Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 591

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2009_152
id	caadria2009_152
authors	Henriques, Gonçalo Castro
year	2009
title	Crafting New Artefacts
doi	https://doi.org/10.52842/conf.caadria.2009.205
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 205-214
summary	The craft of complex artefacts, questioning technological changes and reflecting social and cultural transformation used to be a common attitude in traditional artisans of the pre industrialized society. Traditional craftsman developed special knowledge and skills, implementing their own tools and techniques. After the industrial revolution, the main focus shifted to mass production, and the personalization of artefacts became labour intensive and more expensive. Simultaneously, with technical specialization and the fragmentation of knowledge, the designer’s, builder’s and manufacturer’s approach became more segregated. Currently, information technologies offer new opportunities to the craft of complex objects. The integration of digital process from conception to fabrication, can transform this situation, and as a result personalization is more affordable. Nevertheless, the introduction of these new techniques or tools is lacking a poetic synthesis for the use of technology, and the social and cultural implications that may result of this use. A competition for a public installation was an opportunity to use digital tools to conceive, manufacture and construct a complex structure with a small budget that would be impossible to attain using only traditional tools. At the same time, this project - genetic landscape- could be seen as a metaphor, alluding to the technological interference on the process of creating a new life, or a second nature.
keywords	expanding traditional tools; digital craft; complex geometry built-case
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	cf2009_487
id	cf2009_487
authors	Gursel, Ipek; Sariyildiz, Sevil; Stouffs, Rudi and Akin, Ömer
year	2009
title	Contextual ontology support as external knowledge representation for building information modelling
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 487- 500
summary	There is an increasing awareness of formal ontologies in knowledge-intense problem domains in the AEC industry. This paper analyzes the general use of ontologies, points to the importance of context-dependent ontology descriptions in AEC, and describes the use and management of multiple (external) ontologies as knowledge management tools within a complex information model of a building performance assessment tool CLIP (Computational support for Lifecycle Integral Performance assessment), previously developed by the authors. The paper provides a discussion of our approach, analysis of the benefits and limitations of external ontologies, suggestions for further development and research areas for the integration of multiple AEC knowledge representations.
keywords	Building lifecycle performance assessment, knowledge modeling, contextual ontologies, product models
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	ecaade2009_195
id	ecaade2009_195
authors	Gürer, Ethem; Çagdas, Gülen
year	2009
title	An Emergent Form Generation Method for Supporting Conceptual Design
doi	https://doi.org/10.52842/conf.ecaade.2009.167
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 167-172
summary	Evolutionary design methodologies generally aim to present new form-finding processes, where nature-based approaches are used, such as self-organization, genetic algorithms etc. This paper aims to present a new architectural design approach that focuses on integrating these different evolutionary methods in an emergent process. The main goal is to achieve a high-level of integration where lacking qualities of each evolutionary method are completed by the other one in a synergic and especially emergent behavior. A multi-level design approach is described in this study. Points highlighted are concerned with the pre-design phases. Within a bottom-top simulation, an infinite high-level solution cluster is revealed from behavioral interactions and collectivity of the low-level entities: agents. Simulated design process is visualized by a determined project area in Istanbul: Kuruçe_me Island on the Bosphorus as an exhibition center. Programmed in 3dsMax, simulation phase supports the creative design process in early phases.
wos	WOS:000334282200020
keywords	Evolutionary design, bottom-top approach, self-organization, agent, emergence
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ijac20097301
id	ijac20097301
authors	Kolarevic, Branko
year	2009
title	Towards Integrative Design
source	International Journal of Architectural Computing vol. 7 - no. 3, 335-344
summary	For many, integration within the building industry is seen as a likely outcome as architecture, engineering, and construction fully engage the digital technologies in the design, analysis, and production of buildings. Concepts such as integrated design, integrated practice and integrated project delivery (IPD) have gained prominence in architecture over the past several years as relatively new paradigms.What is usually meant by these terms is a multidisciplinary, collaborative approach to design in which various participants from the building industry – architects, engineers, contractors, fabricators, etc. – participate jointly from the earliest stages of design, fluidly crossing the conventional disciplinary and professional boundaries to deliver an innovative product at the end.
series	journal
last changed	2009/10/20 08:02

_id	ascaad2009_said_mazouz
id	ascaad2009_said_mazouz
authors	Mazouz, Said
year	2009
title	A Conceptual Framework for a Decision Making Aid in the Design Process: Reference to environmental issues
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 135-151
summary	The research, which is the subject of this paper, is concerned with the integration of the environmental variables in the process of architectural design. It is contended that the theory and the architectural practice are characterised by everlasting series of determinisms, which make some design variables to be eluded in the design process. Several hypotheses are put forward in order to explain the factors inhibiting a complex approach to architectural design. It is shown that the solution of such a problem requires the formulation of a theoretical paradigm possessing its own postulates, axioms and speaking the language of the architect. The notion of ‘type’, transformed in a ‘generic type’, embodying’ multifaceted knowledge is put forward as a concept in the way to defining a design process. The typology embodies an important applicability potential, which, associated with that of the computer, namely; expert systems and case based reasoning, may contribute to the decisive integration of the physical factors of the environment in the process of architectural design.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	acadia13_109
id	acadia13_109
authors	Thün, Geoffrey; Velikov, Kathy
year	2013
title	Adaptation as a Framework for Reconsidering High-Performance Residential Design: A Case Study
doi	https://doi.org/10.52842/conf.acadia.2013.109
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 109-118
summary	This paper outlines an approach to adaptive residential design explored through recent research and an executed prototype, the North House project (2007-2009), undertaken through an interdisciplinary collaboration of researchers and students from the University of Waterloo, Ryerson University and Simon Fraser University in concert with professional and industry partners. This project aimed to develop a framework for the delivery of adaptive detached residential buildings capable of net-zero energy performance in the temperate climate zone, or the near north. Within this project, the term “adaptive” is developed across several tracts of conceptualization and execution including site and climatically derived models for building material composition and envelope ratios, environmentally-responsive kinetic envelope components, intelligent HVAC controls and interactive interface design aimed at producing co-evolutionary behaviors between building systems and inhabitants. A provisional definition of adaptive architecture is outlined to address this range of considerations that calls into question the stable image of domestic architecture and its relationship to energy and contemporary assumptions regarding sustainable design. This paper also outlines computational approaches to design optimization, distributed building systems integration and the human-controls interfaces applicable to the home’s ecology of physical and information technologies.
keywords	next generation technology, responsive buildings, high performance envelopes, sensing and feedback, passive and active systems, energy modeling, user interface
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:58

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cf2011_p108
id	cf2011_p108
authors	Iordanova, Ivanka; Forgues Daniel, Chiocchio François
year	2011
title	Creation of an Evolutive Conceptual Know-how Framework for Integrative Building Design
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 435-450.
summary	Low productivity of the building sector today is attributed to the fragmentation of tasks, disciplines and responsibilities, as well as to the resistance to adopt integrative work processes and digital means. The increased complexity of architectural projects and the aroused social consciousness for sustainable environment calls for integrative design collaboration. Thus, there is need for a Conceptual Framework combining work processes, technological means and policy aspects. According to the literature, integrative multidisciplinary design is a strategy resulting in high performance buildings nurturing sustainable way of living (Reed et al. 2009, Krygiel & Nies 2008). Responding to the increased technological complexity of our built environment, as well as to the objective of meeting multiple criteria of quality, both necessitating multidisciplinary collaboration during design, Building Information Modeling (BIM) is seen as a powerful means for fostering quality, augmenting productivity and decreasing loss in construction. Based on recent research, we can propose that a sustainable building can be designed through an integrative design process (IDP) which is best supported by BIM. However, our ongoing research program and consultations with advanced practitioners underscore a number of limitations. For example, a large portion of the interviewed professionals and construction stakeholders do not necessarily see a link between sustainable building, integrative design process and BIM, while in our opinion, their joint use augments the power of each of these approaches taken separately. Thus, there is an urgent necessity for the definition of an IDP-BIM framework, which could guide the building industry to sustainable results and better productivity. This paper defines such a framework, whose theoretical background lays on studies in social learning (activity theory and situated action theories). These theories suggest that learning and knowledge generation occurs mainly within a social process defined as an activity. This corresponds to the context in which the IDP-BIM framework will be used, its final objective being the transformation of building design practices. The proposed IDP-BIM framework is based on previous research and developments. Thus, firstly, IDP process was well formalized in the Roadmap for the Integrated Design Process‚ (Reed et al.) which is widely used as a guideline for collaborative integrative design by innovating practices in USA and Canada. Secondly, the National Building Information Modeling Standard (NBIMS) of the USA is putting an enormous effort in creating a BIM standard, Succar (2008) recently proposed a conceptual framework for BIM, but BIM ontology is still under development (Gursel et al 2009). Thirdly, an iterative design process bound to gating reviews (inspired from software development processes) was found to be successful in the context of multidisciplinary design studios (reported in our previous papers). The feedback from this study allowed for modifications and adjustments included in the present proposal. The gating process assures the good quality of the project and its compliance to the client's requirements. The challenge of this research is to map the above mentioned approaches, processes and technologies into the design process, thus creating an integrated framework supporting and nurturing sustainable design. The IDP-BIM framework can be represented by a multidimensional matrix linked to a semantic network knowledge database: - the axes of the matrix being the project timeline, the design process actors and building stakeholders (architect, engineers, client, contractor, environmental biologist, etc.), or different aspects of building performance (environmental, functional, social, interior environment quality, cost, etc.); and - the knowledge database providing multiple layers of semantic support in terms of process, domain knowledge, technology and workflow at a given moment of the project and for a given actor or building aspect. The IDP-BIM framework is created as an evolutive digital environment for know-how and will have an established protocol for regular updates. The paper will firstly present the state of the art in IDP and BIM. Secondly, it will expose the methodology used for the definition of the Framework, followed by a description of its structure, contents and digital implementation. Then, some scenarios for the use of the Framework will be shown as validation.
keywords	integrated design process, BIM, multidisciplinary design, conceptual framework
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cf2009_410
id	cf2009_410
authors	Abdelhameed, Wael
year	2009
title	Reciprocal relationship of conceptualization and design problem definition: A proposed approach for an architectural design studio
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 410-422
summary	This research paper proposes an approach to be applied in the design studio. The proposed approach highlights the reciprocal relationship between concept articulation and design problem definition in a design method that exposes different design activities related to this relationship. The design method was applied in a design studio of an intermediate level. The study reports the analysis of student designs in terms of the deign method employed. Moreover, a survey was carried out in order to measure the responses of students and instructors regarding the design method and its approach. The main structure of the design method proposed can be described as follows: although the relationship of concept articulation and design-problem definition are reciprocal, the influence of one direction can be distinguished more than of the other direction on different design activities. The research using qualitative and quantitative methodologies analyzes the results and outputs of the theoretical investigations, the practical application in the design studio, and the questionnaire responses through different methodological tools.
keywords	Conceptual design, design method, architectural design studio
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	acadia18_216
id	acadia18_216
authors	Ahrens, Chandler; Chamberlain, Roger; Mitchell, Scott; Barnstorff, Adam
year	2018
title	Catoptric Surface
doi	https://doi.org/10.52842/conf.acadia.2018.216
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 216-225
summary	The Catoptric Surface research project explores methods of reflecting daylight through a building envelope to form an image-based pattern of light on the interior environment. This research investigates the generation of atmospheric effects from daylighting projected onto architectural surfaces within a built environment in an attempt to amplify or reduce spatial perception. The mapping of variable organizations of light onto existing or new surfaces creates a condition where the perception of space does not rely on form alone. This condition creates a visual effect of a formless atmosphere and affects the way people use the space. Often the desired quantity and quality of daylight varies due to factors such as physiological differences due to age or the types of tasks people perform (Lechner 2009). Yet the dominant mode of thought toward the use of daylighting tends to promote a homogeneous environment, in that the resulting lighting level is the same throughout a space. This research project questions the desire for uniform lighting levels in favor of variegated and heterogeneous conditions. The main objective of this research is the production of a unique facade system that is capable of dynamically redirecting daylight to key locations deep within a building. Mirrors in a vertical array are individually adjusted via stepper motors in order to reflect more or less intense daylight into the interior space according to sun position and an image-based map. The image-based approach provides a way to specifically target lighting conditions, atmospheric effects, and the perception of space.
keywords	full paper, non-production robotics, representation + perception, performance + simulation, building technologies
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	ascaad2014_023
id	ascaad2014_023
authors	Al-Maiyah, Sura and Hisham Elkadi
year	2014
title	Assessing the Use of Advanced Daylight Simulation Modelling Tools in Enhancing the Student Learning Experience
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 303-313
summary	In architecture schools, where the ‘studio culture’ lies at the heart of students’ learning, taught courses, particularly technology ones, are often seen as secondary or supplementary units. Successful delivery of such courses, where students can act effectively, be motivated and engaged, is a rather demanding task requiring careful planning and the use of various teaching styles. A recent challenge that faces architecture education today, and subsequently influences the way technology courses are being designed, is the growing trend in practice towards environmentally responsive design and the need for graduates with new skills in sustainable construction and urban ecology (HEFCE’s consultation document, 2005). This article presents the role of innovative simulation modelling tools in the enhancement of the student learning experience and professional development. Reference is made to a teaching practice that has recently been applied at Portsmouth School of Architecture in the United Kingdom and piloted at Deakin University in Australia. The work focuses on the structure and delivery of one of the two main technology units in the second year architecture programme that underwent two main phases of revision during the academic years 2009/10 and 2010/11. The article examines the inclusion of advanced daylight simulation modelling tools in the unit programme, and measures the effectiveness of enhancing its delivery as a key component of the curriculum on the student learning experience. A main objective of the work was to explain whether or not the introduction of a simulation modelling component, and the later improvement of its integration with the course programme and assessment, has contributed to a better learning experience and level of engagement. Student feedback and the grade distribution pattern over the last three academic years were collected and analyzed. The analysis of student feedback on the revised modelling component showed a positive influence on the learning experience and level of satisfaction and engagement. An improvement in student performance was also recorded over the last two academic years and following the implementation of new assessment design.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	sigradi2021_50
id	sigradi2021_50
authors	Albuquerque, Dilson and Andrade, Max
year	2021
title	The Impacts of Collaboration and Cordination of Architectural and Engineering Projects Developed with BIM in Reducing Design Interferences
source	Gomez, P and Braida, F (eds.), Designing Possibilities - Proceedings of the XXV International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2021), Online, 8 - 12 November 2021, pp. 783–794
summary	This paper addresses the importance and development of cultural transformations involving the design process in architecture and the advent of Building Information Modeling (BIM) in civil construction activities and how its implementation in a coordinated, collaborative and interoperable way contributes to a diagnosis of Clash Detection between diferentes design projects, before building construction, saving excessive costs and rework. Taking as its main reference the BIM Maturity Matrix of Succar (2009), the proposed BIM Project Integration Maturity Matrix contributes to the awareness of bringing designers and builders closer to design activities, to encourage the integration of design processes involving the building, to consolidate an environment of ease of communication between participants, the organization of documentation and, above all, prioritize the compatibility between projects to avoid conflicts, excess costs and rework, resulting in a higher quality of the final project.
keywords	Coordenaçao de projetos, detecçao de interferencias, Building Information Modeling, matriz de avaliaçao, projeto integrado
series	SIGraDi
email
last changed	2022/05/23 12:11

_id	acadia17_102
id	acadia17_102
authors	Aparicio, German
year	2017
title	Data-Insight-Driven Project Delivery: Approach to Accelerated Project Delivery Using Data Analytics, Data Mining and Data Visualization
doi	https://doi.org/10.52842/conf.acadia.2017.102
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 102-109
summary	Today, 98% of megaprojects face cost overruns or delays. The average cost increase is 80% and the average slippage is 20 months behind schedule (McKinsey 2015). It is becoming increasingly challenging to efficiently support the scale, complexity and ambition of these projects. Simultaneously, project data is being captured at growing rates. We continue to capture more data on a project than ever before. Total data captured back in 2009 in the construction industry reached over 51 petabytes, or 51 million gigabytes (Mckinsey 2016). It is becoming increasingly necessary to develop new ways to leverage our project data to better manage the complexity on our projects and allow the many stakeholders to make better more informed decisions. This paper focuses on utilizing advances in data mining, data analytics and data visualization as means to extract project information from massive datasets in a timely fashion to assist in making key informed decisions for project delivery. As part of this paper, we present an innovative new use of these technologies as applied to a large-scale infrastructural megaproject, to deliver a set of over 4,000 construction documents in a six-month period that has the potential to dramatically transform our industry and the way we deliver projects in the future. This paper describes a framework used to measure production performance as part of any project’s set of project controls for accelerated project delivery.
keywords	design methods; information processing; data mining; big data; data visualization
series	ACADIA
email
last changed	2022/06/07 07:55

_id	ijac20097306
id	ijac20097306
authors	Balakrishnan, Bimal; Kalisperis, Loukas N.
year	2009
title	Design Visualization:A Media Effects Approach
source	International Journal of Architectural Computing vol. 7 - no. 3, 415-427
summary	This paper proposes an integrative approach in the evaluative phase of the design process, incorporating concepts, methodologies and measurement strategies that are well established in media psychology. The paper suggests a variable-centered approach for conceptualizing visualization technologies and to evaluate their potential to simulate architectural experience. Psychophysiological measures are introduced to capture the affective component of the architectural experience facilitated by visualization tools such as virtual reality. These are important in order to empirically evaluate the experiential aspects of an architectural space through visualization. Ideas are illustrated with examples drawn from prior and ongoing research collaboration between an architectural visualization lab and a media effects research lab.
series	journal
last changed	2009/10/20 08:02

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2011_136
id	ecaade2011_136
authors	Bohnenberger, Sascha; de Rycke, Klaas; Weilandt, Agnes
year	2011
title	Lattice Spaces: Form optimisation throgh customization of non developable 3d wood surfaces
doi	https://doi.org/10.52842/conf.ecaade.2011.751
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.751-758
summary	This paper discusses a collaborative project by RDAI architects, Bollinger+Grohmann and the timber construction company Holzbau Amann. The project is located in a former swimming pool in Paris and it is part of the new interior of a flagship store of the French fashion label Hermes. In late 2009, Rena Duma Architects, asked Bollinger+Grohmann to collaborate as structural engineers on a challenging design proposal within a very short timeframe. Three wooden lattice structures, the so-called “bulle” and one monumental staircase with a similar design approach characterize the interior of the new flagship store. The lattice structures are dividing the basement into different retail spaces. They vary in height (8-9 m) and diameter (8-12 m) and have a free-form shaped wicker basket appearance. Wood was the chosen material for these structures to strengthen the idea of the wickerbaskets and to create an interior space with a sustainable and innovative material.
wos	WOS:000335665500087
keywords	Digital production; parametric design; mass customization; wood; digital crafting
series	eCAADe
email
last changed	2022/05/01 23:21

_id	sigradi2009_708
id	sigradi2009_708
authors	Bruscato, Underlea Miotto
year	2009
title	Espacios de Encuentro y Memoria para enclaves patrimoniales en el sur de Brasil [Memory and Meeting Places for heritage settlements in the southern Brazil]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This paper exposes the development of heritage settlements in southern Brazil and virtual systems to diffuse cultural features and touristic services. These settlements are related to European immigration and diverse economic and cultural activities spread on mountain regions. Including religious missions, vineyards, agriculture, bakery, etc. They requires information systems to proper diffusion and exploitation. It proposes an virtual system based on territorial data, linked to cultural and touristic information, as well 3D models of architectural landmarks and social networks. That suggest an integrated approach the cultural and economic development of heritage settlements.
keywords	Virtual heritage; Social Networks; Brazil
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cf2011_p135
id	cf2011_p135
authors	Chen Rui, Irene; Schnabel Marc Aurel
year	2011
title	Multi-touch - the future of design interaction
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 557-572.
summary	The next major revolution for design is to bring the natural user interaction into design activities. Graphical User Interfaces (GUI) brought a new approach that was more effective compared to their conventional predecessors. In recent years, Natural User Interfaces (NUI) have advanced user experiences and multi-touch and gesture technologies provide new opportunities for a variety of potential uses in design. Much attention has been paid to leverage in the design of interactive interfaces. The mouse input and desktop screen metaphors limit the information sharing for multiple users and also delayed the direct interaction for communication between each other. This paper proposes the innovative method by integrating game engine ‘Unity3D’ with multi-touch tangible interfaces. Unity3D provides a game development tool as part of its application package that has been designed to let users to focus on creating new games. However, it does not limit the usage of area to design additional game scenarios since the benefits of Unity3D is allowing users to build 3D environments with its customizable and easy to use editor, graphical pipelines to openGL (http://unity3d.com/, 2010 ). It creates Virtual Reality (VR) environments which can simulates places in the real world, as well as the virtual environments helping architects and designers to vividly represent their design concepts through 3D visualizations, and interactive media installations in a detailed multi-sensory experience. Stereoscopic displays advanced their spatial ability while solving issues to design e.g. urban spaces. The paper presents how a multi-touch tabletop can be used for these design collaboration and communication tasks. By using natural gestures, designers can now communicate and share their ideas by manipulating the same reference simultaneously using their own input simultaneously. Further studies showed that 3Dl forms are perceived and understood more readily through haptic and proprioceptive perception of tangible representations than through visual representation alone (Gillet et al, 2005). Based on the authors’ framework presented at the last CAADFutures, the benefits of integrating 3D visualization and tactile sensory can be illustrated in this platform (Chen and Wang, 2009), For instance, more than one designer can manipulate the 3D geometry objects on tabletop directly and can communicate successfully their ideas freely without having to waiting for the next person response. It made the work more effective which increases the overall efficiency. Designers can also collect the real-time data by any change they make instantly. The possibilities of Uniy3D make designing very flexible and fun, it is deeply engaging and expressive. Furthermore, the unity3D is revolutionizing the game development industry, its breakthrough development platform for creating highly interactive 3D content on the web (http://unity3d.com/ , 2010) or similar to the interface of modern multimedia devices such as the iPhone, therefore it allows the designers to work remotely in a collaborative way to integrate the design process by using the individual mobile devices while interacting design in a common platform. In design activities, people create an external representation of a domain, often of their own ideas and understanding. This platform helps learners to make their ideas concrete and explicit, and once externalized, subsequently they reflect upon their work how well it sits the real situation. The paper demonstrates how this tabletop innovatively replaces the typical desktop metaphor. In summary, the paper addresses two major issues through samples of collaborative design: firstly presenting aspects of learners’ interactions with physical objects, whereby tangible interfaces enables them constructing expressive representations passively (Marshall, 2007), while focussing on other tasks; and secondly showing how this novel design tool allows designers to actively create constructions that might not be possible with conventional media.
keywords	Multi-touch tabletop, Tangible User Interface
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2009_208
id	caadria2009_208
authors	Chen, Irene Rui; Marc Aurel Schnabel
year	2009
title	Retrieving Lost Space With Tangible Augmented Reality
doi	https://doi.org/10.52842/conf.caadria.2009.135
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 135-142
summary	Tangible Augmented Reality can be an innovative way for designers to understand the spatial conception. Due to the high integration of tactile and vision, this realm allows users to gain a better understanding how to retrieve ‘lost space’ in an urban context. By using a variety of visualisation methods, such as wireframe and transparencies, hidden or other ways unperceivable (lost) space is made available. With the aid of Tangible Augmented Reality designers are subsequently able to evaluate the design context and its solution more holistically. This paper argues that the retrieval of lost space enhances the design communication.
keywords	Tangible augmented reality; tangible user interface; augmented reality
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaade2009_002
id	ecaade2009_002
authors	Choo, Seung Yeon; Heo, Kyu Souk; Seo, Ji Hyo; Kang, Min Soo
year	2009
title	Augmented Reality- Effective Assistance for Interior Design: Focus on Tangible AR Study
doi	https://doi.org/10.52842/conf.ecaade.2009.649
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 649-656
summary	This article presents an application of Augmented Reality technology for interior design. Plus, an Educational Interior Design Project is reviewed. Along with the dramatic progress of digital technology, virtual information techniques are also required for architectural projects. Thus, the new technology of Augmented Reality offers many advantages for digital design and construction fields. AR is also being considered as a new design approach for interior design. In an AR environment, virtual furniture can be displayed and modified in real-time on the screen, allowing the user to have an interactive experience with the virtual furniture in a real-world environment. Finally, this study proposes a new method for applying AR technology to interior design work, where a user can view virtual furniture and communicate with 3D virtual furniture data using a dynamic and flexible user interface. Plus, all the properties of the virtual furniture can be adjusted using occlusion based interaction methods for a Tangible Augmented Reality.
wos	WOS:000334282200078
keywords	Interior design, augmented reality, ARToolKit, tangible AR, interactive augmented reality
series	eCAADe
email
last changed	2022/06/07 07:56

For more results click below: