Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 451

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2023_317
id	ecaade2023_317
authors	Zamani, Alireza, Mohseni, Alale and Bertug Çapunaman, Özgüç
year	2023
title	Reconfigurable Formwork System for Vision-Informed Conformal Robotic 3D Printing
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, pp. 387–396
doi	https://doi.org/10.52842/conf.ecaade.2023.1.387
summary	Robotic additive manufacturing has garnered significant research and development interest due to its transformative potential in architecture, engineering, and construction as a cost-effective, material-efficient, and energy-saving fabrication method. However, despite its potential, conventional approaches heavily depend on meticulously optimized work environments, as robotic arms possess limited information regarding their immediate surroundings (Bechthold, 2010; Bechthold & King, 2013). Furthermore, such approaches are often restricted to planar build surfaces and slicing algorithms due to computational and physical practicality, which consequently limits the feasibility of robotic solutions in scenarios involving complex geometries and materials. Building on previous work (Çapunaman et al., 2022), this research investigates conformal 3D printing of clay using a 6 degrees-of-freedom robot arm and a vision-based sensing framework on parametrically reconfigurable tensile hyperbolic paraboloid (hypar) formwork. In this paper, we present the implementation details of the formwork system, share findings from preliminary testing of the proposed workflow, and demonstrate application feasibility through a design exercise that aims to fabricate unique components for a poly-hypar surface structure. The formwork system also offers parametric control over generating complex, non-planar tensile surfaces to be printed on. Within the scope of this workflow, the vision-based sensing framework is employed to generate a digital twin informing iterative tuning of the formwork geometry and conformal toolpath planning on scanned geometries. Additionally, we utilized the augmented fabrication framework to observe and analyze deformations in the printed clay body that occurs during air drying. The proposed workflow, in conjunction with the vision-based sensing framework and the reconfigurable formwork, aims to minimize time and material waste in custom formwork fabrication and printing support materials for complex geometric panels and shell structures.
keywords	Robotic Fabrication, Conformal 3D Printing, Additive Manufacturing, Computer-Vision, Reconfigurable Formwork
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ijac20108404
id	ijac20108404
authors	Erhan, Halil; Nahal H. Salmasi, Rob Woodbury
year	2010
title	ViSA: A Parametric Design Modeling Method to Enhance Visual Sensitivity Control and Analysis
source	International Journal of Architectural Computing vol. 8 - no. 4, p. 461
summary	The ability of parametric computer-aided design systems to generate models rapidly enables designers to explore the downstream impacts of changes to key design parameters. However, the typical modeling functions provided in the parametric systems can become insufficient when such exploration is needed for increasingly complex parametric design models. Main challenges for exploration that we observed are control and analysis of changes on the design model and in particular, when they are introduced continuously. The system interfaces and the human-visual perception system alleviate these challenges. In this study, we demonstrate ViSA, a Visual Sensitivity Analysis method that aims to make the effects of change within a parametric model controllable, measurable and apparent for designers. The approach aims to improve visually analyzing the sensitivity of a design model to planned parametric changes. The method proposes customizable control and visualization features in the model that are decoupled from each other at the design level, while providing interfaces between them through parametric associations. We present findings from our case studies in addition to the results of a user study demonstrating the applicability and limitations of the proposed method.
series	journal
last changed	2019/05/24 09:55

_id	ascaad2010_089
id	ascaad2010_089
authors	Hemmerling, Marco
year	2010
title	Origamics
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 89-96
summary	Folding strategies in architecture have been explored since the 1990s – if not before – as a method to generate spatial and structural concepts by applying complex geometries. These strategies are generally related to an analogue working method that involves paper folded models rather than digital form finding processes. Against this background the paper focuses on the impact and possibilities of folding principles from origami for the digital design process in using parametric software to generate integral and adaptive systems within an experimental and intuitive design approach.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	caadria2020_023
id	caadria2020_023
authors	Liu, Chenjun
year	2020
title	Double Loops Parametric Design of Surface Steel Structure Based on Performance and Fabrication
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 23-33
doi	https://doi.org/10.52842/conf.caadria.2020.1.023
summary	In intelligent epoch, automatic parameter design systems reduce the requirements of the skills needed to create objects. The creator only needs to select the most perceptual primitive form to automatically generate the data system that iterates to the most efficient solution. In this paper, a method of combining performance driven optimization with parametric design is proposed. The iterative evolution is under the control of performance loop and fabrication loop, which makes all the data provided by parametric design in a practical project available for exploring structural analysis and digital prefabrication. Related to the case of surface steel structure, parametric optimization is not limited to a set of shape types or design problems, it would be based on the generality and built-in characteristics of parametric modelling environment in the most convenient and flexible way. (Rolvink et al. 2010)And the given parameters would be fed back on geometric structure, performance indicators, and design variables, so that designers can easily and effectively coordinate and try different solutions. The system transforms the generated data into machine language so that the process including design, analysis, manufacturing, and construction can maintain the orthogonal persistence of the data.
keywords	parametric design; component prefabrication; curved steel structure; performance driven
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2010_114
id	ecaade2010_114
authors	Apollonio, Fabrizio I.; Gaiani, Marco; Corsi, Cristiana
year	2010
title	A Semantic and Parametric Method for 3D Models used in 3D Cognitive-Information System
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.863-872
doi	https://doi.org/10.52842/conf.ecaade.2010.863
wos	WOS:000340629400092
summary	The paper presents an innovative semantic and parametric method to build 3D models to be used in cognitive-information systems. We integrated structured geometrical and documentary information resulting from multiple sources with the aim to enhance the knowledge of those sites within the frame of their historical evolution and their institutional management in a 3D GIS/DB. The developed applications were designed for different types of users, with a largely scalable interface, able to support different output devices and to work at different levels of iconicity. The system allows a full comprehension of the buildings in their own context, permitting to discover unknown relationships, to evaluate their architectural occupancy and to quickly access a complex system of information.
keywords	3D-GIS; Semantic modeling; 3D reality-based modeling; Real-time rendering; Virtual heritage
series	eCAADe
email
last changed	2022/06/07 07:55

_id	acadia10_263
id	acadia10_263
authors	Beaman, Michael Leighton; Bader, Stefan
year	2010
title	Responsive Shading \| Intelligent Façade Systems
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 263-270
doi	https://doi.org/10.52842/conf.acadia.2010.263
summary	As issues of sustainability gain traction for architects, methodologies for designing, analyzing, and calibrating design solutions have emerged as essential areas of research and development. A number of approaches have been pursued with regard to embedding data into the design process, most fall into one of two approaches to research. The first approach is to mediate environmental impact at the level of applied technology; the second alters building methods and material construction, generating efficient energy use. However, few approaches deal with the crafting of relationships between information and performance on an architectural level. We will examine an approach focused on understanding how crafting relationships between information and design can move architecture towards achieving sustainability. In developing this approach, we created a data-driven design methodology spanning from design inception to construction. Data-driven models, common in the fields of natural science, offer a method to generate and test a multiplicity of responsive solutions. By contextualizing the solutions generated, we were able design though a set of specific and controlled responses rather than as a singular solution. Information utilization requires a new kind of craft that moves beyond instances into relationships and offers performance sensitive issues in design a focused trajectory. We applied this method to the research and development of a responsive shading structure built in conjunction with a thermal testing lab for two test locations – Austin, Texas (Figure. 1 and 2) and Munich, Germany. The following paper chronicles the design and construction at the Texas site over an academic semester.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ijac20108206
id	ijac20108206
authors	Bravo, Germán; Rafael Villazón, Augusto Trujillo, Mauricio Caviedes
year	2010
title	Authoring Tools for KOC - Concepts and Pedagogical Use
source	International Journal of Architectural Computing vol. 8 - no. 2, 183-200
summary	One of the main problems of teachers aiming to teach the construction techniques used in to build a building is the lack of practical examples to show to their students. In order to be useful, these examples must come from real projects or even better the teachers may take their students to constructions sites, but this latter option is not always available and may be dangerous. To deal with this problem, Los Andes University has committed the construction of a knowledge repository containing information gathered from real projects and semantically described, in order to provide easy access to its content and in the language of people of construction. This project is called KOC, standing for Knowledge Objects of Construction, which uses an ontology to describe semantically the data contained in the repository. Being the pedagogical objective of the project, it is important to provide the teachers with additional tools to generate new knowledge objects, based on existing knowledge objects in the repository. This paper presents three composition tools for KOC: a complex objects composer issued from structured searches, a constructive processes composer and a case study composer, all of them aiming the improvement of learning quality in the technical area of building construction at the architecture and engineering schools. The paper also shows some examples of knowledge objects and how KOC is been used in the courses of the Architecture Department of Los Andes.
series	journal
last changed	2019/05/24 09:55

_id	ijac20108203
id	ijac20108203
authors	Chevrier, Christine; Nathalie Charbonneau, Pierre Grussenmeyer, Jean-Pierre Perrin
year	2010
title	Parametric Documenting of Built Heritage: 3D Virtual Reconstruction of Architectural Details
source	International Journal of Architectural Computing vol. 8 - no. 2, 135-150
summary	This paper examines 3D modelling of architectural elements with the help of parametric components. Such components may be useful within the framework of projects dealing with virtual 3D reconstruction of heritage monuments. Architectural components of the built heritage often have complex geometry. We studied the various geometrical shapes of a given architectural element, representative of a specific period and place. This study allowed us to identify the parameters and to implement parametric objects (in Maya Environment [1]). We also developed a Graphical User Interface (GUI) to answer the user's needs while generating the 3D model representing the architectural element. Within this GUI, the user is able to make adjustments with the help of laser point clouds from laserscanning, 2D plans or photographs. We exemplify our method with a case study dealing with openings and lintels. The corpus under study consists of elements of the built heritage of Montreal (Canada) and Nancy (France).
series	journal
last changed	2019/05/24 09:55

_id	ecaade2010_140
id	ecaade2010_140
authors	Chronis, Angelos; Liapi, Katherine A.
year	2010
title	Parametric Approach to the Bioclimatic Design of a Student Housing Building in Patras, Greece
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.313-319
doi	https://doi.org/10.52842/conf.ecaade.2010.313
wos	WOS:000340629400033
summary	A new housing complex on the Campus of the University of Patras, Greece, is expected to serve as a test-bed for experimentation with a parametric design process that integrates significant climatic data. To optimize the environmental performance of the proposed housing complex a parametric design algorithm has been developed. The algorithm links the weather data in the area with the site topography and the basic geometric features of the buildings on the site. To explore the interaction of the building features with the prevailing winds in the area and the solar exposure throughout the year various software applications, including computational fluid dynamics (CFD) simulations, have been utilized. The inclusion of wind data in the algorithm renders it particularly effective. The developed parametric process has been useful during the early design phase when studies on various patterns for arranging the buildings on the site were conducted. The parametric process has facilitated the configuration of the typical building block as well.
keywords	Bioclimatic design; Parametric design; Design algorithms; Sun control; Wind analysis; CFD in building design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2010_166
id	ecaade2010_166
authors	Geyer, Philipp; Buchholz, Martin
year	2010
title	System-Embedded Building Design and Modeling: Parametric systems modeling of buildings and their environment for performance-based and strategic design
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.641-650
doi	https://doi.org/10.52842/conf.ecaade.2010.641
wos	WOS:000340629400069
summary	The paper proposes Parametric Systems Modeling (PSM) as a tool for building and city planning. The outlined method is based on the Systems Modeling Language (SysML) and is intended for design, dimensioning, and optimization of buildings and cities as systems. The approach exceeds the geometric approach, considers additional information from physics, technology, as well as biology, and provides a basis for multidisciplinary analyses and simulations. Its application aims at the exploration of innovative sustainable design solutions at system level. The proposal of an innovative buildinggreenhouse-city system serves to illustrate the approach. Features of this system are closed water cycles, renewable energy use, thermo-chemical energy storage and transport of energy for heating and cooling purposes on the base of desiccants, as well as recycling of CO2 , accumulation of biomass and related soil improvement.
keywords	Parametric systems modeling; Systems design and engineering; Sustainable city system; City-integrated greenhouse
series	eCAADe
email
last changed	2022/06/07 07:50

_id	1fce
id	1fce
authors	Harding J, Derix C
year	2010
title	Associative Spatial Networks in Architectural Design - Artificial Cognition of Space using Neural Networks with Spectral Graph Theory
source	Design Computation Cognition conference 2010
summary	This paper looks at a new way of employing unsupervised neural networks in the design of an architectural system. The method described involves looking the whole lifecycle of a building and its coupling with its environment. Techniques such as dimensionality reduction, it is argued, are well suited to architectural design whereby complex problems are commonplace. An example project is explored - that of an exhibition space where multiple ephemeral exhibitions are housed at any given time. A modified growing neural gas algorithm is employed in order cognize similarities of spaces whose nature are not known a priori. By utilising the machine, a coupling between the building system and the users of the space is explored throughout the whole project life of the design.
keywords	space planning, architectural design, neural networks, cognition
series	other
type	normal paper
email
more	http://www.springer.com/engineering/mechanical+engineering/book/978-94-007-0509-8
last changed	2012/09/17 21:34

_id	sigradi2010_133
id	sigradi2010_133
authors	Herrera, Pablo; Dreifuss Cristina
year	2010
title	Visualización y diagramas de material bibliográfico complejo [Visualization and diagrams of complex bibliographic material]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 133-136
summary	In this paper we present a method of synthesizing data in the narrative discourse of two architecture publications, in order to analyze, compare and explore to what extent it is possible to understand a book on different abstract levels using static data. The information in the book is reorganized and shown in different diagrams, used as a didactic visualization method. This allows the representation of a set of kinetic information that cannot be perceived simultaneously.
keywords	diagrams, visualization, data base, information architecture
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	caadria2010_004
id	caadria2010_004
authors	Jowers, Iestyn; Miquel Prats, Hesham Eissa and Ji-Hyun Lee
year	2010
title	A study of emergence in the generation of Islamic geometric patterns
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 39-48
doi	https://doi.org/10.52842/conf.caadria.2010.039
summary	Generative design is concerned with the definition and exploration of design spaces, and it has been suggested that emergence plays a key role in this process. In this paper, the impact of emergence on a design space is explored via consideration of different methods used to generate designs in a particular style. Three distinct methods of generating Islamic geometric patterns have been investigated and the extent to which emergence is employed in these methods has been explored. This research supports a discussion on the role of emergence in generative design, and an investigation into how design spaces are affected by the type of emergence employed in a generative process.
keywords	Islamic geometric patterns; emergence; design space; design generation
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ascaad2010_161
id	ascaad2010_161
authors	Loemker, Thorsten Michael
year	2010
title	Design and Simulation of Textile Building Elements
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 161-170
summary	In this paper we examine the use of textile building elements and investigate on their potential scope of application in architecture. Other than commonly used for spanned or tent-like structures we concentrate on the use of textiles for folded, crinkled and procumbent assemblies, as these seem to correspond much better with the textiles´ inherent properties. On closer examination of these properties it becomes obvious that fabric primarily exists in a loose, uneven and irregular physicality that can be adjusted and configured into different states that match specific criteria. That is why fabric is mainly used for covering, protecting or hiding objects, e.g. as apparel for people. Only at a second glance does one recognize that textiles can be used for many other purposes such as collecting, separating, filtering or even healing. Thus, in the first instance of this research we examined customary usages and classified them into different categories that aided us to further develop practical application areas for the architectural domain. Subsequently to the fact that the shape of a textile might alter under the influence of forces, the further focus of this research lied on the appraisal of digital simulation techniques and simulation engines to provide sophisticated instruments for the generation of the associated time-based geometric form of the fabric. External elements that might drive this deformation process such as wind, temperature, precipitation, as well as static and dynamic building components were considered in the simulation process in order to generate visual output of the corresponding shapes. Studies about bipartite materials that can control the deformation process and might lead the textile beyond its primary functionality conclude this work.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	acadia10_151
id	acadia10_151
authors	Menges, Achim
year	2010
title	Material Information: Integrating Material Characteristics and Behavior in Computational Design for Performative Wood Construction
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 151-158
doi	https://doi.org/10.52842/conf.acadia.2010.151
summary	Architecture as a material practice is still predominantly based on design approaches that are characterized by a hierarchical relationship that prioritizes the generation of geometric information for the description of architectural systems and elements over material specific information. Thus, in the early design stage, the material’s innate characteristics and inherent capacities remain largely unconsidered. This is particularly evident in the way wood constructions are designed today. In comparison to most construction materials that are industrially produced and thus relatively homogeneous and isotropic, wood is profoundly different in that it is a naturally grown biological tissue with a highly differentiated material makeup . This paper will present research investigating how the transition from currently predominant modes of representational Computer Aided Design to algorithmic Computational Design allows for a significant change in employing wood’s complex anisotropic behaviour, resulting from its differentiated anatomical structure. In computational design, the relation between procedural formation, driving information, and ensuing form, enables the systematic integration of material information. This materially informed computational design processes will be explained through two research projects and the resultant prototype structures. The first project shows how an information feedback between material properties, system behaviour, the generative computational process, and robotic manufacturing allows for unfolding material-specific gestalt and tapping into the performative potential of wood. The second project focuses on embedding the unique material information and anatomical features of individual wooden elements in a continuous scanning, computational design and digital fabrication process, and thus introduces novel ways of integrating the biological variability and natural irregularities of wood in architectural design.
keywords	Computational Design, Digital Fabrication, Material Properties, Behavioural Modelling
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:58

_id	ijac20108201
id	ijac20108201
authors	Muslimin, Rizal
year	2010
title	Interweaving Grammar: Reconfiguring Vernacular Structure Through Parametric Shape Grammar
source	International Journal of Architectural Computing vol. 8 - no. 2, 93-110
summary	This paper re-examines the interweaving method to demonstrate how architectural computation can reinterpret the advantages of this traditional crafting techniques for its geometrical compatibility and rule generativity. Firstly, the technique analyzes and reconfigures load distribution of a traditional interwoven surface to mimic its structural principle. Secondly, from this structural reconfiguration, the study applies parametric shape grammar to define interweaving rules. The rules generate various patterns with rigid local materials that fit the size of human hand. The experiment in this study shows that interweaving grammar can generate ornamental-structural components with three different load distributions, three different segmented materials and in three different spatial dimensions (point, line and plane).
series	journal
last changed	2019/05/24 09:55

_id	ascaad2010_171
id	ascaad2010_171
authors	Schimek, H.; A. Meisel and T. Bogenperger
year	2010
title	On Connecting Panels of Freeform Building Envelopes
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 171-178
summary	As smooth geometric shapes are very tricky to manufacture with an overall great expense this paper presents a parametrical approach how to control the joint geometry within a framework of flat panels which approximate a freeform surface using discretization. Since timber has an excellent reputation as a sustainable and regenerative material plus the fact that timber can be perfectly processed with a large variety of tools including CNC milling machines we are using cross laminated timber boards (CLT) with large and heavy members. Hence that means dealing with high forces which require geometrically exact and often complex joints, which we want to push to a high degree of automation in the design process. We establish rules and constraints between all neighboring CLT-panels. That way we control a new connector system specially designed for non-standard CLT-joints. This paper documents the status of one aspect of an ongoing research project and will also give a preview to upcoming tasks including the production of a prototype structure.
series	ASCAAD
type	normal paper
email
last changed	2011/03/01 07:46

_id	ascaad2010_075
id	ascaad2010_075
authors	Schubert, Gerhard; Kaufmann Stefan and Petzold Frank
year	2010
title	Project Wave 0.18
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 75-88
summary	In recent years a number of projects have been emerged, in which the new possibilities of the computer as a design tool, have been used. Through the digital chain from design to manufacturing the efficiency has increased and allows the implementation of complex architectural structures. With all these new opportunities, also new challenges arise in the teaching and the educational concepts. The paper describes the detailed course concept and the didactic strategy using the example of a parametric designed roof structure, we designed, planed and build up in scale 1:1 within the main course. „Wendepunkt\|e im Bauen“ (Turning point\|s of building) is the name of an exhibition at the “Pinakothek der Moderne” in Spring 2010. In addition to contributions of the industrialization in the building industry from 1850 to the present day, the exhibition also serves as a platform, to demonstrate new possibilities of computer-aided parametric design and the closely related computer aided manufacturing (CAM). In this context, we took the chance to build a sculpture in Scale 1:1 to show the potential of a constant digital workflow and the digital fabrication. Through the digital chain from design to manufacturing, the efficiency has been increased by the computer and allows the implementation of new complex architectural structures. But the efficiency of the high-degree-automation through the use of computerized machines usually ends in the production of the components. Because this coincidence of the elements in the assembly often proves cost and time, the aim of the project was to optimize both, the production of components and their assembly as well. As part of the wintercourse 2009/2010 different aspects of automation have been reviewed and new solutions have been analyzed. Together with 15 students of the Faculty of Architecture the complete digital chain started with the first design ideas, about parametric programming through production and assembly had been researched, implemented and brought to reality. In the first steps, the students had to learn about the potential, but also about the problems coming with the digital-design and the attached digital-production. There for the course took part at our computerlab. In weekly workshops, all ideas have been implemented and tested directly in the 3-dimensional parametric model. And thanks to the interdisciplinary work with the Department of Structural Design also static factors had been considered, to optimize the form. Parallel to the digital form-finding process, the first prototypes have been produced by the students. By using the chairs 3D-CNC-Mills we were able to check the programmed connection detail in reality and apply the so learned lessons to the further development. After nearly 3 month of research, designing, planning and programming, we were able to produce the over 1000 different parts in only 4 days. By developing a special pre-stressed structure and connection detail it was also possible, to assemble the whole structure (13.5m x 4.5m x 4m) in only one day. The close connection between digital design (CAD) and digital manufacturing (CAM) is an important point of our doctrine. By the fact, that the students operate the machines themselves, but also implement projects on a scale of 1:1, they learn to independently evaluate these new tools and to use them in a meaningful way.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	ecaade2010_100
id	ecaade2010_100
authors	Stavric, Milena; Hirschberg, Urs; Wiltsche, Albert
year	2010
title	Spatializing Planar Ornaments: Towards esthetic control in segmenting and building curved surfaces
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.437-443
doi	https://doi.org/10.52842/conf.ecaade.2010.437
wos	WOS:000340629400047
summary	This paper gives insight into an ongoing funded research project dealing with architectural geometry and nonstandard fabrication methods. The innovative aspect of the project lies in the way it uses geometric ornamentation as a method to control the construction of double curved free-form surfaces out of planar building elements. After a short outline of the state of the art the paper gives an overview of the project’s novel constructive and esthetic approach to the planarization of curved forms, discusses the implications of the approach and presents some preliminary results.
keywords	Architectural geometry; Nonstandard structures; Ornament; Mass customization
series	eCAADe
email
last changed	2022/06/07 07:56

For more results click below: