Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 593

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2009_amal_al-ali
id	ascaad2009_amal_al-ali
authors	Al-Ali, Amal and P. Sharma
year	2009
title	Creativity and Collaboration in Architecture Education in the UAE
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 245-256
summary	A review of national government literature indicates that today’s knowledge-driven economy demands a workforce equipped with complex skills and attitudes. Examples of these skills and attitudes are general problems solving, meta-cognitive skills, critical thinking and lifelong learning. Reviews of the Architecture, Engineering and Construction industry indicates a gap between architecture practice and education. The Egan report states that there is a need for a change of style, culture and process within the construction industry and it identified five driving forces, the report also recognised that the achievement of these driving forces is linked to training and education. Education must not only teach the necessary technical skills and knowledge, but also the culture of teamwork, collaborative work and creativity. The construction boom in the United Arab Emirates combined with the country’s mission to highly educate and train its nationals to be able to tackle market challenges provoked the necessity of implementing the culture of creativity and collaboration in education system. On the other hand, use of technology in education has been proven to facilitate and enhance the learning process. This paper will highlight the importance of implementing the virtual design studio as a technlogical platform in architecture education in the UAE in a way that aims to promote the culture of creativity and collaboration through the use of technology.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ijac20097107
id	ijac20097107
authors	Hadjimitsis, D.G.; Themistocleous, K.; Agapiou, A.; Clayton, C.R.I.
year	2009
title	Monitoring Archaeological Site Landscapes in Cyprus using Multi-temporal Atmospheric Corrected Image Data
source	International Journal of Architectural Computing vol. 7 - no. 1, 121-138
summary	This paper aims to examine the use of satellite remote sensing for monitoring archaeological and more generally cultural heritage sites. For this purpose, multi-temporal data from Landsat 5 TM, Landsat 7 ETM+ and Quickbird images were applied. The paper also discusses the importance of atmospheric correction at the pre-processing step in order to determine true surface reflectance values by removing these effects from satellite images. Atmospheric correction is arguably the most important part of the pre-processing of satellite remotely sensed data and any omission produces erroneous results. The effects of the atmosphere are more severe where dark targets are shown in the satellite image. In the management of cultural heritage sites, since temporal satellite images are required for monitoring purposes, the effect of the atmosphere must be considered. In-situ spectro-radiometric measurements using the GER1500 field spectro-radiometer have been used to assess the reflectance values found after applying the darkest pixel atmospheric correction to the image data. The study area consist the Amathus archaeological site in Limassol and the Nea Paphos archaeological site area located in Paphos district area in Cyprus. Vegetation Index (NDVI) change detection algorithm has been applied to a series of thirteen Landsat TM/ETM+ images of Amathus archaeological site in Limassol. Classification and extraction algorithms have been applied to Landsat TM and Quickbird high resolution images of Nea Paphos archaeological site area.
series	journal
last changed	2009/06/23 08:07

_id	ascaad2009_a_al_attili
id	ascaad2009_a_al_attili
authors	Al-Attili, A. and M. Androulaki
year	2009
title	Architectural Abstraction and Representation: The embodied familiarity of digital space
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 305-321
summary	This paper argues that familiarity is the tool that enables the understanding of space abstraction and representation. Familiarity in this context is independent from embodied interaction, and is crudely based on the connection between the various similar images of space; in this particular case, virtual space. Our investigation into the nature of human interaction with space, its abstraction and its representation is based on the critical contrast between the outcomes of interaction with two virtual versions of a physical reality; the first version is a non-linear interactive graphical abstraction of the space where no assertions or indicators are given as to whether or not there is a relationship between the abstraction and its physical reality, whereas the second is a none-linear interactive 3D virtual environment clearly representing the physical space in question. The paper utilises qualitative methods of investigation in order to gain an insight into human embodied experience in space, its abstraction and representation.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ijac20097306
id	ijac20097306
authors	Balakrishnan, Bimal; Kalisperis, Loukas N.
year	2009
title	Design Visualization:A Media Effects Approach
source	International Journal of Architectural Computing vol. 7 - no. 3, 415-427
summary	This paper proposes an integrative approach in the evaluative phase of the design process, incorporating concepts, methodologies and measurement strategies that are well established in media psychology. The paper suggests a variable-centered approach for conceptualizing visualization technologies and to evaluate their potential to simulate architectural experience. Psychophysiological measures are introduced to capture the affective component of the architectural experience facilitated by visualization tools such as virtual reality. These are important in order to empirically evaluate the experiential aspects of an architectural space through visualization. Ideas are illustrated with examples drawn from prior and ongoing research collaboration between an architectural visualization lab and a media effects research lab.
series	journal
last changed	2009/10/20 08:02

_id	ijac20097106
id	ijac20097106
authors	Brown, Andre; Saeed, Ghousia; Knight, Michael
year	2009
title	Finding Your Way Around Heritage Sites: the Delivery of Digital Information to Mobile Devices
source	International Journal of Architectural Computing vol. 7 - no. 1, 105-120
summary	An information enriched 3D digital city model connected wirelessly with the real-time user interaction has the potential to deliver an effective piece in the pervasive computing jigsaw. Real-time location awareness can contribute to the effective delivery of 3D digital city models and associated information to small mobile devices. Location awareness is also one of the vital elements of ubiquitous computing systems; together the mobile hardware and its interactive contents can be thought of as 'everyware'. This paper describes the work - undertaken with different technological systems that have potential for pedestrian location sensing connecting the pedestrian user with real and virtual environments simultaneously. In particular we look at how users can be correctly located and efficiently informed about buildings and artefacts that are part of the spectrum of built forms that together are referred to as Architectural Heritage sites.
series	journal
last changed	2009/06/23 08:07

_id	sigradi2009_964
id	sigradi2009_964
authors	Castriota, Leonardo Barci; Rezende
year	2009
title	Fotografia digital e imagens multi-perspectivas no estudo de sítios históricos [Digital photography and multi-perspective image in the study of historical sities]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	The creation of panoramic images for depicting urban landscape is a technique that has its origins in Antiquity. These images, which are known to represent large urban areas from multiple views, can be considered true works of art. Recently there has been a growing interest by some researchers, especially in the area of computer graphics, in the production of multi-perspective images for representing historic sites. However, the focus of these studies has been especially the computational aspects of this process, and there are few studies that address the impact and possibilities of these methodologies in historic preservation and urban planning. Realizing this shortcoming and considering the demand for a perspective more connected to cultural heritage, our proposal is to associate the excellent visual results of the multi-perspective images to the rich possibilities of computer simulation that can provide digital photography. The fact is that in recent years we have experienced technological innovations in the field of computer simulation that far exceeded our expectations. While most surveys of buildings are still based on the use of tape measure, pencil, paper and camera, the computer has become increasingly the main interface between the user and the information and is now the preferred instrument for the production and viewing of images, including the creation of virtual environments. Thus, this work seeks to explore the great potential which seems to exist in the combination of digital photography and the technique of multi-perspective image representation, which may provide new approaches and perspectives for the field of historic preservation. For that, we present a rapid and low cost methodology, developed in recent years, which generates orthophotos and metric multi-perspective images, useful for the analysis of built heritage and historic sites. In addition to that, we will also discuss further possible byproducts of this methodology, among which we could highlight the creation of three-dimensional models, and the analysis of building pathologies in combination with thermal photography. As a case study, we will present a representation of the Rua dos Caetés, a listed historic district in Belo Horizonte (MG), Brazil.
keywords	Photogametry; Digital Photography; Heritage; Conservation
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	ijac20097305
id	ijac20097305
authors	Crotch, Joanna; Mantho, Robert; Horner, Martyn
year	2009
title	Space Making Between the Virtual and the Physical
source	International Journal of Architectural Computing vol. 7 - no. 3, 403-414
summary	Digital technologies and processes have been used to generate architectural form for over two decades; recent advances in digital technologies have allowed virtual digital environments to be constructed from physical movement. But can a bridge that connects the physical and virtual realms be developed? Can this, currently arbitrary form making be grounded in human activity and subsequently be integrated into real time, space and place? This paper describes the preliminary explorations of research which attempts to address these questions.
series	journal
last changed	2009/10/20 08:02

_id	cf2009_585
id	cf2009_585
authors	E. Swarts, Matthew; A. Sheward, Hugo
year	2009
title	Using multi-level virtual environments as a medium for conducting design review through a shared IFC dataset
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 585- 597
summary	For a long time the Architecture-Engineering-Construction (AEC) community has had difficulty in communicating the content of their work, not only the various specialties involved, but also to their clients. Studies (Doorst and Cross 2001; Bakhtin 1994) suggest the importance of multi-role collaborative environments in supporting design processes. We are developing a Multi Level Design Review Tool for the AEC industry which allows multiple actors to congregate and interact as agents around a central Building Model. It merges real-time virtual 3D visualization technologies with Industry Foundation Classes (IFC) to support both high levels of semantic content and seamless interoperability.
keywords	Design review, virtual environment, interoperability
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	ijac20097104
id	ijac20097104
authors	Forte, Maurizio; Pietroni, Eva
year	2009
title	3D Collaborative Environments in Archaeology: Experiencing the Reconstruction of the Past
source	International Journal of Architectural Computing vol. 7 - no. 1, 57-76
summary	This paper presents the outcome of the research project: "Integrated Technologies of Robotics and Virtual Environments in Archaeology", financed by the Italian Ministry of the University and Scientific Research, FIRB (Funds for the Investments of Basic Research). The aim of the project is to experiment and realize a multi-user domain on the web aimed to a multidisciplinary scientific community: archaeologists, historians, experts in human and social sciences, communication experts. The capacity to load, share and interact with data in the same spatial virtual environment can increase the level of learning and scientific communication. The project is the result of the collaboration between CNR-ITABC of Rome, the University of California, Merced, the Department of Archaeology of the University of Pisa and Scuola S. Anna of Pisa. It focuses on three archaeological sites: the Teban tomb 14 in the necropolis of Gurna, Fayum Medinet Madi, both in Egypt, and Khor Rori, in Oman. The collaborative environment is constructed through a virtual reality system. This allows to create a virtual space where it is possible to share 3D information on the project and to host additional behaviors of the scientific community.
series	journal
last changed	2009/06/23 08:07

_id	ijac20097202
id	ijac20097202
authors	Fukuda, Tomohiro; Kaga, Atsuko; Izumi, Hideaki; Terashima, Takanori
year	2009
title	Citizen Participatory Design Method using VR and A Blog as a Media in the Process
source	International Journal of Architectural Computing vol. 7 - no. 2, 217-233
summary	This research concerned the establishment of a citizen participatory design method using VR (Virtual Reality) and CGM (Consumer Generated Media) as design media or a communication media in the design process. For this, problems in the citizen participatory design are addressed, and the continuous study method using VR and a blog is shown. Then, evaluation is conducted by considering an actual design project as a case study. Furthermore, VR functions needed through the case study are developed. Using this method, a small patio on which parasols were permanently and lawfully set up on a road lot was completed.
series	journal
last changed	2009/08/11 08:39

_id	ecaade2009_005
id	ecaade2009_005
authors	Gül, Leman Figen
year	2009
title	Studying the Impact of Immersion on Design Cognition
doi	https://doi.org/10.52842/conf.ecaade.2009.615
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 615-622
summary	With the recent developments in information and communication technologies, designers have adapted digital tools and new ways of designing into their practice. In order to develop efficient systems for designing, the adaptation of new tools and techniques in design practice requires a better understanding of how designers employ the digital medium and what impact the digital medium have on designers’ cognition. The latter one is the subject of this paper. The paper presents the methodology and the initial results of a pilot to investigate the impact of immersion on design cognition. The initial result of the pilot study indicates that the designers were able to adapt to each design environment which affords different kinds of activities and requires different cognitive load.
wos	WOS:000334282200074
keywords	Design cognition, digital design environments, virtual worlds, protocol analysis, immersion
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ascaad2009_yoshihiro_kobayashi
id	ascaad2009_yoshihiro_kobayashi
authors	Kobayashi, Y.; C. J. Grasso; M. Mcdearmon and R. Baker
year	2009
title	Virtual Driving: VR city modeling and drive simulation in real time
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 335-347
summary	This paper introduces a VR city model developed for driving simulation. The project is a part of interdisciplinary multi-year academic research grant. First, the outline of the research is explained. The process of VR city modeling is then introduced. The modeling process of creating road and intersection networks and traffic flow is explained. The system integration with a PC, modeling and VR software, and a Drive Simulator is illustrated. A case study of driving through the city with different traffic amounts using the simulator is analyzed. Computational tools to extract driving behavior data and future endeavors are discussed.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	sigradi2009_930
id	sigradi2009_930
authors	Polonini, Flávia Bicas da Silva
year	2009
title	Fabricação Digital para a Arquitetura e Construção no Brasil, utilizando o método Contouring [Digital Fabrication for Brazil’s Architecture and construction, the use of Contouring method]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This paper presents a digital manufacturing strategy for architecture and construction, which allows the production of high complexity objects. This piece demonstrates the use of CAD / CAM technologies in the manufacturing process trough Contouring method, which translate the general geometry of the building in two-dimensional components and is applied by architects like Bernard Franken. The paper show partial results from the undergraduate dissertation, Virtual Ways, by the author, through its application to a model. As a result, the article analyzes the differences between the use of digital and traditional manufacturing technology, emphasizing its use in Brazil
keywords	CAD/CAM; Digital Fabrication; Contouring; complex geometry; construction
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	ijac20097110
id	ijac20097110
authors	Ruhland, K.; Sedlmair, M.; Bioletti, S.; O'Sullivan, C.
year	2009
title	LibViz: Data Visualisation of the Old Library
source	International Journal of Architectural Computing vol. 7 - no. 1, 177-192
summary	The Old Library of Trinity College Dublin, built in 1732, is an internationally renowned research library. In recent decades it has also become a major tourist attraction in Dublin, with the display of the Book of Kells within the Old Library now drawing over half a million visitors per year. The Preservation and Conservation Department of the Library has raised concerns about the impact of the environment on the collection. The location of the building in the city centre, large visitor numbers, and the conditions within the building are putting the collection at risk. In developing a strategic plan to find solutions to these problems, the department has been assessing and documenting the current situation. This paper introduces ongoing work on a system to visualise the collected data, which includes: dust levels and dispersion, internal and external temperature and relative humidity levels, and visitor numbers in the Old Library. We are developing a user interface for which the data, originally stored in various file formats, is consolidated in a database which can be explored using a 3D virtual reconstruction of the Old Library. With this novel technique, it is also possible to compare and assess the relationships between the various datasets in context.
series	journal
last changed	2009/06/23 08:07

_id	ecaade2009_104
id	ecaade2009_104
authors	Schneider, Sven; Petzold, Frank
year	2009
title	A Virtual Design Platform: Bridging Barriers When Designing with Computers
doi	https://doi.org/10.52842/conf.ecaade.2009.205
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 205-212
summary	The paper summarizes the results of a diploma thesis. Taking the potential of computers to be an ultimate design-medium as its premise, the thesis examines how to enhance the way we use digital design tools. It identifies central characteristics of the design process that need to be considered in a digital design environment. Based on a conception of design as a cyclic process involving appropriate design tools, the paper singles out usability, in the sense of ease of use of such tools, as a key criteria for overcoming problems associated with designing on and with the computer. Drawing on these considerations a prototype has been developed which attempts to bridge barriers between the use of different design tools using an existing software framework.
wos	WOS:000334282200025
keywords	Design theory, design process, interface-design, freehand sketching, collaboration
series	eCAADe
email
last changed	2022/06/07 07:57

_id	ijac20097206
id	ijac20097206
authors	Stahre, Beata; Billger, Monica; Anter, Karin Fridell
year	2009
title	To Colour the Virtual World - Difficulties in Visualizing Spatial Colour Appearance in Virtual Environments
source	International Journal of Architectural Computing vol. 7 - no. 2, 289-308
summary	This paper discusses the problems of visualizing colour appearance in an interactive virtual environment (VE) from the viewpoint of practice based architectural research. The discussion is based upon the research information project Virtual Colour Laboratory (VCL), the aim of which is to visually present and demonstrate existing research results on spatial colour phenomena for educational purposes, in the shape of a software application. During the work on this project, various problems connected to the visualization of colour appearance have emerged which are discussed in relation to current research on spatial experience and visual appearance in VEs. The aim of the paper is to focus on the importance of colour appearance in digital modelling as well as to highlight the problems of visualizing colour appearance interactively. The term colour appearance is used here as a general concept for the perceived colour of a surface or object.
series	journal
last changed	2009/08/11 08:39

_id	cf2009_533
id	cf2009_533
authors	Tahrani, Souha; Moreau, Guillaume
year	2009
title	La perception de l’espace urbain par la réalité virtuelle; Perception of urban space through virtual reality
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 533- 546
summary	Urban environment is a “sensible” space; it can manifest itself to our senses through the process of perception. The comprehension of the relation between man and his environment requires a study of spatial perception and its modes of interpretation. This paper proposes to study the perception by using the Virtual Reality (VR) technologies as a tool of qualitative analysis. The study presents an exploratory analysis of visual perception in a real urban path and its virtual modeling. It shows the potentials of virtual environments in the qualitative assessment of urban spaces.
keywords	Perception, virtual reality, mental image, urban space
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	ijac20097109
id	ijac20097109
authors	Tost, Laia Pujol; Economou, Maria
year	2009
title	Worth a Thousand Words? The Usefulness of Immersive Virtual Reality for Learning in Cultural Heritage Settings
source	International Journal of Architectural Computing vol. 7 - no. 1, 157-176
summary	The goal of this paper is to investigate whether immersive virtual reality is suitable for learning about archaeology and the past in cultural heritage settings. To that end it presents the conclusions related to learning from the visitors' survey undertaken in 2007 by the Museology Laboratory of the University of the Aegean at the Hellenic Cosmos (the exhibition centre of the Foundation of the Hellenic World) in Athens, and contrasts these with other similar studies. This project was aimed at comparing the learning outcomes, perception and use by audiences of two different virtual reality systems and a related exhibition. It included qualitative and quantitative analysis of the data gathered through in situ observations, interviews with museum educators and face-to-face questionnaires with visitors. The results confirmed that, as previous studies have shown, virtual reality systems allow a different kind of learning, but also questioned the common believe about their advantage for children in comparison with other interpretation methods.
series	journal
last changed	2009/06/23 08:07

_id	ijac20097204
id	ijac20097204
authors	Vecchia, Luisa Dalla; Silva, Adriane da; Pereira, Alice
year	2009
title	Teaching/learning Architectural Design based on a Virtual Learning Environment
source	International Journal of Architectural Computing vol. 7 - no. 2, 255-266
summary	This paper describes an experiment in which a virtual learning environment was used in the context of an architectural design course. The objective was to evaluate the capability of the learning environment used to support the interactions needed, between teacher-student and between students, for the establishment of a process of discussion and development of architectural design. Some limitations were identified and also positive points, such as the possibility to register the whole design process. These registers allow the design teacher to evaluate his own teaching process and improve it and also the visualization of what kind of intervention the teacher makes and when, making it possible to identify the kind of design processes established by the student and the kind of structure of knowledge which is implicit in a process of teaching/learning architectural design according to the level of development of the design.
series	journal
last changed	2009/08/11 08:39

_id	ijac20097105
id	ijac20097105
authors	Walczak, Krzysztof
year	2009
title	Modelling Behaviour of Configurable VR Applications
source	International Journal of Architectural Computing vol. 7 - no. 1, 77-103
summary	Creation of complex behaviour-rich and meaningful content is one of the main difficulties that currently limit wide use of virtual reality technologies in everyday applications. To enable widespread use of VR applications new methods of content creation must be developed. In this paper, we propose a novel approach to designing behaviour-rich virtual reality applications, called Flex-VR. The approach enables building configurable VR applications, in which content can be easily created and modified by domain experts or even common users without knowledge about VR design and computer programming. The VR content is configured from reusable programmable content elements, called VR-Beans. Appearance and behaviour of the VR-Beans are controlled by scripts programmed in a novel high-level language, called VR-BML (Behaviour Modelling Language). The language enables specification of generic behaviours of objects that can be dynamically composed into virtual scenes. The paper introduces the Flex-VR component and content models, describes the VR-BML language and provides an example of a Flex-VR application in the cultural heritage domain.
series	journal
last changed	2009/06/23 08:07

For more results click below: