Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 591

Reformat results as: short short into frame detailed detailed into frame

_id	acadia13_109
id	acadia13_109
authors	Thün, Geoffrey; Velikov, Kathy
year	2013
title	Adaptation as a Framework for Reconsidering High-Performance Residential Design: A Case Study
doi	https://doi.org/10.52842/conf.acadia.2013.109
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 109-118
summary	This paper outlines an approach to adaptive residential design explored through recent research and an executed prototype, the North House project (2007-2009), undertaken through an interdisciplinary collaboration of researchers and students from the University of Waterloo, Ryerson University and Simon Fraser University in concert with professional and industry partners. This project aimed to develop a framework for the delivery of adaptive detached residential buildings capable of net-zero energy performance in the temperate climate zone, or the near north. Within this project, the term “adaptive” is developed across several tracts of conceptualization and execution including site and climatically derived models for building material composition and envelope ratios, environmentally-responsive kinetic envelope components, intelligent HVAC controls and interactive interface design aimed at producing co-evolutionary behaviors between building systems and inhabitants. A provisional definition of adaptive architecture is outlined to address this range of considerations that calls into question the stable image of domestic architecture and its relationship to energy and contemporary assumptions regarding sustainable design. This paper also outlines computational approaches to design optimization, distributed building systems integration and the human-controls interfaces applicable to the home’s ecology of physical and information technologies.
keywords	next generation technology, responsive buildings, high performance envelopes, sensing and feedback, passive and active systems, energy modeling, user interface
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:58

_id	ecaade2009_110
id	ecaade2009_110
authors	van der Maas, David; Meagher, Mark; Abegg, Christian; Huang, Jeffrey
year	2009
title	Thermochromic Information Surfaces: Interactive Visualization for Architectural Environments
doi	https://doi.org/10.52842/conf.ecaade.2009.491
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 491-496
summary	In this paper we describe a series of nine prototypes that were constructed to explore the benefits and limitations of thermochromic ink as a material for the design of architectural information surfaces. Among the goals of the project were the identification of inexpensive fabrication methods that could be used to build thermochromic surfaces at the scale of a room. Our primary design concerns were the ability to communicate information about indoor climate, and the integration of the information surfaces in an architectural environment. We propose a method for building thermochromic surfaces based on printed circuit boards (PCB) that is cost-effective, highly precise, and allows the fabrication of large surfaces through tiling.
wos	WOS:000334282200059
keywords	Thermochromic display, interactive architecture, information visualization, fabrication process, communication
series	eCAADe
email
last changed	2022/06/07 07:58

_id	cf2009_poster_33
id	cf2009_poster_33
authors	Vanzer, Paul Martin
year	2009
title	Transformation of Housing in the ecology of desert climate: A Bioclimatic -Passive Solar Design vision of the Building integration with a dry environment
source	T. Tidafi and T. Dorta (eds) Joining Languages Cultures and Visions: CAADFutures 2009 CD-Rom
summary	This investigation arises from the need to include the systems of environmental natural conditioning and the architectural project in the ecology of the desert dry-climate. In this research, it is proposed to investigate the main features and techniques used in Southern Peru as an answer to build in a desert environment with high levels of sunlight and very few rain days. Identifying the historic processes of the vernacular architecture, in which we recognize evolved coherent forms, making possible to define the strategies with which to recreate architecture responsive to the ecology of the desert dry- climate.
keywords	Bioclimatic architecture, architecture in desert regions, solar architecture, sustainability, architecture and climate vernacular architecture
series	CAAD Futures
type	poster
last changed	2009/07/08 22:12

_id	ascaad2009_000
id	ascaad2009_000
authors	Abdelhameed, Wael; N. Hamza and A. Bennadji (eds.)
year	2009
title	Digitizing Architecture: Formalization and Content
source	4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009)[ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, 463 p.
summary	CAAD is constantly provoking and raising many potentials, challenges and arguments in academia, practice, and even in the theory of architecture itself. This process starts with the pedagogy of designing and the ongoing questions such as how much of CAAD should be incorporated in teaching, and ends with digital design technologies and the new emerging questions such as how biologically inspired computational processes alter the form of our architecture and the typical design process. Architecture originates from peoples’ needs and beliefs. The new forms of digital architecture generate debates in terms of various important issues, ranging from emotional and social factors to sustainability and warming climate. The focus area of the conference can be shaped, as follows: considering all these potentials, challenges, and arguments, which we have to benefit from and cope with, are there truly legitimate concerns about the future of our architecture and its content in particular from human and environmental dimensions? Can we develop our own ways of benefiting from the technology that cater to our environment and culture? Can we still see the form of architecture in the traditional way or should we change our perspectives? In other words the conference concentrates on bridging between the new digital form and the traditional human content.
series	ASCAAD
type	normal paper
email
last changed	2010/02/26 07:31

_id	ascaad2009_mai_abdelsalam
id	ascaad2009_mai_abdelsalam
authors	Abdelsalam, Mai
year	2009
title	The Use of the Smart Geometry through Various Design Processes: Using the programming platform (parametric features) and generative components
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 297-304
summary	The emergence of parametric generative design tools and prototyping manufacturing technology led to radical changes in architectural morphologies. This change increased the opportunity to develop innovative smart geometries. Integrating these algorithms in the parametric softwares led to variations in building design concepts increasing alternatives and decreasing the repetitive work previously needed in conventional CAD software. The chosen software in this research is Generative Components (GC). It is a software design tool for an associative and parametric design platform. It is tested for using Global Variables with associative functions during the concept creation and form GC comprises features. The results presented in this research may be considered an introduction to the smart geometry revolution. It deals with the generative design which applied in the design process from conceptual design phase, defining the problem, exploring design solutions, then how to develop the design phases. Office building is a building type which encourages new forms that needs computational processes to deal with repetitive functions and modular spaces and enclosed in a flexible creative structural skin. Generative design helps the office buildings to be arranged, analysed, and optimized using parameters in early stages in design process. By the end of the research, the use of the smart geometry in a high rise office building is defined and explained. The research is divided into three parts, first a summary of the basic theories of office buildings design and the sustainable requirements that affect it, and should be integrated. Secondly, the previous experiences in generating office buildings by Norman foster and Sergio Araya. At last, a case study is proposed to test and evaluate the use of the parametric generative methodology in designing an office building with specific emphasis on the function, environmental aspects and form generation using Generative Components (GC) Software.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	caadria2010_043
id	caadria2010_043
authors	Barker, Tom and M. Hank Haeusler
year	2010
title	Urban digital media: facilitating the intersection between science, the arts and culture in the arena of technology and building
doi	https://doi.org/10.52842/conf.caadria.2010.457
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 457-466
summary	The research presented in this paper investigates ways of providing better design applications for technologies in the field of Urban Digital Media (UDM). The work takes an emergent approach, evolving a design strategy through the early engagement of stakeholders. The paper discusses research in a design-led creative intersection between media technology, culture and the arts in the built environment. The case study discusses opportunities for the enhancement of a university campus experience, learning culture and community, through the provision of an integrated digital presence within campus architecture and urban spaces. It considers types of information architecture (Manovich, 2001) and designs for use in urban settings to create communication-rich, advanced and interactive designed spaces (Haeusler, 2009). The presented research investigates how to create a strategy for display technologies and networked communications to transform and augment the constructed reality of the built environment, allowing new formats of media activity.
keywords	Urban design; outdoor digital media; information architecture; multidisciplinary design; augmented reality; media facades
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2009_207
id	caadria2009_207
authors	Fasoulaki, Eleftheria E.
year	2009
title	Towards Integrated Design
doi	https://doi.org/10.52842/conf.caadria.2009.013
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 13-22
summary	This paper examines a different design approach called integrated. The term “integrated” has a dual utilization in this study. The first use refers to the integration of form and building performance. The second use refers to the integration of interrelated and diverse building performances involving multiple disciplines. The integrated design approach analyzes and evaluates several interrelated design systems involving different disciplines in the early design phase. The goal of the approach is the generation of design alternatives guided simultaneously by two basic objectives: the aspiration for form exploration and the satisfaction of the performances of interrelated systems.
keywords	Generative Algorithms: Building Performances; Multiple Building Disciplines; Optimization and Simulation Techniques; Coupled Building Systems
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	cf2009_037
id	cf2009_037
authors	Forgues, Daniel; Eugenie, Yoann
year	2009
title	Un « collaboratoire » comme nouveau contexte pour la transformation des pratiques via la technologie; A "collaboratory" as a new context for transforming practices through technology
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 37-50
summary	Building design is today a major social, economic and environmental challenge. Design is also a source of innovation and an important economic driving force that requires the collaboration of professionals from various fields of expertise. But the traditional linear approach in design has shown its limits, and it often leads to non optimal design solutions and buildings with inadequate performances. This paper aims to validate a computer supported collaborative workspace that facilitates the participation, in an integrated approach, of the various members of a construction project team. The goal of the research is to be part of the evolution of work practices in design.
keywords	Integrated design, collaborative workspace, task performance
series	CAAD Futures
type	normal paper
email
last changed	2009/06/09 07:11

_id	ascaad2009_samir_foura
id	ascaad2009_samir_foura
authors	Foura, Samir and Samira Debache
year	2009
title	Thermal Simulation In Residential Building Within Computer Aided Architectural Design: Integrated model
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 235-243
summary	Nowadays, the architectural profession is seeking a better energy saving in the design of buildings. The fear of energy shortage in the very near future, together with the rapid rise in energy prices, put pressure on researchers on this field to develop buildings with more efficient heating systems and energy systems. This work is concerned mainly with the development of a software program analyzing comfort in buildings integrated in CAD architectural systems. The problem of presenting the computer with information concerning the building itself has been overcome through integration of thermal analysis with the building capabilities of CAD system. Mainly, such experience concerns the rules for calculating heat loss and heat gain of buildings in Algeria, The program has been developed in order to demonstrate the importance of the innovation of the computer aided-architectural-design field (CAAD) in the technology of buildings such as the three dimensional modeling offering environmental thermal analysis. CAAD is an integrated architectural design system which can be used to carry out many tasks such as working drawings, perspectives and thermal studies, etc., all from the same data. Results are obtained in tabular form or in graphical output on the visual display. The principle of this program is that all input data should be readily available to the designer at the early stages of the design before the user starts to run the integrated model. Particular attention is given to the analysis of thermal aspects including solar radiation gains. Average monthly energy requirement predictions have been estimated depending on the building design aspect. So, this integrated model (CAAD and simulation comfort) is supposed to help architects to decide on the best options for improving the design of buildings. Some of these options may be included at the early design stages analysis. Indications may also be given on how to improve the design. The model stored on CAAD system provides a valuable data base for all sort analytical programs to be integrated into the system. The amount of time and expertise required to use complex analytical methods in architectural practice can be successfully overcome by integration with CAAD system.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	sigradi2009_676
id	sigradi2009_676
authors	Garcia Alvarado, Rodrigo
year	2009
title	Modelos Constructivos por Fabricación Digital [Constructive Models by Digital Fabrication]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	Digital manufacturing allows to elaborate constructive models to study material conditions and industrialization of building designs. This paper exposes strategies to develop models based on structural sections of 3D volumes, cutting profiles in BIM software, flexible manufacturing of building types and development of constructive systems. These procedures demonstrate combination of design and manufacturing technologies that encourages integrated building and new architectural possibilities.
keywords	Digital Manufacturing; Building Industrialization; 3D-modeling; CAD/CAM; BIM
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ecaade2009_037
id	ecaade2009_037
authors	Hermund, Anders
year	2009
title	Building Information Modeling in the Architectural Design Phases: And why Compulsory BIM can Provoke Distress among Architects
doi	https://doi.org/10.52842/conf.ecaade.2009.075
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 75-82
summary	The overall economical benefits of Building Information Modeling are generally comprehensible, but are there other problems with the implementation of BIM as a formulized system in a field that ultimately is dependent on a creative input? Is optimization and economic benefit really contributing with an architectural quality? In Denmark the implementation of the digital working methods related to BIM has been introduced by government law in 2007. Will the important role of the architect as designer change in accordance with these new methods, and does the idea of one big integrated model represent a paradox in relation to designing? The BIM mindset requires changes on many levels.
wos	WOS:000334282200008
keywords	BIM, Building Information Modeling, architectural technology, design approaches, mindset
series	eCAADe
email
last changed	2022/06/07 07:49

_id	cf2011_p108
id	cf2011_p108
authors	Iordanova, Ivanka; Forgues Daniel, Chiocchio François
year	2011
title	Creation of an Evolutive Conceptual Know-how Framework for Integrative Building Design
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 435-450.
summary	Low productivity of the building sector today is attributed to the fragmentation of tasks, disciplines and responsibilities, as well as to the resistance to adopt integrative work processes and digital means. The increased complexity of architectural projects and the aroused social consciousness for sustainable environment calls for integrative design collaboration. Thus, there is need for a Conceptual Framework combining work processes, technological means and policy aspects. According to the literature, integrative multidisciplinary design is a strategy resulting in high performance buildings nurturing sustainable way of living (Reed et al. 2009, Krygiel & Nies 2008). Responding to the increased technological complexity of our built environment, as well as to the objective of meeting multiple criteria of quality, both necessitating multidisciplinary collaboration during design, Building Information Modeling (BIM) is seen as a powerful means for fostering quality, augmenting productivity and decreasing loss in construction. Based on recent research, we can propose that a sustainable building can be designed through an integrative design process (IDP) which is best supported by BIM. However, our ongoing research program and consultations with advanced practitioners underscore a number of limitations. For example, a large portion of the interviewed professionals and construction stakeholders do not necessarily see a link between sustainable building, integrative design process and BIM, while in our opinion, their joint use augments the power of each of these approaches taken separately. Thus, there is an urgent necessity for the definition of an IDP-BIM framework, which could guide the building industry to sustainable results and better productivity. This paper defines such a framework, whose theoretical background lays on studies in social learning (activity theory and situated action theories). These theories suggest that learning and knowledge generation occurs mainly within a social process defined as an activity. This corresponds to the context in which the IDP-BIM framework will be used, its final objective being the transformation of building design practices. The proposed IDP-BIM framework is based on previous research and developments. Thus, firstly, IDP process was well formalized in the Roadmap for the Integrated Design Process‚ (Reed et al.) which is widely used as a guideline for collaborative integrative design by innovating practices in USA and Canada. Secondly, the National Building Information Modeling Standard (NBIMS) of the USA is putting an enormous effort in creating a BIM standard, Succar (2008) recently proposed a conceptual framework for BIM, but BIM ontology is still under development (Gursel et al 2009). Thirdly, an iterative design process bound to gating reviews (inspired from software development processes) was found to be successful in the context of multidisciplinary design studios (reported in our previous papers). The feedback from this study allowed for modifications and adjustments included in the present proposal. The gating process assures the good quality of the project and its compliance to the client's requirements. The challenge of this research is to map the above mentioned approaches, processes and technologies into the design process, thus creating an integrated framework supporting and nurturing sustainable design. The IDP-BIM framework can be represented by a multidimensional matrix linked to a semantic network knowledge database: - the axes of the matrix being the project timeline, the design process actors and building stakeholders (architect, engineers, client, contractor, environmental biologist, etc.), or different aspects of building performance (environmental, functional, social, interior environment quality, cost, etc.); and - the knowledge database providing multiple layers of semantic support in terms of process, domain knowledge, technology and workflow at a given moment of the project and for a given actor or building aspect. The IDP-BIM framework is created as an evolutive digital environment for know-how and will have an established protocol for regular updates. The paper will firstly present the state of the art in IDP and BIM. Secondly, it will expose the methodology used for the definition of the Framework, followed by a description of its structure, contents and digital implementation. Then, some scenarios for the use of the Framework will be shown as validation.
keywords	integrated design process, BIM, multidisciplinary design, conceptual framework
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2009_669
id	sigradi2009_669
authors	Jacobi, Martina Maldaner; Jan Halatsch; Antje Kunze; Gerhard Schmitt; Benamy Turkienicz
year	2009
title	A grammar-based system for the participatory design of urban structures [A grammar-based system for the participatory design of urban structures ]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	We propose a three-step participatory design cycle for the early urban design phase that can be integrated into the digital design chain. Step one involves a visualization method that is implemented as an interactive card-based interview technique for the collaborative requirement specification of urban designs. In step two these specifications are a) translated into simplified GIS data and then b) implemented into a grammar-based system together with the corresponding design regulations. The final outcome is a generative and iterative urban model, which includes buildings, building blocks, transportation networks and open spaces that visually communicates spatial impacts of urban design proposals.
keywords	City modeling; participatory design; shape grammars; urban planning
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	ijac20097301
id	ijac20097301
authors	Kolarevic, Branko
year	2009
title	Towards Integrative Design
source	International Journal of Architectural Computing vol. 7 - no. 3, 335-344
summary	For many, integration within the building industry is seen as a likely outcome as architecture, engineering, and construction fully engage the digital technologies in the design, analysis, and production of buildings. Concepts such as integrated design, integrated practice and integrated project delivery (IPD) have gained prominence in architecture over the past several years as relatively new paradigms.What is usually meant by these terms is a multidisciplinary, collaborative approach to design in which various participants from the building industry – architects, engineers, contractors, fabricators, etc. – participate jointly from the earliest stages of design, fluidly crossing the conventional disciplinary and professional boundaries to deliver an innovative product at the end.
series	journal
last changed	2009/10/20 08:02

_id	ecaade2009_101
id	ecaade2009_101
authors	Krijnen, Thomas; Beetz, Jakob; de Vries, Bauke
year	2009
title	Airport Schiphol: Behavioral Simulation of a Design Concept
doi	https://doi.org/10.52842/conf.ecaade.2009.559
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 559-564
summary	In this paper, we introduce an agent-based simulation of passengers in airport terminal buildings. A case study is described during which a prototype simulation tool is used to test the impact of a conceptual design change in an existing airport terminal building. We illustrate how this real-time, geometry-aware simulation can be generalized and integrated into the design process to support designers in configuring the spatial layout of public and functional buildings.
wos	WOS:000334282200067
keywords	User behavior, agent-based simulation, airport terminal, design process, design evaluation
series	eCAADe
email
last changed	2022/06/07 07:51

_id	cf2009_poster_13
id	cf2009_poster_13
authors	Mueller, Volker
year	2009
title	Concept design tool requirements: Developing a Framework for Concept Design Tool Specifications
source	T. Tidafi and T. Dorta (eds) Joining Languages Cultures and Visions: CAADFutures 2009 CD-Rom
summary	Early design phases generate high project value with relatively little effort. However, digital tools supporting integrated concept design at a high knowledge level are scarce. Research has focused on specific aspects of design tools yielding focused and disjoint insights. An actionable requirements framework will allow assembly of research results into a meaningful, comprehensive concept design tool set and will reveal gaps which will help identify further research opportunities.
keywords	Concept design, digital tools, affordance, building performance
series	CAAD Futures
type	poster
email
last changed	2009/07/08 22:12

_id	acadia09_186
id	acadia09_186
authors	Rappaport, Nina
year	2009
title	Real Time / Implication for Production Spaces
doi	https://doi.org/10.52842/conf.acadia.2009.186
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 186-193
summary	Systems of feedback loops and cybernetic methods have influenced for decades the production and consumption networks and supply and demand chains in computer-integrated manufacturing. These mechanisms contribute to the increased efficiency of production, expanding the ability of both manufacturers and production engineers to create a workplace with smoother supply-chain management, as well as economies of scale and scope that are contingent on increased capitalism in a networked, globalized world. Mobility and flexibility are both physical and philosophical imperatives, aided by new small-scaled controls such as handheld wireless devices, which also contribute to a rising culture of nomadism. The shrinking scale of technologies and facilities has provided the mobile worker with numerous opportunities within complexly networked systems, forming a new paradigm for urban production spaces of the future. This paper is an investigation of how technology is changing and reshaping the architectural potentials for the contemporary industrial workplace.
keywords	Industry, technology, history, critique, automation
series	ACADIA
type	Normal paper
email
last changed	2022/06/07 08:00

_id	ascaad2009_bhzad_sidawi
id	ascaad2009_bhzad_sidawi
authors	Sidawi, Bhzad
year	2009
title	The Consideration of Lifelong Owner’s and Property’s Characteristics in Nd Cad System: The case of affordable housing in kingdom of Saudi Arabia
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 191-204
summary	Residential property value is affected by several factors during its useful time. . These factors include people’s lifestyles, traditions and culture, and the way they live and interact with the built environment. The property characteristics such as its location, building quality, adaptability, and energy efficiency would also have an impact on the property value. On the other hand, the nD CAD research that emerged in the late 1990s proposed endless dimensions of CAD modelling that would incorporate the building regulations’ requirements, basic user needs and client requirements. However, there is a need to implement lifelong parameters that would have significant effect on the property value in 3D models during the early stages of design. This can be done through a knowledge base integrated into a 3D model and links the lifelong property’s and the user’s characteristics with the property’s value. A survey was carried out on banks and Real Estate Development Fund (REDF) in the Kingdom of Saudi Arabia to find out the level of impact of lifelong users and property characteristics on the property’s value. The results of the survey showed a number of lifelong property and user driven parameters that may have major impact on the property’s value. The implementation of lifelong parameters in nD CAD models would have a number of benefits. It would provide the decision makers such as banks and investors with a tool to assess the level of impact of possible lifelong factors on the property value and consider alternative schemes. Designers would use it during the early stages of design to produce optimum design solutions that provide an adequate product that is evaluated regarding its lifelong value to the end users. Eventually it would provide a comfortable environment that is tailored to the user’s needs and aspirations, while reserving the property’s lifelong value.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	cf2009_673
id	cf2009_673
authors	Tamke, Martin; Thomsen, Mette, Ramsgard
year	2009
title	Digital wood craft
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 673- 686
summary	In 1995, Robin Evans points out in his book The Projective Cast how the development of techniques changed architecture and the space inhabited in times of Gothic and early Renaissance. We see a parallel phenomenon today, where the interplay of technology and tool gives shape to new design (Kolarevic 2005). Yet in opposition to the interwoven fields of design and craft of the late Gothic, today’s building sector is enormously diversified, and a growing complexity in the building process and number of used materials can be observed. This gives an opposite point of departure into a more integrated field of design and innovation in architectural design and building industry.
keywords	Digital production, CAD/CAM, parametric design, complex form, mass customization
series	CAAD Futures
email
last changed	2009/06/08 20:53

For more results click below: