows and different spaces within stores. It is changeable, flexible, and its arrangement is dynamic. The design contemplates general sample functions according to the various sizes of the product, which range from small to large-scale objects.The equipment offers its own domotic features.
keywords	domótica; exhibición; ambientalismo; interdisciplina; gráfica 3D animada
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	acadia09_130
id	acadia09_130
authors	Kimpian, Judit; Mason, Josh; Coenders, Jeroen; Jestico, Dan; Watts, Steve
year	2009
title	Sustainably Tall: Investment, Energy, Life Cycle
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 130-143
doi	https://doi.org/10.52842/conf.acadia.2009.130
summary	The purpose of this project is to provide an interactive platform for clients and design teams to evaluate the consequences of shape, form, and briefing decisions on the energy use, embodied energy, and capital / life-cycle cost of a tall building early in the design process. The Tall Building Simulation (TBS) model is the result of a collaborative partnership between Aedas, Arup, Hilson Moran (HM), and Davis Langdon (DL). It is estimated that most decisions determining the sustainability of a project are made in the first 1 percent of a project’s program, whereas the majority of the information required for sustainability assessment is not usually available or examined until after the concept stage. By this time, most solutions would need design or briefing changes that are too costly to implement. Using the TBS model, architects, engineers, and clients can simultaneously explore the impact of typical technical and design decisions on a tall building’s energy footprint and its dynamic relationship to cost at the briefing stage.
keywords	Design evaluation, environmental impact, energy, simulation
series	ACADIA
type	Normal paper
email
last changed	2022/06/07 07:52

_id	sigradi2009_779
id	sigradi2009_779
authors	Lima, Thais Borges Sanches; Cláudia Naves David Amorim; Giselle Marie Cormier Chaim
year	2009
title	Simulação do Desempenho Energético de Edifícios de Escritórios em Brasília [Energy performance simulation of Brasília’s office buildings]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This paper presents a parametric analysis where WWR and color glass was varied to determine their influence in the thermal performance of an office building’s room. Design Builder tool was used to calculate the thermal load and the internal gains. The WWR variation in different orientations resulted in a significant increase of the thermal load. The reflective glass allowed a better thermal performance of the room. With the use of computer simulation was possible to analyse many constructive and design characteristics of the facade and its influence on the results, when considered together.
keywords	Energy performance; office buildings; computer simulation; Design Builder
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	sigradi2009_795
id	sigradi2009_795
authors	Lyon, Arturo; Claudio Labarca
year	2009
title	Modular Flow; Hard on parametrics
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	The design and fabrication of an exhibition display project was taken as an opportunity to explore parametric design with a group of students in Chile. This article presents the experience of a design studio workshop exercise by addressing the introduction of parametric design principles and the development of a built academic project through a team based design and fabrication process. The strategy followed by the team was to utilize parametric models as a mean to materialize driving variables of the project into unexpected geometries to be deployed in different public spaces in Santiago. Context, time scale and available technology resulted in a non-obvious combination of advanced digital design and fabrication techniques and low-cost mass-produced materials.
keywords	parametric; design; experimental; architecture; Chile
series	SIGRADI
email
last changed	2016/03/10 09:55

For more results click below: