Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 593

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2009_amal_al-ali
id	ascaad2009_amal_al-ali
authors	Al-Ali, Amal and P. Sharma
year	2009
title	Creativity and Collaboration in Architecture Education in the UAE
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 245-256
summary	A review of national government literature indicates that today’s knowledge-driven economy demands a workforce equipped with complex skills and attitudes. Examples of these skills and attitudes are general problems solving, meta-cognitive skills, critical thinking and lifelong learning. Reviews of the Architecture, Engineering and Construction industry indicates a gap between architecture practice and education. The Egan report states that there is a need for a change of style, culture and process within the construction industry and it identified five driving forces, the report also recognised that the achievement of these driving forces is linked to training and education. Education must not only teach the necessary technical skills and knowledge, but also the culture of teamwork, collaborative work and creativity. The construction boom in the United Arab Emirates combined with the country’s mission to highly educate and train its nationals to be able to tackle market challenges provoked the necessity of implementing the culture of creativity and collaboration in education system. On the other hand, use of technology in education has been proven to facilitate and enhance the learning process. This paper will highlight the importance of implementing the virtual design studio as a technlogical platform in architecture education in the UAE in a way that aims to promote the culture of creativity and collaboration through the use of technology.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ascaad2014_023
id	ascaad2014_023
authors	Al-Maiyah, Sura and Hisham Elkadi
year	2014
title	Assessing the Use of Advanced Daylight Simulation Modelling Tools in Enhancing the Student Learning Experience
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 303-313
summary	In architecture schools, where the ‘studio culture’ lies at the heart of students’ learning, taught courses, particularly technology ones, are often seen as secondary or supplementary units. Successful delivery of such courses, where students can act effectively, be motivated and engaged, is a rather demanding task requiring careful planning and the use of various teaching styles. A recent challenge that faces architecture education today, and subsequently influences the way technology courses are being designed, is the growing trend in practice towards environmentally responsive design and the need for graduates with new skills in sustainable construction and urban ecology (HEFCE’s consultation document, 2005). This article presents the role of innovative simulation modelling tools in the enhancement of the student learning experience and professional development. Reference is made to a teaching practice that has recently been applied at Portsmouth School of Architecture in the United Kingdom and piloted at Deakin University in Australia. The work focuses on the structure and delivery of one of the two main technology units in the second year architecture programme that underwent two main phases of revision during the academic years 2009/10 and 2010/11. The article examines the inclusion of advanced daylight simulation modelling tools in the unit programme, and measures the effectiveness of enhancing its delivery as a key component of the curriculum on the student learning experience. A main objective of the work was to explain whether or not the introduction of a simulation modelling component, and the later improvement of its integration with the course programme and assessment, has contributed to a better learning experience and level of engagement. Student feedback and the grade distribution pattern over the last three academic years were collected and analyzed. The analysis of student feedback on the revised modelling component showed a positive influence on the learning experience and level of satisfaction and engagement. An improvement in student performance was also recorded over the last two academic years and following the implementation of new assessment design.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ascaad2009_hussein_albotany
id	ascaad2009_hussein_albotany
authors	Albotany, Hussein S.
year	2009
title	Development of Digital City Models Using 3d GIS
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 409-418
summary	“Digital city” is a copy of an actual city in the virtual space. It is expected to play an important role in urban planning, disaster simulation etc. Recent advanced remote sensing technologies, which are capable to quickly provide detailed information of city areas, ease the construction of 3D city models. Urbanization has evinced interest from a wide section of the society including experts, amateurs and novices. With the development and infrastructure initiatives mostly around the urban centers, the impacts of urbanization and sprawl would be on the environment and the natural resources. The research introduces an application of 3D GIS on Manama City.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	sigradi2021_50
id	sigradi2021_50
authors	Albuquerque, Dilson and Andrade, Max
year	2021
title	The Impacts of Collaboration and Cordination of Architectural and Engineering Projects Developed with BIM in Reducing Design Interferences
source	Gomez, P and Braida, F (eds.), Designing Possibilities - Proceedings of the XXV International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2021), Online, 8 - 12 November 2021, pp. 783–794
summary	This paper addresses the importance and development of cultural transformations involving the design process in architecture and the advent of Building Information Modeling (BIM) in civil construction activities and how its implementation in a coordinated, collaborative and interoperable way contributes to a diagnosis of Clash Detection between diferentes design projects, before building construction, saving excessive costs and rework. Taking as its main reference the BIM Maturity Matrix of Succar (2009), the proposed BIM Project Integration Maturity Matrix contributes to the awareness of bringing designers and builders closer to design activities, to encourage the integration of design processes involving the building, to consolidate an environment of ease of communication between participants, the organization of documentation and, above all, prioritize the compatibility between projects to avoid conflicts, excess costs and rework, resulting in a higher quality of the final project.
keywords	Coordenaçao de projetos, detecçao de interferencias, Building Information Modeling, matriz de avaliaçao, projeto integrado
series	SIGraDi
email
last changed	2022/05/23 12:11

_id	sigradi2009_709
id	sigradi2009_709
authors	Angulo, Antonieta; John Fillwalk; Guillermo Vásquez de Velasco
year	2009
title	Collaborating in a Virtual Architectural Environment: The Las Americas Virtual Design Studio (LAVDS) populates Second Life
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	The paper describes exploratory work in the design, construction, and habitation of a virtual structure (VS) nested within an Internet-based multi-user environment and serving a geographically distributed collective of architecture students and faculty. In addition to a discourse on the design and implementation parameters that were used, the paper seeks to provide findings that make reference to the quality of teaching/learning experience of users and the effectiveness of the interaction among users while working on a common architectural design project. This experience will further contribute to the knowledge base that will be needed in the design of virtual architecture.
keywords	Virtual design studio; Second Life; Multi-user environment; Architectural design and learning
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia17_102
id	acadia17_102
authors	Aparicio, German
year	2017
title	Data-Insight-Driven Project Delivery: Approach to Accelerated Project Delivery Using Data Analytics, Data Mining and Data Visualization
doi	https://doi.org/10.52842/conf.acadia.2017.102
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 102-109
summary	Today, 98% of megaprojects face cost overruns or delays. The average cost increase is 80% and the average slippage is 20 months behind schedule (McKinsey 2015). It is becoming increasingly challenging to efficiently support the scale, complexity and ambition of these projects. Simultaneously, project data is being captured at growing rates. We continue to capture more data on a project than ever before. Total data captured back in 2009 in the construction industry reached over 51 petabytes, or 51 million gigabytes (Mckinsey 2016). It is becoming increasingly necessary to develop new ways to leverage our project data to better manage the complexity on our projects and allow the many stakeholders to make better more informed decisions. This paper focuses on utilizing advances in data mining, data analytics and data visualization as means to extract project information from massive datasets in a timely fashion to assist in making key informed decisions for project delivery. As part of this paper, we present an innovative new use of these technologies as applied to a large-scale infrastructural megaproject, to deliver a set of over 4,000 construction documents in a six-month period that has the potential to dramatically transform our industry and the way we deliver projects in the future. This paper describes a framework used to measure production performance as part of any project’s set of project controls for accelerated project delivery.
keywords	design methods; information processing; data mining; big data; data visualization
series	ACADIA
email
last changed	2022/06/07 07:55

_id	sigradi2009_957
id	sigradi2009_957
authors	Baerlecken, Daniel Michael; Gernot Riether
year	2009
title	From texture to volume: an investigation in quasi-crystalline systems
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	The relation between texture, pattern and massing is a fundamental question in architecture. Classical architecture, as Leon Battista Alberti states in “De re aedificatoria” (Book VI, Chapter 2), is developed through massing and structure first; texture is added afterwards to give the bold massing and structure beauty. Only the ornamentation adds pulcritudo to the raw structure and massing. Rather than starting with a volume and applying texture afterwards, the Digital Girih project started with textural operations that informed the overall volume later. The stereometric, top-down methodology is questioned through the bottom-up methodology of the Girih project. Girih lines of traditional Islamic patterns were used as a starting point. The aspect of 3-dimensionality was developed analogue as well as digital, using the deformability of different materials at various scales and digital construction techniques as parameters. The flexibility within the Girih rules allowed the system to adapt to different tasks and situations and to react to different conditions between 2- and 3- dimensionality. The project in that way explored a bottom-up process of form generation. This paper will describe the process of the project and explain the necessity of digital tools, such as Grasshopper and Rhino, and fabrication tools, such as laser cutter and CNC fabrication technology, that were essential for this process.
keywords	Generative Design; Parametric Design; Tessellation; Form Finding; Scripting
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadia09_82
id	acadia09_82
authors	Bitonti, Francis
year	2009
title	Computational Tectonics
doi	https://doi.org/10.52842/conf.acadia.2009.082
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 82-89
summary	The goal of this research is to define a methodology for the construction of complex non-repeating surfaces and structures that rely on the formulation of a singular tectonic mechanism. Computational systems like cellular automata seem to suggest that it might be possible for modular material systems to self-assemble into complex organizations. A single series of modular parts could be capable of producing not only complex behavior, but also, depending on initial conditions, simple periodic behavior. The research outlined in this paper uses simple geometric transformations to produce tectonic computers that can be applied to a variety of building systems. This paper outlines a methodology for encoding and decoding material assemblages as discrete computational systems. Exploiting the combinatorial nature of tectonic systems makes it possible to produce a population of “material algorithms” capable of exhibiting a wide range of behaviors. Encoding assemblages as discrete systems affords the designer the ability to enumerate and search all possible permutations of a tectonic system. In this paper, we will discuss the calculations and computational processes used to encode material assemblages as populations of discrete algorithms.
keywords	Fabrication, modular system, structure, enumeration systems, material algorithms
series	ACADIA
type	Normal paper
email
last changed	2022/06/07 07:52

_id	ecaade2011_136
id	ecaade2011_136
authors	Bohnenberger, Sascha; de Rycke, Klaas; Weilandt, Agnes
year	2011
title	Lattice Spaces: Form optimisation throgh customization of non developable 3d wood surfaces
doi	https://doi.org/10.52842/conf.ecaade.2011.751
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.751-758
summary	This paper discusses a collaborative project by RDAI architects, Bollinger+Grohmann and the timber construction company Holzbau Amann. The project is located in a former swimming pool in Paris and it is part of the new interior of a flagship store of the French fashion label Hermes. In late 2009, Rena Duma Architects, asked Bollinger+Grohmann to collaborate as structural engineers on a challenging design proposal within a very short timeframe. Three wooden lattice structures, the so-called “bulle” and one monumental staircase with a similar design approach characterize the interior of the new flagship store. The lattice structures are dividing the basement into different retail spaces. They vary in height (8-9 m) and diameter (8-12 m) and have a free-form shaped wicker basket appearance. Wood was the chosen material for these structures to strengthen the idea of the wickerbaskets and to create an interior space with a sustainable and innovative material.
wos	WOS:000335665500087
keywords	Digital production; parametric design; mass customization; wood; digital crafting
series	eCAADe
email
last changed	2022/05/01 23:21

_id	4f1b
id	4f1b
authors	Booth, Peter
year	2009
title	Digital Materiality: emergent computational fabrication
source	Performative Ecologies in the Built Environment: Sustainability Research Accross Disciplines: 43rd Annual Conference of the Australian and New Zealand Architectural Science Association
summary	Fundamentally architecture is a material-based practice that implies that making and the close engagement of materiality is intrinsic to design process. With the rapid uptake of new computational tools and fabrication techniques by the architectural profession there is potential for the connection between architecture and materiality to be diminished. Innovative digital technologies are redefining the relationship between design and construction encoding in the process new ways of thinking about architecture. A new archetype of sustainable architectural process is emerging, often cited as Digital Materialism. Advanced computational processes are moving digital toolsets away from a representational mode towards being integral to the design process. These methods are allowing complex design variables (material, fabrication, environment, etc.) to be interplayed within the design process, allowing an active relationship between performative criteria and design sustainability to be embedded within design methodology.
keywords	Digital, Process, Material, Fabrication
series	other
type	normal paper
email
last changed	2010/03/06 02:53

_id	ijac202119302
id	ijac202119302
authors	BuHamdan, Samer; Alwisy, Aladdin; Bouferguene, Ahmed
year	2021
title	Generative systems in the architecture, engineering and construction industry: A systematic review and analysis
source	International Journal of Architectural Computing 2021, Vol. 19 - no. 3, 226–249
summary	Researchers have been extensively exploring the employment of generative systems to support design practices in the architecture, engineering and construction industry since the 1970s. More than half a century passed since the first architecture, engineering and construction industry’s generative systems were developed; researchers have achieved remarkable leaps backed by advances in computing power and algorithms’ capacity. In this article, we present a systematic analysis of the literature published between 2009 and 2019 on the utilization of generative systems in the design practices of the architecture, engineering and construction industry. The present research studies present trends, collaborations and applications of generative systems in the architecture, engineering and construction industry in order to identify existing shortcomings and potential advancements that balance the need for theory development and practical application. It provides insightful observations that are translated into meaningful recommendations for future research necessary to progress the incorporation of generative systems into the design practices of the architecture, engineering and construction industry.
keywords	Generative systems, architecture, engineering and construction industry, performative design, generative design, systematic literature review, future directions
series	journal
email
last changed	2024/04/17 14:29

_id	sigradi2009_1012
id	sigradi2009_1012
authors	Celani, Gabriela; Laura Cancherini
year	2009
title	Digitalização tridimensional de objetos: um estudo de caso [Scanning Three-dimensional Objects: A Case Study]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	The present research is an exploratory study about medium-range 3D-scanning technologies for architectural applications. Its purpose was to gather information that will subside the future acquisition of a 3D-scanning equipment for the Laboratory for Automation and Prototyping for Architecture and Construction, LAPAC, at the University of Campinas (UNICAMP). In order to test some of these technologies, some experiments were carried out. Museum sculptures were digitized and the results were 3D-printed. Preliminary results show that accurate technologies are still very expensive, but there are some alternative, more accessible technologies, based on photogrammetry, which can lead to fairly good results.
keywords	Digitalização 3D; scanner 3D; photogrametria; maquete arquitetônica.
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	cf2009_poster_37
id	cf2009_poster_37
authors	Chen, Tzu-Hao
year	2009
title	Construction Improvements for the Making of Free-Form Glass Surfaces
source	T. Tidafi and T. Dorta (eds) Joining Languages Cultures and Visions: CAADFutures 2009 CD-Rom
summary	The development of computer technology and new media in architecture has given new rise to the creativity of designers and lead architecture to new break through in construction. The making of CAD/CAM free-form structures, can be divided into the making of curved surfaces and the skeleton.
series	CAAD Futures
type	poster
last changed	2009/07/08 22:12

_id	caadria2009_012
id	caadria2009_012
authors	Chiu, Hao-Hsiu
year	2009
title	Research on Hybrid Tectonic Methodologies for Responsive Architecture
doi	https://doi.org/10.52842/conf.caadria.2009.493
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 493-502
summary	This research intends to provide a comprehensive understanding and tectonic patterns of responsive architecture. By qualitatively analyzing a series of critical responsive buildings from Ito’s early Wind Tower through Diller and Scofidio’s Blur Building to Cloud 9’s recent Habitat Hotel, tectonic themes of “lightness”, “morphing”, ”improvisation”, and “networking” are set to the elucidate methodological relationships between their tectonic expressions and design concepts. Based on these designated themes, manipulation of materiality, techniques of construction, and mechanism of responsiveness in the studied cases are comparatively discussed and demonstrated with visualization of their tectonic design patterns. The objective of this research is to stress on the importance of tectonic consistency and offer evidences in combining physical components with digital configurations in order to achieve poetic expressions of structure, function, as well as aesthetics so that genuine spatial quality for digital era can be truly revealed.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	acadia09_201
id	acadia09_201
authors	De Kestelier, Xavier; Buswell, Richard
year	2009
title	A Digital Design Environment for Large- Scale Rapid Manufacturing
doi	https://doi.org/10.52842/conf.acadia.2009.201
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 201-208
summary	Innovation in architectural design often follows technological innovation. This innovation can often be related to advances in construction techniques or design tools. This paper focuses on the development of a digital design environment for a new manufacturing process that can produce large architectural components. The design environment can be customized so that it incorporates both the flexibility and the constraints of the construction technology, such that the components produced maximize the core concept of the technology. Rapid Prototyping is a mature technology that has been around for 25 years in the manufacturing and product design industries. It is used primarily to speed up the product design cycle time from concept to physical realization for evaluation; it is now gaining a foothold in contemporary architectural practice. A number of protagonists are taking the Rapid Prototyping concept a stage further by developing large-scale processes capable of printing architectural components; there are even claims of the ability to produce whole buildings. These processes will give the architect a new palette of choice in terms of component design, and promise similar levels of geometric freedom as the Rapid Prototyping counterparts.
keywords	Rapid prototyping, fabrication, hardware, concrete printing
series	ACADIA
type	Normal paper
email
last changed	2022/06/07 07:55

_id	cf2009_585
id	cf2009_585
authors	E. Swarts, Matthew; A. Sheward, Hugo
year	2009
title	Using multi-level virtual environments as a medium for conducting design review through a shared IFC dataset
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 585- 597
summary	For a long time the Architecture-Engineering-Construction (AEC) community has had difficulty in communicating the content of their work, not only the various specialties involved, but also to their clients. Studies (Doorst and Cross 2001; Bakhtin 1994) suggest the importance of multi-role collaborative environments in supporting design processes. We are developing a Multi Level Design Review Tool for the AEC industry which allows multiple actors to congregate and interact as agents around a central Building Model. It merges real-time virtual 3D visualization technologies with Industry Foundation Classes (IFC) to support both high levels of semantic content and seamless interoperability.
keywords	Design review, virtual environment, interoperability
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	ecaadesigradi2019_046
id	ecaadesigradi2019_046
authors	Ferreira Borges, Marina
year	2019
title	Conversations between architects and engineers
doi	https://doi.org/10.52842/conf.ecaade.2019.1.099
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 99-108
summary	The structural education in architectural schools emphasize that the dialogue between professionals is what should be raised as the point of connection between the conception of the structural morphology to be carried out by the architect and its validation and construction by the structural engineer. However, is this dialogue occurring? The proposal of this work is to study the conversational model proposed by Paul Pangaro (2009), based on Gordon Pask's Conversation Theory (1976a), and investigate if in fact a dialogic process between architectural design and structures education in architectural schools occurs, or if there exist the possibility of proposing a new conversational model, promoting transdisciplinary participation and collaboration procedures.Please write your abstract here by clicking this paragraph.
keywords	Architectural Design Teaching; Structural Education; Conversation Theory
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:56

_id	sigradi2009_792
id	sigradi2009_792
authors	Flório, Wilson
year	2009
title	Modelagem Paramétrica em Arquitetura: Estratégias para Materializar Formas Complexas [Parametric Modeling in Architecture:strategies to materializing complex shapes]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This research investigates the relation between parametric modeling (PM) and digital fabrication (DF) of complex shapes in architecture. The complexity involving the recent designs in architecture has demanded new procedures, as much during the conception as to make possible its construction. Thus, the PM and the DF have allowed architects and engineers conceiving, detailing and constructing complex structures with more precision and faster. In this paper, the author contributes for a discussion in this field, still incipient in Brazil, particularly in the process of PM teach-learning.
keywords	Parametric Modeling; Digital Fabrication; Construction; Contemporary Architecture; Complexity
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	acadia09_90
id	acadia09_90
authors	Fox, Michael
year	2009
title	Flockwall: A Full-Scale Spatial Environment with Discrete Collaborative Modules
doi	https://doi.org/10.52842/conf.acadia.2009.090
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 90-97
summary	The paper highlights a built example of a human-scale spatial environment composed of discrete collaborative modules. The primary goals were to develop and understand strategies that can be applied to interactive architecture. The design and construction were carried out in an academic context that was displayed to a public audience of approximately 200,000 people over the course of three days. In addressing the performance parameters of the prototype, the concept focused on several key strategies: 1) geometry 2) movement 3) connections 4) scale and 5) computational control, and human interaction. The final objective of the approach was to create an innovative design that was a minimally functional spatial environment with the capability for evolving additional multi-functionality. Heavy emphasis was placed on creating a full-scale environment that a person could walk through, interact with, and experience spatially.
keywords	Geometry, design logic, flock behavior, prototype, fabrication, responsive systems
series	ACADIA
type	Normal paper
email
last changed	2022/06/07 07:50

For more results click below: