Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 408

Reformat results as: short short into frame detailed detailed into frame

_id	acadia10_151
id	acadia10_151
authors	Menges, Achim
year	2010
title	Material Information: Integrating Material Characteristics and Behavior in Computational Design for Performative Wood Construction
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 151-158
doi	https://doi.org/10.52842/conf.acadia.2010.151
summary	Architecture as a material practice is still predominantly based on design approaches that are characterized by a hierarchical relationship that prioritizes the generation of geometric information for the description of architectural systems and elements over material specific information. Thus, in the early design stage, the material’s innate characteristics and inherent capacities remain largely unconsidered. This is particularly evident in the way wood constructions are designed today. In comparison to most construction materials that are industrially produced and thus relatively homogeneous and isotropic, wood is profoundly different in that it is a naturally grown biological tissue with a highly differentiated material makeup . This paper will present research investigating how the transition from currently predominant modes of representational Computer Aided Design to algorithmic Computational Design allows for a significant change in employing wood’s complex anisotropic behaviour, resulting from its differentiated anatomical structure. In computational design, the relation between procedural formation, driving information, and ensuing form, enables the systematic integration of material information. This materially informed computational design processes will be explained through two research projects and the resultant prototype structures. The first project shows how an information feedback between material properties, system behaviour, the generative computational process, and robotic manufacturing allows for unfolding material-specific gestalt and tapping into the performative potential of wood. The second project focuses on embedding the unique material information and anatomical features of individual wooden elements in a continuous scanning, computational design and digital fabrication process, and thus introduces novel ways of integrating the biological variability and natural irregularities of wood in architectural design.
keywords	Computational Design, Digital Fabrication, Material Properties, Behavioural Modelling
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:58

_id	acadia10_333
id	acadia10_333
authors	Blough, Lawrence
year	2010
title	Digital Tracery: Fabricating Traits
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 333-339
doi	https://doi.org/10.52842/conf.acadia.2010.333
summary	Recently, prototyping enabled by CNC technology has found its way into design practice where concepts can be quickly and economically tested through multiple design iterations that closely approximate the realities of oneto- one construction. This has lead to the promise of renewed research in tectonics and constructional techniques where the traditional concepts of craft and the joint, that were once married to the hand, can be rediscovered through the agency of mass customization. If we apply the lineage of the trait—a representational and cognitive tool to marry complex form with the exigencies of construction—pedagogical approaches can be developed that extend the current interest in intricate surface, structural morphology and geometry towards a robust materiality rooted in componentry, the joint, and part-to-whole relationships. This paper will introduce several threads from the twentieth century that have informed these tendencies in contemporary design practice, emerging from the well spring of Viollet-le-Duc. The thesis is supported by undergraduate model-based research employing digital design and fabrication techniques.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	ecaade2010_158
id	ecaade2010_158
authors	Kuo, Jeannette; Zausinger, Dominik
year	2010
title	Scale and Complexity: Multi-layered, multi-scalar agent networks in time-based urban design
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.651-657
doi	https://doi.org/10.52842/conf.ecaade.2010.651
wos	WOS:000340629400070
summary	Urban design, perhaps even more than architecture, is a timedependent discipline. With its multi-layered complexities, from individual buildings to entire regions, decisions made at one level, that may not show effect immediately, may prove to have disastrous consequences further down the line. The need to incorporate time-based simulations in urban modeling, and the demand for a means of evaluating the changes have led to explorations with multi-agent systems in computation that allow for decisions to be decentralized. From the first basic rule-based system of Conway’s Game of Life [1] to recent urban simulations developed at institutions like the ETH Zurich [2], or UCL CASA [3], these programs synthesize the various exigencies into complex simulations so that the designer may make informed decisions. It is however not enough to simply use parametrics in urban design. Rules or desires implemented at one scale may not apply to another, while isolating each scalar layer for independent study reverts to the disjunctive and shortsighted practices of past planning decisions. Central to current parametric research in urban design is the need to deal with multiple scales of urbanism with specific intelligence that can then feed back into the collective system: a networked parametric environment. This paper will present the results from a city-generator, developed in Processing by Dino Rossi, Dominik Zausinger and Jeannette Kuo, using multiagent systems that operate interactively at various scales.
keywords	Agent-based modeling; Cellular automata; Parametric urbanism; Neural network; Complexity; Genetic algorithm; Urban dynamics
series	eCAADe
email
last changed	2022/06/07 07:52

_id	caadria2010_021
id	caadria2010_021
authors	Schnabel, Marc Aurel and Evelyn L. C. Howe
year	2010
title	The interprofessional virtual design studio
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 219-228
doi	https://doi.org/10.52842/conf.caadria.2010.219
summary	With the advent of Web 2.0 technologies, the Virtual Design Studio (VDS) has been revived in many schools of architecture around the globe. The recently evolving online Social Networks (SN) Platforms, as instruments for learning, have provided a potentially fruitful operative base for VDS. Yet these platforms have not enabled the VDS to explore new frontiers. All participants come from the same professional field and learn elements directly related to their existing design curriculum. The development of the VDS for interprofessional learning moves design education beyond conventional boundaries. The Interprofessional VDS (IPVDS) is an innovative method of teaching students from two different professional faculties the skills required for successful consultancy and promotional communication in the public realm. The IPVDS enabled students to develop consultancy skills and evidence-based communication strategies appropriate for disparate target audiences. It employed a digital SN learning platform to engage remotely-located students in acquiring new skills, transferring knowledge and achieving learning outcomes that enrich their professional experience. The paper presents details of the IPVDS, its methodology, outcomes, and evaluation of the studio, and discusses how the IPVDS is effective in enabling architectural students to understand and use communication and consultancy skills for collaboration across professional disciplines for the purpose of community engagement.
keywords	Virtual Design Studio; interprofessional; collaboration; consultancy; design skills
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ecaade2023_317
id	ecaade2023_317
authors	Zamani, Alireza, Mohseni, Alale and Bertug Çapunaman, Özgüç
year	2023
title	Reconfigurable Formwork System for Vision-Informed Conformal Robotic 3D Printing
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, pp. 387–396
doi	https://doi.org/10.52842/conf.ecaade.2023.1.387
summary	Robotic additive manufacturing has garnered significant research and development interest due to its transformative potential in architecture, engineering, and construction as a cost-effective, material-efficient, and energy-saving fabrication method. However, despite its potential, conventional approaches heavily depend on meticulously optimized work environments, as robotic arms possess limited information regarding their immediate surroundings (Bechthold, 2010; Bechthold & King, 2013). Furthermore, such approaches are often restricted to planar build surfaces and slicing algorithms due to computational and physical practicality, which consequently limits the feasibility of robotic solutions in scenarios involving complex geometries and materials. Building on previous work (Çapunaman et al., 2022), this research investigates conformal 3D printing of clay using a 6 degrees-of-freedom robot arm and a vision-based sensing framework on parametrically reconfigurable tensile hyperbolic paraboloid (hypar) formwork. In this paper, we present the implementation details of the formwork system, share findings from preliminary testing of the proposed workflow, and demonstrate application feasibility through a design exercise that aims to fabricate unique components for a poly-hypar surface structure. The formwork system also offers parametric control over generating complex, non-planar tensile surfaces to be printed on. Within the scope of this workflow, the vision-based sensing framework is employed to generate a digital twin informing iterative tuning of the formwork geometry and conformal toolpath planning on scanned geometries. Additionally, we utilized the augmented fabrication framework to observe and analyze deformations in the printed clay body that occurs during air drying. The proposed workflow, in conjunction with the vision-based sensing framework and the reconfigurable formwork, aims to minimize time and material waste in custom formwork fabrication and printing support materials for complex geometric panels and shell structures.
keywords	Robotic Fabrication, Conformal 3D Printing, Additive Manufacturing, Computer-Vision, Reconfigurable Formwork
series	eCAADe
email
last changed	2023/12/10 10:49

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ascaad2010_241
id	ascaad2010_241
authors	Aboreeda, Faten; Dina Taha
year	2010
title	Using Case-Based Reasoning to Aid Sustainable Design
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 241-246
summary	Since so far there exists only one planet, sustainable design is considered the (ethical) future in all fields of design. Although both architecture and construction are being considered major emitters of green house gases, a wise design not only can lead to minimizing this impact but it can also lead to restoring and regenerating the environment to a sustainable state. This paper presents an on-going research that aims at simplifying the elements and facilitating the process of sustainable design by using case-based reasoning. This is achieved through learning from past experiences; both good and bad ones, by providing a database application with a process-friendly interface which divides the main pillars of sustainable design into categories. Each building contains different stories related to different sustainable related issues. Each story can be repeated in /linked to many buildings. By providing designers with those past experiences, it is believed that deeper-studied designs can be more easily developed. Also a deeper analysis and understanding can be further implemented and produced with less effort for experienced and non-experienced architects in sustainable design. This would also decrease the consumption of time during the design process and encourage even more designers to integrate the sustainability concept into more designs. This research discusses the influence of sustainable design within the architectural domain, and suggests a computer application that aids architects during the preliminary design processes.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	ijac20108403
id	ijac20108403
authors	Aksamija, Ajla; Ivanka Iordanova
year	2010
title	Computational Environments with Multimodal Representations of Architectural Design Knowledge
source	International Journal of Architectural Computing vol. 8 - no. 4, p. 439
summary	This article discusses interaction between multimodal representations of architectural design knowledge, particularly focusing on relating explicit and implicit types of information. The aim of the presented research is to develop a computational environment that combines several modes of representation, including and integrating different forms of architectural design knowledge. Development of an interactive digital-models library and ontological model of architectural design factors are discussed, which are complementary in nature. In a time when BIM software is seen as embodiment of domain knowledge and the future medium of architectural design, this paper presents an interaction between ontological representation of architectural design knowledge and its embodiment in interactive models, thus focusing on the process of design and design space exploration. In the digital environments that we propose, representation of different formats of knowledge, such as visual, linguistic or numeric, are integrated with relational and procedural information, design rules, and characteristics. Interactive search and query based on contextual constraints, and parametric variation of the model based on the information received from ontology are the underlying drivers for design exploration and development.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2010_022
id	ecaade2010_022
authors	Al-kazzaz, Dhuha; Bridges, Alan; Chase, Scott
year	2010
title	Shape Grammars for Innovative Hybrid Typological Design
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.187-195
doi	https://doi.org/10.52842/conf.ecaade.2010.187
wos	WOS:000340629400020
summary	This paper describes a new methodology of deriving innovative hybrid designs using shape grammars of heterogeneous designs. The method is detailed within three phases of shape grammars: analysis, synthesis and evaluation. In the analysis phase, the research suggests that original rules of each design component are grouped in subclass rule sets to facilitate rule choices. Additionally, adding new hybrid rules to original rules expands the options available to the grammar user. In the synthesis phase, the research adopts state labels and markers to drive the design generation. The former is implemented with a user guide grammar to ensure hybridity in the generated design, while the latter aims to ensure feasible designs. Lastly evaluation criteria are added to measure the degree of innovation of the hybrid designs. This paper describes the derivation of hybrid minaret designs from a corpus of heterogeneous traditional minaret designs.
keywords	Shape grammar; Parallel grammar; Hybrid design; Typology
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2010_029
id	caadria2010_029
authors	Baerlecken, Daniel; Martin Manegold, Judith Reitz and Arne Kuenstler
year	2010
title	Integrative parametric form-finding processes
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 303-312
doi	https://doi.org/10.52842/conf.caadria.2010.303
summary	The recent developments in digital technologies and contemporary design tools are initiating new approaches of form-finding based on parametric development of multiple geometries with simultaneous consideration of various aspects. This paper focuses on the use of advanced parametric CAD systems and reformulated construction logics to enhance the potential and possibilities of form finding processes. This approach is exemplified through the “Greenhouse Trauttmansdorff project”. The project demonstrates a form finding approach which is based on defined parameters that not only fulfil aesthetic and functional aspects, but simultaneously take structural properties and the resulting sun shading behaviour into account. We will explore within this paper how – next to the functional and contextual building requirements – required illumination levels inside the greenhouse create a feedback loop between the structural system and its cladding system.
keywords	parametric representations; digital technologies; digital fabrication; variable systems; load bearing construction
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia10_313
id	acadia10_313
authors	Banda, Pablo
year	2010
title	Parametric Propagation of Acoustical Absorbers
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 313-319
doi	https://doi.org/10.52842/conf.acadia.2010.313
summary	The following paper deals with a performance-driven morphogenetic design task to improve the conditions of room acoustics, using as a case study the material laboratory of the School of Architecture at Federico Santa Maria University of Technology. Combining contemporary Parametric Modeling techniques and a Performance- Based approach, an automatic generative system was produced. This system generated a modular acoustic ceiling based on Helmholtz Resonators. To satisfy sound absorption requirements, acoustic knowledge was embedded within the system. It iterates through a series of design sub-tasks from Acoustic Simulation to Digital Fabrication, searching for a suitable design solution. The internal algorithmic complexity of the design process has been explored through this case study. Although it is focused on an acoustic component, the proposed design methodology can influence other experiences in Parametric Design.
keywords	Parametric Modeling, Sound Absorption & Acoustic Knowledge, Performance-Based Design, Design Task, Scripting, Digital Fabrication, Custom Tools, Honeycomb.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaade2010_215
id	ecaade2010_215
authors	Barczik, Guenter
year	2010
title	Uneasy Coincidence? Massive Urbanization and New Exotic Geometries with Algebraic Geometry as an Extreme Example
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.217-226
doi	https://doi.org/10.52842/conf.ecaade.2010.217
wos	WOS:000340629400023
summary	We investigate the recent coincidence of rapid global urbanization and unprecedented formal freedom in architectural design and ask whether this coincidence is an uneasy one. To study an extreme case of the new exotic geometries made possible through CAAD, we employ algebraic surfaces to experimentally design architecture in an university-based research and experimental design project. Such surfaces exhibit unprecedented complexity and new geometric and topological features yet are highly sound and harmonious. We continue and extend our research presented at the eCAADe 2009 conference in Istanbul.
keywords	Algebraic geometry; Shape; Sculpture; design; Tool; Experiment; Methodology; Software
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2010_183
id	ecaade2010_183
authors	Bourdakis, Vassilis
year	2010
title	Designing Interactions: A step forward from time based media and synthetic space design in architectural education
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.151-156
doi	https://doi.org/10.52842/conf.ecaade.2010.151
wos	WOS:000340629400016
summary	The paper follows the development of digital tools for architects and briefly discusses their utility within education and practice. The move from static CAD tools to time based media followed by programmatic processes and virtual environment design is addressing the evolution of the profession and to an extent reflects practitioners’ needs. The paper focuses on the notion of interactivity and how it is been addressed in various fields. Borrowing from computer science and game design the author presents a course dealing with designing interactivity, responsiveness and users feeding their input back in the design. The aim of the paper is to analyse and support a new set of tools in architectural curricula that will implement interactivity and integrate it into spatial design leading to a holistic approach promoting intelligence, hybridity and responsiveness of the built environment. Following, the elaboration of the rationale, a brief discussion on tools and project directions is carried out.
keywords	Interaction; Virtual environments; Time based media; Curriculum; Intelligent environments
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2010_279
id	ascaad2010_279
authors	Celani, G.; L. Medrano; J. Spinelli
year	2010
title	Unicamp 2030: A plan for increasing a university campus in a sustainable way and an example of integrated use of CAAD simulation and computational design strategies
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 279-286
summary	The state university of Campinas, Unicamp, is a public university in upstate São Paulo, Brazil, ranked the second best in the country. It was founded in 1966, and its main campus started to be built in 1967, in the suburbs of Campinas, nowadays a two-million people city. The area of the campus is almost 3 million square meters (300 hectares), with a total built area of 522.000 m2 and a population of 40 thousand people - 30 thousand students, 2 thousand faculty members and almost 8 thousand staff members. The campus’ gross population density is 133 people per hectare. Less than 6% of the total campus area is presently occupied. The design of Unicamp's campus is based on concepts that were typical of the modern movement, with reminiscences of corbusian urbanism, in which preference is given to cars and buildings are spread apart on the territory, with little concern to the circulation of pedestrians. The standard building type that has been built on campus since the 1970's is based on non-recyclable materials, and has a poor thermal performance. Unicamp is expected to double its number of students by the year 2030. The campus density is thus expected to grow from 600 people per hectare to almost 1,000 people per hectare. The need to construct new buildings is seen as an opportunity to correct certain characteristics of the campus that are now seen as mistakes, according to sustainability principles. This paper describes a set of proposals targeting the increase of the campus' density in a sustainable way. The plan also aims at increasing the quality of life on campus and diminishing its impact on the environment. The main targets are: - Reducing the average temperature by 2oC; - Reducing the average displacement time by 15 minutes; - Increasing the campus' density by 100%; - Reducing the CO2 emissions by 50%. // In order to achieve these goals, the following actions have been proposed: Developing a new standard building for the university, incorporating sustainability issues, such as the use of renewable and/or recyclable materials, the installation of rainwater storage tanks, the use of natural ventilation for cooling, sitting the buildings in such a way to decrease thermal gain, and other issues that are required for sustainable buildings' international certifications. To assess the performance of the new standard building, different simulation software were used, such as CFD for checking ventilation, light simulation software to assess energy consumption, and so on. 1. Filling up under-utilized urban areas in the campus with new buildings, to make better use of unused infrastructure and decrease the distance between buildings. 2. Proposing new bicycle paths in and outside campus, and proposing changes in the existing bicycle path to improve its safety. 3. Developing a landscape design plan that aims at creating shaded pedestrian and bicycle passageways.
series	ASCAAD
type	normal paper
email
last changed	2021/07/16 10:37

_id	ascaad2010_065
id	ascaad2010_065
authors	Celani, Gabriela; Jose_ Duarte and Regiane Pupo
year	2010
title	Introducing Digital Fabrication Laboratories in Architecture Schools
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 65-74
summary	The present paper proposes a set of guidelines for the implementation of digital fabrication laboratories for education and research in architecture schools. These guidelines are based on authors´ experiences in creating two of such laboratories, one in Brazil and another one in Portugal. They are also based on visits to existing labs throughout the world and interviews with their coordinators. The objective is to help architecture schools plan new facilities or run recently established ones. For this reason, the chapter will be organized in topics and will include a checklist and some specific examples of equipment, software and results, as well as cost estimations. The issues addressed will include various aspects.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	caadria2010_042
id	caadria2010_042
authors	Celento, David
year	2010
title	Open-source, parametric architecture to propagate hyper-dense, sustainable urban communities: parametric urban dwellings for the experience economy
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 443-452
doi	https://doi.org/10.52842/conf.caadria.2010.443
summary	Rapid developments in societal, technological, and natural systems suggest profound changes ahead if research in panarchical systems (Holling, 2001) is to be believed. Panarchy suggests that systems, both natural and man-made, rise to the point of vulnerability then fail due to disruptive forces in a process of ‘creative destruction.’ This sequence allows for radical, and often unpredictable, renewal. Pressing sustainability concerns, burgeoning urban growth, and emergent ‘green manufacturing’ laws, suggest that future urban dwellings are headed toward Gladwell’s ‘tipping point’ (2002). Hyper-dense, sustainable, urban communities that employ open-source standards, parametric software, and web-based configurators are the new frontier for venerable visions. Open-source standards will permit the design, manufacture, and sale of highly diverse, inter-operable components to create compact urban living environments that are technologically sophisticated, sustainable, and mobile. These mass-customised dwellings, akin to branded consumer goods, will address previous shortcomings for prefabricated, mobile dwellings by stimulating consumer desire in ways that extend the arguments of both Joseph Pine (1992) and Anna Klingman (2007). Arguments presented by authors Makimoto and Manners (1997) – which assert that the adoption of digital and mobile technologies will create large-scale societal shifts – will be extended with several solutions proposed.
keywords	Mass customisation; urban dwellings; open source standards; parametric design; sustainability
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	acadia11_186
id	acadia11_186
authors	Chaturvedi, Sanhita; Colmenares, Esteban; Mundim, Thiago
year	2011
title	Knitectonics
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 186-195
doi	https://doi.org/10.52842/conf.acadia.2011.186
summary	The project Knitectonics aims at exploring digital fabrication systems that facilitate optimized, adaptive and specific integrated architectural solutions (Male-Alemany 2010). It is inspired by the beauty of nature systems with their inherent efficiency and performance. The research explored on-site fabrication of monocoques shells, integrating skin and structure along with services and infrastructure, using a simple household technique. It thus embodies a self organized micro system of textures and a macro system of structures. This paper elaborates how the numeric aspects of a textile technique were used, first to digitally imitate the process of assembly and further exploited to develop and visualize a novel fabrication system, based on material research and technical experimentation.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	caadria2010_028
id	caadria2010_028
authors	Chellappa, J. and H.-J. Park
year	2010
title	BIM + healthcare: on the view of a primary healthcare renovation project
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 293-302
doi	https://doi.org/10.52842/conf.caadria.2010.293
summary	Currently BIM is at the forefront of the building industry. While useful for various building types the definitive nature of healthcare design benefits from the BIM process largely in comparison to other building types. In this paper BIM is employed for phasing the design process of the healthcare project, creating modelling prototypes and making reference to a baseline model in order to increase the overall success of the healthcare design project.
keywords	Building information modelling; healthcare; evidence-based design; prototype; baseline model
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:55

For more results click below: