Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 582

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2009_067
id	caadria2009_067
authors	Nilkaew, Piyaboon
year	2009
title	The Study of Building Management by using 3D Digital Modeling and Database: ABFM
doi	https://doi.org/10.52842/conf.caadria.2009.235
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 235-243
summary	The principal objective of building management is to control facilities planning and facilities operations and maintenance, that effective criteria in strategic planning about preventive maintenance and predictive maintenance. The key of success in managing the building and facilities is all about collecting and interpreting data on diverse facets of property use. Computer databases are the ideal vehicles in which to log, store and manipulate data; almost unlimited information can be measured and entered en masse. The strength of such information storage is its capacity for expansion and the diversity of subject; it becomes large and requires greater and greater operator familiarity with its structure in order to interrogate successfully. The ultimate solution is to computer–base the entire operation, by using the three-dimensional building modelling to control the operation. This solution will simulate building in virtual environment and the building system data (Architectural part and Engineering part) will collect in digital data type. The digital data will classification and made three-dimensional database relations. This research focus in three sections of the operation as three-dimensional database relationship, topological simulation and smart system, that applied to generate the prototype building management application “Architecture Building Facilities Management: ABFM”.
keywords	Building management; facilities management; 3D database; smart system
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	caadria2009_151
id	caadria2009_151
authors	Fox, Michael A.
year	2009
title	Redesigning The Brick
doi	https://doi.org/10.52842/conf.caadria.2009.381
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 381-390
summary	This research examines the value of “redesigning the brick,” in creating a new vocabulary of basic architectural building blocks with autonomous reconfigurable robotics. The paper highlights several built examples by the author of robotic architectural environments and the work of architecture students whereby individual modules were created within the context of a design studio and applied to scenarios of space making at various scales. Several strategies for decentralized control were explored dictating how individual parts of a system should behave and how local interactions between individual modules can lead to the emergence of global behaviour. The students schematically designed selfreplicating models which would allow for each object to be able to attach, detach, and reconfigure according to predetermined computational logic. The projects successfully demonstrate various strategies for mechanical design, locomotion and control.
keywords	Interactive Architecture: Modular Robotics; Robotics; Kinetics; Biomimetics
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ascaad2014_023
id	ascaad2014_023
authors	Al-Maiyah, Sura and Hisham Elkadi
year	2014
title	Assessing the Use of Advanced Daylight Simulation Modelling Tools in Enhancing the Student Learning Experience
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 303-313
summary	In architecture schools, where the ‘studio culture’ lies at the heart of students’ learning, taught courses, particularly technology ones, are often seen as secondary or supplementary units. Successful delivery of such courses, where students can act effectively, be motivated and engaged, is a rather demanding task requiring careful planning and the use of various teaching styles. A recent challenge that faces architecture education today, and subsequently influences the way technology courses are being designed, is the growing trend in practice towards environmentally responsive design and the need for graduates with new skills in sustainable construction and urban ecology (HEFCE’s consultation document, 2005). This article presents the role of innovative simulation modelling tools in the enhancement of the student learning experience and professional development. Reference is made to a teaching practice that has recently been applied at Portsmouth School of Architecture in the United Kingdom and piloted at Deakin University in Australia. The work focuses on the structure and delivery of one of the two main technology units in the second year architecture programme that underwent two main phases of revision during the academic years 2009/10 and 2010/11. The article examines the inclusion of advanced daylight simulation modelling tools in the unit programme, and measures the effectiveness of enhancing its delivery as a key component of the curriculum on the student learning experience. A main objective of the work was to explain whether or not the introduction of a simulation modelling component, and the later improvement of its integration with the course programme and assessment, has contributed to a better learning experience and level of engagement. Student feedback and the grade distribution pattern over the last three academic years were collected and analyzed. The analysis of student feedback on the revised modelling component showed a positive influence on the learning experience and level of satisfaction and engagement. An improvement in student performance was also recorded over the last two academic years and following the implementation of new assessment design.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	cf2009_727
id	cf2009_727
authors	de Vries, Bauke; Jessurun, Joran and Sadowski-Rasters, Gaby
year	2009
title	Dynamic plan modelling and visualization: Converting an urban development plan into a transition scenario
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 727- 739
summary	Application of 3D models in urban planning practice is still limited to visualization of existing or newly designed situations. Municipalities are looking for possibilities to communicate the transition process of the urban development area with the citizens. A prototype system was developed to investigate what the technical requirements are of such a tool and what the organizational consequences will be. As an example, screenshots are shown of a district in Eindhoven at different moments in time. Finally, recommendations are given on what is needed to turn the prototype into a professional tool.
keywords	GIS, 3D modeling, transitions, urban planning
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	ecaade2009_177
id	ecaade2009_177
authors	Göttig, Roland; Braunes, Jörg
year	2009
title	Building Survey in Combination with Building Information Modelling for the Architectural Planning Process
doi	https://doi.org/10.52842/conf.ecaade.2009.069
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 69-74
summary	The architectural planning process is influenced by social, cultural and technical aspects (Alexander, 1977). When focussing on computer based planning for retrofitting or modification of buildings it becomes clear that many different data formats are used depending on a great variety of planning methods. Moreover, if building information models are utilized they still lack some essential criteria. It is rarely possible to attach individual data from survey systems. This paper will show both a way to add data from building survey systems as an example for special data attachment on IFC files and how to utilize content management systems for IFC files, deviated plans, lists of building components, and other data necessary in a planning process.
wos	WOS:000334282200007
keywords	Planning process, building information modeling, IFC, building survey systems, content management systems
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ijac20097406
id	ijac20097406
authors	Hanafin, Stuart; Greg Pitts; Sambit Datta
year	2009
title	Non-Deterministic Exploration through Parametric Design
source	International Journal of Architectural Computing vol. 7 - no. 4, 605-622
summary	This paper explores non-deterministic parametric modelling as a design tool. Specifically, it addresses the application of parametric variables to the generation of a conceptual bridge design and the use of repeatable discrete components to the conceptual form. In order to control the generation of the bridge form, a set of design variables based on the concept of a law curve have been developed. These design variables are applied and tested through interactive modelling and variation, driven by manipulating the law curve. Combining this process with the application and control of a repeatable element, known as a Representative Volumetric Element (RVE), allows for the development and exploration of a design solution that could not be achieved through the use of conventional computer modelling. The competition brief for the Australian Institute of Architects (AIA) ‘Dialectical Bridge’ has been used as a case study to demonstrate the use of non-deterministic parametric modelling as a design tool. The results of the experimentation with parametric variables, the law curve and representative volumetric elements (RVE) are presented in the paper.
series	journal
last changed	2010/09/06 08:02

_id	caadria2009_091
id	caadria2009_091
authors	Pitts, Greg; Sambit Data
year	2009
title	Parametric Modelling of Architectural Surfaces
doi	https://doi.org/10.52842/conf.caadria.2009.635
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 635-644
summary	Parametric modelling is gaining in popularity as both a fabrication and design tool, but its application in the architectural design industry has not been widely explored. Parametric modelling has the ability to generate complex forms with intuitively reactive components, allowing designers to express and fabricate structures previously too laborious and geometrically complex to realise. This allows designers to address a project at both the macro and micro levels of resolution in the governing control surface and the individual repetitive component. This two level modelling control, of component and overall surface, can allow designers to explore new types of form generation subject to parametric constraints. Shading screens have been selected as the focus for this paper and are used as a medium to explore form generation within a given set of functional parameters. Screens can have many applications in a building but for the purpose of the following case studies, lighting quality and passive sun control are the main functional requirement. A set of screen components have been designed within certain shading parameters to create a generic component that can automatically adapt to any given climatic conditions. These will then be applied to surfaces of varying degrees of geometric complexity to be analysed in their ability to correctly tessellate and create a unified screening array true to the lighting requirements placed on the generic component.
keywords	Parametric Modelling: Screening; Design; Fabrication
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	sigradi2009_980
id	sigradi2009_980
authors	Romero R., William A.; Juan Camilo Ibarra; José Tiberio Hernández; Sergio Ordoñez
year	2009
title	Multi-modal simulation for urban mobility analysis: An approach based on a model of behaviour and infrastructure-related anomalies
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This paper presents a distributed simulation system for urban scenarios where infrastructure anomalies are common, such as those present in Latin-American cities. A microscopic-based model has been developed in order to represent the behavioural characteristics of the different mobility actors in a discrete lattice. The visualization component allows an interactive and immersive experience of the simulation results, providing a detailed point of view (focus) in the global environment (context). It is possible to empower the users’ interaction through devices for control and navigation of the data visualization.
keywords	Simulation Support Systems; Modelling and Simulation (M&S); Traffic Simulation; Immersive Visualization
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	ascaad2009_andrea_cammarata
id	ascaad2009_andrea_cammarata
authors	Cammarata, Andrea
year	2009
title	Rebuilding Architecture: An analysis and critical investigation practice
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 121-134
summary	The Cooperative Design Environment Laboratory (CoDE Lab) is carrying out a research with students, trainees and seniors who have previously participated to CAAD-assisted design courses. These courses were developed with the aim of making participants independent from the pre-analytical phase project to the renderings of the final artifact. The programs that have been used so far are Autodesk Revit, Graphisoft Archicad and Nemetschek Allplan.The teaching workgroup has always believed that analyzing, deconstructing and reconstructing the architecture teaches much in terms of understanding. If the process is done correctly, it entirely re-traces the creative dynamics developed by the original designer. Subsequently, the educational practice is to choose a notable architectural work, designed and/or created by a Master of architecture, and to reproduce it in all details: aesthetical-formal, morphological, technological, structural, modular, etc. The final result is an archive of well-developed reconstructed models of great specific interest. The students on the other hand thoroughly learn how to control the tools and all BIM planning procedures.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	acadia09_264
id	acadia09_264
authors	Zhang, Yu; Feng, Han; Wang, Jianguo
year	2009
title	An Interactive Decision Support System for Deriving Plot Ratios Based on the Similarity Relations Between Land Attributes
doi	https://doi.org/10.52842/conf.acadia.2009.264
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 264-266
summary	This paper presents a simple tool for deciding land attribute plot ratios by defining elementary entities and their relationships from the viewpoint of a complex adaptive system. Each entity in this case, a block in the city, is described according to its condition and potential for development, such as land function, accessibility, landscape control, and so on. This not only provides a rich yet subtle identification of each entity, but also creates the basis to establish dynamic interconnections between them. The similarity coefficient, calculated by the comparison between the different blocks’ factors fits well with the explanation of the spontaneous development of the city. The weight of every factor and the threshold of the similarity coefficient are both set as variables, with the optimized value recommended as a default, which ensures a multitudinal application of this software with a focus on different aspects of urban planning. The resultant self-regulatory system with flexible input is not only a credible tool for deriving plot ratios, but also an effective platform to activate urban design creations. The system, as a socio-technical tool, enhances the essential process of urban self-organization and hetero-organization.
keywords	Decision Support, software, self-organization systems, parametric systems
series	ACADIA
type	Short paper
email
last changed	2022/06/07 07:57

_id	acadia18_216
id	acadia18_216
authors	Ahrens, Chandler; Chamberlain, Roger; Mitchell, Scott; Barnstorff, Adam
year	2018
title	Catoptric Surface
doi	https://doi.org/10.52842/conf.acadia.2018.216
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 216-225
summary	The Catoptric Surface research project explores methods of reflecting daylight through a building envelope to form an image-based pattern of light on the interior environment. This research investigates the generation of atmospheric effects from daylighting projected onto architectural surfaces within a built environment in an attempt to amplify or reduce spatial perception. The mapping of variable organizations of light onto existing or new surfaces creates a condition where the perception of space does not rely on form alone. This condition creates a visual effect of a formless atmosphere and affects the way people use the space. Often the desired quantity and quality of daylight varies due to factors such as physiological differences due to age or the types of tasks people perform (Lechner 2009). Yet the dominant mode of thought toward the use of daylighting tends to promote a homogeneous environment, in that the resulting lighting level is the same throughout a space. This research project questions the desire for uniform lighting levels in favor of variegated and heterogeneous conditions. The main objective of this research is the production of a unique facade system that is capable of dynamically redirecting daylight to key locations deep within a building. Mirrors in a vertical array are individually adjusted via stepper motors in order to reflect more or less intense daylight into the interior space according to sun position and an image-based map. The image-based approach provides a way to specifically target lighting conditions, atmospheric effects, and the perception of space.
keywords	full paper, non-production robotics, representation + perception, performance + simulation, building technologies
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	ijac20097104
id	ijac20097104
authors	Forte, Maurizio; Pietroni, Eva
year	2009
title	3D Collaborative Environments in Archaeology: Experiencing the Reconstruction of the Past
source	International Journal of Architectural Computing vol. 7 - no. 1, 57-76
summary	This paper presents the outcome of the research project: "Integrated Technologies of Robotics and Virtual Environments in Archaeology", financed by the Italian Ministry of the University and Scientific Research, FIRB (Funds for the Investments of Basic Research). The aim of the project is to experiment and realize a multi-user domain on the web aimed to a multidisciplinary scientific community: archaeologists, historians, experts in human and social sciences, communication experts. The capacity to load, share and interact with data in the same spatial virtual environment can increase the level of learning and scientific communication. The project is the result of the collaboration between CNR-ITABC of Rome, the University of California, Merced, the Department of Archaeology of the University of Pisa and Scuola S. Anna of Pisa. It focuses on three archaeological sites: the Teban tomb 14 in the necropolis of Gurna, Fayum Medinet Madi, both in Egypt, and Khor Rori, in Oman. The collaborative environment is constructed through a virtual reality system. This allows to create a virtual space where it is possible to share 3D information on the project and to host additional behaviors of the scientific community.
series	journal
last changed	2009/06/23 08:07

_id	acadia09_32
id	acadia09_32
authors	Singer, Peter W.
year	2009
title	What Inspires Them: Science Fiction’s Impact on Science Reality
doi	https://doi.org/10.52842/conf.acadia.2009.032
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 32-42
summary	The following is an excerpt from my book Wired for War: The Robotics Revolution and Conflict in the 21st Century (Penguin, 2009). This chapter explores how the world of science fiction actually helps to shape the very real human-built environment around us. Besides being one of my favorite parts of the book to research and write, I thought it a particularly fun fit for the ACADIA audience, as it takes us back to the question of what originally inspires us.
keywords	Robots, cybernetics, sociology, conflict
series	ACADIA
type	Keynote paper
email
last changed	2022/06/07 07:56

_id	sigradi2009_854
id	sigradi2009_854
authors	Antoniazzi, Asdrubal; Airton Cattani; Jaqueline Viel Caberlon Pedoni
year	2009
title	Procedimentos metodológicos para simulação computacional de ambientes históricos [Methodological procedures for computer simulation of historical surroundings]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This study aims to present a classification of methodological procedures for using computer programmes to simulate architectural historical heritage. Produced for a Master’s Degree dissertation in Architecture, the methodology was developed based on several analyses of applications, possibilities and restrictions, with the assistance of photogrammetric reconstruction and several computer-graphics programmes. The files generated enable production of animations recording the changes experienced by buildings at various historical periods. These procedures were applied to the simulation of several buildings around the Praça Dante Alighieri in the centre of Caxias do Sul, Rio Grande do Sul, demonstrating their appropriateness and effectiveness and also showing the potential of computer-simulation resources for the historical environment, both educationally and in appreciation of architectural heritage.
keywords	Three-dimensional geometric modelling; Computer simulation; Digital reconstruction; Historical environment
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	96d8
id	96d8
authors	Booth, Peter; Loo, Stephen
year	2009
title	Beyond Equilibrium: Sustainable Digital Design
source	Sustainable theory/ theorizing sustainability Proceedings from the 5th International Conference of the Association of Architecture Victoria University, New Zealand, 4-5 September 2009
summary	Implicit in current understandings of sustainability is the presence of a closed system with the capacity of equilibration. Sustainable practices, including design practices, are therefore assumed to possess a redemptive role: design is deployed (as environmentally sustainable design, etc.) to change habits, develop new technologies and recover marginalized practices in the hope of righting the balance between the environment and human endeavours. Recent developments in experimental digital design have demonstrated non‐linear and highly complex relations between topological transformations, material change, and the temporal dimension of forces. More importantly, this method of design is bottom‐up, because it does not rely on design solutions presaged by conventions, or restricted by representation, but is emergent within the performance of computational design itself. We argue that digital design processes need to move beyond the flux of determinates and solutions in equilibrium, towards a radically continuous but consistent production, which is in effect, an expression of sustainable pedagogy. The role of emergent digital techniques has significant impact on the methods in which computation is utilized within both practice and academic environments. This paper outlines a digital design studio on sustainability at the University of Tasmania, Australia that uses parametric modelling, digital performance testing, and topological morphology, concomitant with actual material fabrication, as a potent mode of collaborative design studio practice towards a sustainable design pedagogy.
keywords	digital, computation, process, morphogenesis.
series	other
type	normal paper
email
last changed	2009/09/08 23:21

_id	ijac20097101
id	ijac20097101
authors	Boulaassal, H.; Landes, T.; Grussenmeyer, P.
year	2009
title	Automatic Extraction of Planar Clusters and their Contours on Building Facades Recorded by Terrestrial Laser Scanner
source	International Journal of Architectural Computing vol. 7 - no. 1, 1-20
summary	Since 3D city models need to be realistic not only from a bird's point of view, but also from a pedestrian's point of view, the interest in the generation of 3D façade models is increasing. This paper presents two successive algorithms for automatically segmenting building façades scanned by Terrestrial Laser Scanner (TLS) into planar clusters and extracting their contours. Since majority of façade components are planes, the topic of automatic extraction of planar features has been studied. The RANSAC algorithm has been chosen among numerous methods. It is a robust estimator frequently used to compute model parameters from a dataset containing outliers, as it occurs in TLS data. Nevertheless, the RANSAC algorithm has been improved in order to extract the most significant planar clusters describing the main features composing the building façades. Subsequently, a second algorithm has been developed for extracting the contours of these features. The innovative idea presented in this paper is the efficient way to detect the points composing the contours. In order to evaluate the performances of both algorithms, they have successively been applied on samples with different characteristics, i.e. densities, types of façades and size of architectural details. Finally, a quality evaluation based on the comparison of planar clusters and contours obtained manually has been carried out. The results prove that the proposed algorithms deliver qualitative as well as quantitative satisfactory results and confirm that both algorithms are reliable for the forthcoming 3D modelling of building façades.
series	journal
last changed	2009/06/23 08:07

_id	ecaade2009_111
id	ecaade2009_111
authors	Cannaerts, Corneel
year	2009
title	Models of / Models for Architecture: Physical and Digital Modelling in Early Design Stages
doi	https://doi.org/10.52842/conf.ecaade.2009.781
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 781-786
summary	This paper questions whether physical and digital models can be seen as models for rather than models of architecture. Stressing the mediated nature of the design process, it questions the role models play in the early stage of architectural design. This research draws from an experimental digital & physical modelling workshop. The conclusion argues for a modelling process that incorporates both physical and digital modelling, and acknowledges the mediated nature of the design process.
wos	WOS:000334282200095
keywords	Modelling, digital, physical
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2009_904
id	sigradi2009_904
authors	Castañe, Maria Dora; Carlos Tessier
year	2009
title	Reconocimiento Patrimonial de Ciudad Intermedia Utilizando Base de Datos Espaciales, y Modelos Urbanos Virtuales [Heritage recognition of intermediate city - Using space data base, and virtual urban models]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This project advances in the research on the urban architectonic cultural heritage of one Buenos Aires intermediate city in order to obtain some lines of proposals on policies of action applied to the chosen city. It is taken as training center of MERCEDE’S city, located in the nor west of Buenos Aires province –Argentina. Within the project digital technological tools of three-dimensional modelling are used and their interphases of space bases with different representational levels of complexity 2d-3d-4d-5d, applied to the recognition and research of the cultural and urban architectonic heritage These would allow to qualify to facilitate other ways to research rescue and re-construct the city, for one better understanding of their present and past.
keywords	Patrimonio; base de datos espaciales; urbanismo; hipermedios; preservación
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	caadria2009_120
id	caadria2009_120
authors	Cheng, Hung-Ming; Ya-ning Yen and Wun-bin Yang
year	2009
title	Digital Archiving in Cultural Heritage Preservation
doi	https://doi.org/10.52842/conf.caadria.2009.093
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 93-102
summary	This project presents a digitizing process of 3D laser scanner for culture heritage. The experimental records are mainly for systematic 3D model reconstruction and digital archiving of historical scenes. The procedures of digital heritage are 3D data acquisition, 3D modelling and web-based representation which demonstrate the reconstructed results and the application of virtual scene.
keywords	Digital archiving; cultural heritage; digital reconstruction; 3D laser scanner
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	cf2009_105
id	cf2009_105
authors	Chevrier, Christine; Perrin, Jean-Pierre
year	2009
title	Generation of architectural parametric components: Cultural heritage 3D modelling
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 105-118
summary	This paper deals with 3D modeling of complex architectural elements for virtual 3D scene reconstruction based on images or point clouds. It presents a new method at the opposite of classical photogrammetry and lasergrammetry techniques: parametric components are created and then adapted to the measured data. We have conceived and developed a parametric shape generator tool for virtual 3D reconstruction of cultural heritage monuments. We present the geometrical study on the cupola shapes with all their diversity. It is illustrated with the Suleymaniyé Mosque in Turkey. The results are promising. The modeling time is greatly reduced.
keywords	3D modeling, architectural component, parametric modeling, cultural heritage
series	CAAD Futures
email
last changed	2009/06/08 20:53

For more results click below: