Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 435

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2010_025
id	caadria2010_025
authors	Meyboom, Annalisa; Jerzy Wojtowicz and Greg Johnson
year	2010
title	ROBO studio: towards architectronics
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 259-268
doi	https://doi.org/10.52842/conf.caadria.2010.259
summary	Contemporary architecture can be seen as a dynamic system that causes change to its environment, or even as system that can modify itself. Interactive or responsive environments are not totally new to architecture however the possibilities in architecture have only been lightly referred to. This interdisciplinary design studio, with mechatronics engineers and architects collaborating, explored possible applications with real world equipment, sensors and knowledge. Development of responsive architecture requires architects to have a fluency in sensors, actuators and their control system programming. New potential application of technologies requires a re-framing of what that technology could do in a different social application. Together these issues challenged architecture and engineering students in a collaborative design environment. The resulting projects – kinetic architecture on control systems – challenge our understanding of what our built environment could be.
keywords	Architecture; mechatronics; robotics; kinematics; design
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:58

_id	ecaade2010_040
id	ecaade2010_040
authors	Akdag, Suzan Girginkaya; Cagdas, Gulen; Guney, Caner
year	2010
title	Analyzing the Changes of Bosphorus Silhouette
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.815-823
doi	https://doi.org/10.52842/conf.ecaade.2010.815
wos	WOS:000340629400087
summary	Due to improving technology and global competition today sky is the only limit for high towers of metropolitan areas. The increase in number of high rise has been ruining the silhouette of cities all over the world like Istanbul, whose identity and image have also been destroyed by skyscrapers dominating the seven slopes on which it was once built. The urbanization in Istanbul has somehow become homogenous and destructive over the topography. Despite of raising debates on the critical issue now and then, no analytical approach has ever been introduced. The research therefore, aims to analyze the change of Bosphorus silhouette caused by the emergence of high rise blocks in Zincirlikuyu-Maslak route since it was defined as a Central Business District and a high rise development area by Bosphorus Conservation Law in 1991. ArcGIS Desktop software and its analyst extensions are used for mapping, analyzing and evaluating the urban development within years. The application is considered to be the initial step for a decision support system which will assist in assigning ground for high rise buildings in Istanbul.
keywords	GIS; Bosphorus; Silhouette analysis; High rise buildings
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2010_055
id	caadria2010_055
authors	Chen, Zi-Ru; Chung-Yang Wang, Pei-Chien Hung and Yu-Tung Liu
year	2010
title	Preliminary tectonic phenomena of diversified architectural spatial forms in digital age
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 599-608
doi	https://doi.org/10.52842/conf.caadria.2010.599
summary	The research on tectonics in the architectural field began from the middle of nineteenth century and in recent twenty years digital technology gradually developed and permeated through the field of architecture. Liu and Lim (2006, 2009) integrated classic and digital tectonic factors a present framework of new tectonics. However, the previous studies related to the tectonics in this digital age were only on architectural cases that use a great deal of digital media. The research wants to know what and how the tectonic factors affect the different spatial forms of modern architecture and focused on a case study of the diversified spatial forms, orthogonal, folding and curving. The results show the classic tectonic thinking is imperative until now. It is critical to prove the significance of adding the new digital tectonic factors in digital age.
keywords	Digital and classic tectonics; spatial form; digital media
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	62b9
id	62b9
authors	Koutamanis, A.
year	2010
title	Mobile information processing in architecture and building
source	Multi-Science / ISBN 978-1-907132-17-9
summary	This book outlines the applications of mobile devices such as smartphones and PDAs to architecture and building. It offers an overview of the possibilities and limitations of what is likely to become a major development in their field. The book addresses general use issues as well as specifically architectural applications - sketching, CAD, and project management. There is a critical overview of the reasons why one might use mobile devices for each specific purpose; of the possibilities and limitations of these devices; of the skills and facilities required for using them effectively and efficiently; and of the relation between mobile applications and general computerization in architectural practice (in terms of both technology and organisation).
series	book
type	normal paper
email
more	http://www.multi-science.co.uk/mobile-info.htm
last changed	2011/04/21 07:30

_id	ecaade2010_161
id	ecaade2010_161
authors	Pak, Burak; Verbeke, Johan
year	2010
title	Models for Creating the Prospective City: Opportunities and challenges of 4D GIS and virtual environments
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.787-795
doi	https://doi.org/10.52842/conf.ecaade.2010.787
wos	WOS:000340629400084
summary	In this paper, we discuss the different applications of virtual city and environment models within different frameworks and try to reveal their important qualities in relation with their approaches for creating prospective urban developments. Certain uses of urban models and technologies are examined through seven critical cases with a focus on (what) is being modeled, place (where), actors (who), date (when), objectives (why) and approaches (how) adopted for design and development. In the elaboration part, we evaluate and comparatively discuss the interrelated conditions or circumstances that form the setting for these models. In conclusion, a new understanding of Geographical Virtual Environments is reviewed and the critical questions that can determine the future prospects are addressed.
keywords	Urban models; Urban planning and design; GIS; Virtual environments; Simulation
series	eCAADe
email
last changed	2022/06/07 08:00

_id	sigradi2010_138
id	sigradi2010_138
authors	Senagala, Mahesh
year	2010
title	Anachronisms of Digital Fabrication in Architecture: Some Questions of Relevance [Anachronisms of Digital Fabrication in Architecture: Some Questions of Relevance]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 138-141
summary	This paper takes a critical look at some of the anachronisms of digital fabrication (manufacturing) technologies in architectural discipline. The author raises questions of strategy, economy, societal impact, curricula, relevance, scale, innovation and affordability. The author observes that the late adoption and appropriation of digital fabrication technologies in architecture are anachronistic. By bringing these anachronisms to our attention, the paper hopes to enable constructive action to be taken in education, practice and research of digital fabrication technologies in architecture.
keywords	fabrication, criticism, affordability, developing world, BoP
series	SIGRADI
last changed	2016/03/10 10:00

_id	ascaad2021_041
id	ascaad2021_041
authors	Taºdelen, Sümeyye; Leman Gül
year	2021
title	Social Network Analysis of Digital Design Actors: Exploratory Study Covering the Journal Architectural Design
source	Abdelmohsen, S, El-Khouly, T, Mallasi, Z and Bennadji, A (eds.), Architecture in the Age of Disruptive Technologies: Transformations and Challenges [9th ASCAAD Conference Proceedings ISBN 978-1-907349-20-1] Cairo (Egypt) [Virtual Conference] 2-4 March 2021, pp. 280-292
summary	This research asks the question of how the design knowledge production mechanism is processed differentiates digital design actors from each other in the social media/professional and academic fields of architecture. Due to the broad nature of the research question, the study focuses on academia and academia-related media through prominent architect-authors and subject titles in the literature. Bourdieu’s concept of capital is introduced, in which cultural and symbolic capital are considered part of the production values of digital design actors. Digital design actors use image-based social media tools such as Instagram effectively. The paper uses two methods: the first is a bibliographical analysis of author-texts, and the second is a social network analysis. By employing the keyword-based search from the Web of Science database, this study has managed to extract papers with full records (citations, keywords, and abstracts), with the journal Architectural Design having most publications. Considering that both academicians and professionals contribute to publications in Architectural Design, we selected all its publications between 2010-2020 for bibliometric analysis. These analysis techniques include the bibliometric network analyses and social network analysis with the focus on visualizing the algorithms and statistical calculations of well-established metrics. The research reveals the most critical nodes of the bibliometric network by calculating the appropriate central metrics. The network formed by the selected Instagram accounts of digital design actors are shown to be a small-scale network group, while the hashtags of digital design concepts are more numerous than the digital design actors.
series	ASCAAD
email
last changed	2021/08/09 13:11

_id	sigradi2022_112
id	sigradi2022_112
authors	Toledo, Jimena
year	2022
title	The Role of Visual Platforms -visual Social Media- in the Creative Design Process
source	Herrera, PC, Dreifuss-Serrano, C, Gómez, P, Arris-Calderon, LF, Critical Appropriations - Proceedings of the XXVI Conference of the Iberoamerican Society of Digital Graphics (SIGraDi 2022), Universidad Peruana de Ciencias Aplicadas, Lima, 7-11 November 2022 , pp. 639–650
summary	In the current design practice, new digital tools have emerged -visual- also called Infrastructures (Perkel, 2011) such as; Behance 2003, Pinterest 2009, Archdaily 2008, Instagram (2010) -to cite the most recognized in the creative field in Argentina-, which promote different opportunities and support the creative process and problem solving, making it easier for designers to find inspiring material through the Internet. However, very little is known about how these new practices affect professional work, how they themselves see it and the tensions they generate.This article will present the results of a general survey applied to expert designers as part of the first stage of the Doctoral Research project. Which investigates the behavior referred specifically to the use of visual platforms -visual social media- in order to understand, characterize, describe the use and involvement of them within the design process.
keywords	Project processes - Creativity - Design process - Visual Social Media -Curatorial Practice
series	SIGraDi
email
last changed	2023/05/16 16:56

_id	acadia10_327
id	acadia10_327
authors	Vassigh, Shahin; Herrera, Silvana
year	2010
title	Interactive Teaching through Simulation Environments
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 327-332
doi	https://doi.org/10.52842/conf.acadia.2010.327
summary	Spurring new and innovative building design will be critical to the urban energy and economic future of the nation. The operation of completed buildings account for 48% of the nation’s annual greenhouse gas emissions, and 76% of all electricity generated by U.S. power plants goes to supply the building sector. Therefore developing and applying new and innovative sustainable building design will have a measurable impact on the environment. Recent studies show sustainable building design is closely linked to system integration, where various components of a building work in confluence to produce synergetic benefits. As a result, a critical component of sustainable design involves a clear understanding of building systems operation, interaction, and the selection parameters. A consideration of suitable building systems, gauging their interaction, and proposing well integrated systems can lead to producing efficient models of sustainable buildings with minimal impact on the environment. The following paper outlines the progress on a project entitled “Building Literacy: the Integration of Building Technology and Design in Architectural Education.” The project develops a digital tool for teaching/learning architectural technology from an integrated systems perspective. The project attempts to immerse students in a simulated environment that is based on the real life practice of architecture. The project accomplishes this by harnessing the capabilities of simulation and dynamic modeling programs, as well as the state of art graphic media, to create compelling and rewarding reasons for students’ engagement in the lear ning process. The project involves a multidisciplinary team of faculty from Florida International University, University at Buffalo the State University of New York, and Iowa State University and is funded by the US Department of Education for the period of 2007-2011.
keywords	educational software, interactive learning, interactive teaching, simulation programs, building performance, building integrated systems,
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:58

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ascaad2010_241
id	ascaad2010_241
authors	Aboreeda, Faten; Dina Taha
year	2010
title	Using Case-Based Reasoning to Aid Sustainable Design
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 241-246
summary	Since so far there exists only one planet, sustainable design is considered the (ethical) future in all fields of design. Although both architecture and construction are being considered major emitters of green house gases, a wise design not only can lead to minimizing this impact but it can also lead to restoring and regenerating the environment to a sustainable state. This paper presents an on-going research that aims at simplifying the elements and facilitating the process of sustainable design by using case-based reasoning. This is achieved through learning from past experiences; both good and bad ones, by providing a database application with a process-friendly interface which divides the main pillars of sustainable design into categories. Each building contains different stories related to different sustainable related issues. Each story can be repeated in /linked to many buildings. By providing designers with those past experiences, it is believed that deeper-studied designs can be more easily developed. Also a deeper analysis and understanding can be further implemented and produced with less effort for experienced and non-experienced architects in sustainable design. This would also decrease the consumption of time during the design process and encourage even more designers to integrate the sustainability concept into more designs. This research discusses the influence of sustainable design within the architectural domain, and suggests a computer application that aids architects during the preliminary design processes.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	acadia10_263
id	acadia10_263
authors	Beaman, Michael Leighton; Bader, Stefan
year	2010
title	Responsive Shading \| Intelligent Façade Systems
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 263-270
doi	https://doi.org/10.52842/conf.acadia.2010.263
summary	As issues of sustainability gain traction for architects, methodologies for designing, analyzing, and calibrating design solutions have emerged as essential areas of research and development. A number of approaches have been pursued with regard to embedding data into the design process, most fall into one of two approaches to research. The first approach is to mediate environmental impact at the level of applied technology; the second alters building methods and material construction, generating efficient energy use. However, few approaches deal with the crafting of relationships between information and performance on an architectural level. We will examine an approach focused on understanding how crafting relationships between information and design can move architecture towards achieving sustainability. In developing this approach, we created a data-driven design methodology spanning from design inception to construction. Data-driven models, common in the fields of natural science, offer a method to generate and test a multiplicity of responsive solutions. By contextualizing the solutions generated, we were able design though a set of specific and controlled responses rather than as a singular solution. Information utilization requires a new kind of craft that moves beyond instances into relationships and offers performance sensitive issues in design a focused trajectory. We applied this method to the research and development of a responsive shading structure built in conjunction with a thermal testing lab for two test locations – Austin, Texas (Figure. 1 and 2) and Munich, Germany. The following paper chronicles the design and construction at the Texas site over an academic semester.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	caadria2010_031
id	caadria2010_031
authors	Burke, A.; B. Coorey, D. Hill and J. McDermott
year	2010
title	Urban micro-informatics: a test case for high-resolution urban modelling through aggregating public information sources
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 327-336
doi	https://doi.org/10.52842/conf.caadria.2010.327
summary	Our contention is that the city is a rich collection of urban micro-ecologies in continuous formation that include information types outside the traditional boundaries of urban design, city planning, and architecture and their native data fields. This paper discusses working with non-standard urban data types of a highly granular nature, and the analytical possibilities and technical issues associated with their aggregation, through a post professional masters level research studio project run in 2008. Opportunities for novel urban analysis arising from this process are discussed in the context of typical urban planning and analysis systems and locative media practices. This research bought to light specific technical and conceptual issues arising from the combination of processes including sources of data, data collection methods, data formatting, aggregating and visualisation. The range and nature of publicly available information and its value in an urban analysis context is also explored, linking collective information sites such as Pachube, to local environmental analysis and sensor webs. These are discussed in this paper, toward determining the possibilities for novel understandings of the city from a user centric, real-time urban perspective.
keywords	Urban; informatics; processing; ubicomp; visualisation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ascaad2010_065
id	ascaad2010_065
authors	Celani, Gabriela; Jose_ Duarte and Regiane Pupo
year	2010
title	Introducing Digital Fabrication Laboratories in Architecture Schools
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 65-74
summary	The present paper proposes a set of guidelines for the implementation of digital fabrication laboratories for education and research in architecture schools. These guidelines are based on authors´ experiences in creating two of such laboratories, one in Brazil and another one in Portugal. They are also based on visits to existing labs throughout the world and interviews with their coordinators. The objective is to help architecture schools plan new facilities or run recently established ones. For this reason, the chapter will be organized in topics and will include a checklist and some specific examples of equipment, software and results, as well as cost estimations. The issues addressed will include various aspects.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	cf2011_p135
id	cf2011_p135
authors	Chen Rui, Irene; Schnabel Marc Aurel
year	2011
title	Multi-touch - the future of design interaction
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 557-572.
summary	The next major revolution for design is to bring the natural user interaction into design activities. Graphical User Interfaces (GUI) brought a new approach that was more effective compared to their conventional predecessors. In recent years, Natural User Interfaces (NUI) have advanced user experiences and multi-touch and gesture technologies provide new opportunities for a variety of potential uses in design. Much attention has been paid to leverage in the design of interactive interfaces. The mouse input and desktop screen metaphors limit the information sharing for multiple users and also delayed the direct interaction for communication between each other. This paper proposes the innovative method by integrating game engine ‘Unity3D’ with multi-touch tangible interfaces. Unity3D provides a game development tool as part of its application package that has been designed to let users to focus on creating new games. However, it does not limit the usage of area to design additional game scenarios since the benefits of Unity3D is allowing users to build 3D environments with its customizable and easy to use editor, graphical pipelines to openGL (http://unity3d.com/, 2010 ). It creates Virtual Reality (VR) environments which can simulates places in the real world, as well as the virtual environments helping architects and designers to vividly represent their design concepts through 3D visualizations, and interactive media installations in a detailed multi-sensory experience. Stereoscopic displays advanced their spatial ability while solving issues to design e.g. urban spaces. The paper presents how a multi-touch tabletop can be used for these design collaboration and communication tasks. By using natural gestures, designers can now communicate and share their ideas by manipulating the same reference simultaneously using their own input simultaneously. Further studies showed that 3Dl forms are perceived and understood more readily through haptic and proprioceptive perception of tangible representations than through visual representation alone (Gillet et al, 2005). Based on the authors’ framework presented at the last CAADFutures, the benefits of integrating 3D visualization and tactile sensory can be illustrated in this platform (Chen and Wang, 2009), For instance, more than one designer can manipulate the 3D geometry objects on tabletop directly and can communicate successfully their ideas freely without having to waiting for the next person response. It made the work more effective which increases the overall efficiency. Designers can also collect the real-time data by any change they make instantly. The possibilities of Uniy3D make designing very flexible and fun, it is deeply engaging and expressive. Furthermore, the unity3D is revolutionizing the game development industry, its breakthrough development platform for creating highly interactive 3D content on the web (http://unity3d.com/ , 2010) or similar to the interface of modern multimedia devices such as the iPhone, therefore it allows the designers to work remotely in a collaborative way to integrate the design process by using the individual mobile devices while interacting design in a common platform. In design activities, people create an external representation of a domain, often of their own ideas and understanding. This platform helps learners to make their ideas concrete and explicit, and once externalized, subsequently they reflect upon their work how well it sits the real situation. The paper demonstrates how this tabletop innovatively replaces the typical desktop metaphor. In summary, the paper addresses two major issues through samples of collaborative design: firstly presenting aspects of learners’ interactions with physical objects, whereby tangible interfaces enables them constructing expressive representations passively (Marshall, 2007), while focussing on other tasks; and secondly showing how this novel design tool allows designers to actively create constructions that might not be possible with conventional media.
keywords	Multi-touch tabletop, Tangible User Interface
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2010_032
id	caadria2010_032
authors	Karakiewicz, Justyna and Thomas Kvan
year	2010
title	Diagrams as parametric systems in urban design: parametric systems applied to conceptual design
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 337-346
doi	https://doi.org/10.52842/conf.caadria.2010.337
summary	The paper describes how parametric systems have been used to help students bridge from conceptual design to descriptive results. Specifically, it describes projects set in two cities, Hong Kong and Melbourne, to address substantive urban design issues and illustrate that the approach is not scale or culturally bounded. The project undertaken in Hong Kong establishes interdependency models for dense urban structure and examined urban systems that contribute positively to their contextual setting. Parametric models were used to develop diagrams of site potential through models of air movement, light and sun exposure, in particular addressing air quality in one of the most polluted places in Hong Kong. The Melbourne case studies examine urban systems as self-organising systems. In these, the case studies identify parameters that determine two patterns: material pattern of the city and cognitive pattern of the city. The paper illustrates the use of a parametric system as a diagramming tool to explore urban propositions from an urban system.
keywords	Urbanism; systems thinking; parametric; diagrams
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	caadria2011_007
id	caadria2011_007
authors	Ko, Kaon and Salvator-John Liotta
year	2011
title	Digital tea house: Japanese tea ceremony as a pretext for exploring parametric design and digital fabrication in architectural education
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 71-80
doi	https://doi.org/10.52842/conf.caadria.2011.071
summary	This paper reviews the Digital Tea House, a joint workshop in August of 2010 held at the University of Tokyo, Department of Architecture, together with Columbia University GSAPP. Three pavilions for hosting ceremony were designed and built in less than one month, in an attempt to bridge technology and culture not only through design but also fabrication. Issues addressed in the process included applications of computational design, interpretations of tradition and culture in spatial or activity oriented expressions, structural stability, to practical solutions for quick physical materialization. Three teams comprised of 6 to 8 students, each a blend of different nationalities, ultimately produced 3 full-scale tea houses with the same software, primary material, budget, and principal fabrication method.
keywords	Digital fabrication; academic workshop; computational design; design-build; tea house
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	sigradi2020_174
id	sigradi2020_174
authors	Marques, Aline Calazans; Felicio, José Augusto Recker
year	2020
title	Dialogue between Building Shape and Thermal Performance
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 174-179
summary	This paper deals with the research of the building shape in a constant and dialectical relationship with thermal performance. The purpose of this research is to understand and explore the dialogue between shape and performance with generative strategies. The method was based on the works by Oxman (2010), Olgyay (2015), and Di Mari & Yoo (2012), by means that relate the form to performance issues. The thermal performance data found to result from the relationship between thermal conditions, the shape of the envelope, and the characteristics of the eight Brazilian bioclimatic zones.
keywords	Building shape, Thermal performance, Generative system, Teaching observation
series	SIGraDi
email
last changed	2021/07/16 11:48

_id	sigradi2016_492
id	sigradi2016_492
authors	Stumpp, Monika Maria; Braga, Gisele Pinna
year	2016
title	Imagens Digitais na Apresentaç?o de Projetos de Arquitetura: estudo na arquitetura brasileira contemporânea – Jacobsen Arquitetura [Digital images in Architecture Project Presentation: Study in contemporary Brazilian architecture - Jacobsen Arquitetura]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.50-57
summary	Architectural offices have been using rendered images in their electronic portfolios. What are the characteristics of these images? Is there any prevalent technique? Has a standard presentation already been established? This article presents a research that analyzed the rendered images found on the website of Jacobsen Arquitetura, one of the 25 offices elected in 2010 as the "new generation of Brazilian architecture". This study is part of the authors' research, which aims to identify how Brazilian contemporary architectural offices, which stand out in the architectural field, deal with these issues. The results provide subsidies for reflection on Brazilian architectural field, consequently, on architects and urban planners' education.
keywords	3D Rendering; Portfolio; Digital perspective, Digital Images
series	SIGRADI
email
last changed	2021/03/28 19:59

_id	ijac20108403
id	ijac20108403
authors	Aksamija, Ajla; Ivanka Iordanova
year	2010
title	Computational Environments with Multimodal Representations of Architectural Design Knowledge
source	International Journal of Architectural Computing vol. 8 - no. 4, p. 439
summary	This article discusses interaction between multimodal representations of architectural design knowledge, particularly focusing on relating explicit and implicit types of information. The aim of the presented research is to develop a computational environment that combines several modes of representation, including and integrating different forms of architectural design knowledge. Development of an interactive digital-models library and ontological model of architectural design factors are discussed, which are complementary in nature. In a time when BIM software is seen as embodiment of domain knowledge and the future medium of architectural design, this paper presents an interaction between ontological representation of architectural design knowledge and its embodiment in interactive models, thus focusing on the process of design and design space exploration. In the digital environments that we propose, representation of different formats of knowledge, such as visual, linguistic or numeric, are integrated with relational and procedural information, design rules, and characteristics. Interactive search and query based on contextual constraints, and parametric variation of the model based on the information received from ontology are the underlying drivers for design exploration and development.
series	journal
last changed	2019/05/24 09:55

For more results click below: