Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 351

Reformat results as: short short into frame detailed detailed into frame

_id	cf2011_p060
id	cf2011_p060
authors	Sheward, Hugo; Eastman Charles
year	2011
title	Preliminary Concept Design (PCD) Tools for Laboratory Buildings, Automated Design Optimization and Assessment Embedded in Building Information Modeling (BIM) Tools.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 451-476.
summary	The design of laboratory buildings entails the implementation of a variety of design constraints such as building codes; design guidelines and technical requirements. The application of these requires from designers the derivation of data not explicitly available at early stages of design, at the same time there is no precise methodology to control the consistency, and accuracy of their application. Many of these constraints deal with providing secure environmental conditions for the activities inside laboratories and their repercussions both for the building occupants and population in general, these constraints mandate a strict control over the building‚Äôs Mechanical Equipment (MEP), in particular the Heating Ventilating and Air Conditioning (HVAC) system. Due to the importance of these laboratory designers are expected to assess their designs not only according spatial relationships, but also design variables such as HVAC efficiency, air pressure hierarchies, operational costs, and the possible implications of their design decisions in the biological safety of the facility. At this point in time, there are no practical methods for making these assessments, without having constant interaction with HVAC specialists. The assessment of laboratory design variables, particularly those technical in nature, such as dimensioning of ducts or energy consumption are usually performed at late stages of design. They are performed by domain experts using data manually extracted from design information, with the addition of domain specific knowledge, the evaluation is done mostly through manual calculations or building simulations. In traditional practices most expert evaluations are performed once the architectural design have been completed, the turn around of the evaluation might take hours or days depending on the methods used by the engineer, therefore reducing the possibility for design alternatives evaluation. The results of these evaluations will give clues about sizing of the HVAC equipment, and might generate the need for design reformulations, causing higher development costs and time delays. Several efforts in the development of computational tools for automated design evaluation such as wheel chair accessibility (Han, Law, Latombe, Kunz, 2002) security and circulation (Eastman, 2009), and construction codes (ww.Corenet.gov.sg) have demonstrated the capabilities of rule or parameter based building assessment; several computer applications capable of supporting HVAC engineers in system designing for late concept or design development exist, but little has been done to assess the capabilities of computer applications to support laboratory design during architectural Preliminary Concept Design(PCD) (Trcka, Hensen, 2010). Developments in CAD technologies such as Building Information Modeling (BIM) have opened doors to formal explorations in generative design using rule based or parametric modeling [7]. BIM represents buildings as a collection of objects with their own geometry, attributes, and relations. BIM also allows for the definition of objects parametrically including their relation to other model objects. BIM has enabled the development of automated rule based building evaluation (Eastman, 2009). Most of contemporary BIM applications contemplate in their default user interfaces access to design constraints and object attribute manipulations. Some even allow for the application of rules over these. Such capabilities make BIM viable platforms for automation of design data derivation and for the implementation of generative based design assessment. In this paper we analyze the possibilities provided by contemporary BIM for implementing generative based design assessment in laboratory buildings. In this schema, domain specific knowledge is embedded in to the BIM system as to make explicit design metrics that can help designers and engineers to assess the performance of design alternatives. The implementation of generative design assessments during PCD can help designers and engineers to identify design issues early in the process, reducing the number of revisions and reconfigurations in later stages of design. And generally improving design performance.
keywords	Heating ventilating and Air Conditioning (HVAC), Building Information Models (BIM), Generative Design Assessment
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cf2009_173
id	cf2009_173
authors	Din, Edouard; Economou, Athanassios
year	2009
title	Emergent symmetries: visual computations – A group theoretical analysis of the Smith House by Richard Meier
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 173-187
summary	This work proposes the use of partial order lattices along with represent-ational schemes to account for patterns of ambiguity and emergence in the description of designs. The complexity of such designs is viewed as an aggregation of spatial layers that can all be decomposed by the subgroup relations of the symmetry of the configuration. At the end, this methodology points to a combinatorial approach that generates visual prototypes for future use in design synthesis. Here, Meier’s work is just a case study that validates the group theoretical approach.
keywords	Abstraction, partial order lattice, recombinant, visual prototype
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	ascaad2009_carl_lostritto
id	ascaad2009_carl_lostritto
authors	Lostritto, Carl R.
year	2009
title	Teaching Systems-Thinking with Algorithmic Process: Introduction to computation and programming with processing programming language
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 37-46
summary	This research investigates how algorithm design and scripting as pedagogy can affect generalized design ability and understanding. Logical, systematic thinking is considered foundational in developing architectural design aptitude and is explicit when designing algorithms. The course work presented mandates the construction of process rather than product. Scripting is implemented not as a means to an end but rather a medium for exploration. More valuable than formal generator or problem-solver, these scripted designs test direct aesthetic implications. Further tested is the role of animation in de-linearizing the design process. By isolating the algorithm as topic, technique, and concept, scripting skills and the produced artifact are extendable and are translatable to other media. Algorithm design is presented as a 2-dimensional but temporal endeavor: students script an animate, interactive vector-based image. This facilitates the transition from algorithm to spatial experience while also readying students for form-based explorations. The 2-d temporal exercise is of a similar order of complexity to a 3-dimensional static condition. Pieces of the animation structure are provided as a canvas, specifically the ability of the viewer to manually control a single parametric variable that affects the visual output through a user-interface element. The following and final project of the course expands upon the technique of scripting image in the design of an experience by collaging video, images and animation.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	caadria2009_091
id	caadria2009_091
authors	Pitts, Greg; Sambit Data
year	2009
title	Parametric Modelling of Architectural Surfaces
doi	https://doi.org/10.52842/conf.caadria.2009.635
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 635-644
summary	Parametric modelling is gaining in popularity as both a fabrication and design tool, but its application in the architectural design industry has not been widely explored. Parametric modelling has the ability to generate complex forms with intuitively reactive components, allowing designers to express and fabricate structures previously too laborious and geometrically complex to realise. This allows designers to address a project at both the macro and micro levels of resolution in the governing control surface and the individual repetitive component. This two level modelling control, of component and overall surface, can allow designers to explore new types of form generation subject to parametric constraints. Shading screens have been selected as the focus for this paper and are used as a medium to explore form generation within a given set of functional parameters. Screens can have many applications in a building but for the purpose of the following case studies, lighting quality and passive sun control are the main functional requirement. A set of screen components have been designed within certain shading parameters to create a generic component that can automatically adapt to any given climatic conditions. These will then be applied to surfaces of varying degrees of geometric complexity to be analysed in their ability to correctly tessellate and create a unified screening array true to the lighting requirements placed on the generic component.
keywords	Parametric Modelling: Screening; Design; Fabrication
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	ijac20097303
id	ijac20097303
authors	Taron, Joshua M.
year	2009
title	Interactive Hemostasis Modeling in Urban Network Design
source	International Journal of Architectural Computing vol. 7 - no. 3,375-387
summary	This paper describes a type of project that images a city as it might exist given the integration of hemostatic procedures within pedestrian networks during emergencies requiring full-scale egress from an urban core. It articulates the steps taken to integrate a pre-existing C++ hemostasis model (C. Jacob, 2008) into Maya software in order to describe how the project operates on a computational level. By projecting these agent-based logics directly into/onto each pedestrian in the city (the smallest unit of the system), egress-oriented infrastructure can shift from being extensively predetermined in form (concrete barriers, metal railing, police barricades, etc.), to something more intensively defined, real-time, and locally on-demand. These procedures are situated within a larger schema based on the structural principles of Norbert Wiener's cybernetic feedback loops, that acknowledge and allow for hybrid (top-down + bottom-up) awareness and control within systems. The project attempts to ally itself with emerging forms of network design with similar structural typologies supported through the use of personal mobile devices (PMDs) in urban environments.
series	journal
last changed	2009/10/20 08:02

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2009_065
id	caadria2009_065
authors	Li, Biao; Rong Li
year	2009
title	Optimal Organization of Architectural Spaces Based on Genetic Algorithm
doi	https://doi.org/10.52842/conf.caadria.2009.653
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 653-661
summary	Genetic algorithms categorized as global search heuristics are search technique of seeking approximate or exact solutions for optimizing problems. Our generative tool named notchSpace starts from a population of randomly generated individuals which rationally subdivide architectural spaces with a low “fitness”. During generations’ evolution, the population is recombined, modified and mutated at a low rate to form new modes of building spatial subdivision; a new population is used in the next iteration. NotchSpace works up a research platform to evolve architectural spaces, and it explores the thinking of translation from computer algorithms to the field of architecture.
keywords	Genetic algorithms; evolutions; fitness; crossover
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ascaad2009_tayeb_sahnoune
id	ascaad2009_tayeb_sahnoune
authors	Sahnoune, Tayeb and Brahim Nuibat
year	2009
title	Digital Design Tools and Case Study Reasoning
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 451-463
summary	This study investigates how the use of digital technology in general, and electronic information and automation, especially during the course of study and preparation of urban and architectural designs on the one hand, and analysis of the impact of these applications and uses of the media automation and information technology at various stages of Physical planning and architectural design of projects, on the other hand. The comparison between modern and traditional methods, to determine the positives and negatives of both sides on the economic (economy, effort, money and time) and technical, which includes (graphic representation: painting, measure, Quality, precision, colours, details and other ....). The answer to whether computer and digital development has invented, added, or nothing of substance to content of architecture and urban planning designs, or has enabled us to solve the urban and architectural problems related to social and cultural aspects. We have in this study, the city of _Boussa_da_ in the south of Algeria as an example, through which presentation and analysis of two types of field projects carried in our architectural office using; media techniques and various programs: (Architectural3.3/Accurender/Art-lantis...) mentioning That, the two projects have been completed and approved, and are now in the process of realisation. The first project represents a residential neighbourhood area of (82.65 ha), through the action plan and land uses called _Plan d_occupation des sols_ in Algeria, No.09, in order to create and prepare the new town for extension, establish administrative and commercial centre, and determine the nature of land use; (equipment, facilities and housing),for a population number estimated (12,264)inhabitants, and projected number of housing estimated at 2409 houses, with a density of 150 inhabitants / ha. The second project is to study the architecture of the 50 houses earmarked for social Tzhmia working group, formed 25 three-room apartment type with(67.00 m 2) and 25 four-room apartment type with(77.00m2). However, The study aims to identify the impact of automated information applications and information technology used at different stages of urban planning and architectural design of these projects under consideration by the comparison between the traditional design table, and electronic design table to determine the pros and cons of each one of these means on the one hand, and stages of concepts and design, On the other, before concluding to how to use the media automation and digital technology, trying to find a point of hugs between the means and tools of Planning and design, through the analysis of the historical path of each of these elements.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ecaadesigradi2019_508
id	ecaadesigradi2019_508
authors	Yenice, Yagmur and Park, Daekwon
year	2019
title	V-INCA - Designing a smart geometric configuration for dry masonry wall
doi	https://doi.org/10.52842/conf.ecaade.2019.2.515
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 515-520
summary	Soil is still used as a building material in many parts of the world, especially in rural areas. Approximately 30% of the world's population is still living in shelters made by soil (Berge 2009). One of the techniques is using soil in mudbrick form, which is sun dried instead of being fired in kilns. However, mud bricks have low compressive and tensile strength. Instead of enhancing the mix formula, we focus on designing the geometry of the brick itself to improve walls' overall compressive and tensile strength. The goal of the research is to explore an innovative way to build masonry walls through geometrical examination together with computer aided design. Unlike traditional horizontal laying of the rectangular brick elements, 3D designed blocks take advantage of gravity and foster an accelerated assembly without mortar. They create a balance point in the middle of the wall during the construction. The geometry of V-INCA blocks allows dry construction which will reduce the amount of time spent on the site. Load distribution and the friction between two surfaces are sufficient to have a dry construction. Thus, a wall built with V-INCA is stronger intrinsically due to its geometry.
keywords	Dry masonry construction; smart geometrical design; on-site material; compressed earth blocks; Inca masonry
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:57

_id	caadria2009_061
id	caadria2009_061
authors	Yoshikawa, Yasuyo; Kyoko Miyashita, Tomohiro Fukuda and Kenichi Sakai
year	2009
title	Verification of Possibility of Traditional House Use and The Strategy for The Revival of A Historical City
doi	https://doi.org/10.52842/conf.caadria.2009.055
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 55-64
summary	Recently, the number of vacant traditional townhouses has been increasing, as cities’ central districts decay. In this paper, aiming at the activation of a region by effective use of vacant traditional townhouses, a rented house use strategy is proposed. First of all, the current number and potential vacant traditional townhouses and the intentions of local residents and population of surrounding area concerning to their use are accurately surveyed. As a result, it becomes clear that the rented house use of vacant traditional townhouses is necessary and possible. Next, the investigation with current tenants in their negotiation processes with vacant house owners is executed. Furthermore, some approach cases online are searched, and as a result, the following 3 points can be said: (1) it is important to collect and organize information of the vacant traditional townhouses in order to facilitate the rented house use; (2) a trustful real estate broker is necessary; (3) to consider local population expectances and understanding is necessary. Finally, the result of these is received, it is proposed that the database of the vacant traditional townhouses with VR be constructed and it be opened for public access on the Internet. In addition, the establishment of the resident organization for the rented house use as a nucleus of the use promotion strategy is also proposed.
keywords	Historical city; investigation; vacant traditional townhouse; rented house use; VR
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	acadia09_234
id	acadia09_234
authors	Cantrell, Bradley E.; Yates, Natalie A.
year	2009
title	Abstraction Language: Digital/ Analog Dialogues
doi	https://doi.org/10.52842/conf.acadia.2009.234
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 234-239
summary	The connection between biological systems and machines is quickly becoming an important factor in designing the built environment. This paper explores the model of abstraction languages as a method to create communications between biological and mechanical systems, focusing on modes accessible to design professionals. The development of data and control abstraction in programming is explored in order to develop linkages between physical systems and digital interfaces. This examination looks at current methods of data conveyance for the built environment, and at pushing beyond these current methods to suggest a method of abstraction. The researchers are particularly interested in the ability of abstraction to compress ecological/biological complexity into accessible modules for responsive environments.
keywords	Abstraction, synthesis, processing, biological systems, responsive design
series	ACADIA
type	Normal paper
email
last changed	2022/06/07 07:54

_id	caadria2009_152
id	caadria2009_152
authors	Henriques, Gonçalo Castro
year	2009
title	Crafting New Artefacts
doi	https://doi.org/10.52842/conf.caadria.2009.205
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 205-214
summary	The craft of complex artefacts, questioning technological changes and reflecting social and cultural transformation used to be a common attitude in traditional artisans of the pre industrialized society. Traditional craftsman developed special knowledge and skills, implementing their own tools and techniques. After the industrial revolution, the main focus shifted to mass production, and the personalization of artefacts became labour intensive and more expensive. Simultaneously, with technical specialization and the fragmentation of knowledge, the designer’s, builder’s and manufacturer’s approach became more segregated. Currently, information technologies offer new opportunities to the craft of complex objects. The integration of digital process from conception to fabrication, can transform this situation, and as a result personalization is more affordable. Nevertheless, the introduction of these new techniques or tools is lacking a poetic synthesis for the use of technology, and the social and cultural implications that may result of this use. A competition for a public installation was an opportunity to use digital tools to conceive, manufacture and construct a complex structure with a small budget that would be impossible to attain using only traditional tools. At the same time, this project - genetic landscape- could be seen as a metaphor, alluding to the technological interference on the process of creating a new life, or a second nature.
keywords	expanding traditional tools; digital craft; complex geometry built-case
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	sigradi2009_667
id	sigradi2009_667
authors	Leão, Elisângela Conceição Dantas; Arivaldo Leão de Amorim
year	2009
title	Kirimurê: uma aplicação da Modelagem Geométrica na produção da Forma Arquitetônica [Kirimurê: an application of geometric modeling on the synthesis of Architectural Form]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	Kirimurê is as Brazilian Indian Tupinambás called the Baia de Todos os Santos. Around the bay developed a region with significant agricultural production, at a time Salvador was the main export port in the Southern Hemisphere. This economic strength and its export potential were greatly due to the saveiro, a small wooden vessel with sail propulsion, which dominated these waters for a long time. Testimony of the Bahia’s history, they had great influence in the culture of Bahia. Currently, these vessels are disappearing and with them the traditional techniques of shipbuilding, intangible heritage, held in memory of the master builders. This paper presents an experience in developing the architectural shape of a complex building using geometric modeling, to house this cultural heritage.
keywords	Saveiros; Reconcavo Baiano; Cultural Heritage; Ship-building; Geometric Modeling; Architectural Design
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	ascaad2014_023
id	ascaad2014_023
authors	Al-Maiyah, Sura and Hisham Elkadi
year	2014
title	Assessing the Use of Advanced Daylight Simulation Modelling Tools in Enhancing the Student Learning Experience
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 303-313
summary	In architecture schools, where the ‘studio culture’ lies at the heart of students’ learning, taught courses, particularly technology ones, are often seen as secondary or supplementary units. Successful delivery of such courses, where students can act effectively, be motivated and engaged, is a rather demanding task requiring careful planning and the use of various teaching styles. A recent challenge that faces architecture education today, and subsequently influences the way technology courses are being designed, is the growing trend in practice towards environmentally responsive design and the need for graduates with new skills in sustainable construction and urban ecology (HEFCE’s consultation document, 2005). This article presents the role of innovative simulation modelling tools in the enhancement of the student learning experience and professional development. Reference is made to a teaching practice that has recently been applied at Portsmouth School of Architecture in the United Kingdom and piloted at Deakin University in Australia. The work focuses on the structure and delivery of one of the two main technology units in the second year architecture programme that underwent two main phases of revision during the academic years 2009/10 and 2010/11. The article examines the inclusion of advanced daylight simulation modelling tools in the unit programme, and measures the effectiveness of enhancing its delivery as a key component of the curriculum on the student learning experience. A main objective of the work was to explain whether or not the introduction of a simulation modelling component, and the later improvement of its integration with the course programme and assessment, has contributed to a better learning experience and level of engagement. Student feedback and the grade distribution pattern over the last three academic years were collected and analyzed. The analysis of student feedback on the revised modelling component showed a positive influence on the learning experience and level of satisfaction and engagement. An improvement in student performance was also recorded over the last two academic years and following the implementation of new assessment design.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ijac20097306
id	ijac20097306
authors	Balakrishnan, Bimal; Kalisperis, Loukas N.
year	2009
title	Design Visualization:A Media Effects Approach
source	International Journal of Architectural Computing vol. 7 - no. 3, 415-427
summary	This paper proposes an integrative approach in the evaluative phase of the design process, incorporating concepts, methodologies and measurement strategies that are well established in media psychology. The paper suggests a variable-centered approach for conceptualizing visualization technologies and to evaluate their potential to simulate architectural experience. Psychophysiological measures are introduced to capture the affective component of the architectural experience facilitated by visualization tools such as virtual reality. These are important in order to empirically evaluate the experiential aspects of an architectural space through visualization. Ideas are illustrated with examples drawn from prior and ongoing research collaboration between an architectural visualization lab and a media effects research lab.
series	journal
last changed	2009/10/20 08:02

_id	ijac20097408
id	ijac20097408
authors	Biloria, Nimish; Valentina Sumini
year	2009
title	Performative Building Skin Systems: A Morphogenomic Approach Towards Developing Real-Time Adaptive Building Skin Systems
source	International Journal of Architectural Computing vol. 7 - no. 4, 643-676
summary	Morphogenomics, a relatively new research area, involves understanding the role played by information regulation in the emergence of diverse natural and artificially generated morphologies. Performative building skin systems as a bottom-up parametric formation of context aware interdependent, ubiquitously communicating components leading to the development of continually performative systems is one of the multi-scalar derivations of the aforementioned Morphogenomic understanding. The agenda of adaptations for these building skins specifically corresponds to three domains of adaptation: structural, behavioral and physiological adaptations resulting in kinetic adaptability, energy generation, conservation, transport and usage principles as well as material property based changes per component. The developed skins adapt in real time via operating upon ubiquitous communication and data-regulation protocols for sensing and processing contextual information. Computational processes and information technology based tools and techniques such as parametric design, real-time simulation using game design software, environmental information mapping, sensing and actuating systems coupled with inbuilt control systems as well as manufacturing physical models in collaboration with praxis form a vital part of these skin systems. These experiments and analysis based on developing intrinsic inter-dependencies between contextual data, structure and material logistics thus lay the foundation for a new era of continually performing, self powering, real-time adaptive intelligent building skin systems.
series	journal
last changed	2010/09/06 08:02

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cf2009_288
id	cf2009_288
authors	Bourbonnais, Sébastien
year	2009
title	L’invention possible des architectures numériques. Recours aux images: du modèle à la construction; The possible invention of digital architectures. Use of images: From a model to the construction
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 288-300
summary	Computer-Aided Design (CAD) has become more and more part of the common architectural practice. Some designers have explored (in the past) different aspects, especially formal ones, allowed by these new information technologies. This paper’s goal is to explore the invention that would be specific to this new architectural practice. The hypothesis is to go back to the specificity of the image and to examine its evolution. This analysis will be done with reference to the « cycle of images » of the French philosopher Gilbert Simondon, described by means of stages and levels. This particular way of thinking will allow us, besides an overview of all those images in a genetic diagram, to reveal what can enable the passage from one level to another. We call this : “invention”.
keywords	CAD, images, exploratory architectures
series	CAAD Futures
type	normal paper
email
last changed	2009/06/09 07:12

_id	ecaade2009_117
id	ecaade2009_117
authors	Burry, Jane; Holzer, Dominik
year	2009
title	Sharing Design Space: Remote Concurrent Shared Parametric Modeling
doi	https://doi.org/10.52842/conf.ecaade.2009.333
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 333-340
summary	This paper reports on research involving researchers and senior undergraduate students investigating the potential for sharing parametric digital design models via a central server using version control software for file sharing and locking. The innovation is introducing remote shared flexible modeling in very early design to observe firstly, the negotiation of protocols for working together in this environment and secondly the generative and constraining impacts of working in a flexible relational model with other unseen hands at work.
wos	WOS:000334282200040
keywords	collaborative design, digital modeling, parametric design, version control
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2009_831
id	sigradi2009_831
authors	Cabral Filho, José dos Santos
year	2009
title	Do Moderno ao Digital ao Não Moderno: a Relevância da Cibernética de Segunda Ordem para uma Arquitetura Brasileira [From modern to digital to non modern: the relevance of second order cybernetics for a Brazilian architecture]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	Brazilian society is marked by informality, by social plasticity and a predisposition towards game and play. These characteristics are opposed to the perspectival paradigm’s principles, which are the base of modern architecture. Therefore, a modernist practice in Brazil meets an extra level of difficulty because it has to cope with these rather playful aspects. If we consider the second-order cybernetics and its conversation theory, the plasticity that characterizes Brazilian culture may stop being an obstacle and, if coupled with digital technologies, may become the very basis for a truly modern Brazilian architectural practice.
keywords	Brazilian modern architecture; second order cybernetics; modernism; Brazil
series	SIGRADI
email
last changed	2016/03/10 09:47

For more results click below: