Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 592

Reformat results as: short short into frame detailed detailed into frame

_id	acadia09_159
id	acadia09_159
authors	Peronto, John; Maschke, Ken; Sinn, Robert; Xu, Fei; Raines, Ben; Rehill, Dennis
year	2009
title	Data Flow and Communication in the Design of Complex Architectural Forms
doi	https://doi.org/10.52842/conf.acadia.2009.159
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 159-164
summary	Recent advances in architectural and engineering technology have opened the door for complex architectural expression in today’s built environment. When pushing the envelope on geometric complexity, architects and engineers must begin a dialogue early on in the design process and communicate effectively throughout. Using digital models for communication, visualization, and analysis creates additional digital information that may need to be shared. Middleware provides interoperability between different software packages and facilitates the exchange of information. However, this does not exempt the partners from maintaining traditional lines of open communication. This paper will discuss the importance of open communication and demonstrate a strategy for sharing digital information. The case studies that will be presented are taken from design projects whose geometric complexity required close partnership between design team members. Effective communication will first be discussed in the context of three sculptural concept designs. Second, the interoperability of digital models will be discussed through a case study of a complex, faceted super-tall high-rise tower.
keywords	Complex design, construction, collaboration, scripting, analysis
series	ACADIA
type	Normal paper
email
last changed	2022/06/07 08:00

_id	sigradi2015_8.334
id	sigradi2015_8.334
authors	Silva, Lilian Maciel Furtado; Silva, Neander Furtado
year	2015
title	Digital Design of High-Rise Buildings with Tessellation and Mapping
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 414-419.
summary	A new high-rise building, when inserted in an existing urban environment, cannot have all the floor plans identical since the visual and environmental constraints change from floor to floor due to the interference of neighboring buildings, sun light, prevailing wind and noise. So how can we design a building that takes into consideration all this variables? How can digital design tools help? (DELPINO, 2014). We believe that a building like that can be designed constructing facade maps which allow a floor by floor analysis considering visual, wind, noise and sun light constraints. We believe that facade maps analysis and their superposition provide clues of how each floor plan can be built to provide comfort and to take most advantage of the view. (DELPINO, 2014). We believe that variation techniques such as tessellation and morphing can provide the formal bases for such design. We believe that digital design tools are vital both for analysis as well as for designing this type of building. (IWAMOTO, 2009, p. 35-59; MOUSSAVI, 2009, p. 42-216).
keywords	High-rise Buildings, Digital Design Method, Tessellation, Mapping
series	SIGRADI
email
last changed	2016/03/10 10:00

_id	ascaad2009_mai_abdelsalam
id	ascaad2009_mai_abdelsalam
authors	Abdelsalam, Mai
year	2009
title	The Use of the Smart Geometry through Various Design Processes: Using the programming platform (parametric features) and generative components
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 297-304
summary	The emergence of parametric generative design tools and prototyping manufacturing technology led to radical changes in architectural morphologies. This change increased the opportunity to develop innovative smart geometries. Integrating these algorithms in the parametric softwares led to variations in building design concepts increasing alternatives and decreasing the repetitive work previously needed in conventional CAD software. The chosen software in this research is Generative Components (GC). It is a software design tool for an associative and parametric design platform. It is tested for using Global Variables with associative functions during the concept creation and form GC comprises features. The results presented in this research may be considered an introduction to the smart geometry revolution. It deals with the generative design which applied in the design process from conceptual design phase, defining the problem, exploring design solutions, then how to develop the design phases. Office building is a building type which encourages new forms that needs computational processes to deal with repetitive functions and modular spaces and enclosed in a flexible creative structural skin. Generative design helps the office buildings to be arranged, analysed, and optimized using parameters in early stages in design process. By the end of the research, the use of the smart geometry in a high rise office building is defined and explained. The research is divided into three parts, first a summary of the basic theories of office buildings design and the sustainable requirements that affect it, and should be integrated. Secondly, the previous experiences in generating office buildings by Norman foster and Sergio Araya. At last, a case study is proposed to test and evaluate the use of the parametric generative methodology in designing an office building with specific emphasis on the function, environmental aspects and form generation using Generative Components (GC) Software.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	acadia09_252
id	acadia09_252
authors	Baker, William; Beghini, Alessandro; Carrion, Juan; Tort, Cenk
year	2009
title	Scripting for a New Architecture: Studies in Structural Optimization
doi	https://doi.org/10.52842/conf.acadia.2009.252
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 252-254
summary	This paper describes how scripting has been successfully used by structural engineers at Skidmore, Owings & Merrill, LLP (SOM) to rediscover, apply, and develop several tools for structural optimization. Some of these methods are described in this paper for applications to high-rise buildings and long-span roof structures
series	ACADIA
type	Short paper
email
last changed	2022/06/07 07:54

_id	ascaad2009_samir_foura
id	ascaad2009_samir_foura
authors	Foura, Samir and Samira Debache
year	2009
title	Thermal Simulation In Residential Building Within Computer Aided Architectural Design: Integrated model
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 235-243
summary	Nowadays, the architectural profession is seeking a better energy saving in the design of buildings. The fear of energy shortage in the very near future, together with the rapid rise in energy prices, put pressure on researchers on this field to develop buildings with more efficient heating systems and energy systems. This work is concerned mainly with the development of a software program analyzing comfort in buildings integrated in CAD architectural systems. The problem of presenting the computer with information concerning the building itself has been overcome through integration of thermal analysis with the building capabilities of CAD system. Mainly, such experience concerns the rules for calculating heat loss and heat gain of buildings in Algeria, The program has been developed in order to demonstrate the importance of the innovation of the computer aided-architectural-design field (CAAD) in the technology of buildings such as the three dimensional modeling offering environmental thermal analysis. CAAD is an integrated architectural design system which can be used to carry out many tasks such as working drawings, perspectives and thermal studies, etc., all from the same data. Results are obtained in tabular form or in graphical output on the visual display. The principle of this program is that all input data should be readily available to the designer at the early stages of the design before the user starts to run the integrated model. Particular attention is given to the analysis of thermal aspects including solar radiation gains. Average monthly energy requirement predictions have been estimated depending on the building design aspect. So, this integrated model (CAAD and simulation comfort) is supposed to help architects to decide on the best options for improving the design of buildings. Some of these options may be included at the early design stages analysis. Indications may also be given on how to improve the design. The model stored on CAAD system provides a valuable data base for all sort analytical programs to be integrated into the system. The amount of time and expertise required to use complex analytical methods in architectural practice can be successfully overcome by integration with CAAD system.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ecaade2009_keynote2
id	ecaade2009_keynote2
authors	Whitehead, Hugh
year	2009
title	Social Experiments in Design Technology
doi	https://doi.org/10.52842/conf.ecaade.2009.x.f4d
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference] Istanbul (Turkey) 16-19 September 2009
summary	The delivery of a successful project demands high levels of collaboration across an expanded design team, which now includes consultants, fabricators and contractors as well as architects and engineers. The pace of development in design technology has been very rapid during the last few years and there are now many software products which offer high levels of sophistication. Most provide associative and parametric modelling strategies, which can be further enhanced and extended by the use of scripting languages. Designers are becoming tool-builders while fabricators are becoming digital craftsmen. With the advent of fast efficient drawing extraction the industry is at last making determined steps towards a model-driven process. However there is no integrated platform which supports the free exchange of ideas, combined with the evaluation of performance, experimentation with production techniques and the evolution of project-specific workflows. In education the design schools have been quick to recognise the potential of the new design technology. This has led to a rapid expansion in course curricula that now offer many new specialisations, most of which also need to be under-pinned by a good grounding in descriptive geometry, mathematics and physics. The architect as a generalist, who coordinates the work of specialists, is being challenged by an increasing breadth of technical studies that require more than just a superficial depth of understanding. In practice the gulf is widening even more rapidly. New graduates, who often have spectacular expertise in modelling and fluency in scripting languages, do not yet have the design and construction experience necessary to direct their efforts to best effect. On the other hand people running project teams do not have the technical background to understand the potential of the skills and resources that are available. Today there is no longer the continuity that used to derive from apprenticeship. As we experiment we find that tools based on new ideas and techniques can radically change workflow – but fear of the unknown can provoke resistance. So the problems we face in harnessing the new technology are as much social and cultural as they are technical. The presentation will focus on developing attitudes towards tool-building with the aim of integrating design, analysis and production. This is part of a continual and quite gradual process, which requires the ability to play interpretive roles that help to bring about cultural change. Examples will be shown from the work of the Specialist Modelling Group at Foster+Partners who now have tenyears experience in deploying design technology in an environment where research is intensely project driven.
series	eCAADe
type	keynote paper
last changed	2022/06/07 07:50

_id	acadia09_30
id	acadia09_30
authors	Aish, Robert
year	2009
title	Tools of Expression: Notation and Interaction for Design Computation
doi	https://doi.org/10.52842/conf.acadia.2009.030
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 30-31
summary	Design considers function, fabrication, and aesthetics collectively. Computation is beginning to affect the competitive dynamics of design. Using algorithms, designers are exploring forms that are essentially “undrawable,” even with advanced modeling and direct manipulation techniques. Determining the appropriate functional characteristics may require the application of increasingly complex structural- and environmental-performance analysis techniques. To realize physically a design may require further geometric analysis and rationalization, and the use of complex computer-controlled fabrication techniques.
keywords	Design, Computation, Form Finding, Design logic
series	ACADIA
type	Keynote paper
email
last changed	2022/06/07 07:54

_id	ascaad2014_023
id	ascaad2014_023
authors	Al-Maiyah, Sura and Hisham Elkadi
year	2014
title	Assessing the Use of Advanced Daylight Simulation Modelling Tools in Enhancing the Student Learning Experience
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 303-313
summary	In architecture schools, where the ‘studio culture’ lies at the heart of students’ learning, taught courses, particularly technology ones, are often seen as secondary or supplementary units. Successful delivery of such courses, where students can act effectively, be motivated and engaged, is a rather demanding task requiring careful planning and the use of various teaching styles. A recent challenge that faces architecture education today, and subsequently influences the way technology courses are being designed, is the growing trend in practice towards environmentally responsive design and the need for graduates with new skills in sustainable construction and urban ecology (HEFCE’s consultation document, 2005). This article presents the role of innovative simulation modelling tools in the enhancement of the student learning experience and professional development. Reference is made to a teaching practice that has recently been applied at Portsmouth School of Architecture in the United Kingdom and piloted at Deakin University in Australia. The work focuses on the structure and delivery of one of the two main technology units in the second year architecture programme that underwent two main phases of revision during the academic years 2009/10 and 2010/11. The article examines the inclusion of advanced daylight simulation modelling tools in the unit programme, and measures the effectiveness of enhancing its delivery as a key component of the curriculum on the student learning experience. A main objective of the work was to explain whether or not the introduction of a simulation modelling component, and the later improvement of its integration with the course programme and assessment, has contributed to a better learning experience and level of engagement. Student feedback and the grade distribution pattern over the last three academic years were collected and analyzed. The analysis of student feedback on the revised modelling component showed a positive influence on the learning experience and level of satisfaction and engagement. An improvement in student performance was also recorded over the last two academic years and following the implementation of new assessment design.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	caadria2009_021
id	caadria2009_021
authors	Ambrose, Michael A.
year	2009
title	BIM and Comprehensive Design Studio Education
doi	https://doi.org/10.52842/conf.caadria.2009.757
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 757-760
summary	Building Information Modeling (BIM) has the potential to fundamentally alter the way composition, scale and abstraction are addressed in today’s comprehensive design studio by displacing the primacy of abstract conventions of representation with a methodology based on systems thinking and virtual simulation. BIM viewed as provocateur of design education provides great potential for the critical analysis of how architectural design is taught. The design studio project reflects new ways of teaching and addressing BIM methods and processes, and critically evaluating their effects and possibilities on architectural production.
keywords	Education; design theory; design studies; animation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ijac20097408
id	ijac20097408
authors	Biloria, Nimish; Valentina Sumini
year	2009
title	Performative Building Skin Systems: A Morphogenomic Approach Towards Developing Real-Time Adaptive Building Skin Systems
source	International Journal of Architectural Computing vol. 7 - no. 4, 643-676
summary	Morphogenomics, a relatively new research area, involves understanding the role played by information regulation in the emergence of diverse natural and artificially generated morphologies. Performative building skin systems as a bottom-up parametric formation of context aware interdependent, ubiquitously communicating components leading to the development of continually performative systems is one of the multi-scalar derivations of the aforementioned Morphogenomic understanding. The agenda of adaptations for these building skins specifically corresponds to three domains of adaptation: structural, behavioral and physiological adaptations resulting in kinetic adaptability, energy generation, conservation, transport and usage principles as well as material property based changes per component. The developed skins adapt in real time via operating upon ubiquitous communication and data-regulation protocols for sensing and processing contextual information. Computational processes and information technology based tools and techniques such as parametric design, real-time simulation using game design software, environmental information mapping, sensing and actuating systems coupled with inbuilt control systems as well as manufacturing physical models in collaboration with praxis form a vital part of these skin systems. These experiments and analysis based on developing intrinsic inter-dependencies between contextual data, structure and material logistics thus lay the foundation for a new era of continually performing, self powering, real-time adaptive intelligent building skin systems.
series	journal
last changed	2010/09/06 08:02

_id	cf2009_119
id	cf2009_119
authors	Boeykens, Stefan; Neuckermans, Herman
year	2009
title	Architectural design analysis, historical reconstruction and structured archival using 3D models: Techniques, methodology and long term preservation of digital models
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 119-132
summary	With the increased usage of 3D modeling, visualization, simulation and Building Information Modeling, architects produce 3D models, both for new designs and for historic reconstructions. However, these models are seldom shared to transfer structured information about the project. Even if they are exchanged, they are often not usable outside of their original design application. Additionally, digital archives with architectural content can not easily provide structured information about these 3D models, limiting their usefulness. This article discusses an approach to provide better structured models, using a combination of a sound methodology, the application of open file formats and additional metadata creation.
keywords	CAAD, design analysis, reconstruction, archival, preservation
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2009_964
id	sigradi2009_964
authors	Castriota, Leonardo Barci; Rezende
year	2009
title	Fotografia digital e imagens multi-perspectivas no estudo de sítios históricos [Digital photography and multi-perspective image in the study of historical sities]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	The creation of panoramic images for depicting urban landscape is a technique that has its origins in Antiquity. These images, which are known to represent large urban areas from multiple views, can be considered true works of art. Recently there has been a growing interest by some researchers, especially in the area of computer graphics, in the production of multi-perspective images for representing historic sites. However, the focus of these studies has been especially the computational aspects of this process, and there are few studies that address the impact and possibilities of these methodologies in historic preservation and urban planning. Realizing this shortcoming and considering the demand for a perspective more connected to cultural heritage, our proposal is to associate the excellent visual results of the multi-perspective images to the rich possibilities of computer simulation that can provide digital photography. The fact is that in recent years we have experienced technological innovations in the field of computer simulation that far exceeded our expectations. While most surveys of buildings are still based on the use of tape measure, pencil, paper and camera, the computer has become increasingly the main interface between the user and the information and is now the preferred instrument for the production and viewing of images, including the creation of virtual environments. Thus, this work seeks to explore the great potential which seems to exist in the combination of digital photography and the technique of multi-perspective image representation, which may provide new approaches and perspectives for the field of historic preservation. For that, we present a rapid and low cost methodology, developed in recent years, which generates orthophotos and metric multi-perspective images, useful for the analysis of built heritage and historic sites. In addition to that, we will also discuss further possible byproducts of this methodology, among which we could highlight the creation of three-dimensional models, and the analysis of building pathologies in combination with thermal photography. As a case study, we will present a representation of the Rua dos Caetés, a listed historic district in Belo Horizonte (MG), Brazil.
keywords	Photogametry; Digital Photography; Heritage; Conservation
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	cf2009_458
id	cf2009_458
authors	Dillenburger, Benjamin; Braach, Markus and Hovestadt, Ludger
year	2009
title	Building design as individual compromise between qualities and costs: A general approach for automated building generation under permanent cost and quality control
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 458-471
summary	We introduce an evolutionary design approach for the automatic arrangement of a predefined space program on a given site. The design goal is to distribute floor spaces while ensuring the essential building performance and usage. The presented evolutionary strategy is applied to acquire optimal design solutions considering both environmental conditions and inner organization under diversified fitness functions. The evaluation process consists of the direct analysis of the spatial network and the physical factors in an adequate accuracy. The method provides a fast generation of qualified volumetric studies. The resulting buildings become a manifested compromise between qualities and cost.
keywords	Evolutionary strategy, multi-fitness criteria, dual graph representation, network analysis, building envelope
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	ecaade2022_367
id	ecaade2022_367
authors	Doumpioti, Christina and Huang, Jeffrey
year	2022
title	Field Condition - Environmental sensibility of spatial configurations with the use of machine intelligence
doi	https://doi.org/10.52842/conf.ecaade.2022.2.067
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 2, Ghent, 13-16 September 2022, pp. 67–74
summary	Within computational environmental design (CED), different Machine Learning (ML) models are gaining ground. They aim for time efficiency by automating simulation and speeding up environmental performance feedback. This study suggests an approach that enhances not the optimization but the generative aspect of environmentally driven ML processes in architectural design. We follow Stan Allen's (2009) idea of 'field conditions' as a bottom-up phenomenon according to which form and space emerge from local invisible and dynamic connections. By employing parametric modeling, environmental analysis data, and conditional Generative Adversarial Networks [cGAN] we introduce a generative approach in design that reverses the typical design process of going from formal interpretation to analysis and encourages the emergence of spatial configurations with embedded environmental intelligence. We call it Intensive-driven Environmental Design Computation [IEDC], and we employ it in a case study on a residential building typology encountered in the Mediterranean. The paper describes the process, emphasizing dataset preparation as the stage where the logic of field conditions is established. The proposed research differentiates from cGAN models that offer automatic environmental performance predictions to one that spatial predictions stem from dynamic fields.
keywords	Field Architecture, Environmental Design, Generative Design, Machine Learning, Residential Typologies
series	eCAADe
email
last changed	2024/04/22 07:10

_id	acadia09_105
id	acadia09_105
authors	Drozdowski, Ziggy; Gupta, Shawn
year	2009
title	Adaptive Fritting as Case Exploration for Adaptivity in Architecture
doi	https://doi.org/10.52842/conf.acadia.2009.105
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 105-109
summary	This paper explores the incentive, design process, and realization of an adaptable building system. Hoberman Associates’ installation at the Graduate School of Design at Harvard University, Adaptive Fritting, is used as a case study for the more general thesis of mechanism design in architecture. Traditionally seen as expensive and impractical, ‘movement’ in buildings can be accessible if done with high economy and simple elegance. The goal of this example is to illustrate the design process, challenges, constraints and parameters required to realize an adaptable architectural system.
keywords	Adaptable design, fabrication, prototyping, solar shading
series	ACADIA
type	Normal paper
email
last changed	2022/06/07 07:55

_id	acadia09_18
id	acadia09_18
authors	d’Estrée Sterk, Tristan
year	2009
title	Introduction: Thoughts for Gen X-Speculating about the Rise of Continuous Measurement in Architecture
doi	https://doi.org/10.52842/conf.acadia.2009.018
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 18-22
summary	We are here, in Chicago, not to talk about what we know, but what we do not know. We are here to share ideas and to speculate about what the world might look like if it were challenged, rethought, and rebuilt. We are here to uncover, piece by piece, a sense of our own ambitions for an architecture influenced by today but motivated by tomorrow. We are all speculators and dreamers. We find places for dreaming in our work, our models, our essays, our lectures, our research, and our teaching. Through these activities we speculate on the architecture of tomorrow. Sometimes these speculations hold great promise, while at other times they do not – certainly much of what we do can be improved, refined, qualified, quantified, and genuinely benefit from being computed. This could be horrifying; it could set the scene for an engineered architecture if we do not adapt.But architecture is changing and responding to very fresh and different ways of thinking. As a movement, young architects are questioning their inheritance and establishing new values, new methods, and new forms of practice. We might best think of these young architects as the Generation X of architecture – a generation who shapes discourse through technological, social, and environmental lenses. From its smallest technical process to its highest level of thought, this conference represents the spirit of this movement.
keywords	Introduction, Measurement, dynamic design
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	cf2009_585
id	cf2009_585
authors	E. Swarts, Matthew; A. Sheward, Hugo
year	2009
title	Using multi-level virtual environments as a medium for conducting design review through a shared IFC dataset
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 585- 597
summary	For a long time the Architecture-Engineering-Construction (AEC) community has had difficulty in communicating the content of their work, not only the various specialties involved, but also to their clients. Studies (Doorst and Cross 2001; Bakhtin 1994) suggest the importance of multi-role collaborative environments in supporting design processes. We are developing a Multi Level Design Review Tool for the AEC industry which allows multiple actors to congregate and interact as agents around a central Building Model. It merges real-time virtual 3D visualization technologies with Industry Foundation Classes (IFC) to support both high levels of semantic content and seamless interoperability.
keywords	Design review, virtual environment, interoperability
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	caadria2009_146
id	caadria2009_146
authors	Fagerström, Gustav
year	2009
title	Dynamic Relaxation of Tensegrity Structures
doi	https://doi.org/10.52842/conf.caadria.2009.553
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 553-562
summary	The structural hierarchy inherent to tensegrities enables a building skin that performs on multiple levels simultaneously. While having one function in the global building mechanics, its individual components can work as self-contained systems balancing tensile and compressive forces locally within them. The behavior of elements under load is linear and thus describable analytically. When these are aggregated in a tensegrity however, the performance of the assembly as a whole is non-linear. In order to investigate further these relationships a method of dynamic relaxation will be developed. This tool allows for simulation and load analysis of a complex tensegrous network, based on the relationships between force, stiffness and dimension formulated by Young and the computational means provided by a parametric/associative modeling environment. This research investigates the possible formfinding through computational means of a double-layer tensegrity grid.
keywords	Dynamic; relaxation; tensegrity; form finding
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaade2009_148
id	ecaade2009_148
authors	Gil, Jorge; Montenegro, Nuno C.; Beirão, José Nuno; Duarte, José Pinto
year	2009
title	On the Discovery of Urban Typologies: Data Mining the Multi-dimensional Character of Neighbourhoods
doi	https://doi.org/10.52842/conf.ecaade.2009.269
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 269-278
summary	In sustainable urban development the first stage of the urban design process should consist of a pre-design phase where the context of the site is analysed both qualitatively and quantitatively. In this paper we present a methodology for data mining an urban Geographic Information System (GIS) data set, consisting of three main phases: representation, analysis and description. The process reveals a series of block and street typologies at various levels of detail that highlight the different character of two neighbourhoods. This methodology is demanding in the preparation phase and requires a high level of GIS and statistics expertise in the analysis phase. However, it successfully addresses the complex multi-scale and multi-level nature of cities in a systematic way, providing a tool for systematic profiling of neighbourhoods, which is site and problem specific.
wos	WOS:000334282200033
keywords	Data mining, GIS, sustainable development, urban typologies, urban context
series	eCAADe
email
last changed	2022/06/07 07:51

For more results click below: