Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 432

Reformat results as: short short into frame detailed detailed into frame

_id	cf2011_p060
id	cf2011_p060
authors	Sheward, Hugo; Eastman Charles
year	2011
title	Preliminary Concept Design (PCD) Tools for Laboratory Buildings, Automated Design Optimization and Assessment Embedded in Building Information Modeling (BIM) Tools.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 451-476.
summary	The design of laboratory buildings entails the implementation of a variety of design constraints such as building codes; design guidelines and technical requirements. The application of these requires from designers the derivation of data not explicitly available at early stages of design, at the same time there is no precise methodology to control the consistency, and accuracy of their application. Many of these constraints deal with providing secure environmental conditions for the activities inside laboratories and their repercussions both for the building occupants and population in general, these constraints mandate a strict control over the building‚Äôs Mechanical Equipment (MEP), in particular the Heating Ventilating and Air Conditioning (HVAC) system. Due to the importance of these laboratory designers are expected to assess their designs not only according spatial relationships, but also design variables such as HVAC efficiency, air pressure hierarchies, operational costs, and the possible implications of their design decisions in the biological safety of the facility. At this point in time, there are no practical methods for making these assessments, without having constant interaction with HVAC specialists. The assessment of laboratory design variables, particularly those technical in nature, such as dimensioning of ducts or energy consumption are usually performed at late stages of design. They are performed by domain experts using data manually extracted from design information, with the addition of domain specific knowledge, the evaluation is done mostly through manual calculations or building simulations. In traditional practices most expert evaluations are performed once the architectural design have been completed, the turn around of the evaluation might take hours or days depending on the methods used by the engineer, therefore reducing the possibility for design alternatives evaluation. The results of these evaluations will give clues about sizing of the HVAC equipment, and might generate the need for design reformulations, causing higher development costs and time delays. Several efforts in the development of computational tools for automated design evaluation such as wheel chair accessibility (Han, Law, Latombe, Kunz, 2002) security and circulation (Eastman, 2009), and construction codes (ww.Corenet.gov.sg) have demonstrated the capabilities of rule or parameter based building assessment; several computer applications capable of supporting HVAC engineers in system designing for late concept or design development exist, but little has been done to assess the capabilities of computer applications to support laboratory design during architectural Preliminary Concept Design(PCD) (Trcka, Hensen, 2010). Developments in CAD technologies such as Building Information Modeling (BIM) have opened doors to formal explorations in generative design using rule based or parametric modeling [7]. BIM represents buildings as a collection of objects with their own geometry, attributes, and relations. BIM also allows for the definition of objects parametrically including their relation to other model objects. BIM has enabled the development of automated rule based building evaluation (Eastman, 2009). Most of contemporary BIM applications contemplate in their default user interfaces access to design constraints and object attribute manipulations. Some even allow for the application of rules over these. Such capabilities make BIM viable platforms for automation of design data derivation and for the implementation of generative based design assessment. In this paper we analyze the possibilities provided by contemporary BIM for implementing generative based design assessment in laboratory buildings. In this schema, domain specific knowledge is embedded in to the BIM system as to make explicit design metrics that can help designers and engineers to assess the performance of design alternatives. The implementation of generative design assessments during PCD can help designers and engineers to identify design issues early in the process, reducing the number of revisions and reconfigurations in later stages of design. And generally improving design performance.
keywords	Heating ventilating and Air Conditioning (HVAC), Building Information Models (BIM), Generative Design Assessment
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ijac20108403
id	ijac20108403
authors	Aksamija, Ajla; Ivanka Iordanova
year	2010
title	Computational Environments with Multimodal Representations of Architectural Design Knowledge
source	International Journal of Architectural Computing vol. 8 - no. 4, p. 439
summary	This article discusses interaction between multimodal representations of architectural design knowledge, particularly focusing on relating explicit and implicit types of information. The aim of the presented research is to develop a computational environment that combines several modes of representation, including and integrating different forms of architectural design knowledge. Development of an interactive digital-models library and ontological model of architectural design factors are discussed, which are complementary in nature. In a time when BIM software is seen as embodiment of domain knowledge and the future medium of architectural design, this paper presents an interaction between ontological representation of architectural design knowledge and its embodiment in interactive models, thus focusing on the process of design and design space exploration. In the digital environments that we propose, representation of different formats of knowledge, such as visual, linguistic or numeric, are integrated with relational and procedural information, design rules, and characteristics. Interactive search and query based on contextual constraints, and parametric variation of the model based on the information received from ontology are the underlying drivers for design exploration and development.
series	journal
last changed	2019/05/24 09:55

_id	caadria2011_052
id	caadria2011_052
authors	Al-Kazzaz, Dhuha A. and Alan Bridges
year	2011
title	Assessing innovation in hybrid designs using shape grammars
doi	https://doi.org/10.52842/conf.caadria.2011.545
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 545-554
summary	Al-kazzaz et al (2010) described hybrid adaption technique to generate innovative designs from heterogeneous precedents using shape grammars. An evaluation of the degree of innovation in the hybrid designs gave feedback to grammar users before and after applying a rule. Innovation was assessed using variables derived from the internal structure of the grammar such as: the number of antecedents in the corpus having the same rule; the number of rules in a subclass rule set having the same geometry; etc. However, the validity of the innovation assessment was unclear and the use of the feedback measures was not demonstrated. Accordingly, this study aims to verify the credibility of the innovation measures and to identify the independent variables that a user can control to achieve a significant impact on each innovation measure as a dependent variable.
keywords	Shape grammars; hybrid design; innovation assessment
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2010_022
id	caadria2010_022
authors	Ambrose, Michael A. and Lisa Lacharité-Lostritto
year	2010
title	Representation in a time of re-presentation: design media processes in architectural education
doi	https://doi.org/10.52842/conf.caadria.2010.229
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 229-238
summary	This paper examines what is appropriate and valuable to include in architectural education in light of changing representational conventions and techniques. Architecture finds itself at a unique moment in time where the means of production for the profession, and indeed the entire discipline, are transforming and fundamentally undermine the existing models of education, production and understanding. The threat to architecture education is that architecture becomes learned techniques rather than a way of operating within a body of knowledge that grows and responds to its context. These digital media processes offer contemporary education new and challenging ways to communicate ideas, sometimes subverting the imperative for “drawing” as the representation does not refer to information in the abstract, but IS the information quite literally.
keywords	Design education; design theory; digital design representation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2010_005
id	caadria2010_005
authors	Anay, Hakan
year	2010
title	Computational aspects of a design process: Mario Botta’s single-family house in Breganzona
doi	https://doi.org/10.52842/conf.caadria.2010.049
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 49-58
summary	The present study aims to foreground and investigate computational aspects of the design process of Mario Botta’s single-family house in Breganzona. Through the selected case, it mainly addresses the research question, “what are the computational aspects of the examined design process and what is the nature of such aspects?” or, otherwise formulated, “what aspects of such a design process could be formalised, and thus, represented or explained in computational terms?” The study primarily involves analysis and investigation of the “material”; the sketches and the drawings produced during the design process and through this material, reinterpretation, and hypothetical reconstruction of the process. The material is taken as the container of design ideas / concepts and operations, and a formal / conceptual analysis is employed to foreground and extract this content.
keywords	Design process; design analysis; design computation; design knowledge
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2010_320
id	sigradi2010_320
authors	Ariel, Moreira Alejandro
year	2010
title	Modelos digitales de representación de lo real como estrategia de management alternativo en la práctica profesional arquitectónica [Digital models of representation of reality as an alternative management strategy in architectural practice]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 320-323
summary	An architectural project is designed in weeks or months—sometimes in places far from the construction site—and is built in years. The challenge of design is more than creating a three - dimensional digital (3D) model that includes all available information; visualization and communication throughout the entire process is crucial due to the global nature of contemporary architectural practice. This study asks: What tool would satisfy this need for communication? The objective of this paper is to explore these issues and propose an answer to this query based on flexible management to solve them.
keywords	technological integration, BIM, IPD, knowledge management, digital model of reality
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2010_298
id	sigradi2010_298
authors	Barcellos, Góes Mariza; David Maria Manuela
year	2010
title	Visualization: The Contribution of a Mathematical Mediating Artefact for Creative Processes and Design Activities
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 298-300
summary	Considering mathematical knowledge as an artefact that mediates social activities in the world, this paper emphasizes the contribution of visual thinking to mathematics education and extends it to the learning of design activities, especially in architectural contexts. Results from a previous research paper on architectural design, which focused on the work of some contemporary architects in their day - to - day office activities, showed the relevance of drawing in architectural practice. These results aroused our interest in researching the mediating role of drawing and its structuring effects on creative processes and design activities in architecture.
keywords	visualization, mathematics education, architectural design education, activity theory
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2010_215
id	ecaade2010_215
authors	Barczik, Guenter
year	2010
title	Uneasy Coincidence? Massive Urbanization and New Exotic Geometries with Algebraic Geometry as an Extreme Example
doi	https://doi.org/10.52842/conf.ecaade.2010.217
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.217-226
summary	We investigate the recent coincidence of rapid global urbanization and unprecedented formal freedom in architectural design and ask whether this coincidence is an uneasy one. To study an extreme case of the new exotic geometries made possible through CAAD, we employ algebraic surfaces to experimentally design architecture in an university-based research and experimental design project. Such surfaces exhibit unprecedented complexity and new geometric and topological features yet are highly sound and harmonious. We continue and extend our research presented at the eCAADe 2009 conference in Istanbul.
wos	WOS:000340629400023
keywords	Algebraic geometry; Shape; Sculpture; design; Tool; Experiment; Methodology; Software
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cf2011_p135
id	cf2011_p135
authors	Chen Rui, Irene; Schnabel Marc Aurel
year	2011
title	Multi-touch - the future of design interaction
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 557-572.
summary	The next major revolution for design is to bring the natural user interaction into design activities. Graphical User Interfaces (GUI) brought a new approach that was more effective compared to their conventional predecessors. In recent years, Natural User Interfaces (NUI) have advanced user experiences and multi-touch and gesture technologies provide new opportunities for a variety of potential uses in design. Much attention has been paid to leverage in the design of interactive interfaces. The mouse input and desktop screen metaphors limit the information sharing for multiple users and also delayed the direct interaction for communication between each other. This paper proposes the innovative method by integrating game engine ‘Unity3D’ with multi-touch tangible interfaces. Unity3D provides a game development tool as part of its application package that has been designed to let users to focus on creating new games. However, it does not limit the usage of area to design additional game scenarios since the benefits of Unity3D is allowing users to build 3D environments with its customizable and easy to use editor, graphical pipelines to openGL (http://unity3d.com/, 2010 ). It creates Virtual Reality (VR) environments which can simulates places in the real world, as well as the virtual environments helping architects and designers to vividly represent their design concepts through 3D visualizations, and interactive media installations in a detailed multi-sensory experience. Stereoscopic displays advanced their spatial ability while solving issues to design e.g. urban spaces. The paper presents how a multi-touch tabletop can be used for these design collaboration and communication tasks. By using natural gestures, designers can now communicate and share their ideas by manipulating the same reference simultaneously using their own input simultaneously. Further studies showed that 3Dl forms are perceived and understood more readily through haptic and proprioceptive perception of tangible representations than through visual representation alone (Gillet et al, 2005). Based on the authors’ framework presented at the last CAADFutures, the benefits of integrating 3D visualization and tactile sensory can be illustrated in this platform (Chen and Wang, 2009), For instance, more than one designer can manipulate the 3D geometry objects on tabletop directly and can communicate successfully their ideas freely without having to waiting for the next person response. It made the work more effective which increases the overall efficiency. Designers can also collect the real-time data by any change they make instantly. The possibilities of Uniy3D make designing very flexible and fun, it is deeply engaging and expressive. Furthermore, the unity3D is revolutionizing the game development industry, its breakthrough development platform for creating highly interactive 3D content on the web (http://unity3d.com/ , 2010) or similar to the interface of modern multimedia devices such as the iPhone, therefore it allows the designers to work remotely in a collaborative way to integrate the design process by using the individual mobile devices while interacting design in a common platform. In design activities, people create an external representation of a domain, often of their own ideas and understanding. This platform helps learners to make their ideas concrete and explicit, and once externalized, subsequently they reflect upon their work how well it sits the real situation. The paper demonstrates how this tabletop innovatively replaces the typical desktop metaphor. In summary, the paper addresses two major issues through samples of collaborative design: firstly presenting aspects of learners’ interactions with physical objects, whereby tangible interfaces enables them constructing expressive representations passively (Marshall, 2007), while focussing on other tasks; and secondly showing how this novel design tool allows designers to actively create constructions that might not be possible with conventional media.
keywords	Multi-touch tabletop, Tangible User Interface
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ijac20108301
id	ijac20108301
authors	Chok, Kermin; Mark Donofrio
year	2010
title	Abstractions for information based design
source	International Journal of Architectural Computing vol. 8 - no. 3, pp. 233-256
summary	This paper discusses how live linkages between parametric geometry, structural analysis and optimization can be leveraged to explore an architectural massing from different perspectives of optimum assuming a set of cost and value characteristics. Broad performance measures such as program area, cladding surface and structural quantities were computed for each geometry variation and collected. Optimums from different perspectives (structure, developer, designer) were extracted for each height category and compared. To further inform and engage stakeholders, a variety of visualization and filtering techniques have been implemented. These new techniques and associated distillation of data aids the design team in understanding the design space. A script based approach towards geometry and data management has led to a shift towards active option evaluation and a more interactive approach to form exploration. A generic workflow for structural analysis, design and optimization has been implemented and this ability to engineer at a greater velocity will move the design profession towards a more collaborative and information based design environment.
series	journal
last changed	2019/05/24 09:55

_id	acadia10_211
id	acadia10_211
authors	Crawford, Scott
year	2010
title	A Breathing Building Skin
doi	https://doi.org/10.52842/conf.acadia.2010.211
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 211-217
summary	This paper details an initial exploration into the development of a breathing building skin. This research proposes a system of diaphragms as an alternative to the use of fans for distributing volumes of air. The driving concepts for this project are the three types of evolutionary adaptation: flexibility, acclimation, and learning. Of particular interest is how these biological concepts relate to architectural design. Parametric modeling was used throughout the project to study a family of folding geometry. This allowed for the iterative development of a complex part that is capable of being manufactured from a single sheet of material. Preliminary calculations point to this system being several times more energy efficient than a fan at moving a given volume of air per Watt of electricity. This research is significant as it puts forth a potentially energy efficient and highly integrated alternative to fans, while also illustrating a way of relating biological concepts of adaptation to architectural design.
keywords	adaptation, responsive, kinetic, ventilation, space frame, parametric
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	sigradi2010_161
id	sigradi2010_161
authors	Dantas, Jorge R.
year	2010
title	The End of Euclidean Geometry or Its Alternate Uses in Computer Design
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 161-164
summary	This paper presents two methods of computer - based architectural design. Computer use requires procedures that enable the achievement of user objectives. However, Computer Aided Design (CAD) has been frequently used as an electronic drawing board.
keywords	architectural computer design, fractal geometry, non - planar projection
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	acadia10_110
id	acadia10_110
authors	Di Raimo; Antonino
year	2010
title	Architecture as Caregiver: Human Body - Information - Cognition
doi	https://doi.org/10.52842/conf.acadia.2010.110
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 110-116
summary	Recent studies in contemporary architecture have developed a variety of parameters regarding the information paradigm which have consequently brought different results and techniques to the process of architectural design. Thus, the emergence of an ecological thinking environment and its involvement in scientific matters has determined links moving beyond the conventional references that rely on information. It is characterized as an interconnected and dynamic interaction, concerning both a theoretical background and providing, at the same time, appropriate means in the architectural design process (Saggio, 2007, 117). The study is based on the assumption that Information Theory leads into a bidirectional model which is based on interaction. According to it, I want to emphasize the presence of the human body in both the architectural creation process and the use of architectural space. The aim of my study, is consequently an evaluation of how this corporeal view related to the human body, can be organized and interlinked in the process of architectural design. My hypothesis relies on the interactive process between the information paradigm and the ecological one. The integration of this corporeal view influences the whole process of architectural design, improving abilities and knowledge (Figure 1). I like to refer to this as a missing ring, as it occurs within a circular vital system with all its elements closely linked to each other and in particular, emphasizes architecture as a living being.
keywords	Architecture, information paradigm, human body, corporeity, cognitive Science, cognition,circularity, living system
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	caadria2010_027
id	caadria2010_027
authors	Fernando, Ruwan; Robin Drogemuller, Flora Dilys Salim and Jane Burry
year	2010
title	Patterns, heuristics for architectural design support: making use of evolutionary modelling in design
doi	https://doi.org/10.52842/conf.caadria.2010.283
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 283-292
summary	Software used by architectural and industrial designers has shifted from becoming a tool for drafting, towards use in verification, simulation, project management and remote project sharing. In more advanced models, design parameters for the designed object can be adjusted so that a family of variations can be produced rapidly. With the advances in computer aided design (CAD) technology, design options can now be generated and analyzed in real time. However the use of digital tools to support design as an activity is still at an early stage and has largely been limited in functionality with regard to the design process. To date, major CAD vendors have not developed an integrated tool that is able to leverage specialised design knowledge from various discipline domains (known as expert knowledge systems) as well as to support the creation of design alternatives that satisfy different forms of constraints. We propose that evolutionary computing and machine learning be linked with parametric design techniques in order to monitor a designer’s cognition and intent based on their design history. This will lead to results that impact future work on design support systems which are capable of supporting implicit constraint and problem definition for wicked problems that are difficult to quantify.
keywords	Design support; heuristics; generative modelling; parametric modelling; evolutionary computation
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ascaad2010_109
id	ascaad2010_109
authors	Hamadah, Qutaibah
year	2010
title	A Computational Medium for the Conceptual Design of Mix-Use Projects
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 109-116
summary	Mix use development is receiving wide attention for its unique sustainable benefits. Nevertheless, the planning and designing of successful mixed use projects in today's environment is a complex matrix of skill sets and necessary collaborations between various stakeholders and design professionals. From a design point of view, architects are required to manage and coordinate large information sets, which are many time at odds with one another. The expansive space of knowledge and information is at its best vague and substantially ill-structured. A situation that continues to overburden architects mental and intellectual ability to understand, address and communicate the design issue. In the face of this complex condition, designers are gravitating towards information modeling to manage and organize the expansive data. However, is becoming increasingly evident that current building information modeling applications are less suited for early design activity due to their interrupted and rigid workflows. Against this background, this paper presents a theoretical framework for a computational medium to support the designer during early phases of exploring and investigating design alternatives for mix-use projects. The focus is on the conjecture between programming and conceptual design phase; when uncertainty and ambiguity as at its maximum, and the absence of computational support continues to be the norm. It must be noted however, the aim of the medium is not to formulate or automate design answers. Rather, to support designers by augmenting and enhancing their ability to interpret, understand, and communicate the diverse and multi-faceted design issue. In literature on interpretation, Hans-Georg Gadamer explains that understanding is contingent on an act of construction. To understand something is to construct it. In light of this explanation. To help designers understand the design issue, is to help them construct it. To this end, the computational medium discussed in this paper is conceived to model (construct) the mix-use architectural program. In effect, turning it into a dynamic and interactive information model in the form of a graph (network). This is an important development because it will enable an entirely new level of interaction between the designer and the design-problem. It will allow the designer to gather, view, query and repurpose the information in novel ways. It will offer the designer a new context to foster knowledge and understanding about the ill-structured and vague design issue. Additionally, the medium would serve well to communicate and share knowledge between the various stakeholders and design professionals. Central to the discussion are two questions: First, how can architects model the design program using a graph? Second, what is the nature of the proposed computational medium; namely, its components and defining properties?
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	ascaad2010_127
id	ascaad2010_127
authors	Hubers, Hans
year	2010
title	Collaborative Parametric BIM
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 127-134
summary	The paper will be focussing on a number of digital design tools used in [our groups credentials]. A new laboratory called […] is developed with Virtual Reality for collaborative architectural design. A brief description of the systems and how they are used to support a design team is given. Synchronic and a-synchronic, local and inter-local communication is made possible. Methods for introducing sustainability in the digital design process and user participation over the Internet will be discussed. The results of the author’s PhD research “Collaborative architectural design in virtual reality” are used to develop a new approach in which team members use their own specific software. Swarm design applications developed in Virtools are used at the start of a project. The objects in the swarm can be urban and architectural functional volumes. Examples of the first are houses, offices, factories, roads and water ways. Examples of the second are working, dining, shopping and waiting spaces. Relations between the functional volumes with or without constraints make the functional volumes swarm to find equilibrium. Everything is dynamic, meaning that relations and functional volumes can change any time. Alternatives can be developed using different values for these parameters and by top-down intervention. When the final global layout has been chosen, using a criteria matrix with sustainability criteria to be judged by all participants, including the future users, a next phase is started amongst professionals using parametric design software. A study into different types of parametric design software makes clear why object parametric software can be used for IFC based BIM, while the more interesting process parametric software can not. To make this clear a pragmatic description of the IFC format is given with a simple example of such a file. Future research will be proposed in which applications of different disciplines are connected through the application programming interfaces, while integrating as much as possible the building information and knowledge in the IFC format.
series	ASCAAD
type	normal paper
email
last changed	2011/03/01 07:48

_id	acadia10_183
id	acadia10_183
authors	Ireland, Tim
year	2010
title	Stigmergic Planning
doi	https://doi.org/10.52842/conf.acadia.2010.183
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 183-189
summary	This paper presents an application of swarm intelligence towards the problem of spatial configuration. The methodology classifies activities as discrete entities, which self-organise topologically through associational parameters: an investigation of emergent route formation and spatial connectivity based on simple agent and pheromone interaction, coupled with the problem of ‘loose’ rectangular geometric assembly. A concept model sniffingSpace (Ireland, 2009) developed in Netlogo (Willensky, 1999), which established the self-organising topological capacity of the system, is extended in Processing (Fry & Rea, 2009) to incorporate rectangular geometry towards the problem of planning architectural space.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:50

_id	acadia10_203
id	acadia10_203
authors	Jaskiewicz, Tomasz
year	2010
title	(In:)forming Interactive Architectural Systems, Case of the xMAiA Meta-model
doi	https://doi.org/10.52842/conf.acadia.2010.203
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 203-210
summary	This paper positions the domain of interactive architecture (iA) and searches for an appropriate model for structure and processing of information in the design and operation of such architecture. It is shown that there are different approaches to ways in which iA system models can be defined, each with numerous advantages and disadvantages. However, due to complexity of encountered problems, application of such models can be only partially validated by simulation and hence their design is inherently dependent on creation of operational and experiential full-scale prototypes of the systems these models represent. Another observation is the lack of correspondence between existing iA models and other contemporary models of computation for architectural geometry, fabrication and engineering. A meta-model for extensible multi-agent interactive architecture (xMAiA) is consequently proposed as a remedy to this situation. xMAiA meta-model is aimed to provide an open framework for integrated evolution, development and operation of interactive architectural systems. It delivers an extensible platform, in which diverse, project-specific models and approaches can be implemented, tested, and further evolved. Such a platform has the potential to empower agile development and operation of interactive architectural ecologies, as well as to substantially facilitate integration of creative design and experiential prototyping from day-1 of project design and development cycle. An example application conforming to the xMAiA meta-model is consequently presented and illustrated with a case study project performed in the university education context.
keywords	multi agent systems, interactive architecture, responsive architecture, design tools
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	ascaad2010_179
id	ascaad2010_179
authors	Jones, Charles; Kevin Sweet
year	2010
title	Over Constrained
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 179-188
summary	Parametric software has fundamentally changed the way in which architecture is conceptualized, developed and even constructed. The ability to assign parameters or numeric variables to specific portions of a project has allowed designers the potential to test variations of their design. Small changes to a single parameter can have an exponential effect on the designed object and alter its appearance beyond original preconceptions in both positive and negative ways. Parametric software also has the ability to constrain or restrict geometry to set values, parameters or conditions. This has the benefit of allowing portions of a form to remain constant or unchanged while simultaneously allowing for a great degree of flexibility in response to a design intent. Constraining portions of a design allows architects to respond to existing or unalterable conditions by ""locking down"" information within a project and then explore those portions that can change more freely. This programmed relationship between the parameter and the form, once established, can give the illusion of minimal effort for maximum output. The ease in which geometrical form can be altered and shaped by a single variable can mislead beginning designers into thinking that the software makes these relationships for them. What is hidden, is the programming or connections needed between the parameters and the geometry in order to produce such dramatic change. Finally, thinking parametrically about design reintroduces the concept of a rigorous, intent driven, fabrication oriented practice; a practice lost in a digital era where the novelty of new tools was sufficient to produce new form. Because parametric models must have established relationships to all parts of the design, each component must have a purpose, be well thought out, and have a direct relationship to a real world object. The introduction of parametric design methodologies into an architectural pedagogy reestablishes architectural praxis in an academic setting. Students are taught to design based on creating relationships to connected components; just as they would do in a professional architectural practice. This paper outlines how Digital Project – a parametric based software – was introduced into an academic setting in an attempt reconnect the ideologies of academia with the practicalities of professional practice. In order to take full advantage of Digital Project as a parameter based software, a project that creates modular, flexible geometries was devised. Produced over one semester, the project set out to find ways of controlling designed geometry through variable parameters that allowed the initial module to be instantiated or replicated into a wall condition: maintaining a unified whole of discrete components. This paper outlines this process, the results and how the outcomes demonstrates the parametric ideologies described above.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	ijac20108104
id	ijac20108104
authors	Kotnik, Toni
year	2010
title	Digital Architectural Design as Exploration of Computable Functions
source	International Journal of Architectural Computing vol. 8 - no. 1, 1-16
summary	In recent decades, new methodologies have emerged in architectural design that exploit the computer as a design tool. This has generated a varied set of digital skills and a new type of architectural knowledge. However, up to now, a theoretical framework is missing that would allow for a comprehensive pedagogical agenda for the teaching of digital design in architecture. The present paper offers an attempt towards such a theoretical grounding based on the concept of computable functions. This approach results in an abstract and formal perspective on digital design that enables a grouping of contemporary digital design methods and an understanding of their logical relationship. On a theoretical level, it opens a path for the study of the mechanism that facilitates the transfer of concepts from various scientific disciplines into architecture.
series	journal
last changed	2019/05/24 09:55

For more results click below: