Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 361

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2009_samir_foura
id	ascaad2009_samir_foura
authors	Foura, Samir and Samira Debache
year	2009
title	Thermal Simulation In Residential Building Within Computer Aided Architectural Design: Integrated model
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 235-243
summary	Nowadays, the architectural profession is seeking a better energy saving in the design of buildings. The fear of energy shortage in the very near future, together with the rapid rise in energy prices, put pressure on researchers on this field to develop buildings with more efficient heating systems and energy systems. This work is concerned mainly with the development of a software program analyzing comfort in buildings integrated in CAD architectural systems. The problem of presenting the computer with information concerning the building itself has been overcome through integration of thermal analysis with the building capabilities of CAD system. Mainly, such experience concerns the rules for calculating heat loss and heat gain of buildings in Algeria, The program has been developed in order to demonstrate the importance of the innovation of the computer aided-architectural-design field (CAAD) in the technology of buildings such as the three dimensional modeling offering environmental thermal analysis. CAAD is an integrated architectural design system which can be used to carry out many tasks such as working drawings, perspectives and thermal studies, etc., all from the same data. Results are obtained in tabular form or in graphical output on the visual display. The principle of this program is that all input data should be readily available to the designer at the early stages of the design before the user starts to run the integrated model. Particular attention is given to the analysis of thermal aspects including solar radiation gains. Average monthly energy requirement predictions have been estimated depending on the building design aspect. So, this integrated model (CAAD and simulation comfort) is supposed to help architects to decide on the best options for improving the design of buildings. Some of these options may be included at the early design stages analysis. Indications may also be given on how to improve the design. The model stored on CAAD system provides a valuable data base for all sort analytical programs to be integrated into the system. The amount of time and expertise required to use complex analytical methods in architectural practice can be successfully overcome by integration with CAAD system.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	acadia09_110
id	acadia09_110
authors	Gharleghi, Mehran; Sadeghy, Amin
year	2009
title	Adaptive Pneus
doi	https://doi.org/10.52842/conf.acadia.2009.110
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 110-117
summary	The research focuses on the performative capacities of a pneumatic material system in regards to the specific environmental conditions. The use of Adaptation as a mechanism to modulate environmental performance was the main focus of the design process and research. The location of the sun during the day acts as a trigger to adapt the system, allowing the system to passively augment the environmental conditions. A new form-finding method that combines digital and material processes has been the main method by which the experiments were undertaken. This approach necessitates a dramatic shift in the architectural design, from producing static to environmentally responsive objects. It requires a shift in thinking from buildings as static and non-active systems to material system existing over time within specific environments capable of complex environmental performances.
keywords	Responsive design, fabrication, prototyping, form finding, solar shading
series	ACADIA
type	Normal paper
email
last changed	2022/06/07 07:51

_id	cf2009_159
id	cf2009_159
authors	Marin, Philippe; Lequay, Hervé and Bignon, Jean-Claude
year	2009
title	Un outil évolutionnaire d’aide à la conception architecturale créative : Mise en oeuvre d’un algorithme génétique et prise en compte des paramètres environnementaux; Evolutionary tool assisting creative architectural design: Implementation of an genetic algorithm and assessment of environmental parameters
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 159-172
summary	This work focuses on the development of a tool capable of assisting and supporting architectural design activity. We propose an evolutionary mechanism through the use of a genetic algorithm. Environmental parameters are convoked to drive the evolution. The solar passive qualities of the object under study allow the energizing evaluation. This paper deals with the interaction between verbal thinking and visual thinking through the use of this generative tool.
keywords	Genetic algorithm, creative design, environmental parameters
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	cf2009_353
id	cf2009_353
authors	Meagher, Mark; Van der Maas, David; Abegg, Christian and Huang, Jeffrey
year	2009
title	Dynamic ornament: Climatically responsive surfaces in architectural design
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 353-366
summary	In recent years, sensors and sensor networks have been broadly employed in buildings to monitor diverse aspects of the built environment. Sensors are commonly used to track indoor and outdoor climatic variables such as humidity, temperature, and solar radiation; and to recognize patterns in the activity of people. We propose that in addition to this common instrumental role, data gathered from sensors could also play an important aesthetic and cultural role in the design of engaging architectural spaces. We describe a design study that explores the use of sensor data as a means to qualitatively differen-tiate between spaces within the building, a role traditionally performed by architectural ornament.
keywords	Sentient architecture, thermochromic ink, sensor networks, ornament
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	acadia09_105
id	acadia09_105
authors	Drozdowski, Ziggy; Gupta, Shawn
year	2009
title	Adaptive Fritting as Case Exploration for Adaptivity in Architecture
doi	https://doi.org/10.52842/conf.acadia.2009.105
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 105-109
summary	This paper explores the incentive, design process, and realization of an adaptable building system. Hoberman Associates’ installation at the Graduate School of Design at Harvard University, Adaptive Fritting, is used as a case study for the more general thesis of mechanism design in architecture. Traditionally seen as expensive and impractical, ‘movement’ in buildings can be accessible if done with high economy and simple elegance. The goal of this example is to illustrate the design process, challenges, constraints and parameters required to realize an adaptable architectural system.
keywords	Adaptable design, fabrication, prototyping, solar shading
series	ACADIA
type	Normal paper
email
last changed	2022/06/07 07:55

_id	cf2009_poster_33
id	cf2009_poster_33
authors	Vanzer, Paul Martin
year	2009
title	Transformation of Housing in the ecology of desert climate: A Bioclimatic -Passive Solar Design vision of the Building integration with a dry environment
source	T. Tidafi and T. Dorta (eds) Joining Languages Cultures and Visions: CAADFutures 2009 CD-Rom
summary	This investigation arises from the need to include the systems of environmental natural conditioning and the architectural project in the ecology of the desert dry-climate. In this research, it is proposed to investigate the main features and techniques used in Southern Peru as an answer to build in a desert environment with high levels of sunlight and very few rain days. Identifying the historic processes of the vernacular architecture, in which we recognize evolved coherent forms, making possible to define the strategies with which to recreate architecture responsive to the ecology of the desert dry- climate.
keywords	Bioclimatic architecture, architecture in desert regions, solar architecture, sustainability, architecture and climate vernacular architecture
series	CAAD Futures
type	poster
last changed	2009/07/08 22:12

_id	acadia09_216
id	acadia09_216
authors	Wiebe, Kimberly; Kensek, Karen; Schiler, Marc
year	2009
title	SonoranSystems: Building Simulation Modeling Using a Crassulacean Acid Metabolism Analogy
doi	https://doi.org/10.52842/conf.acadia.2009.216
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 216-225
summary	Biomimicry is one source of inspiration for innovation in the passive thermal design of buildings and of strategies that decrease the need for auxiliary heating and cooling systems. This paper explores the potential for using analogies drawn from Crassulacean acid metabolism (CAM) to create a software program that simulates selected building materials to predict temporal building temperature variations.
keywords	Simulation, performance, solar, thermal design, parametric design
series	ACADIA
type	Normal paper
email
last changed	2022/06/07 07:57

_id	ascaad2009_mohamed_abdalla
id	ascaad2009_mohamed_abdalla
authors	Abdalla, Mohamed Saad Atia
year	2009
title	3D Model and Decision Support System for Fire Safety: A case study of Kingdom of Bahrain
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 419-430
summary	Fire agencies on all levels try hard to save lives, properties, and natural resources. Accurate access to critical information is essential in this regard, many agencies around the world have embraced GIS as a tool that helps them balance needs, uses, and hazards to promote sustainability of the environment while identifying and limiting vulnerability. At Kingdom of Bahrain, Ministry of interior established the Geographic Security System (GSS) to enhance the emergency response. The 3D of the GSS Consisted of 3 main parts: (1) 3D for terrain model, (2) 3D model for entire targeted zones, and (3) 3D models for individual buildings. In this paper, the integration between GSS system and 3D model will be illustrated, and how this kind of integration could enhance decision support system (DSS) for fire safety at kingdom of Bahrain. On other hand, we will highlight the technical and legislation difficulties faced in this project. Also, the future steps to enhance DSS will be discussed.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	caadria2009_031
id	caadria2009_031
authors	Abdelhameed, Wael
year	2009
title	Cognition Model in Conceptual Designing
doi	https://doi.org/10.52842/conf.caadria.2009.771
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 771-780
summary	Both design researchers and cognitive scientists have developed various process models to study human creative behaviour in design. The models developed are often based on observations of design processes and analysis of design protocols. This research paper reports the-stateof- the-art in the area of cognition models that present design activities in conceptual designing. The research paper investigates the approaches of these cognition models. A new approach of a cognition activity model in conceptual designing is proposed. The new approach used in the introduced model takes into the account factors and activities that are related to the external environment of design (design medium). The external environment has an important role in the cognition activities and the evaluation process in a way that can hardly be ignored or neglected. The presented model of cognition activities in conceptual designing highlights two main factors employed in all the iteration loops of the model, namely: media use and representation. Case studies of architecture students’ designs have been analyzed. The analysis of these case studies helped in forming the proposed model. Various results have been concluded and reported.
keywords	Cognition model; conceptual designing; design process; design theory
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	cf2009_410
id	cf2009_410
authors	Abdelhameed, Wael
year	2009
title	Reciprocal relationship of conceptualization and design problem definition: A proposed approach for an architectural design studio
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 410-422
summary	This research paper proposes an approach to be applied in the design studio. The proposed approach highlights the reciprocal relationship between concept articulation and design problem definition in a design method that exposes different design activities related to this relationship. The design method was applied in a design studio of an intermediate level. The study reports the analysis of student designs in terms of the deign method employed. Moreover, a survey was carried out in order to measure the responses of students and instructors regarding the design method and its approach. The main structure of the design method proposed can be described as follows: although the relationship of concept articulation and design-problem definition are reciprocal, the influence of one direction can be distinguished more than of the other direction on different design activities. The research using qualitative and quantitative methodologies analyzes the results and outputs of the theoretical investigations, the practical application in the design studio, and the questionnaire responses through different methodological tools.
keywords	Conceptual design, design method, architectural design studio
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	ascaad2009_000
id	ascaad2009_000
authors	Abdelhameed, Wael; N. Hamza and A. Bennadji (eds.)
year	2009
title	Digitizing Architecture: Formalization and Content
source	4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009)[ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, 463 p.
summary	CAAD is constantly provoking and raising many potentials, challenges and arguments in academia, practice, and even in the theory of architecture itself. This process starts with the pedagogy of designing and the ongoing questions such as how much of CAAD should be incorporated in teaching, and ends with digital design technologies and the new emerging questions such as how biologically inspired computational processes alter the form of our architecture and the typical design process. Architecture originates from peoples’ needs and beliefs. The new forms of digital architecture generate debates in terms of various important issues, ranging from emotional and social factors to sustainability and warming climate. The focus area of the conference can be shaped, as follows: considering all these potentials, challenges, and arguments, which we have to benefit from and cope with, are there truly legitimate concerns about the future of our architecture and its content in particular from human and environmental dimensions? Can we develop our own ways of benefiting from the technology that cater to our environment and culture? Can we still see the form of architecture in the traditional way or should we change our perspectives? In other words the conference concentrates on bridging between the new digital form and the traditional human content.
series	ASCAAD
type	normal paper
email
last changed	2010/02/26 07:31

_id	cf2009_273
id	cf2009_273
authors	Abdelmohsen, Sherif M. and Do, Ellen Yi-Luen
year	2009
title	Analysing the significance of problem solving expertise and computational tool proficiency in design ideation
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 273-287
summary	This paper presents a pilot study to analyze the role of problem solving expertise (PSE) and computational tool proficiency (CTP) of expert and novice architects in the ideation process within a distributed cognition environment. To analyze PSE, we studied the frequency of occurrence of unique problem solving tasks per limited commitment mode (LCM) revisit. We also devised a quantitative measure for analyzing CTP based on the frequency of unique and normally distributed modeling activities per design process flows for a parametric modeling tool. In our study that involved freehand sketching and parametric modeling as two external representations used in the ideation process, we concluded that expert architects have higher levels of both PSE and CTP than novices.
keywords	Problem solving, distributed cognition, design ideation, parametric modeling, freehand sketching
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	ascaad2009_mai_abdelsalam
id	ascaad2009_mai_abdelsalam
authors	Abdelsalam, Mai
year	2009
title	The Use of the Smart Geometry through Various Design Processes: Using the programming platform (parametric features) and generative components
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 297-304
summary	The emergence of parametric generative design tools and prototyping manufacturing technology led to radical changes in architectural morphologies. This change increased the opportunity to develop innovative smart geometries. Integrating these algorithms in the parametric softwares led to variations in building design concepts increasing alternatives and decreasing the repetitive work previously needed in conventional CAD software. The chosen software in this research is Generative Components (GC). It is a software design tool for an associative and parametric design platform. It is tested for using Global Variables with associative functions during the concept creation and form GC comprises features. The results presented in this research may be considered an introduction to the smart geometry revolution. It deals with the generative design which applied in the design process from conceptual design phase, defining the problem, exploring design solutions, then how to develop the design phases. Office building is a building type which encourages new forms that needs computational processes to deal with repetitive functions and modular spaces and enclosed in a flexible creative structural skin. Generative design helps the office buildings to be arranged, analysed, and optimized using parameters in early stages in design process. By the end of the research, the use of the smart geometry in a high rise office building is defined and explained. The research is divided into three parts, first a summary of the basic theories of office buildings design and the sustainable requirements that affect it, and should be integrated. Secondly, the previous experiences in generating office buildings by Norman foster and Sergio Araya. At last, a case study is proposed to test and evaluate the use of the parametric generative methodology in designing an office building with specific emphasis on the function, environmental aspects and form generation using Generative Components (GC) Software.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ecaade2009_123
id	ecaade2009_123
authors	Achten, Henri; Beetz, Jakob
year	2009
title	What Happened to Collaborative Design?
doi	https://doi.org/10.52842/conf.ecaade.2009.357
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 357-366
summary	In this paper we present the results of a comprehensive literature survey on the development of collaborative design. We reviewed 324 papers on collaborative design, taken from various sources (conferences, journals, and PhD-theses). We grouped the papers based on common themes, and in that way derived a classification of themes through the last 25 years (1983-2008). Each category is described, its development, and key publications are identified.
wos	WOS:000334282200043
keywords	Collaborative design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia18_216
id	acadia18_216
authors	Ahrens, Chandler; Chamberlain, Roger; Mitchell, Scott; Barnstorff, Adam
year	2018
title	Catoptric Surface
doi	https://doi.org/10.52842/conf.acadia.2018.216
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 216-225
summary	The Catoptric Surface research project explores methods of reflecting daylight through a building envelope to form an image-based pattern of light on the interior environment. This research investigates the generation of atmospheric effects from daylighting projected onto architectural surfaces within a built environment in an attempt to amplify or reduce spatial perception. The mapping of variable organizations of light onto existing or new surfaces creates a condition where the perception of space does not rely on form alone. This condition creates a visual effect of a formless atmosphere and affects the way people use the space. Often the desired quantity and quality of daylight varies due to factors such as physiological differences due to age or the types of tasks people perform (Lechner 2009). Yet the dominant mode of thought toward the use of daylighting tends to promote a homogeneous environment, in that the resulting lighting level is the same throughout a space. This research project questions the desire for uniform lighting levels in favor of variegated and heterogeneous conditions. The main objective of this research is the production of a unique facade system that is capable of dynamically redirecting daylight to key locations deep within a building. Mirrors in a vertical array are individually adjusted via stepper motors in order to reflect more or less intense daylight into the interior space according to sun position and an image-based map. The image-based approach provides a way to specifically target lighting conditions, atmospheric effects, and the perception of space.
keywords	full paper, non-production robotics, representation + perception, performance + simulation, building technologies
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	ascaad2009_amal_al-ali
id	ascaad2009_amal_al-ali
authors	Al-Ali, Amal and P. Sharma
year	2009
title	Creativity and Collaboration in Architecture Education in the UAE
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 245-256
summary	A review of national government literature indicates that today’s knowledge-driven economy demands a workforce equipped with complex skills and attitudes. Examples of these skills and attitudes are general problems solving, meta-cognitive skills, critical thinking and lifelong learning. Reviews of the Architecture, Engineering and Construction industry indicates a gap between architecture practice and education. The Egan report states that there is a need for a change of style, culture and process within the construction industry and it identified five driving forces, the report also recognised that the achievement of these driving forces is linked to training and education. Education must not only teach the necessary technical skills and knowledge, but also the culture of teamwork, collaborative work and creativity. The construction boom in the United Arab Emirates combined with the country’s mission to highly educate and train its nationals to be able to tackle market challenges provoked the necessity of implementing the culture of creativity and collaboration in education system. On the other hand, use of technology in education has been proven to facilitate and enhance the learning process. This paper will highlight the importance of implementing the virtual design studio as a technlogical platform in architecture education in the UAE in a way that aims to promote the culture of creativity and collaboration through the use of technology.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ascaad2009_a_al_attili
id	ascaad2009_a_al_attili
authors	Al-Attili, A. and M. Androulaki
year	2009
title	Architectural Abstraction and Representation: The embodied familiarity of digital space
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 305-321
summary	This paper argues that familiarity is the tool that enables the understanding of space abstraction and representation. Familiarity in this context is independent from embodied interaction, and is crudely based on the connection between the various similar images of space; in this particular case, virtual space. Our investigation into the nature of human interaction with space, its abstraction and its representation is based on the critical contrast between the outcomes of interaction with two virtual versions of a physical reality; the first version is a non-linear interactive graphical abstraction of the space where no assertions or indicators are given as to whether or not there is a relationship between the abstraction and its physical reality, whereas the second is a none-linear interactive 3D virtual environment clearly representing the physical space in question. The paper utilises qualitative methods of investigation in order to gain an insight into human embodied experience in space, its abstraction and representation.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ascaad2014_023
id	ascaad2014_023
authors	Al-Maiyah, Sura and Hisham Elkadi
year	2014
title	Assessing the Use of Advanced Daylight Simulation Modelling Tools in Enhancing the Student Learning Experience
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 303-313
summary	In architecture schools, where the ‘studio culture’ lies at the heart of students’ learning, taught courses, particularly technology ones, are often seen as secondary or supplementary units. Successful delivery of such courses, where students can act effectively, be motivated and engaged, is a rather demanding task requiring careful planning and the use of various teaching styles. A recent challenge that faces architecture education today, and subsequently influences the way technology courses are being designed, is the growing trend in practice towards environmentally responsive design and the need for graduates with new skills in sustainable construction and urban ecology (HEFCE’s consultation document, 2005). This article presents the role of innovative simulation modelling tools in the enhancement of the student learning experience and professional development. Reference is made to a teaching practice that has recently been applied at Portsmouth School of Architecture in the United Kingdom and piloted at Deakin University in Australia. The work focuses on the structure and delivery of one of the two main technology units in the second year architecture programme that underwent two main phases of revision during the academic years 2009/10 and 2010/11. The article examines the inclusion of advanced daylight simulation modelling tools in the unit programme, and measures the effectiveness of enhancing its delivery as a key component of the curriculum on the student learning experience. A main objective of the work was to explain whether or not the introduction of a simulation modelling component, and the later improvement of its integration with the course programme and assessment, has contributed to a better learning experience and level of engagement. Student feedback and the grade distribution pattern over the last three academic years were collected and analyzed. The analysis of student feedback on the revised modelling component showed a positive influence on the learning experience and level of satisfaction and engagement. An improvement in student performance was also recorded over the last two academic years and following the implementation of new assessment design.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ascaad2009_hafsa_al_omari
id	ascaad2009_hafsa_al_omari
authors	Al-Omari, Hafsa and Luma Al Dabbagh
year	2009
title	Form in Islamic Architecture: A new vision by using 3D Studio Max program
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 433-450
summary	Architecture is a record of human civilization, values, principles and concepts. Form (elements and relations) is one of the visual features of identity and self on one hand and expressive features of place and time (scientific and technical development ) on the other hand. Creating new forms from historical forms is considered one of the greatest challenges that face the architect. Research problem centered on the importance of form in Islamic architecture, and the possibility of investment a new scientific method ( 3D Studio Max program) in creating contemporary architecture using historical and traditional Islamic forms. Research divides to three sections. The first is a theoretical framework that determines the importance and the generation and the potentiality of form in Islamic architecture. The second studies the traditional methods that has been used to create a contemporary Arab-Islamic architecture using historical references, then introduce 3D Studio Max program as alternative new scientific method to traditional methods contribute to create a new vision of contemporary Arab Islamic architecture. The conclusions identify the importance of form in the Islamic civilization and showed that the generation of form affected by its potentiality. Research opens new methods that have not been studied previously in creating contemporary Islamic architecture by using the modifier stack in 3D Studio Max program.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ecaade2009_170
id	ecaade2009_170
authors	Alaçam Aslan, Sema; Çagdas, Gülen
year	2009
title	Comparison of Designers’ Modeling Approaches During Architectural Design Process
doi	https://doi.org/10.52842/conf.ecaade.2009.753
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 753-758
summary	This study has been started as a part of a research, related to exploring impact of novel interfaces during collaborative architectural design process on designers’ way of thinking. However, in this paper it is intended to focus on how the input devices reflect on designers’ modeling behavior in computer environment. Therefore it is intended to compare designer’s modeling approaches in computer environment via a case study. Four master students in architectural design computing graduate program have attended to the case study. The findings of the case study is presented and evaluated in the discussion section.
wos	WOS:000334282200091
keywords	Architectural modeling, design interface, interactive techniques, human-computer interaction
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

For more results click below: