Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 593

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2009_samir_foura
id	ascaad2009_samir_foura
authors	Foura, Samir and Samira Debache
year	2009
title	Thermal Simulation In Residential Building Within Computer Aided Architectural Design: Integrated model
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 235-243
summary	Nowadays, the architectural profession is seeking a better energy saving in the design of buildings. The fear of energy shortage in the very near future, together with the rapid rise in energy prices, put pressure on researchers on this field to develop buildings with more efficient heating systems and energy systems. This work is concerned mainly with the development of a software program analyzing comfort in buildings integrated in CAD architectural systems. The problem of presenting the computer with information concerning the building itself has been overcome through integration of thermal analysis with the building capabilities of CAD system. Mainly, such experience concerns the rules for calculating heat loss and heat gain of buildings in Algeria, The program has been developed in order to demonstrate the importance of the innovation of the computer aided-architectural-design field (CAAD) in the technology of buildings such as the three dimensional modeling offering environmental thermal analysis. CAAD is an integrated architectural design system which can be used to carry out many tasks such as working drawings, perspectives and thermal studies, etc., all from the same data. Results are obtained in tabular form or in graphical output on the visual display. The principle of this program is that all input data should be readily available to the designer at the early stages of the design before the user starts to run the integrated model. Particular attention is given to the analysis of thermal aspects including solar radiation gains. Average monthly energy requirement predictions have been estimated depending on the building design aspect. So, this integrated model (CAAD and simulation comfort) is supposed to help architects to decide on the best options for improving the design of buildings. Some of these options may be included at the early design stages analysis. Indications may also be given on how to improve the design. The model stored on CAAD system provides a valuable data base for all sort analytical programs to be integrated into the system. The amount of time and expertise required to use complex analytical methods in architectural practice can be successfully overcome by integration with CAAD system.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	c25d
id	c25d
authors	Shady Attia, Liliana Beltrán, André De Herde and Jan Hensen
year	2009
title	Architect Friendly: A Comparison of Ten Different Building Performance Simulation Tools
source	IBPSA
summary	Performance Simulation tools BPS is available internationally. The users of those tools are mainly researchers, physicists and experts who value empirical validation, analytical verification and calibration of uncertainty as defined by e.g. BESTEST. However, literature and comparative surveys indicate that most architects who use BPS tools in design practice are much more concerned with the (1) Usability and Information Management (UIM) of interface and (2) the Integration of Intelligent design Knowledge-Base (IIKB). Those two issues are the main factors for identifying a building simulation program as “Architect Friendly”. Now, with the advancement of BPS tools and the recent announcements of direct links between BIM or non-BIM modeling tools and BPS tools it is important to compare the existing programs. Based on an online survey, this paper presents the results of comparing ten major BPS tools. The following programs are compared: ECOTECT, HEED, Energy 10, Design Builder, eQUEST, DOE-2, Green Building Studio, IES VE, Energy Plus and Energy Plus-SketchUp Plugin (OpenStudio). With 249 valid responses, the survey ranked the tools in three classes and revealed that architects seek the IIKB above the UIM of the interface. Finally, the paper summarizes the key findings and underlines the major requirements for future improvement and development of BPS tools, mainly from an architectural perspective.
series	other
type	normal paper
email
more	http://www.ibpsa.org/proceedings/BS2009/BS09_0204_211.pdf
last changed	2011/05/24 07:44

_id	ijac20097408
id	ijac20097408
authors	Biloria, Nimish; Valentina Sumini
year	2009
title	Performative Building Skin Systems: A Morphogenomic Approach Towards Developing Real-Time Adaptive Building Skin Systems
source	International Journal of Architectural Computing vol. 7 - no. 4, 643-676
summary	Morphogenomics, a relatively new research area, involves understanding the role played by information regulation in the emergence of diverse natural and artificially generated morphologies. Performative building skin systems as a bottom-up parametric formation of context aware interdependent, ubiquitously communicating components leading to the development of continually performative systems is one of the multi-scalar derivations of the aforementioned Morphogenomic understanding. The agenda of adaptations for these building skins specifically corresponds to three domains of adaptation: structural, behavioral and physiological adaptations resulting in kinetic adaptability, energy generation, conservation, transport and usage principles as well as material property based changes per component. The developed skins adapt in real time via operating upon ubiquitous communication and data-regulation protocols for sensing and processing contextual information. Computational processes and information technology based tools and techniques such as parametric design, real-time simulation using game design software, environmental information mapping, sensing and actuating systems coupled with inbuilt control systems as well as manufacturing physical models in collaboration with praxis form a vital part of these skin systems. These experiments and analysis based on developing intrinsic inter-dependencies between contextual data, structure and material logistics thus lay the foundation for a new era of continually performing, self powering, real-time adaptive intelligent building skin systems.
series	journal
last changed	2010/09/06 08:02

_id	acadia09_130
id	acadia09_130
authors	Kimpian, Judit; Mason, Josh; Coenders, Jeroen; Jestico, Dan; Watts, Steve
year	2009
title	Sustainably Tall: Investment, Energy, Life Cycle
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 130-143
doi	https://doi.org/10.52842/conf.acadia.2009.130
summary	The purpose of this project is to provide an interactive platform for clients and design teams to evaluate the consequences of shape, form, and briefing decisions on the energy use, embodied energy, and capital / life-cycle cost of a tall building early in the design process. The Tall Building Simulation (TBS) model is the result of a collaborative partnership between Aedas, Arup, Hilson Moran (HM), and Davis Langdon (DL). It is estimated that most decisions determining the sustainability of a project are made in the first 1 percent of a project’s program, whereas the majority of the information required for sustainability assessment is not usually available or examined until after the concept stage. By this time, most solutions would need design or briefing changes that are too costly to implement. Using the TBS model, architects, engineers, and clients can simultaneously explore the impact of typical technical and design decisions on a tall building’s energy footprint and its dynamic relationship to cost at the briefing stage.
keywords	Design evaluation, environmental impact, energy, simulation
series	ACADIA
type	Normal paper
email
last changed	2022/06/07 07:52

_id	sigradi2009_833
id	sigradi2009_833
authors	Stoyanov, Momchil
year	2009
title	Análise lumínica virtual de elementos construídos por meio de programação: exemplo de aplicação em software do tipo BIM [ Analysis of Virtual Elements Constructed by Means of Programming: The Example of BIM-Application Software]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	Daylighting is an important part of designing sustainably. Daylighting is the use of natural light for primary interior illumination. This reduces our need for artificial light within the space, thus reducing internal heat gain and energy use. Direct sunlight, once it enters the building, is not only light but heat, and that additional heat will need to be taken into account in your energy analysis." While Autodesk Revit Architecture 2010 (ARA) itself cannot perform the actual analysis, there are some ways to do that. This papper focuses on the study of parametric modeling using a BIM tool for daylighting analysis. This paper presents the first part of the building method of LUME, a plug-in maked whit C# programming language in Microsoft Visual Studio 2010 and ARA Software Developer Kit (SDK) package. The script accepts as its input a standard three dimensional model of building opening and his position on space.
keywords	Script language; BIM; Revit Architecture; Energy analysis; Daylighting; Parametric design process
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	1042
id	1042
authors	Tsai, J J-H and Gero JS
year	2009
title	Unified Energy-Based Qualitative Representation for Building Analysis
source	in J McDonnell and P Lloyd (eds), About: Designing. Analysing Design Meetings, CRC Press, pp. 213-229.
summary	Currently, when designers develop a building design project, different representations are used for different building subsystems, such as spatial system, electrical system, lighting system, hydraulic system and HVAC. These representations are mainly used in the final design documentation stage. This book presents a qualitative approach to the development of a unified energy-based representation for building analysis called qualitative Archi Bond Graphs (QABGs). QABGs integrate different representations in the architectural domain into a unified representation. They can be applied in the conceptual, intermediate, and final building design stages. Combining graphical representations and qualitative equations, QABGs are applicable for building simulation and analysis for building dynamics in the space-people system and the building energy systems, and for energy interactions between the space-people system and the building energy systems.
series	book
type	normal paper
email
more	http://www.amazon.com/Energy-based-Qualitative-Representation-Building-Analysis/dp/3639165470/ref=sr_1_1?ie=UTF8&s=books&qid=1248448107&sr=1-1
last changed	2009/09/11 18:22

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2009_111
id	caadria2009_111
authors	Biswas, Tajin; Ramesh Krishnamurti and Tsung-Hsien Wang
year	2009
title	Framework for Sustainable Building Design
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 43-52
doi	https://doi.org/10.52842/conf.caadria.2009.043
summary	For sustainable building design, computational tools, mostly in the form of simulations, are employed to determine loads and to predict systems performance typically in terms of energy use. Currently, sustainability, in the building domain, is judged by a rating system. Design choices are validated, by measuring against one. The objective of the framework is to provide a general approach to processing the informational needs of any rating system, by identifying, categorizing and organizing relevant data requirements. Aspects of sustainability that designers deal with intuitively will have a structured guideline and gauge as one selects a rating system of choice.
keywords	Sustainable design: rating system; framework; building information model
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2009_165
id	ecaade2009_165
authors	Cardoso, Daniel; Argun, Avni; Rocha, Carlos A.; Gonzalez, Jose
year	2009
title	Drawing Transparencies: ‘Responsible Responsiveness’ in Spaces Through Organic Electrochromism
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 83-88
doi	https://doi.org/10.52842/conf.ecaade.2009.083
wos	WOS:000334282200009
summary	A system for using organic polymers as electrochromic components for a building’s facade is proposed, and early prototypes are presented. The potentialities of such system, Croma, are considered in two aspects: a) as interactive facades that change opacity in reaction to touch –hence “drawing with transparency”- and b) as elements to automate energy-smart behaviors of a building. Some implications are discussed.
keywords	Responsive Surfaces, Smart-Materials, Interactive Architecture, Electrochromism
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia09_291
id	acadia09_291
authors	Hemsath, Timothy L.; McCracken, Brian; Russell, Darin
year	2009
title	Decon Recon: Parametric CADCAM Deconstruction Research
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 291-293
doi	https://doi.org/10.52842/conf.acadia.2009.291
summary	The deconstruction (DeCon) and repurposing (ReCon) of existing structures and materials are worthwhile and relevant endeavors given the potential for such procedures to be more economically and environmentally sustainable than conventional construction methods. Conventional construction methods often utilize virgin materials for the production of architecture, requiring extensive energy to harvest, process, and manufacture the materials for use. Today, we must face the fact that we exist in a carbon-sensitive economy, and demand design approaches that reduce architecture’s impact on the environment. Our goal was to develop a CADCAM ReCon design methodology that would have the potential to mitigate carbon consumption. To explore this goal, students engaged a design research project that looked for novel and innovative approaches to the DeCon and ReCon of an existing barn. The student researchers created parametric models and surface designs derived from the existing materials. The digitally fabricated tectonic design constructions resulted in economical, novel, and material-efficient design methodologies for DeCon and ReCon.
keywords	Fabrication, environment, CADCAM, Parametric Design
series	ACADIA
type	Short paper
email
last changed	2022/06/07 07:49

_id	sigradi2009_779
id	sigradi2009_779
authors	Lima, Thais Borges Sanches; Cláudia Naves David Amorim; Giselle Marie Cormier Chaim
year	2009
title	Simulação do Desempenho Energético de Edifícios de Escritórios em Brasília [Energy performance simulation of Brasília’s office buildings]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This paper presents a parametric analysis where WWR and color glass was varied to determine their influence in the thermal performance of an office building’s room. Design Builder tool was used to calculate the thermal load and the internal gains. The WWR variation in different orientations resulted in a significant increase of the thermal load. The reflective glass allowed a better thermal performance of the room. With the use of computer simulation was possible to analyse many constructive and design characteristics of the facade and its influence on the results, when considered together.
keywords	Energy performance; office buildings; computer simulation; Design Builder
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	cf2011_p060
id	cf2011_p060
authors	Sheward, Hugo; Eastman Charles
year	2011
title	Preliminary Concept Design (PCD) Tools for Laboratory Buildings, Automated Design Optimization and Assessment Embedded in Building Information Modeling (BIM) Tools.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 451-476.
summary	The design of laboratory buildings entails the implementation of a variety of design constraints such as building codes; design guidelines and technical requirements. The application of these requires from designers the derivation of data not explicitly available at early stages of design, at the same time there is no precise methodology to control the consistency, and accuracy of their application. Many of these constraints deal with providing secure environmental conditions for the activities inside laboratories and their repercussions both for the building occupants and population in general, these constraints mandate a strict control over the building‚Äôs Mechanical Equipment (MEP), in particular the Heating Ventilating and Air Conditioning (HVAC) system. Due to the importance of these laboratory designers are expected to assess their designs not only according spatial relationships, but also design variables such as HVAC efficiency, air pressure hierarchies, operational costs, and the possible implications of their design decisions in the biological safety of the facility. At this point in time, there are no practical methods for making these assessments, without having constant interaction with HVAC specialists. The assessment of laboratory design variables, particularly those technical in nature, such as dimensioning of ducts or energy consumption are usually performed at late stages of design. They are performed by domain experts using data manually extracted from design information, with the addition of domain specific knowledge, the evaluation is done mostly through manual calculations or building simulations. In traditional practices most expert evaluations are performed once the architectural design have been completed, the turn around of the evaluation might take hours or days depending on the methods used by the engineer, therefore reducing the possibility for design alternatives evaluation. The results of these evaluations will give clues about sizing of the HVAC equipment, and might generate the need for design reformulations, causing higher development costs and time delays. Several efforts in the development of computational tools for automated design evaluation such as wheel chair accessibility (Han, Law, Latombe, Kunz, 2002) security and circulation (Eastman, 2009), and construction codes (ww.Corenet.gov.sg) have demonstrated the capabilities of rule or parameter based building assessment; several computer applications capable of supporting HVAC engineers in system designing for late concept or design development exist, but little has been done to assess the capabilities of computer applications to support laboratory design during architectural Preliminary Concept Design(PCD) (Trcka, Hensen, 2010). Developments in CAD technologies such as Building Information Modeling (BIM) have opened doors to formal explorations in generative design using rule based or parametric modeling [7]. BIM represents buildings as a collection of objects with their own geometry, attributes, and relations. BIM also allows for the definition of objects parametrically including their relation to other model objects. BIM has enabled the development of automated rule based building evaluation (Eastman, 2009). Most of contemporary BIM applications contemplate in their default user interfaces access to design constraints and object attribute manipulations. Some even allow for the application of rules over these. Such capabilities make BIM viable platforms for automation of design data derivation and for the implementation of generative based design assessment. In this paper we analyze the possibilities provided by contemporary BIM for implementing generative based design assessment in laboratory buildings. In this schema, domain specific knowledge is embedded in to the BIM system as to make explicit design metrics that can help designers and engineers to assess the performance of design alternatives. The implementation of generative design assessments during PCD can help designers and engineers to identify design issues early in the process, reducing the number of revisions and reconfigurations in later stages of design. And generally improving design performance.
keywords	Heating ventilating and Air Conditioning (HVAC), Building Information Models (BIM), Generative Design Assessment
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ascaad2009_bhzad_sidawi
id	ascaad2009_bhzad_sidawi
authors	Sidawi, Bhzad
year	2009
title	The Consideration of Lifelong Owner’s and Property’s Characteristics in Nd Cad System: The case of affordable housing in kingdom of Saudi Arabia
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 191-204
summary	Residential property value is affected by several factors during its useful time. . These factors include people’s lifestyles, traditions and culture, and the way they live and interact with the built environment. The property characteristics such as its location, building quality, adaptability, and energy efficiency would also have an impact on the property value. On the other hand, the nD CAD research that emerged in the late 1990s proposed endless dimensions of CAD modelling that would incorporate the building regulations’ requirements, basic user needs and client requirements. However, there is a need to implement lifelong parameters that would have significant effect on the property value in 3D models during the early stages of design. This can be done through a knowledge base integrated into a 3D model and links the lifelong property’s and the user’s characteristics with the property’s value. A survey was carried out on banks and Real Estate Development Fund (REDF) in the Kingdom of Saudi Arabia to find out the level of impact of lifelong users and property characteristics on the property’s value. The results of the survey showed a number of lifelong property and user driven parameters that may have major impact on the property’s value. The implementation of lifelong parameters in nD CAD models would have a number of benefits. It would provide the decision makers such as banks and investors with a tool to assess the level of impact of possible lifelong factors on the property value and consider alternative schemes. Designers would use it during the early stages of design to produce optimum design solutions that provide an adequate product that is evaluated regarding its lifelong value to the end users. Eventually it would provide a comfortable environment that is tailored to the user’s needs and aspirations, while reserving the property’s lifelong value.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	acadia13_109
id	acadia13_109
authors	Thün, Geoffrey; Velikov, Kathy
year	2013
title	Adaptation as a Framework for Reconsidering High-Performance Residential Design: A Case Study
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 109-118
doi	https://doi.org/10.52842/conf.acadia.2013.109
summary	This paper outlines an approach to adaptive residential design explored through recent research and an executed prototype, the North House project (2007-2009), undertaken through an interdisciplinary collaboration of researchers and students from the University of Waterloo, Ryerson University and Simon Fraser University in concert with professional and industry partners. This project aimed to develop a framework for the delivery of adaptive detached residential buildings capable of net-zero energy performance in the temperate climate zone, or the near north. Within this project, the term “adaptive” is developed across several tracts of conceptualization and execution including site and climatically derived models for building material composition and envelope ratios, environmentally-responsive kinetic envelope components, intelligent HVAC controls and interactive interface design aimed at producing co-evolutionary behaviors between building systems and inhabitants. A provisional definition of adaptive architecture is outlined to address this range of considerations that calls into question the stable image of domestic architecture and its relationship to energy and contemporary assumptions regarding sustainable design. This paper also outlines computational approaches to design optimization, distributed building systems integration and the human-controls interfaces applicable to the home’s ecology of physical and information technologies.
keywords	next generation technology, responsive buildings, high performance envelopes, sensing and feedback, passive and active systems, energy modeling, user interface
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:58

_id	cf2009_458
id	cf2009_458
authors	Dillenburger, Benjamin; Braach, Markus and Hovestadt, Ludger
year	2009
title	Building design as individual compromise between qualities and costs: A general approach for automated building generation under permanent cost and quality control
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 458-471
summary	We introduce an evolutionary design approach for the automatic arrangement of a predefined space program on a given site. The design goal is to distribute floor spaces while ensuring the essential building performance and usage. The presented evolutionary strategy is applied to acquire optimal design solutions considering both environmental conditions and inner organization under diversified fitness functions. The evaluation process consists of the direct analysis of the spatial network and the physical factors in an adequate accuracy. The method provides a fast generation of qualified volumetric studies. The resulting buildings become a manifested compromise between qualities and cost.
keywords	Evolutionary strategy, multi-fitness criteria, dual graph representation, network analysis, building envelope
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	cf2009_poster_23
id	cf2009_poster_23
authors	Thorpe, Graham and Sam Kashuk
year	2009
title	A Syncretization Of Architecture, Engineering And Science:The use of CAD technology as a pedagogical tool in the teaching of environmentally sustainable design
source	T. Tidafi and T. Dorta (eds) Joining Languages Cultures and Visions: CAADFutures 2009 CD-Rom
summary	Energy consumption in buildings is responsible for about 40% of Australia’s greenhouse gas emissions. It is quite feasible that the energy consumption in buildings can be halved, but energy performance analysis must be integral to the entire design process. This imperative has led the authors to propose that architecture, engineering and science should be syncretized in the design process. This syncretization shares some features of the rhizomatic approach introduced by Deleuze and Guattari (2007). In rhizomatic systems all points can be, and should be connected. A rhizome can be considered as a space that develops, not from a point but from milieux. In the expansion of a rhizome, elements of the system do not follow tracings of other elements but they form a map of new vistas. Likewise, a syncretic approach is oblivious to the traditional boundaries between architecture, engineering and science. Syncretization has the potential to enrich the intellectual lives of architects, scientists and engineers, and it would have profoundly beneficial performative benefits.
keywords	Syncretic, rhizome architecture, engineering, sustainability, education
series	CAAD Futures
type	poster
last changed	2009/07/08 22:12

_id	acadia09_30
id	acadia09_30
authors	Aish, Robert
year	2009
title	Tools of Expression: Notation and Interaction for Design Computation
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 30-31
doi	https://doi.org/10.52842/conf.acadia.2009.030
summary	Design considers function, fabrication, and aesthetics collectively. Computation is beginning to affect the competitive dynamics of design. Using algorithms, designers are exploring forms that are essentially “undrawable,” even with advanced modeling and direct manipulation techniques. Determining the appropriate functional characteristics may require the application of increasingly complex structural- and environmental-performance analysis techniques. To realize physically a design may require further geometric analysis and rationalization, and the use of complex computer-controlled fabrication techniques.
keywords	Design, Computation, Form Finding, Design logic
series	ACADIA
type	Keynote paper
email
last changed	2022/06/07 07:54

_id	caadria2009_021
id	caadria2009_021
authors	Ambrose, Michael A.
year	2009
title	BIM and Comprehensive Design Studio Education
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 757-760
doi	https://doi.org/10.52842/conf.caadria.2009.757
summary	Building Information Modeling (BIM) has the potential to fundamentally alter the way composition, scale and abstraction are addressed in today’s comprehensive design studio by displacing the primacy of abstract conventions of representation with a methodology based on systems thinking and virtual simulation. BIM viewed as provocateur of design education provides great potential for the critical analysis of how architectural design is taught. The design studio project reflects new ways of teaching and addressing BIM methods and processes, and critically evaluating their effects and possibilities on architectural production.
keywords	Education; design theory; design studies; animation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	cf2009_119
id	cf2009_119
authors	Boeykens, Stefan; Neuckermans, Herman
year	2009
title	Architectural design analysis, historical reconstruction and structured archival using 3D models: Techniques, methodology and long term preservation of digital models
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 119-132
summary	With the increased usage of 3D modeling, visualization, simulation and Building Information Modeling, architects produce 3D models, both for new designs and for historic reconstructions. However, these models are seldom shared to transfer structured information about the project. Even if they are exchanged, they are often not usable outside of their original design application. Additionally, digital archives with architectural content can not easily provide structured information about these 3D models, limiting their usefulness. This article discusses an approach to provide better structured models, using a combination of a sound methodology, the application of open file formats and additional metadata creation.
keywords	CAAD, design analysis, reconstruction, archival, preservation
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

For more results click below: