Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 297

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2009_hussein_albotany
id	ascaad2009_hussein_albotany
authors	Albotany, Hussein S.
year	2009
title	Development of Digital City Models Using 3d GIS
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 409-418
summary	“Digital city” is a copy of an actual city in the virtual space. It is expected to play an important role in urban planning, disaster simulation etc. Recent advanced remote sensing technologies, which are capable to quickly provide detailed information of city areas, ease the construction of 3D city models. Urbanization has evinced interest from a wide section of the society including experts, amateurs and novices. With the development and infrastructure initiatives mostly around the urban centers, the impacts of urbanization and sprawl would be on the environment and the natural resources. The research introduces an application of 3D GIS on Manama City.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ascaad2009_michael_ambrose
id	ascaad2009_michael_ambrose
authors	Ambrose, Michael A.
year	2009
title	Spatial and Temporal Sequence: Film, animation and design theory - toward a constructed morphology
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 165-176
summary	This paper presents an investigation of film, space, form and motion to expose issues of spatial perception. The objective is to use a brief moment of constructed moving imagery (a film scene) as the vehicle to develop a spatial/temporal sequence. The design research focuses on an examination of the procedure or process constructed by the director/cinematographer. The changing position of the camera continually changes the relationship of the frame to the viewed context. The project asks the student to interpret the spatial and temporal transformation, through the continual oscillation between foreground and background, in an effort to unravel the pretext of the singular point of view to reveal the intention of the filmmaker. The project discussed here focuses on a relationship between the projection of space in architectural representation and the production of space through complex geometries relative to temporal discontinuities and the way in which they agitate and alter one another. Drawing topological relationships between of the paths, or trajectories of movement, within a proposed scene of a film is the vehicle for investigation in this project. An event or configuration complete in itself, but forming part of the larger collection, is modelled and transformed to suggest various structural and temporal definitions with respect to spatial portrayal through the composition of time and the cinematic frame. In particular, spatial animation of a sequence of framed condition was to be explored in the development of a spatial episode.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	sigradi2009_864
id	sigradi2009_864
authors	Arruda, Anna Karla Trajano de; Arivaldo Leão de Amorim
year	2009
title	Preservação e Gestão de Sítios Históricos: a contribuição do Heritage Information System [Preservation and Management of Cultural Heritage: the contribuition Heritage Information System]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	The present article aims to discuss the application of the digital technologies in the preservation and management of cultural heritage development. The GIS is used by the international agencies heritage like UNESCO. The GIS applications that are largely applied in built cultural heritage are internationally known as Heritage Information System – HIS. In HIS, the space configuration of the historical sites is represented by a map or for a DTM, with the quantitative and qualitative attributes, 3D geometric models and hypermedia products. Their visualization are enriched by techniques of virtual reality and published in the web.
keywords	Preservação e Gestão; Patrimônio Cultural; Documentação Arquitetônica; Geographic Information System; Banco de dados; Heritage Information System
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2009_073
id	caadria2009_073
authors	Dave, Bharat; Jules Moloney
year	2009
title	Augmenting Time and Space in Design Inquiries
doi	https://doi.org/10.52842/conf.caadria.2009.523
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 523-532
summary	Our research revolves around developing applications of augmented reality technologies to support changing temporal contexts in architectural design. In order to ground this research in contemporary professional culture, we first undertook a structured data gathering exercise, analysis of which will inform development of new AR technologies and tools to support temporal visualisation of architectural designs. This paper reports on the first phase of this project in which we undertook extended conversations and documentation of 22 design offices that represent practices of varying sizes and competencies. The intention of this data collection exercise was to map out spectrum of design issues and representations that specifically revolve around changing temporal or spatial contexts in design. This paper reports collection and preliminary analysis of data intended for developing specifications of future AR applications.
keywords	augmented reality; design representations; spatio-temporal design; contextual design
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ijac20097201
id	ijac20097201
authors	Hudson, Roly
year	2009
title	Parametric Development of Problem Descriptions
source	International Journal of Architectural Computing vol. 7 - no. 2, 199-216
summary	This paper addresses the development of parametric models in contemporary architectural practice. A parametric model can be regarded as a representation of a solution space and in order to structure this, a description of the problem is required. Architectural design tasks are typically ill structured, the goals may not be defined and the means unknown. Moving from an incomplete problem description to a functional parametric model is a difficult task. In this paper the aim is to demonstrate that through a combination of knowledge acquisition and capture a parametric model can develop from an incomplete problem description. This demonstration draws on existing strands of design theory which are then used to outline a theoretical framework. This framework is then used to examine a case study of a live project and practical examples of the described theory in action are given. The practical observations are the result of a case study involving the author as a participant and observer working with Populous to develop a cladding geometry solution for Lansdowne Road Stadium in Dublin (now know as the AVIVA STADIUM).
series	journal
last changed	2009/08/11 08:39

_id	ascaad2009_emmanuel_ruffo
id	ascaad2009_emmanuel_ruffo
authors	Ruffo, Emmanuel
year	2009
title	Programming As an Evolutionary Concept for Architectural Education: From natural systems to computer science materialization to emergent and evolutionary embedded architectural design
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 47-59
summary	Logic and evolution in ontogenetic processes for Architectural design was the title for a summer program taught at the Escuela de Arquitectura of the Universidad Anahuac from June to July 2008 in the State of Mexico, Mexico. Every single result in architectural design follows logical steps enclosed in the design processes. These logical processes evolve through space-time sequences in order to generate a diversity of possible solutions. In Biology an ontogenetic process refers to the development of an individual organism, anatomical or behavioral feature from the earliest stage to maturity. Following this development criteria students were encouraged to understand the main logics of natural and physical systems through the aid of computer programming. These logics must be understood as tridimensional geometries digitally generated. Right from the beginning all processes generated during the explorations and investigations had to be visualized as integral design performances. The integral design system must embedded structure, function, form and material capacities through the aid of computer programming, digital fabrication technologies and material assembling techniques. It is important to note that final prototypes had to demonstrate the diversity of capacities of the whole system in order to automate the components in evolution.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ascaad2009_regina_ruschel
id	ascaad2009_regina_ruschel
authors	Ruschel, Regina C.; Ana Lúcia C.N. Harris; Silvia A.M.G. Pina; Ana Maria M.G. Monteiro; Núbia Bernardi; Daniel C. Moreira; Ana Regina M. Cuperschmid and Autímio B. Guimarães Filho
year	2009
title	Beyond Traditional CAAD: E-Learning supporting design thinking
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 71-87
summary	A study based on a post-occupancy-evaluation (POE), conducted in housing developments in the region of Campinas, Brazil, evaluated quality of life and sustainability indicators. These indicators were then related to site planning design guideline for low-income public housing projects that considered recommendations for integrated community and security, street and path system and parking, public and private open space and landscaping. Since this work is part of a broader study, which aims to develop evaluation tools, the proposed design guidelines were used by students in a graduate class, in order to verify its effectiveness. Bloom’s Taxonomy was used to determine educational goals for design thinking in this class. First design thinking was instigated based on students’ prior knowledge of life quality and sustainability indicators for housing design. Comprehension of proposed design guidelines was stimulated by the reading and discussion of related literature, paraphrasing or extension of proposed design guidelines and respective illustration with reference images. An existing low-income housing development, with award winning design, was selected and an evaluation of its conformance to proposed design guidelines was conducted comparing site or design images to reference images. This evaluation subsidized a design exercise for the selected housing development. The class was offered as a partially distance course with an agenda including: tutorials, theoretical classes, seminars and conceptual discussions. A new Brazilian open source e-learning environment was experimented and critiqued. Beyond traditional CAAD tools others such as wiki, blog, polls, chat, conferencing, web authoring and visit broadcasting supported collaborative learning and design. Results indicate the viability of design teaching in distance education courses for competent designers; however the experience shows the need for innovation in synchronous communication and visualization tools specific for architectural design users. Students evaluation of selected housing development and final projects indicate that the proposed guidelines for low-income public housing projects successfully supports the decision making process in order to incorporate quality of life and sustainability indicators in design. The experience presents a model of design education which incorporates technology integrated to human and environmental dimensions.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	caadria2009_109
id	caadria2009_109
authors	Wang, Chung-yang
year	2009
title	Statics and Dynamics in The Process of CAD/CAM Fabrication
doi	https://doi.org/10.52842/conf.caadria.2009.245
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 245-254
summary	Through the progress of digital media, dynamic concepts contribute to vivid forms. Nevertheless, these forms still present static space, which cannot reflect the designer’s dynamic concept, a shape that changes over time. This is a setback for design and fabrication. Hence many researchers turn to designing dynamic architecture. However, the current development restricted by technical threshold is prone to solve the variation of functions instead of aesthetic-oriented changeable form. It is obvious that the difference between “statics” and “dynamics” becomes a watershed of aesthetics and functions. This research attempts to eliminate the above-mentioned barrier and to suggest a new CAD/CAM fabrication procedure based on aesthetics and reveal key tectonic factors that affect dynamic architecture.
keywords	CAD/CAM: Statics/Dynamics; Tectonics; Fabrications
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	ee30
id	ee30
authors	Abdelmohsen, Sherif; El-Khouly, Tamer
year	2009
title	Representing Reflective Practice in a Remote Design Collaboration Process
source	Digital proceedings of the 3rd Conference of International Association of Societies of Design Research (IASDR 2009), COEX, Seoul, Korea, pp. 1317 – 1326.
summary	This paper addresses a new method to describe the remote collaborative design process from the perspective of reflective practice. We aim at understanding the mutual effect between internal and external structures in remote collaborative design. According to the cognitive coding scheme of Suwa et al., we encoded the process into a set of indices—new, continual and revisited—that describe each primitive design move. In a case study which involved the authors as design collaborators, we identified the degree of dependency among these moves and developed a 3D graphical representation to account for reflective practice between us as collaborators. In this representation, we re-interpreted our collaborative process through three main axes: axis of idea exchange as lateral component, axis of idea development as vertical component, and axis of dependency as depth component. We believe this representation can be used to re-interpret the collaboration process among geographically dispersed design team members.
keywords	Collaborative design, reflective practice, collective reflection-in-action, cognitive actions, design moves, dependency relationships, remote collaboration
series	other
type	normal paper
email
last changed	2010/01/30 07:26

_id	ascaad2009_a_al_attili
id	ascaad2009_a_al_attili
authors	Al-Attili, A. and M. Androulaki
year	2009
title	Architectural Abstraction and Representation: The embodied familiarity of digital space
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 305-321
summary	This paper argues that familiarity is the tool that enables the understanding of space abstraction and representation. Familiarity in this context is independent from embodied interaction, and is crudely based on the connection between the various similar images of space; in this particular case, virtual space. Our investigation into the nature of human interaction with space, its abstraction and its representation is based on the critical contrast between the outcomes of interaction with two virtual versions of a physical reality; the first version is a non-linear interactive graphical abstraction of the space where no assertions or indicators are given as to whether or not there is a relationship between the abstraction and its physical reality, whereas the second is a none-linear interactive 3D virtual environment clearly representing the physical space in question. The paper utilises qualitative methods of investigation in order to gain an insight into human embodied experience in space, its abstraction and representation.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ascaad2014_023
id	ascaad2014_023
authors	Al-Maiyah, Sura and Hisham Elkadi
year	2014
title	Assessing the Use of Advanced Daylight Simulation Modelling Tools in Enhancing the Student Learning Experience
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 303-313
summary	In architecture schools, where the ‘studio culture’ lies at the heart of students’ learning, taught courses, particularly technology ones, are often seen as secondary or supplementary units. Successful delivery of such courses, where students can act effectively, be motivated and engaged, is a rather demanding task requiring careful planning and the use of various teaching styles. A recent challenge that faces architecture education today, and subsequently influences the way technology courses are being designed, is the growing trend in practice towards environmentally responsive design and the need for graduates with new skills in sustainable construction and urban ecology (HEFCE’s consultation document, 2005). This article presents the role of innovative simulation modelling tools in the enhancement of the student learning experience and professional development. Reference is made to a teaching practice that has recently been applied at Portsmouth School of Architecture in the United Kingdom and piloted at Deakin University in Australia. The work focuses on the structure and delivery of one of the two main technology units in the second year architecture programme that underwent two main phases of revision during the academic years 2009/10 and 2010/11. The article examines the inclusion of advanced daylight simulation modelling tools in the unit programme, and measures the effectiveness of enhancing its delivery as a key component of the curriculum on the student learning experience. A main objective of the work was to explain whether or not the introduction of a simulation modelling component, and the later improvement of its integration with the course programme and assessment, has contributed to a better learning experience and level of engagement. Student feedback and the grade distribution pattern over the last three academic years were collected and analyzed. The analysis of student feedback on the revised modelling component showed a positive influence on the learning experience and level of satisfaction and engagement. An improvement in student performance was also recorded over the last two academic years and following the implementation of new assessment design.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ascaad2009_hafsa_al_omari
id	ascaad2009_hafsa_al_omari
authors	Al-Omari, Hafsa and Luma Al Dabbagh
year	2009
title	Form in Islamic Architecture: A new vision by using 3D Studio Max program
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 433-450
summary	Architecture is a record of human civilization, values, principles and concepts. Form (elements and relations) is one of the visual features of identity and self on one hand and expressive features of place and time (scientific and technical development ) on the other hand. Creating new forms from historical forms is considered one of the greatest challenges that face the architect. Research problem centered on the importance of form in Islamic architecture, and the possibility of investment a new scientific method ( 3D Studio Max program) in creating contemporary architecture using historical and traditional Islamic forms. Research divides to three sections. The first is a theoretical framework that determines the importance and the generation and the potentiality of form in Islamic architecture. The second studies the traditional methods that has been used to create a contemporary Arab-Islamic architecture using historical references, then introduce 3D Studio Max program as alternative new scientific method to traditional methods contribute to create a new vision of contemporary Arab Islamic architecture. The conclusions identify the importance of form in the Islamic civilization and showed that the generation of form affected by its potentiality. Research opens new methods that have not been studied previously in creating contemporary Islamic architecture by using the modifier stack in 3D Studio Max program.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	sigradi2021_50
id	sigradi2021_50
authors	Albuquerque, Dilson and Andrade, Max
year	2021
title	The Impacts of Collaboration and Cordination of Architectural and Engineering Projects Developed with BIM in Reducing Design Interferences
source	Gomez, P and Braida, F (eds.), Designing Possibilities - Proceedings of the XXV International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2021), Online, 8 - 12 November 2021, pp. 783–794
summary	This paper addresses the importance and development of cultural transformations involving the design process in architecture and the advent of Building Information Modeling (BIM) in civil construction activities and how its implementation in a coordinated, collaborative and interoperable way contributes to a diagnosis of Clash Detection between diferentes design projects, before building construction, saving excessive costs and rework. Taking as its main reference the BIM Maturity Matrix of Succar (2009), the proposed BIM Project Integration Maturity Matrix contributes to the awareness of bringing designers and builders closer to design activities, to encourage the integration of design processes involving the building, to consolidate an environment of ease of communication between participants, the organization of documentation and, above all, prioritize the compatibility between projects to avoid conflicts, excess costs and rework, resulting in a higher quality of the final project.
keywords	Coordenaçao de projetos, detecçao de interferencias, Building Information Modeling, matriz de avaliaçao, projeto integrado
series	SIGraDi
email
last changed	2022/05/23 12:11

_id	caadria2009_137
id	caadria2009_137
authors	Baerlecken, Daniel; Judith Reitz
year	2009
title	Combinatorial Productivity
doi	https://doi.org/10.52842/conf.caadria.2009.761
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 761-770
summary	The paper investigates knotting techniques as a method for generating wall systems. The essential matter of the paper is to demonstrate the potential of knotted, algorithmic architecture through different research studies, which share the knotting of linear elements as a common methodology for design development. Combinatorial Productivity implies that by combining linear elements hidden properties of a system emerge and thereby the system becomes productive.
keywords	Generative Design; Design methodology; Parametric Form Generation; Knot Theory; Scripting
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ijac20097306
id	ijac20097306
authors	Balakrishnan, Bimal; Kalisperis, Loukas N.
year	2009
title	Design Visualization:A Media Effects Approach
source	International Journal of Architectural Computing vol. 7 - no. 3, 415-427
summary	This paper proposes an integrative approach in the evaluative phase of the design process, incorporating concepts, methodologies and measurement strategies that are well established in media psychology. The paper suggests a variable-centered approach for conceptualizing visualization technologies and to evaluate their potential to simulate architectural experience. Psychophysiological measures are introduced to capture the affective component of the architectural experience facilitated by visualization tools such as virtual reality. These are important in order to empirically evaluate the experiential aspects of an architectural space through visualization. Ideas are illustrated with examples drawn from prior and ongoing research collaboration between an architectural visualization lab and a media effects research lab.
series	journal
last changed	2009/10/20 08:02

_id	ascaad2009_mustapha_ben_hamouche
id	ascaad2009_mustapha_ben_hamouche
authors	Ben-Hamouche, Mustapha
year	2009
title	Gis in Architectural Education: Design as a place-making process
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 393-407
summary	Responsiveness to site conditions and environment is one of the axioms of architectural design. However, most students’ design is made in a non-geo-coordinated cyberspace through CAAD design and thus leading to “flying” proposals” that are not attached to the context. GIS teaches students in architecture to initially refer to real locations as the space in which they design is geo-coordinated and provides the wider context of the project. Along the design process, the project surroundings from macro scale; that is the globe, to the micro-scale that is reflected in the existing buildings, the road network and the topography are constantly present. At the end stage, the project is seen not as a free standing building but rather as an integral part in a real place on Earth. The 3-D urban visualization gives the possibility of evaluating the degree of success of place-making and the fitness of the project to its context. The aim of the paper is to present how a GIS course can support CAAD and improve the architectural design process as well as the quality of the design output towards a contextual architecture. The paper is based on the experience of the author who is architects and urban planner, in teaching design studios and Urban Planning based on GIS as an elective course to graduating students in architecture at the University of Bahrain. It presents an alternative method that is called Permanent Presence of the Real World PPRW.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ijac20097408
id	ijac20097408
authors	Biloria, Nimish; Valentina Sumini
year	2009
title	Performative Building Skin Systems: A Morphogenomic Approach Towards Developing Real-Time Adaptive Building Skin Systems
source	International Journal of Architectural Computing vol. 7 - no. 4, 643-676
summary	Morphogenomics, a relatively new research area, involves understanding the role played by information regulation in the emergence of diverse natural and artificially generated morphologies. Performative building skin systems as a bottom-up parametric formation of context aware interdependent, ubiquitously communicating components leading to the development of continually performative systems is one of the multi-scalar derivations of the aforementioned Morphogenomic understanding. The agenda of adaptations for these building skins specifically corresponds to three domains of adaptation: structural, behavioral and physiological adaptations resulting in kinetic adaptability, energy generation, conservation, transport and usage principles as well as material property based changes per component. The developed skins adapt in real time via operating upon ubiquitous communication and data-regulation protocols for sensing and processing contextual information. Computational processes and information technology based tools and techniques such as parametric design, real-time simulation using game design software, environmental information mapping, sensing and actuating systems coupled with inbuilt control systems as well as manufacturing physical models in collaboration with praxis form a vital part of these skin systems. These experiments and analysis based on developing intrinsic inter-dependencies between contextual data, structure and material logistics thus lay the foundation for a new era of continually performing, self powering, real-time adaptive intelligent building skin systems.
series	journal
last changed	2010/09/06 08:02

_id	caadria2009_017
id	caadria2009_017
authors	Bruton, Dean
year	2009
title	On Distributed Network Rendering Systems
doi	https://doi.org/10.52842/conf.caadria.2009.065
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 65-74
summary	This paper reports an investigation of the establishment and performance of a distributed computer rendering system for advanced computer graphics production within a centralized university information technology environment. It explores the proposal that the use of distributed computer rendering systems in industry and universities offers synergies for university-industry collaborative agreements. Claims that cluster computing and rendering systems are of benefit for computer graphics productions are to be tested within a standard higher education environment. A small scale distributed computer rendering system was set up to investigate the development of the optimum use of intranet and internet systems for computer generated feature film production and architectural visualisation. The work entailed using monitoring, comparative performance analysis and interviews with relevant stakeholders. The research provides important information for practitioners and the general public and heralds the initiation of a Centre for Visualization and Animation research within the School of Architecture, Landscape Architecture and Urban Design, University of Adelaide.
keywords	Render farm, processing, computer graphics, animation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ijac202119302
id	ijac202119302
authors	BuHamdan, Samer; Alwisy, Aladdin; Bouferguene, Ahmed
year	2021
title	Generative systems in the architecture, engineering and construction industry: A systematic review and analysis
source	International Journal of Architectural Computing 2021, Vol. 19 - no. 3, 226–249
summary	Researchers have been extensively exploring the employment of generative systems to support design practices in the architecture, engineering and construction industry since the 1970s. More than half a century passed since the first architecture, engineering and construction industry’s generative systems were developed; researchers have achieved remarkable leaps backed by advances in computing power and algorithms’ capacity. In this article, we present a systematic analysis of the literature published between 2009 and 2019 on the utilization of generative systems in the design practices of the architecture, engineering and construction industry. The present research studies present trends, collaborations and applications of generative systems in the architecture, engineering and construction industry in order to identify existing shortcomings and potential advancements that balance the need for theory development and practical application. It provides insightful observations that are translated into meaningful recommendations for future research necessary to progress the incorporation of generative systems into the design practices of the architecture, engineering and construction industry.
keywords	Generative systems, architecture, engineering and construction industry, performative design, generative design, systematic literature review, future directions
series	journal
email
last changed	2024/04/17 14:29

For more results click below: