Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 590

Reformat results as: short short into frame detailed detailed into frame

_id	acadia09_66
id	acadia09_66
authors	Menges, Achim
year	2009
title	Performative Wood: Integral Computational Design for Timber Constructions
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 66-74
doi	https://doi.org/10.52842/conf.acadia.2009.066
summary	Wood differs from most building materials in that it is a naturally grown biological tissue. Thus wood displays significant differentiation in its material makeup and structure as compared to most industrially produced, isotropic materials. Upon closer examination wood can be described as an anisotropic natural fiber system with different material characteristics and related behavior in different directions relative to the main grain orientation. Because of its differentiated internal capillary structure wood is also hygroscopic. It absorbs and releases moisture in exchange with the environment and these fluctuations cause differential dimensional changes. In architectural history the inherent heterogeneity of wood and the related more complex material characteristics have been mainly understood as a major deficiency by the related crafts, timber industry, engineers and architects alike. This paper will present an alternative design approach and associated computational design tools that aim at understanding wood’s differentiated material make up as its major capacity rather than a deficiency. Along two design experiments the related research on an integral computational design approach towards unfolding wood’s intrinsic material characteristics and performative capacity will be discussed. The first experiment explores the anisotropic characteristics of wood by exploiting the differential bending behavior in relation to the local induction of forces through which a specific overall morphology can be achieved. The second experiment focuses on the hygroscopic property of wood as the base for developing a surface structure that responds to changes in relative humidity with no need for any additional electronic or mechanical control.
keywords	Wood, materiality, prototype, performance, responsive design
series	ACADIA
type	Normal paper
email
last changed	2022/06/07 07:58

_id	acadia18_216
id	acadia18_216
authors	Ahrens, Chandler; Chamberlain, Roger; Mitchell, Scott; Barnstorff, Adam
year	2018
title	Catoptric Surface
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 216-225
doi	https://doi.org/10.52842/conf.acadia.2018.216
summary	The Catoptric Surface research project explores methods of reflecting daylight through a building envelope to form an image-based pattern of light on the interior environment. This research investigates the generation of atmospheric effects from daylighting projected onto architectural surfaces within a built environment in an attempt to amplify or reduce spatial perception. The mapping of variable organizations of light onto existing or new surfaces creates a condition where the perception of space does not rely on form alone. This condition creates a visual effect of a formless atmosphere and affects the way people use the space. Often the desired quantity and quality of daylight varies due to factors such as physiological differences due to age or the types of tasks people perform (Lechner 2009). Yet the dominant mode of thought toward the use of daylighting tends to promote a homogeneous environment, in that the resulting lighting level is the same throughout a space. This research project questions the desire for uniform lighting levels in favor of variegated and heterogeneous conditions. The main objective of this research is the production of a unique facade system that is capable of dynamically redirecting daylight to key locations deep within a building. Mirrors in a vertical array are individually adjusted via stepper motors in order to reflect more or less intense daylight into the interior space according to sun position and an image-based map. The image-based approach provides a way to specifically target lighting conditions, atmospheric effects, and the perception of space.
keywords	full paper, non-production robotics, representation + perception, performance + simulation, building technologies
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	ascaad2014_023
id	ascaad2014_023
authors	Al-Maiyah, Sura and Hisham Elkadi
year	2014
title	Assessing the Use of Advanced Daylight Simulation Modelling Tools in Enhancing the Student Learning Experience
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 303-313
summary	In architecture schools, where the ‘studio culture’ lies at the heart of students’ learning, taught courses, particularly technology ones, are often seen as secondary or supplementary units. Successful delivery of such courses, where students can act effectively, be motivated and engaged, is a rather demanding task requiring careful planning and the use of various teaching styles. A recent challenge that faces architecture education today, and subsequently influences the way technology courses are being designed, is the growing trend in practice towards environmentally responsive design and the need for graduates with new skills in sustainable construction and urban ecology (HEFCE’s consultation document, 2005). This article presents the role of innovative simulation modelling tools in the enhancement of the student learning experience and professional development. Reference is made to a teaching practice that has recently been applied at Portsmouth School of Architecture in the United Kingdom and piloted at Deakin University in Australia. The work focuses on the structure and delivery of one of the two main technology units in the second year architecture programme that underwent two main phases of revision during the academic years 2009/10 and 2010/11. The article examines the inclusion of advanced daylight simulation modelling tools in the unit programme, and measures the effectiveness of enhancing its delivery as a key component of the curriculum on the student learning experience. A main objective of the work was to explain whether or not the introduction of a simulation modelling component, and the later improvement of its integration with the course programme and assessment, has contributed to a better learning experience and level of engagement. Student feedback and the grade distribution pattern over the last three academic years were collected and analyzed. The analysis of student feedback on the revised modelling component showed a positive influence on the learning experience and level of satisfaction and engagement. An improvement in student performance was also recorded over the last two academic years and following the implementation of new assessment design.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	acadia17_102
id	acadia17_102
authors	Aparicio, German
year	2017
title	Data-Insight-Driven Project Delivery: Approach to Accelerated Project Delivery Using Data Analytics, Data Mining and Data Visualization
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 102-109
doi	https://doi.org/10.52842/conf.acadia.2017.102
summary	Today, 98% of megaprojects face cost overruns or delays. The average cost increase is 80% and the average slippage is 20 months behind schedule (McKinsey 2015). It is becoming increasingly challenging to efficiently support the scale, complexity and ambition of these projects. Simultaneously, project data is being captured at growing rates. We continue to capture more data on a project than ever before. Total data captured back in 2009 in the construction industry reached over 51 petabytes, or 51 million gigabytes (Mckinsey 2016). It is becoming increasingly necessary to develop new ways to leverage our project data to better manage the complexity on our projects and allow the many stakeholders to make better more informed decisions. This paper focuses on utilizing advances in data mining, data analytics and data visualization as means to extract project information from massive datasets in a timely fashion to assist in making key informed decisions for project delivery. As part of this paper, we present an innovative new use of these technologies as applied to a large-scale infrastructural megaproject, to deliver a set of over 4,000 construction documents in a six-month period that has the potential to dramatically transform our industry and the way we deliver projects in the future. This paper describes a framework used to measure production performance as part of any project’s set of project controls for accelerated project delivery.
keywords	design methods; information processing; data mining; big data; data visualization
series	ACADIA
email
last changed	2022/06/07 07:55

_id	caadria2009_017
id	caadria2009_017
authors	Bruton, Dean
year	2009
title	On Distributed Network Rendering Systems
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 65-74
doi	https://doi.org/10.52842/conf.caadria.2009.065
summary	This paper reports an investigation of the establishment and performance of a distributed computer rendering system for advanced computer graphics production within a centralized university information technology environment. It explores the proposal that the use of distributed computer rendering systems in industry and universities offers synergies for university-industry collaborative agreements. Claims that cluster computing and rendering systems are of benefit for computer graphics productions are to be tested within a standard higher education environment. A small scale distributed computer rendering system was set up to investigate the development of the optimum use of intranet and internet systems for computer generated feature film production and architectural visualisation. The work entailed using monitoring, comparative performance analysis and interviews with relevant stakeholders. The research provides important information for practitioners and the general public and heralds the initiation of a Centre for Visualization and Animation research within the School of Architecture, Landscape Architecture and Urban Design, University of Adelaide.
keywords	Render farm, processing, computer graphics, animation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2022_367
id	ecaade2022_367
authors	Doumpioti, Christina and Huang, Jeffrey
year	2022
title	Field Condition - Environmental sensibility of spatial configurations with the use of machine intelligence
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 2, Ghent, 13-16 September 2022, pp. 67–74
doi	https://doi.org/10.52842/conf.ecaade.2022.2.067
summary	Within computational environmental design (CED), different Machine Learning (ML) models are gaining ground. They aim for time efficiency by automating simulation and speeding up environmental performance feedback. This study suggests an approach that enhances not the optimization but the generative aspect of environmentally driven ML processes in architectural design. We follow Stan Allen's (2009) idea of 'field conditions' as a bottom-up phenomenon according to which form and space emerge from local invisible and dynamic connections. By employing parametric modeling, environmental analysis data, and conditional Generative Adversarial Networks [cGAN] we introduce a generative approach in design that reverses the typical design process of going from formal interpretation to analysis and encourages the emergence of spatial configurations with embedded environmental intelligence. We call it Intensive-driven Environmental Design Computation [IEDC], and we employ it in a case study on a residential building typology encountered in the Mediterranean. The paper describes the process, emphasizing dataset preparation as the stage where the logic of field conditions is established. The proposed research differentiates from cGAN models that offer automatic environmental performance predictions to one that spatial predictions stem from dynamic fields.
keywords	Field Architecture, Environmental Design, Generative Design, Machine Learning, Residential Typologies
series	eCAADe
email
last changed	2024/04/22 07:10

_id	acadia09_90
id	acadia09_90
authors	Fox, Michael
year	2009
title	Flockwall: A Full-Scale Spatial Environment with Discrete Collaborative Modules
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 90-97
doi	https://doi.org/10.52842/conf.acadia.2009.090
summary	The paper highlights a built example of a human-scale spatial environment composed of discrete collaborative modules. The primary goals were to develop and understand strategies that can be applied to interactive architecture. The design and construction were carried out in an academic context that was displayed to a public audience of approximately 200,000 people over the course of three days. In addressing the performance parameters of the prototype, the concept focused on several key strategies: 1) geometry 2) movement 3) connections 4) scale and 5) computational control, and human interaction. The final objective of the approach was to create an innovative design that was a minimally functional spatial environment with the capability for evolving additional multi-functionality. Heavy emphasis was placed on creating a full-scale environment that a person could walk through, interact with, and experience spatially.
keywords	Geometry, design logic, flock behavior, prototype, fabrication, responsive systems
series	ACADIA
type	Normal paper
email
last changed	2022/06/07 07:50

_id	acadia09_110
id	acadia09_110
authors	Gharleghi, Mehran; Sadeghy, Amin
year	2009
title	Adaptive Pneus
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 110-117
doi	https://doi.org/10.52842/conf.acadia.2009.110
summary	The research focuses on the performative capacities of a pneumatic material system in regards to the specific environmental conditions. The use of Adaptation as a mechanism to modulate environmental performance was the main focus of the design process and research. The location of the sun during the day acts as a trigger to adapt the system, allowing the system to passively augment the environmental conditions. A new form-finding method that combines digital and material processes has been the main method by which the experiments were undertaken. This approach necessitates a dramatic shift in the architectural design, from producing static to environmentally responsive objects. It requires a shift in thinking from buildings as static and non-active systems to material system existing over time within specific environments capable of complex environmental performances.
keywords	Responsive design, fabrication, prototyping, form finding, solar shading
series	ACADIA
type	Normal paper
email
last changed	2022/06/07 07:51

_id	sigradi2009_1204
id	sigradi2009_1204
authors	Monteiro, Ari; Eduardo Toledo Santos
year	2009
title	O Uso de Modelagem Generativa para Representação de Modulações de Alvenarias em Ferramentas BIM
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	One approach to perform the design for production of masonry with BIM tools is to explicitly represent the wall elements. However, this strategy decreases the application performance because of model complexity. Generative Modeling is a modeling paradigm aimed at defining rules and applying them for generating models. The masonry block placement is associated with a set of rules, making the use of generative modeling a viable solution to implicitly represent the blocks. This paper presents some preliminary results of our research on investigating if Generative Modeling can help in the representation of masonry modulation and for the proposal of a shape grammar for representing its basic elements.
keywords	modelagem generativa; gramática de forma; projeto para a produção; alvenaria; ferramentas BIM
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	cf2009_847
id	cf2009_847
authors	Rosenberg, Daniel
year	2009
title	Designing for the unpredictable: Novel model for the design of emergence through real-world behavior
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 847- 860
summary	Most current approaches to unpredictability, within architectural discourse, lie either in the design of unbuildable emergent shapes or in performance simulations to test already designed outcomes. Even though some recent explorations have enabled the construction of emergent shapes, the unpredictability of real-world behaviors as the rules’ source for the unpredictability of shape generation remains unexplored. This paper proposes a novel model for the design of unpredictable buildable shapes, based on real-world behaviors. Initially, current methodologies are studied in order to find how they deal with the unpredictability of shape generation and real-world behaviors. Finally, a comprehensive novel model is proposed and tested through an empirical experiment, to show how it can be applied in architecture.
keywords	Unpredictability, emergence, simulation, folding structures
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	ascaad2009_ahmed_sarhan
id	ascaad2009_ahmed_sarhan
authors	Sarhan, Ahmed and Peter Rutherford
year	2009
title	EDVIS-Game: A framework for utilizing game engine reporting agents for environmental design education and visualisation
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 205-214
summary	In recent years, the architectural design process has witnessed a demand for professionals who can resolve the highly complex social, cultural, technological, and economical issues associated with “Sustainable Design”. At present, many designers use environmental data generated from building performance simulation applications such as “Ecotect”. The wealth of data generated from such applications is often presented in a rather complicated format through graphs and tables, relying significantly on the designer’s expertise to read, analyze, interpret and correlate these data. This paper presents a framework for developing a method that helps design students and untrained professionals to visualise and understand the implications of these environmental data during the different stages of the design process. This method mainly targets students and designers who are not fully equipped to solidly interpret these complex data sets or use them in the decision-making process. The proposed method aims therefore to present relevant analysis of the environment-related data within the context of a simple, user-friendly virtual game environment, relying on embodied agents within the game engine to trigger events and actions performed by the users, and present pertinent data subsequently.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	cf2011_p060
id	cf2011_p060
authors	Sheward, Hugo; Eastman Charles
year	2011
title	Preliminary Concept Design (PCD) Tools for Laboratory Buildings, Automated Design Optimization and Assessment Embedded in Building Information Modeling (BIM) Tools.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 451-476.
summary	The design of laboratory buildings entails the implementation of a variety of design constraints such as building codes; design guidelines and technical requirements. The application of these requires from designers the derivation of data not explicitly available at early stages of design, at the same time there is no precise methodology to control the consistency, and accuracy of their application. Many of these constraints deal with providing secure environmental conditions for the activities inside laboratories and their repercussions both for the building occupants and population in general, these constraints mandate a strict control over the building‚Äôs Mechanical Equipment (MEP), in particular the Heating Ventilating and Air Conditioning (HVAC) system. Due to the importance of these laboratory designers are expected to assess their designs not only according spatial relationships, but also design variables such as HVAC efficiency, air pressure hierarchies, operational costs, and the possible implications of their design decisions in the biological safety of the facility. At this point in time, there are no practical methods for making these assessments, without having constant interaction with HVAC specialists. The assessment of laboratory design variables, particularly those technical in nature, such as dimensioning of ducts or energy consumption are usually performed at late stages of design. They are performed by domain experts using data manually extracted from design information, with the addition of domain specific knowledge, the evaluation is done mostly through manual calculations or building simulations. In traditional practices most expert evaluations are performed once the architectural design have been completed, the turn around of the evaluation might take hours or days depending on the methods used by the engineer, therefore reducing the possibility for design alternatives evaluation. The results of these evaluations will give clues about sizing of the HVAC equipment, and might generate the need for design reformulations, causing higher development costs and time delays. Several efforts in the development of computational tools for automated design evaluation such as wheel chair accessibility (Han, Law, Latombe, Kunz, 2002) security and circulation (Eastman, 2009), and construction codes (ww.Corenet.gov.sg) have demonstrated the capabilities of rule or parameter based building assessment; several computer applications capable of supporting HVAC engineers in system designing for late concept or design development exist, but little has been done to assess the capabilities of computer applications to support laboratory design during architectural Preliminary Concept Design(PCD) (Trcka, Hensen, 2010). Developments in CAD technologies such as Building Information Modeling (BIM) have opened doors to formal explorations in generative design using rule based or parametric modeling [7]. BIM represents buildings as a collection of objects with their own geometry, attributes, and relations. BIM also allows for the definition of objects parametrically including their relation to other model objects. BIM has enabled the development of automated rule based building evaluation (Eastman, 2009). Most of contemporary BIM applications contemplate in their default user interfaces access to design constraints and object attribute manipulations. Some even allow for the application of rules over these. Such capabilities make BIM viable platforms for automation of design data derivation and for the implementation of generative based design assessment. In this paper we analyze the possibilities provided by contemporary BIM for implementing generative based design assessment in laboratory buildings. In this schema, domain specific knowledge is embedded in to the BIM system as to make explicit design metrics that can help designers and engineers to assess the performance of design alternatives. The implementation of generative design assessments during PCD can help designers and engineers to identify design issues early in the process, reducing the number of revisions and reconfigurations in later stages of design. And generally improving design performance.
keywords	Heating ventilating and Air Conditioning (HVAC), Building Information Models (BIM), Generative Design Assessment
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2013_187
id	ecaade2013_187
authors	Tompson, Tim and Haeusler, M. Hank
year	2013
title	Investigating Tools for Multi-Stakeholder Decision Making to Improve the Spatial Performance in Transport Interchanges
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 233-242
doi	https://doi.org/10.52842/conf.ecaade.2013.1.233
wos	WOS:000340635300024
summary	Public transport interchanges often involve several stakeholders for planning and decision-making. As a result complexity leads to inefficient processes, leading to indecision, disruption, or costly delays. Consequently, the paper focuses on the application of tools for navigation and prioritization of opportunities in the need finding, fuzzy-front end, or mystery phase as introduced by Martin (2009). The paper outlines in a case study how a multi-stakeholder platform can progress from complete ambiguity in project definition through to clearly defined and understood projects that have a shared intent across the multi-stakeholder platform. These tools have been applied in a public transport context, by demonstrating the process of integrating digital innovation into various stakeholders through a participatory research process. The paper introduces the research background; discusses the hypothesis; outlines the case study; emphasizes its significance for multi-stakeholder decision-making and discusses the opportunities for the built environment.
keywords	Participatory design; soft-systems methodology; multi-stakeholder; urban planning; transport environment.
series	eCAADe
email
last changed	2022/06/07 07:58

_id	f4c5
id	f4c5
authors	Wang, Xiangyu; Schnabel, Marc Aurel (eds)
year	2009
title	Mixed Reality In Architecture, Design, And Construction
source	Springer 2009, XIV, 274 p., Hardcover ISBN: 978-1-4020-9087-5
summary	Mixed Reality is moving out of the research-labs into our daily lives. It plays an increasing role in architecture, design and construction. The combination of digital content with reality creates an exciting synergy that sets out to enhance engagement within architectural design and construction. State-of-the-art research projects on theories and applications within Mixed Reality are presented by leading researchers covering topics in architecture, design collaboration, construction and education. They discuss current projects and offer insight into the next wave of Mixed Reality possibilities. Written for: Practitioners, academics, researchers, and graduate students at universities, and industrial researchers who work with MR and digital media in design and construction Table of contents PREFACE, by Xiangyu Wang and Marc Aurel Schnabel; 1 MIXED REALITIES: Framing Mixed Realities, by Marc Aurel Schnabel; 2 MIXED REALITY IN DESIGN COLLABORATION: Approaches to Augmenting Virtual Design Environments with Reality, by Xiangyu Wang and Rui Chen; Communication in Augmented Reality Aided Architectural Design, by Hartmut Seichter; A Technological Review to Develop an AR-Based Design Supporting System, by Jin Won Choi; Exploring Presence and Performance in Mixed Reality-Based Design Space, by Xiangyu Wang and Mi Jeong Kim; 3 MIXED REALITY IN ARCHITECTURE: Mobile Architectural Augmented Reality, by Mark Billinghurst and Anders Henrysson; Augmented Reality Visualisation Facilitating the Architectural Process, by Bruce Hunter Thomas; Simulation of an Historic Building Using a Tablet Mixed Reality System, by Atsuko Kaga; Temporal Context and Concurrent Evaluation, by Jules Moloney; 4 MIXED REALITY IN CONSTRUCTION: Key Areas and Issues for Augmented Reality Applications on Construction Sites, by Phillip S Dunston and Do Hyoung Shin; Tracking Technologies for Outdoor Mixed Reality Applications, by Amin Hammad; Augmented 3D Arrows Reach their Limits in Automotive Environments, by Marcus Tönnis and Gudrun Klinker; 5 MIXED REALITY IN EDUCATION / LEARNING: Visualising Future Cities in the ETH Value Lab, by Remo Burkhard and Gerhard Schmitt; Interplay of Domains: New Dimensions of Design Learning in Mixed Realities, by Marc Aurel Schnabel; Debating Opportunities: Learning Design through Different Structures, by Thomas Kvan; POSTSCRIPT: Epilogue, by Marc Aurel Schnabel and Xiangyu Wang; Author Biographies; Glossary; References; Index.
keywords	architecture, design and construction, mixed reality
series	book
type	normal paper
email
more	http://www.springerlink.com/content/978-1-4020-9087-5
last changed	2009/03/06 11:51

_id	caadria2009_318
id	caadria2009_318
authors	Burke, Anthony
year	2009
title	Competing "Intelligences"
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 607-611
doi	https://doi.org/10.52842/conf.caadria.2009.607
summary	In this paper, the dominant definitions of intelligence are explored in order to establish a set of working principals towards the development of higher order computational design processes in architecture. A review of intelligence as it has been understood over the last 60 years since Alan Turing (1950) first asked the question “can machines think?” shows the question of intelligence is far from clearly understood. Principals of intelligence however can be identified within the neurophysiological and artificial intelligence (AI) communities that differ significantly from the notion of intelligence as it is commonly used in architecture typically relating to the phenomena of emergence and critical point material physics. While distinct, these definitions provide a foundation for understanding intelligence specifically in computational architecture at a moment when it is necessary to develop a foundational taxonomy of systems thinking and processes. Through critiquing the principals of intelligence as it is understood in these different discipline areas, the thesis of this paper is that it is possible to frame a productive general theory of intelligent systems applicable to design processes, while simultaneously distinguishing the goals of design oriented higher order computational systems from those goals of general Artificial Intelligence research.
keywords	Intelligence; computation; design; architecture
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia09_167
id	acadia09_167
authors	Flohr, Julie
year	2009
title	Digital Templates: Diagrams of Associations
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 167-173
doi	https://doi.org/10.52842/conf.acadia.2009.167
summary	This paper claims that a speculative design space exists within the crafting of digital rule-based associations in parametric modeling environments, which promises to support potent contemporary designs in architecture. In addition to reviewing some diagrammatic frameworks located within the techniques of associative design modeling, this paper also details a project for a research-oriented practice based on the development of a registry of digital diagrams called “re-usables.” Working with “re-usable templates” of association, a precise sequence of design logic is invented for each project, while some of its aspects are re-used and re-configured. Such practice aims to operate between the “one-off” world of the all-custom and the entirely reproducible world of “copy-paste.”
keywords	Parametric Design, Associative design, design logic, abstraction
series	ACADIA
type	Normal paper
email
last changed	2022/06/07 07:51

_id	ascaad2023_091
id	ascaad2023_091
authors	Haddad, Naif
year	2023
title	From Digital Heritage Documentation to 3D Virtual Reconstruction and Recreation for Heritage Promotion and Reinterpretation: The Case of the iHeritage Project
source	C+++: Computation, Culture, and Context – Proceedings of the 11th International Conference of the Arab Society for Computation in Architecture, Art and Design (ASCAAD), University of Petra, Amman, Jordan [Hybrid Conference] 7-9 November 2023, pp. 7-23.
summary	In the last two decades, the digital age Information and Communication Technologies (ICT) development and concerns combined with rapid technology have permitted the dissemination of different digital applications (including digital documentation, virtual reality (VR), augmented reality (AR), mixed reality (MR), digital gaming, and holograms etc.) oriented toward past, present and future communication using digital three-dimensional audio-visual content. Today, we must acknowledge that 3D virtual 3D reconstruction and recreation has become an established way to build, understand, reinterpret, and promote Cultural Heritage (CH). The virtual 3D reconstruction world and multimedia industry are often considered potential marketing channels for World Heritage Sites (WHS) and heritage tourism. 3D digital/virtual reconstruction merges and embodies subjectivity in one process, playing an attractive role in heritage tourism destinations and creating image experiences, providing the first enjoyable interpretation and information for most audiences. Based on the EU-funded iHERITAGE project ICT Mediterranean platform for the UNESCO CH, this paper attempts to examine some insights into constructing the optimistic image of heritage promotion and tourism in the context of CH as it flows through both physical and virtual spaces to give a glimpse of the future of virtual reconstruction. It illustrates the development of the concepts and practice, challenges and opportunities, advantages and disadvantages, and the negative and the positive sides of the related issues of only 3D digital reconstructions, and some issues concerning the ethics based on the International Chartres and Conventions mainly in the field of scientific visualisation, such as the London Charter (2009) and Seville Principles (2011). Finally, as a practical dimension, it presents some representative examples of 3D digital/virtual reconstruction of characteristic monuments of the WHS of Nabataean Petra in Jordan for the first time.
series	ASCAAD
email
last changed	2024/02/13 14:40

_id	sigradi2009_911
id	sigradi2009_911
authors	Teixeira, Fábio Gonçalves; Sérgio Leandro dos Santos
year	2009
title	VirtusCADE, um Sistema para o Design Virtual de Produtos [VirtusCADE, A system for virtual design of products]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	The knowledge of latest technology that allows the development of competitive products in reduced times is crucial to guarantee a sustainable growth of the national industry. This work presents the development of a computational system for the Virtual Design of products, the VirtusCADE, which is a CAD/CAE interactive software (Computer Aided Design/Computer Aided Engineering). The VirtusCADE includes 3D geometric modeling of surfaces and solids and mesh generation. The system uses the parametric modeling of surfaces, including algorithms for determination of intersection between surfaces and for triangular mesh generation in trimmed parametric surfaces. The graphical interface is interactive and allows the direct real time manipulation of objects (lines, surfaces and solids) in 3D using the OpenGL technology. The system prioritizes the usability, implementing several graphic tools that facilitate the manipulation in 3D. The VirtusCADE contemplates the structural simulation through the Finite Element Method. The code architecture is based on oriented object programming, which allows great scaling capability for the implementation of new tools. This project has great applicability in numerical simulation of physical phenomena, such structural analysis of buildings, vehicles parts, with impact in the industries of civil construction, metal-mechanics, aerospatial, naval and automotive.
keywords	Virtual Design; Geometric modeling; Finite elements
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	caadria2009_109
id	caadria2009_109
authors	Wang, Chung-yang
year	2009
title	Statics and Dynamics in The Process of CAD/CAM Fabrication
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 245-254
doi	https://doi.org/10.52842/conf.caadria.2009.245
summary	Through the progress of digital media, dynamic concepts contribute to vivid forms. Nevertheless, these forms still present static space, which cannot reflect the designer’s dynamic concept, a shape that changes over time. This is a setback for design and fabrication. Hence many researchers turn to designing dynamic architecture. However, the current development restricted by technical threshold is prone to solve the variation of functions instead of aesthetic-oriented changeable form. It is obvious that the difference between “statics” and “dynamics” becomes a watershed of aesthetics and functions. This research attempts to eliminate the above-mentioned barrier and to suggest a new CAD/CAM fabrication procedure based on aesthetics and reveal key tectonic factors that affect dynamic architecture.
keywords	CAD/CAM: Statics/Dynamics; Tectonics; Fabrications
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	ecaade2009_164
id	ecaade2009_164
authors	Arslan Selçuk, Semra; Gönenç Sorguç, Arzu
year	2009
title	Exploring Complex Forms in Nature Through Mathematical Modeling: a Case on Turritella Terebra
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 665-672
doi	https://doi.org/10.52842/conf.ecaade.2009.665
wos	WOS:000334282200080
summary	Changing paradigm of nature-architecture relationship has being directly affected from developing science and technologies as well as from the impact of biomimetic inventions in various man made designs. Our perception of forms and structures are also shifting through use of computational techniques. From this aspect, mathematical models can be considered as the first step to analyze the complex forms and structures in nature. In this paper it is aimed to initiate a platform in architecture which will serve for discussions to explore the potentials of these interactions under the impact of computational and information technologies, not only in terms of formal/visual way, but also extending to learn more about the formation process in nature.
keywords	Shells, learning from nature, seashells, mathematical modeling
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: