Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 593

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2009_021
id	caadria2009_021
authors	Ambrose, Michael A.
year	2009
title	BIM and Comprehensive Design Studio Education
doi	https://doi.org/10.52842/conf.caadria.2009.757
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 757-760
summary	Building Information Modeling (BIM) has the potential to fundamentally alter the way composition, scale and abstraction are addressed in today’s comprehensive design studio by displacing the primacy of abstract conventions of representation with a methodology based on systems thinking and virtual simulation. BIM viewed as provocateur of design education provides great potential for the critical analysis of how architectural design is taught. The design studio project reflects new ways of teaching and addressing BIM methods and processes, and critically evaluating their effects and possibilities on architectural production.
keywords	Education; design theory; design studies; animation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2009_964
id	sigradi2009_964
authors	Castriota, Leonardo Barci; Rezende
year	2009
title	Fotografia digital e imagens multi-perspectivas no estudo de sítios históricos [Digital photography and multi-perspective image in the study of historical sities]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	The creation of panoramic images for depicting urban landscape is a technique that has its origins in Antiquity. These images, which are known to represent large urban areas from multiple views, can be considered true works of art. Recently there has been a growing interest by some researchers, especially in the area of computer graphics, in the production of multi-perspective images for representing historic sites. However, the focus of these studies has been especially the computational aspects of this process, and there are few studies that address the impact and possibilities of these methodologies in historic preservation and urban planning. Realizing this shortcoming and considering the demand for a perspective more connected to cultural heritage, our proposal is to associate the excellent visual results of the multi-perspective images to the rich possibilities of computer simulation that can provide digital photography. The fact is that in recent years we have experienced technological innovations in the field of computer simulation that far exceeded our expectations. While most surveys of buildings are still based on the use of tape measure, pencil, paper and camera, the computer has become increasingly the main interface between the user and the information and is now the preferred instrument for the production and viewing of images, including the creation of virtual environments. Thus, this work seeks to explore the great potential which seems to exist in the combination of digital photography and the technique of multi-perspective image representation, which may provide new approaches and perspectives for the field of historic preservation. For that, we present a rapid and low cost methodology, developed in recent years, which generates orthophotos and metric multi-perspective images, useful for the analysis of built heritage and historic sites. In addition to that, we will also discuss further possible byproducts of this methodology, among which we could highlight the creation of three-dimensional models, and the analysis of building pathologies in combination with thermal photography. As a case study, we will present a representation of the Rua dos Caetés, a listed historic district in Belo Horizonte (MG), Brazil.
keywords	Photogametry; Digital Photography; Heritage; Conservation
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	ecaade2009_194
id	ecaade2009_194
authors	Tong, Togan; Aydin, Erdal Devrim; Pusat, S. Emre
year	2009
title	Animation vs. Simulation
doi	https://doi.org/10.52842/conf.ecaade.2009.803
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 803-808
summary	In his book “Cinema as an Art”, Rudolf Arnheim states that cinema (art) cannot achieve to realize the mechanical reproduction of the real (nature) because of technical limitations but also states that these limitations are compulsory for the production of art. According to Arnheim, these limitations cause artists to interpret the real (nature) and to materialize impressive expressions. Architecture presents its productions to its viewers (customers) using some kind of media, before materializing them in the physical world. The most common ones nowadays are technical drawings (perspectives), models, photographs and computer aided models and animations. The architect makes impressive expressions based on the technical limitations of the medium he/she uses. With the computer technology, simulation gives possibilities to the architect for presenting and experiencing his/her art very close to reality. Simulation is the best way to reproduce the reality mechanically, when it is compared to other mediums. In this study, simulation’s potential as an architectural presentation technique is examined through Arnheim’s vision and Rembrandt’s painting “Staalmeesters”.
wos	WOS:000334282200098
keywords	Simulation, animation, architectural presentation, interactivity
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade2009_110
id	ecaade2009_110
authors	van der Maas, David; Meagher, Mark; Abegg, Christian; Huang, Jeffrey
year	2009
title	Thermochromic Information Surfaces: Interactive Visualization for Architectural Environments
doi	https://doi.org/10.52842/conf.ecaade.2009.491
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 491-496
summary	In this paper we describe a series of nine prototypes that were constructed to explore the benefits and limitations of thermochromic ink as a material for the design of architectural information surfaces. Among the goals of the project were the identification of inexpensive fabrication methods that could be used to build thermochromic surfaces at the scale of a room. Our primary design concerns were the ability to communicate information about indoor climate, and the integration of the information surfaces in an architectural environment. We propose a method for building thermochromic surfaces based on printed circuit boards (PCB) that is cost-effective, highly precise, and allows the fabrication of large surfaces through tiling.
wos	WOS:000334282200059
keywords	Thermochromic display, interactive architecture, information visualization, fabrication process, communication
series	eCAADe
email
last changed	2022/06/07 07:58

_id	sigradi2009_890
id	sigradi2009_890
authors	Almeida, Fábio de
year	2009
title	Documentação e Comunicação Digital do Patrimônio Arquitetônico Moderno: Centro Técnico de Aeronáutica – CTA [Documentation and Communication Digital Architectural Heritage Classic: Aerospace Technical Center - CTA]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This paper intends to contribute for the analysis of the digital representation applied for documentation, communication and diffusion of architecture as cultural heritage, more specifically the production and communication of informations about buildings and sites of modern movement, arguing the possibilities and limits of this instrumental for the best understanding, recognition, evaluation and diffusion of the architecture on a historiographical perspective. As studies of cases, were selected buildings of an important technical center of aeronautic of Brazil, the CTA (Centro Técnico de Aeronáutica) in São José dos Campos, State of São Paulo.
keywords	surveying and reconstruction; Digital Heritage; Modern Movement
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2009_854
id	sigradi2009_854
authors	Antoniazzi, Asdrubal; Airton Cattani; Jaqueline Viel Caberlon Pedoni
year	2009
title	Procedimentos metodológicos para simulação computacional de ambientes históricos [Methodological procedures for computer simulation of historical surroundings]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This study aims to present a classification of methodological procedures for using computer programmes to simulate architectural historical heritage. Produced for a Master’s Degree dissertation in Architecture, the methodology was developed based on several analyses of applications, possibilities and restrictions, with the assistance of photogrammetric reconstruction and several computer-graphics programmes. The files generated enable production of animations recording the changes experienced by buildings at various historical periods. These procedures were applied to the simulation of several buildings around the Praça Dante Alighieri in the centre of Caxias do Sul, Rio Grande do Sul, demonstrating their appropriateness and effectiveness and also showing the potential of computer-simulation resources for the historical environment, both educationally and in appreciation of architectural heritage.
keywords	Three-dimensional geometric modelling; Computer simulation; Digital reconstruction; Historical environment
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2009_103
id	caadria2009_103
authors	Boeykens, Stefan; Herman Neuckermans
year	2009
title	Content Management Systems Versus Learning Environments
doi	https://doi.org/10.52842/conf.caadria.2009.285
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 285-294
summary	Schools and teachers increasingly apply Online Learning Environments for teaching and course management. In many cases, an existing platform is used to support the curriculum. At the K.U. Leuven in Belgium a campus-wide platform is provided, using a commercial Content Management System. At the same time, the Design and Building Methodology research group at the Department of Architecture, Urbanism and Planning developed a custom portal to organize Computer Aided Architectural Design courses and seminars. Integration of this portal into the university system was rather disappointing, since much of the flexibility and customizability was lost, without any chance of filling in the gaps. This article discusses the possibilities and limitations of existing web-based systems to support Computer Aided Architectural Design teaching and reports on our own experiences from the last decade. A comparison of selected systems is juxtaposed with the requirements derived from these experiences.
keywords	Education; CMS; LMS; CAAD
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ijac20097402
id	ijac20097402
authors	Grobman, Yasha Jacob; Abraham Yezioro; Isaac Guedi Capeluto
year	2009
title	Computer-Based Form Generation in Architectural Design - a Critical Review
source	International Journal of Architectural Computing vol. 7 - no. 4, 535-554
summary	The idea of using computers for form generation and evaluation in the architectural design process has been put forward already in the early days of computers. However, as opposed to computer aided drafting, the generation of form, its optimization and manufacturing has not been widely accepted and implemented by practitioners. The paper critically reviews the research and state of the practice experiments that has been done in this field and develops an argument regarding the possibilities and limitations of computer-based form generation in the architectural design process.
series	journal
last changed	2010/09/06 08:02

_id	cf2009_259
id	cf2009_259
authors	Janssen, Patrick H. T.
year	2009
title	An evolutionary system for design exploration
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 259-272
summary	This paper reports on the development of a multi-objective evolutionary developmental design environment, called EDDE. The goal of the system is to make it easier for designers to use evolutionary techniques to explore design possibilities. The system consists of a generic evolutionary core into which a set of design specific scripts need to be plugged in. The system uses a web based client-server architecture that can either be run on a single computer or on multiple computers in parallel. Initial experiments have shown the system to be effective in evolving designs.
keywords	Generative, evolutionary, genetic, search, optimisation, simulation
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	f4c5
id	f4c5
authors	Wang, Xiangyu; Schnabel, Marc Aurel (eds)
year	2009
title	Mixed Reality In Architecture, Design, And Construction
source	Springer 2009, XIV, 274 p., Hardcover ISBN: 978-1-4020-9087-5
summary	Mixed Reality is moving out of the research-labs into our daily lives. It plays an increasing role in architecture, design and construction. The combination of digital content with reality creates an exciting synergy that sets out to enhance engagement within architectural design and construction. State-of-the-art research projects on theories and applications within Mixed Reality are presented by leading researchers covering topics in architecture, design collaboration, construction and education. They discuss current projects and offer insight into the next wave of Mixed Reality possibilities. Written for: Practitioners, academics, researchers, and graduate students at universities, and industrial researchers who work with MR and digital media in design and construction Table of contents PREFACE, by Xiangyu Wang and Marc Aurel Schnabel; 1 MIXED REALITIES: Framing Mixed Realities, by Marc Aurel Schnabel; 2 MIXED REALITY IN DESIGN COLLABORATION: Approaches to Augmenting Virtual Design Environments with Reality, by Xiangyu Wang and Rui Chen; Communication in Augmented Reality Aided Architectural Design, by Hartmut Seichter; A Technological Review to Develop an AR-Based Design Supporting System, by Jin Won Choi; Exploring Presence and Performance in Mixed Reality-Based Design Space, by Xiangyu Wang and Mi Jeong Kim; 3 MIXED REALITY IN ARCHITECTURE: Mobile Architectural Augmented Reality, by Mark Billinghurst and Anders Henrysson; Augmented Reality Visualisation Facilitating the Architectural Process, by Bruce Hunter Thomas; Simulation of an Historic Building Using a Tablet Mixed Reality System, by Atsuko Kaga; Temporal Context and Concurrent Evaluation, by Jules Moloney; 4 MIXED REALITY IN CONSTRUCTION: Key Areas and Issues for Augmented Reality Applications on Construction Sites, by Phillip S Dunston and Do Hyoung Shin; Tracking Technologies for Outdoor Mixed Reality Applications, by Amin Hammad; Augmented 3D Arrows Reach their Limits in Automotive Environments, by Marcus Tönnis and Gudrun Klinker; 5 MIXED REALITY IN EDUCATION / LEARNING: Visualising Future Cities in the ETH Value Lab, by Remo Burkhard and Gerhard Schmitt; Interplay of Domains: New Dimensions of Design Learning in Mixed Realities, by Marc Aurel Schnabel; Debating Opportunities: Learning Design through Different Structures, by Thomas Kvan; POSTSCRIPT: Epilogue, by Marc Aurel Schnabel and Xiangyu Wang; Author Biographies; Glossary; References; Index.
keywords	architecture, design and construction, mixed reality
series	book
type	normal paper
email
more	http://www.springerlink.com/content/978-1-4020-9087-5
last changed	2009/03/06 11:51

_id	ascaad2014_023
id	ascaad2014_023
authors	Al-Maiyah, Sura and Hisham Elkadi
year	2014
title	Assessing the Use of Advanced Daylight Simulation Modelling Tools in Enhancing the Student Learning Experience
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 303-313
summary	In architecture schools, where the ‘studio culture’ lies at the heart of students’ learning, taught courses, particularly technology ones, are often seen as secondary or supplementary units. Successful delivery of such courses, where students can act effectively, be motivated and engaged, is a rather demanding task requiring careful planning and the use of various teaching styles. A recent challenge that faces architecture education today, and subsequently influences the way technology courses are being designed, is the growing trend in practice towards environmentally responsive design and the need for graduates with new skills in sustainable construction and urban ecology (HEFCE’s consultation document, 2005). This article presents the role of innovative simulation modelling tools in the enhancement of the student learning experience and professional development. Reference is made to a teaching practice that has recently been applied at Portsmouth School of Architecture in the United Kingdom and piloted at Deakin University in Australia. The work focuses on the structure and delivery of one of the two main technology units in the second year architecture programme that underwent two main phases of revision during the academic years 2009/10 and 2010/11. The article examines the inclusion of advanced daylight simulation modelling tools in the unit programme, and measures the effectiveness of enhancing its delivery as a key component of the curriculum on the student learning experience. A main objective of the work was to explain whether or not the introduction of a simulation modelling component, and the later improvement of its integration with the course programme and assessment, has contributed to a better learning experience and level of engagement. Student feedback and the grade distribution pattern over the last three academic years were collected and analyzed. The analysis of student feedback on the revised modelling component showed a positive influence on the learning experience and level of satisfaction and engagement. An improvement in student performance was also recorded over the last two academic years and following the implementation of new assessment design.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ijac20097408
id	ijac20097408
authors	Biloria, Nimish; Valentina Sumini
year	2009
title	Performative Building Skin Systems: A Morphogenomic Approach Towards Developing Real-Time Adaptive Building Skin Systems
source	International Journal of Architectural Computing vol. 7 - no. 4, 643-676
summary	Morphogenomics, a relatively new research area, involves understanding the role played by information regulation in the emergence of diverse natural and artificially generated morphologies. Performative building skin systems as a bottom-up parametric formation of context aware interdependent, ubiquitously communicating components leading to the development of continually performative systems is one of the multi-scalar derivations of the aforementioned Morphogenomic understanding. The agenda of adaptations for these building skins specifically corresponds to three domains of adaptation: structural, behavioral and physiological adaptations resulting in kinetic adaptability, energy generation, conservation, transport and usage principles as well as material property based changes per component. The developed skins adapt in real time via operating upon ubiquitous communication and data-regulation protocols for sensing and processing contextual information. Computational processes and information technology based tools and techniques such as parametric design, real-time simulation using game design software, environmental information mapping, sensing and actuating systems coupled with inbuilt control systems as well as manufacturing physical models in collaboration with praxis form a vital part of these skin systems. These experiments and analysis based on developing intrinsic inter-dependencies between contextual data, structure and material logistics thus lay the foundation for a new era of continually performing, self powering, real-time adaptive intelligent building skin systems.
series	journal
last changed	2010/09/06 08:02

_id	cf2009_119
id	cf2009_119
authors	Boeykens, Stefan; Neuckermans, Herman
year	2009
title	Architectural design analysis, historical reconstruction and structured archival using 3D models: Techniques, methodology and long term preservation of digital models
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 119-132
summary	With the increased usage of 3D modeling, visualization, simulation and Building Information Modeling, architects produce 3D models, both for new designs and for historic reconstructions. However, these models are seldom shared to transfer structured information about the project. Even if they are exchanged, they are often not usable outside of their original design application. Additionally, digital archives with architectural content can not easily provide structured information about these 3D models, limiting their usefulness. This article discusses an approach to provide better structured models, using a combination of a sound methodology, the application of open file formats and additional metadata creation.
keywords	CAAD, design analysis, reconstruction, archival, preservation
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2009_174
id	caadria2009_174
authors	Chen, Chiung-Hui
year	2009
title	A Prototype Using Multi-Agent Based Simulation in Spatial Analysis and Planning
doi	https://doi.org/10.52842/conf.caadria.2009.513
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 513-521
summary	Pedestrian’s movements and spatial cognition in urban environments are main issues for urban designers in urban spatial planning and analysis. This paper aims to study interactions between a behavioural model of pedestrians and urban spaces. The pedestrians can be represented by an agent program, and behavioural reactions of walking agents under different stimulus can be further simulated. Thus, this study suggests that, a correlation study on pedestrian behaviours and spatial environments become the criterion for urban designers in order to help them create better flows.
keywords	Spatial analysis, multi-agent, behaviour, simulation
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	sigradi2009_2001
id	sigradi2009_2001
authors	Corradi, Eduardo Marotti; Gabriela Celani
year	2009
title	O "túnel de vento" - um exercício de projeto baseado em técnicas de animação [The "Wind Tunnel" - A Design Exercise Based in Animation Techniques]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	The objective of the present research was to study the use of animation techniques as a tool for the design process. The study started with a literature review about the different possible applications of animation techniques in architectural design. Four main categories of applications were found: (1) space representation and “walk through”, (2) simulation of articulated elements and kinetic structures, (3) visualization and analysis of functional aspects of the buildings, such as circulation and fire escape, and finally (4) the generation of novel shapes. The second part of the research consisted of a design exercise in which animation techniques were used to generate a shape. For this purpose a wind simulator was used in 3DMAX. Next, Paracloud software was used to automatically generate a rib structure that allowed to produce a scale model of the shape with a laser cutter.
keywords	Animation; design process; digital fabrication
series	SIGRADI
type	normal paper
email
last changed	2016/03/10 09:49

_id	ecaade2022_367
id	ecaade2022_367
authors	Doumpioti, Christina and Huang, Jeffrey
year	2022
title	Field Condition - Environmental sensibility of spatial configurations with the use of machine intelligence
doi	https://doi.org/10.52842/conf.ecaade.2022.2.067
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 2, Ghent, 13-16 September 2022, pp. 67–74
summary	Within computational environmental design (CED), different Machine Learning (ML) models are gaining ground. They aim for time efficiency by automating simulation and speeding up environmental performance feedback. This study suggests an approach that enhances not the optimization but the generative aspect of environmentally driven ML processes in architectural design. We follow Stan Allen's (2009) idea of 'field conditions' as a bottom-up phenomenon according to which form and space emerge from local invisible and dynamic connections. By employing parametric modeling, environmental analysis data, and conditional Generative Adversarial Networks [cGAN] we introduce a generative approach in design that reverses the typical design process of going from formal interpretation to analysis and encourages the emergence of spatial configurations with embedded environmental intelligence. We call it Intensive-driven Environmental Design Computation [IEDC], and we employ it in a case study on a residential building typology encountered in the Mediterranean. The paper describes the process, emphasizing dataset preparation as the stage where the logic of field conditions is established. The proposed research differentiates from cGAN models that offer automatic environmental performance predictions to one that spatial predictions stem from dynamic fields.
keywords	Field Architecture, Environmental Design, Generative Design, Machine Learning, Residential Typologies
series	eCAADe
email
last changed	2024/04/22 07:10

_id	caadria2009_146
id	caadria2009_146
authors	Fagerström, Gustav
year	2009
title	Dynamic Relaxation of Tensegrity Structures
doi	https://doi.org/10.52842/conf.caadria.2009.553
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 553-562
summary	The structural hierarchy inherent to tensegrities enables a building skin that performs on multiple levels simultaneously. While having one function in the global building mechanics, its individual components can work as self-contained systems balancing tensile and compressive forces locally within them. The behavior of elements under load is linear and thus describable analytically. When these are aggregated in a tensegrity however, the performance of the assembly as a whole is non-linear. In order to investigate further these relationships a method of dynamic relaxation will be developed. This tool allows for simulation and load analysis of a complex tensegrous network, based on the relationships between force, stiffness and dimension formulated by Young and the computational means provided by a parametric/associative modeling environment. This research investigates the possible formfinding through computational means of a double-layer tensegrity grid.
keywords	Dynamic; relaxation; tensegrity; form finding
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ascaad2009_samir_foura
id	ascaad2009_samir_foura
authors	Foura, Samir and Samira Debache
year	2009
title	Thermal Simulation In Residential Building Within Computer Aided Architectural Design: Integrated model
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 235-243
summary	Nowadays, the architectural profession is seeking a better energy saving in the design of buildings. The fear of energy shortage in the very near future, together with the rapid rise in energy prices, put pressure on researchers on this field to develop buildings with more efficient heating systems and energy systems. This work is concerned mainly with the development of a software program analyzing comfort in buildings integrated in CAD architectural systems. The problem of presenting the computer with information concerning the building itself has been overcome through integration of thermal analysis with the building capabilities of CAD system. Mainly, such experience concerns the rules for calculating heat loss and heat gain of buildings in Algeria, The program has been developed in order to demonstrate the importance of the innovation of the computer aided-architectural-design field (CAAD) in the technology of buildings such as the three dimensional modeling offering environmental thermal analysis. CAAD is an integrated architectural design system which can be used to carry out many tasks such as working drawings, perspectives and thermal studies, etc., all from the same data. Results are obtained in tabular form or in graphical output on the visual display. The principle of this program is that all input data should be readily available to the designer at the early stages of the design before the user starts to run the integrated model. Particular attention is given to the analysis of thermal aspects including solar radiation gains. Average monthly energy requirement predictions have been estimated depending on the building design aspect. So, this integrated model (CAAD and simulation comfort) is supposed to help architects to decide on the best options for improving the design of buildings. Some of these options may be included at the early design stages analysis. Indications may also be given on how to improve the design. The model stored on CAAD system provides a valuable data base for all sort analytical programs to be integrated into the system. The amount of time and expertise required to use complex analytical methods in architectural practice can be successfully overcome by integration with CAAD system.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	cf2009_487
id	cf2009_487
authors	Gursel, Ipek; Sariyildiz, Sevil; Stouffs, Rudi and Akin, Ömer
year	2009
title	Contextual ontology support as external knowledge representation for building information modelling
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 487- 500
summary	There is an increasing awareness of formal ontologies in knowledge-intense problem domains in the AEC industry. This paper analyzes the general use of ontologies, points to the importance of context-dependent ontology descriptions in AEC, and describes the use and management of multiple (external) ontologies as knowledge management tools within a complex information model of a building performance assessment tool CLIP (Computational support for Lifecycle Integral Performance assessment), previously developed by the authors. The paper provides a discussion of our approach, analysis of the benefits and limitations of external ontologies, suggestions for further development and research areas for the integration of multiple AEC knowledge representations.
keywords	Building lifecycle performance assessment, knowledge modeling, contextual ontologies, product models
series	CAAD Futures
email
last changed	2009/06/08 20:53

For more results click below: