Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 592

Reformat results as: short short into frame detailed detailed into frame

_id	cf2011_p060
id	cf2011_p060
authors	Sheward, Hugo; Eastman Charles
year	2011
title	Preliminary Concept Design (PCD) Tools for Laboratory Buildings, Automated Design Optimization and Assessment Embedded in Building Information Modeling (BIM) Tools.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 451-476.
summary	The design of laboratory buildings entails the implementation of a variety of design constraints such as building codes; design guidelines and technical requirements. The application of these requires from designers the derivation of data not explicitly available at early stages of design, at the same time there is no precise methodology to control the consistency, and accuracy of their application. Many of these constraints deal with providing secure environmental conditions for the activities inside laboratories and their repercussions both for the building occupants and population in general, these constraints mandate a strict control over the building‚Äôs Mechanical Equipment (MEP), in particular the Heating Ventilating and Air Conditioning (HVAC) system. Due to the importance of these laboratory designers are expected to assess their designs not only according spatial relationships, but also design variables such as HVAC efficiency, air pressure hierarchies, operational costs, and the possible implications of their design decisions in the biological safety of the facility. At this point in time, there are no practical methods for making these assessments, without having constant interaction with HVAC specialists. The assessment of laboratory design variables, particularly those technical in nature, such as dimensioning of ducts or energy consumption are usually performed at late stages of design. They are performed by domain experts using data manually extracted from design information, with the addition of domain specific knowledge, the evaluation is done mostly through manual calculations or building simulations. In traditional practices most expert evaluations are performed once the architectural design have been completed, the turn around of the evaluation might take hours or days depending on the methods used by the engineer, therefore reducing the possibility for design alternatives evaluation. The results of these evaluations will give clues about sizing of the HVAC equipment, and might generate the need for design reformulations, causing higher development costs and time delays. Several efforts in the development of computational tools for automated design evaluation such as wheel chair accessibility (Han, Law, Latombe, Kunz, 2002) security and circulation (Eastman, 2009), and construction codes (ww.Corenet.gov.sg) have demonstrated the capabilities of rule or parameter based building assessment; several computer applications capable of supporting HVAC engineers in system designing for late concept or design development exist, but little has been done to assess the capabilities of computer applications to support laboratory design during architectural Preliminary Concept Design(PCD) (Trcka, Hensen, 2010). Developments in CAD technologies such as Building Information Modeling (BIM) have opened doors to formal explorations in generative design using rule based or parametric modeling [7]. BIM represents buildings as a collection of objects with their own geometry, attributes, and relations. BIM also allows for the definition of objects parametrically including their relation to other model objects. BIM has enabled the development of automated rule based building evaluation (Eastman, 2009). Most of contemporary BIM applications contemplate in their default user interfaces access to design constraints and object attribute manipulations. Some even allow for the application of rules over these. Such capabilities make BIM viable platforms for automation of design data derivation and for the implementation of generative based design assessment. In this paper we analyze the possibilities provided by contemporary BIM for implementing generative based design assessment in laboratory buildings. In this schema, domain specific knowledge is embedded in to the BIM system as to make explicit design metrics that can help designers and engineers to assess the performance of design alternatives. The implementation of generative design assessments during PCD can help designers and engineers to identify design issues early in the process, reducing the number of revisions and reconfigurations in later stages of design. And generally improving design performance.
keywords	Heating ventilating and Air Conditioning (HVAC), Building Information Models (BIM), Generative Design Assessment
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cf2009_037
id	cf2009_037
authors	Forgues, Daniel; Eugenie, Yoann
year	2009
title	Un « collaboratoire » comme nouveau contexte pour la transformation des pratiques via la technologie; A "collaboratory" as a new context for transforming practices through technology
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 37-50
summary	Building design is today a major social, economic and environmental challenge. Design is also a source of innovation and an important economic driving force that requires the collaboration of professionals from various fields of expertise. But the traditional linear approach in design has shown its limits, and it often leads to non optimal design solutions and buildings with inadequate performances. This paper aims to validate a computer supported collaborative workspace that facilitates the participation, in an integrated approach, of the various members of a construction project team. The goal of the research is to be part of the evolution of work practices in design.
keywords	Integrated design, collaborative workspace, task performance
series	CAAD Futures
type	normal paper
email
last changed	2009/06/09 07:11

_id	ascaad2009_samir_foura
id	ascaad2009_samir_foura
authors	Foura, Samir and Samira Debache
year	2009
title	Thermal Simulation In Residential Building Within Computer Aided Architectural Design: Integrated model
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 235-243
summary	Nowadays, the architectural profession is seeking a better energy saving in the design of buildings. The fear of energy shortage in the very near future, together with the rapid rise in energy prices, put pressure on researchers on this field to develop buildings with more efficient heating systems and energy systems. This work is concerned mainly with the development of a software program analyzing comfort in buildings integrated in CAD architectural systems. The problem of presenting the computer with information concerning the building itself has been overcome through integration of thermal analysis with the building capabilities of CAD system. Mainly, such experience concerns the rules for calculating heat loss and heat gain of buildings in Algeria, The program has been developed in order to demonstrate the importance of the innovation of the computer aided-architectural-design field (CAAD) in the technology of buildings such as the three dimensional modeling offering environmental thermal analysis. CAAD is an integrated architectural design system which can be used to carry out many tasks such as working drawings, perspectives and thermal studies, etc., all from the same data. Results are obtained in tabular form or in graphical output on the visual display. The principle of this program is that all input data should be readily available to the designer at the early stages of the design before the user starts to run the integrated model. Particular attention is given to the analysis of thermal aspects including solar radiation gains. Average monthly energy requirement predictions have been estimated depending on the building design aspect. So, this integrated model (CAAD and simulation comfort) is supposed to help architects to decide on the best options for improving the design of buildings. Some of these options may be included at the early design stages analysis. Indications may also be given on how to improve the design. The model stored on CAAD system provides a valuable data base for all sort analytical programs to be integrated into the system. The amount of time and expertise required to use complex analytical methods in architectural practice can be successfully overcome by integration with CAAD system.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	sigradi2009_779
id	sigradi2009_779
authors	Lima, Thais Borges Sanches; Cláudia Naves David Amorim; Giselle Marie Cormier Chaim
year	2009
title	Simulação do Desempenho Energético de Edifícios de Escritórios em Brasília [Energy performance simulation of Brasília’s office buildings]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This paper presents a parametric analysis where WWR and color glass was varied to determine their influence in the thermal performance of an office building’s room. Design Builder tool was used to calculate the thermal load and the internal gains. The WWR variation in different orientations resulted in a significant increase of the thermal load. The reflective glass allowed a better thermal performance of the room. With the use of computer simulation was possible to analyse many constructive and design characteristics of the facade and its influence on the results, when considered together.
keywords	Energy performance; office buildings; computer simulation; Design Builder
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	sigradi2009_1180
id	sigradi2009_1180
authors	Neves, Isabel Clara
year	2009
title	Aproximações da Arquitectura à Biologia: Levantamento interpretativo de experimentações contemporâneas [Biology approximations in Architecture: Interpretative survey of contemporary experiments]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	It is appropriate to investigate the potential analogies between architecture and biology enabled by the use of digital processes, thereby testing the effectiveness of the application of biological principles to the lifecycle of buildings. The aim of this paper is to understand the way architects integrate and develop different biological approaches to architecture, by mapping the present situation and identifying the trends for future developments. Three major approaches were identified: biomimetics, bionics and biotechnology. The use of biological knowledge and technology in architecture, could pave the way for solutions to current problems, such as energy shortage, climate change, and lifestyle diversity.
keywords	Architecture; technology; biomimetics; bionics; biotechnology
series	SIGRADI
email
last changed	2016/03/10 09:56

_id	ascaad2009_bhzad_sidawi
id	ascaad2009_bhzad_sidawi
authors	Sidawi, Bhzad
year	2009
title	The Consideration of Lifelong Owner’s and Property’s Characteristics in Nd Cad System: The case of affordable housing in kingdom of Saudi Arabia
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 191-204
summary	Residential property value is affected by several factors during its useful time. . These factors include people’s lifestyles, traditions and culture, and the way they live and interact with the built environment. The property characteristics such as its location, building quality, adaptability, and energy efficiency would also have an impact on the property value. On the other hand, the nD CAD research that emerged in the late 1990s proposed endless dimensions of CAD modelling that would incorporate the building regulations’ requirements, basic user needs and client requirements. However, there is a need to implement lifelong parameters that would have significant effect on the property value in 3D models during the early stages of design. This can be done through a knowledge base integrated into a 3D model and links the lifelong property’s and the user’s characteristics with the property’s value. A survey was carried out on banks and Real Estate Development Fund (REDF) in the Kingdom of Saudi Arabia to find out the level of impact of lifelong users and property characteristics on the property’s value. The results of the survey showed a number of lifelong property and user driven parameters that may have major impact on the property’s value. The implementation of lifelong parameters in nD CAD models would have a number of benefits. It would provide the decision makers such as banks and investors with a tool to assess the level of impact of possible lifelong factors on the property value and consider alternative schemes. Designers would use it during the early stages of design to produce optimum design solutions that provide an adequate product that is evaluated regarding its lifelong value to the end users. Eventually it would provide a comfortable environment that is tailored to the user’s needs and aspirations, while reserving the property’s lifelong value.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	cf2009_poster_23
id	cf2009_poster_23
authors	Thorpe, Graham and Sam Kashuk
year	2009
title	A Syncretization Of Architecture, Engineering And Science:The use of CAD technology as a pedagogical tool in the teaching of environmentally sustainable design
source	T. Tidafi and T. Dorta (eds) Joining Languages Cultures and Visions: CAADFutures 2009 CD-Rom
summary	Energy consumption in buildings is responsible for about 40% of Australia’s greenhouse gas emissions. It is quite feasible that the energy consumption in buildings can be halved, but energy performance analysis must be integral to the entire design process. This imperative has led the authors to propose that architecture, engineering and science should be syncretized in the design process. This syncretization shares some features of the rhizomatic approach introduced by Deleuze and Guattari (2007). In rhizomatic systems all points can be, and should be connected. A rhizome can be considered as a space that develops, not from a point but from milieux. In the expansion of a rhizome, elements of the system do not follow tracings of other elements but they form a map of new vistas. Likewise, a syncretic approach is oblivious to the traditional boundaries between architecture, engineering and science. Syncretization has the potential to enrich the intellectual lives of architects, scientists and engineers, and it would have profoundly beneficial performative benefits.
keywords	Syncretic, rhizome architecture, engineering, sustainability, education
series	CAAD Futures
type	poster
last changed	2009/07/08 22:12

_id	acadia13_109
id	acadia13_109
authors	Thün, Geoffrey; Velikov, Kathy
year	2013
title	Adaptation as a Framework for Reconsidering High-Performance Residential Design: A Case Study
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 109-118
doi	https://doi.org/10.52842/conf.acadia.2013.109
summary	This paper outlines an approach to adaptive residential design explored through recent research and an executed prototype, the North House project (2007-2009), undertaken through an interdisciplinary collaboration of researchers and students from the University of Waterloo, Ryerson University and Simon Fraser University in concert with professional and industry partners. This project aimed to develop a framework for the delivery of adaptive detached residential buildings capable of net-zero energy performance in the temperate climate zone, or the near north. Within this project, the term “adaptive” is developed across several tracts of conceptualization and execution including site and climatically derived models for building material composition and envelope ratios, environmentally-responsive kinetic envelope components, intelligent HVAC controls and interactive interface design aimed at producing co-evolutionary behaviors between building systems and inhabitants. A provisional definition of adaptive architecture is outlined to address this range of considerations that calls into question the stable image of domestic architecture and its relationship to energy and contemporary assumptions regarding sustainable design. This paper also outlines computational approaches to design optimization, distributed building systems integration and the human-controls interfaces applicable to the home’s ecology of physical and information technologies.
keywords	next generation technology, responsive buildings, high performance envelopes, sensing and feedback, passive and active systems, energy modeling, user interface
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:58

_id	ecaade2009_108
id	ecaade2009_108
authors	Del Signore, Marcella; Cantrell, Bradley; Roppo, Barbara
year	2009
title	HYBRIDS: Urban Systems and Information
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 843-850
doi	https://doi.org/10.52842/conf.ecaade.2009.843
wos	WOS:000334282200103
summary	Digital tools are transforming design pedagogy by continuously redefining approaches to design processes and methodologies. A recurring theme in design education is the link between the analytical processes and the project development. While the investigations are formulated during the first phase, one typically moves back and forth between the two, allowing ideas created from the analysis to influence and modify the overall design directions. The data created through digital tools can be manipulated, altered, modified and, because of its inherent properties, carried throughout the overall design process. The focus of “Hybrids” seminar was to develop a strategy in which the analytical information and data created through digital tools, were able to inform a synergistic analog:digital design process. The seminar asked students to develop a temporary installation at the New Orleans Riverfront (Figure 1) focusing on the liminal condition that exists between the city and waters edge. The site is a nodal point between the French Quarter and the river that presents different levels of information and acts as a threshold between the city and the water edge.
keywords	New design concepts and strategies, simulation, prediction and evaluation, modes of production
series	eCAADe
email
last changed	2022/06/07 07:55

_id	caadria2009_055
id	caadria2009_055
authors	Park, Hyoung-June
year	2009
title	Body + Space
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 85-92
doi	https://doi.org/10.52842/conf.caadria.2009.085
summary	This paper reports a process of designing a kinetic structure that offers an interactive environment where one can experience the continuum of body and space. The structure emulates ten body movements, derived from the principles of physical Zen training as its transforming mechanism. In this paper, the series of computational methods for establishing the mapping between morphological transformations of the movements and the geometries of the structure are demonstrated.
keywords	Interactive environment; body movements; mapping
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	ascaad2009_mohamed_abdalla
id	ascaad2009_mohamed_abdalla
authors	Abdalla, Mohamed Saad Atia
year	2009
title	3D Model and Decision Support System for Fire Safety: A case study of Kingdom of Bahrain
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 419-430
summary	Fire agencies on all levels try hard to save lives, properties, and natural resources. Accurate access to critical information is essential in this regard, many agencies around the world have embraced GIS as a tool that helps them balance needs, uses, and hazards to promote sustainability of the environment while identifying and limiting vulnerability. At Kingdom of Bahrain, Ministry of interior established the Geographic Security System (GSS) to enhance the emergency response. The 3D of the GSS Consisted of 3 main parts: (1) 3D for terrain model, (2) 3D model for entire targeted zones, and (3) 3D models for individual buildings. In this paper, the integration between GSS system and 3D model will be illustrated, and how this kind of integration could enhance decision support system (DSS) for fire safety at kingdom of Bahrain. On other hand, we will highlight the technical and legislation difficulties faced in this project. Also, the future steps to enhance DSS will be discussed.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ascaad2009_mai_abdelsalam
id	ascaad2009_mai_abdelsalam
authors	Abdelsalam, Mai
year	2009
title	The Use of the Smart Geometry through Various Design Processes: Using the programming platform (parametric features) and generative components
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 297-304
summary	The emergence of parametric generative design tools and prototyping manufacturing technology led to radical changes in architectural morphologies. This change increased the opportunity to develop innovative smart geometries. Integrating these algorithms in the parametric softwares led to variations in building design concepts increasing alternatives and decreasing the repetitive work previously needed in conventional CAD software. The chosen software in this research is Generative Components (GC). It is a software design tool for an associative and parametric design platform. It is tested for using Global Variables with associative functions during the concept creation and form GC comprises features. The results presented in this research may be considered an introduction to the smart geometry revolution. It deals with the generative design which applied in the design process from conceptual design phase, defining the problem, exploring design solutions, then how to develop the design phases. Office building is a building type which encourages new forms that needs computational processes to deal with repetitive functions and modular spaces and enclosed in a flexible creative structural skin. Generative design helps the office buildings to be arranged, analysed, and optimized using parameters in early stages in design process. By the end of the research, the use of the smart geometry in a high rise office building is defined and explained. The research is divided into three parts, first a summary of the basic theories of office buildings design and the sustainable requirements that affect it, and should be integrated. Secondly, the previous experiences in generating office buildings by Norman foster and Sergio Araya. At last, a case study is proposed to test and evaluate the use of the parametric generative methodology in designing an office building with specific emphasis on the function, environmental aspects and form generation using Generative Components (GC) Software.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ascaad2009_amal_al-ali
id	ascaad2009_amal_al-ali
authors	Al-Ali, Amal and P. Sharma
year	2009
title	Creativity and Collaboration in Architecture Education in the UAE
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 245-256
summary	A review of national government literature indicates that today’s knowledge-driven economy demands a workforce equipped with complex skills and attitudes. Examples of these skills and attitudes are general problems solving, meta-cognitive skills, critical thinking and lifelong learning. Reviews of the Architecture, Engineering and Construction industry indicates a gap between architecture practice and education. The Egan report states that there is a need for a change of style, culture and process within the construction industry and it identified five driving forces, the report also recognised that the achievement of these driving forces is linked to training and education. Education must not only teach the necessary technical skills and knowledge, but also the culture of teamwork, collaborative work and creativity. The construction boom in the United Arab Emirates combined with the country’s mission to highly educate and train its nationals to be able to tackle market challenges provoked the necessity of implementing the culture of creativity and collaboration in education system. On the other hand, use of technology in education has been proven to facilitate and enhance the learning process. This paper will highlight the importance of implementing the virtual design studio as a technlogical platform in architecture education in the UAE in a way that aims to promote the culture of creativity and collaboration through the use of technology.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	sigradi2009_890
id	sigradi2009_890
authors	Almeida, Fábio de
year	2009
title	Documentação e Comunicação Digital do Patrimônio Arquitetônico Moderno: Centro Técnico de Aeronáutica – CTA [Documentation and Communication Digital Architectural Heritage Classic: Aerospace Technical Center - CTA]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This paper intends to contribute for the analysis of the digital representation applied for documentation, communication and diffusion of architecture as cultural heritage, more specifically the production and communication of informations about buildings and sites of modern movement, arguing the possibilities and limits of this instrumental for the best understanding, recognition, evaluation and diffusion of the architecture on a historiographical perspective. As studies of cases, were selected buildings of an important technical center of aeronautic of Brazil, the CTA (Centro Técnico de Aeronáutica) in São José dos Campos, State of São Paulo.
keywords	surveying and reconstruction; Digital Heritage; Modern Movement
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2009_854
id	sigradi2009_854
authors	Antoniazzi, Asdrubal; Airton Cattani; Jaqueline Viel Caberlon Pedoni
year	2009
title	Procedimentos metodológicos para simulação computacional de ambientes históricos [Methodological procedures for computer simulation of historical surroundings]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This study aims to present a classification of methodological procedures for using computer programmes to simulate architectural historical heritage. Produced for a Master’s Degree dissertation in Architecture, the methodology was developed based on several analyses of applications, possibilities and restrictions, with the assistance of photogrammetric reconstruction and several computer-graphics programmes. The files generated enable production of animations recording the changes experienced by buildings at various historical periods. These procedures were applied to the simulation of several buildings around the Praça Dante Alighieri in the centre of Caxias do Sul, Rio Grande do Sul, demonstrating their appropriateness and effectiveness and also showing the potential of computer-simulation resources for the historical environment, both educationally and in appreciation of architectural heritage.
keywords	Three-dimensional geometric modelling; Computer simulation; Digital reconstruction; Historical environment
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2009_087
id	ecaade2009_087
authors	Asanowicz, Aleksander
year	2009
title	Evolution of Design Support Methods – from Formal Systems to Environment
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 817-824
doi	https://doi.org/10.52842/conf.ecaade.2009.817
wos	WOS:000334282200100
summary	In the paper the main stages of the evolution of aided design methods (which led to the formation of new spaces of creation) will be presented. The first way in which human tried make his work easier were direct introduction of scientific researches in practice. Comprehension and studying the structure of design process creates real conditions for increase of its efficiency. Thanks to methodological researches the systematic design methods were developed. The next steep was introducing the IT technologies into the design process. Firstly as a simple tool, and after as the participant of the creative process. Last years an idea of “direct designing” – the use of VR as an environment for the spatial forms creation was elaborated. The environment starts to play a role of an active mediator joining the real world, the men and the computer. In this environment the designer has access to the processes and sources of creative activity. The qualitatively new process of architectural designing arises.
keywords	Methodology, creativity, design environment
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia09_252
id	acadia09_252
authors	Baker, William; Beghini, Alessandro; Carrion, Juan; Tort, Cenk
year	2009
title	Scripting for a New Architecture: Studies in Structural Optimization
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 252-254
doi	https://doi.org/10.52842/conf.acadia.2009.252
summary	This paper describes how scripting has been successfully used by structural engineers at Skidmore, Owings & Merrill, LLP (SOM) to rediscover, apply, and develop several tools for structural optimization. Some of these methods are described in this paper for applications to high-rise buildings and long-span roof structures
series	ACADIA
type	Short paper
email
last changed	2022/06/07 07:54

_id	ascaad2009_mustapha_ben_hamouche
id	ascaad2009_mustapha_ben_hamouche
authors	Ben-Hamouche, Mustapha
year	2009
title	Gis in Architectural Education: Design as a place-making process
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 393-407
summary	Responsiveness to site conditions and environment is one of the axioms of architectural design. However, most students’ design is made in a non-geo-coordinated cyberspace through CAAD design and thus leading to “flying” proposals” that are not attached to the context. GIS teaches students in architecture to initially refer to real locations as the space in which they design is geo-coordinated and provides the wider context of the project. Along the design process, the project surroundings from macro scale; that is the globe, to the micro-scale that is reflected in the existing buildings, the road network and the topography are constantly present. At the end stage, the project is seen not as a free standing building but rather as an integral part in a real place on Earth. The 3-D urban visualization gives the possibility of evaluating the degree of success of place-making and the fitness of the project to its context. The aim of the paper is to present how a GIS course can support CAAD and improve the architectural design process as well as the quality of the design output towards a contextual architecture. The paper is based on the experience of the author who is architects and urban planner, in teaching design studios and Urban Planning based on GIS as an elective course to graduating students in architecture at the University of Bahrain. It presents an alternative method that is called Permanent Presence of the Real World PPRW.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadia09_226
id	acadia09_226
authors	Benton, Sarah
year	2009
title	reForming: Responding to Our Land in Crisis
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 226-233
doi	https://doi.org/10.52842/conf.acadia.2009.226
summary	An environmental crisis in Australia in early 2009 prompted the architectural design work considered in this paper. Bushfires ravaged the Victorian hinterland, destroying lives and families. The crises inspired me to explore the ACADIA 2009 conference theme, reForm(): how technologies transform the ways in which buildings and spaces perform, act and operate. This paper explores architectural design in distressed contexts and some design technologies used to formalize new housing development and respond to the environmental crisis.
keywords	Parametric design, environment, design logic, landscape, biomimicry
series	ACADIA
type	Normal paper
email
last changed	2022/06/07 07:54

For more results click below: