Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 593

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2009_091
id	caadria2009_091
authors	Pitts, Greg; Sambit Data
year	2009
title	Parametric Modelling of Architectural Surfaces
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 635-644
doi	https://doi.org/10.52842/conf.caadria.2009.635
summary	Parametric modelling is gaining in popularity as both a fabrication and design tool, but its application in the architectural design industry has not been widely explored. Parametric modelling has the ability to generate complex forms with intuitively reactive components, allowing designers to express and fabricate structures previously too laborious and geometrically complex to realise. This allows designers to address a project at both the macro and micro levels of resolution in the governing control surface and the individual repetitive component. This two level modelling control, of component and overall surface, can allow designers to explore new types of form generation subject to parametric constraints. Shading screens have been selected as the focus for this paper and are used as a medium to explore form generation within a given set of functional parameters. Screens can have many applications in a building but for the purpose of the following case studies, lighting quality and passive sun control are the main functional requirement. A set of screen components have been designed within certain shading parameters to create a generic component that can automatically adapt to any given climatic conditions. These will then be applied to surfaces of varying degrees of geometric complexity to be analysed in their ability to correctly tessellate and create a unified screening array true to the lighting requirements placed on the generic component.
keywords	Parametric Modelling: Screening; Design; Fabrication
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	ascaad2009_mustapha_ben_hamouche
id	ascaad2009_mustapha_ben_hamouche
authors	Ben-Hamouche, Mustapha
year	2009
title	Gis in Architectural Education: Design as a place-making process
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 393-407
summary	Responsiveness to site conditions and environment is one of the axioms of architectural design. However, most students’ design is made in a non-geo-coordinated cyberspace through CAAD design and thus leading to “flying” proposals” that are not attached to the context. GIS teaches students in architecture to initially refer to real locations as the space in which they design is geo-coordinated and provides the wider context of the project. Along the design process, the project surroundings from macro scale; that is the globe, to the micro-scale that is reflected in the existing buildings, the road network and the topography are constantly present. At the end stage, the project is seen not as a free standing building but rather as an integral part in a real place on Earth. The 3-D urban visualization gives the possibility of evaluating the degree of success of place-making and the fitness of the project to its context. The aim of the paper is to present how a GIS course can support CAAD and improve the architectural design process as well as the quality of the design output towards a contextual architecture. The paper is based on the experience of the author who is architects and urban planner, in teaching design studios and Urban Planning based on GIS as an elective course to graduating students in architecture at the University of Bahrain. It presents an alternative method that is called Permanent Presence of the Real World PPRW.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	cf2009_410
id	cf2009_410
authors	Abdelhameed, Wael
year	2009
title	Reciprocal relationship of conceptualization and design problem definition: A proposed approach for an architectural design studio
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 410-422
summary	This research paper proposes an approach to be applied in the design studio. The proposed approach highlights the reciprocal relationship between concept articulation and design problem definition in a design method that exposes different design activities related to this relationship. The design method was applied in a design studio of an intermediate level. The study reports the analysis of student designs in terms of the deign method employed. Moreover, a survey was carried out in order to measure the responses of students and instructors regarding the design method and its approach. The main structure of the design method proposed can be described as follows: although the relationship of concept articulation and design-problem definition are reciprocal, the influence of one direction can be distinguished more than of the other direction on different design activities. The research using qualitative and quantitative methodologies analyzes the results and outputs of the theoretical investigations, the practical application in the design studio, and the questionnaire responses through different methodological tools.
keywords	Conceptual design, design method, architectural design studio
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	ascaad2009_wael_abdelhameed
id	ascaad2009_wael_abdelhameed
authors	Abdelhameed, Wael
year	2009
title	Assessment of a Physical Planning Project through Virtual Reality: A case study
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 365-378
summary	The study reports an application of VR models in the assessment of a part of physical planning project. The project outputs were different reports, GIS data and maps, and CAD drawings. The GIS data were used to create the VR models by importing Shpfiles of the GIS project outputs to VR software. The study presents VR models and the assessment of the physical planning project in terms of: 1) effect of the population increase, 2) effect of the required residential units, and 3) quality assurance for the current situation and future situation. The method used to build up the VR Models was through satellite images (by Google Earth Pro) and VR software (by UC Win/Road). Different models were built up to visualize and assess the alternative solutions and various influential factors. The study employed Virtual Reality in various urban and planning problems through models that are employed as tools of communication and design. The visualized environment and the associated models facilitated the evaluation of important areas, namely: impact of different factors and alternative solutions. The study concludes that the processes, such as decision making, visualization and representation, performed through VR manifest its importance to different design phases of urban and physical planning.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	4c44
id	4c44
authors	Beirão, José; Duarte, José; Gil, Jorge; Montenegro, Nuno
year	2009
title	Monitoring urban design through generative design support tools: a generative grammar for Praia
source	Proceedings of 15 Congresso da APDR, Cidade da Praia, Cabo Verde.
summary	Abstract Urban planning and design has a considerable impact on the economic performance of cities and regions. It is a complex process that extends for a long period and involves many participants. The lack of integrated tools to support this process hampers the ability to maximize the response of plans to contextual conditions while using the least resources. This paper describes research that aims to develop such a tool, integrating formulation, generation, and evaluation capabilities. It is focused on the generation module which relies on the encoding of Urban Induction Patterns (UIP) using shape grammars. A grammar for the extension plan of the city of Praia is presented as one of the case studies used to support UIP definition and illustrate its application. The paper also discusses how the proposed tool can be used for developing and monitoring urban plans.
keywords	shape grammars; generative urban design; planning
series	other
type	normal paper
email
more	http://www.apdr.pt/congresso/2009/
last changed	2009/07/30 15:58

_id	cf2011_p135
id	cf2011_p135
authors	Chen Rui, Irene; Schnabel Marc Aurel
year	2011
title	Multi-touch - the future of design interaction
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 557-572.
summary	The next major revolution for design is to bring the natural user interaction into design activities. Graphical User Interfaces (GUI) brought a new approach that was more effective compared to their conventional predecessors. In recent years, Natural User Interfaces (NUI) have advanced user experiences and multi-touch and gesture technologies provide new opportunities for a variety of potential uses in design. Much attention has been paid to leverage in the design of interactive interfaces. The mouse input and desktop screen metaphors limit the information sharing for multiple users and also delayed the direct interaction for communication between each other. This paper proposes the innovative method by integrating game engine ‘Unity3D’ with multi-touch tangible interfaces. Unity3D provides a game development tool as part of its application package that has been designed to let users to focus on creating new games. However, it does not limit the usage of area to design additional game scenarios since the benefits of Unity3D is allowing users to build 3D environments with its customizable and easy to use editor, graphical pipelines to openGL (http://unity3d.com/, 2010 ). It creates Virtual Reality (VR) environments which can simulates places in the real world, as well as the virtual environments helping architects and designers to vividly represent their design concepts through 3D visualizations, and interactive media installations in a detailed multi-sensory experience. Stereoscopic displays advanced their spatial ability while solving issues to design e.g. urban spaces. The paper presents how a multi-touch tabletop can be used for these design collaboration and communication tasks. By using natural gestures, designers can now communicate and share their ideas by manipulating the same reference simultaneously using their own input simultaneously. Further studies showed that 3Dl forms are perceived and understood more readily through haptic and proprioceptive perception of tangible representations than through visual representation alone (Gillet et al, 2005). Based on the authors’ framework presented at the last CAADFutures, the benefits of integrating 3D visualization and tactile sensory can be illustrated in this platform (Chen and Wang, 2009), For instance, more than one designer can manipulate the 3D geometry objects on tabletop directly and can communicate successfully their ideas freely without having to waiting for the next person response. It made the work more effective which increases the overall efficiency. Designers can also collect the real-time data by any change they make instantly. The possibilities of Uniy3D make designing very flexible and fun, it is deeply engaging and expressive. Furthermore, the unity3D is revolutionizing the game development industry, its breakthrough development platform for creating highly interactive 3D content on the web (http://unity3d.com/ , 2010) or similar to the interface of modern multimedia devices such as the iPhone, therefore it allows the designers to work remotely in a collaborative way to integrate the design process by using the individual mobile devices while interacting design in a common platform. In design activities, people create an external representation of a domain, often of their own ideas and understanding. This platform helps learners to make their ideas concrete and explicit, and once externalized, subsequently they reflect upon their work how well it sits the real situation. The paper demonstrates how this tabletop innovatively replaces the typical desktop metaphor. In summary, the paper addresses two major issues through samples of collaborative design: firstly presenting aspects of learners’ interactions with physical objects, whereby tangible interfaces enables them constructing expressive representations passively (Marshall, 2007), while focussing on other tasks; and secondly showing how this novel design tool allows designers to actively create constructions that might not be possible with conventional media.
keywords	Multi-touch tabletop, Tangible User Interface
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ijac20097203
id	ijac20097203
authors	Eilouti, Buthayna h.
year	2009
title	A Digital Incorporation of Ergonomics into Architectural Design
source	International Journal of Architectural Computing vol. 7 - no. 2, 235-253
summary	A project that is particularly designed for digital studio settings is described. Facilitated by multiple computer modeling and animation software, the project incorporates concepts and applications of ergonomics and kinetics as two ingredients and concept generators with problem-based learning techniques into architectural designing. Reflections about the project and its outcomes are reported and discussed. The results indicate that considerations of ergonomics, flexibility, mobility and responsiveness in dynamic structures and their interactions with users can enrich and optimize generated designs. Similarly, the application of problem-based designing approach seems to foster critical thinking of participants and improve their involvement in collaborative design processing.
series	journal
last changed	2009/08/11 08:39

_id	ascaad2009_marek_hnizda
id	ascaad2009_marek_hnizda
authors	Hnizda, Marek
year	2009
title	Systems-Thinking: Formalization of parametric process
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 215-223
summary	This paper details a design process focused on explicit digital parametric modeling as an integral system-outcome design. This investigation isolates and alters a simple geometric form (cylinder) in a constructed architectural design method. Systems are defined as logical, sequential operations inherent to the resultant effects. These operations within each system are composed of various parameters, singular entities containing or referencing data. Given specific data, operations are preformed culminating with corresponding outcomes. The two main components of this research pertain to object extraction and transformation. A single grain silo (cylinder), as the architectural/geometric object under examination, is tested using a system of varied parameters inputted into the program Grasshopper, an “explicit history” graphic plug-in for Rhinoceros. This application is utilized to digitally manipulate parameters as objects in a nodal arrangement. Throughout the operations execution, this isolated silo will be transformed into a multitude of versions, then regrouped into the original cluster of silos to expose the implications from patterning, adjacency, and repetition given the proximity of the each silo and its new parametric characteristics. As the various parameters in specific operations affect the system as a whole, so is each adjacent silo in proximity given the same or similar operation? This then is translated and reflected in the outcome. This research seeks to explore design process by applying constant digital 3-D reductive geometric, modular forms inviting systems thinking in parametric environments that can lead to architectural design implications. By focusing on the technical aspect of the parameterization and valuing functionality rather then style, the process becomes focused on formal qualities as the system-outcome relationships. This research tests the “aesthetic implications” of a varied mode of digital design, namely the investigation of an architectural process utilizing parametric design.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	sigradi2009_667
id	sigradi2009_667
authors	Leão, Elisângela Conceição Dantas; Arivaldo Leão de Amorim
year	2009
title	Kirimurê: uma aplicação da Modelagem Geométrica na produção da Forma Arquitetônica [Kirimurê: an application of geometric modeling on the synthesis of Architectural Form]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	Kirimurê is as Brazilian Indian Tupinambás called the Baia de Todos os Santos. Around the bay developed a region with significant agricultural production, at a time Salvador was the main export port in the Southern Hemisphere. This economic strength and its export potential were greatly due to the saveiro, a small wooden vessel with sail propulsion, which dominated these waters for a long time. Testimony of the Bahia’s history, they had great influence in the culture of Bahia. Currently, these vessels are disappearing and with them the traditional techniques of shipbuilding, intangible heritage, held in memory of the master builders. This paper presents an experience in developing the architectural shape of a complex building using geometric modeling, to house this cultural heritage.
keywords	Saveiros; Reconcavo Baiano; Cultural Heritage; Ship-building; Geometric Modeling; Architectural Design
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	ecaade2009_078
id	ecaade2009_078
authors	Lyon, Eduardo
year	2009
title	Digital Fabrication and Component Optimization Using DFM: Integrating Two-dimensional Cutting and Three-dimensional Milling in Wood Panel Fabrication
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 565-572
doi	https://doi.org/10.52842/conf.ecaade.2009.565
wos	WOS:000334282200068
summary	This research explores new ways to integrate manufacturing knowledge in to design phases. Through the use of design for manufacturing (DfM) concept, and looking at relations between its potential application in component design and its implementation using digital manufacturing technologies, the author implemented a DfM model that varies from previous models by incorporated learning in the process. This process was based on; a knowledge systematization process; and the incremental development and refinement of design heuristics and metrics. Subsequently the attempt on this research is twofold. One is to realize a process to capture and organize manufacturing knowledge, and second to organize that knowledge and make it available as a DfM model for component design using specific CNC technology.
keywords	Design Computing, design for manufacturing, knowledge based design, digital manufacturing
series	eCAADe
email
last changed	2022/06/07 07:59

_id	cf2011_p110
id	cf2011_p110
authors	Mcmeel, Dermott
year	2011
title	I think Therefore i-Phone: The influence of Pervasive Media on Collaboration and Multi-Disciplinary Group Work
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 69-84.
summary	The study of value and its transfer during the multi-disciplinary process of design is stable fodder for research; an entire issue of Design Studies has been devoted to Values in the Design Process. By scrutinising design meetings Dantec (2009) and Ball (2009) separately examine the mechanisms of value transfer between the agents involved in design (clients, designers, engineers). Dantec suggests this is best understood in terms of requirement, values and narrative; Ball proposes it should be viewed as a combination of "analogical reasoning" and "environmental simulation". If we look at Vitruvius and his primary architectural manual (Pollio 1960) we find values‚Äîin the form of firmitas, utilitas and venustas‚Äîembedded in this early codification of architectural practice. However, as much current research is restricted to design practice what occurs when value frameworks move between domains of cultural activity (such as design to construction and vice-versa) is not privileged with a comparably sizable body of research. This paper is concerned with the ongoing usage of pervasive media and cellular phones within communications and value transfer across the disciplinary threshold of design and construction. Through participation in a building project we analyse the subtleties of interaction between analogue communication such as sketches and digitally sponsored communication such as e-mail and mobile phone usage. Analysing the communications between the designer and builder during construction suggests it is also a creative process and the distinctions between design and construction processes are complex and often blurred. This work provides an observational basis for understanding mobile computing as a dynamic ‚Äòtuning‚Äô device‚Äîas hypothesized by Richard Coyne (2010)‚Äîthat ameliorates the brittleness of communication between different disciplines. A follow up study deploys ‚Äòdigital fieldnotes‚Äô (dfn) a bespoke iPhone application designed to test further suppositions regarding the influence exerted upon group working by mobile computing. Within collaboration individual communiqu_©s have different levels of importance depending on the specific topic of discussion and the contributing participant. This project furthers the earlier study; expanding upon what mobile computing is and enabling us to infer how these emergent devices affect collaboration. Findings from these two investigations suggest that the synchronous and asynchronous clamour of analogue and digital tools that surround design and construction are not exclusively inefficiencies or disruptions to be expunged. Observational evidence suggests they may provide contingency and continue to have value attending to the relationship between static components‚Äîand the avoidance of failure‚Äîwithin a complex system such as design and construction.
keywords	collaboration, design, mobile computing, digital media
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2009_1204
id	sigradi2009_1204
authors	Monteiro, Ari; Eduardo Toledo Santos
year	2009
title	O Uso de Modelagem Generativa para Representação de Modulações de Alvenarias em Ferramentas BIM
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	One approach to perform the design for production of masonry with BIM tools is to explicitly represent the wall elements. However, this strategy decreases the application performance because of model complexity. Generative Modeling is a modeling paradigm aimed at defining rules and applying them for generating models. The masonry block placement is associated with a set of rules, making the use of generative modeling a viable solution to implicitly represent the blocks. This paper presents some preliminary results of our research on investigating if Generative Modeling can help in the representation of masonry modulation and for the proposal of a shape grammar for representing its basic elements.
keywords	modelagem generativa; gramática de forma; projeto para a produção; alvenaria; ferramentas BIM
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	caadria2009_067
id	caadria2009_067
authors	Nilkaew, Piyaboon
year	2009
title	The Study of Building Management by using 3D Digital Modeling and Database: ABFM
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 235-243
doi	https://doi.org/10.52842/conf.caadria.2009.235
summary	The principal objective of building management is to control facilities planning and facilities operations and maintenance, that effective criteria in strategic planning about preventive maintenance and predictive maintenance. The key of success in managing the building and facilities is all about collecting and interpreting data on diverse facets of property use. Computer databases are the ideal vehicles in which to log, store and manipulate data; almost unlimited information can be measured and entered en masse. The strength of such information storage is its capacity for expansion and the diversity of subject; it becomes large and requires greater and greater operator familiarity with its structure in order to interrogate successfully. The ultimate solution is to computer–base the entire operation, by using the three-dimensional building modelling to control the operation. This solution will simulate building in virtual environment and the building system data (Architectural part and Engineering part) will collect in digital data type. The digital data will classification and made three-dimensional database relations. This research focus in three sections of the operation as three-dimensional database relationship, topological simulation and smart system, that applied to generate the prototype building management application “Architecture Building Facilities Management: ABFM”.
keywords	Building management; facilities management; 3D database; smart system
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	ascaad2009_giuseppe_pellitteri
id	ascaad2009_giuseppe_pellitteri
authors	Pellitteri, Giuseppe; Raimondo Lattuca, Salvatore Concialdi, Giuseppe Conti and Raffaele De Amicis
year	2009
title	Architectural Shapes Generated in 3DGeobrowser through Environmental Constraints
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 281-295
summary	The final configuration of the architectural shape is deeply conditioned by all constraints that the environmental context imposes. These, duly codified, can therefore generative elements that can be managed by the designer. Following a parametric approach, the architectural envelope is directly related to the constraints emerging from the urban context. In this paper we present the development and implementation of an application, which allows to generating three-dimensional models of buildings, directly within a three-dimensional geo-referenced environment. The application offers the user many innovative suggestions, associating the modeling ability, typical of the CAD systems, to the opportunity offered by the geo-referenced systems, to evaluate in real time the impact of the buildings directly on its environment, within which it can be generated and manipulated. The designer is able to explore several alternative solutions, according to formal requirements and style preferences. Three experiments are presented for different urban scenarios.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	cf2011_p018
id	cf2011_p018
authors	Sokmenoglu, Ahu; Cagdas Gulen, Sariyildiz Sevil
year	2011
title	A Multi-dimensional Exploration of Urban Attributes by Data Mining
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 333-350.
summary	The paper which is proposed here will introduce an ongoing research project aiming to research data mining as a methodology of knowledge discovery in urban feature analysis. To address the increasing multi-dimensional and relational complexity of urban environments requires a multidisciplinary approach to urban analysis. This research is an attempt to establish a link between knowledge discovery methodologies and automated urban feature analysis. Therefore, in the scope of this research we apply data mining methodologies for urban analysis. Data mining is defined as to extract important patterns and trends from raw data (Witten and Frank, 2005). When applied to discover relationships between urban attributes, data mining can constitute a methodology for the analysis of multi-dimensional relational complexity of urban environments (Gil, Montenegro, Beirao and Duarte, 2009) The theoretical motivation of the research is derived by the lack of explanatory urban knowledge which is an issue since 1970‚Äôs in the area of urban research. This situation is mostly associated with deductive methods of analysis. The analysis of urban system from the perspective of few interrelated factors, without considering the multi-dimensionality of the system in a deductive fashion was not been explanatory enough. (Jacobs, 1961, Lefebvre, 1970 Harvey, 1973) To address the multi-dimensional and relational complexity of urban environments requires the consideration of diverse spatial, social, economic, cultural, morphological, environmental, political etc. features of urban entities. The main claim is that, in urban analysis, there is a need to advance from traditional one dimensional (Marshall, 2004) description and classification of urban forms (e.g. Land-use maps, Density maps) to the consideration of the simultaneous multi-dimensionality of urban systems. For this purpose, this research proposes a methodology consisting of the application of data mining as a knowledge discovery method into a GIS based conceptual urban database built out of official real data of Beyoglu. Generally, the proposed methodology is a framework for representing and analyzing urban entities represented as objects with properties (attributes). It concerns the formulation of an urban entity‚Äôs database based on both available and non-available (constructed from available data) data, and then data mining of spatial and non-spatial attributes of the urban entities. Location or position is the primary reference basis for the data that is describing urban entities. Urban entities are; building floors, buildings, building blocks, streets, geographically defined districts and neighborhoods etc. Urban attributes are district properties of locations (such as land-use, land value, slope, view and so forth) that change from one location to another. Every basic urban entity is unique in terms of its attributes. All the available qualitative and quantitative attributes that is relavant (in the mind of the analyst) and appropriate for encoding, can be coded inside the computer representation of the basic urban entity. Our methodology is applied by using the real and official, the most complex, complete and up-to-dataset of Beyoglu (a historical neighborhood of Istanbul) that is provided by the Istanbul Metropolitan Municipality (IBB). Basically, in our research, data mining in the context of urban data is introduced as a computer based, data-driven, context-specific approach for supporting analysis of urban systems without relying on any existing theories. Data mining in the context of urban data; ‚Ä¢ Can help in the design process by providing site-specific insight through deeper understanding of urban data. ‚Ä¢ Can produce results that can assist architects and urban planners at design, policy and strategy levels. ‚Ä¢ Can constitute a robust scientific base for rule definition in urban simulation applications such as urban growth prediction systems, land-use simulation models etc. In the paper, firstly we will present the framework of our research with an emphasis on its theoretical background. Afterwards we will introduce our methodology in detail and finally we will present some of important results of data mining analysis processed in Rapid Miner open-source software. Specifically, our research define a general framework for knowledge discovery in urban feature analysis and enable the usage of GIS and data mining as complementary applications in urban feature analysis. Acknowledgments I would like to thank to Nuffic, the Netherlands Organization for International Cooperation in Higher Education, for funding of this research. I would like to thank Ceyhun Burak Akgul for his support in Data Mining and to H. Serdar Kaya for his support in GIS.
keywords	urban feature analysis, data mining, urban database, urban complexity, GIS
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2009_833
id	sigradi2009_833
authors	Stoyanov, Momchil
year	2009
title	Análise lumínica virtual de elementos construídos por meio de programação: exemplo de aplicação em software do tipo BIM [ Analysis of Virtual Elements Constructed by Means of Programming: The Example of BIM-Application Software]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	Daylighting is an important part of designing sustainably. Daylighting is the use of natural light for primary interior illumination. This reduces our need for artificial light within the space, thus reducing internal heat gain and energy use. Direct sunlight, once it enters the building, is not only light but heat, and that additional heat will need to be taken into account in your energy analysis." While Autodesk Revit Architecture 2010 (ARA) itself cannot perform the actual analysis, there are some ways to do that. This papper focuses on the study of parametric modeling using a BIM tool for daylighting analysis. This paper presents the first part of the building method of LUME, a plug-in maked whit C# programming language in Microsoft Visual Studio 2010 and ARA Software Developer Kit (SDK) package. The script accepts as its input a standard three dimensional model of building opening and his position on space.
keywords	Script language; BIM; Revit Architecture; Energy analysis; Daylighting; Parametric design process
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	ecaade2013_187
id	ecaade2013_187
authors	Tompson, Tim and Haeusler, M. Hank
year	2013
title	Investigating Tools for Multi-Stakeholder Decision Making to Improve the Spatial Performance in Transport Interchanges
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 233-242
doi	https://doi.org/10.52842/conf.ecaade.2013.1.233
wos	WOS:000340635300024
summary	Public transport interchanges often involve several stakeholders for planning and decision-making. As a result complexity leads to inefficient processes, leading to indecision, disruption, or costly delays. Consequently, the paper focuses on the application of tools for navigation and prioritization of opportunities in the need finding, fuzzy-front end, or mystery phase as introduced by Martin (2009). The paper outlines in a case study how a multi-stakeholder platform can progress from complete ambiguity in project definition through to clearly defined and understood projects that have a shared intent across the multi-stakeholder platform. These tools have been applied in a public transport context, by demonstrating the process of integrating digital innovation into various stakeholders through a participatory research process. The paper introduces the research background; discusses the hypothesis; outlines the case study; emphasizes its significance for multi-stakeholder decision-making and discusses the opportunities for the built environment.
keywords	Participatory design; soft-systems methodology; multi-stakeholder; urban planning; transport environment.
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ijac20097207
id	ijac20097207
authors	Wang, Xiangyu
year	2009
title	Augmented Reality in Architecture and Design: Potentials and Challenges for Application
source	International Journal of Architectural Computing vol. 7 - no. 2, 309-326
summary	Recent advances in computer interface and hardware power have fostered Augmented Reality (AR) prototypes for various architecture and design applications. More intuitive visualization platforms are necessary for efficient use of digital information nowadays in the architecture and design industries. As a promising visualization platform to address this need, this paper introduces the concept and associated enabling technologies of AR and also presents a survey of its existing applications in the area of architecture and design. Another focus of the paper is to discuss how the identified key technical issues could potentially be addressed in the context of architecture and design applications.
series	journal
last changed	2009/08/11 08:39

_id	acadia09_264
id	acadia09_264
authors	Zhang, Yu; Feng, Han; Wang, Jianguo
year	2009
title	An Interactive Decision Support System for Deriving Plot Ratios Based on the Similarity Relations Between Land Attributes
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 264-266
doi	https://doi.org/10.52842/conf.acadia.2009.264
summary	This paper presents a simple tool for deciding land attribute plot ratios by defining elementary entities and their relationships from the viewpoint of a complex adaptive system. Each entity in this case, a block in the city, is described according to its condition and potential for development, such as land function, accessibility, landscape control, and so on. This not only provides a rich yet subtle identification of each entity, but also creates the basis to establish dynamic interconnections between them. The similarity coefficient, calculated by the comparison between the different blocks’ factors fits well with the explanation of the spontaneous development of the city. The weight of every factor and the threshold of the similarity coefficient are both set as variables, with the optimized value recommended as a default, which ensures a multitudinal application of this software with a focus on different aspects of urban planning. The resultant self-regulatory system with flexible input is not only a credible tool for deriving plot ratios, but also an effective platform to activate urban design creations. The system, as a socio-technical tool, enhances the essential process of urban self-organization and hetero-organization.
keywords	Decision Support, software, self-organization systems, parametric systems
series	ACADIA
type	Short paper
email
last changed	2022/06/07 07:57

_id	ascaad2009_000
id	ascaad2009_000
authors	Abdelhameed, Wael; N. Hamza and A. Bennadji (eds.)
year	2009
title	Digitizing Architecture: Formalization and Content
source	4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009)[ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, 463 p.
summary	CAAD is constantly provoking and raising many potentials, challenges and arguments in academia, practice, and even in the theory of architecture itself. This process starts with the pedagogy of designing and the ongoing questions such as how much of CAAD should be incorporated in teaching, and ends with digital design technologies and the new emerging questions such as how biologically inspired computational processes alter the form of our architecture and the typical design process. Architecture originates from peoples’ needs and beliefs. The new forms of digital architecture generate debates in terms of various important issues, ranging from emotional and social factors to sustainability and warming climate. The focus area of the conference can be shaped, as follows: considering all these potentials, challenges, and arguments, which we have to benefit from and cope with, are there truly legitimate concerns about the future of our architecture and its content in particular from human and environmental dimensions? Can we develop our own ways of benefiting from the technology that cater to our environment and culture? Can we still see the form of architecture in the traditional way or should we change our perspectives? In other words the conference concentrates on bridging between the new digital form and the traditional human content.
series	ASCAAD
type	normal paper
email
last changed	2010/02/26 07:31

For more results click below: