Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 441

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2010_019
id	ascaad2010_019
authors	Katz, Neil C.
year	2010
title	Algorithmic Modeling; Parametric Thinking: Computational Solutions to Design Problems
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 19-36
summary	Architects and designers have often used computational design techniques in their design process, even without "computers", from designing spaces which activate at the instant of the solstice sunrise, to creating geometrically complex and structurally innovative cathedrals. Designing with rules and variables can lead to solutions which satisfy the design criteria and may result in interesting and unanticipated models. Computational design is a process of designing and a way of thinking; contemporary tools can promote and enhance this process. Algorithmic and parametric modeling (and thinking) can be powerful processes in design, and particularly in working with complex geometry and addressing project constraints and analytical and data-driven design. This paper describes these methods and provides examples of their use on projects at Skidmore, Owings & Merrill.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	ascaad2010_117
id	ascaad2010_117
authors	El Gewely, Maha H.
year	2010
title	Algorithm Aided Architectural Design (Aaad)
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 117-126
summary	Algorithm Aided Architectural Design (AAAD) is considered a second paradigm shift in the Architectural design process after the first one of bridging the conventional design process to the digital realm of design. This paper is divided into two parts, the first part comprehends the Algorithmic Architecture approach of from the point of view of tools, techniques, theories and practice in order to find the Algotecture theories on the map of Digital Architecture. Then, the paper exemplifies an application on Algorithmic Architecture. FALLINGWATER TOOLBOX VERSION 1.0 is a computational design demo tool for architects to aid in the house schematic design phase according to an analytical study of Frank Lloyd Wright's basic design rules and spatial program of his masterpiece; FallingWater House, (Edgar J. Kaufmann family house 1939). These rules have been transferred to algorithms and code thereafter. At a preceding stage, the Graphical User Interface (GUI) was developed using MAXScript 9.0. Using the FALLINGWATER TOOLBOX, infinite number of house prototypes can be generated within few minutes. Although, the FWT is based on a hypothetical design problem of producing prototype alternatives for a new house with the same identity of the Edgar Kaufmann House, the concept of the tool can be applied on a wider range of problems. It may help generating prototype alternative solutions for residential compounds design according to the required constraints.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	sigradi2021_189
id	sigradi2021_189
authors	Paiva Ponzio, Angelica, Giudoux Gonzaga, Mario, Pires de Castro Aguiar Vale, Marina, Bruscato, Underléa Miotto and Mog, William
year	2021
title	Parametric Design Learning Strategies in the Context of Architectural Design Remote Teaching
source	Gomez, P and Braida, F (eds.), Designing Possibilities - Proceedings of the XXV International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2021), Online, 8 - 12 November 2021, pp. 1077–1088
summary	This article aims to demonstrate how a theoretical-didactic model and its respective teaching strategies for algorithmic-parametric logic can act as potential elements of innovation in the architectural design process. Based on the theories of parametric design thinking by Oxman (2017) and the studies by Woodbury (2010) and Romcy (2017), such strategies are based on the principle that algorithmic logic can be understood, in certain circumstances, as a procedural framework and not just an instrumental one. It will also be discussed how the situation of remote learning in the face of the COVID-19 crisis brought about the use of virtual teaching tools as an increment of the learning process.
keywords	Architectural teaching, computational design, parametric design thinking, design process, algorithmic design
series	SIGraDi
email
last changed	2022/05/23 12:11

_id	acadia10_313
id	acadia10_313
authors	Banda, Pablo
year	2010
title	Parametric Propagation of Acoustical Absorbers
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 313-319
doi	https://doi.org/10.52842/conf.acadia.2010.313
summary	The following paper deals with a performance-driven morphogenetic design task to improve the conditions of room acoustics, using as a case study the material laboratory of the School of Architecture at Federico Santa Maria University of Technology. Combining contemporary Parametric Modeling techniques and a Performance- Based approach, an automatic generative system was produced. This system generated a modular acoustic ceiling based on Helmholtz Resonators. To satisfy sound absorption requirements, acoustic knowledge was embedded within the system. It iterates through a series of design sub-tasks from Acoustic Simulation to Digital Fabrication, searching for a suitable design solution. The internal algorithmic complexity of the design process has been explored through this case study. Although it is focused on an acoustic component, the proposed design methodology can influence other experiences in Parametric Design.
keywords	Parametric Modeling, Sound Absorption & Acoustic Knowledge, Performance-Based Design, Design Task, Scripting, Digital Fabrication, Custom Tools, Honeycomb.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	caadria2010_013
id	caadria2010_013
authors	Hewett, B. and A. Burke
year	2010
title	Open tower: developing design research practice
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 137-146
doi	https://doi.org/10.52842/conf.caadria.2010.137
summary	This paper critically reflects on computational methods of design in relation to social and environmental sustainability design research within contemporary and future tall building typology. It develops the author’s experience in large-scale building design practice into academic design research. The analysis of tall building typology is presented initially in the context of practice, followed by its development in an architectural master’s studio. The authors discuss their design research within a practice context that determined the question: what opportunities do computational processes offer to the conception of the tall building typology? Its transference to an educational research context allowed for the deeper exploration and development of a position on algorithmic and parametric methods, their relevance to the typology of the contemporary tall building and complex architectural scenarios.
keywords	Computational; tower; practice; research; typology; teaching
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ascaad2010_135
id	ascaad2010_135
authors	Lostritto, Carl
year	2010
title	Computation Without Computers
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 135-144
summary	This work documents the implications of using physical media to teach digital design concepts, techniques, values and approaches. With the pedagogy and work of a seminar and studio across two Universities as test cases, this research seeks to prove that a parametric and algorithmic approach to architecture is most fruitfully understood as the connection between logic, mathematics and aesthetics. Students trace the indirect relationships between process and product so as to enable the application of these connections in a non-linear, exploratory and goal-flexible design process. The first phase of student work involves the creation of an image, constructed with ink or graphite on paper, that embodies a parametric aesthetic. Students are tasked articulating and performing operations, such as dividing a curve, packing shapes, and conditional transformations. Subsequently, students fabricate a surface-conscious model with modules that have the capacity to vary based on their grid parameter, using historically rooted techniques such as weaving, perforating, layering and tessellation. Digital fabrication and parametric modeling is then introduced, not as a means to a predefined end, but as another medium, capable of participating with manual techniques. As an example, a fabricated paper-based installation is generated with parametrically generating a cut-sheet, partially blind to its assembled manifestation. The hypothesis of this research is tested in more comprehensive projects that follow as environmental forces are resolved through dynamic and ambiguous visual and spatial conditions.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	ecaade2010_166
id	ecaade2010_166
authors	Geyer, Philipp; Buchholz, Martin
year	2010
title	System-Embedded Building Design and Modeling: Parametric systems modeling of buildings and their environment for performance-based and strategic design
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.641-650
doi	https://doi.org/10.52842/conf.ecaade.2010.641
wos	WOS:000340629400069
summary	The paper proposes Parametric Systems Modeling (PSM) as a tool for building and city planning. The outlined method is based on the Systems Modeling Language (SysML) and is intended for design, dimensioning, and optimization of buildings and cities as systems. The approach exceeds the geometric approach, considers additional information from physics, technology, as well as biology, and provides a basis for multidisciplinary analyses and simulations. Its application aims at the exploration of innovative sustainable design solutions at system level. The proposal of an innovative buildinggreenhouse-city system serves to illustrate the approach. Features of this system are closed water cycles, renewable energy use, thermo-chemical energy storage and transport of energy for heating and cooling purposes on the base of desiccants, as well as recycling of CO2 , accumulation of biomass and related soil improvement.
keywords	Parametric systems modeling; Systems design and engineering; Sustainable city system; City-integrated greenhouse
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ijac20108205
id	ijac20108205
authors	Holzer, Dominik
year	2010
title	Optioneering in Collaborative Design Practice
source	International Journal of Architectural Computing vol. 8 - no. 2, 165-182
summary	The discourse about computational support of collaborative architectural design has in recent years mainly focused on the topic of Building Information Modeling (BIM). In this paper, the method of ‘optioneering’ is presented that, in contrast to current BIM capabilities, assists designers and consultants to resolve design problems through integrated analyses across disciplines in the early stages of design. Although the method of ‘optioneering’ has only recently been adapted in building practice, it has been preceded by manifold efforts by researchers in the field of design and computation over the past two decades.At the end of this paper the computational framework ‘DesignLink’ will be discussed.‘DesignLink’ supports ‘optioneering’ in the design stages before BIM becomes effective and it is currently being developed and used to support performance optimisation of building projects in practice.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2010_097
id	ecaade2010_097
authors	Kontovourkis, Odysseas
year	2010
title	Computer-Generated Circulation Diagrams in Macro-Scale Design Investigation
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.623-632
doi	https://doi.org/10.52842/conf.ecaade.2010.623
wos	WOS:000340629400067
summary	This paper demonstrates an ongoing research investigation, which is the continuation of the author’s doctoral research on a computer-based design approach that is used for the generation of circulation diagrams, and the spatial organization of functional areas in macro-scale design level. The paper introduces a computer program that is based on the idea of particle behavior modeling. The program simulates the human movement behavior in real time and in parallel, based on simple rules of interaction between particles. The model is called a ‘virtual force’ model, since the interaction between particles, and hence human movement behavior modeling, is achieved by using various forces that are acting upon each particle. Any changes on the rules of interaction can produce different results, allowing architects to investigate various design possibilities and study the human movement behavior in different design case studies. In this paper the idea of modeling such movement behavior is investigated and developed further, in order for it to be used for the design of circulation systems, and to suggest solutions to problems that occur in public areas of cities.
keywords	Circulation diagrams; Human movement behavior; Macro-scale design
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2010_222
id	ecaade2010_222
authors	Matcha, Heike; Ljubas, Ante
year	2010
title	Parametric Origami: Adaptable temporary buildings
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.243-251
doi	https://doi.org/10.52842/conf.ecaade.2010.243
wos	WOS:000340629400026
summary	We employ the possibilities of parametric modeling software andcustomized mass production machinery to develop a design for adaptablemultifunctional temporary medium size buildings made from recyclable lightweight materials and built a prototype from cardboard. We developed agrasshopper script that controls the geometry of a self-supporting arc made from a folded plane. The project is conducted as an experimental design-and-build university course that familiarizes students with parametric thinking and designing and with carrying out a project from initial concepts through tobuilding a 1:1 prototype. This project is part of an ongoing series of investigative design & build courses integrating current design possibilities and construction methods.
keywords	Parametric design; Grasshopper script; Temporary low-cost buildings; Student design build projects; CAAM methods
series	eCAADe
email
last changed	2022/06/07 07:59

_id	sigradi2010_222
id	sigradi2010_222
authors	Muslimin, Rizal
year	2010
title	Parametric Fabrication for Traditional Ceramics: A Dialectical Integration of Traditional and CAD;CAM Methods in Computational Design
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 222-228
summary	This paper integrates traditional techniques with the parametric approach in ceramic fabrication by outlining several key parameters in both the traditional and digital ceramic fabrication process, and investigating how these parameters can accommodate parametric variation from the digital model. Findings from three experiments with different parameters suggest a promising landscape for traditional ceramic fabrication to be more compatible, not only with the parametric variation in digital modeling, but also with customized digital fabrication.
keywords	ceramics, traditional, fabrication, parametric, shape grammar
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	ijac20108306
id	ijac20108306
authors	Peters, Brady
year	2010
title	Acoustic Performance as a Design Driver: Sound Simulation and Parametric Modeling using SmartGeometry
source	International Journal of Architectural Computing vol. 8 - no. 3, pp. 337-358
summary	Acoustic performance is an inevitable part of architectural design. Our sonic experience is modified by the geometry and material choices of the designer. Acoustic performance must be understood both on the level of material performance and also at the level of the entire composition. With new parametric and scripting tools performance driven design is possible. Parametric design and scripting tools can be used to explore not only singular objectives, but gradient conditions. Acoustic performance is often thought of in terms of singular performance criteria. This research suggested acoustic design can be understood in terms of gradients and multiple performance parameters. Simulation and modeling techniques for computational acoustic prediction now allow architects to more fully engage with the phenomenon of sound and digital models can be studied to produce data, visualizations, animations, and auralizations of acoustic performance. SmartGeometry has promoted design methods and educational potentials of a performance-driven approach to architectural design through parametric modeling and scripting. The SmartGeometry workshops have provided links between engineering and architecture, analysis and design; they have provided parametric and scripting tools that can provide both a common platform, links between platforms, but importantly an intellectual platform where these ideas can mix. These workshops and conferences have inspired two projects that both used acoustic performance as a design driver. The Smithsonian Institution Courtyard Enclosure and the Manufacturing Parametric Acoustic Surfaces (MPAS) installation at SmartGeometry 2010 are presented as examples of projects that used sound simulation parametric modeling to create acoustically performance driven architecture.
series	journal
last changed	2019/05/24 09:55

_id	acadia10_227
id	acadia10_227
authors	Salim, Flora Dilys; Mulder, Hugo; Jaworski, Przemyslaw
year	2010
title	Demonstration of an Open Platform for Tangible and Social Interactions with Responsive Models
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 227-233
doi	https://doi.org/10.52842/conf.acadia.2010.227
summary	Information is ubiquitous due to the digitization of our world. There is an unprecedented volume of information in our physical and socially networked world that can be used to inform our design problems and the way we design. To date, designers of parametric models have been using design precedents, archived data, and simulated datasets to inform their modeling process, but live information sources from the environment are rarely considered as direct input to models. The paper discusses novel experiments in which digital parametric design models are extended with live input and parameters from physical environments and online social networks. The paper also presents UbiMash, an open source software platform that was introduced and refined during the dev elopment of these experiments.
keywords	parametric design, responsive architecture, open source, design collaboration
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	sigradi2010_35
id	sigradi2010_35
authors	Shadkhou, Shaghayegh; Bignon Jean - claude
year	2010
title	Geometry, Design and Construction: A Parametric Model for Non - standard Timber Construction
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 35-38
summary	Architectural design is confronted with a renewal of formal vocabulary regarding the advancements in computational techniques. Recent advancements in digital representation and geometric description of architectural form are raising more and more questions concerning materialization. Construction and assembling constraints are parts of the data needed to rationalize a geometric model. This paper offers a report on part of a research project aimed at elaborating a tool capable of transforming geometric descriptions of non - standard forms to constructive geometry.
keywords	digital fabrication, materialization, parametric modeling, timber construction, digital design tool
series	SIGRADI
email
last changed	2016/03/10 10:00

_id	ecaade2010_133
id	ecaade2010_133
authors	Shadkhou, Shaghayegh; Bignon, Jean-Claude
year	2010
title	Proposition of a Parametric Model for Non Standard Timber Construction
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.395-402
doi	https://doi.org/10.52842/conf.ecaade.2010.395
wos	WOS:000340629400042
summary	Architectural design is confronted to a renewal of formal vocabulary regarding the advancements on computational techniques. Recent advancements in digital representation and geometric description of architectural form are raising more and more questions in regard to materialization. Construction and assembling constraints are parts of data needed to rationalize a geometric model. This paper reports on part of a research activity aiming at elaborating a tool capable of transforming geometric description of a non-standard form to constructive geometry.
keywords	Digital fabrication; Materialization; Parametric modeling; Timber construction; Digital design tool
series	eCAADe
email
last changed	2022/06/07 07:59

_id	cf2011_p060
id	cf2011_p060
authors	Sheward, Hugo; Eastman Charles
year	2011
title	Preliminary Concept Design (PCD) Tools for Laboratory Buildings, Automated Design Optimization and Assessment Embedded in Building Information Modeling (BIM) Tools.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 451-476.
summary	The design of laboratory buildings entails the implementation of a variety of design constraints such as building codes; design guidelines and technical requirements. The application of these requires from designers the derivation of data not explicitly available at early stages of design, at the same time there is no precise methodology to control the consistency, and accuracy of their application. Many of these constraints deal with providing secure environmental conditions for the activities inside laboratories and their repercussions both for the building occupants and population in general, these constraints mandate a strict control over the building‚Äôs Mechanical Equipment (MEP), in particular the Heating Ventilating and Air Conditioning (HVAC) system. Due to the importance of these laboratory designers are expected to assess their designs not only according spatial relationships, but also design variables such as HVAC efficiency, air pressure hierarchies, operational costs, and the possible implications of their design decisions in the biological safety of the facility. At this point in time, there are no practical methods for making these assessments, without having constant interaction with HVAC specialists. The assessment of laboratory design variables, particularly those technical in nature, such as dimensioning of ducts or energy consumption are usually performed at late stages of design. They are performed by domain experts using data manually extracted from design information, with the addition of domain specific knowledge, the evaluation is done mostly through manual calculations or building simulations. In traditional practices most expert evaluations are performed once the architectural design have been completed, the turn around of the evaluation might take hours or days depending on the methods used by the engineer, therefore reducing the possibility for design alternatives evaluation. The results of these evaluations will give clues about sizing of the HVAC equipment, and might generate the need for design reformulations, causing higher development costs and time delays. Several efforts in the development of computational tools for automated design evaluation such as wheel chair accessibility (Han, Law, Latombe, Kunz, 2002) security and circulation (Eastman, 2009), and construction codes (ww.Corenet.gov.sg) have demonstrated the capabilities of rule or parameter based building assessment; several computer applications capable of supporting HVAC engineers in system designing for late concept or design development exist, but little has been done to assess the capabilities of computer applications to support laboratory design during architectural Preliminary Concept Design(PCD) (Trcka, Hensen, 2010). Developments in CAD technologies such as Building Information Modeling (BIM) have opened doors to formal explorations in generative design using rule based or parametric modeling [7]. BIM represents buildings as a collection of objects with their own geometry, attributes, and relations. BIM also allows for the definition of objects parametrically including their relation to other model objects. BIM has enabled the development of automated rule based building evaluation (Eastman, 2009). Most of contemporary BIM applications contemplate in their default user interfaces access to design constraints and object attribute manipulations. Some even allow for the application of rules over these. Such capabilities make BIM viable platforms for automation of design data derivation and for the implementation of generative based design assessment. In this paper we analyze the possibilities provided by contemporary BIM for implementing generative based design assessment in laboratory buildings. In this schema, domain specific knowledge is embedded in to the BIM system as to make explicit design metrics that can help designers and engineers to assess the performance of design alternatives. The implementation of generative design assessments during PCD can help designers and engineers to identify design issues early in the process, reducing the number of revisions and reconfigurations in later stages of design. And generally improving design performance.
keywords	Heating ventilating and Air Conditioning (HVAC), Building Information Models (BIM), Generative Design Assessment
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ascaad2010_261
id	ascaad2010_261
authors	Steinø, Nicolai
year	2010
title	Parametric Thinking in Urban Design
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 261-270
summary	The paper states that most applications of parametric modeling to architecture and urban design fall into one of two strands of either form for form’s sake, or the negotiation of environmental concerns, while approaches which allow scenarios to be easily tested and modified without the application of complex and expensive technologies are mostly absent, although they seem appropriate in urban design. A survey of existing approaches confirms the statement, and an example of the application of basic knowledge of geometry and parametric thinking to urban design forms the argument of the paper. The pros and cons of this simple approach is discussed, and the paper concludes, that while it does not represent a suitable solution in all cases, it fills a gap among the existing approaches to parametric urban design.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	caadria2011_007
id	caadria2011_007
authors	Ko, Kaon and Salvator-John Liotta
year	2011
title	Digital tea house: Japanese tea ceremony as a pretext for exploring parametric design and digital fabrication in architectural education
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 71-80
doi	https://doi.org/10.52842/conf.caadria.2011.071
summary	This paper reviews the Digital Tea House, a joint workshop in August of 2010 held at the University of Tokyo, Department of Architecture, together with Columbia University GSAPP. Three pavilions for hosting ceremony were designed and built in less than one month, in an attempt to bridge technology and culture not only through design but also fabrication. Issues addressed in the process included applications of computational design, interpretations of tradition and culture in spatial or activity oriented expressions, structural stability, to practical solutions for quick physical materialization. Three teams comprised of 6 to 8 students, each a blend of different nationalities, ultimately produced 3 full-scale tea houses with the same software, primary material, budget, and principal fabrication method.
keywords	Digital fabrication; academic workshop; computational design; design-build; tea house
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	caadria2020_023
id	caadria2020_023
authors	Liu, Chenjun
year	2020
title	Double Loops Parametric Design of Surface Steel Structure Based on Performance and Fabrication
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 23-33
doi	https://doi.org/10.52842/conf.caadria.2020.1.023
summary	In intelligent epoch, automatic parameter design systems reduce the requirements of the skills needed to create objects. The creator only needs to select the most perceptual primitive form to automatically generate the data system that iterates to the most efficient solution. In this paper, a method of combining performance driven optimization with parametric design is proposed. The iterative evolution is under the control of performance loop and fabrication loop, which makes all the data provided by parametric design in a practical project available for exploring structural analysis and digital prefabrication. Related to the case of surface steel structure, parametric optimization is not limited to a set of shape types or design problems, it would be based on the generality and built-in characteristics of parametric modelling environment in the most convenient and flexible way. (Rolvink et al. 2010)And the given parameters would be fed back on geometric structure, performance indicators, and design variables, so that designers can easily and effectively coordinate and try different solutions. The system transforms the generated data into machine language so that the process including design, analysis, manufacturing, and construction can maintain the orthogonal persistence of the data.
keywords	parametric design; component prefabrication; curved steel structure; performance driven
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ascaad2010_075
id	ascaad2010_075
authors	Schubert, Gerhard; Kaufmann Stefan and Petzold Frank
year	2010
title	Project Wave 0.18
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 75-88
summary	In recent years a number of projects have been emerged, in which the new possibilities of the computer as a design tool, have been used. Through the digital chain from design to manufacturing the efficiency has increased and allows the implementation of complex architectural structures. With all these new opportunities, also new challenges arise in the teaching and the educational concepts. The paper describes the detailed course concept and the didactic strategy using the example of a parametric designed roof structure, we designed, planed and build up in scale 1:1 within the main course. „Wendepunkt\|e im Bauen“ (Turning point\|s of building) is the name of an exhibition at the “Pinakothek der Moderne” in Spring 2010. In addition to contributions of the industrialization in the building industry from 1850 to the present day, the exhibition also serves as a platform, to demonstrate new possibilities of computer-aided parametric design and the closely related computer aided manufacturing (CAM). In this context, we took the chance to build a sculpture in Scale 1:1 to show the potential of a constant digital workflow and the digital fabrication. Through the digital chain from design to manufacturing, the efficiency has been increased by the computer and allows the implementation of new complex architectural structures. But the efficiency of the high-degree-automation through the use of computerized machines usually ends in the production of the components. Because this coincidence of the elements in the assembly often proves cost and time, the aim of the project was to optimize both, the production of components and their assembly as well. As part of the wintercourse 2009/2010 different aspects of automation have been reviewed and new solutions have been analyzed. Together with 15 students of the Faculty of Architecture the complete digital chain started with the first design ideas, about parametric programming through production and assembly had been researched, implemented and brought to reality. In the first steps, the students had to learn about the potential, but also about the problems coming with the digital-design and the attached digital-production. There for the course took part at our computerlab. In weekly workshops, all ideas have been implemented and tested directly in the 3-dimensional parametric model. And thanks to the interdisciplinary work with the Department of Structural Design also static factors had been considered, to optimize the form. Parallel to the digital form-finding process, the first prototypes have been produced by the students. By using the chairs 3D-CNC-Mills we were able to check the programmed connection detail in reality and apply the so learned lessons to the further development. After nearly 3 month of research, designing, planning and programming, we were able to produce the over 1000 different parts in only 4 days. By developing a special pre-stressed structure and connection detail it was also possible, to assemble the whole structure (13.5m x 4.5m x 4m) in only one day. The close connection between digital design (CAD) and digital manufacturing (CAM) is an important point of our doctrine. By the fact, that the students operate the machines themselves, but also implement projects on a scale of 1:1, they learn to independently evaluate these new tools and to use them in a meaningful way.
series	ASCAAD
email
last changed	2011/03/01 07:36

For more results click below: