Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 563

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2009_samir_foura
id	ascaad2009_samir_foura
authors	Foura, Samir and Samira Debache
year	2009
title	Thermal Simulation In Residential Building Within Computer Aided Architectural Design: Integrated model
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 235-243
summary	Nowadays, the architectural profession is seeking a better energy saving in the design of buildings. The fear of energy shortage in the very near future, together with the rapid rise in energy prices, put pressure on researchers on this field to develop buildings with more efficient heating systems and energy systems. This work is concerned mainly with the development of a software program analyzing comfort in buildings integrated in CAD architectural systems. The problem of presenting the computer with information concerning the building itself has been overcome through integration of thermal analysis with the building capabilities of CAD system. Mainly, such experience concerns the rules for calculating heat loss and heat gain of buildings in Algeria, The program has been developed in order to demonstrate the importance of the innovation of the computer aided-architectural-design field (CAAD) in the technology of buildings such as the three dimensional modeling offering environmental thermal analysis. CAAD is an integrated architectural design system which can be used to carry out many tasks such as working drawings, perspectives and thermal studies, etc., all from the same data. Results are obtained in tabular form or in graphical output on the visual display. The principle of this program is that all input data should be readily available to the designer at the early stages of the design before the user starts to run the integrated model. Particular attention is given to the analysis of thermal aspects including solar radiation gains. Average monthly energy requirement predictions have been estimated depending on the building design aspect. So, this integrated model (CAAD and simulation comfort) is supposed to help architects to decide on the best options for improving the design of buildings. Some of these options may be included at the early design stages analysis. Indications may also be given on how to improve the design. The model stored on CAAD system provides a valuable data base for all sort analytical programs to be integrated into the system. The amount of time and expertise required to use complex analytical methods in architectural practice can be successfully overcome by integration with CAAD system.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ijac20097108
id	ijac20097108
authors	Izkara, J.L.; Basogain, X.; Borro, D.
year	2009
title	Wearable Personal Assistants for the Management of Historical Centers
source	International Journal of Architectural Computing vol. 7 - no. 1, 139-156
summary	One of the main tasks facing the manager of a historical centre is to avoid degradation while retaining the historical value. For this reason, any intervention which takes place on the environment, should be carefully managed. Only when performing a proper diagnosis of the environment and its reality is possible to follow a high quality intervention. The integration of new information technologies has been crucial to the improvement of these processes providing new tools. Within the project called RASMAP, we have designed and implemented a mobile augmented reality platform based on a service oriented architecture. This project introduces the concept of Wearable Personal Assistant (WPA). WPA in the RASMAP platform represents an innovative wearable tool, which provides support to professionals in their daily activities (mechanical engineer, safety responsible person, diagnosis expert, etc.). This tool is based on augmented reality technologies, mobile devices and communication infrastructures. The development of the platform for the WPAs implies addressing several technological challenges: a) to overcome the limitations inherent in the mobile devices: speed, capacity of memory, capacity of storage, graphical features and others, b) to obtain tracking systems that they do not need to alter or to adapt the environment, c) to optimize for the transmission and reproduction of multimedia contents through wireless networks on mobile devices. In this article, we describe the RASMAP platform, as a basis for the development of WPA and the extension of its use for the management of historical centres. The quality and usefulness of the scientific-technological results provided by the WPA have been validated developing a demonstrator for the diagnosis of the conservation status of the historical centre of a small town in the Basque Country. The advantages to be gained by using WPA in the proposed scenario are among others: more efficient processes, improved communication between users, and local and distributed multimedia content records.
series	journal
last changed	2009/06/23 08:07

_id	acadia09_98
id	acadia09_98
authors	Bennett, Ed
year	2009
title	ArtBus: A Minimal Bus and Protocol for Distributed Interfacing in Art and Design
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 98-104
doi	https://doi.org/10.52842/conf.acadia.2009.098
summary	ArtBus is a protocol and hardware bus for interfacing computers to sensors and actuators. It is a distributed interface, meaning that different parts of an ArtBus system can be at different locations in a space. ArtBus devices can be made on any embedded platform or microcontroller. While unconventional in some ways, ArtBus makes use of engineering design inspired by long established supervisory control and laboratory instrumentation practice. At the same time it is a simple, flexible interface which should be viable into the next generation of media devices and embedded control.
keywords	Hardware, sensor, interactive design, media
series	ACADIA
type	Normal paper
email
last changed	2022/06/07 07:54

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2011_127
id	ecaade2011_127
authors	Di Mascio, Danilo; Palka, Pierpaolo
year	2011
title	From the 3D survey “ad Oggetto” to the technological representation of the architecture: The case study of Caporciano
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.829-836
doi	https://doi.org/10.52842/conf.ecaade.2011.829
wos	WOS:000335665500095
summary	In this paper we are to present a research, still in progress, whose main objective is the desire to develop and test an alternative method of surveying, representing and analyzing buildings that are part of a minor historical-artistic heritage. The instruments used and the proposed methodology want to give an alternative to other solutions such as 3D laser scanners and photogrammetry, which would be not only expensive, but also difficult to use in small and irregular spaces, typical of the old Italian villages. The case study that will be presented is Caporciano, a small medieval village in Abruzzo (a region at the centre of Italy), in the internal area of the region affected by a violent earth quake in 2009. This tragic event has put the spotlights on the problems and the fragility of these small villages, which represent an important local resource of cultural importance, and therefore must be preserved for the future generation. In order to properly act in these areas, it is necessary to thoroughly know the actions to be taken for its recovery or conservation, and the present methodology allows the creation of this knowledge made up of several drawings, both two-dimensional and three-dimensional.
keywords	3D survey; cultural heritage; 3d modeling; CAD; Abruzzo region
series	eCAADe
email
last changed	2022/05/01 23:21

_id	sigradi2009_669
id	sigradi2009_669
authors	Jacobi, Martina Maldaner; Jan Halatsch; Antje Kunze; Gerhard Schmitt; Benamy Turkienicz
year	2009
title	A grammar-based system for the participatory design of urban structures [A grammar-based system for the participatory design of urban structures ]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	We propose a three-step participatory design cycle for the early urban design phase that can be integrated into the digital design chain. Step one involves a visualization method that is implemented as an interactive card-based interview technique for the collaborative requirement specification of urban designs. In step two these specifications are a) translated into simplified GIS data and then b) implemented into a grammar-based system together with the corresponding design regulations. The final outcome is a generative and iterative urban model, which includes buildings, building blocks, transportation networks and open spaces that visually communicates spatial impacts of urban design proposals.
keywords	City modeling; participatory design; shape grammars; urban planning
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	caadria2009_092
id	caadria2009_092
authors	Liu, Chun-Hung; Chang-Franw Lee
year	2009
title	The Design of a Mobile Navigation System Based on QR Codes for Historic Buildings
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 103-112
doi	https://doi.org/10.52842/conf.caadria.2009.103
summary	Due to the rapid development of mobile and compact electronic devices such as PDAs and smart phones, designers and developers now have to consider user mobility and the dynamic context of use in the design of interactive systems. In this study, literatures associated with mobile navigation systems in museums and historic buildings are first reviewed in order to understand the features, advantages, and drawbacks of current mobile navigation technology. The feasibility of applying QR codes in the navigation of historic buildings is then discussed, and the mobile navigation principles mentioned in previous literatures are applied in our proposed system. A number of common problems are encountered in the navigation of local historic buildings or museums. Visitors (1) cannot understand what makes an exhibited item a work of art; (2) do not know where to start or how to get started; (3) feel rushed by guides during the guided tour; and (4) find that the audio guide is not clear enough. Managers of historic buildings or museums are generally concerned about (1) the high cost of constructing a mobile navigation environment; (2) possible damage to devices; and (3) the cost of device maintenance. This study attempts to solve the above issues by constructing an affordable digital navigation environment that enables users to clearly understand each exhibited item and its location.
keywords	Mobile navigation; QR code; historic buildings
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	cf2009_353
id	cf2009_353
authors	Meagher, Mark; Van der Maas, David; Abegg, Christian and Huang, Jeffrey
year	2009
title	Dynamic ornament: Climatically responsive surfaces in architectural design
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 353-366
summary	In recent years, sensors and sensor networks have been broadly employed in buildings to monitor diverse aspects of the built environment. Sensors are commonly used to track indoor and outdoor climatic variables such as humidity, temperature, and solar radiation; and to recognize patterns in the activity of people. We propose that in addition to this common instrumental role, data gathered from sensors could also play an important aesthetic and cultural role in the design of engaging architectural spaces. We describe a design study that explores the use of sensor data as a means to qualitatively differen-tiate between spaces within the building, a role traditionally performed by architectural ornament.
keywords	Sentient architecture, thermochromic ink, sensor networks, ornament
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	acadia09_186
id	acadia09_186
authors	Rappaport, Nina
year	2009
title	Real Time / Implication for Production Spaces
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 186-193
doi	https://doi.org/10.52842/conf.acadia.2009.186
summary	Systems of feedback loops and cybernetic methods have influenced for decades the production and consumption networks and supply and demand chains in computer-integrated manufacturing. These mechanisms contribute to the increased efficiency of production, expanding the ability of both manufacturers and production engineers to create a workplace with smoother supply-chain management, as well as economies of scale and scope that are contingent on increased capitalism in a networked, globalized world. Mobility and flexibility are both physical and philosophical imperatives, aided by new small-scaled controls such as handheld wireless devices, which also contribute to a rising culture of nomadism. The shrinking scale of technologies and facilities has provided the mobile worker with numerous opportunities within complexly networked systems, forming a new paradigm for urban production spaces of the future. This paper is an investigation of how technology is changing and reshaping the architectural potentials for the contemporary industrial workplace.
keywords	Industry, technology, history, critique, automation
series	ACADIA
type	Normal paper
email
last changed	2022/06/07 08:00

_id	c25d
id	c25d
authors	Shady Attia, Liliana Beltrán, André De Herde and Jan Hensen
year	2009
title	Architect Friendly: A Comparison of Ten Different Building Performance Simulation Tools
source	IBPSA
summary	Performance Simulation tools BPS is available internationally. The users of those tools are mainly researchers, physicists and experts who value empirical validation, analytical verification and calibration of uncertainty as defined by e.g. BESTEST. However, literature and comparative surveys indicate that most architects who use BPS tools in design practice are much more concerned with the (1) Usability and Information Management (UIM) of interface and (2) the Integration of Intelligent design Knowledge-Base (IIKB). Those two issues are the main factors for identifying a building simulation program as “Architect Friendly”. Now, with the advancement of BPS tools and the recent announcements of direct links between BIM or non-BIM modeling tools and BPS tools it is important to compare the existing programs. Based on an online survey, this paper presents the results of comparing ten major BPS tools. The following programs are compared: ECOTECT, HEED, Energy 10, Design Builder, eQUEST, DOE-2, Green Building Studio, IES VE, Energy Plus and Energy Plus-SketchUp Plugin (OpenStudio). With 249 valid responses, the survey ranked the tools in three classes and revealed that architects seek the IIKB above the UIM of the interface. Finally, the paper summarizes the key findings and underlines the major requirements for future improvement and development of BPS tools, mainly from an architectural perspective.
series	other
type	normal paper
email
more	http://www.ibpsa.org/proceedings/BS2009/BS09_0204_211.pdf
last changed	2011/05/24 07:44

_id	ascaad2009_bhzad_sidawi
id	ascaad2009_bhzad_sidawi
authors	Sidawi, Bhzad
year	2009
title	The Consideration of Lifelong Owner’s and Property’s Characteristics in Nd Cad System: The case of affordable housing in kingdom of Saudi Arabia
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 191-204
summary	Residential property value is affected by several factors during its useful time. . These factors include people’s lifestyles, traditions and culture, and the way they live and interact with the built environment. The property characteristics such as its location, building quality, adaptability, and energy efficiency would also have an impact on the property value. On the other hand, the nD CAD research that emerged in the late 1990s proposed endless dimensions of CAD modelling that would incorporate the building regulations’ requirements, basic user needs and client requirements. However, there is a need to implement lifelong parameters that would have significant effect on the property value in 3D models during the early stages of design. This can be done through a knowledge base integrated into a 3D model and links the lifelong property’s and the user’s characteristics with the property’s value. A survey was carried out on banks and Real Estate Development Fund (REDF) in the Kingdom of Saudi Arabia to find out the level of impact of lifelong users and property characteristics on the property’s value. The results of the survey showed a number of lifelong property and user driven parameters that may have major impact on the property’s value. The implementation of lifelong parameters in nD CAD models would have a number of benefits. It would provide the decision makers such as banks and investors with a tool to assess the level of impact of possible lifelong factors on the property value and consider alternative schemes. Designers would use it during the early stages of design to produce optimum design solutions that provide an adequate product that is evaluated regarding its lifelong value to the end users. Eventually it would provide a comfortable environment that is tailored to the user’s needs and aspirations, while reserving the property’s lifelong value.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	cf2011_p018
id	cf2011_p018
authors	Sokmenoglu, Ahu; Cagdas Gulen, Sariyildiz Sevil
year	2011
title	A Multi-dimensional Exploration of Urban Attributes by Data Mining
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 333-350.
summary	The paper which is proposed here will introduce an ongoing research project aiming to research data mining as a methodology of knowledge discovery in urban feature analysis. To address the increasing multi-dimensional and relational complexity of urban environments requires a multidisciplinary approach to urban analysis. This research is an attempt to establish a link between knowledge discovery methodologies and automated urban feature analysis. Therefore, in the scope of this research we apply data mining methodologies for urban analysis. Data mining is defined as to extract important patterns and trends from raw data (Witten and Frank, 2005). When applied to discover relationships between urban attributes, data mining can constitute a methodology for the analysis of multi-dimensional relational complexity of urban environments (Gil, Montenegro, Beirao and Duarte, 2009) The theoretical motivation of the research is derived by the lack of explanatory urban knowledge which is an issue since 1970‚Äôs in the area of urban research. This situation is mostly associated with deductive methods of analysis. The analysis of urban system from the perspective of few interrelated factors, without considering the multi-dimensionality of the system in a deductive fashion was not been explanatory enough. (Jacobs, 1961, Lefebvre, 1970 Harvey, 1973) To address the multi-dimensional and relational complexity of urban environments requires the consideration of diverse spatial, social, economic, cultural, morphological, environmental, political etc. features of urban entities. The main claim is that, in urban analysis, there is a need to advance from traditional one dimensional (Marshall, 2004) description and classification of urban forms (e.g. Land-use maps, Density maps) to the consideration of the simultaneous multi-dimensionality of urban systems. For this purpose, this research proposes a methodology consisting of the application of data mining as a knowledge discovery method into a GIS based conceptual urban database built out of official real data of Beyoglu. Generally, the proposed methodology is a framework for representing and analyzing urban entities represented as objects with properties (attributes). It concerns the formulation of an urban entity‚Äôs database based on both available and non-available (constructed from available data) data, and then data mining of spatial and non-spatial attributes of the urban entities. Location or position is the primary reference basis for the data that is describing urban entities. Urban entities are; building floors, buildings, building blocks, streets, geographically defined districts and neighborhoods etc. Urban attributes are district properties of locations (such as land-use, land value, slope, view and so forth) that change from one location to another. Every basic urban entity is unique in terms of its attributes. All the available qualitative and quantitative attributes that is relavant (in the mind of the analyst) and appropriate for encoding, can be coded inside the computer representation of the basic urban entity. Our methodology is applied by using the real and official, the most complex, complete and up-to-dataset of Beyoglu (a historical neighborhood of Istanbul) that is provided by the Istanbul Metropolitan Municipality (IBB). Basically, in our research, data mining in the context of urban data is introduced as a computer based, data-driven, context-specific approach for supporting analysis of urban systems without relying on any existing theories. Data mining in the context of urban data; ‚Ä¢ Can help in the design process by providing site-specific insight through deeper understanding of urban data. ‚Ä¢ Can produce results that can assist architects and urban planners at design, policy and strategy levels. ‚Ä¢ Can constitute a robust scientific base for rule definition in urban simulation applications such as urban growth prediction systems, land-use simulation models etc. In the paper, firstly we will present the framework of our research with an emphasis on its theoretical background. Afterwards we will introduce our methodology in detail and finally we will present some of important results of data mining analysis processed in Rapid Miner open-source software. Specifically, our research define a general framework for knowledge discovery in urban feature analysis and enable the usage of GIS and data mining as complementary applications in urban feature analysis. Acknowledgments I would like to thank to Nuffic, the Netherlands Organization for International Cooperation in Higher Education, for funding of this research. I would like to thank Ceyhun Burak Akgul for his support in Data Mining and to H. Serdar Kaya for his support in GIS.
keywords	urban feature analysis, data mining, urban database, urban complexity, GIS
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ijac20097303
id	ijac20097303
authors	Taron, Joshua M.
year	2009
title	Interactive Hemostasis Modeling in Urban Network Design
source	International Journal of Architectural Computing vol. 7 - no. 3,375-387
summary	This paper describes a type of project that images a city as it might exist given the integration of hemostatic procedures within pedestrian networks during emergencies requiring full-scale egress from an urban core. It articulates the steps taken to integrate a pre-existing C++ hemostasis model (C. Jacob, 2008) into Maya software in order to describe how the project operates on a computational level. By projecting these agent-based logics directly into/onto each pedestrian in the city (the smallest unit of the system), egress-oriented infrastructure can shift from being extensively predetermined in form (concrete barriers, metal railing, police barricades, etc.), to something more intensively defined, real-time, and locally on-demand. These procedures are situated within a larger schema based on the structural principles of Norbert Wiener's cybernetic feedback loops, that acknowledge and allow for hybrid (top-down + bottom-up) awareness and control within systems. The project attempts to ally itself with emerging forms of network design with similar structural typologies supported through the use of personal mobile devices (PMDs) in urban environments.
series	journal
last changed	2009/10/20 08:02

_id	acadia13_109
id	acadia13_109
authors	Thün, Geoffrey; Velikov, Kathy
year	2013
title	Adaptation as a Framework for Reconsidering High-Performance Residential Design: A Case Study
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 109-118
doi	https://doi.org/10.52842/conf.acadia.2013.109
summary	This paper outlines an approach to adaptive residential design explored through recent research and an executed prototype, the North House project (2007-2009), undertaken through an interdisciplinary collaboration of researchers and students from the University of Waterloo, Ryerson University and Simon Fraser University in concert with professional and industry partners. This project aimed to develop a framework for the delivery of adaptive detached residential buildings capable of net-zero energy performance in the temperate climate zone, or the near north. Within this project, the term “adaptive” is developed across several tracts of conceptualization and execution including site and climatically derived models for building material composition and envelope ratios, environmentally-responsive kinetic envelope components, intelligent HVAC controls and interactive interface design aimed at producing co-evolutionary behaviors between building systems and inhabitants. A provisional definition of adaptive architecture is outlined to address this range of considerations that calls into question the stable image of domestic architecture and its relationship to energy and contemporary assumptions regarding sustainable design. This paper also outlines computational approaches to design optimization, distributed building systems integration and the human-controls interfaces applicable to the home’s ecology of physical and information technologies.
keywords	next generation technology, responsive buildings, high performance envelopes, sensing and feedback, passive and active systems, energy modeling, user interface
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:58

_id	ijac20097408
id	ijac20097408
authors	Biloria, Nimish; Valentina Sumini
year	2009
title	Performative Building Skin Systems: A Morphogenomic Approach Towards Developing Real-Time Adaptive Building Skin Systems
source	International Journal of Architectural Computing vol. 7 - no. 4, 643-676
summary	Morphogenomics, a relatively new research area, involves understanding the role played by information regulation in the emergence of diverse natural and artificially generated morphologies. Performative building skin systems as a bottom-up parametric formation of context aware interdependent, ubiquitously communicating components leading to the development of continually performative systems is one of the multi-scalar derivations of the aforementioned Morphogenomic understanding. The agenda of adaptations for these building skins specifically corresponds to three domains of adaptation: structural, behavioral and physiological adaptations resulting in kinetic adaptability, energy generation, conservation, transport and usage principles as well as material property based changes per component. The developed skins adapt in real time via operating upon ubiquitous communication and data-regulation protocols for sensing and processing contextual information. Computational processes and information technology based tools and techniques such as parametric design, real-time simulation using game design software, environmental information mapping, sensing and actuating systems coupled with inbuilt control systems as well as manufacturing physical models in collaboration with praxis form a vital part of these skin systems. These experiments and analysis based on developing intrinsic inter-dependencies between contextual data, structure and material logistics thus lay the foundation for a new era of continually performing, self powering, real-time adaptive intelligent building skin systems.
series	journal
last changed	2010/09/06 08:02

_id	cf2011_p060
id	cf2011_p060
authors	Sheward, Hugo; Eastman Charles
year	2011
title	Preliminary Concept Design (PCD) Tools for Laboratory Buildings, Automated Design Optimization and Assessment Embedded in Building Information Modeling (BIM) Tools.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 451-476.
summary	The design of laboratory buildings entails the implementation of a variety of design constraints such as building codes; design guidelines and technical requirements. The application of these requires from designers the derivation of data not explicitly available at early stages of design, at the same time there is no precise methodology to control the consistency, and accuracy of their application. Many of these constraints deal with providing secure environmental conditions for the activities inside laboratories and their repercussions both for the building occupants and population in general, these constraints mandate a strict control over the building‚Äôs Mechanical Equipment (MEP), in particular the Heating Ventilating and Air Conditioning (HVAC) system. Due to the importance of these laboratory designers are expected to assess their designs not only according spatial relationships, but also design variables such as HVAC efficiency, air pressure hierarchies, operational costs, and the possible implications of their design decisions in the biological safety of the facility. At this point in time, there are no practical methods for making these assessments, without having constant interaction with HVAC specialists. The assessment of laboratory design variables, particularly those technical in nature, such as dimensioning of ducts or energy consumption are usually performed at late stages of design. They are performed by domain experts using data manually extracted from design information, with the addition of domain specific knowledge, the evaluation is done mostly through manual calculations or building simulations. In traditional practices most expert evaluations are performed once the architectural design have been completed, the turn around of the evaluation might take hours or days depending on the methods used by the engineer, therefore reducing the possibility for design alternatives evaluation. The results of these evaluations will give clues about sizing of the HVAC equipment, and might generate the need for design reformulations, causing higher development costs and time delays. Several efforts in the development of computational tools for automated design evaluation such as wheel chair accessibility (Han, Law, Latombe, Kunz, 2002) security and circulation (Eastman, 2009), and construction codes (ww.Corenet.gov.sg) have demonstrated the capabilities of rule or parameter based building assessment; several computer applications capable of supporting HVAC engineers in system designing for late concept or design development exist, but little has been done to assess the capabilities of computer applications to support laboratory design during architectural Preliminary Concept Design(PCD) (Trcka, Hensen, 2010). Developments in CAD technologies such as Building Information Modeling (BIM) have opened doors to formal explorations in generative design using rule based or parametric modeling [7]. BIM represents buildings as a collection of objects with their own geometry, attributes, and relations. BIM also allows for the definition of objects parametrically including their relation to other model objects. BIM has enabled the development of automated rule based building evaluation (Eastman, 2009). Most of contemporary BIM applications contemplate in their default user interfaces access to design constraints and object attribute manipulations. Some even allow for the application of rules over these. Such capabilities make BIM viable platforms for automation of design data derivation and for the implementation of generative based design assessment. In this paper we analyze the possibilities provided by contemporary BIM for implementing generative based design assessment in laboratory buildings. In this schema, domain specific knowledge is embedded in to the BIM system as to make explicit design metrics that can help designers and engineers to assess the performance of design alternatives. The implementation of generative design assessments during PCD can help designers and engineers to identify design issues early in the process, reducing the number of revisions and reconfigurations in later stages of design. And generally improving design performance.
keywords	Heating ventilating and Air Conditioning (HVAC), Building Information Models (BIM), Generative Design Assessment
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cf2009_poster_23
id	cf2009_poster_23
authors	Thorpe, Graham and Sam Kashuk
year	2009
title	A Syncretization Of Architecture, Engineering And Science:The use of CAD technology as a pedagogical tool in the teaching of environmentally sustainable design
source	T. Tidafi and T. Dorta (eds) Joining Languages Cultures and Visions: CAADFutures 2009 CD-Rom
summary	Energy consumption in buildings is responsible for about 40% of Australia’s greenhouse gas emissions. It is quite feasible that the energy consumption in buildings can be halved, but energy performance analysis must be integral to the entire design process. This imperative has led the authors to propose that architecture, engineering and science should be syncretized in the design process. This syncretization shares some features of the rhizomatic approach introduced by Deleuze and Guattari (2007). In rhizomatic systems all points can be, and should be connected. A rhizome can be considered as a space that develops, not from a point but from milieux. In the expansion of a rhizome, elements of the system do not follow tracings of other elements but they form a map of new vistas. Likewise, a syncretic approach is oblivious to the traditional boundaries between architecture, engineering and science. Syncretization has the potential to enrich the intellectual lives of architects, scientists and engineers, and it would have profoundly beneficial performative benefits.
keywords	Syncretic, rhizome architecture, engineering, sustainability, education
series	CAAD Futures
type	poster
last changed	2009/07/08 22:12

_id	ascaad2009_mai_abdelsalam
id	ascaad2009_mai_abdelsalam
authors	Abdelsalam, Mai
year	2009
title	The Use of the Smart Geometry through Various Design Processes: Using the programming platform (parametric features) and generative components
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 297-304
summary	The emergence of parametric generative design tools and prototyping manufacturing technology led to radical changes in architectural morphologies. This change increased the opportunity to develop innovative smart geometries. Integrating these algorithms in the parametric softwares led to variations in building design concepts increasing alternatives and decreasing the repetitive work previously needed in conventional CAD software. The chosen software in this research is Generative Components (GC). It is a software design tool for an associative and parametric design platform. It is tested for using Global Variables with associative functions during the concept creation and form GC comprises features. The results presented in this research may be considered an introduction to the smart geometry revolution. It deals with the generative design which applied in the design process from conceptual design phase, defining the problem, exploring design solutions, then how to develop the design phases. Office building is a building type which encourages new forms that needs computational processes to deal with repetitive functions and modular spaces and enclosed in a flexible creative structural skin. Generative design helps the office buildings to be arranged, analysed, and optimized using parameters in early stages in design process. By the end of the research, the use of the smart geometry in a high rise office building is defined and explained. The research is divided into three parts, first a summary of the basic theories of office buildings design and the sustainable requirements that affect it, and should be integrated. Secondly, the previous experiences in generating office buildings by Norman foster and Sergio Araya. At last, a case study is proposed to test and evaluate the use of the parametric generative methodology in designing an office building with specific emphasis on the function, environmental aspects and form generation using Generative Components (GC) Software.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	sigradi2009_821
id	sigradi2009_821
authors	Beirão, José Nuno; Nuno Montenegro; Jorge Gil; José P. Duarte; Rudi Stouffs
year	2009
title	The city as a street system: A street description for a city ontology
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	The street system is an important component of the city ontology created for a generative urban design tool and should be able to integrate the many visions or interpretations that designers or other urban design agents may have about streets. This paper describes several characteristics of the street system, with its components organized into object classes which are the shape sets of algebras used by a generation module to generate street network representations that can be assessed by a GIS platform.
keywords	Ontology; urban design; shape grammars; planning
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cf2009_314
id	cf2009_314
authors	Boerner, Andrea; Maquil, Valérie
year	2009
title	Enhancing synergies between computer science and urban disciplines: Semi-automated applications for tangible user interfaces, a case study
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 314-327
summary	This paper explores an interdisciplinary design approach for coupling semi-automated applications with tangible user interfaces. It describes communication methods based on parameters and diagrams, between computer scientists and urban, architectural professionals and the matching abilities to give meaning to the various parts and elements of the system. By means of the development of two rule based applications it exploits different degrees of automation and kinds of feedback possibilities and its impact on discourse and decision making. It discusses design methods for interactive urban planning applications, which integrate the different requirements and benefits from both disciplines.
keywords	Tangible user interfaces, semi-automation, decision making, urban planning
series	CAAD Futures
email
last changed	2009/06/08 20:53

For more results click below: