Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 451

Reformat results as: short short into frame detailed detailed into frame

_id	acadia10_218
id	acadia10_218
authors	Chok, Kermin; Donofrio, Mark
year	2010
title	Structure at the Velocity of Architecture
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 218-226
doi	https://doi.org/10.52842/conf.acadia.2010.218
summary	This paper outlines a digital design workflow, utilized by the authors, which actively links the geometry platforms being utilized by architects with tools for structural analysis, design, form-finding, and optimization. This workflow leads to an accelerated generation and transfer of information to help guide and inform the design process. The engineering team is thus empowered to augment the architect’s design by ensuring that the design team is conscious of the structural implications of design decisions throughout the design process. A crucial element of this design process has been the dynamic linkage of parametric geometry models with structural analysis and design tools. This reduces random errors in model generation and allows more time for critical analysis evaluation. However, the ability to run a multitude of options in a compressed time frame has led to ever increasing data sets. A key component of this structural engineering workflow has become the visualization and rigorous interpretation of the data generated by the analysis process. The authors have explored visualization techniques to distill the complex analysis results into graphics that are easily discernable by all members of the design team.
keywords	Workflows, Structure, Collaboration, Visualizations, Analysis
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	ecaade2010_158
id	ecaade2010_158
authors	Kuo, Jeannette; Zausinger, Dominik
year	2010
title	Scale and Complexity: Multi-layered, multi-scalar agent networks in time-based urban design
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.651-657
doi	https://doi.org/10.52842/conf.ecaade.2010.651
wos	WOS:000340629400070
summary	Urban design, perhaps even more than architecture, is a timedependent discipline. With its multi-layered complexities, from individual buildings to entire regions, decisions made at one level, that may not show effect immediately, may prove to have disastrous consequences further down the line. The need to incorporate time-based simulations in urban modeling, and the demand for a means of evaluating the changes have led to explorations with multi-agent systems in computation that allow for decisions to be decentralized. From the first basic rule-based system of Conway’s Game of Life [1] to recent urban simulations developed at institutions like the ETH Zurich [2], or UCL CASA [3], these programs synthesize the various exigencies into complex simulations so that the designer may make informed decisions. It is however not enough to simply use parametrics in urban design. Rules or desires implemented at one scale may not apply to another, while isolating each scalar layer for independent study reverts to the disjunctive and shortsighted practices of past planning decisions. Central to current parametric research in urban design is the need to deal with multiple scales of urbanism with specific intelligence that can then feed back into the collective system: a networked parametric environment. This paper will present the results from a city-generator, developed in Processing by Dino Rossi, Dominik Zausinger and Jeannette Kuo, using multiagent systems that operate interactively at various scales.
keywords	Agent-based modeling; Cellular automata; Parametric urbanism; Neural network; Complexity; Genetic algorithm; Urban dynamics
series	eCAADe
email
last changed	2022/06/07 07:52

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ijac20108102
id	ijac20108102
authors	Budroni, Angela; Jan Boehm
year	2010
title	Automated 3D Reconstruction of Interiors from Point Clouds
source	International Journal of Architectural Computing vol. 8 - no. 1, 55-73
summary	We present a new technique for the fully automated 3D modelling of indoor environments from a point cloud. The point cloud is acquired with several scans and is afterwards processed in order to segment planar structures, which have a noticeable architectural meaning (floor, ceiling and walls) in the interior. The basic approach to data segmentation is plane sweeping based on a hypothesis-and-test strategy. From the segmentation results, the ground plan is created through cell decomposition by trimming the two-dimensional ground space using half-space primitives. An extension in height of the ground contours makes the generation of the 3D model possible. The so-reconstructed indoor model is saved in CAD format for analysis and further applications or, simply, as a record of the interior geometry.
series	journal
last changed	2019/05/24 09:55

_id	sigradi2010_347
id	sigradi2010_347
authors	de Souza, Santos Taís; Leão de Amorim Arivaldo
year	2010
title	Modelos dinâmicos para visualização arquitetônica e urbana: limites e possibilidades [Dynamic models for urban and architectural visualization: limits and possibilities]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 347-350
summary	In this article we discuss the use of photographic panoramas in the capture of urban space and architecture. The picture is a dynamic and interactive model, which has been used as a tool that assists the apprehension of space, due to its high level of realism. When associated with the virtual tour, this tool is potentialized due to the amount of information that can be added to the application. To illustrate this analysis, two examples were offered at different scales: one aimed at the capture of urban spaces and the second aimed at architectural spaces. In doing so it was possible to compare results and discuss the potential of the tool.
keywords	dynamic models; urban visualization, interactivity, virtual tour, photographic panoramas
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	acadia10_110
id	acadia10_110
authors	Di Raimo; Antonino
year	2010
title	Architecture as Caregiver: Human Body - Information - Cognition
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 110-116
doi	https://doi.org/10.52842/conf.acadia.2010.110
summary	Recent studies in contemporary architecture have developed a variety of parameters regarding the information paradigm which have consequently brought different results and techniques to the process of architectural design. Thus, the emergence of an ecological thinking environment and its involvement in scientific matters has determined links moving beyond the conventional references that rely on information. It is characterized as an interconnected and dynamic interaction, concerning both a theoretical background and providing, at the same time, appropriate means in the architectural design process (Saggio, 2007, 117). The study is based on the assumption that Information Theory leads into a bidirectional model which is based on interaction. According to it, I want to emphasize the presence of the human body in both the architectural creation process and the use of architectural space. The aim of my study, is consequently an evaluation of how this corporeal view related to the human body, can be organized and interlinked in the process of architectural design. My hypothesis relies on the interactive process between the information paradigm and the ecological one. The integration of this corporeal view influences the whole process of architectural design, improving abilities and knowledge (Figure 1). I like to refer to this as a missing ring, as it occurs within a circular vital system with all its elements closely linked to each other and in particular, emphasizes architecture as a living being.
keywords	Architecture, information paradigm, human body, corporeity, cognitive Science, cognition,circularity, living system
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	ascaad2010_109
id	ascaad2010_109
authors	Hamadah, Qutaibah
year	2010
title	A Computational Medium for the Conceptual Design of Mix-Use Projects
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 109-116
summary	Mix use development is receiving wide attention for its unique sustainable benefits. Nevertheless, the planning and designing of successful mixed use projects in today's environment is a complex matrix of skill sets and necessary collaborations between various stakeholders and design professionals. From a design point of view, architects are required to manage and coordinate large information sets, which are many time at odds with one another. The expansive space of knowledge and information is at its best vague and substantially ill-structured. A situation that continues to overburden architects mental and intellectual ability to understand, address and communicate the design issue. In the face of this complex condition, designers are gravitating towards information modeling to manage and organize the expansive data. However, is becoming increasingly evident that current building information modeling applications are less suited for early design activity due to their interrupted and rigid workflows. Against this background, this paper presents a theoretical framework for a computational medium to support the designer during early phases of exploring and investigating design alternatives for mix-use projects. The focus is on the conjecture between programming and conceptual design phase; when uncertainty and ambiguity as at its maximum, and the absence of computational support continues to be the norm. It must be noted however, the aim of the medium is not to formulate or automate design answers. Rather, to support designers by augmenting and enhancing their ability to interpret, understand, and communicate the diverse and multi-faceted design issue. In literature on interpretation, Hans-Georg Gadamer explains that understanding is contingent on an act of construction. To understand something is to construct it. In light of this explanation. To help designers understand the design issue, is to help them construct it. To this end, the computational medium discussed in this paper is conceived to model (construct) the mix-use architectural program. In effect, turning it into a dynamic and interactive information model in the form of a graph (network). This is an important development because it will enable an entirely new level of interaction between the designer and the design-problem. It will allow the designer to gather, view, query and repurpose the information in novel ways. It will offer the designer a new context to foster knowledge and understanding about the ill-structured and vague design issue. Additionally, the medium would serve well to communicate and share knowledge between the various stakeholders and design professionals. Central to the discussion are two questions: First, how can architects model the design program using a graph? Second, what is the nature of the proposed computational medium; namely, its components and defining properties?
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	ecaade2010_090
id	ecaade2010_090
authors	Ladouce, Nicolas; Hee, Limin; Janssen, Patrick T.
year	2010
title	Urban Space Planning for Sustainable High Density Environment
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.777-785
doi	https://doi.org/10.52842/conf.ecaade.2010.777
wos	WOS:000340629400083
summary	In this paper we investigate the possibilities of new typologies of urban public space for high density environments. The premise for the project would be that with new high-density typologies, it would be necessary to consider a difference in the nature of urban public spaces rather than a difference in degree from the status quo. From observations of urban patterns that drive collective, hybrid spaces around Asia, relationships between urban attributes are drawn. For this paper we shall focus on the particular case of Linked Hybrid, Beijing, China, as an elevated urban public space. A literature review focuses on reviewing key theories to construct and adopt a rating system to develop an empirical framework to evaluate the case studies and extract the key attributes. These rated attributes are then abstracted in a real-time model that enables user manipulation. The purpose is to create a tool to better observe the effects and evolution of planning decisions for future urban spaces in high density contexts. The preliminary results are consistent with the idea that selected spatial parameters of a space may be embedded into a “barcode” and referenced as a type. The combination of different types, hence their parameters may be used for effective replication of their characteristics to improve the decision-making process for urban designers. The research is not intended to reproduce the successful urban public spaces but rather result in a catalogue of typologies which can be referred to during the initial stages of planning to provide an indication of spatial qualities.
keywords	High density environments; Collective urban space; Hybrid typologies; Parametric urbanism
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2010_111
id	ecaade2010_111
authors	Morello, Eugenio; Carneiro, Cla_udio; Desthieux, Gilles
year	2010
title	The Use of Digital 3-D Information to Assess Urban Environmental Quality Indicators
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.499-506
doi	https://doi.org/10.52842/conf.ecaade.2010.499
wos	WOS:000340629400054
summary	This paper anticipates the use of 3-D data for the environmental analysis of cities, aiming to provide useful tools for urban designers. The extraction of urban environmental quality (UEQ) indicators from 3-D information using innovative tools is presented. We will introduce our recent research about the implementation of computational tools for the analysis, evaluation and design of the urban space and compare results that can be obtained with different data sources. In particular, we are going to present the advantages of urban models generated from LiDAR data, by showing the case-study analysis of the measurement and quantification of urban vegetation indicators. Results show that the limitation to solar accessibility on roofs is not relevant for the case-study area. Moreover, a set of environmental and morphological indicators could inform urban designers for decision making processes about the distribution of vegetation inside the urban fabric.
keywords	3-D information; Urban environmental quality; 2.5-D digital urban surface model; LiDAR; Digital image processing
series	eCAADe
email
last changed	2022/06/07 07:58

_id	caadria2013_195
id	caadria2013_195
authors	Park, Jihyun; Azizan Aziz, Kevin Li and Carl Covington
year	2013
title	Energy Performance Modeling of an Office Building and Its Evaluation – Post-Occupancy Evaluation and Energy Efficiency of the Building
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 209-218
doi	https://doi.org/10.52842/conf.caadria.2013.209
wos	WOS:000351496100021
summary	Energy performance modelling can provide insights into the efficiency and sustainability of commercial buildings, and also the achievement of certification standards such as USGBC LEED. However, the results from the modelling must be validated via a post-construction evaluation, which quantifies any discrepancies between the predicted energy usage and the actual energy consumed. In this study, an existing office building was examined to test how well the model predicts energy usage. The results from the model were compared with the actual usage of gas and electricity over two years (2010-2011). Our study showed a 123% higher gas usage,and a 36% lower electricity, compared with the simulation. This difference presents that occupant behaviour and building construction practices have significant impact on the energy usage of a building. For instance, the large discrepancy among gas usage is due to the office building’s thermal envelope, which identifies the spots at which heat leaks out of the building, thereby forcing the heating unit to work more. Additionally, the post occupancy evaluation study identified that indoor environmental conditions impact on energy consumption of the building.
keywords	Building performance evaluation, Energy modelling, Energy usage, User behaviour, Post occupancy evaluation
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	ijac20108308
id	ijac20108308
authors	Salim, Flora Dilys; Hugo Mulder, Przemyslaw Jaworski, et al.
year	2010
title	Collaborative Design and Live Interaction with Parametric Models using UbiMash
source	International Journal of Architectural Computing vol. 8 - no. 3, pp. 377-398
summary	Due to the complexity of parametric modeling, it has been the task of only a handful of experts in the design team to develop, build and modify parametric models. The complexity of parametric models increases exponentially with the number of design aspects it incorporates. The ambiguity of parametric models towards the modeled design intent explains that modifying the model is often isolated as an individual exercise. Developments in physical and ubiquitous computing, however, allow for collaboration and interaction with parametric models in other ways. Communication, coordination, and interaction between parametric models and the physical and social environment are the context of this paper. The paper describes some of the projects that were outcomes of the SmartGeometry 2010 workshops. These projects are dealing with mass collaboration using Twitter, tangible interfaces, parametric design and construction coordination and geometrical interpretation of datasets.
keywords	Parametric design, interactive parametric model, design collaboration, physical computing, ambient computing, form fostering, UbiMash, SmartGeometry
series	journal
last changed	2019/05/24 09:55

_id	caadria2010_018
id	caadria2010_018
authors	Schoch, M.; A. Praditsmanont and C. Prakasvudhisarn
year	2010
title	Shaping building volumes through life cycle costs: a constraint programming approach for building volume optimisation
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 185-194
doi	https://doi.org/10.52842/conf.caadria.2010.185
summary	Due to a general freedom in the architectural design process, a wide range of possible alternatives exist; although building-volume designs must also continue to meet numerous, possibly conflicting design requirements originating from various related disciplines. This research addresses problems associated with missing quantitative design aids during the early design stages. It aims to provide designers with solutions that provide optimal cost-effectiveness. The demonstrated building-volume optimisation model minimises life cycle costs by determining optimal-volume dimensions, floor number, building orientation and ‘window / wall’ opening ratios while satisfying site and building code regulations and design constraints. Results indicate an optimal solution can be found within a practical timeframe. The proposed, novel approach to introduce cost objectives into building-volume design provides designers with a valuable decision support tool in a design domain that is known to be complex owing to multiple design criteria and constraint influences.
keywords	Decision support; design optimisation; building volume design; life cycle costs and constraint-based design
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	ecaade2010_069
id	ecaade2010_069
authors	Schoch, Martin; Praditsmanont, Apichat
year	2010
title	Experimenting with Building Footprint Formation and Volume Optimization: A constraint programming approach for the optimization of buildingvolumes based on combinatorial rectangular footprint formations
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.419-427
doi	https://doi.org/10.52842/conf.ecaade.2010.419
wos	WOS:000340629400045
summary	This paper is focusing on integrating footprint formations of buildingvolumes into an existing research of building-volume optimization (BVO). While earlier BVO experiments concentrated on single rectangular floor-area units per floor, the current BVO model allows footprint assemblies of combinatorial rectangular floor-area units per floor. The aspect of using these combinatorial floor assemblies is to provide more flexibility into the shaping of possible building-volumes and thus a more realistic approach to building-volume design. The investigation regarding combinatorial floor-area units concentrated on running time in reference to amount of allowable unit combinations per floor and the ability to provide close to optimal solutions through additional search runs. Results of the experiments documented a sharp increase of running time due to the additional allocation of floor-area units, while the BVO model was improved through the ability to generate combinatory footprint formation and offer close to optimal solutions.
keywords	Decision support; Design optimization; Building-volume design; Life cycle costs; Constraint-based design
series	eCAADe
email
last changed	2022/06/07 07:56

_id	cf2011_p060
id	cf2011_p060
authors	Sheward, Hugo; Eastman Charles
year	2011
title	Preliminary Concept Design (PCD) Tools for Laboratory Buildings, Automated Design Optimization and Assessment Embedded in Building Information Modeling (BIM) Tools.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 451-476.
summary	The design of laboratory buildings entails the implementation of a variety of design constraints such as building codes; design guidelines and technical requirements. The application of these requires from designers the derivation of data not explicitly available at early stages of design, at the same time there is no precise methodology to control the consistency, and accuracy of their application. Many of these constraints deal with providing secure environmental conditions for the activities inside laboratories and their repercussions both for the building occupants and population in general, these constraints mandate a strict control over the building‚Äôs Mechanical Equipment (MEP), in particular the Heating Ventilating and Air Conditioning (HVAC) system. Due to the importance of these laboratory designers are expected to assess their designs not only according spatial relationships, but also design variables such as HVAC efficiency, air pressure hierarchies, operational costs, and the possible implications of their design decisions in the biological safety of the facility. At this point in time, there are no practical methods for making these assessments, without having constant interaction with HVAC specialists. The assessment of laboratory design variables, particularly those technical in nature, such as dimensioning of ducts or energy consumption are usually performed at late stages of design. They are performed by domain experts using data manually extracted from design information, with the addition of domain specific knowledge, the evaluation is done mostly through manual calculations or building simulations. In traditional practices most expert evaluations are performed once the architectural design have been completed, the turn around of the evaluation might take hours or days depending on the methods used by the engineer, therefore reducing the possibility for design alternatives evaluation. The results of these evaluations will give clues about sizing of the HVAC equipment, and might generate the need for design reformulations, causing higher development costs and time delays. Several efforts in the development of computational tools for automated design evaluation such as wheel chair accessibility (Han, Law, Latombe, Kunz, 2002) security and circulation (Eastman, 2009), and construction codes (ww.Corenet.gov.sg) have demonstrated the capabilities of rule or parameter based building assessment; several computer applications capable of supporting HVAC engineers in system designing for late concept or design development exist, but little has been done to assess the capabilities of computer applications to support laboratory design during architectural Preliminary Concept Design(PCD) (Trcka, Hensen, 2010). Developments in CAD technologies such as Building Information Modeling (BIM) have opened doors to formal explorations in generative design using rule based or parametric modeling [7]. BIM represents buildings as a collection of objects with their own geometry, attributes, and relations. BIM also allows for the definition of objects parametrically including their relation to other model objects. BIM has enabled the development of automated rule based building evaluation (Eastman, 2009). Most of contemporary BIM applications contemplate in their default user interfaces access to design constraints and object attribute manipulations. Some even allow for the application of rules over these. Such capabilities make BIM viable platforms for automation of design data derivation and for the implementation of generative based design assessment. In this paper we analyze the possibilities provided by contemporary BIM for implementing generative based design assessment in laboratory buildings. In this schema, domain specific knowledge is embedded in to the BIM system as to make explicit design metrics that can help designers and engineers to assess the performance of design alternatives. The implementation of generative design assessments during PCD can help designers and engineers to identify design issues early in the process, reducing the number of revisions and reconfigurations in later stages of design. And generally improving design performance.
keywords	Heating ventilating and Air Conditioning (HVAC), Building Information Models (BIM), Generative Design Assessment
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2011_220
id	sigradi2011_220
authors	Velandia, Diego
year	2011
title	Modelado digital y diseño paramétrico como opción en la experimentación, desarrollo, visualización y toma de decisiones para estudiantes de arquitectura: Experiencias en un curso electivo [Digital modeling and parametric design]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 436-439
summary	An elective course called architectural visualization and simulation was proposed in 2010. Introduce and integrate digital media into learning processes in architecture was the main objective. Interacting in 3-dimensional with digital models of projects, integrating a lot of information and physical variables in a digital model and parameterize a project to digital modeling were the specific objectives related to the concepts of visualization and simulation. Familiarization with the interface and application of parametric modeling, lighting and mapping in projects of the students were some of the results shown by students at the end of the course.
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	ecaade2010_183
id	ecaade2010_183
authors	Bourdakis, Vassilis
year	2010
title	Designing Interactions: A step forward from time based media and synthetic space design in architectural education
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.151-156
doi	https://doi.org/10.52842/conf.ecaade.2010.151
wos	WOS:000340629400016
summary	The paper follows the development of digital tools for architects and briefly discusses their utility within education and practice. The move from static CAD tools to time based media followed by programmatic processes and virtual environment design is addressing the evolution of the profession and to an extent reflects practitioners’ needs. The paper focuses on the notion of interactivity and how it is been addressed in various fields. Borrowing from computer science and game design the author presents a course dealing with designing interactivity, responsiveness and users feeding their input back in the design. The aim of the paper is to analyse and support a new set of tools in architectural curricula that will implement interactivity and integrate it into spatial design leading to a holistic approach promoting intelligence, hybridity and responsiveness of the built environment. Following, the elaboration of the rationale, a brief discussion on tools and project directions is carried out.
keywords	Interaction; Virtual environments; Time based media; Curriculum; Intelligent environments
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ijac20108204
id	ijac20108204
authors	Jacobus, Frank; Jay McCormack, Josh Hartung
year	2010
title	The Chair Back Experiment: Hierarchical Temporal Memory and the Evolution of Artificial Intelligence in Architecture
source	International Journal of Architectural Computing vol. 8 - no. 2, 151-164
summary	Computational synthesis tools that automatically generate solutions to design problems are not widely used in architectural practice despite many years of research. This deficiency can be attributed, in part, to the difficulty of constructing robust building specific databases. New advances in artificial intelligence such as Hierarchical Temporal Memory (HTM) have the potential to make the construction of these databases more realistic in the near future. Based on an emerging theory of human neurological function, HTMs excel at ambiguous pattern recognition. This paper includes a first experiment using HTMs for learning and recognizing patterns in the form of visual style characteristics in three distinct chair back types. Results from the experiment indicate that HTMs develop a similar storage of quality to humans and are therefore a promising option for capturing multi-modal information in future design automation efforts.
series	journal
last changed	2019/05/24 09:55

_id	caadria2020_023
id	caadria2020_023
authors	Liu, Chenjun
year	2020
title	Double Loops Parametric Design of Surface Steel Structure Based on Performance and Fabrication
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 23-33
doi	https://doi.org/10.52842/conf.caadria.2020.1.023
summary	In intelligent epoch, automatic parameter design systems reduce the requirements of the skills needed to create objects. The creator only needs to select the most perceptual primitive form to automatically generate the data system that iterates to the most efficient solution. In this paper, a method of combining performance driven optimization with parametric design is proposed. The iterative evolution is under the control of performance loop and fabrication loop, which makes all the data provided by parametric design in a practical project available for exploring structural analysis and digital prefabrication. Related to the case of surface steel structure, parametric optimization is not limited to a set of shape types or design problems, it would be based on the generality and built-in characteristics of parametric modelling environment in the most convenient and flexible way. (Rolvink et al. 2010)And the given parameters would be fed back on geometric structure, performance indicators, and design variables, so that designers can easily and effectively coordinate and try different solutions. The system transforms the generated data into machine language so that the process including design, analysis, manufacturing, and construction can maintain the orthogonal persistence of the data.
keywords	parametric design; component prefabrication; curved steel structure; performance driven
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	acadia10_340
id	acadia10_340
authors	Tamke, Martin; Riiber, Jacob; Jungjohann, Hauke
year	2010
title	Generated Lamella
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 340-347
doi	https://doi.org/10.52842/conf.acadia.2010.340
summary	The hierarchical organization of information is dominant in the setup of tectonic structures. In order to overcome the inherent limitations of these systems, self-organization is proposed as a means for future design. The paper exemplifies this within the research project “Lamel la Flock”. The research takes its point of departure in the structural abilities of the wooden Zollinger system: a traditional structural lamella system distributed as a woven pattern of interconnected beams. Where the original system has a very limited set of achievable geometries our research introduces an understanding of beam elements as autonomous entities with sensorymotor behaviour. By this means freeform structures can be achieved Through computation and methods of self-organization, the project investigates how to design and build with a system based on multiple and circular dependencies. Hereby the agent system negotiates between design intent, tectonic needs, and production. The project demonstrates how real-time interactive modeling can be hybridized with agent–based design strategies and how this environment can be linked to physical production. The use of knowledge embedded into the system as well as the flow of information between dynamic processes, Finite Element Calculation and machinery was key for linking the speculative with the physical.
keywords	agent based systems, digital fabrication, aware models, wooden structures, industrial collaboration, 1:1 demonstrator
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	ijac20108403
id	ijac20108403
authors	Aksamija, Ajla; Ivanka Iordanova
year	2010
title	Computational Environments with Multimodal Representations of Architectural Design Knowledge
source	International Journal of Architectural Computing vol. 8 - no. 4, p. 439
summary	This article discusses interaction between multimodal representations of architectural design knowledge, particularly focusing on relating explicit and implicit types of information. The aim of the presented research is to develop a computational environment that combines several modes of representation, including and integrating different forms of architectural design knowledge. Development of an interactive digital-models library and ontological model of architectural design factors are discussed, which are complementary in nature. In a time when BIM software is seen as embodiment of domain knowledge and the future medium of architectural design, this paper presents an interaction between ontological representation of architectural design knowledge and its embodiment in interactive models, thus focusing on the process of design and design space exploration. In the digital environments that we propose, representation of different formats of knowledge, such as visual, linguistic or numeric, are integrated with relational and procedural information, design rules, and characteristics. Interactive search and query based on contextual constraints, and parametric variation of the model based on the information received from ontology are the underlying drivers for design exploration and development.
series	journal
last changed	2019/05/24 09:55

For more results click below: