Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 593

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2009_samir_foura
id	ascaad2009_samir_foura
authors	Foura, Samir and Samira Debache
year	2009
title	Thermal Simulation In Residential Building Within Computer Aided Architectural Design: Integrated model
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 235-243
summary	Nowadays, the architectural profession is seeking a better energy saving in the design of buildings. The fear of energy shortage in the very near future, together with the rapid rise in energy prices, put pressure on researchers on this field to develop buildings with more efficient heating systems and energy systems. This work is concerned mainly with the development of a software program analyzing comfort in buildings integrated in CAD architectural systems. The problem of presenting the computer with information concerning the building itself has been overcome through integration of thermal analysis with the building capabilities of CAD system. Mainly, such experience concerns the rules for calculating heat loss and heat gain of buildings in Algeria, The program has been developed in order to demonstrate the importance of the innovation of the computer aided-architectural-design field (CAAD) in the technology of buildings such as the three dimensional modeling offering environmental thermal analysis. CAAD is an integrated architectural design system which can be used to carry out many tasks such as working drawings, perspectives and thermal studies, etc., all from the same data. Results are obtained in tabular form or in graphical output on the visual display. The principle of this program is that all input data should be readily available to the designer at the early stages of the design before the user starts to run the integrated model. Particular attention is given to the analysis of thermal aspects including solar radiation gains. Average monthly energy requirement predictions have been estimated depending on the building design aspect. So, this integrated model (CAAD and simulation comfort) is supposed to help architects to decide on the best options for improving the design of buildings. Some of these options may be included at the early design stages analysis. Indications may also be given on how to improve the design. The model stored on CAAD system provides a valuable data base for all sort analytical programs to be integrated into the system. The amount of time and expertise required to use complex analytical methods in architectural practice can be successfully overcome by integration with CAAD system.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	sigradi2015_8.334
id	sigradi2015_8.334
authors	Silva, Lilian Maciel Furtado; Silva, Neander Furtado
year	2015
title	Digital Design of High-Rise Buildings with Tessellation and Mapping
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 414-419.
summary	A new high-rise building, when inserted in an existing urban environment, cannot have all the floor plans identical since the visual and environmental constraints change from floor to floor due to the interference of neighboring buildings, sun light, prevailing wind and noise. So how can we design a building that takes into consideration all this variables? How can digital design tools help? (DELPINO, 2014). We believe that a building like that can be designed constructing facade maps which allow a floor by floor analysis considering visual, wind, noise and sun light constraints. We believe that facade maps analysis and their superposition provide clues of how each floor plan can be built to provide comfort and to take most advantage of the view. (DELPINO, 2014). We believe that variation techniques such as tessellation and morphing can provide the formal bases for such design. We believe that digital design tools are vital both for analysis as well as for designing this type of building. (IWAMOTO, 2009, p. 35-59; MOUSSAVI, 2009, p. 42-216).
keywords	High-rise Buildings, Digital Design Method, Tessellation, Mapping
series	SIGRADI
email
last changed	2016/03/10 10:00

_id	ecaade2009_052
id	ecaade2009_052
authors	Sarhan, Ahmed; Rutherford, Peter
year	2009
title	Embodied Game Agents in Environmental Design Education
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 795-802
doi	https://doi.org/10.52842/conf.ecaade.2009.795
wos	WOS:000334282200097
summary	Over time, design instructors have become more encouraged to accommodate the play metaphor in their courses, for its rich technical and psychological assets. While there are issues regarding the interactive narrative structure of the game, embodied Multi-Agent-Systems (MAS) have been introduced to address these issues and handle complicated game objectives. With the ever-growing complexity of design concepts and the mounting demand to design for sustainability, more variables and intricacies are introduced to the design and decision making process. This paper presents a proposed method that utilizes MAS in game engines to resolve the environment design complexity for design students and untrained professionals. This method offers better comprehension of the implication of data generated from building analysis tools, and presents guidelines to develop the proposed design accordingly.
keywords	Game Engines, environmental design education, embodied multi-agent system, interactive narrative
series	eCAADe
email
last changed	2022/06/07 07:57

_id	acadia20_574
id	acadia20_574
authors	Nguyen, John; Peters, Brady
year	2020
title	Computational Fluid Dynamics in Building Design Practice
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 574-583.
doi	https://doi.org/10.52842/conf.acadia.2020.1.574
summary	This paper provides a state-of-the-art of computational fluid dynamics (CFD) in the building industry. Two methods were used to find this new knowledge: a series of interviews with leading architecture, engineering, and software professionals; and a series of tests in which CFD software was evaluated using comparable criteria. The paper reports findings in technology, workflows, projects, current unmet needs, and future directions. In buildings, airflow is fundamental for heating and cooling, as well as occupant comfort and productivity. Despite its importance, the design of airflow systems is outside the realm of much of architectural design practice; but with advances in digital tools, it is now possible for architects to integrate air flow into their building design workflows (Peters and Peters 2018). As Chen (2009) states, “In order to regulate the indoor air parameters, it is essential to have suitable tools to predict ventilation performance in buildings.” By enabling scientific data to be conveyed in a visual process that provides useful analytical information to designers (Hartog and Koutamanis 2000), computer performance simulations have opened up new territories for design “by introducing environments in which we can manipulate and observe” (Kaijima et al. 2013). Beyond comfort and productivity, in recent months it has emerged that air flow may also be a matter of life and death. With the current global pandemic of SARS-CoV-2, it is indoor environments where infections most often happen (Qian et al. 2020). To design architecture in a post-COVID-19 environment will require an in-depth understanding of how air flows through space.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	acadia13_109
id	acadia13_109
authors	Thün, Geoffrey; Velikov, Kathy
year	2013
title	Adaptation as a Framework for Reconsidering High-Performance Residential Design: A Case Study
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 109-118
doi	https://doi.org/10.52842/conf.acadia.2013.109
summary	This paper outlines an approach to adaptive residential design explored through recent research and an executed prototype, the North House project (2007-2009), undertaken through an interdisciplinary collaboration of researchers and students from the University of Waterloo, Ryerson University and Simon Fraser University in concert with professional and industry partners. This project aimed to develop a framework for the delivery of adaptive detached residential buildings capable of net-zero energy performance in the temperate climate zone, or the near north. Within this project, the term “adaptive” is developed across several tracts of conceptualization and execution including site and climatically derived models for building material composition and envelope ratios, environmentally-responsive kinetic envelope components, intelligent HVAC controls and interactive interface design aimed at producing co-evolutionary behaviors between building systems and inhabitants. A provisional definition of adaptive architecture is outlined to address this range of considerations that calls into question the stable image of domestic architecture and its relationship to energy and contemporary assumptions regarding sustainable design. This paper also outlines computational approaches to design optimization, distributed building systems integration and the human-controls interfaces applicable to the home’s ecology of physical and information technologies.
keywords	next generation technology, responsive buildings, high performance envelopes, sensing and feedback, passive and active systems, energy modeling, user interface
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:58

_id	ecaade2009_110
id	ecaade2009_110
authors	van der Maas, David; Meagher, Mark; Abegg, Christian; Huang, Jeffrey
year	2009
title	Thermochromic Information Surfaces: Interactive Visualization for Architectural Environments
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 491-496
doi	https://doi.org/10.52842/conf.ecaade.2009.491
wos	WOS:000334282200059
summary	In this paper we describe a series of nine prototypes that were constructed to explore the benefits and limitations of thermochromic ink as a material for the design of architectural information surfaces. Among the goals of the project were the identification of inexpensive fabrication methods that could be used to build thermochromic surfaces at the scale of a room. Our primary design concerns were the ability to communicate information about indoor climate, and the integration of the information surfaces in an architectural environment. We propose a method for building thermochromic surfaces based on printed circuit boards (PCB) that is cost-effective, highly precise, and allows the fabrication of large surfaces through tiling.
keywords	Thermochromic display, interactive architecture, information visualization, fabrication process, communication
series	eCAADe
email
last changed	2022/06/07 07:58

_id	cf2009_poster_33
id	cf2009_poster_33
authors	Vanzer, Paul Martin
year	2009
title	Transformation of Housing in the ecology of desert climate: A Bioclimatic -Passive Solar Design vision of the Building integration with a dry environment
source	T. Tidafi and T. Dorta (eds) Joining Languages Cultures and Visions: CAADFutures 2009 CD-Rom
summary	This investigation arises from the need to include the systems of environmental natural conditioning and the architectural project in the ecology of the desert dry-climate. In this research, it is proposed to investigate the main features and techniques used in Southern Peru as an answer to build in a desert environment with high levels of sunlight and very few rain days. Identifying the historic processes of the vernacular architecture, in which we recognize evolved coherent forms, making possible to define the strategies with which to recreate architecture responsive to the ecology of the desert dry- climate.
keywords	Bioclimatic architecture, architecture in desert regions, solar architecture, sustainability, architecture and climate vernacular architecture
series	CAAD Futures
type	poster
last changed	2009/07/08 22:12

_id	acadia09_30
id	acadia09_30
authors	Aish, Robert
year	2009
title	Tools of Expression: Notation and Interaction for Design Computation
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 30-31
doi	https://doi.org/10.52842/conf.acadia.2009.030
summary	Design considers function, fabrication, and aesthetics collectively. Computation is beginning to affect the competitive dynamics of design. Using algorithms, designers are exploring forms that are essentially “undrawable,” even with advanced modeling and direct manipulation techniques. Determining the appropriate functional characteristics may require the application of increasingly complex structural- and environmental-performance analysis techniques. To realize physically a design may require further geometric analysis and rationalization, and the use of complex computer-controlled fabrication techniques.
keywords	Design, Computation, Form Finding, Design logic
series	ACADIA
type	Keynote paper
email
last changed	2022/06/07 07:54

_id	caadria2009_021
id	caadria2009_021
authors	Ambrose, Michael A.
year	2009
title	BIM and Comprehensive Design Studio Education
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 757-760
doi	https://doi.org/10.52842/conf.caadria.2009.757
summary	Building Information Modeling (BIM) has the potential to fundamentally alter the way composition, scale and abstraction are addressed in today’s comprehensive design studio by displacing the primacy of abstract conventions of representation with a methodology based on systems thinking and virtual simulation. BIM viewed as provocateur of design education provides great potential for the critical analysis of how architectural design is taught. The design studio project reflects new ways of teaching and addressing BIM methods and processes, and critically evaluating their effects and possibilities on architectural production.
keywords	Education; design theory; design studies; animation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ijac20097408
id	ijac20097408
authors	Biloria, Nimish; Valentina Sumini
year	2009
title	Performative Building Skin Systems: A Morphogenomic Approach Towards Developing Real-Time Adaptive Building Skin Systems
source	International Journal of Architectural Computing vol. 7 - no. 4, 643-676
summary	Morphogenomics, a relatively new research area, involves understanding the role played by information regulation in the emergence of diverse natural and artificially generated morphologies. Performative building skin systems as a bottom-up parametric formation of context aware interdependent, ubiquitously communicating components leading to the development of continually performative systems is one of the multi-scalar derivations of the aforementioned Morphogenomic understanding. The agenda of adaptations for these building skins specifically corresponds to three domains of adaptation: structural, behavioral and physiological adaptations resulting in kinetic adaptability, energy generation, conservation, transport and usage principles as well as material property based changes per component. The developed skins adapt in real time via operating upon ubiquitous communication and data-regulation protocols for sensing and processing contextual information. Computational processes and information technology based tools and techniques such as parametric design, real-time simulation using game design software, environmental information mapping, sensing and actuating systems coupled with inbuilt control systems as well as manufacturing physical models in collaboration with praxis form a vital part of these skin systems. These experiments and analysis based on developing intrinsic inter-dependencies between contextual data, structure and material logistics thus lay the foundation for a new era of continually performing, self powering, real-time adaptive intelligent building skin systems.
series	journal
last changed	2010/09/06 08:02

_id	cf2009_119
id	cf2009_119
authors	Boeykens, Stefan; Neuckermans, Herman
year	2009
title	Architectural design analysis, historical reconstruction and structured archival using 3D models: Techniques, methodology and long term preservation of digital models
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 119-132
summary	With the increased usage of 3D modeling, visualization, simulation and Building Information Modeling, architects produce 3D models, both for new designs and for historic reconstructions. However, these models are seldom shared to transfer structured information about the project. Even if they are exchanged, they are often not usable outside of their original design application. Additionally, digital archives with architectural content can not easily provide structured information about these 3D models, limiting their usefulness. This article discusses an approach to provide better structured models, using a combination of a sound methodology, the application of open file formats and additional metadata creation.
keywords	CAAD, design analysis, reconstruction, archival, preservation
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2009_152
id	ecaade2009_152
authors	de Godoi, Giovana; Celani, Gabriela
year	2009
title	Shape Grammars and Historical Town Renovations: A Case Study in Monte Alegre Do Sul
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 237-242
doi	https://doi.org/10.52842/conf.ecaade.2009.237
wos	WOS:000334282200029
summary	Shape grammars have been used in architecture for analysis and synthesis - in the first case, mainly for the characterization of styles and in the later for the generation of novel compositions. The present research proposes the use of shape grammars for establishing guidelines for the requalification of historical areas that have lost their original characteristics due to improper renovations. In order to develop and test the proposed method, a study was carried out in a small Brazilian town called Monte Alegre do Sul. The town was chosen because its original urban morphology, developed in the XIXth century, is still relatively well preserved, although part of the original façades have been transformed. The objective of the research is to develop a shape grammar to set guidelines for the requalification of the already renovated façades in Monte Alegre do Sul.
keywords	Façades, generative design systems, rule-based design, shape grammar
series	eCAADe
email
last changed	2022/06/07 07:55

_id	cf2009_458
id	cf2009_458
authors	Dillenburger, Benjamin; Braach, Markus and Hovestadt, Ludger
year	2009
title	Building design as individual compromise between qualities and costs: A general approach for automated building generation under permanent cost and quality control
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 458-471
summary	We introduce an evolutionary design approach for the automatic arrangement of a predefined space program on a given site. The design goal is to distribute floor spaces while ensuring the essential building performance and usage. The presented evolutionary strategy is applied to acquire optimal design solutions considering both environmental conditions and inner organization under diversified fitness functions. The evaluation process consists of the direct analysis of the spatial network and the physical factors in an adequate accuracy. The method provides a fast generation of qualified volumetric studies. The resulting buildings become a manifested compromise between qualities and cost.
keywords	Evolutionary strategy, multi-fitness criteria, dual graph representation, network analysis, building envelope
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	ecaade2022_367
id	ecaade2022_367
authors	Doumpioti, Christina and Huang, Jeffrey
year	2022
title	Field Condition - Environmental sensibility of spatial configurations with the use of machine intelligence
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 2, Ghent, 13-16 September 2022, pp. 67–74
doi	https://doi.org/10.52842/conf.ecaade.2022.2.067
summary	Within computational environmental design (CED), different Machine Learning (ML) models are gaining ground. They aim for time efficiency by automating simulation and speeding up environmental performance feedback. This study suggests an approach that enhances not the optimization but the generative aspect of environmentally driven ML processes in architectural design. We follow Stan Allen's (2009) idea of 'field conditions' as a bottom-up phenomenon according to which form and space emerge from local invisible and dynamic connections. By employing parametric modeling, environmental analysis data, and conditional Generative Adversarial Networks [cGAN] we introduce a generative approach in design that reverses the typical design process of going from formal interpretation to analysis and encourages the emergence of spatial configurations with embedded environmental intelligence. We call it Intensive-driven Environmental Design Computation [IEDC], and we employ it in a case study on a residential building typology encountered in the Mediterranean. The paper describes the process, emphasizing dataset preparation as the stage where the logic of field conditions is established. The proposed research differentiates from cGAN models that offer automatic environmental performance predictions to one that spatial predictions stem from dynamic fields.
keywords	Field Architecture, Environmental Design, Generative Design, Machine Learning, Residential Typologies
series	eCAADe
email
last changed	2024/04/22 07:10

_id	caadria2009_146
id	caadria2009_146
authors	Fagerström, Gustav
year	2009
title	Dynamic Relaxation of Tensegrity Structures
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 553-562
doi	https://doi.org/10.52842/conf.caadria.2009.553
summary	The structural hierarchy inherent to tensegrities enables a building skin that performs on multiple levels simultaneously. While having one function in the global building mechanics, its individual components can work as self-contained systems balancing tensile and compressive forces locally within them. The behavior of elements under load is linear and thus describable analytically. When these are aggregated in a tensegrity however, the performance of the assembly as a whole is non-linear. In order to investigate further these relationships a method of dynamic relaxation will be developed. This tool allows for simulation and load analysis of a complex tensegrous network, based on the relationships between force, stiffness and dimension formulated by Young and the computational means provided by a parametric/associative modeling environment. This research investigates the possible formfinding through computational means of a double-layer tensegrity grid.
keywords	Dynamic; relaxation; tensegrity; form finding
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaade2009_149
id	ecaade2009_149
authors	Ilal, Mustafa Emre
year	2009
title	The Building Performance Perspective for Interoperability: Requirements for a Future Analysis Network
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 89-94
doi	https://doi.org/10.52842/conf.ecaade.2009.089
wos	WOS:000334282200010
summary	There is an increasing demand for building performance assessment among architects mostly due to a rising awareness for issues related to environmental sustainability. However, after thirty years of research, interoperability of performance analysis tools with CAAD environments is still far from being seamless. Yet, all commercial CAAD vendors have recently started offering an array of building analysis tools. It is fair to expect a new surge of efforts in integrating prediction and evaluation capabilities within CAAD systems over the next few years. Building on lessons learned, this paper argues the need for a unification infrastructure for building performance and outlines the requirements for building an analysis network.
keywords	Building performance analysis, interoperability, BIM
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:49

_id	ijac20097301
id	ijac20097301
authors	Kolarevic, Branko
year	2009
title	Towards Integrative Design
source	International Journal of Architectural Computing vol. 7 - no. 3, 335-344
summary	For many, integration within the building industry is seen as a likely outcome as architecture, engineering, and construction fully engage the digital technologies in the design, analysis, and production of buildings. Concepts such as integrated design, integrated practice and integrated project delivery (IPD) have gained prominence in architecture over the past several years as relatively new paradigms.What is usually meant by these terms is a multidisciplinary, collaborative approach to design in which various participants from the building industry – architects, engineers, contractors, fabricators, etc. – participate jointly from the earliest stages of design, fluidly crossing the conventional disciplinary and professional boundaries to deliver an innovative product at the end.
series	journal
last changed	2009/10/20 08:02

_id	cf2009_501
id	cf2009_501
authors	Li, Yongzhi; Lertlakkhanakul, Jumphon; Lee, Seongki and Choi, Jinwon
year	2009
title	Design with space syntax analysis based on building information model: Towards an interactive application of building information model in early design process
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 501- 514
summary	This paper introduces a new framework to enable user-friendly space syntax analysis during the initial design stage. It assists designers, without in-depth knowledge on space syntax, to evaluate and compare design outcomes rapidly. The framework is realized by integration between space syntax and building information model in which space topology is autonomously retrieved. A BIM modeler so called ‘ArchiSpace’ has been developed to demonstrate the applicability of the framework to design practice. Our experiment shows that designers can use the modeler to analyze their design alternatives instantly at any moment during the initial design stage. Therefore, users can generate and evaluate their design alternatives simultaneously without distraction and tedious work on the space syntax analysis in detail.
keywords	Space syntax, building information modeling, evidence based design, space topology
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	sigradi2009_779
id	sigradi2009_779
authors	Lima, Thais Borges Sanches; Cláudia Naves David Amorim; Giselle Marie Cormier Chaim
year	2009
title	Simulação do Desempenho Energético de Edifícios de Escritórios em Brasília [Energy performance simulation of Brasília’s office buildings]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This paper presents a parametric analysis where WWR and color glass was varied to determine their influence in the thermal performance of an office building’s room. Design Builder tool was used to calculate the thermal load and the internal gains. The WWR variation in different orientations resulted in a significant increase of the thermal load. The reflective glass allowed a better thermal performance of the room. With the use of computer simulation was possible to analyse many constructive and design characteristics of the facade and its influence on the results, when considered together.
keywords	Energy performance; office buildings; computer simulation; Design Builder
series	SIGRADI
email
last changed	2016/03/10 09:55

For more results click below: