Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 593

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2009_026
id	caadria2009_026
authors	Ostwald, Michael J.; Josephine Vaughan
year	2009
title	Calculating Visual Complexity In Peter Eisenman’s Architecture
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 75-84
doi	https://doi.org/10.52842/conf.caadria.2009.075
summary	This paper describes the results of the first computational investigation of characteristic visual complexity in the architecture of Peter Eisenman. The research uses a variation of the “box-counting” approach to determining a quantitative value of the formal complexity present in five of Eisenman’s early domestic works (Houses I, II, III, IV and VI all of which were completed between 1968 and 1976). The boxcounting approach produces an approximate fractal dimension calculation for the visual complexity of an architectural elevation. This method has previously been used to analyse a range of historic and modern buildings including the works of Frank Lloyd Wright, Eileen Gray, Le Corbusier and Kazuyo Sejima. Peter Eisenman’s early house designs–important precursors to his later Deconstructivist works–are widely regarded as possessing a high degree of formal consistency and a reasonably high level of visual complexity. Through this analysis it is possible to quantify both the visual complexity and the degree of consistency present in this work for the first time.
keywords	Computational analysis; fractal dimension; box-counting; Peter Eisenman
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	caadria2009_109
id	caadria2009_109
authors	Wang, Chung-yang
year	2009
title	Statics and Dynamics in The Process of CAD/CAM Fabrication
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 245-254
doi	https://doi.org/10.52842/conf.caadria.2009.245
summary	Through the progress of digital media, dynamic concepts contribute to vivid forms. Nevertheless, these forms still present static space, which cannot reflect the designer’s dynamic concept, a shape that changes over time. This is a setback for design and fabrication. Hence many researchers turn to designing dynamic architecture. However, the current development restricted by technical threshold is prone to solve the variation of functions instead of aesthetic-oriented changeable form. It is obvious that the difference between “statics” and “dynamics” becomes a watershed of aesthetics and functions. This research attempts to eliminate the above-mentioned barrier and to suggest a new CAD/CAM fabrication procedure based on aesthetics and reveal key tectonic factors that affect dynamic architecture.
keywords	CAD/CAM: Statics/Dynamics; Tectonics; Fabrications
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	ecaade2009_082
id	ecaade2009_082
authors	Wang, Chung-Yang
year	2009
title	Effect on Architectural Representation through Dynamic and Static Design Methods
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 497-504
doi	https://doi.org/10.52842/conf.ecaade.2009.497
wos	WOS:000334282200060
summary	For accelerating the birth of architectures, people apply logical inductions and definitions to design processes ambiguous in the past then explore the possibilities of design methods. Evolving with times and varied perspectives, there are gradually increasing ways which could generate the difference of the natures in architectures – dynamic or static. Architecture has its own mode of dynamic or static representation in every era. Many studies have pointed out this variation derives from the advances of design media, but there still apparently lacks studies focus on the relationship between design processes and architectural representation. Thus, this research aims to juxtapose design methods with dynamic and static representation in architecture then summarize the possible correlation between these factors.
keywords	Statics/Dynamics, Design method, design media, architectural representation
series	eCAADe
email
last changed	2022/06/07 07:58

_id	caadria2009_031
id	caadria2009_031
authors	Abdelhameed, Wael
year	2009
title	Cognition Model in Conceptual Designing
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 771-780
doi	https://doi.org/10.52842/conf.caadria.2009.771
summary	Both design researchers and cognitive scientists have developed various process models to study human creative behaviour in design. The models developed are often based on observations of design processes and analysis of design protocols. This research paper reports the-stateof- the-art in the area of cognition models that present design activities in conceptual designing. The research paper investigates the approaches of these cognition models. A new approach of a cognition activity model in conceptual designing is proposed. The new approach used in the introduced model takes into the account factors and activities that are related to the external environment of design (design medium). The external environment has an important role in the cognition activities and the evaluation process in a way that can hardly be ignored or neglected. The presented model of cognition activities in conceptual designing highlights two main factors employed in all the iteration loops of the model, namely: media use and representation. Case studies of architecture students’ designs have been analyzed. The analysis of these case studies helped in forming the proposed model. Various results have been concluded and reported.
keywords	Cognition model; conceptual designing; design process; design theory
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ascaad2009_mai_abdelsalam
id	ascaad2009_mai_abdelsalam
authors	Abdelsalam, Mai
year	2009
title	The Use of the Smart Geometry through Various Design Processes: Using the programming platform (parametric features) and generative components
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 297-304
summary	The emergence of parametric generative design tools and prototyping manufacturing technology led to radical changes in architectural morphologies. This change increased the opportunity to develop innovative smart geometries. Integrating these algorithms in the parametric softwares led to variations in building design concepts increasing alternatives and decreasing the repetitive work previously needed in conventional CAD software. The chosen software in this research is Generative Components (GC). It is a software design tool for an associative and parametric design platform. It is tested for using Global Variables with associative functions during the concept creation and form GC comprises features. The results presented in this research may be considered an introduction to the smart geometry revolution. It deals with the generative design which applied in the design process from conceptual design phase, defining the problem, exploring design solutions, then how to develop the design phases. Office building is a building type which encourages new forms that needs computational processes to deal with repetitive functions and modular spaces and enclosed in a flexible creative structural skin. Generative design helps the office buildings to be arranged, analysed, and optimized using parameters in early stages in design process. By the end of the research, the use of the smart geometry in a high rise office building is defined and explained. The research is divided into three parts, first a summary of the basic theories of office buildings design and the sustainable requirements that affect it, and should be integrated. Secondly, the previous experiences in generating office buildings by Norman foster and Sergio Araya. At last, a case study is proposed to test and evaluate the use of the parametric generative methodology in designing an office building with specific emphasis on the function, environmental aspects and form generation using Generative Components (GC) Software.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	acadia18_216
id	acadia18_216
authors	Ahrens, Chandler; Chamberlain, Roger; Mitchell, Scott; Barnstorff, Adam
year	2018
title	Catoptric Surface
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 216-225
doi	https://doi.org/10.52842/conf.acadia.2018.216
summary	The Catoptric Surface research project explores methods of reflecting daylight through a building envelope to form an image-based pattern of light on the interior environment. This research investigates the generation of atmospheric effects from daylighting projected onto architectural surfaces within a built environment in an attempt to amplify or reduce spatial perception. The mapping of variable organizations of light onto existing or new surfaces creates a condition where the perception of space does not rely on form alone. This condition creates a visual effect of a formless atmosphere and affects the way people use the space. Often the desired quantity and quality of daylight varies due to factors such as physiological differences due to age or the types of tasks people perform (Lechner 2009). Yet the dominant mode of thought toward the use of daylighting tends to promote a homogeneous environment, in that the resulting lighting level is the same throughout a space. This research project questions the desire for uniform lighting levels in favor of variegated and heterogeneous conditions. The main objective of this research is the production of a unique facade system that is capable of dynamically redirecting daylight to key locations deep within a building. Mirrors in a vertical array are individually adjusted via stepper motors in order to reflect more or less intense daylight into the interior space according to sun position and an image-based map. The image-based approach provides a way to specifically target lighting conditions, atmospheric effects, and the perception of space.
keywords	full paper, non-production robotics, representation + perception, performance + simulation, building technologies
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	ascaad2009_hafsa_al_omari
id	ascaad2009_hafsa_al_omari
authors	Al-Omari, Hafsa and Luma Al Dabbagh
year	2009
title	Form in Islamic Architecture: A new vision by using 3D Studio Max program
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 433-450
summary	Architecture is a record of human civilization, values, principles and concepts. Form (elements and relations) is one of the visual features of identity and self on one hand and expressive features of place and time (scientific and technical development ) on the other hand. Creating new forms from historical forms is considered one of the greatest challenges that face the architect. Research problem centered on the importance of form in Islamic architecture, and the possibility of investment a new scientific method ( 3D Studio Max program) in creating contemporary architecture using historical and traditional Islamic forms. Research divides to three sections. The first is a theoretical framework that determines the importance and the generation and the potentiality of form in Islamic architecture. The second studies the traditional methods that has been used to create a contemporary Arab-Islamic architecture using historical references, then introduce 3D Studio Max program as alternative new scientific method to traditional methods contribute to create a new vision of contemporary Arab Islamic architecture. The conclusions identify the importance of form in the Islamic civilization and showed that the generation of form affected by its potentiality. Research opens new methods that have not been studied previously in creating contemporary Islamic architecture by using the modifier stack in 3D Studio Max program.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ascaad2009_hussein_albotany
id	ascaad2009_hussein_albotany
authors	Albotany, Hussein S.
year	2009
title	Development of Digital City Models Using 3d GIS
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 409-418
summary	“Digital city” is a copy of an actual city in the virtual space. It is expected to play an important role in urban planning, disaster simulation etc. Recent advanced remote sensing technologies, which are capable to quickly provide detailed information of city areas, ease the construction of 3D city models. Urbanization has evinced interest from a wide section of the society including experts, amateurs and novices. With the development and infrastructure initiatives mostly around the urban centers, the impacts of urbanization and sprawl would be on the environment and the natural resources. The research introduces an application of 3D GIS on Manama City.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ascaad2009_michael_ambrose
id	ascaad2009_michael_ambrose
authors	Ambrose, Michael A.
year	2009
title	Spatial and Temporal Sequence: Film, animation and design theory - toward a constructed morphology
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 165-176
summary	This paper presents an investigation of film, space, form and motion to expose issues of spatial perception. The objective is to use a brief moment of constructed moving imagery (a film scene) as the vehicle to develop a spatial/temporal sequence. The design research focuses on an examination of the procedure or process constructed by the director/cinematographer. The changing position of the camera continually changes the relationship of the frame to the viewed context. The project asks the student to interpret the spatial and temporal transformation, through the continual oscillation between foreground and background, in an effort to unravel the pretext of the singular point of view to reveal the intention of the filmmaker. The project discussed here focuses on a relationship between the projection of space in architectural representation and the production of space through complex geometries relative to temporal discontinuities and the way in which they agitate and alter one another. Drawing topological relationships between of the paths, or trajectories of movement, within a proposed scene of a film is the vehicle for investigation in this project. An event or configuration complete in itself, but forming part of the larger collection, is modelled and transformed to suggest various structural and temporal definitions with respect to spatial portrayal through the composition of time and the cinematic frame. In particular, spatial animation of a sequence of framed condition was to be explored in the development of a spatial episode.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	sigradi2009_744
id	sigradi2009_744
authors	Assumpção, Paula Sobrino de Souza;
year	2009
title	A influência do usuário sobre a apresentação visual da informação na web: o caso do layout adaptativo e da personalização de layout [User's influence on the visual presentation of information on the web: the case of adaptive layout and layout’s customization]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	Ahead of the digital environments expansion which follows the principles of the web 2.0, one can notice a growing opening for user's participation. The proposal of this research is to reflect on how this scenario of participation is strengthening a social structure capable of actively acting not only in the production of digital content, but also in the form of this content presentation. From a survey of cases and a theoretical review, this paper aims to analyze two different types of user’s influence on the visual dimension of web environments. One first - adaptive layout - based on the indirect user’s action and a second - layout’s customization - based on the direct user’s action.
keywords	Web design; web 2.0; architecture of participation; visual presentation
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2009_137
id	caadria2009_137
authors	Baerlecken, Daniel; Judith Reitz
year	2009
title	Combinatorial Productivity
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 761-770
doi	https://doi.org/10.52842/conf.caadria.2009.761
summary	The paper investigates knotting techniques as a method for generating wall systems. The essential matter of the paper is to demonstrate the potential of knotted, algorithmic architecture through different research studies, which share the knotting of linear elements as a common methodology for design development. Combinatorial Productivity implies that by combining linear elements hidden properties of a system emerge and thereby the system becomes productive.
keywords	Generative Design; Design methodology; Parametric Form Generation; Knot Theory; Scripting
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2010_215
id	ecaade2010_215
authors	Barczik, Guenter
year	2010
title	Uneasy Coincidence? Massive Urbanization and New Exotic Geometries with Algebraic Geometry as an Extreme Example
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.217-226
doi	https://doi.org/10.52842/conf.ecaade.2010.217
wos	WOS:000340629400023
summary	We investigate the recent coincidence of rapid global urbanization and unprecedented formal freedom in architectural design and ask whether this coincidence is an uneasy one. To study an extreme case of the new exotic geometries made possible through CAAD, we employ algebraic surfaces to experimentally design architecture in an university-based research and experimental design project. Such surfaces exhibit unprecedented complexity and new geometric and topological features yet are highly sound and harmonious. We continue and extend our research presented at the eCAADe 2009 conference in Istanbul.
keywords	Algebraic geometry; Shape; Sculpture; design; Tool; Experiment; Methodology; Software
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2009_157
id	ecaade2009_157
authors	Barczik, Günter; Labs, Oliver; Lordick, Daniel
year	2009
title	Algebraic Geometry in Architectural Design
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 455-464
doi	https://doi.org/10.52842/conf.ecaade.2009.455
wos	WOS:000334282200055
summary	We describe the exploration of the manifold novel shapes found in algebraic geometry and their application in architectural design. These surfaces represent the zero-sets of certain polynomials of varying degrees. They are therefore very structured, coherent and harmonious yet at the same time geometrically and topologically highly complex. Their application in design is mostly unprecedended as they have only recently begun to become accessible through novel software tools. We present and discuss experimental student design and research projects where shapes found in algebraic geometry were developed into pavilion designs. We describe historic precedents for the inspiration of art and architecture through mathematics and show how algebraic surfaces can be used to expand architects’ sculptural vocabulary, make the utmost of three-dimensional sculptural qualities, employ shapes that have a strong internal structure, transcend the imaginable and explore polynomials as a new kind of shape-making tool.
keywords	Geometry, algebraic geometry, shape, sculpture, design, tool, experiment, methodology, software
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2010_043
id	caadria2010_043
authors	Barker, Tom and M. Hank Haeusler
year	2010
title	Urban digital media: facilitating the intersection between science, the arts and culture in the arena of technology and building
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 457-466
doi	https://doi.org/10.52842/conf.caadria.2010.457
summary	The research presented in this paper investigates ways of providing better design applications for technologies in the field of Urban Digital Media (UDM). The work takes an emergent approach, evolving a design strategy through the early engagement of stakeholders. The paper discusses research in a design-led creative intersection between media technology, culture and the arts in the built environment. The case study discusses opportunities for the enhancement of a university campus experience, learning culture and community, through the provision of an integrated digital presence within campus architecture and urban spaces. It considers types of information architecture (Manovich, 2001) and designs for use in urban settings to create communication-rich, advanced and interactive designed spaces (Haeusler, 2009). The presented research investigates how to create a strategy for display technologies and networked communications to transform and augment the constructed reality of the built environment, allowing new formats of media activity.
keywords	Urban design; outdoor digital media; information architecture; multidisciplinary design; augmented reality; media facades
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia09_82
id	acadia09_82
authors	Bitonti, Francis
year	2009
title	Computational Tectonics
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 82-89
doi	https://doi.org/10.52842/conf.acadia.2009.082
summary	The goal of this research is to define a methodology for the construction of complex non-repeating surfaces and structures that rely on the formulation of a singular tectonic mechanism. Computational systems like cellular automata seem to suggest that it might be possible for modular material systems to self-assemble into complex organizations. A single series of modular parts could be capable of producing not only complex behavior, but also, depending on initial conditions, simple periodic behavior. The research outlined in this paper uses simple geometric transformations to produce tectonic computers that can be applied to a variety of building systems. This paper outlines a methodology for encoding and decoding material assemblages as discrete computational systems. Exploiting the combinatorial nature of tectonic systems makes it possible to produce a population of “material algorithms” capable of exhibiting a wide range of behaviors. Encoding assemblages as discrete systems affords the designer the ability to enumerate and search all possible permutations of a tectonic system. In this paper, we will discuss the calculations and computational processes used to encode material assemblages as populations of discrete algorithms.
keywords	Fabrication, modular system, structure, enumeration systems, material algorithms
series	ACADIA
type	Normal paper
email
last changed	2022/06/07 07:52

_id	caadria2009_103
id	caadria2009_103
authors	Boeykens, Stefan; Herman Neuckermans
year	2009
title	Content Management Systems Versus Learning Environments
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 285-294
doi	https://doi.org/10.52842/conf.caadria.2009.285
summary	Schools and teachers increasingly apply Online Learning Environments for teaching and course management. In many cases, an existing platform is used to support the curriculum. At the K.U. Leuven in Belgium a campus-wide platform is provided, using a commercial Content Management System. At the same time, the Design and Building Methodology research group at the Department of Architecture, Urbanism and Planning developed a custom portal to organize Computer Aided Architectural Design courses and seminars. Integration of this portal into the university system was rather disappointing, since much of the flexibility and customizability was lost, without any chance of filling in the gaps. This article discusses the possibilities and limitations of existing web-based systems to support Computer Aided Architectural Design teaching and reports on our own experiences from the last decade. A comparison of selected systems is juxtaposed with the requirements derived from these experiences.
keywords	Education; CMS; LMS; CAAD
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	4f1b
id	4f1b
authors	Booth, Peter
year	2009
title	Digital Materiality: emergent computational fabrication
source	Performative Ecologies in the Built Environment: Sustainability Research Accross Disciplines: 43rd Annual Conference of the Australian and New Zealand Architectural Science Association
summary	Fundamentally architecture is a material-based practice that implies that making and the close engagement of materiality is intrinsic to design process. With the rapid uptake of new computational tools and fabrication techniques by the architectural profession there is potential for the connection between architecture and materiality to be diminished. Innovative digital technologies are redefining the relationship between design and construction encoding in the process new ways of thinking about architecture. A new archetype of sustainable architectural process is emerging, often cited as Digital Materialism. Advanced computational processes are moving digital toolsets away from a representational mode towards being integral to the design process. These methods are allowing complex design variables (material, fabrication, environment, etc.) to be interplayed within the design process, allowing an active relationship between performative criteria and design sustainability to be embedded within design methodology.
keywords	Digital, Process, Material, Fabrication
series	other
type	normal paper
email
last changed	2010/03/06 02:53

_id	ecaade2009_003
id	ecaade2009_003
authors	Brell-Cokcan, Sigrid; Reis, Martin; Schmiedhofer, Heinz; Braumann, Johannes
year	2009
title	Digital Design to Digital Production: Flank Milling with a 7-Axis CNC-Milling Robot and Parametric Design
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 323-330
doi	https://doi.org/10.52842/conf.ecaade.2009.323
wos	WOS:000334282200039
summary	Just recently Flank Milling has opened up new possibilities in detailing large-scale architectural building envelopes. Whereas examples such as the Hungerburgbahn by Zaha Hadid show the application of Flank Milling at the end of the architectural manufacturing process, our research, in contrast, focuses on the implementation of constraints immanent to manufacturing techniques as early architectural design parameters. This process is explored by the help of generative modeling tools, to allow an intuitive design of freeform parametric curves and surfaces while at the same time obeying crucial geometric conditions. In this paper, we will focus on the “digital design to digital production” process on a 7-axis industrial CNC -robot.
keywords	CNC milling technologies, robot-milling, parametric design, freeform surface, digital architecture
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2009_017
id	caadria2009_017
authors	Bruton, Dean
year	2009
title	On Distributed Network Rendering Systems
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 65-74
doi	https://doi.org/10.52842/conf.caadria.2009.065
summary	This paper reports an investigation of the establishment and performance of a distributed computer rendering system for advanced computer graphics production within a centralized university information technology environment. It explores the proposal that the use of distributed computer rendering systems in industry and universities offers synergies for university-industry collaborative agreements. Claims that cluster computing and rendering systems are of benefit for computer graphics productions are to be tested within a standard higher education environment. A small scale distributed computer rendering system was set up to investigate the development of the optimum use of intranet and internet systems for computer generated feature film production and architectural visualisation. The work entailed using monitoring, comparative performance analysis and interviews with relevant stakeholders. The research provides important information for practitioners and the general public and heralds the initiation of a Centre for Visualization and Animation research within the School of Architecture, Landscape Architecture and Urban Design, University of Adelaide.
keywords	Render farm, processing, computer graphics, animation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ijac202119302
id	ijac202119302
authors	BuHamdan, Samer; Alwisy, Aladdin; Bouferguene, Ahmed
year	2021
title	Generative systems in the architecture, engineering and construction industry: A systematic review and analysis
source	International Journal of Architectural Computing 2021, Vol. 19 - no. 3, 226–249
summary	Researchers have been extensively exploring the employment of generative systems to support design practices in the architecture, engineering and construction industry since the 1970s. More than half a century passed since the first architecture, engineering and construction industry’s generative systems were developed; researchers have achieved remarkable leaps backed by advances in computing power and algorithms’ capacity. In this article, we present a systematic analysis of the literature published between 2009 and 2019 on the utilization of generative systems in the design practices of the architecture, engineering and construction industry. The present research studies present trends, collaborations and applications of generative systems in the architecture, engineering and construction industry in order to identify existing shortcomings and potential advancements that balance the need for theory development and practical application. It provides insightful observations that are translated into meaningful recommendations for future research necessary to progress the incorporation of generative systems into the design practices of the architecture, engineering and construction industry.
keywords	Generative systems, architecture, engineering and construction industry, performative design, generative design, systematic literature review, future directions
series	journal
email
last changed	2024/04/17 14:29

For more results click below: