Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 203

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2009_093
id	ecaade2009_093
authors	Elkær, Tim Nøhr
year	2009
title	Using Computers to Aid Creativity in the Early Stages of Design – or Not!: Rehabilitating the 2D/3D physical representation in Computer-Aided-Ideation
doi	https://doi.org/10.52842/conf.ecaade.2009.761
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 761-768
summary	The introduction of Rapid Prototyping technology such as 3D printers and diverse Numerically Controlled machines such as laser cutters and milling machines, has made it obvious for many educational institutions, that a paradigm shift is occurring these years, that will forever change the design- and architectural practice, - for better or worse. This paper discusses the current change of role and status of the representation as a means to communicate design in the digital era. It outlines two opposite directions for the development of software technology, and brings forward previous and current research, on the didactic aspects of introducing digital software into the curriculum of architecture and design education. The paper describes a workshop held at the Danish Design School, where students proficient in using digital media, were challenged to use analogue models instead, to rediscover and utilize some of the creative potentials offered by this medium. Two other workshops discussing similar themes with different foci and different participants have been held since. One hosted by the Glass & Ceramic School on Bornholm, where the students are trained as traditional Craftsmen and another hosted by Nordes2009 at AHO in Oslo, where the participants came with a background in the research community. My own research interest lies in establishing or refueling a discussion on the importance of the ambiguity in a physical representation, as opposed to the finite interpretations offered by the digital modeling environment, that the profession is accustomed to work within. This interest has recently been confirmed and renewed by reading “The (soft) Architecture Machine(s)” from 1970+75 and by studying the works of Professor Julio Bermudez and Professor Bennett Neiman.
wos	WOS:000334282200092
keywords	Ideation, representation, ambiguity, heuristics, design education
series	eCAADe
email
last changed	2022/06/07 07:55

_id	sigradi2009_697
id	sigradi2009_697
authors	Geva, Anat; Anuradha Mukherji
year	2009
title	Frank Lloyd Wright’s Treatment of Light in Unity Temple: Digital Model and Simulations
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	The paper demonstrates the utility of digital models and simulations in the study of light in sacred architecture. Specifically, it applied this method and analyses on Frank Lloyd Wright’s treatment of light in Unity Temple, Oak Park, Illinois (1905). The findings of the light simulations augmented the observation and qualitative analyses of Wright’s lighting design and show that his treatment of light fulfilled the accentuated, architectural, and celebration lighting recommendations of IES, while the task lighting of reading was partially fulfilled. Still, Wright’s original design provided the dramatic effect of light and shadows and enhanced the spiritual experience in the Temple.
keywords	Light simulations; Frank Lloyd Wright; Unity Temple
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	cf2009_700
id	cf2009_700
authors	Lee, Juhyun; Song, Jeong Hwa and Oh, Kunsoo
year	2009
title	RFID applications in a building project
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 700- 712
summary	As a new paradigm for construction in the ubiquitous era, IT Technology like RFID is an emerging issue in the building industry. For the purpose of RFID technology application in the building industry, this research suggests the Information Lifecycle Management using RFID technology in apartment building project and deals with the context-aware scenario for RFID technology application. The final objective of the research intends to develop the RFID application for the construction industry. From the tagging nodes at the material manufacture stage to the reading nodes at the end stage of the construction process, the flow of the RFID information deals with the synthetic application connecting physical construction material with electronic RFID information for the management. Furthermore, we suggest how to systematize, distribute and manage the construction material with the Information Lifecycle Management.
keywords	RFID, management, material, scenario, lifecycle
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	ascaad2009_mohamed_abdalla
id	ascaad2009_mohamed_abdalla
authors	Abdalla, Mohamed Saad Atia
year	2009
title	3D Model and Decision Support System for Fire Safety: A case study of Kingdom of Bahrain
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 419-430
summary	Fire agencies on all levels try hard to save lives, properties, and natural resources. Accurate access to critical information is essential in this regard, many agencies around the world have embraced GIS as a tool that helps them balance needs, uses, and hazards to promote sustainability of the environment while identifying and limiting vulnerability. At Kingdom of Bahrain, Ministry of interior established the Geographic Security System (GSS) to enhance the emergency response. The 3D of the GSS Consisted of 3 main parts: (1) 3D for terrain model, (2) 3D model for entire targeted zones, and (3) 3D models for individual buildings. In this paper, the integration between GSS system and 3D model will be illustrated, and how this kind of integration could enhance decision support system (DSS) for fire safety at kingdom of Bahrain. On other hand, we will highlight the technical and legislation difficulties faced in this project. Also, the future steps to enhance DSS will be discussed.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	sigradi2009_1086
id	sigradi2009_1086
authors	Abdelhameed, Wael; Yoshiro Kobayashi
year	2009
title	Urban Wiki: An online urban design system
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This research involves the framework and design of Urban Wiki, an online urban design system employing Wiki concept. The term Urban Wiki is created by the researchers; its concepts and methodology will be introduced and presented. Urban Wiki aims to creating a networking system of urban designs, enabling the collaborative work between users around the world. The presented system framework is created and tested by the researchers from two different locations in the world. The purpose of the research is to study how the users can share effectively designing/modeling large scale urban projects. An urban project of a village scale is used to demonstrate the potentials of Urban Wiki, presenting its functions and highlighting the possible uses in the urban area. Moreover, using the created models opens up various urban paths of designing, decision-making, and sharing. Techniques employed in the design of Urban Wiki can potentially be used to build up scalable, easily navigable and extensible models of large-scale entities.
keywords	Urban design; urban planning; networking; urban wiki; modeling systems
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cf2009_poster_07
id	cf2009_poster_07
authors	Ashraf, Mohamed-Ahmed and Pierre Côté
year	2009
title	The Impact of Three Cognitive Functions on Digital Media Aided Architectural Ideation: A Proposed Investigation
source	T. Tidafi and T. Dorta (eds) Joining Languages Cultures and Visions: CAADFutures 2009 CD-Rom
summary	From a cognitivist perspective the architectural design seen as an iterative process of search for an “acceptable” solution from initial design assumptions (Simon 1974) requires representation. These representation which may be internal (mental/cognitive activities) and external (sketches 3D models) are essential to any creative act and in all phases of the design process since they constitute a projection of the architect’s thought and know-how.
keywords	Cognitive function, ideation
series	CAAD Futures
type	poster
email
last changed	2009/07/08 22:12

_id	ijac20097106
id	ijac20097106
authors	Brown, Andre; Saeed, Ghousia; Knight, Michael
year	2009
title	Finding Your Way Around Heritage Sites: the Delivery of Digital Information to Mobile Devices
source	International Journal of Architectural Computing vol. 7 - no. 1, 105-120
summary	An information enriched 3D digital city model connected wirelessly with the real-time user interaction has the potential to deliver an effective piece in the pervasive computing jigsaw. Real-time location awareness can contribute to the effective delivery of 3D digital city models and associated information to small mobile devices. Location awareness is also one of the vital elements of ubiquitous computing systems; together the mobile hardware and its interactive contents can be thought of as 'everyware'. This paper describes the work - undertaken with different technological systems that have potential for pedestrian location sensing connecting the pedestrian user with real and virtual environments simultaneously. In particular we look at how users can be correctly located and efficiently informed about buildings and artefacts that are part of the spectrum of built forms that together are referred to as Architectural Heritage sites.
series	journal
last changed	2009/06/23 08:07

_id	ascaad2009_andrea_cammarata
id	ascaad2009_andrea_cammarata
authors	Cammarata, Andrea
year	2009
title	Rebuilding Architecture: An analysis and critical investigation practice
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 121-134
summary	The Cooperative Design Environment Laboratory (CoDE Lab) is carrying out a research with students, trainees and seniors who have previously participated to CAAD-assisted design courses. These courses were developed with the aim of making participants independent from the pre-analytical phase project to the renderings of the final artifact. The programs that have been used so far are Autodesk Revit, Graphisoft Archicad and Nemetschek Allplan.The teaching workgroup has always believed that analyzing, deconstructing and reconstructing the architecture teaches much in terms of understanding. If the process is done correctly, it entirely re-traces the creative dynamics developed by the original designer. Subsequently, the educational practice is to choose a notable architectural work, designed and/or created by a Master of architecture, and to reproduce it in all details: aesthetical-formal, morphological, technological, structural, modular, etc. The final result is an archive of well-developed reconstructed models of great specific interest. The students on the other hand thoroughly learn how to control the tools and all BIM planning procedures.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	caadria2009_000
id	caadria2009_000
authors	Chang, Teng-Wen; Eric Champion, Sheng-Fen Chien and Shang-Chia Chiou(eds.)
year	2009
title	CAADRIA 2009 - Between Man and Machine
doi	https://doi.org/10.52842/conf.caadria.2009
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, 795p.
summary	Digital designing takes place through processes of interaction between human designers and computers. As such, its location is the in-between, a shared realm of conversation where capabilities of both man and machine are amplified. CAADRIA 2009 addresses this conversation in terms of three perspectives that drive both research and practice in the computer-aided architectural design field: Digital design as integrating, intuitive and intelligent. CAADRIA 2009 aimed to provide a forum in which ideas pertaining to these notions can be explored, discussed and developed. l Digital design is integrative. With the diverse and fast speed of the global economy in the 21st century, the barrier between different disciplines is being overcome digitally. The integration of multiple disciplines is crucial for facing the next wave of global challenges. l Digital Design is intuitive. With advanced computational technology, how humans will cooperate with machines after the computing era will surely become the next challenge for all computational design-related researchers. Intuitive interaction or computing design is the second theme addressed in CAADRIA 2009. l Digital Design is Intelligent. With artificial intelligence, design intelligence is the third theme we would like to address this year. We wish to challenge global researchers to provide a smart and responsive environment for improving our lives and stimulating our economy in innovative ways.
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:49

_id	sigradi2009_1019
id	sigradi2009_1019
authors	Christakou, Evangelos Dimitrios; Neander Furtado Silva
year	2009
title	Da Perspectiva Artificialis ao Cyberespaço: Motor Gráfico e a Visualisação Interativa da Luz Natural no Interior do Edificio [From perspectiva artificialis to cyberspace: Game-engine and the interactive visualization of the natural light in the interior of the building]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	In order to support the conceptual design, the architect used throughout the years, mockups - scaled physical models - or perspective drawings that intended to predict architectural ambience before its effective construction. This paper studies the real time interactive visualization, focused on one of most important aspects inside building space: the natural light. Although the majority of physically-based algorithms currently existing was designed for the synthesis of static images which may not take into account how to rebuild the scene - in real time - when the user is doing experiments to change certain properties of design.
keywords	omputer simulation; computer visualization; Natural Light; real-time interactivity
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	506b
id	506b
authors	Christenson, Mike
year	2009
title	Testing the relevance of parameterization to architectural epistemology
source	Architectural Science Review, Volume 52.2: 135-141
summary	Advances in building information modeling (BIM) deeply impact the production of new architecture; its benefits are obvious and its acceptance widespread. But how does BIM impact the study of existing architecture? Can BIM be assumed to operate as a neutral framework, equally applicable to the study of architecture anywhere? Using as a point of departure a recent outline of the conceptual structure of parametric modeling prepared by Sacks, Eastman, and Lee (2004), this paper compares parametric models of two existing works of architecture: Mies van der Rohe’s Crown Hall and Peter Zumthor’s St. Benedict Chapel. The processes of parametrically modeling each building are specifically compared in two ways: first, parameters are established for each model; second, each model is "flexed" as a means of disclosing possible semantic relationships within each work of architecture. Because each building demands a different parameter-establishment strategy, and because the models permit different degrees of flexibility, the comparison illustrates the shortcomings of a "neutral framework" assumption to an architectural epistemology.
keywords	Existing architecture, Parametric modeling, Representation
series	journal paper
type	normal paper
email
more	http://www.earthscanjournals.com/asre/052/asre0520135.htm
last changed	2009/06/18 14:24

_id	sigradi2009_673
id	sigradi2009_673
authors	Costa, Fernando José de Medeiros; Marcelo Bezerra de Melo Tinôco
year	2009
title	O Uso de Maquetes e Modelos Geométricos Tridimensionais no Ensino de Arquitetura e Urbanismo [The use of 3D geometric models for teaching architecture and urban planning]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This research analyzes how schools of architecture in Brazil has responded to technological advances in the field of three-dimensional geometric modeling to support research activity and enhance education
keywords	Scale models; geometric models; rapid prototyping; architectureand planning
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	caadria2009_151
id	caadria2009_151
authors	Fox, Michael A.
year	2009
title	Redesigning The Brick
doi	https://doi.org/10.52842/conf.caadria.2009.381
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 381-390
summary	This research examines the value of “redesigning the brick,” in creating a new vocabulary of basic architectural building blocks with autonomous reconfigurable robotics. The paper highlights several built examples by the author of robotic architectural environments and the work of architecture students whereby individual modules were created within the context of a design studio and applied to scenarios of space making at various scales. Several strategies for decentralized control were explored dictating how individual parts of a system should behave and how local interactions between individual modules can lead to the emergence of global behaviour. The students schematically designed selfreplicating models which would allow for each object to be able to attach, detach, and reconfigure according to predetermined computational logic. The projects successfully demonstrate various strategies for mechanical design, locomotion and control.
keywords	Interactive Architecture: Modular Robotics; Robotics; Kinetics; Biomimetics
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ecaade2009_177
id	ecaade2009_177
authors	Göttig, Roland; Braunes, Jörg
year	2009
title	Building Survey in Combination with Building Information Modelling for the Architectural Planning Process
doi	https://doi.org/10.52842/conf.ecaade.2009.069
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 69-74
summary	The architectural planning process is influenced by social, cultural and technical aspects (Alexander, 1977). When focussing on computer based planning for retrofitting or modification of buildings it becomes clear that many different data formats are used depending on a great variety of planning methods. Moreover, if building information models are utilized they still lack some essential criteria. It is rarely possible to attach individual data from survey systems. This paper will show both a way to add data from building survey systems as an example for special data attachment on IFC files and how to utilize content management systems for IFC files, deviated plans, lists of building components, and other data necessary in a planning process.
wos	WOS:000334282200007
keywords	Planning process, building information modeling, IFC, building survey systems, content management systems
series	eCAADe
email
last changed	2022/06/07 07:50

_id	caadria2009_034
id	caadria2009_034
authors	Huang, Yu-Chun; Kuan-Ying Wu and Yu-Tung Liu
year	2009
title	A Timing Home Pub
doi	https://doi.org/10.52842/conf.caadria.2009.577
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 577-586
summary	This paper describes how humans can communicate naturally with spaces in our daily lives by using instruments of daily life, such as whiskey glasses, cups, and MP3 players. We provided a smart space, which can not only adjust the environmental atmosphere by human activities, but also solidify connections between human feelings/memories, and record what happens inside it. The challenge of this work lies in how to create an alternative communication channel which can solidify family ties by using a natural and unobtrusive interface. The space is also able to automatically adapt to human feelings by changing the atmosphere, such as by changing the background lighting, music, and appropriate feedback.
keywords	Smart space: human-computer interface
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ecaade2012_113
id	ecaade2012_113
authors	Jutraz, Anja ; Zupancic, Tadeja
year	2012
title	Digital system of tools for public participation and education in urban design: Exploring 3D ICC
doi	https://doi.org/10.52842/conf.ecaade.2012.1.383
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 383-392
summary	This article is a starting point for the development of experiential urban co-design interfaces to enhance public participation in local urban projects and to be also used as a communication and collaboration tool in urban design. It is based on the previous research involving 3D city models utilized as understandable design interfaces for the non-technical public (Jutraz, Zupancic, 2011), where we have already explored different views (pedestrian, intermediate and bird’s-eye view), as well as the means by which the information obtained from these different views may be combined by shifting between viewpoints. Previous work was conducted in the “street lab” as well as the Urban Experimental Lab, which was developed specifi cally for the public’s participation in urban planning (Voigt, Kieferle, Wössner, 2009). Presented in this article is the next step that explores the immersive collaboration environment 3D ICC [1], formerly known as Teleplace. The environment was developed for effi cient collaboration and remote communication and shifts the research focus towards questions regarding how to employ both labs as interfaces between the non-technical public and design professionals. As we are facing the lack of digital systems for public participation and education in urban design, different digital tools for communication and collaboration should be combined into a new holistic platform for design. A digital system of tools needs to be developed that supports the urban design decision-making process and focuses on improved final solutions and increased satisfaction amongst all participants. In this article the system of digital tools for public participation, which include communication, collaboration and education, will be also defi ned, with its basic characteristics and its elements.
wos	WOS:000330322400039
keywords	Digital system of tools; collaboration; 3D model; public participation; urban design
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ascaad2009_carl_lostritto
id	ascaad2009_carl_lostritto
authors	Lostritto, Carl R.
year	2009
title	Teaching Systems-Thinking with Algorithmic Process: Introduction to computation and programming with processing programming language
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 37-46
summary	This research investigates how algorithm design and scripting as pedagogy can affect generalized design ability and understanding. Logical, systematic thinking is considered foundational in developing architectural design aptitude and is explicit when designing algorithms. The course work presented mandates the construction of process rather than product. Scripting is implemented not as a means to an end but rather a medium for exploration. More valuable than formal generator or problem-solver, these scripted designs test direct aesthetic implications. Further tested is the role of animation in de-linearizing the design process. By isolating the algorithm as topic, technique, and concept, scripting skills and the produced artifact are extendable and are translatable to other media. Algorithm design is presented as a 2-dimensional but temporal endeavor: students script an animate, interactive vector-based image. This facilitates the transition from algorithm to spatial experience while also readying students for form-based explorations. The 2-d temporal exercise is of a similar order of complexity to a 3-dimensional static condition. Pieces of the animation structure are provided as a canvas, specifically the ability of the viewer to manually control a single parametric variable that affects the visual output through a user-interface element. The following and final project of the course expands upon the technique of scripting image in the design of an experience by collaging video, images and animation.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ijac20097409
id	ijac20097409
authors	Madkour, Yehia; Oliver Neumann; Halil Erhan
year	2009
title	Programmatic Formation: Practical Applications of Parametric Design
source	International Journal of Architectural Computing vol. 7 - no. 4, 587-604
summary	Programmatic Formation explores design as a responsive process. The study we present engages the complexity of the surroundings using parametric and generative design methods. It illustrates that responsiveness of designs can be achieved beyond geometric explorations. The parametric models can combine and respond simultaneously to design and its programmatic factors, such as performance-sensitive design-decisions, and constraints. We demonstrate this through a series of case studies for a housing tower. The studies explore the extent to which non-spatial parameters can be incorporated into spatial parametric dependencies in design. The results apply digital design and modeling, common to the curriculum of architecture schools, to the practical realm of building design and city planning. While practitioners are often slow to include contemporary design and planning methods into their daily work, the research illustrates how the incorporation of skills and knowledge acquired as part of university education can be effectively incorporated into everyday design and planning.
series	journal
last changed	2010/09/06 08:02

_id	cf2011_p110
id	cf2011_p110
authors	Mcmeel, Dermott
year	2011
title	I think Therefore i-Phone: The influence of Pervasive Media on Collaboration and Multi-Disciplinary Group Work
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 69-84.
summary	The study of value and its transfer during the multi-disciplinary process of design is stable fodder for research; an entire issue of Design Studies has been devoted to Values in the Design Process. By scrutinising design meetings Dantec (2009) and Ball (2009) separately examine the mechanisms of value transfer between the agents involved in design (clients, designers, engineers). Dantec suggests this is best understood in terms of requirement, values and narrative; Ball proposes it should be viewed as a combination of "analogical reasoning" and "environmental simulation". If we look at Vitruvius and his primary architectural manual (Pollio 1960) we find values‚Äîin the form of firmitas, utilitas and venustas‚Äîembedded in this early codification of architectural practice. However, as much current research is restricted to design practice what occurs when value frameworks move between domains of cultural activity (such as design to construction and vice-versa) is not privileged with a comparably sizable body of research. This paper is concerned with the ongoing usage of pervasive media and cellular phones within communications and value transfer across the disciplinary threshold of design and construction. Through participation in a building project we analyse the subtleties of interaction between analogue communication such as sketches and digitally sponsored communication such as e-mail and mobile phone usage. Analysing the communications between the designer and builder during construction suggests it is also a creative process and the distinctions between design and construction processes are complex and often blurred. This work provides an observational basis for understanding mobile computing as a dynamic ‚Äòtuning‚Äô device‚Äîas hypothesized by Richard Coyne (2010)‚Äîthat ameliorates the brittleness of communication between different disciplines. A follow up study deploys ‚Äòdigital fieldnotes‚Äô (dfn) a bespoke iPhone application designed to test further suppositions regarding the influence exerted upon group working by mobile computing. Within collaboration individual communiqu_©s have different levels of importance depending on the specific topic of discussion and the contributing participant. This project furthers the earlier study; expanding upon what mobile computing is and enabling us to infer how these emergent devices affect collaboration. Findings from these two investigations suggest that the synchronous and asynchronous clamour of analogue and digital tools that surround design and construction are not exclusively inefficiencies or disruptions to be expunged. Observational evidence suggests they may provide contingency and continue to have value attending to the relationship between static components‚Äîand the avoidance of failure‚Äîwithin a complex system such as design and construction.
keywords	collaboration, design, mobile computing, digital media
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2009_816
id	sigradi2009_816
authors	Oliveira, Marina Rodrigues de; Márcio Minto Fabrício
year	2009
title	Modelos físicos e virtuais como ferramentas do ensino de projeto de arquitetura: relato de uma vivência [Physical and virtual models as tool in teaching architecture design: an experience report]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This paper reports the visit at Architectural Association, School of Architecture in London. That experience has enabled better understanding of technological tools, parametric design, virtual and physical prototyping application in the design process and how these models allow changes in the teaching dynamics method. This is an observation work which aims to identify changes in teaching design methods. This research helps to create an international scenario of modeling aided design process.
keywords	Physical Model; Virtual Model; Design Process; Design Methods
series	SIGRADI
email
last changed	2016/03/10 09:56

For more results click below: