Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 564

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2009_152
id	caadria2009_152
authors	Henriques, Gonçalo Castro
year	2009
title	Crafting New Artefacts
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 205-214
doi	https://doi.org/10.52842/conf.caadria.2009.205
summary	The craft of complex artefacts, questioning technological changes and reflecting social and cultural transformation used to be a common attitude in traditional artisans of the pre industrialized society. Traditional craftsman developed special knowledge and skills, implementing their own tools and techniques. After the industrial revolution, the main focus shifted to mass production, and the personalization of artefacts became labour intensive and more expensive. Simultaneously, with technical specialization and the fragmentation of knowledge, the designer’s, builder’s and manufacturer’s approach became more segregated. Currently, information technologies offer new opportunities to the craft of complex objects. The integration of digital process from conception to fabrication, can transform this situation, and as a result personalization is more affordable. Nevertheless, the introduction of these new techniques or tools is lacking a poetic synthesis for the use of technology, and the social and cultural implications that may result of this use. A competition for a public installation was an opportunity to use digital tools to conceive, manufacture and construct a complex structure with a small budget that would be impossible to attain using only traditional tools. At the same time, this project - genetic landscape- could be seen as a metaphor, alluding to the technological interference on the process of creating a new life, or a second nature.
keywords	expanding traditional tools; digital craft; complex geometry built-case
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	ecaade2009_126
id	ecaade2009_126
authors	Kocatürk, Tuba; Codinhoto, Ricardo
year	2009
title	Dynamic Coordination of Distributed Intelligence in Design
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 61-68
doi	https://doi.org/10.52842/conf.ecaade.2009.061
wos	WOS:000334282200006
summary	Recent introduction and coupling of digitally mediated design and production environments facilitated a radical deviation from the traditional ways of using representations, knowledge assets, organizational forms and standards. Consequently, we observe an abundance of the traditional views of design and the emergence of new cognitive models/constructs based on the emerging relationships between the designer, the design object (artefact), the design tools/systems and the organizational network of the various actors and their activities in building design & production. The paper reports on the initial findings of an ongoing research which aims to uncover the ways in which digitalization and digital tools have recently been adopted to the work practices of multidisciplinary firms and the evolving socio-technical networks and organizational infrastructures within architectural practice.
keywords	Distributed intelligence, coordination of digital design, socio-technical change, building information modelling, parametric design
series	eCAADe
email
last changed	2022/06/07 07:51

_id	sigradi2009_867
id	sigradi2009_867
authors	Shadkhou, Shaghayegh; Jean-Claude Bignon
year	2009
title	Architectural morphogenesis - Towards a new description of architectural form
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	Introduction of computational techniques and numeric potentials to the process of architectural design has significantly challenged the process of form generation. Architectural morphogenesis denotes the generation of architectural form via its geometric adaptation to materiality and constructability. This work is presented as a part of a research activity which investigates integration of construction information as well as material properties to geometric description of the architectural form. Different aspects of architectural form are explored through analysis of certain examples. Basic issues of the research were examined through a one week workshop experiment with architecture students
keywords	Computational form generation; materialization and constructability; geometric adaptation; geometric model; CAD/CAM technologies
series	SIGRADI
email
last changed	2016/03/10 10:00

_id	acadia17_102
id	acadia17_102
authors	Aparicio, German
year	2017
title	Data-Insight-Driven Project Delivery: Approach to Accelerated Project Delivery Using Data Analytics, Data Mining and Data Visualization
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 102-109
doi	https://doi.org/10.52842/conf.acadia.2017.102
summary	Today, 98% of megaprojects face cost overruns or delays. The average cost increase is 80% and the average slippage is 20 months behind schedule (McKinsey 2015). It is becoming increasingly challenging to efficiently support the scale, complexity and ambition of these projects. Simultaneously, project data is being captured at growing rates. We continue to capture more data on a project than ever before. Total data captured back in 2009 in the construction industry reached over 51 petabytes, or 51 million gigabytes (Mckinsey 2016). It is becoming increasingly necessary to develop new ways to leverage our project data to better manage the complexity on our projects and allow the many stakeholders to make better more informed decisions. This paper focuses on utilizing advances in data mining, data analytics and data visualization as means to extract project information from massive datasets in a timely fashion to assist in making key informed decisions for project delivery. As part of this paper, we present an innovative new use of these technologies as applied to a large-scale infrastructural megaproject, to deliver a set of over 4,000 construction documents in a six-month period that has the potential to dramatically transform our industry and the way we deliver projects in the future. This paper describes a framework used to measure production performance as part of any project’s set of project controls for accelerated project delivery.
keywords	design methods; information processing; data mining; big data; data visualization
series	ACADIA
email
last changed	2022/06/07 07:55

_id	sigradi2009_864
id	sigradi2009_864
authors	Arruda, Anna Karla Trajano de; Arivaldo Leão de Amorim
year	2009
title	Preservação e Gestão de Sítios Históricos: a contribuição do Heritage Information System [Preservation and Management of Cultural Heritage: the contribuition Heritage Information System]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	The present article aims to discuss the application of the digital technologies in the preservation and management of cultural heritage development. The GIS is used by the international agencies heritage like UNESCO. The GIS applications that are largely applied in built cultural heritage are internationally known as Heritage Information System – HIS. In HIS, the space configuration of the historical sites is represented by a map or for a DTM, with the quantitative and qualitative attributes, 3D geometric models and hypermedia products. Their visualization are enriched by techniques of virtual reality and published in the web.
keywords	Preservação e Gestão; Patrimônio Cultural; Documentação Arquitetônica; Geographic Information System; Banco de dados; Heritage Information System
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cf2009_119
id	cf2009_119
authors	Boeykens, Stefan; Neuckermans, Herman
year	2009
title	Architectural design analysis, historical reconstruction and structured archival using 3D models: Techniques, methodology and long term preservation of digital models
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 119-132
summary	With the increased usage of 3D modeling, visualization, simulation and Building Information Modeling, architects produce 3D models, both for new designs and for historic reconstructions. However, these models are seldom shared to transfer structured information about the project. Even if they are exchanged, they are often not usable outside of their original design application. Additionally, digital archives with architectural content can not easily provide structured information about these 3D models, limiting their usefulness. This article discusses an approach to provide better structured models, using a combination of a sound methodology, the application of open file formats and additional metadata creation.
keywords	CAAD, design analysis, reconstruction, archival, preservation
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2009_017
id	caadria2009_017
authors	Bruton, Dean
year	2009
title	On Distributed Network Rendering Systems
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 65-74
doi	https://doi.org/10.52842/conf.caadria.2009.065
summary	This paper reports an investigation of the establishment and performance of a distributed computer rendering system for advanced computer graphics production within a centralized university information technology environment. It explores the proposal that the use of distributed computer rendering systems in industry and universities offers synergies for university-industry collaborative agreements. Claims that cluster computing and rendering systems are of benefit for computer graphics productions are to be tested within a standard higher education environment. A small scale distributed computer rendering system was set up to investigate the development of the optimum use of intranet and internet systems for computer generated feature film production and architectural visualisation. The work entailed using monitoring, comparative performance analysis and interviews with relevant stakeholders. The research provides important information for practitioners and the general public and heralds the initiation of a Centre for Visualization and Animation research within the School of Architecture, Landscape Architecture and Urban Design, University of Adelaide.
keywords	Render farm, processing, computer graphics, animation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2009_773
id	sigradi2009_773
authors	Carniel, Denize Regina; José Luis Farinatti Aymone
year	2009
title	Desenvolvimento virtual e visualização de produtos a partir de banco de dados e modelagem 3D [Virtual development and product visualization with database and 3D modeling ]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This article presents a methodology for product virtual development using a developed database application and virtual reality technology VRML (Virtual Reality Modeling Language) for final product visualization. To do that, information technology and communication in industry, virtual reality and computational resources for concept and prototyping are investigated. An example of product assembly is presented to illustrate the methodology proposed.
keywords	Information Technology and Communication; Virtual Prototyping; Virtual Reality; VRML; Database
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	caadria2009_024
id	caadria2009_024
authors	Chang, Teng-Wen; Ching-Jung Lin and Yi-Yen Wang
year	2009
title	Exploring Intended Implicate Solution
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 567-576
doi	https://doi.org/10.52842/conf.caadria.2009.567
summary	Design is an iterative exploration process that will invoke many fragmented information with continuous iteration. While fragmented, implicit information lay among these fragmented pieces has shown more potential to achieve some goals that we might skip during the decisionmaking. These potential design goals named implicit intended solution are the problem spaces we want to explore in this research. Therefore, the continuous thinking/operation process cross these fragmented design decision might show some insights for discovering implicit intended solutions. This is a two-fold problem, without exploration and its continuous iteration characteristics, these solutions might not even be found or possible found. Therefore, in this paper we have conducted a research based on visualizing these implicit intended solutions as well the exploration process for finding them.
keywords	Design diagrams; time-based media; visualization
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	cf2011_p135
id	cf2011_p135
authors	Chen Rui, Irene; Schnabel Marc Aurel
year	2011
title	Multi-touch - the future of design interaction
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 557-572.
summary	The next major revolution for design is to bring the natural user interaction into design activities. Graphical User Interfaces (GUI) brought a new approach that was more effective compared to their conventional predecessors. In recent years, Natural User Interfaces (NUI) have advanced user experiences and multi-touch and gesture technologies provide new opportunities for a variety of potential uses in design. Much attention has been paid to leverage in the design of interactive interfaces. The mouse input and desktop screen metaphors limit the information sharing for multiple users and also delayed the direct interaction for communication between each other. This paper proposes the innovative method by integrating game engine ‘Unity3D’ with multi-touch tangible interfaces. Unity3D provides a game development tool as part of its application package that has been designed to let users to focus on creating new games. However, it does not limit the usage of area to design additional game scenarios since the benefits of Unity3D is allowing users to build 3D environments with its customizable and easy to use editor, graphical pipelines to openGL (http://unity3d.com/, 2010 ). It creates Virtual Reality (VR) environments which can simulates places in the real world, as well as the virtual environments helping architects and designers to vividly represent their design concepts through 3D visualizations, and interactive media installations in a detailed multi-sensory experience. Stereoscopic displays advanced their spatial ability while solving issues to design e.g. urban spaces. The paper presents how a multi-touch tabletop can be used for these design collaboration and communication tasks. By using natural gestures, designers can now communicate and share their ideas by manipulating the same reference simultaneously using their own input simultaneously. Further studies showed that 3Dl forms are perceived and understood more readily through haptic and proprioceptive perception of tangible representations than through visual representation alone (Gillet et al, 2005). Based on the authors’ framework presented at the last CAADFutures, the benefits of integrating 3D visualization and tactile sensory can be illustrated in this platform (Chen and Wang, 2009), For instance, more than one designer can manipulate the 3D geometry objects on tabletop directly and can communicate successfully their ideas freely without having to waiting for the next person response. It made the work more effective which increases the overall efficiency. Designers can also collect the real-time data by any change they make instantly. The possibilities of Uniy3D make designing very flexible and fun, it is deeply engaging and expressive. Furthermore, the unity3D is revolutionizing the game development industry, its breakthrough development platform for creating highly interactive 3D content on the web (http://unity3d.com/ , 2010) or similar to the interface of modern multimedia devices such as the iPhone, therefore it allows the designers to work remotely in a collaborative way to integrate the design process by using the individual mobile devices while interacting design in a common platform. In design activities, people create an external representation of a domain, often of their own ideas and understanding. This platform helps learners to make their ideas concrete and explicit, and once externalized, subsequently they reflect upon their work how well it sits the real situation. The paper demonstrates how this tabletop innovatively replaces the typical desktop metaphor. In summary, the paper addresses two major issues through samples of collaborative design: firstly presenting aspects of learners’ interactions with physical objects, whereby tangible interfaces enables them constructing expressive representations passively (Marshall, 2007), while focussing on other tasks; and secondly showing how this novel design tool allows designers to actively create constructions that might not be possible with conventional media.
keywords	Multi-touch tabletop, Tangible User Interface
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2009_774
id	sigradi2009_774
authors	de Souza, Raphael Argento; André Soares Monat
year	2009
title	Visualização da Informação em meio telejornalístico: Uma abordagem sob a ótica do design [Information Visualization in the news television: An approach under the design sight]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This article proposes a classification, under the Visualization Information point of view, of infographics broadcasted in the brazilian news television. To achieve this purpose these so called motion graphics were analised under the basis formed by three main authors: Tufte (1997), Bertin (1977) and Spence (2007), whose theories are in this article compared to the digital means of the motion graphics. With these theoretical foundation and the analisys of two hundred motion graphics broadcasted in the brazilian news television, we achieved a classification which covers every type of these motion graphics, hoping it becomes a basis for the study of these projects.
keywords	Design; information visualization; television infographics, motion graphics; information design
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	ecaade2009_145
id	ecaade2009_145
authors	Gün, Onur Yüce
year	2009
title	Value through Precision, Beyond the Realms
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 377-384
doi	https://doi.org/10.52842/conf.ecaade.2009.377
wos	WOS:000334282200045
summary	Today we portray designs with analytical systems and systems with the emerging terminology of computational design. Generative, intelligent, digital, parametric, associative, biomimetic designs sound valuable, whereas the integrity remains questionable. The tool, enabling designer to play with forms, patterns, models is neither granting him the knowledge nor teaching him the appropriate technique. Are we really able to digest and master all the information we’re subject to, to be used in our designs? Or do we have much to learn about the investigations of the renaissance men to reach to a level of proficiency?
keywords	Computation, design, precision, digital, scripting, CAD, data, scripting, visualization, optimization, rationalization
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ecaade2009_179
id	ecaade2009_179
authors	Halatsch, Jan; Kunze, Antje; Schmitt, Gerhard
year	2009
title	Value Lab: a Collaborative Environment for the Planning of Future Cities
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 507-514
doi	https://doi.org/10.52842/conf.ecaade.2009.507
wos	WOS:000334282200061
summary	This paper describes how the Value Lab is a) developed and b) used in education, research and workshops for (1) Interactive urban design and scenario planning that includes methods to support concurrent collaborative urban design over distances, and scenario planning based on defined case studies; (2) Visualization techniques for the detection and prediction of changes in urban environments; (3) Knowledge transfer to synthesize, interact with and communicate essential knowledge and findings from an array of disciplines for decision making, education, training, demonstration, and public discussions.
keywords	Urban planning, information architecture, multi-touch displays, simulation, city modeling
series	eCAADe
email
last changed	2022/06/07 07:50

_id	caadria2009_191
id	caadria2009_191
authors	Kim, Mi Yun; Jin Won Choi
year	2009
title	Classifying and Utilizing The Geo-Spatial Information in Smart City
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 327-335
doi	https://doi.org/10.52842/conf.caadria.2009.327
summary	It has been difficult to locate necessary information quickly in a complicated geo-spatial information network. Textual and numerical information is disadvantageous in that viewers may not have cognitive power and thus do not understand it properly. Besides, it is thought that a particular means is needed to obtain and to understand the information that we need in a given space. Therefore, this study posits that the geospatial information is complex in the construction of future oriented cities, and a new classification system is required for more effective information visualization. This paper also suggests a classification system of urban geo-spatial information and its possible applications as a way to reflect city dwellers’ opinion in city planning.
keywords	Urban information classification; utilization; geo-spatial information; visualization; urban map
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2009_103
id	ecaade2009_103
authors	Kirschner, Ursula; Pratschke, Anja
year	2009
title	Experiment Digital Space: Composition with Elements Designed by Mies van der Rohe and the Importance of their Web Presentation: Didactical Design Methods Applied in Design Studios for Architectural and Cultural Sciences in Brazil, University of São Paulo and in Germany, Leuphana University of Lüneburg
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 787-792
doi	https://doi.org/10.52842/conf.ecaade.2009.787
wos	WOS:000334282200096
summary	This empirical research project is a didactical teaching method intended to introduce students interested in space to theoretical architecture topics using specific computer capacities. In different variations, this teaching method was tested on students of Cultural Sciences and Architecture in Brazil and in Germany. With this method, even students without previous CAD or architecture experience can creatively design spaces. Visualization of the design process as Web design joins the individual aspects to a logical composite and applies the computer as “brain-craft” to complement handcraft. For the creative tasks, this means interaction in a complex information structure where the borders between the disciplines fade.
keywords	Design, didactic, CAD, web design, interdisciplinary
series	eCAADe
email
last changed	2022/06/07 07:52

_id	sigradi2009_143
id	sigradi2009_143
authors	Levy, Adrian Jose; Rivka Oxman
year	2009
title	Architects of information: Designing Architectural metaphors
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	Recently, the handling of information design by architects was motivated by the progress and exploration of digital technologies. They began to experiment with the use of informational metaphors and their application in virtual environments. This paper presents these new experimentations in 3D information visualization designed by architects interested in experimentation with digital media as information environments in design. The examples presented in this paper attempt to demonstrate the design of information and aim to illustrate approaches to the representation of the structure and relationships within abstract datasets. The architectural exploitation of metaphors may constitute unique formulations of knowledge structures capable of communicating information in unique ways.
keywords	architectural metaphors; information visualization; data structure; information representation; visual metaphor
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	acadia09_159
id	acadia09_159
authors	Peronto, John; Maschke, Ken; Sinn, Robert; Xu, Fei; Raines, Ben; Rehill, Dennis
year	2009
title	Data Flow and Communication in the Design of Complex Architectural Forms
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 159-164
doi	https://doi.org/10.52842/conf.acadia.2009.159
summary	Recent advances in architectural and engineering technology have opened the door for complex architectural expression in today’s built environment. When pushing the envelope on geometric complexity, architects and engineers must begin a dialogue early on in the design process and communicate effectively throughout. Using digital models for communication, visualization, and analysis creates additional digital information that may need to be shared. Middleware provides interoperability between different software packages and facilitates the exchange of information. However, this does not exempt the partners from maintaining traditional lines of open communication. This paper will discuss the importance of open communication and demonstrate a strategy for sharing digital information. The case studies that will be presented are taken from design projects whose geometric complexity required close partnership between design team members. Effective communication will first be discussed in the context of three sculptural concept designs. Second, the interoperability of digital models will be discussed through a case study of a complex, faceted super-tall high-rise tower.
keywords	Complex design, construction, collaboration, scripting, analysis
series	ACADIA
type	Normal paper
email
last changed	2022/06/07 08:00

_id	sigradi2009_881
id	sigradi2009_881
authors	Pina, Silvia Mikami; Ana Maria Reis de Goes Monteiro; Regina Ruschel
year	2009
title	A collaborative virtual environment for architectural design promoting life quality and sustainability improvements in low income housing projects
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This work presents a learning action developed to verify in what degree could the TIDIA-Ae virtual environment support design education emphasizing remote collaboration and the manipulation/visualization of data in multiple formats. The TIDIA-Ae virtual environment is a product of the Program on Information Technology in Development of Advanced Internet sponsored by the Foundation for the Support of Research of the State of São Paulo - FAPESP. A design exercise was developed enforcing the inclusion of guidelines for community integration and security, implementation, street system and parking, public, private and open space, and landscaping considering quality of life and sustainability for low income housing projects.
keywords	Collaborative Design; Social Housing; Quality of Life; Sustainability
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	sigradi2009_1008
id	sigradi2009_1008
authors	Silva, Isabel Cristina Siqueira da; Vinicius de Moraes Netto; Carla Maria Dal Sasso Freitas
year	2009
title	Novos Caminhos para Simulação Urbana: Integrando Métodos de Visualização de Informações e Modelagem de Agentes e Redes Espaciais [Integrating Information Visualization methods in an agent-based approach to urban simulation]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This paper defines paths into the integration of urban simulation and new methods of Information Visualization (IV) first observing the current state of IV methods in general, and visualization in urban modelling and simulation in particular. Secondly, it proposes a set of issues where progress in forms of integrating IV methods into urban simulation techniques can be made – namely, through the concept of ontologies (rules of relations between categories of objects and information) – in stages like problem definition and analysis, information processing and the generation of user-friendly graphic outputs for simulated scenarios and analyses.
keywords	Visualização de Informações; Urbanismo; Ontologias
series	SIGRADI
email
last changed	2016/03/10 10:00

For more results click below: