Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 593

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2009_016
id	caadria2009_016
authors	Hemsath, Timothy L. ; Ronald Bonnstetter, Leen-Kiat Soh and Robert Williams
year	2009
title	Digital CADCAM Pedagogy
doi	https://doi.org/10.52842/conf.caadria.2009.277
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 277-284
summary	Prototype manufacturing as an educational tool has been very successful at the college level in architecture and engineering design. This paper discusses an innovative inquiry-based learning approach rather than the problem-based learning models commonly utilized by other similar programs. For example, several research-funded technology projects (e.g., Cappelleri et al. 2007) look at involving students in problembased learning exercises (e.g., building robots); however, these exercises (while providing valuable experiences) have predetermined outcomes ingrained by the teachers, the project structure, and the components used to construct the devices. Therefore, inquisitive and creative problem solving is limited to the “kit-of-parts” in their approach to solving the problem. The inquiry-based CADCAM pedagogy model is more concerned with the process of solving a problem through the vehicle of prototyping than with the specificity of the design project itself. This approach has great potential. First, the need to solve the problem drives learning on multiple levels, integrating interdisciplinary ideas into the problem and solution. Second, the problem interlocks disciplines through inquiry knowledge building in team exercises. Finally, it encourages diversity and flexibility by allowing students to look at problems from multiples perspectives and points of view.
keywords	Inquiry-based education: CAD; CAM; pedagogy
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2009_911
id	sigradi2009_911
authors	Teixeira, Fábio Gonçalves; Sérgio Leandro dos Santos
year	2009
title	VirtusCADE, um Sistema para o Design Virtual de Produtos [VirtusCADE, A system for virtual design of products]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	The knowledge of latest technology that allows the development of competitive products in reduced times is crucial to guarantee a sustainable growth of the national industry. This work presents the development of a computational system for the Virtual Design of products, the VirtusCADE, which is a CAD/CAE interactive software (Computer Aided Design/Computer Aided Engineering). The VirtusCADE includes 3D geometric modeling of surfaces and solids and mesh generation. The system uses the parametric modeling of surfaces, including algorithms for determination of intersection between surfaces and for triangular mesh generation in trimmed parametric surfaces. The graphical interface is interactive and allows the direct real time manipulation of objects (lines, surfaces and solids) in 3D using the OpenGL technology. The system prioritizes the usability, implementing several graphic tools that facilitate the manipulation in 3D. The VirtusCADE contemplates the structural simulation through the Finite Element Method. The code architecture is based on oriented object programming, which allows great scaling capability for the implementation of new tools. This project has great applicability in numerical simulation of physical phenomena, such structural analysis of buildings, vehicles parts, with impact in the industries of civil construction, metal-mechanics, aerospatial, naval and automotive.
keywords	Virtual Design; Geometric modeling; Finite elements
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	ecaade2009_000
id	ecaade2009_000
authors	Çagdas, Gülen; Çolakoglu, Birgül (eds.)
year	2009
title	COMPUTATION: The New Realm of Architectural Design
doi	https://doi.org/10.52842/conf.ecaade.2009
source	27th eCAADe Conference Proceedings [ISBN 978-0-9541183-8-9], Istanbul (Turkey) 16-19 September 2009, 854 p.
summary	In the field of architecture, computational design has emerged as sub-discipline having a multidisciplinary nature and using computing methods and capabilities to understand and solve architectural design problems. Computational design is based on computational thinking that includes a range of mental tools in solving problems, designing systems, and understanding human behavior. It has drawn on the concepts of mathematics and computer science. Computational design elements are derived from both theoretical science and experimental design in such a way that its mechanism relies heavily on mathematical logic, but once built, experimentation is done by varying one parameter at a time to study individual changes. It is a design model, not design itself. Computational design involves applying appropriate computational mechanisms, algorithms, or methods to architecture in order to solve design problems and develop design applications. This process creates systems that can be used as design tools for exploring and forming entirely new design concepts and strategies. Over the next decade, computation will have a great impact on design world. It will solve more complex design problems with greater accuracy and be applied by more designers more routinely—it will go deeper and wider. However, the greatest change that it will bring is the breaking down of barriers between scientific domains and design, enabling real “design science.” Computation is already a key driver in “joined-up” research. It forces scientists and designers to think deeper and wider. Some people have considered it to be the enemy of creativity. In their opinion, designers simply must do things rather than think about what they are doing and how they are doing it. Deeper thinking is associated with scientific rather than designer thinking. The fact is that some of the most innovative and creative work is being done by people who have developed computational thinking skills and know other disciplines along with computing. The theme of eCAADe 2009 conference, Computation: The New Realm of Architectural Design, is devoted to exploring the ramifications of this view for the domain of design: research, education, and practice. We believe that the most intriguing research questions that will emerge from the advent of new and more powerful computational devices—and from the design tools that make use of them—will be in the realm of developmental design science.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ascaad2009_mai_abdelsalam
id	ascaad2009_mai_abdelsalam
authors	Abdelsalam, Mai
year	2009
title	The Use of the Smart Geometry through Various Design Processes: Using the programming platform (parametric features) and generative components
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 297-304
summary	The emergence of parametric generative design tools and prototyping manufacturing technology led to radical changes in architectural morphologies. This change increased the opportunity to develop innovative smart geometries. Integrating these algorithms in the parametric softwares led to variations in building design concepts increasing alternatives and decreasing the repetitive work previously needed in conventional CAD software. The chosen software in this research is Generative Components (GC). It is a software design tool for an associative and parametric design platform. It is tested for using Global Variables with associative functions during the concept creation and form GC comprises features. The results presented in this research may be considered an introduction to the smart geometry revolution. It deals with the generative design which applied in the design process from conceptual design phase, defining the problem, exploring design solutions, then how to develop the design phases. Office building is a building type which encourages new forms that needs computational processes to deal with repetitive functions and modular spaces and enclosed in a flexible creative structural skin. Generative design helps the office buildings to be arranged, analysed, and optimized using parameters in early stages in design process. By the end of the research, the use of the smart geometry in a high rise office building is defined and explained. The research is divided into three parts, first a summary of the basic theories of office buildings design and the sustainable requirements that affect it, and should be integrated. Secondly, the previous experiences in generating office buildings by Norman foster and Sergio Araya. At last, a case study is proposed to test and evaluate the use of the parametric generative methodology in designing an office building with specific emphasis on the function, environmental aspects and form generation using Generative Components (GC) Software.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	caadria2009_030
id	caadria2009_030
authors	Lai, Ih-Cheng; Teng-Wen Chang
year	2009
title	One Map Many Ideas : How Novice Designers Generate Conceptual Designs From An Idea Map
doi	https://doi.org/10.52842/conf.caadria.2009.341
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 341-350
summary	Brainstorming is a method for creative problem solving in the design studio learning. In brainstorming, linking ideas is regarded as searching design in design space which is constructed by a graph-like knowledge structure between participants’ knowledge. Idea Map provides the potential knowledge representation for representing such design space. This research conducts an experiment to understand how novice designers generate conceptual designs through an idea map. Finally, a preliminary computational mechanism for controlling an effective map size to develop conceptual designs is proposed.
keywords	Linking ideas: idea map; design space; conceptual design; brainstorming
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	sigradi2022_112
id	sigradi2022_112
authors	Toledo, Jimena
year	2022
title	The Role of Visual Platforms -visual Social Media- in the Creative Design Process
source	Herrera, PC, Dreifuss-Serrano, C, Gómez, P, Arris-Calderon, LF, Critical Appropriations - Proceedings of the XXVI Conference of the Iberoamerican Society of Digital Graphics (SIGraDi 2022), Universidad Peruana de Ciencias Aplicadas, Lima, 7-11 November 2022 , pp. 639–650
summary	In the current design practice, new digital tools have emerged -visual- also called Infrastructures (Perkel, 2011) such as; Behance 2003, Pinterest 2009, Archdaily 2008, Instagram (2010) -to cite the most recognized in the creative field in Argentina-, which promote different opportunities and support the creative process and problem solving, making it easier for designers to find inspiring material through the Internet. However, very little is known about how these new practices affect professional work, how they themselves see it and the tensions they generate.This article will present the results of a general survey applied to expert designers as part of the first stage of the Doctoral Research project. Which investigates the behavior referred specifically to the use of visual platforms -visual social media- in order to understand, characterize, describe the use and involvement of them within the design process.
keywords	Project processes - Creativity - Design process - Visual Social Media -Curatorial Practice
series	SIGraDi
email
last changed	2023/05/16 16:56

_id	ascaad2009_wael_abdelhameed
id	ascaad2009_wael_abdelhameed
authors	Abdelhameed, Wael
year	2009
title	Assessment of a Physical Planning Project through Virtual Reality: A case study
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 365-378
summary	The study reports an application of VR models in the assessment of a part of physical planning project. The project outputs were different reports, GIS data and maps, and CAD drawings. The GIS data were used to create the VR models by importing Shpfiles of the GIS project outputs to VR software. The study presents VR models and the assessment of the physical planning project in terms of: 1) effect of the population increase, 2) effect of the required residential units, and 3) quality assurance for the current situation and future situation. The method used to build up the VR Models was through satellite images (by Google Earth Pro) and VR software (by UC Win/Road). Different models were built up to visualize and assess the alternative solutions and various influential factors. The study employed Virtual Reality in various urban and planning problems through models that are employed as tools of communication and design. The visualized environment and the associated models facilitated the evaluation of important areas, namely: impact of different factors and alternative solutions. The study concludes that the processes, such as decision making, visualization and representation, performed through VR manifest its importance to different design phases of urban and physical planning.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	cf2009_poster_07
id	cf2009_poster_07
authors	Ashraf, Mohamed-Ahmed and Pierre Côté
year	2009
title	The Impact of Three Cognitive Functions on Digital Media Aided Architectural Ideation: A Proposed Investigation
source	T. Tidafi and T. Dorta (eds) Joining Languages Cultures and Visions: CAADFutures 2009 CD-Rom
summary	From a cognitivist perspective the architectural design seen as an iterative process of search for an “acceptable” solution from initial design assumptions (Simon 1974) requires representation. These representation which may be internal (mental/cognitive activities) and external (sketches 3D models) are essential to any creative act and in all phases of the design process since they constitute a projection of the architect’s thought and know-how.
keywords	Cognitive function, ideation
series	CAAD Futures
type	poster
email
last changed	2009/07/08 22:12

_id	ecaade2009_005
id	ecaade2009_005
authors	Gül, Leman Figen
year	2009
title	Studying the Impact of Immersion on Design Cognition
doi	https://doi.org/10.52842/conf.ecaade.2009.615
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 615-622
summary	With the recent developments in information and communication technologies, designers have adapted digital tools and new ways of designing into their practice. In order to develop efficient systems for designing, the adaptation of new tools and techniques in design practice requires a better understanding of how designers employ the digital medium and what impact the digital medium have on designers’ cognition. The latter one is the subject of this paper. The paper presents the methodology and the initial results of a pilot to investigate the impact of immersion on design cognition. The initial result of the pilot study indicates that the designers were able to adapt to each design environment which affords different kinds of activities and requires different cognitive load.
wos	WOS:000334282200074
keywords	Design cognition, digital design environments, virtual worlds, protocol analysis, immersion
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaade2022_302
id	ecaade2022_302
authors	Lu, Xin, Meng, Zeyuan, Rodriguez, Alvaro Lopez and Pantic, Igor
year	2022
title	Reusable Augmented Concrete Casting System - Accessible method for formwork manufacturing through holographic guidance
doi	https://doi.org/10.52842/conf.ecaade.2022.1.371
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, pp. 371–380
summary	Reinforced concrete has been one of the essential materials for modern architecture for the last hundred years. Its use is entirely global, having been adopted by all cultures and styles since its invention in the late 19th century. Although its value is excellent due to its low cost, durability and adaptability, its environmental impact is significant, being, in fact, one of the most polluting industries in the world (Babor et al. 2009). This experimental project will research a more sustainable use of concrete, exploring a new form of reusable concrete formwork that will ideally reduce the CO2 footprint by removing wood waste in the casting process and replacing it with adaptable metal components. The modular part-based system for the concrete casting also attempts to simplify one of the current complexities for concrete construction, the Skilled-Labour shortage. (Yusoff et al. 2021). To mitigate this problem, the project also proposes using an Augmented Assembly logic for the casting parts to guide the ensemble and dismantle the formwork through an optimised algorithmic logic. The use of Augmented Reality as a replacement for traditional paper instructions will facilitate access to more workers to this construction art and potentially improve access to optimised use of concrete in developing communities with restricted building technological resources.
keywords	Mixed Reality, Distributed Manufacturing, Augmented Manufacturing, Sustainability, Computational Design, Concrete Casting
series	eCAADe
email
last changed	2024/04/22 07:10

_id	ascaad2009_giuseppe_pellitteri
id	ascaad2009_giuseppe_pellitteri
authors	Pellitteri, Giuseppe; Raimondo Lattuca, Salvatore Concialdi, Giuseppe Conti and Raffaele De Amicis
year	2009
title	Architectural Shapes Generated in 3DGeobrowser through Environmental Constraints
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 281-295
summary	The final configuration of the architectural shape is deeply conditioned by all constraints that the environmental context imposes. These, duly codified, can therefore generative elements that can be managed by the designer. Following a parametric approach, the architectural envelope is directly related to the constraints emerging from the urban context. In this paper we present the development and implementation of an application, which allows to generating three-dimensional models of buildings, directly within a three-dimensional geo-referenced environment. The application offers the user many innovative suggestions, associating the modeling ability, typical of the CAD systems, to the opportunity offered by the geo-referenced systems, to evaluate in real time the impact of the buildings directly on its environment, within which it can be generated and manipulated. The designer is able to explore several alternative solutions, according to formal requirements and style preferences. Three experiments are presented for different urban scenarios.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ascaad2009_ahmad_rafi
id	ascaad2009_ahmad_rafi
authors	Rafi, Ahmad; Ruzaimi Mat Rani and Peter Woods
year	2009
title	Human Perception of Visualization Tools Used for Visual Impact Assessment
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 29-36
summary	This paper discusses the visualization tools and methods used to examine human perception in Visual Impact Assessment (VIA). One of the key conservation areas in Kuala Lumpur was selected in the study to measure the impact of different types of visualization tools. This paper recommends that human perception contributes towards the improvements of the visualization tools for VIA. The study found out that the common visualization tools used were not the most preferable tools among respondents. On the contrary most respondent preferred interactive visualization that offered more visual possibilities leading to a better understanding of landscape design. Apart from this, the study identified that the visual perception between the respondents who have different formal education background have similar concerns on the visualization tools tested to them.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ijac20109201
id	ijac20109201
authors	Ramsgard Thomsen, Mette; Martin Tamke, Jacob Riiber Nielsen
year	2011
title	Generating a scalar logic: producing the "it's a SMALL world" exhibition
source	International Journal of Architectural Computing vol. 9 - no. 2, 115-132
summary	This paper presents the design project “it’s a SMALL world”, an exhibition design developed for the Danish Design Centre in 2009.The project investigates the making of a generative design environment by which multiple design parameters as from program, site or the subsequent digital fabrication and assembly process can be negotiated. In this paper we discuss methods for understanding the emergent interrelationships between encoded parameters, how to manage these and their impact on design.The implementation of the design necessitated a novel design method that allowed to blend the qualities of a generative design approach, that can adapt through recursion gradually to local requirements, with explicit definitions.The project showcases with its new developed manufacturing system for non- standard element how customized digital design and production tools allow for a novel nearness to material and new ways of production and collaboration of architects, engineers and the crafts.
series	journal
last changed	2019/05/24 09:55

_id	ascaad2009_haitham_rashed
id	ascaad2009_haitham_rashed
authors	Rashed, Haitham and Heba Elsharkawy
year	2009
title	Virtual Museum: Towards a new typology of the museum in the future
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 269-279
summary	Architecture is affected by the information technology, one must consider two conditions: that the physical spaces of architecture as we have always known it (enclosure, form and permanence) will without a doubt persevere, and that it will exist alongside the virtual architecture, surfacing in the digital domain of the internet. Museums are now being constructed, navigated, experienced, comprehended, and altered in their virtual states by countless people across global networks. This new architecture of liquidity, flux and mutability is predicated on technological advances and fuelled by basic human desire to probe the unknown. The path that both types of architecture, the real and the virtual, take will be one of convergence. VR seems to be the next logical step in the path laid by CAD, but it will have a more extensive impact, since it not only transforms the way architects design and visualize, but can also be integrated into the final product of architecture itself: such as museums. The main goal of this paper is to emphasize the new typology of museums of the future in which digital technologies support all kinds of museum activities such as gathering, preserving, researching, exhibiting, and educating. Also, to introduce digital technologies for the digital museum such as media and new human interface technologies for novel exhibition styles and data processing technologies for digital archiving of cultural or historical artifacts. The paper highlights the technology used in this new typology of museums; the virtual museum. It also discusses the advantages and the disadvantages of the virtual museum.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ascaad2009_tayeb_sahnoune
id	ascaad2009_tayeb_sahnoune
authors	Sahnoune, Tayeb and Brahim Nuibat
year	2009
title	Digital Design Tools and Case Study Reasoning
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 451-463
summary	This study investigates how the use of digital technology in general, and electronic information and automation, especially during the course of study and preparation of urban and architectural designs on the one hand, and analysis of the impact of these applications and uses of the media automation and information technology at various stages of Physical planning and architectural design of projects, on the other hand. The comparison between modern and traditional methods, to determine the positives and negatives of both sides on the economic (economy, effort, money and time) and technical, which includes (graphic representation: painting, measure, Quality, precision, colours, details and other ....). The answer to whether computer and digital development has invented, added, or nothing of substance to content of architecture and urban planning designs, or has enabled us to solve the urban and architectural problems related to social and cultural aspects. We have in this study, the city of _Boussa_da_ in the south of Algeria as an example, through which presentation and analysis of two types of field projects carried in our architectural office using; media techniques and various programs: (Architectural3.3/Accurender/Art-lantis...) mentioning That, the two projects have been completed and approved, and are now in the process of realisation. The first project represents a residential neighbourhood area of (82.65 ha), through the action plan and land uses called _Plan d_occupation des sols_ in Algeria, No.09, in order to create and prepare the new town for extension, establish administrative and commercial centre, and determine the nature of land use; (equipment, facilities and housing),for a population number estimated (12,264)inhabitants, and projected number of housing estimated at 2409 houses, with a density of 150 inhabitants / ha. The second project is to study the architecture of the 50 houses earmarked for social Tzhmia working group, formed 25 three-room apartment type with(67.00 m 2) and 25 four-room apartment type with(77.00m2). However, The study aims to identify the impact of automated information applications and information technology used at different stages of urban planning and architectural design of these projects under consideration by the comparison between the traditional design table, and electronic design table to determine the pros and cons of each one of these means on the one hand, and stages of concepts and design, On the other, before concluding to how to use the media automation and digital technology, trying to find a point of hugs between the means and tools of Planning and design, through the analysis of the historical path of each of these elements.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ijac20097407
id	ijac20097407
authors	Sass, Lawrence
year	2009
title	Parametric Constructionist Kits: Physical Design and Delivery System for Rapid Prototyping Devices
source	International Journal of Architectural Computing vol. 7 - no. 4, 623-642
summary	In this paper we illustrate a design methodology based on constructionist learning principles with CAD modeling and rapid prototyping. The belief is that a constructionist approach to design development extends design possibilities beyond the visual aspects of rendering and animation to building construction by way of component-based parametric modeling. This is demonstrated by way of construction kits as a proposed system of physical design production, individually and in groups. Results of the system are data sets for model manufacturing, hand assembly and design feedback. The impact of this work is to teach physical modeling as a system of production that will allow a designer hands-on learning of building structure, material mechanics and building component behavior. Also design success is newly defined as a relationship between the visual and physical evaluation; not just the visual. The paper ends with examples of complex design models generated from elements in the construction kit and a physical design grammar used to guide element assembly. Although the examples in this paper satisfy model making for building structures we believe this system can be useful for anyone who needs to construct physical artifacts beyond traditional scales found in rapid prototyping.
series	journal
last changed	2010/09/06 08:02

_id	ascaad2009_bhzad_sidawi
id	ascaad2009_bhzad_sidawi
authors	Sidawi, Bhzad
year	2009
title	The Consideration of Lifelong Owner’s and Property’s Characteristics in Nd Cad System: The case of affordable housing in kingdom of Saudi Arabia
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 191-204
summary	Residential property value is affected by several factors during its useful time. . These factors include people’s lifestyles, traditions and culture, and the way they live and interact with the built environment. The property characteristics such as its location, building quality, adaptability, and energy efficiency would also have an impact on the property value. On the other hand, the nD CAD research that emerged in the late 1990s proposed endless dimensions of CAD modelling that would incorporate the building regulations’ requirements, basic user needs and client requirements. However, there is a need to implement lifelong parameters that would have significant effect on the property value in 3D models during the early stages of design. This can be done through a knowledge base integrated into a 3D model and links the lifelong property’s and the user’s characteristics with the property’s value. A survey was carried out on banks and Real Estate Development Fund (REDF) in the Kingdom of Saudi Arabia to find out the level of impact of lifelong users and property characteristics on the property’s value. The results of the survey showed a number of lifelong property and user driven parameters that may have major impact on the property’s value. The implementation of lifelong parameters in nD CAD models would have a number of benefits. It would provide the decision makers such as banks and investors with a tool to assess the level of impact of possible lifelong factors on the property value and consider alternative schemes. Designers would use it during the early stages of design to produce optimum design solutions that provide an adequate product that is evaluated regarding its lifelong value to the end users. Eventually it would provide a comfortable environment that is tailored to the user’s needs and aspirations, while reserving the property’s lifelong value.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	cf2009_021
id	cf2009_021
authors	Yehuda, Kalay
year	2009
title	The impact of information technology on architectural design in the 21st century
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 21-34
summary	Architecture uses technology to achieve certain functional, cultural, social, economic, and other goals. In turn, technology transforms the discipline. Information technologies promise to change design processes, practices, and products. The first uses of computing in the service of architecture have been rather timid, mimicking older practices. This is changing rapidly: new design and evaluation tools allow architects to imagine new building forms, more responsive (and environmentally more responsible) buildings, even radically new types of environments that blend physical with virtual space. Understanding and shaping this transformation are the basis of architectural design research and education in the 21st century.
keywords	Architectural design, built environment, computer aided design, design practice
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	cf2009_410
id	cf2009_410
authors	Abdelhameed, Wael
year	2009
title	Reciprocal relationship of conceptualization and design problem definition: A proposed approach for an architectural design studio
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 410-422
summary	This research paper proposes an approach to be applied in the design studio. The proposed approach highlights the reciprocal relationship between concept articulation and design problem definition in a design method that exposes different design activities related to this relationship. The design method was applied in a design studio of an intermediate level. The study reports the analysis of student designs in terms of the deign method employed. Moreover, a survey was carried out in order to measure the responses of students and instructors regarding the design method and its approach. The main structure of the design method proposed can be described as follows: although the relationship of concept articulation and design-problem definition are reciprocal, the influence of one direction can be distinguished more than of the other direction on different design activities. The research using qualitative and quantitative methodologies analyzes the results and outputs of the theoretical investigations, the practical application in the design studio, and the questionnaire responses through different methodological tools.
keywords	Conceptual design, design method, architectural design studio
series	CAAD Futures
email
last changed	2009/06/08 20:53

For more results click below: