Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 454

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2010_241
id	ascaad2010_241
authors	Aboreeda, Faten; Dina Taha
year	2010
title	Using Case-Based Reasoning to Aid Sustainable Design
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 241-246
summary	Since so far there exists only one planet, sustainable design is considered the (ethical) future in all fields of design. Although both architecture and construction are being considered major emitters of green house gases, a wise design not only can lead to minimizing this impact but it can also lead to restoring and regenerating the environment to a sustainable state. This paper presents an on-going research that aims at simplifying the elements and facilitating the process of sustainable design by using case-based reasoning. This is achieved through learning from past experiences; both good and bad ones, by providing a database application with a process-friendly interface which divides the main pillars of sustainable design into categories. Each building contains different stories related to different sustainable related issues. Each story can be repeated in /linked to many buildings. By providing designers with those past experiences, it is believed that deeper-studied designs can be more easily developed. Also a deeper analysis and understanding can be further implemented and produced with less effort for experienced and non-experienced architects in sustainable design. This would also decrease the consumption of time during the design process and encourage even more designers to integrate the sustainability concept into more designs. This research discusses the influence of sustainable design within the architectural domain, and suggests a computer application that aids architects during the preliminary design processes.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	ecaade2010_179
id	ecaade2010_179
authors	Fotiadou, Angeliki
year	2010
title	Computing Towards Responsive Architecture: Energy based simulation software for responsive structures
doi	https://doi.org/10.52842/conf.ecaade.2010.507
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.507-513
wos	WOS:000340629400055
summary	The paper has two targets: a theoretical and a practical one which are totally dependant on each other: Its first purpose is to prove based on detailed comparative study by use of competent software apparatus that rotation in a building abiding by strict rules of adaptation to environmental changes (climate, season, time of day, sun duration etc.) should be viewed by modern architecture as a sine-qua-non in terms of energy consumption economy, environmental resources protection, achievement of high standards of living in the city. The aforementioned benefits will be evidenced by means of comparison of responsive structures to traditional ones. The second and most important purpose is to elaborate and provide the fundamental data and information for the creation of a supporting software for the above described model. The two in interaction will result in “revolution” in modern architecture.
keywords	Simulation software; Responsive architecture; Kinetic; Energy consumption
series	eCAADe
email
last changed	2022/06/07 07:51

_id	sigradi2010_294
id	sigradi2010_294
authors	Germen, Murat; Kavlak Emrah
year	2010
title	Future Users, Future Cities: Dwellers as Designers
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 294-297
summary	As technology advances, users become more detached from the way things work and are produced. Users end up being pure consumers and leave their positions as decision makers behind. Before the architectural and building processes were industrialized, most practitioners of so - called vernacular architecture were in fact the inhabitants of what they built, which easily met their specific personal needs because they were in total control of the building process. This paper will focus on the possibility of non - architect users of architecture as decision - makers in order to establish designs that satisfy their individual needs.
keywords	user - driven architecture, architecture without architects, architecture as interface, sustainability, user involvement
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ecaade2010_029
id	ecaade2010_029
authors	Germen, Murat; Kavlak, Emrah
year	2010
title	Future Users, Future Cities: Dweller as Designer
doi	https://doi.org/10.52842/conf.ecaade.2010.057
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.57-64
wos	WOS:000340629400005
summary	As technology advances, users get more detached from the way things work and are produced. Users end up being pure consumers and leave their positions as decision makers behind. Before the architecture and buildings processes were industrialized, most practitioners of the so-called vernacular architecture were in fact the dwellers of what they built and they easily met the specific personal needs since they were in total control. Some “architectural theorists have turned to vernacular construction with the conviction that such buildings and settlements express the interconnectedness between humans and the landscapes they live in.” (Beesley and Bonnemaison 2008). Considering the present day intense building activity, such relationship of dweller and architecture seems not possible excepting a very few examples to later referred to. This paper will instead focus on the possibility of the non-architect users of architectures as decision makers in order to reach designs that meet the requirements of their addressees.
keywords	User driven architecture; Architecture without architects; Architecture as interface; Sustainability; User involvement
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ijac20108204
id	ijac20108204
authors	Jacobus, Frank; Jay McCormack, Josh Hartung
year	2010
title	The Chair Back Experiment: Hierarchical Temporal Memory and the Evolution of Artificial Intelligence in Architecture
source	International Journal of Architectural Computing vol. 8 - no. 2, 151-164
summary	Computational synthesis tools that automatically generate solutions to design problems are not widely used in architectural practice despite many years of research. This deficiency can be attributed, in part, to the difficulty of constructing robust building specific databases. New advances in artificial intelligence such as Hierarchical Temporal Memory (HTM) have the potential to make the construction of these databases more realistic in the near future. Based on an emerging theory of human neurological function, HTMs excel at ambiguous pattern recognition. This paper includes a first experiment using HTMs for learning and recognizing patterns in the form of visual style characteristics in three distinct chair back types. Results from the experiment indicate that HTMs develop a similar storage of quality to humans and are therefore a promising option for capturing multi-modal information in future design automation efforts.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2010_061
id	ecaade2010_061
authors	Mokhtar Noriega, Farid; Gaterman, Harald; Rayoon Alvarez, Enrique
year	2010
title	Collaborative 3D Modelling and Printing: What You See Is Not Directly What You Get
doi	https://doi.org/10.52842/conf.ecaade.2010.031
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.31-40
wos	WOS:000340629400002
summary	The aim of this collaborative 3D printing workshop is to define the production specifications, the teaching-learning pedagogical strategy aspects to help architecture students acquire: the basic competences of building representation, the pre and post processing of printing procedures (printing materials, paint, epoxy, accessories, etc...), defining the missing functions in BIM and Architectural Modelling software and determining the benefits of enhancing them for better 3D prototyping productivity. Two teams (A and B) adopted specific working scenarios based on real world printing jobs. Team A worked on an in-house scenario and Team B on an outsourcing scenario. Tasks successfully completed showed: the wide range of prototypes that could be produced in an architectural studio and the need for a collaborative network to organize the knowledge and good practices developed by research teams (professional or academic) involved in developing rapid prototyping for architecture. This knowledge network could be a discussion forum and a development partnership of 3D printing manufacturers and CAD/BIM software developers.
keywords	Rapid prototyping; Collaborative 3d modelling; Knowledge bases; Software design
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade2010_110
id	ecaade2010_110
authors	Santo, Yasu; Frazer, John Hamilton; Drogemuller, Robin
year	2010
title	Co-Adaptive Environments: Investigation into computer and network enhanced adaptable, sustainable and participatory environments
doi	https://doi.org/10.52842/conf.ecaade.2010.677
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.677-686
wos	WOS:000340629400073
summary	This paper presents research in response to environmental concerns we face today. In a search for a better method to manage spaces and building resources consumed excessively through traditional top-down architectural solutions, the research began by speculating that the building spaces and resources can be managed by designing architectural systems that encourage a bottom-up approach. In other words, this research investigates how to design systems that encourage occupants and users of buildings to actively understand, manage and customise their own spaces. Specific attention is paid to the participation of building users because no matter how sophisticated the system is, the building will become as wasteful as conventional buildings if users cannot, or do not want to, utilise the system effectively. The research is still in its early stages. The intension of this paper is to provide a background to the issue, discuss researches and projects relevant to, but not necessarily about, architecture, and introduce a number of hypothesis and investigations to realise adaptable, participatory and sustainable environments for users.
keywords	Adaptive; Interactive; Participatory; Tangible; Ubiquitous
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2010_000
id	ecaade2010_000
authors	Schmitt, Gerhard; Hovestadt, Ludger; Van Gool, Luc; Bosché, Frédéric; Burkhard, Remo; Colemann, Suzanne; Halatsch, Jan; Hansmeyer, Michael; Konsorski-Lang, Silke; Kunze, Antje; Sehmi-Luck, Martina (eds.)
year	2010
title	FUTURE CITIES
doi	https://doi.org/10.52842/conf.ecaade.2010
source	28th eCAADe Conference Proceedings [ISBN 978-0-9541183-7-2], ETH Zurich (Switzerland) 15-18 September 2010, 904 p.
summary	Future Cities – the title of the 2010 eCAADe Conference describes one of the major challenges of the 21st century. The conference theme is a logical evolution from previous years in that it expands the focus of interest from the building to larger scales and higher complexity. The conference contributions describe methods and instruments that were developed in the last three decades and apply them to city and territorial planning. The eCAADe proceedings demonstrate that CAAD research and education of the past prepared the ground for the future and for the increased responsibility of the CAAD community. The population of cities has developed worldwide from a minority to the majority. Cities are the largest, most complex and most dynamic man-made systems. As vibrant centres of cultural life and of mega events, they are engines that drive local and global economies. However, their growth was in the fewest cases determined by sustainability goals. As a result, contemporary metropolitan territories are often environmentally, socially and economically unsustainable entities placing increasing pressure on the surrounding rural areas. No longer do traditional methods support the planning and managing of large cities – these methods have reached their limits. Parallel to the revolution in the design of buildings, we need a radical re-thinking of the planning, design, development and management process of cities and urban-rural systems. Compared to buildings, urban and rural systems involve a much higher number of stakeholders and decision makers. We need to study and simulate the effects and side effects of urban-rural planning or re-development much earlier in the process than normally done today. The goal seems clear: the transformation of existing and the planning of new sustainable urban-rural systems. As ordering principles we can build on experiences with building architecture. Complexity, dynamics, scale, and the urban metabolism evolve as promising research and education areas.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	acadia10_327
id	acadia10_327
authors	Vassigh, Shahin; Herrera, Silvana
year	2010
title	Interactive Teaching through Simulation Environments
doi	https://doi.org/10.52842/conf.acadia.2010.327
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 327-332
summary	Spurring new and innovative building design will be critical to the urban energy and economic future of the nation. The operation of completed buildings account for 48% of the nation’s annual greenhouse gas emissions, and 76% of all electricity generated by U.S. power plants goes to supply the building sector. Therefore developing and applying new and innovative sustainable building design will have a measurable impact on the environment. Recent studies show sustainable building design is closely linked to system integration, where various components of a building work in confluence to produce synergetic benefits. As a result, a critical component of sustainable design involves a clear understanding of building systems operation, interaction, and the selection parameters. A consideration of suitable building systems, gauging their interaction, and proposing well integrated systems can lead to producing efficient models of sustainable buildings with minimal impact on the environment. The following paper outlines the progress on a project entitled “Building Literacy: the Integration of Building Technology and Design in Architectural Education.” The project develops a digital tool for teaching/learning architectural technology from an integrated systems perspective. The project attempts to immerse students in a simulated environment that is based on the real life practice of architecture. The project accomplishes this by harnessing the capabilities of simulation and dynamic modeling programs, as well as the state of art graphic media, to create compelling and rewarding reasons for students’ engagement in the lear ning process. The project involves a multidisciplinary team of faculty from Florida International University, University at Buffalo the State University of New York, and Iowa State University and is funded by the US Department of Education for the period of 2007-2011.
keywords	educational software, interactive learning, interactive teaching, simulation programs, building performance, building integrated systems,
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:58

_id	ecaade2010_136
id	ecaade2010_136
authors	Yan, Wei
year	2010
title	Teaching Building Information Modeling at Undergraduate and Graduate Levels
doi	https://doi.org/10.52842/conf.ecaade.2010.097
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.97-106
wos	WOS:000340629400010
summary	The paper presents our experience and findings of teaching Building Information Modeling (BIM) at both the undergraduate and graduate levels. At the undergraduate level for Environmental Design students, basic BIM concept and modeling were exercised. At the graduate level for Ph.D. and MS students in Architecture, MArch students, and MS students in Construction Science, advanced topics including parametric design, database, Application Programming Interface (API), and building lifecycle applications of BIM were introduced. We suggest an incremental BIM skill development with a course agenda, for example: first year college – modeling; second year and third year – simulation and analysis for building systems; and fourth year and above until graduate level – customization. Detailed description of the courses, strategies, student projects, findings, and discussions are given in the paper.
keywords	Building information modeling; Education; Undergraduate; Graduate
series	eCAADe
email
last changed	2022/06/07 07:57

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ascaad2010_189
id	ascaad2010_189
authors	Allahaim, Fahad; Anas Alfaris and David Leifer
year	2010
title	Towards Changeability
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 189-200
summary	Many buildings around the world have undergone successive changes over their life cycles. Regardless of the type or size of a building there are usually requirements for change due to several unanticipated forces and emerging uncertainties that act upon them. These changes might be in the building’s spatial, structural or service systems. This can be due to changes in the needs of occupants, the market demand or technological advances. Although buildings undergo change, current design practice does not address this and buildings are still designed as if they will remain static. This paper proposes an Adaptable Buildings Design (ABD) Framework to address the issue of adaptability in building design. Using this methodology uncertainties and future changes are first identified. To increase the building’s longevity, flexibility options are embedded and design rules are formulated to trigger these options when necessary. The value of adaptability is then assessed by implementing several simulations using Real Options Analysis (ROA). To demonstrate the approach, the ABD is applied to a multi-use commercial building case study. Flexibility is embedded in the building’s design across several systems allowing it to change and evolve over time based on a set of design rules. The buildings adaptability is then assessed using ROA. Positive results demonstrate the strength of the proposed methodology in addressing future change and uncertaintie.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	caadria2010_043
id	caadria2010_043
authors	Barker, Tom and M. Hank Haeusler
year	2010
title	Urban digital media: facilitating the intersection between science, the arts and culture in the arena of technology and building
doi	https://doi.org/10.52842/conf.caadria.2010.457
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 457-466
summary	The research presented in this paper investigates ways of providing better design applications for technologies in the field of Urban Digital Media (UDM). The work takes an emergent approach, evolving a design strategy through the early engagement of stakeholders. The paper discusses research in a design-led creative intersection between media technology, culture and the arts in the built environment. The case study discusses opportunities for the enhancement of a university campus experience, learning culture and community, through the provision of an integrated digital presence within campus architecture and urban spaces. It considers types of information architecture (Manovich, 2001) and designs for use in urban settings to create communication-rich, advanced and interactive designed spaces (Haeusler, 2009). The presented research investigates how to create a strategy for display technologies and networked communications to transform and augment the constructed reality of the built environment, allowing new formats of media activity.
keywords	Urban design; outdoor digital media; information architecture; multidisciplinary design; augmented reality; media facades
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia10_263
id	acadia10_263
authors	Beaman, Michael Leighton; Bader, Stefan
year	2010
title	Responsive Shading \| Intelligent Façade Systems
doi	https://doi.org/10.52842/conf.acadia.2010.263
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 263-270
summary	As issues of sustainability gain traction for architects, methodologies for designing, analyzing, and calibrating design solutions have emerged as essential areas of research and development. A number of approaches have been pursued with regard to embedding data into the design process, most fall into one of two approaches to research. The first approach is to mediate environmental impact at the level of applied technology; the second alters building methods and material construction, generating efficient energy use. However, few approaches deal with the crafting of relationships between information and performance on an architectural level. We will examine an approach focused on understanding how crafting relationships between information and design can move architecture towards achieving sustainability. In developing this approach, we created a data-driven design methodology spanning from design inception to construction. Data-driven models, common in the fields of natural science, offer a method to generate and test a multiplicity of responsive solutions. By contextualizing the solutions generated, we were able design though a set of specific and controlled responses rather than as a singular solution. Information utilization requires a new kind of craft that moves beyond instances into relationships and offers performance sensitive issues in design a focused trajectory. We applied this method to the research and development of a responsive shading structure built in conjunction with a thermal testing lab for two test locations – Austin, Texas (Figure. 1 and 2) and Munich, Germany. The following paper chronicles the design and construction at the Texas site over an academic semester.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ijac20108206
id	ijac20108206
authors	Bravo, Germán; Rafael Villazón, Augusto Trujillo, Mauricio Caviedes
year	2010
title	Authoring Tools for KOC - Concepts and Pedagogical Use
source	International Journal of Architectural Computing vol. 8 - no. 2, 183-200
summary	One of the main problems of teachers aiming to teach the construction techniques used in to build a building is the lack of practical examples to show to their students. In order to be useful, these examples must come from real projects or even better the teachers may take their students to constructions sites, but this latter option is not always available and may be dangerous. To deal with this problem, Los Andes University has committed the construction of a knowledge repository containing information gathered from real projects and semantically described, in order to provide easy access to its content and in the language of people of construction. This project is called KOC, standing for Knowledge Objects of Construction, which uses an ontology to describe semantically the data contained in the repository. Being the pedagogical objective of the project, it is important to provide the teachers with additional tools to generate new knowledge objects, based on existing knowledge objects in the repository. This paper presents three composition tools for KOC: a complex objects composer issued from structured searches, a constructive processes composer and a case study composer, all of them aiming the improvement of learning quality in the technical area of building construction at the architecture and engineering schools. The paper also shows some examples of knowledge objects and how KOC is been used in the courses of the Architecture Department of Los Andes.
series	journal
last changed	2019/05/24 09:55

_id	acadia10_145
id	acadia10_145
authors	Briscoe, Danelle
year	2010
title	Information Controlled Erosion
doi	https://doi.org/10.52842/conf.acadia.2010.145
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 145-150
summary	This paper documents research of a design process that interrelates a single information model to 5-axis, waterjet cutting technology. With the intention of creating an optimized design, data is streamed through a building information model that controls geometry parametrically by a component/system relationship. At the scale of a 4’x8’ panel, material properties and pattern variability act as underlying initiators of design rather than post-rational information. In a manner uncommon to the discipline, the information model is being used as a generative tool, rather than as one for mere documentation. The research assigns a limestone wall type to the panel—a material predominantly used in areas where it is indigenous and typically desirable for its texture, color, and thermal properties. The intention is to develop potentialities through material specificity in the information model’s conceptualization. The water-jet process is then used to erode the limestone to achieve varying fields of scalar voids. In addition, the thickness of wall cladding attenuates for figuration and interest. The final stone panels transition from a rain screen system to a solar screen that modulates light, thereby linking environmental intentions to current technological capabilities. The information model is exported for analysis of daylight and structural dynamic qualities and quantities as part of the workflow. Parameters within the information model database facilitate a dimensionally controlled iterative process. Moreover, fabricating with building materials via the information model expedites a design and makes possible for materiality to move beyond merely conceptual representation.
keywords	digital fabrication, information model
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	sigradi2010_244
id	sigradi2010_244
authors	Bunster, Victor
year	2010
title	Between Thermal Efficiency and Formal Expression: Tropism as a Method for Layering Control in Generative Design
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 244-247
summary	The definition of architectonic features often requires negotiation between diverse classes of design conditions merging in particular elements. The use of encompassing concepts opens possible approaches for layering control between these assorted factors. This study presents a method for the implementation of tropism as a conceptual gathering procedure in social housing windows definition, aiming to enhance the relationship between building and context in terms of spatial comfort and formal expression.
keywords	tropism, generative architecture, diffusion limited aggregation, rhetorical structure theory, social housing
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2012_266
id	ecaade2012_266
authors	Casucci, Tommaso ; Erioli, Alessio
year	2012
title	Behavioural Surfaces: Project for the Architecture Faculty library in Florence
doi	https://doi.org/10.52842/conf.ecaade.2012.1.339
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 339-345
wos	WOS:000330322400034
summary	Behavioural Surfaces is a thesis project in Architecture discussed on December 2010 at the University of Florence. The project explores the surfacespace relationship in which a surface condition, generated from intensive datascapes derived from environmental data, is able to produce spatial differentiation and modulate structural and environmental preformance. Exploiting material self-organization in sea sponges as surfaces that deploy function and performance through curvature modulation and space defi nition, two different surface definition processes were explored to organize the system hierarchy and its performances at two different scales. At the macroscale, the global shape of the building is shaped on the base of isopotential surfaces while at a more detailed level the multi-performance skin system is defi ned upon the triply periodic minimal surfaces (TPMS).
keywords	Digital datascape; Isosurfaces; Material intelligence; Minimal sufaces
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2010_184
id	ecaade2010_184
authors	Celani, Gabriela; Medrano, Leandro
year	2010
title	Schemas and Rules in the Design Process: A Case Study
doi	https://doi.org/10.52842/conf.ecaade.2010.305
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.305-312
wos	WOS:000340629400032
summary	The present paper describes the design process of a new prototypical building for the State University of Campinas, with the use of shape schemata and rules. The use of this construct or method made the design process more intelligible for the students who took part in the project and helped managing the team work. We expect that these rules will also allow the automation of the production of design alternatives and construction drawings for new buildings in the campus.
keywords	Design process; Shape grammar; Rules; Schemata; Standard design system
series	eCAADe
email
last changed	2022/06/07 07:55

For more results click below: