Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 593

Reformat results as: short short into frame detailed detailed into frame

_id	acadia21_444
id	acadia21_444
authors	Crawford, Assia
year	2021
title	Mitochondrial Matrix
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 444-453.
doi	https://doi.org/10.52842/conf.acadia.2021.444
summary	The following project was created as part of an art residency with the Wellcome Centre for Mitochondrial Research (WCMR) at Newcastle University. The WCMR specializes in leading-edge research into mitochondrial disease, investigating causes, treatments, and ways of avoiding hereditary transmission. Mitochondria is believed to have started off as a separate species that through symbiosis came to be the powerhouse of each cell in our bodies (Hird 2009). Mitochondrial disease is a genetic disorder that is caused by genetic mutations of the DNA of the mitochondria or the cell that in turn affects the mitochondria (Bolano 2018). Mitochondria is a hereditary condition and can affect people at different stages in their lives. It can affect various organs and has a link to various types of conditions. Therefore, the patient experience is unique to each individual and the elusive nature of the condition can make it particularly challenging due to the complexity of the disorder as well as the inaccessible scale on which these variations occur (Chinnery 2014)
series	ACADIA
type	project
email
last changed	2023/10/22 12:06

_id	ascaad2009_wael_abdelhameed
id	ascaad2009_wael_abdelhameed
authors	Abdelhameed, Wael
year	2009
title	Assessment of a Physical Planning Project through Virtual Reality: A case study
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 365-378
summary	The study reports an application of VR models in the assessment of a part of physical planning project. The project outputs were different reports, GIS data and maps, and CAD drawings. The GIS data were used to create the VR models by importing Shpfiles of the GIS project outputs to VR software. The study presents VR models and the assessment of the physical planning project in terms of: 1) effect of the population increase, 2) effect of the required residential units, and 3) quality assurance for the current situation and future situation. The method used to build up the VR Models was through satellite images (by Google Earth Pro) and VR software (by UC Win/Road). Different models were built up to visualize and assess the alternative solutions and various influential factors. The study employed Virtual Reality in various urban and planning problems through models that are employed as tools of communication and design. The visualized environment and the associated models facilitated the evaluation of important areas, namely: impact of different factors and alternative solutions. The study concludes that the processes, such as decision making, visualization and representation, performed through VR manifest its importance to different design phases of urban and physical planning.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	sigradi2009_1086
id	sigradi2009_1086
authors	Abdelhameed, Wael; Yoshiro Kobayashi
year	2009
title	Urban Wiki: An online urban design system
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This research involves the framework and design of Urban Wiki, an online urban design system employing Wiki concept. The term Urban Wiki is created by the researchers; its concepts and methodology will be introduced and presented. Urban Wiki aims to creating a networking system of urban designs, enabling the collaborative work between users around the world. The presented system framework is created and tested by the researchers from two different locations in the world. The purpose of the research is to study how the users can share effectively designing/modeling large scale urban projects. An urban project of a village scale is used to demonstrate the potentials of Urban Wiki, presenting its functions and highlighting the possible uses in the urban area. Moreover, using the created models opens up various urban paths of designing, decision-making, and sharing. Techniques employed in the design of Urban Wiki can potentially be used to build up scalable, easily navigable and extensible models of large-scale entities.
keywords	Urban design; urban planning; networking; urban wiki; modeling systems
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ascaad2014_023
id	ascaad2014_023
authors	Al-Maiyah, Sura and Hisham Elkadi
year	2014
title	Assessing the Use of Advanced Daylight Simulation Modelling Tools in Enhancing the Student Learning Experience
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 303-313
summary	In architecture schools, where the ‘studio culture’ lies at the heart of students’ learning, taught courses, particularly technology ones, are often seen as secondary or supplementary units. Successful delivery of such courses, where students can act effectively, be motivated and engaged, is a rather demanding task requiring careful planning and the use of various teaching styles. A recent challenge that faces architecture education today, and subsequently influences the way technology courses are being designed, is the growing trend in practice towards environmentally responsive design and the need for graduates with new skills in sustainable construction and urban ecology (HEFCE’s consultation document, 2005). This article presents the role of innovative simulation modelling tools in the enhancement of the student learning experience and professional development. Reference is made to a teaching practice that has recently been applied at Portsmouth School of Architecture in the United Kingdom and piloted at Deakin University in Australia. The work focuses on the structure and delivery of one of the two main technology units in the second year architecture programme that underwent two main phases of revision during the academic years 2009/10 and 2010/11. The article examines the inclusion of advanced daylight simulation modelling tools in the unit programme, and measures the effectiveness of enhancing its delivery as a key component of the curriculum on the student learning experience. A main objective of the work was to explain whether or not the introduction of a simulation modelling component, and the later improvement of its integration with the course programme and assessment, has contributed to a better learning experience and level of engagement. Student feedback and the grade distribution pattern over the last three academic years were collected and analyzed. The analysis of student feedback on the revised modelling component showed a positive influence on the learning experience and level of satisfaction and engagement. An improvement in student performance was also recorded over the last two academic years and following the implementation of new assessment design.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ascaad2009_hussein_albotany
id	ascaad2009_hussein_albotany
authors	Albotany, Hussein S.
year	2009
title	Development of Digital City Models Using 3d GIS
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 409-418
summary	“Digital city” is a copy of an actual city in the virtual space. It is expected to play an important role in urban planning, disaster simulation etc. Recent advanced remote sensing technologies, which are capable to quickly provide detailed information of city areas, ease the construction of 3D city models. Urbanization has evinced interest from a wide section of the society including experts, amateurs and novices. With the development and infrastructure initiatives mostly around the urban centers, the impacts of urbanization and sprawl would be on the environment and the natural resources. The research introduces an application of 3D GIS on Manama City.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	sigradi2009_037
id	sigradi2009_037
authors	Aroztegui Massera, Carmen; Rodrigo García Alvarado; María Isabel López
year	2009
title	El Storyboard y el Animatic en la Enseñanza del Proyecto de Arquitectura [Storyboarding and Animatics in Architectural Education]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This paper discusses the issues involved with the introduction of the storyboard and the animatic in a design studio exercise. Storyboards - sketches used in film planning -, and the animatic - basically a moving storyboard - allow the student to understand space within in the context of a narrative. The purpose of the exercise was to enable the expression of subjectively experienced space in an early stage of urban context analysis. Differently than the traditional approach to animation which results a camera traveling through a path, the exercise approached animation from the perspective of the stories about the place.
keywords	storyboard; animatic; education; architecture studio
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2010_043
id	caadria2010_043
authors	Barker, Tom and M. Hank Haeusler
year	2010
title	Urban digital media: facilitating the intersection between science, the arts and culture in the arena of technology and building
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 457-466
doi	https://doi.org/10.52842/conf.caadria.2010.457
summary	The research presented in this paper investigates ways of providing better design applications for technologies in the field of Urban Digital Media (UDM). The work takes an emergent approach, evolving a design strategy through the early engagement of stakeholders. The paper discusses research in a design-led creative intersection between media technology, culture and the arts in the built environment. The case study discusses opportunities for the enhancement of a university campus experience, learning culture and community, through the provision of an integrated digital presence within campus architecture and urban spaces. It considers types of information architecture (Manovich, 2001) and designs for use in urban settings to create communication-rich, advanced and interactive designed spaces (Haeusler, 2009). The presented research investigates how to create a strategy for display technologies and networked communications to transform and augment the constructed reality of the built environment, allowing new formats of media activity.
keywords	Urban design; outdoor digital media; information architecture; multidisciplinary design; augmented reality; media facades
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2009_042
id	ecaade2009_042
authors	Barlieb, Christophe; Richter, Christoph; Greschner, Björn; Tamke, Martin
year	2009
title	Whispering Wind: Digital Practice and the Sustainable Agenda
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 543-550
doi	https://doi.org/10.52842/conf.ecaade.2009.543
wos	WOS:000334282200065
summary	Low frequency noise generated by aircraft during pre-takeoff, takeoff, landing and post-landing operations equates to high levels of undesirable ground noise pollution. This phenomenon is gaining heightened popular interest among air transportation specialists and agencies as urban settlements and airports expand beyond post-war city limits to meet demands of the 21st Century. This paper highlights the advantages of employing digital tools in tight collaboration with academics and professionals at the early stages of the design process and revisits ancient architectural design strategies to arrive at more meaningful and sustainable architectural interventions.
keywords	Acoustic, architecture, opensource, passive design, sustainability
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2009_887
id	sigradi2009_887
authors	Barría Chateau, Hernán Alberto; Rodrigo García Alvarado; Cecilia Poblete Arrendondo
year	2009
title	Anarquitectura Digital [Digital Anarchitecture]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This article reviews the work and the artistic and architectural context of the artist Gordon Matta-Clark. It checks the context as well as the urban and social conditions of his interventions, to place these works in contemporary culture. In particular this paper analyzes “Splitting”, Matta-Clark´s work that synthesizes his critical attitude to the Modern condition; using computational techniques of geometric modeling, visualization, graphics, digital manufacturing and structural analysis to explore and determine the formal rules and materials used by the artist to develop actions with significant spatial and social connotations.
keywords	Anarchitecture; Modeling; Visualization; Digital Manufacturing; Structural Analysis
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2009_124
id	ecaade2009_124
authors	Beirão, José Nuno; Duarte, José Pinto; Stouffs, Rudi
year	2009
title	An Urban Grammar for Praia: Towards Generic Shape Grammars for Urban Design
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 575-584
doi	https://doi.org/10.52842/conf.ecaade.2009.575
wos	WOS:000334282200069
summary	This paper presents a shape grammar for planned urban spaces intending an implementation for generative urban design. This implementation will form part of an urban design support tool defined to formulate, generate and evaluate urban designs. The goal is to formulate urban program descriptions according to context conditions using a description grammar and generate alternative design solutions using a shape grammar. The generation is guided by several evaluation processes performed by an evaluation module. In this paper we are focusing on the definition of the generic shape grammar using an existent urban plan as a case study. The aim is to encode the design moves of the urban designer into generic grammar rules amenable for specific instantiations through the customization of rule parameters.
keywords	Shape grammars, patterns, generative urban design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cf2009_890
id	cf2009_890
authors	Beirão, José; Duarte José, Stouffs Rudi
year	2009
title	Grammars of designs and grammars for designing - grammar-based patterns for urban design
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009
summary	Analytical work has demonstrated the potential of shape grammars for capturing rules embedded in existing design styles, and generating designs within such styles that match given design contexts. However, the creation of grammars for new design styles, from exploratory rules to design synthesis, remains elusive. The combined use of patterns and discursive grammars is here proposed as a way of encoding the semantics behind recurrent urban design operations and enable the development of a tool to support the creation of new grammars. The idea is that by exploring the combination of generative patterns designers may arrive at new grammars.
series	other
type	normal paper
email
last changed	2009/08/21 07:43

_id	ascaad2016_013
id	ascaad2016_013
authors	Belkis Öksüz, Elif
year	2016
title	Parametricism for Urban Aesthetics - A flawless order behind chaos or an over-design of complexity
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 105-112
summary	Over the last decade, paradigm shifts in the philosophy of space-time relations, the change from space-time to spatio-temporality, caused significant changes in the design field, and introduced new variations and discourses for parametric approaches in architecture. Among all the discourses, parametricism is likely the most spectacular one. The founder of parametricism, Patrik Schumacher (2009) describes it as “a new style,” which has “the superior capacity to articulate programmatic complexity;” and “aesthetically, it is the elegance of ordered complexity in the sense of seamless fluidity.” In its theoretical background, Schumacher (2011) affiliates this style with the philosophy of autopoiesis, the philosophy that stands between making and becoming. Additionally, parametricism concerns not only the physical geometry in making of form; but also discusses the relational and causal aspects in becoming of form. In other words, it brings the aesthetic qualities in making through the topological intelligence behind becoming. Regarding that, parametricism seems an effective way of managing /creating complex topologies in form-related issues. However, when it comes to practice, there are some challenging points of parametricism in large-scale design studies. Thus, this work underlines that the dominance of elegance for urban planning has the potential of limiting the flexible and dynamic topology of the urban context, and objectifying the whole complex urban form as an over-designed product. For an aesthetic inquiry into urban parametricism, this paper highlights the challenging issues behind the aesthetic premises of parametricism at the urban design scale. For that, Kartal Master Plan Design Proposal by Zaha Hadid Architects (2006) will be discussed as an exemplary work.
series	ASCAAD
email
last changed	2017/05/25 13:31

_id	ascaad2009_mustapha_ben_hamouche
id	ascaad2009_mustapha_ben_hamouche
authors	Ben-Hamouche, Mustapha
year	2009
title	Gis in Architectural Education: Design as a place-making process
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 393-407
summary	Responsiveness to site conditions and environment is one of the axioms of architectural design. However, most students’ design is made in a non-geo-coordinated cyberspace through CAAD design and thus leading to “flying” proposals” that are not attached to the context. GIS teaches students in architecture to initially refer to real locations as the space in which they design is geo-coordinated and provides the wider context of the project. Along the design process, the project surroundings from macro scale; that is the globe, to the micro-scale that is reflected in the existing buildings, the road network and the topography are constantly present. At the end stage, the project is seen not as a free standing building but rather as an integral part in a real place on Earth. The 3-D urban visualization gives the possibility of evaluating the degree of success of place-making and the fitness of the project to its context. The aim of the paper is to present how a GIS course can support CAAD and improve the architectural design process as well as the quality of the design output towards a contextual architecture. The paper is based on the experience of the author who is architects and urban planner, in teaching design studios and Urban Planning based on GIS as an elective course to graduating students in architecture at the University of Bahrain. It presents an alternative method that is called Permanent Presence of the Real World PPRW.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2009_017
id	caadria2009_017
authors	Bruton, Dean
year	2009
title	On Distributed Network Rendering Systems
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 65-74
doi	https://doi.org/10.52842/conf.caadria.2009.065
summary	This paper reports an investigation of the establishment and performance of a distributed computer rendering system for advanced computer graphics production within a centralized university information technology environment. It explores the proposal that the use of distributed computer rendering systems in industry and universities offers synergies for university-industry collaborative agreements. Claims that cluster computing and rendering systems are of benefit for computer graphics productions are to be tested within a standard higher education environment. A small scale distributed computer rendering system was set up to investigate the development of the optimum use of intranet and internet systems for computer generated feature film production and architectural visualisation. The work entailed using monitoring, comparative performance analysis and interviews with relevant stakeholders. The research provides important information for practitioners and the general public and heralds the initiation of a Centre for Visualization and Animation research within the School of Architecture, Landscape Architecture and Urban Design, University of Adelaide.
keywords	Render farm, processing, computer graphics, animation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2009_904
id	sigradi2009_904
authors	Castañe, Maria Dora; Carlos Tessier
year	2009
title	Reconocimiento Patrimonial de Ciudad Intermedia Utilizando Base de Datos Espaciales, y Modelos Urbanos Virtuales [Heritage recognition of intermediate city - Using space data base, and virtual urban models]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This project advances in the research on the urban architectonic cultural heritage of one Buenos Aires intermediate city in order to obtain some lines of proposals on policies of action applied to the chosen city. It is taken as training center of MERCEDE’S city, located in the nor west of Buenos Aires province –Argentina. Within the project digital technological tools of three-dimensional modelling are used and their interphases of space bases with different representational levels of complexity 2d-3d-4d-5d, applied to the recognition and research of the cultural and urban architectonic heritage These would allow to qualify to facilitate other ways to research rescue and re-construct the city, for one better understanding of their present and past.
keywords	Patrimonio; base de datos espaciales; urbanismo; hipermedios; preservación
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	sigradi2009_964
id	sigradi2009_964
authors	Castriota, Leonardo Barci; Rezende
year	2009
title	Fotografia digital e imagens multi-perspectivas no estudo de sítios históricos [Digital photography and multi-perspective image in the study of historical sities]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	The creation of panoramic images for depicting urban landscape is a technique that has its origins in Antiquity. These images, which are known to represent large urban areas from multiple views, can be considered true works of art. Recently there has been a growing interest by some researchers, especially in the area of computer graphics, in the production of multi-perspective images for representing historic sites. However, the focus of these studies has been especially the computational aspects of this process, and there are few studies that address the impact and possibilities of these methodologies in historic preservation and urban planning. Realizing this shortcoming and considering the demand for a perspective more connected to cultural heritage, our proposal is to associate the excellent visual results of the multi-perspective images to the rich possibilities of computer simulation that can provide digital photography. The fact is that in recent years we have experienced technological innovations in the field of computer simulation that far exceeded our expectations. While most surveys of buildings are still based on the use of tape measure, pencil, paper and camera, the computer has become increasingly the main interface between the user and the information and is now the preferred instrument for the production and viewing of images, including the creation of virtual environments. Thus, this work seeks to explore the great potential which seems to exist in the combination of digital photography and the technique of multi-perspective image representation, which may provide new approaches and perspectives for the field of historic preservation. For that, we present a rapid and low cost methodology, developed in recent years, which generates orthophotos and metric multi-perspective images, useful for the analysis of built heritage and historic sites. In addition to that, we will also discuss further possible byproducts of this methodology, among which we could highlight the creation of three-dimensional models, and the analysis of building pathologies in combination with thermal photography. As a case study, we will present a representation of the Rua dos Caetés, a listed historic district in Belo Horizonte (MG), Brazil.
keywords	Photogametry; Digital Photography; Heritage; Conservation
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	cf2011_p135
id	cf2011_p135
authors	Chen Rui, Irene; Schnabel Marc Aurel
year	2011
title	Multi-touch - the future of design interaction
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 557-572.
summary	The next major revolution for design is to bring the natural user interaction into design activities. Graphical User Interfaces (GUI) brought a new approach that was more effective compared to their conventional predecessors. In recent years, Natural User Interfaces (NUI) have advanced user experiences and multi-touch and gesture technologies provide new opportunities for a variety of potential uses in design. Much attention has been paid to leverage in the design of interactive interfaces. The mouse input and desktop screen metaphors limit the information sharing for multiple users and also delayed the direct interaction for communication between each other. This paper proposes the innovative method by integrating game engine ‘Unity3D’ with multi-touch tangible interfaces. Unity3D provides a game development tool as part of its application package that has been designed to let users to focus on creating new games. However, it does not limit the usage of area to design additional game scenarios since the benefits of Unity3D is allowing users to build 3D environments with its customizable and easy to use editor, graphical pipelines to openGL (http://unity3d.com/, 2010 ). It creates Virtual Reality (VR) environments which can simulates places in the real world, as well as the virtual environments helping architects and designers to vividly represent their design concepts through 3D visualizations, and interactive media installations in a detailed multi-sensory experience. Stereoscopic displays advanced their spatial ability while solving issues to design e.g. urban spaces. The paper presents how a multi-touch tabletop can be used for these design collaboration and communication tasks. By using natural gestures, designers can now communicate and share their ideas by manipulating the same reference simultaneously using their own input simultaneously. Further studies showed that 3Dl forms are perceived and understood more readily through haptic and proprioceptive perception of tangible representations than through visual representation alone (Gillet et al, 2005). Based on the authors’ framework presented at the last CAADFutures, the benefits of integrating 3D visualization and tactile sensory can be illustrated in this platform (Chen and Wang, 2009), For instance, more than one designer can manipulate the 3D geometry objects on tabletop directly and can communicate successfully their ideas freely without having to waiting for the next person response. It made the work more effective which increases the overall efficiency. Designers can also collect the real-time data by any change they make instantly. The possibilities of Uniy3D make designing very flexible and fun, it is deeply engaging and expressive. Furthermore, the unity3D is revolutionizing the game development industry, its breakthrough development platform for creating highly interactive 3D content on the web (http://unity3d.com/ , 2010) or similar to the interface of modern multimedia devices such as the iPhone, therefore it allows the designers to work remotely in a collaborative way to integrate the design process by using the individual mobile devices while interacting design in a common platform. In design activities, people create an external representation of a domain, often of their own ideas and understanding. This platform helps learners to make their ideas concrete and explicit, and once externalized, subsequently they reflect upon their work how well it sits the real situation. The paper demonstrates how this tabletop innovatively replaces the typical desktop metaphor. In summary, the paper addresses two major issues through samples of collaborative design: firstly presenting aspects of learners’ interactions with physical objects, whereby tangible interfaces enables them constructing expressive representations passively (Marshall, 2007), while focussing on other tasks; and secondly showing how this novel design tool allows designers to actively create constructions that might not be possible with conventional media.
keywords	Multi-touch tabletop, Tangible User Interface
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2009_174
id	caadria2009_174
authors	Chen, Chiung-Hui
year	2009
title	A Prototype Using Multi-Agent Based Simulation in Spatial Analysis and Planning
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 513-521
doi	https://doi.org/10.52842/conf.caadria.2009.513
summary	Pedestrian’s movements and spatial cognition in urban environments are main issues for urban designers in urban spatial planning and analysis. This paper aims to study interactions between a behavioural model of pedestrians and urban spaces. The pedestrians can be represented by an agent program, and behavioural reactions of walking agents under different stimulus can be further simulated. Thus, this study suggests that, a correlation study on pedestrian behaviours and spatial environments become the criterion for urban designers in order to help them create better flows.
keywords	Spatial analysis, multi-agent, behaviour, simulation
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	caadria2009_208
id	caadria2009_208
authors	Chen, Irene Rui; Marc Aurel Schnabel
year	2009
title	Retrieving Lost Space With Tangible Augmented Reality
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 135-142
doi	https://doi.org/10.52842/conf.caadria.2009.135
summary	Tangible Augmented Reality can be an innovative way for designers to understand the spatial conception. Due to the high integration of tactile and vision, this realm allows users to gain a better understanding how to retrieve ‘lost space’ in an urban context. By using a variety of visualisation methods, such as wireframe and transparencies, hidden or other ways unperceivable (lost) space is made available. With the aid of Tangible Augmented Reality designers are subsequently able to evaluate the design context and its solution more holistically. This paper argues that the retrieval of lost space enhances the design communication.
keywords	Tangible augmented reality; tangible user interface; augmented reality
series	CAADRIA
email
last changed	2022/06/07 07:55

For more results click below: