Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 567

Reformat results as: short short into frame detailed detailed into frame

_id	acadia09_252
id	acadia09_252
authors	Baker, William; Beghini, Alessandro; Carrion, Juan; Tort, Cenk
year	2009
title	Scripting for a New Architecture: Studies in Structural Optimization
doi	https://doi.org/10.52842/conf.acadia.2009.252
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 252-254
summary	This paper describes how scripting has been successfully used by structural engineers at Skidmore, Owings & Merrill, LLP (SOM) to rediscover, apply, and develop several tools for structural optimization. Some of these methods are described in this paper for applications to high-rise buildings and long-span roof structures
series	ACADIA
type	Short paper
email
last changed	2022/06/07 07:54

_id	cf2009_472
id	cf2009_472
authors	Ciblac, Thierry
year	2009
title	L’analyse dimensionnelle comme aide à l’optimisation en phase de conception architecturale: applications à des cas de structures; Dimensional analysis as support toward optimization in architectural conception phase: applications to structural cases
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 472- 486
summary	One of the research ways carried out in the ARIAM-LAREA laboratory aims at giving to architects computing tools for early evaluation of structures. A particular approach uses dimensional analysis and similitude properties in order to define parameter variation laws. Such laws are illustrated by analytical cases using the theory of strength of materials. For complex structures, a heuristic is proposed to give indications of parameter variation influence on mechanical behavior. Some applications are presented for early determination of structural size and limit values, using computations by finite element method.
keywords	Structure, design, dimensional analysis, similitude
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	ascaad2009_mai_abdelsalam
id	ascaad2009_mai_abdelsalam
authors	Abdelsalam, Mai
year	2009
title	The Use of the Smart Geometry through Various Design Processes: Using the programming platform (parametric features) and generative components
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 297-304
summary	The emergence of parametric generative design tools and prototyping manufacturing technology led to radical changes in architectural morphologies. This change increased the opportunity to develop innovative smart geometries. Integrating these algorithms in the parametric softwares led to variations in building design concepts increasing alternatives and decreasing the repetitive work previously needed in conventional CAD software. The chosen software in this research is Generative Components (GC). It is a software design tool for an associative and parametric design platform. It is tested for using Global Variables with associative functions during the concept creation and form GC comprises features. The results presented in this research may be considered an introduction to the smart geometry revolution. It deals with the generative design which applied in the design process from conceptual design phase, defining the problem, exploring design solutions, then how to develop the design phases. Office building is a building type which encourages new forms that needs computational processes to deal with repetitive functions and modular spaces and enclosed in a flexible creative structural skin. Generative design helps the office buildings to be arranged, analysed, and optimized using parameters in early stages in design process. By the end of the research, the use of the smart geometry in a high rise office building is defined and explained. The research is divided into three parts, first a summary of the basic theories of office buildings design and the sustainable requirements that affect it, and should be integrated. Secondly, the previous experiences in generating office buildings by Norman foster and Sergio Araya. At last, a case study is proposed to test and evaluate the use of the parametric generative methodology in designing an office building with specific emphasis on the function, environmental aspects and form generation using Generative Components (GC) Software.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	acadia09_30
id	acadia09_30
authors	Aish, Robert
year	2009
title	Tools of Expression: Notation and Interaction for Design Computation
doi	https://doi.org/10.52842/conf.acadia.2009.030
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 30-31
summary	Design considers function, fabrication, and aesthetics collectively. Computation is beginning to affect the competitive dynamics of design. Using algorithms, designers are exploring forms that are essentially “undrawable,” even with advanced modeling and direct manipulation techniques. Determining the appropriate functional characteristics may require the application of increasingly complex structural- and environmental-performance analysis techniques. To realize physically a design may require further geometric analysis and rationalization, and the use of complex computer-controlled fabrication techniques.
keywords	Design, Computation, Form Finding, Design logic
series	ACADIA
type	Keynote paper
email
last changed	2022/06/07 07:54

_id	ijac20097408
id	ijac20097408
authors	Biloria, Nimish; Valentina Sumini
year	2009
title	Performative Building Skin Systems: A Morphogenomic Approach Towards Developing Real-Time Adaptive Building Skin Systems
source	International Journal of Architectural Computing vol. 7 - no. 4, 643-676
summary	Morphogenomics, a relatively new research area, involves understanding the role played by information regulation in the emergence of diverse natural and artificially generated morphologies. Performative building skin systems as a bottom-up parametric formation of context aware interdependent, ubiquitously communicating components leading to the development of continually performative systems is one of the multi-scalar derivations of the aforementioned Morphogenomic understanding. The agenda of adaptations for these building skins specifically corresponds to three domains of adaptation: structural, behavioral and physiological adaptations resulting in kinetic adaptability, energy generation, conservation, transport and usage principles as well as material property based changes per component. The developed skins adapt in real time via operating upon ubiquitous communication and data-regulation protocols for sensing and processing contextual information. Computational processes and information technology based tools and techniques such as parametric design, real-time simulation using game design software, environmental information mapping, sensing and actuating systems coupled with inbuilt control systems as well as manufacturing physical models in collaboration with praxis form a vital part of these skin systems. These experiments and analysis based on developing intrinsic inter-dependencies between contextual data, structure and material logistics thus lay the foundation for a new era of continually performing, self powering, real-time adaptive intelligent building skin systems.
series	journal
last changed	2010/09/06 08:02

_id	ascaad2009_andrea_cammarata
id	ascaad2009_andrea_cammarata
authors	Cammarata, Andrea
year	2009
title	Rebuilding Architecture: An analysis and critical investigation practice
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 121-134
summary	The Cooperative Design Environment Laboratory (CoDE Lab) is carrying out a research with students, trainees and seniors who have previously participated to CAAD-assisted design courses. These courses were developed with the aim of making participants independent from the pre-analytical phase project to the renderings of the final artifact. The programs that have been used so far are Autodesk Revit, Graphisoft Archicad and Nemetschek Allplan.The teaching workgroup has always believed that analyzing, deconstructing and reconstructing the architecture teaches much in terms of understanding. If the process is done correctly, it entirely re-traces the creative dynamics developed by the original designer. Subsequently, the educational practice is to choose a notable architectural work, designed and/or created by a Master of architecture, and to reproduce it in all details: aesthetical-formal, morphological, technological, structural, modular, etc. The final result is an archive of well-developed reconstructed models of great specific interest. The students on the other hand thoroughly learn how to control the tools and all BIM planning procedures.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ascaad2009_danilo_di_mascio
id	ascaad2009_danilo_di_mascio
authors	Di Mascio, Danilo
year	2009
title	Digital Reconstruction and Analysis of Turchinio’s Trabocco: A method of digital reconstruction of a complex structure as a way to improve our knowledge of a cultural heritage artifact
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 177-189
summary	The aim of the following paper is to show a method of digital reconstruction and analysis of an important artifact pertaining to the Abruzzo cultural heritage, the ‘trabocco’. In fact recent software for graphics and architecture, such as CAD, graphics editor, and those dedicated to three-dimensional modeling and rendering are tools that open new opportunities in the study of cultural heritage artifacts, The more the complexity of the object to study, the more the advantages for their use. A formal and structural complexity characterize the trabocchi, pile constructions typical of the Abruzzo coast, that go back to the middle of XVII century and the subject of this study is the trabocco of Punta Turchinio, the most famous and complex of the coast. Among the digital reconstruction’s objectives there are: Increase the knowledge of the ‘trabocco’ and generate a series of information necessary to define and manage a recovery plan; to study more deeply the technologic decomposition of the four main sub-systems with related abacus of the technological elements and create static and animated graphics restitutions such as renderings and animations to understand some spatial and formal characteristics.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ecaade2009_129
id	ecaade2009_129
authors	Hemmerling, Marco
year	2009
title	Twister: An Integral Approach towards Digital Design and Construction
doi	https://doi.org/10.52842/conf.ecaade.2009.299
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 299-304
summary	The paper outlines the relevance of computational geometry within the design and production process of architecture. Based on the case study “Twister”, the digital chain - from the initial form-finding to the final realization of spatial concepts - is discussed in relation to geometric principles. The association with the fascinating complexity, which can be found in nature and its underlying geometry was the starting point for the project presented in the paper. The translation of geometric principles into a three-dimensional digital design model was followed by a process of transformation and optimization of the initial shape, that integrated aesthetic, spatial and structural qualities as well as aspects of material properties and conditions of production.
wos	WOS:000334282200036
keywords	Geometry, 3D modeling, rapid prototyping, photogrammetry, digital fabrication
series	eCAADe
email
last changed	2022/06/07 07:49

_id	acadia09_144
id	acadia09_144
authors	Miller, Nathan
year	2009
title	Parametric Strategies in Civic Architecture Design
doi	https://doi.org/10.52842/conf.acadia.2009.144
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 144-152
summary	Using several NBBJ civic projects as case studies, this paper provides an overview of how NBBJ’s Los Angeles design studio is leveraging parametric and generative processes for the design of projects such as stadiums and exposition halls. A combination of ambitious intent and fast project schedules necessitates the use of advanced parametric tools to quickly solve complex problems, generate unique features, and automate parts of the design process. Designers will utilize digital tools for a variety of purposes, which can be classified under two general categories. The first and most common application of the technology is within the category of rationalization and optimization. The tool, in this case, is limited to the role of a production device that aids the designer in efficiently solving complex design problems. In more unique projects, the advanced technology acts as a generative tool and is an integral part of a working design methodology. In this case, the design technology becomes more than just a tool at the designer’s disposal. Rather, it has the potential to act as a critical lens for identifying new possibilities in the architecture.
keywords	Parametric design, complexity, stadium, scripting
series	ACADIA
type	Normal paper
email
last changed	2022/06/07 07:58

_id	ecaade2009_039
id	ecaade2009_039
authors	Papapavlou, Aikaterini; Turner, Alasdair
year	2009
title	Structural Evolution: A Genetic Algorithm Method to Generate Structurally Optimal Delaunay Triangulated Space Frames for Dynamic Loads
doi	https://doi.org/10.52842/conf.ecaade.2009.173
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 173-180
summary	This paper presents an evolutionary algorithm that draws its power from the literal interpretation of the natural system’s reproductive process at a microscopic scale with the scope of generating optimal Delaunay triangulated space frames for dynamic loads. The algorithm repositions a firm number of nodes within a space envelope, by establishing Delaunay tetrahedra and, consequently, creating adaptable optimised space frame topologies. The arbitrarily generated tetrahedralised structure is compared against a canonical designed one and the results of this comparison indicate that the method proposed has advantageous properties and is capable of generating an optimum structure that exceeds statically the performance of an engineered tetrahedralised space frame.
wos	WOS:000334282200021
keywords	Genetic Algorithms, optimization, delaunay triangulation, space frame
series	eCAADe
email
last changed	2022/06/07 08:00

_id	ascaad2010_075
id	ascaad2010_075
authors	Schubert, Gerhard; Kaufmann Stefan and Petzold Frank
year	2010
title	Project Wave 0.18
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 75-88
summary	In recent years a number of projects have been emerged, in which the new possibilities of the computer as a design tool, have been used. Through the digital chain from design to manufacturing the efficiency has increased and allows the implementation of complex architectural structures. With all these new opportunities, also new challenges arise in the teaching and the educational concepts. The paper describes the detailed course concept and the didactic strategy using the example of a parametric designed roof structure, we designed, planed and build up in scale 1:1 within the main course. „Wendepunkt\|e im Bauen“ (Turning point\|s of building) is the name of an exhibition at the “Pinakothek der Moderne” in Spring 2010. In addition to contributions of the industrialization in the building industry from 1850 to the present day, the exhibition also serves as a platform, to demonstrate new possibilities of computer-aided parametric design and the closely related computer aided manufacturing (CAM). In this context, we took the chance to build a sculpture in Scale 1:1 to show the potential of a constant digital workflow and the digital fabrication. Through the digital chain from design to manufacturing, the efficiency has been increased by the computer and allows the implementation of new complex architectural structures. But the efficiency of the high-degree-automation through the use of computerized machines usually ends in the production of the components. Because this coincidence of the elements in the assembly often proves cost and time, the aim of the project was to optimize both, the production of components and their assembly as well. As part of the wintercourse 2009/2010 different aspects of automation have been reviewed and new solutions have been analyzed. Together with 15 students of the Faculty of Architecture the complete digital chain started with the first design ideas, about parametric programming through production and assembly had been researched, implemented and brought to reality. In the first steps, the students had to learn about the potential, but also about the problems coming with the digital-design and the attached digital-production. There for the course took part at our computerlab. In weekly workshops, all ideas have been implemented and tested directly in the 3-dimensional parametric model. And thanks to the interdisciplinary work with the Department of Structural Design also static factors had been considered, to optimize the form. Parallel to the digital form-finding process, the first prototypes have been produced by the students. By using the chairs 3D-CNC-Mills we were able to check the programmed connection detail in reality and apply the so learned lessons to the further development. After nearly 3 month of research, designing, planning and programming, we were able to produce the over 1000 different parts in only 4 days. By developing a special pre-stressed structure and connection detail it was also possible, to assemble the whole structure (13.5m x 4.5m x 4m) in only one day. The close connection between digital design (CAD) and digital manufacturing (CAM) is an important point of our doctrine. By the fact, that the students operate the machines themselves, but also implement projects on a scale of 1:1, they learn to independently evaluate these new tools and to use them in a meaningful way.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	cf2011_p060
id	cf2011_p060
authors	Sheward, Hugo; Eastman Charles
year	2011
title	Preliminary Concept Design (PCD) Tools for Laboratory Buildings, Automated Design Optimization and Assessment Embedded in Building Information Modeling (BIM) Tools.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 451-476.
summary	The design of laboratory buildings entails the implementation of a variety of design constraints such as building codes; design guidelines and technical requirements. The application of these requires from designers the derivation of data not explicitly available at early stages of design, at the same time there is no precise methodology to control the consistency, and accuracy of their application. Many of these constraints deal with providing secure environmental conditions for the activities inside laboratories and their repercussions both for the building occupants and population in general, these constraints mandate a strict control over the building‚Äôs Mechanical Equipment (MEP), in particular the Heating Ventilating and Air Conditioning (HVAC) system. Due to the importance of these laboratory designers are expected to assess their designs not only according spatial relationships, but also design variables such as HVAC efficiency, air pressure hierarchies, operational costs, and the possible implications of their design decisions in the biological safety of the facility. At this point in time, there are no practical methods for making these assessments, without having constant interaction with HVAC specialists. The assessment of laboratory design variables, particularly those technical in nature, such as dimensioning of ducts or energy consumption are usually performed at late stages of design. They are performed by domain experts using data manually extracted from design information, with the addition of domain specific knowledge, the evaluation is done mostly through manual calculations or building simulations. In traditional practices most expert evaluations are performed once the architectural design have been completed, the turn around of the evaluation might take hours or days depending on the methods used by the engineer, therefore reducing the possibility for design alternatives evaluation. The results of these evaluations will give clues about sizing of the HVAC equipment, and might generate the need for design reformulations, causing higher development costs and time delays. Several efforts in the development of computational tools for automated design evaluation such as wheel chair accessibility (Han, Law, Latombe, Kunz, 2002) security and circulation (Eastman, 2009), and construction codes (ww.Corenet.gov.sg) have demonstrated the capabilities of rule or parameter based building assessment; several computer applications capable of supporting HVAC engineers in system designing for late concept or design development exist, but little has been done to assess the capabilities of computer applications to support laboratory design during architectural Preliminary Concept Design(PCD) (Trcka, Hensen, 2010). Developments in CAD technologies such as Building Information Modeling (BIM) have opened doors to formal explorations in generative design using rule based or parametric modeling [7]. BIM represents buildings as a collection of objects with their own geometry, attributes, and relations. BIM also allows for the definition of objects parametrically including their relation to other model objects. BIM has enabled the development of automated rule based building evaluation (Eastman, 2009). Most of contemporary BIM applications contemplate in their default user interfaces access to design constraints and object attribute manipulations. Some even allow for the application of rules over these. Such capabilities make BIM viable platforms for automation of design data derivation and for the implementation of generative based design assessment. In this paper we analyze the possibilities provided by contemporary BIM for implementing generative based design assessment in laboratory buildings. In this schema, domain specific knowledge is embedded in to the BIM system as to make explicit design metrics that can help designers and engineers to assess the performance of design alternatives. The implementation of generative design assessments during PCD can help designers and engineers to identify design issues early in the process, reducing the number of revisions and reconfigurations in later stages of design. And generally improving design performance.
keywords	Heating ventilating and Air Conditioning (HVAC), Building Information Models (BIM), Generative Design Assessment
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2009_911
id	sigradi2009_911
authors	Teixeira, Fábio Gonçalves; Sérgio Leandro dos Santos
year	2009
title	VirtusCADE, um Sistema para o Design Virtual de Produtos [VirtusCADE, A system for virtual design of products]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	The knowledge of latest technology that allows the development of competitive products in reduced times is crucial to guarantee a sustainable growth of the national industry. This work presents the development of a computational system for the Virtual Design of products, the VirtusCADE, which is a CAD/CAE interactive software (Computer Aided Design/Computer Aided Engineering). The VirtusCADE includes 3D geometric modeling of surfaces and solids and mesh generation. The system uses the parametric modeling of surfaces, including algorithms for determination of intersection between surfaces and for triangular mesh generation in trimmed parametric surfaces. The graphical interface is interactive and allows the direct real time manipulation of objects (lines, surfaces and solids) in 3D using the OpenGL technology. The system prioritizes the usability, implementing several graphic tools that facilitate the manipulation in 3D. The VirtusCADE contemplates the structural simulation through the Finite Element Method. The code architecture is based on oriented object programming, which allows great scaling capability for the implementation of new tools. This project has great applicability in numerical simulation of physical phenomena, such structural analysis of buildings, vehicles parts, with impact in the industries of civil construction, metal-mechanics, aerospatial, naval and automotive.
keywords	Virtual Design; Geometric modeling; Finite elements
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	cf2009_410
id	cf2009_410
authors	Abdelhameed, Wael
year	2009
title	Reciprocal relationship of conceptualization and design problem definition: A proposed approach for an architectural design studio
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 410-422
summary	This research paper proposes an approach to be applied in the design studio. The proposed approach highlights the reciprocal relationship between concept articulation and design problem definition in a design method that exposes different design activities related to this relationship. The design method was applied in a design studio of an intermediate level. The study reports the analysis of student designs in terms of the deign method employed. Moreover, a survey was carried out in order to measure the responses of students and instructors regarding the design method and its approach. The main structure of the design method proposed can be described as follows: although the relationship of concept articulation and design-problem definition are reciprocal, the influence of one direction can be distinguished more than of the other direction on different design activities. The research using qualitative and quantitative methodologies analyzes the results and outputs of the theoretical investigations, the practical application in the design studio, and the questionnaire responses through different methodological tools.
keywords	Conceptual design, design method, architectural design studio
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	ascaad2009_wael_abdelhameed
id	ascaad2009_wael_abdelhameed
authors	Abdelhameed, Wael
year	2009
title	Assessment of a Physical Planning Project through Virtual Reality: A case study
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 365-378
summary	The study reports an application of VR models in the assessment of a part of physical planning project. The project outputs were different reports, GIS data and maps, and CAD drawings. The GIS data were used to create the VR models by importing Shpfiles of the GIS project outputs to VR software. The study presents VR models and the assessment of the physical planning project in terms of: 1) effect of the population increase, 2) effect of the required residential units, and 3) quality assurance for the current situation and future situation. The method used to build up the VR Models was through satellite images (by Google Earth Pro) and VR software (by UC Win/Road). Different models were built up to visualize and assess the alternative solutions and various influential factors. The study employed Virtual Reality in various urban and planning problems through models that are employed as tools of communication and design. The visualized environment and the associated models facilitated the evaluation of important areas, namely: impact of different factors and alternative solutions. The study concludes that the processes, such as decision making, visualization and representation, performed through VR manifest its importance to different design phases of urban and physical planning.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ascaad2014_023
id	ascaad2014_023
authors	Al-Maiyah, Sura and Hisham Elkadi
year	2014
title	Assessing the Use of Advanced Daylight Simulation Modelling Tools in Enhancing the Student Learning Experience
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 303-313
summary	In architecture schools, where the ‘studio culture’ lies at the heart of students’ learning, taught courses, particularly technology ones, are often seen as secondary or supplementary units. Successful delivery of such courses, where students can act effectively, be motivated and engaged, is a rather demanding task requiring careful planning and the use of various teaching styles. A recent challenge that faces architecture education today, and subsequently influences the way technology courses are being designed, is the growing trend in practice towards environmentally responsive design and the need for graduates with new skills in sustainable construction and urban ecology (HEFCE’s consultation document, 2005). This article presents the role of innovative simulation modelling tools in the enhancement of the student learning experience and professional development. Reference is made to a teaching practice that has recently been applied at Portsmouth School of Architecture in the United Kingdom and piloted at Deakin University in Australia. The work focuses on the structure and delivery of one of the two main technology units in the second year architecture programme that underwent two main phases of revision during the academic years 2009/10 and 2010/11. The article examines the inclusion of advanced daylight simulation modelling tools in the unit programme, and measures the effectiveness of enhancing its delivery as a key component of the curriculum on the student learning experience. A main objective of the work was to explain whether or not the introduction of a simulation modelling component, and the later improvement of its integration with the course programme and assessment, has contributed to a better learning experience and level of engagement. Student feedback and the grade distribution pattern over the last three academic years were collected and analyzed. The analysis of student feedback on the revised modelling component showed a positive influence on the learning experience and level of satisfaction and engagement. An improvement in student performance was also recorded over the last two academic years and following the implementation of new assessment design.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	sigradi2009_693
id	sigradi2009_693
authors	Alves, Gilfranco Medeiros
year	2009
title	O desenho analógico e o desenho digital: a representação do projeto arquitetônico influenciado pelo uso do computador e as possíveis mudanças no proceso projetivo em arquitetura [Analogical design and digital design in architectural projects]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	The use of specific computer softwares for architecture design have been analyzed and allowed researchers in this matter to consider a change in architectural creation method realizing new possibilities in the way they project. Based on our experience as architectural project teacher we can observe that more and more students project and present projects with their drawings produced by computer. This tools changing envolves other changings in the project manners as we can notice in some architects that dawn in contemporary scene. This study wants to understand this changings in the projecting practice of Architecture and Urbanism students, and architects.
keywords	Design; Architectural Project; Digital Environment
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ascaad2009_michael_ambrose
id	ascaad2009_michael_ambrose
authors	Ambrose, Michael A.
year	2009
title	Spatial and Temporal Sequence: Film, animation and design theory - toward a constructed morphology
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 165-176
summary	This paper presents an investigation of film, space, form and motion to expose issues of spatial perception. The objective is to use a brief moment of constructed moving imagery (a film scene) as the vehicle to develop a spatial/temporal sequence. The design research focuses on an examination of the procedure or process constructed by the director/cinematographer. The changing position of the camera continually changes the relationship of the frame to the viewed context. The project asks the student to interpret the spatial and temporal transformation, through the continual oscillation between foreground and background, in an effort to unravel the pretext of the singular point of view to reveal the intention of the filmmaker. The project discussed here focuses on a relationship between the projection of space in architectural representation and the production of space through complex geometries relative to temporal discontinuities and the way in which they agitate and alter one another. Drawing topological relationships between of the paths, or trajectories of movement, within a proposed scene of a film is the vehicle for investigation in this project. An event or configuration complete in itself, but forming part of the larger collection, is modelled and transformed to suggest various structural and temporal definitions with respect to spatial portrayal through the composition of time and the cinematic frame. In particular, spatial animation of a sequence of framed condition was to be explored in the development of a spatial episode.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	sigradi2009_957
id	sigradi2009_957
authors	Baerlecken, Daniel Michael; Gernot Riether
year	2009
title	From texture to volume: an investigation in quasi-crystalline systems
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	The relation between texture, pattern and massing is a fundamental question in architecture. Classical architecture, as Leon Battista Alberti states in “De re aedificatoria” (Book VI, Chapter 2), is developed through massing and structure first; texture is added afterwards to give the bold massing and structure beauty. Only the ornamentation adds pulcritudo to the raw structure and massing. Rather than starting with a volume and applying texture afterwards, the Digital Girih project started with textural operations that informed the overall volume later. The stereometric, top-down methodology is questioned through the bottom-up methodology of the Girih project. Girih lines of traditional Islamic patterns were used as a starting point. The aspect of 3-dimensionality was developed analogue as well as digital, using the deformability of different materials at various scales and digital construction techniques as parameters. The flexibility within the Girih rules allowed the system to adapt to different tasks and situations and to react to different conditions between 2- and 3- dimensionality. The project in that way explored a bottom-up process of form generation. This paper will describe the process of the project and explain the necessity of digital tools, such as Grasshopper and Rhino, and fabrication tools, such as laser cutter and CNC fabrication technology, that were essential for this process.
keywords	Generative Design; Parametric Design; Tessellation; Form Finding; Scripting
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ijac20097306
id	ijac20097306
authors	Balakrishnan, Bimal; Kalisperis, Loukas N.
year	2009
title	Design Visualization:A Media Effects Approach
source	International Journal of Architectural Computing vol. 7 - no. 3, 415-427
summary	This paper proposes an integrative approach in the evaluative phase of the design process, incorporating concepts, methodologies and measurement strategies that are well established in media psychology. The paper suggests a variable-centered approach for conceptualizing visualization technologies and to evaluate their potential to simulate architectural experience. Psychophysiological measures are introduced to capture the affective component of the architectural experience facilitated by visualization tools such as virtual reality. These are important in order to empirically evaluate the experiential aspects of an architectural space through visualization. Ideas are illustrated with examples drawn from prior and ongoing research collaboration between an architectural visualization lab and a media effects research lab.
series	journal
last changed	2009/10/20 08:02

For more results click below: