Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 593

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2009_mohamed_abdalla
id	ascaad2009_mohamed_abdalla
authors	Abdalla, Mohamed Saad Atia
year	2009
title	3D Model and Decision Support System for Fire Safety: A case study of Kingdom of Bahrain
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 419-430
summary	Fire agencies on all levels try hard to save lives, properties, and natural resources. Accurate access to critical information is essential in this regard, many agencies around the world have embraced GIS as a tool that helps them balance needs, uses, and hazards to promote sustainability of the environment while identifying and limiting vulnerability. At Kingdom of Bahrain, Ministry of interior established the Geographic Security System (GSS) to enhance the emergency response. The 3D of the GSS Consisted of 3 main parts: (1) 3D for terrain model, (2) 3D model for entire targeted zones, and (3) 3D models for individual buildings. In this paper, the integration between GSS system and 3D model will be illustrated, and how this kind of integration could enhance decision support system (DSS) for fire safety at kingdom of Bahrain. On other hand, we will highlight the technical and legislation difficulties faced in this project. Also, the future steps to enhance DSS will be discussed.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ascaad2009_wael_abdelhameed
id	ascaad2009_wael_abdelhameed
authors	Abdelhameed, Wael
year	2009
title	Assessment of a Physical Planning Project through Virtual Reality: A case study
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 365-378
summary	The study reports an application of VR models in the assessment of a part of physical planning project. The project outputs were different reports, GIS data and maps, and CAD drawings. The GIS data were used to create the VR models by importing Shpfiles of the GIS project outputs to VR software. The study presents VR models and the assessment of the physical planning project in terms of: 1) effect of the population increase, 2) effect of the required residential units, and 3) quality assurance for the current situation and future situation. The method used to build up the VR Models was through satellite images (by Google Earth Pro) and VR software (by UC Win/Road). Different models were built up to visualize and assess the alternative solutions and various influential factors. The study employed Virtual Reality in various urban and planning problems through models that are employed as tools of communication and design. The visualized environment and the associated models facilitated the evaluation of important areas, namely: impact of different factors and alternative solutions. The study concludes that the processes, such as decision making, visualization and representation, performed through VR manifest its importance to different design phases of urban and physical planning.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ascaad2009_hussein_albotany
id	ascaad2009_hussein_albotany
authors	Albotany, Hussein S.
year	2009
title	Development of Digital City Models Using 3d GIS
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 409-418
summary	“Digital city” is a copy of an actual city in the virtual space. It is expected to play an important role in urban planning, disaster simulation etc. Recent advanced remote sensing technologies, which are capable to quickly provide detailed information of city areas, ease the construction of 3D city models. Urbanization has evinced interest from a wide section of the society including experts, amateurs and novices. With the development and infrastructure initiatives mostly around the urban centers, the impacts of urbanization and sprawl would be on the environment and the natural resources. The research introduces an application of 3D GIS on Manama City.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	sigradi2009_984
id	sigradi2009_984
authors	Araujo, Nieri Soares de
year	2009
title	A materialização do modelo digital no processo de ensino [The materialization of the digital model in the education process]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	The research presents the importance of the experimentations within education of architecture project. Since the studies for traditional and emergent ways with use them digital tools, it values the project inquiries in the simulations of the models in 3D. For many times, the digital model for being tangible cannot present a difficulty in the understanding of constructive details. As in the digital tools, more specifically BIM (Building Information Modeling) possess integrated standards complex. The necessity of the materialization becomes inevitable use of the Rapid Prototype (RP) that it is a technology that allows the materialization of the complex digital models facilitating to the tactile and percipient use for better understanding and taking of decision.
keywords	Education Process; Physical and Digital Model; Rapid Prototype
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2009_164
id	ecaade2009_164
authors	Arslan Selçuk, Semra; Gönenç Sorguç, Arzu
year	2009
title	Exploring Complex Forms in Nature Through Mathematical Modeling: a Case on Turritella Terebra
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 665-672
doi	https://doi.org/10.52842/conf.ecaade.2009.665
wos	WOS:000334282200080
summary	Changing paradigm of nature-architecture relationship has being directly affected from developing science and technologies as well as from the impact of biomimetic inventions in various man made designs. Our perception of forms and structures are also shifting through use of computational techniques. From this aspect, mathematical models can be considered as the first step to analyze the complex forms and structures in nature. In this paper it is aimed to initiate a platform in architecture which will serve for discussions to explore the potentials of these interactions under the impact of computational and information technologies, not only in terms of formal/visual way, but also extending to learn more about the formation process in nature.
keywords	Shells, learning from nature, seashells, mathematical modeling
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2009_andrea_cammarata
id	ascaad2009_andrea_cammarata
authors	Cammarata, Andrea
year	2009
title	Rebuilding Architecture: An analysis and critical investigation practice
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 121-134
summary	The Cooperative Design Environment Laboratory (CoDE Lab) is carrying out a research with students, trainees and seniors who have previously participated to CAAD-assisted design courses. These courses were developed with the aim of making participants independent from the pre-analytical phase project to the renderings of the final artifact. The programs that have been used so far are Autodesk Revit, Graphisoft Archicad and Nemetschek Allplan.The teaching workgroup has always believed that analyzing, deconstructing and reconstructing the architecture teaches much in terms of understanding. If the process is done correctly, it entirely re-traces the creative dynamics developed by the original designer. Subsequently, the educational practice is to choose a notable architectural work, designed and/or created by a Master of architecture, and to reproduce it in all details: aesthetical-formal, morphological, technological, structural, modular, etc. The final result is an archive of well-developed reconstructed models of great specific interest. The students on the other hand thoroughly learn how to control the tools and all BIM planning procedures.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	acadia09_281
id	acadia09_281
authors	Campbell, Cameron
year	2009
title	Compu-Kinetic Mediapod
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 281-283
doi	https://doi.org/10.52842/conf.acadia.2009.281
summary	This paper describes an interactive experiment in which “middleware” is interpreted as the architecture of non-building, and the making of media as mediator between physical and visual; temporal and fixed; digital and analog. Leon Battista Alberti, Jorge Silvetti, and other architectural critics have posited that architects do not make buildings but, rather, representations of buildings. The simple translation of this is that architects make drawings, models, computer simulations, and the like for the ultimate purpose of making a building. This work challenges the notion that architects make only representation media, and expands the role of architecture to include mediation as an act upon a space that is both physical and analytical. What if architects make, but they don’t make for the end result of a building? What if architects make representations that are physical and experiential, and that are designed and built without the presumption of a building? This is the space that middleware occupies.
keywords	Media, interactive design, middleware
series	ACADIA
type	Short paper
email
last changed	2022/06/07 07:54

_id	ecaade2009_111
id	ecaade2009_111
authors	Cannaerts, Corneel
year	2009
title	Models of / Models for Architecture: Physical and Digital Modelling in Early Design Stages
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 781-786
doi	https://doi.org/10.52842/conf.ecaade.2009.781
wos	WOS:000334282200095
summary	This paper questions whether physical and digital models can be seen as models for rather than models of architecture. Stressing the mediated nature of the design process, it questions the role models play in the early stage of architectural design. This research draws from an experimental digital & physical modelling workshop. The conclusion argues for a modelling process that incorporates both physical and digital modelling, and acknowledges the mediated nature of the design process.
keywords	Modelling, digital, physical
series	eCAADe
email
last changed	2022/06/07 07:54

_id	506b
id	506b
authors	Christenson, Mike
year	2009
title	Testing the relevance of parameterization to architectural epistemology
source	Architectural Science Review, Volume 52.2: 135-141
summary	Advances in building information modeling (BIM) deeply impact the production of new architecture; its benefits are obvious and its acceptance widespread. But how does BIM impact the study of existing architecture? Can BIM be assumed to operate as a neutral framework, equally applicable to the study of architecture anywhere? Using as a point of departure a recent outline of the conceptual structure of parametric modeling prepared by Sacks, Eastman, and Lee (2004), this paper compares parametric models of two existing works of architecture: Mies van der Rohe’s Crown Hall and Peter Zumthor’s St. Benedict Chapel. The processes of parametrically modeling each building are specifically compared in two ways: first, parameters are established for each model; second, each model is "flexed" as a means of disclosing possible semantic relationships within each work of architecture. Because each building demands a different parameter-establishment strategy, and because the models permit different degrees of flexibility, the comparison illustrates the shortcomings of a "neutral framework" assumption to an architectural epistemology.
keywords	Existing architecture, Parametric modeling, Representation
series	journal paper
type	normal paper
email
more	http://www.earthscanjournals.com/asre/052/asre0520135.htm
last changed	2009/06/18 14:24

_id	sigradi2009_673
id	sigradi2009_673
authors	Costa, Fernando José de Medeiros; Marcelo Bezerra de Melo Tinôco
year	2009
title	O Uso de Maquetes e Modelos Geométricos Tridimensionais no Ensino de Arquitetura e Urbanismo [The use of 3D geometric models for teaching architecture and urban planning]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This research analyzes how schools of architecture in Brazil has responded to technological advances in the field of three-dimensional geometric modeling to support research activity and enhance education
keywords	Scale models; geometric models; rapid prototyping; architectureand planning
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	ascaad2009_tellef_dannevig
id	ascaad2009_tellef_dannevig
authors	Dannevig, Tellef; Jostein Akre Thorvaldsen and Ramzi Hassan
year	2009
title	Immersive Virtual Reality in Landscape Planning
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 349-364
summary	In Norway there has been an increased focus on participatory planning the latter years. The public is now supposed to be included in the planning process. The documents which the public have access to usually consists of the project`s technical drawings. In some cases, the documents include perspective drawing or computer rendering supplied by the stakeholder. Most affected parties are non professional in terms of planning, and have little or no experience dealing with the plans. Therefore, the information they rely on most cases is the perspective images, which easily can be manipulated. A system that enables all parties engaged in the planning process to visualize planning scenarios in a much realistic way is therefore needed. Virtual Reality is a tool that enables the viewer to move freely in a three dimensional digital environment. In this virtual world, different levels of interactivity can be added. The Norwegian University of Life Sciences (UMB) has recently installed a new immersive Virtual Reality system based on the idea of ConCave theatre. This research study is making use of the new ConCave theatre in order to test whether VR can be used as an enhancement of the communication process between professionals and amateurs and between professionals. By presenting digital models of different level of detail to two subject groups consisting of students with planning background and two groups without such experience we first investigated perception in an immersive VR-environment.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ecaade2022_367
id	ecaade2022_367
authors	Doumpioti, Christina and Huang, Jeffrey
year	2022
title	Field Condition - Environmental sensibility of spatial configurations with the use of machine intelligence
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 2, Ghent, 13-16 September 2022, pp. 67–74
doi	https://doi.org/10.52842/conf.ecaade.2022.2.067
summary	Within computational environmental design (CED), different Machine Learning (ML) models are gaining ground. They aim for time efficiency by automating simulation and speeding up environmental performance feedback. This study suggests an approach that enhances not the optimization but the generative aspect of environmentally driven ML processes in architectural design. We follow Stan Allen's (2009) idea of 'field conditions' as a bottom-up phenomenon according to which form and space emerge from local invisible and dynamic connections. By employing parametric modeling, environmental analysis data, and conditional Generative Adversarial Networks [cGAN] we introduce a generative approach in design that reverses the typical design process of going from formal interpretation to analysis and encourages the emergence of spatial configurations with embedded environmental intelligence. We call it Intensive-driven Environmental Design Computation [IEDC], and we employ it in a case study on a residential building typology encountered in the Mediterranean. The paper describes the process, emphasizing dataset preparation as the stage where the logic of field conditions is established. The proposed research differentiates from cGAN models that offer automatic environmental performance predictions to one that spatial predictions stem from dynamic fields.
keywords	Field Architecture, Environmental Design, Generative Design, Machine Learning, Residential Typologies
series	eCAADe
email
last changed	2024/04/22 07:10

_id	acadia09_18
id	acadia09_18
authors	d’Estrée Sterk, Tristan
year	2009
title	Introduction: Thoughts for Gen X-Speculating about the Rise of Continuous Measurement in Architecture
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 18-22
doi	https://doi.org/10.52842/conf.acadia.2009.018
summary	We are here, in Chicago, not to talk about what we know, but what we do not know. We are here to share ideas and to speculate about what the world might look like if it were challenged, rethought, and rebuilt. We are here to uncover, piece by piece, a sense of our own ambitions for an architecture influenced by today but motivated by tomorrow. We are all speculators and dreamers. We find places for dreaming in our work, our models, our essays, our lectures, our research, and our teaching. Through these activities we speculate on the architecture of tomorrow. Sometimes these speculations hold great promise, while at other times they do not – certainly much of what we do can be improved, refined, qualified, quantified, and genuinely benefit from being computed. This could be horrifying; it could set the scene for an engineered architecture if we do not adapt.But architecture is changing and responding to very fresh and different ways of thinking. As a movement, young architects are questioning their inheritance and establishing new values, new methods, and new forms of practice. We might best think of these young architects as the Generation X of architecture – a generation who shapes discourse through technological, social, and environmental lenses. From its smallest technical process to its highest level of thought, this conference represents the spirit of this movement.
keywords	Introduction, Measurement, dynamic design
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	ecaade2009_093
id	ecaade2009_093
authors	Elkær, Tim Nøhr
year	2009
title	Using Computers to Aid Creativity in the Early Stages of Design – or Not!: Rehabilitating the 2D/3D physical representation in Computer-Aided-Ideation
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 761-768
doi	https://doi.org/10.52842/conf.ecaade.2009.761
wos	WOS:000334282200092
summary	The introduction of Rapid Prototyping technology such as 3D printers and diverse Numerically Controlled machines such as laser cutters and milling machines, has made it obvious for many educational institutions, that a paradigm shift is occurring these years, that will forever change the design- and architectural practice, - for better or worse. This paper discusses the current change of role and status of the representation as a means to communicate design in the digital era. It outlines two opposite directions for the development of software technology, and brings forward previous and current research, on the didactic aspects of introducing digital software into the curriculum of architecture and design education. The paper describes a workshop held at the Danish Design School, where students proficient in using digital media, were challenged to use analogue models instead, to rediscover and utilize some of the creative potentials offered by this medium. Two other workshops discussing similar themes with different foci and different participants have been held since. One hosted by the Glass & Ceramic School on Bornholm, where the students are trained as traditional Craftsmen and another hosted by Nordes2009 at AHO in Oslo, where the participants came with a background in the research community. My own research interest lies in establishing or refueling a discussion on the importance of the ambiguity in a physical representation, as opposed to the finite interpretations offered by the digital modeling environment, that the profession is accustomed to work within. This interest has recently been confirmed and renewed by reading “The (soft) Architecture Machine(s)” from 1970+75 and by studying the works of Professor Julio Bermudez and Professor Bennett Neiman.
keywords	Ideation, representation, ambiguity, heuristics, design education
series	eCAADe
email
last changed	2022/06/07 07:55

_id	caadria2009_151
id	caadria2009_151
authors	Fox, Michael A.
year	2009
title	Redesigning The Brick
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 381-390
doi	https://doi.org/10.52842/conf.caadria.2009.381
summary	This research examines the value of “redesigning the brick,” in creating a new vocabulary of basic architectural building blocks with autonomous reconfigurable robotics. The paper highlights several built examples by the author of robotic architectural environments and the work of architecture students whereby individual modules were created within the context of a design studio and applied to scenarios of space making at various scales. Several strategies for decentralized control were explored dictating how individual parts of a system should behave and how local interactions between individual modules can lead to the emergence of global behaviour. The students schematically designed selfreplicating models which would allow for each object to be able to attach, detach, and reconfigure according to predetermined computational logic. The projects successfully demonstrate various strategies for mechanical design, locomotion and control.
keywords	Interactive Architecture: Modular Robotics; Robotics; Kinetics; Biomimetics
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	acadia09_278
id	acadia09_278
authors	Fritz, Randolph; Hsiao, Chih-Pin; Johnson, Brian
year	2009
title	Gizmo & WiiView: Tangible User Interfaces Enabling Architectural Presentations
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 278-280
doi	https://doi.org/10.52842/conf.acadia.2009.278
summary	Widespread use by 3D designers of simple digital modeling applications such as Google’s SketchUp may displace the use of physical models in design. However, the difficulties often faced by non-experts in the ad hoc navigation of digital models during design reviews have not been eliminated. Keyboards and mice are clumsy navigational devices and difficult to share in a collaborative setting. This work explores the combination of new, inexpensive interface hardware technologies with a popular 3D modeler in order to create a viable surrogate for physical models. Two architectural model navigation and presentation interfaces were developed, one based on an Inertial Measurement Unit (IMU) circuit board (“Gizmo”), and one that used a Wii Remote Controller (“WiiView”). Both were interfaced with the popular architectural modeling program SketchUp. Anecdotal responses and preliminary user testing results are presented.
series	ACADIA
type	Short paper
email
last changed	2022/06/07 07:50

_id	ecaade2009_193
id	ecaade2009_193
authors	Frumar, Jerome; Zhou, Yiyi
year	2009
title	Beyond Representation: Real Time Form Finding of Tensegrity Structures with 3d ‘Compressed’ Components
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 21-30
doi	https://doi.org/10.52842/conf.ecaade.2009.021
wos	WOS:000334282200001
summary	Tensegrity structures are of interest to architecture and engineering as a practical means to explore lightweight and rapidly deployable modular structures that have a high degree of geometric freedom and formal potency. The notion of tensegrity structures with 3D ‘compressed’ components is introduced and their feasibility is demonstrated through selected physical models. Attempts to further explore the architectural potential of tensegrity structures within a computational environment have proven difficult, as they are statically indeterminate and require form finding procedures to “find a geometry compatible with a self-stress state” (Motro 2002). An overview of tensegrity ‘capable’ software that can be used for architectural design is followed by a discussion that introduces an additional computational method based on particle-spring systems. This approach enables real time manipulation of tensegrity networks. Two projects that utilize this unique tool are described.
keywords	Form finding, particle-spring, tensegrity, 3D compressed component
series	eCAADe
email
last changed	2022/06/07 07:50

_id	caadria2009_016
id	caadria2009_016
authors	Hemsath, Timothy L. ; Ronald Bonnstetter, Leen-Kiat Soh and Robert Williams
year	2009
title	Digital CADCAM Pedagogy
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 277-284
doi	https://doi.org/10.52842/conf.caadria.2009.277
summary	Prototype manufacturing as an educational tool has been very successful at the college level in architecture and engineering design. This paper discusses an innovative inquiry-based learning approach rather than the problem-based learning models commonly utilized by other similar programs. For example, several research-funded technology projects (e.g., Cappelleri et al. 2007) look at involving students in problembased learning exercises (e.g., building robots); however, these exercises (while providing valuable experiences) have predetermined outcomes ingrained by the teachers, the project structure, and the components used to construct the devices. Therefore, inquisitive and creative problem solving is limited to the “kit-of-parts” in their approach to solving the problem. The inquiry-based CADCAM pedagogy model is more concerned with the process of solving a problem through the vehicle of prototyping than with the specificity of the design project itself. This approach has great potential. First, the need to solve the problem drives learning on multiple levels, integrating interdisciplinary ideas into the problem and solution. Second, the problem interlocks disciplines through inquiry knowledge building in team exercises. Finally, it encourages diversity and flexibility by allowing students to look at problems from multiples perspectives and points of view.
keywords	Inquiry-based education: CAD; CAM; pedagogy
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	acadia09_291
id	acadia09_291
authors	Hemsath, Timothy L.; McCracken, Brian; Russell, Darin
year	2009
title	Decon Recon: Parametric CADCAM Deconstruction Research
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 291-293
doi	https://doi.org/10.52842/conf.acadia.2009.291
summary	The deconstruction (DeCon) and repurposing (ReCon) of existing structures and materials are worthwhile and relevant endeavors given the potential for such procedures to be more economically and environmentally sustainable than conventional construction methods. Conventional construction methods often utilize virgin materials for the production of architecture, requiring extensive energy to harvest, process, and manufacture the materials for use. Today, we must face the fact that we exist in a carbon-sensitive economy, and demand design approaches that reduce architecture’s impact on the environment. Our goal was to develop a CADCAM ReCon design methodology that would have the potential to mitigate carbon consumption. To explore this goal, students engaged a design research project that looked for novel and innovative approaches to the DeCon and ReCon of an existing barn. The student researchers created parametric models and surface designs derived from the existing materials. The digitally fabricated tectonic design constructions resulted in economical, novel, and material-efficient design methodologies for DeCon and ReCon.
keywords	Fabrication, environment, CADCAM, Parametric Design
series	ACADIA
type	Short paper
email
last changed	2022/06/07 07:49

_id	cf2009_poster_09
id	cf2009_poster_09
authors	Hsu, Yin-Cheng
year	2009
title	Lego Free-Form? Towards a Modularized Free-Form Construction
source	T. Tidafi and T. Dorta (eds) Joining Languages Cultures and Visions: CAADFutures 2009 CD-Rom
summary	Design Media is the tool designers use for concept realization (Schon and Wiggins, 1992; Liu, 1996). Design thinking of designers is deeply effected by the media they tend to use (Zevi, 1981; Liu, 1996; Lim, 2003). Historically, architecture is influenced by the design media that were available within that era (Liu, 1996; Porter and Neale, 2000; Smith, 2004). From the 2D plans first used in ancient egypt, to the 3D physical models that came about during the Renaissance period, architecture reflects the media used for design. When breakthroughs in CAD/CAM technologies were brought to the world in the twentieth century, new possibilities opened up for architects.
keywords	CAD/CAM free-form construction, modularization
series	CAAD Futures
type	poster
last changed	2009/07/08 22:12

For more results click below: