Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 159

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2021_189
id	sigradi2021_189
authors	Paiva Ponzio, Angelica, Giudoux Gonzaga, Mario, Pires de Castro Aguiar Vale, Marina, Bruscato, Underléa Miotto and Mog, William
year	2021
title	Parametric Design Learning Strategies in the Context of Architectural Design Remote Teaching
source	Gomez, P and Braida, F (eds.), Designing Possibilities - Proceedings of the XXV International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2021), Online, 8 - 12 November 2021, pp. 1077–1088
summary	This article aims to demonstrate how a theoretical-didactic model and its respective teaching strategies for algorithmic-parametric logic can act as potential elements of innovation in the architectural design process. Based on the theories of parametric design thinking by Oxman (2017) and the studies by Woodbury (2010) and Romcy (2017), such strategies are based on the principle that algorithmic logic can be understood, in certain circumstances, as a procedural framework and not just an instrumental one. It will also be discussed how the situation of remote learning in the face of the COVID-19 crisis brought about the use of virtual teaching tools as an increment of the learning process.
keywords	Architectural teaching, computational design, parametric design thinking, design process, algorithmic design
series	SIGraDi
email
last changed	2022/05/23 12:11

_id	ecaade2010_183
id	ecaade2010_183
authors	Bourdakis, Vassilis
year	2010
title	Designing Interactions: A step forward from time based media and synthetic space design in architectural education
doi	https://doi.org/10.52842/conf.ecaade.2010.151
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.151-156
summary	The paper follows the development of digital tools for architects and briefly discusses their utility within education and practice. The move from static CAD tools to time based media followed by programmatic processes and virtual environment design is addressing the evolution of the profession and to an extent reflects practitioners’ needs. The paper focuses on the notion of interactivity and how it is been addressed in various fields. Borrowing from computer science and game design the author presents a course dealing with designing interactivity, responsiveness and users feeding their input back in the design. The aim of the paper is to analyse and support a new set of tools in architectural curricula that will implement interactivity and integrate it into spatial design leading to a holistic approach promoting intelligence, hybridity and responsiveness of the built environment. Following, the elaboration of the rationale, a brief discussion on tools and project directions is carried out.
wos	WOS:000340629400016
keywords	Interaction; Virtual environments; Time based media; Curriculum; Intelligent environments
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2010_000
id	caadria2010_000
authors	Dave, Bharat; Andrew I-kang Li, Ning Gu and Hyoung-June Park
year	2010
title	CAADRIA2010: New frontiers
doi	https://doi.org/10.52842/conf.caadria.2010
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, 644p.
summary	The ideas and projects described in papers on the following pages provide one snapshot of current research in computer-aided architectural design from around the world. The papers explore the field from diverse perspectives, emphasise different foci, employ a range of methodologies, and demonstrate many different ways in which designs and designing can be construed, understood and supported using digital tools and technologies. The notion of frontiers in this collection of papers reflects not just a quest for new problems but also a reassessment of what we already know, not just what is conventionally understood as design in terms of tangible material configurations but also what may exist only as processes or as immaterial and virtual representations.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	ecaade2010_074
id	ecaade2010_074
authors	Droste, Stephan
year	2010
title	Extreme Designing: Proposal for the transfer of concepts from the agile development to the architectural design process
doi	https://doi.org/10.52842/conf.ecaade.2010.661
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.661-666
summary	Obviously, design collaboration, the design process, and its methods are strongly interdependent. In order do understand collaborative processes and their requirements, methods of design process are focused prelimarly. After the hype during the last decades collaborative design seems to remain in a selfcentred discourse with little concrete application outside the academic world, while in the same time collaboration is omnipresent in conventional architectural design. Interestingly, the initiation of the so called agile methods in software design were initiated by new tools and paradigms in software design and on the other hand defective conditions in the collaborative process, corresponding widely to the challenges of the architectural design process. This paper opposes principles of software development to the architect’s approach to (early) design. Subsequently some implications for the extension of (collaborative) design tools are suggested.
wos	WOS:000340629400071
keywords	Design process; Collaborative design; Design methods; Agile processes; Software development
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2014_035
id	ecaade2014_035
authors	Kate_ina Nováková and Henri Achten
year	2014
title	Do (not) sketch into my sketch - A comparison of existing tools
doi	https://doi.org/10.52842/conf.ecaade.2014.2.237
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 237-243
summary	Various computer-aided sketch tools can be used to support architectural designing (Tang, Lee, Gero, 2010) either individually in early stage of the process or in communication. We focus on the second mentioned. The goal of this paper is to give an overview of possible applications and mention the platforms which are supported. We explore the advantages or disadvantages of the tools and compare it with our newly developed application called ColLab sketch. With this application we hope in increasing speed and ease of graphic communication on one hand and testing architects demands on the other hand. We develop multiple criteria for evaluating the tools, while believing this paper could be of use to give a hint how to improve remote as well as co-located collaborative designing by sketch. Architectural designing is a very sensitive topic when it comes to sketching. Finally, we would like to compare the newly developed tool to this list and suggest improvements or experiments that help its finalizing.
wos	WOS:000361385100025
keywords	Sketching; collaboration; electronic devices; sketch applications
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ascaad2010_019
id	ascaad2010_019
authors	Katz, Neil C.
year	2010
title	Algorithmic Modeling; Parametric Thinking: Computational Solutions to Design Problems
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 19-36
summary	Architects and designers have often used computational design techniques in their design process, even without "computers", from designing spaces which activate at the instant of the solstice sunrise, to creating geometrically complex and structurally innovative cathedrals. Designing with rules and variables can lead to solutions which satisfy the design criteria and may result in interesting and unanticipated models. Computational design is a process of designing and a way of thinking; contemporary tools can promote and enhance this process. Algorithmic and parametric modeling (and thinking) can be powerful processes in design, and particularly in working with complex geometry and addressing project constraints and analytical and data-driven design. This paper describes these methods and provides examples of their use on projects at Skidmore, Owings & Merrill.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	ijac20108409
id	ijac20108409
authors	Novakova, Katerina; Henri Achten, Dana Matejovska
year	2010
title	A Design Studio Pedagogy for Experiments with Unusual Material, Collaboration and Web Communication
source	International Journal of Architectural Computing vol. 8 - no. 4, p. 557
summary	In this paper we describe an experimental CAD design studio, where we study the influence of CAD tools and special materials on the process of designing. The studio has the following aims: teaching how to collaborate using an Internet facility, and exploring the relationship between computation, sketching and physical models. Interaction and sustainability are major themes in the design studio. We present the pedagogical approach and results of the design studio, followed by observations and conclusions.
series	journal
last changed	2019/05/24 09:55

_id	ascaad2010_075
id	ascaad2010_075
authors	Schubert, Gerhard; Kaufmann Stefan and Petzold Frank
year	2010
title	Project Wave 0.18
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 75-88
summary	In recent years a number of projects have been emerged, in which the new possibilities of the computer as a design tool, have been used. Through the digital chain from design to manufacturing the efficiency has increased and allows the implementation of complex architectural structures. With all these new opportunities, also new challenges arise in the teaching and the educational concepts. The paper describes the detailed course concept and the didactic strategy using the example of a parametric designed roof structure, we designed, planed and build up in scale 1:1 within the main course. „Wendepunkt\|e im Bauen“ (Turning point\|s of building) is the name of an exhibition at the “Pinakothek der Moderne” in Spring 2010. In addition to contributions of the industrialization in the building industry from 1850 to the present day, the exhibition also serves as a platform, to demonstrate new possibilities of computer-aided parametric design and the closely related computer aided manufacturing (CAM). In this context, we took the chance to build a sculpture in Scale 1:1 to show the potential of a constant digital workflow and the digital fabrication. Through the digital chain from design to manufacturing, the efficiency has been increased by the computer and allows the implementation of new complex architectural structures. But the efficiency of the high-degree-automation through the use of computerized machines usually ends in the production of the components. Because this coincidence of the elements in the assembly often proves cost and time, the aim of the project was to optimize both, the production of components and their assembly as well. As part of the wintercourse 2009/2010 different aspects of automation have been reviewed and new solutions have been analyzed. Together with 15 students of the Faculty of Architecture the complete digital chain started with the first design ideas, about parametric programming through production and assembly had been researched, implemented and brought to reality. In the first steps, the students had to learn about the potential, but also about the problems coming with the digital-design and the attached digital-production. There for the course took part at our computerlab. In weekly workshops, all ideas have been implemented and tested directly in the 3-dimensional parametric model. And thanks to the interdisciplinary work with the Department of Structural Design also static factors had been considered, to optimize the form. Parallel to the digital form-finding process, the first prototypes have been produced by the students. By using the chairs 3D-CNC-Mills we were able to check the programmed connection detail in reality and apply the so learned lessons to the further development. After nearly 3 month of research, designing, planning and programming, we were able to produce the over 1000 different parts in only 4 days. By developing a special pre-stressed structure and connection detail it was also possible, to assemble the whole structure (13.5m x 4.5m x 4m) in only one day. The close connection between digital design (CAD) and digital manufacturing (CAM) is an important point of our doctrine. By the fact, that the students operate the machines themselves, but also implement projects on a scale of 1:1, they learn to independently evaluate these new tools and to use them in a meaningful way.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	cf2011_p060
id	cf2011_p060
authors	Sheward, Hugo; Eastman Charles
year	2011
title	Preliminary Concept Design (PCD) Tools for Laboratory Buildings, Automated Design Optimization and Assessment Embedded in Building Information Modeling (BIM) Tools.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 451-476.
summary	The design of laboratory buildings entails the implementation of a variety of design constraints such as building codes; design guidelines and technical requirements. The application of these requires from designers the derivation of data not explicitly available at early stages of design, at the same time there is no precise methodology to control the consistency, and accuracy of their application. Many of these constraints deal with providing secure environmental conditions for the activities inside laboratories and their repercussions both for the building occupants and population in general, these constraints mandate a strict control over the building‚Äôs Mechanical Equipment (MEP), in particular the Heating Ventilating and Air Conditioning (HVAC) system. Due to the importance of these laboratory designers are expected to assess their designs not only according spatial relationships, but also design variables such as HVAC efficiency, air pressure hierarchies, operational costs, and the possible implications of their design decisions in the biological safety of the facility. At this point in time, there are no practical methods for making these assessments, without having constant interaction with HVAC specialists. The assessment of laboratory design variables, particularly those technical in nature, such as dimensioning of ducts or energy consumption are usually performed at late stages of design. They are performed by domain experts using data manually extracted from design information, with the addition of domain specific knowledge, the evaluation is done mostly through manual calculations or building simulations. In traditional practices most expert evaluations are performed once the architectural design have been completed, the turn around of the evaluation might take hours or days depending on the methods used by the engineer, therefore reducing the possibility for design alternatives evaluation. The results of these evaluations will give clues about sizing of the HVAC equipment, and might generate the need for design reformulations, causing higher development costs and time delays. Several efforts in the development of computational tools for automated design evaluation such as wheel chair accessibility (Han, Law, Latombe, Kunz, 2002) security and circulation (Eastman, 2009), and construction codes (ww.Corenet.gov.sg) have demonstrated the capabilities of rule or parameter based building assessment; several computer applications capable of supporting HVAC engineers in system designing for late concept or design development exist, but little has been done to assess the capabilities of computer applications to support laboratory design during architectural Preliminary Concept Design(PCD) (Trcka, Hensen, 2010). Developments in CAD technologies such as Building Information Modeling (BIM) have opened doors to formal explorations in generative design using rule based or parametric modeling [7]. BIM represents buildings as a collection of objects with their own geometry, attributes, and relations. BIM also allows for the definition of objects parametrically including their relation to other model objects. BIM has enabled the development of automated rule based building evaluation (Eastman, 2009). Most of contemporary BIM applications contemplate in their default user interfaces access to design constraints and object attribute manipulations. Some even allow for the application of rules over these. Such capabilities make BIM viable platforms for automation of design data derivation and for the implementation of generative based design assessment. In this paper we analyze the possibilities provided by contemporary BIM for implementing generative based design assessment in laboratory buildings. In this schema, domain specific knowledge is embedded in to the BIM system as to make explicit design metrics that can help designers and engineers to assess the performance of design alternatives. The implementation of generative design assessments during PCD can help designers and engineers to identify design issues early in the process, reducing the number of revisions and reconfigurations in later stages of design. And generally improving design performance.
keywords	Heating ventilating and Air Conditioning (HVAC), Building Information Models (BIM), Generative Design Assessment
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ascaad2014_023
id	ascaad2014_023
authors	Al-Maiyah, Sura and Hisham Elkadi
year	2014
title	Assessing the Use of Advanced Daylight Simulation Modelling Tools in Enhancing the Student Learning Experience
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 303-313
summary	In architecture schools, where the ‘studio culture’ lies at the heart of students’ learning, taught courses, particularly technology ones, are often seen as secondary or supplementary units. Successful delivery of such courses, where students can act effectively, be motivated and engaged, is a rather demanding task requiring careful planning and the use of various teaching styles. A recent challenge that faces architecture education today, and subsequently influences the way technology courses are being designed, is the growing trend in practice towards environmentally responsive design and the need for graduates with new skills in sustainable construction and urban ecology (HEFCE’s consultation document, 2005). This article presents the role of innovative simulation modelling tools in the enhancement of the student learning experience and professional development. Reference is made to a teaching practice that has recently been applied at Portsmouth School of Architecture in the United Kingdom and piloted at Deakin University in Australia. The work focuses on the structure and delivery of one of the two main technology units in the second year architecture programme that underwent two main phases of revision during the academic years 2009/10 and 2010/11. The article examines the inclusion of advanced daylight simulation modelling tools in the unit programme, and measures the effectiveness of enhancing its delivery as a key component of the curriculum on the student learning experience. A main objective of the work was to explain whether or not the introduction of a simulation modelling component, and the later improvement of its integration with the course programme and assessment, has contributed to a better learning experience and level of engagement. Student feedback and the grade distribution pattern over the last three academic years were collected and analyzed. The analysis of student feedback on the revised modelling component showed a positive influence on the learning experience and level of satisfaction and engagement. An improvement in student performance was also recorded over the last two academic years and following the implementation of new assessment design.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ijac20108206
id	ijac20108206
authors	Bravo, Germán; Rafael Villazón, Augusto Trujillo, Mauricio Caviedes
year	2010
title	Authoring Tools for KOC - Concepts and Pedagogical Use
source	International Journal of Architectural Computing vol. 8 - no. 2, 183-200
summary	One of the main problems of teachers aiming to teach the construction techniques used in to build a building is the lack of practical examples to show to their students. In order to be useful, these examples must come from real projects or even better the teachers may take their students to constructions sites, but this latter option is not always available and may be dangerous. To deal with this problem, Los Andes University has committed the construction of a knowledge repository containing information gathered from real projects and semantically described, in order to provide easy access to its content and in the language of people of construction. This project is called KOC, standing for Knowledge Objects of Construction, which uses an ontology to describe semantically the data contained in the repository. Being the pedagogical objective of the project, it is important to provide the teachers with additional tools to generate new knowledge objects, based on existing knowledge objects in the repository. This paper presents three composition tools for KOC: a complex objects composer issued from structured searches, a constructive processes composer and a case study composer, all of them aiming the improvement of learning quality in the technical area of building construction at the architecture and engineering schools. The paper also shows some examples of knowledge objects and how KOC is been used in the courses of the Architecture Department of Los Andes.
series	journal
last changed	2019/05/24 09:55

_id	caadria2010_027
id	caadria2010_027
authors	Fernando, Ruwan; Robin Drogemuller, Flora Dilys Salim and Jane Burry
year	2010
title	Patterns, heuristics for architectural design support: making use of evolutionary modelling in design
doi	https://doi.org/10.52842/conf.caadria.2010.283
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 283-292
summary	Software used by architectural and industrial designers has shifted from becoming a tool for drafting, towards use in verification, simulation, project management and remote project sharing. In more advanced models, design parameters for the designed object can be adjusted so that a family of variations can be produced rapidly. With the advances in computer aided design (CAD) technology, design options can now be generated and analyzed in real time. However the use of digital tools to support design as an activity is still at an early stage and has largely been limited in functionality with regard to the design process. To date, major CAD vendors have not developed an integrated tool that is able to leverage specialised design knowledge from various discipline domains (known as expert knowledge systems) as well as to support the creation of design alternatives that satisfy different forms of constraints. We propose that evolutionary computing and machine learning be linked with parametric design techniques in order to monitor a designer’s cognition and intent based on their design history. This will lead to results that impact future work on design support systems which are capable of supporting implicit constraint and problem definition for wicked problems that are difficult to quantify.
keywords	Design support; heuristics; generative modelling; parametric modelling; evolutionary computation
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	sigradi2010_281
id	sigradi2010_281
authors	Granero, Adriana Edith; Garcia Alvarado Rodrigo
year	2010
title	Flujo energético en las etapas tempranas del proceso de diseño arquitectónico y la importancia de generar aprendizajes significativos [Energy flow in early stages of architectural design process, and the importance of creating meaningful learning]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 281-284
summary	This proposal seeks to stimulate energy conceptualization in the early stages of architectural design through the visualization of energy conditions as a dialogue in initial design configurations that is based on the integration of two software tools to facilitate meaningful learning. Students today have analytical intelligence that they have acquired through teaching themselves, and this has developed their creativity and their experiential - contextual practice; this permits effective interpretation of symbolic cognition. Digital tools of building, information modeling, and energy analysis can be related to specific features that promote this integrated design learning.
keywords	KEY WORDS: performance views, building information modeling, visual and thermal comfort, integrated design learning, efficiency andoptimization.
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ecaade2010_017
id	ecaade2010_017
authors	Hemsath, Timothy L.
year	2010
title	Searching for Innovation Through Teaching Digital Fabrication
doi	https://doi.org/10.52842/conf.ecaade.2010.021
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.21-30
summary	The use of digital fabrication in the discourse and education of architectural students has become a common skill in many schools of architecture. There is a growing demand for computer-aided design (CAD) skills, computer-aided manufacturing (CAM) logic, programming and fabrication knowledge in student education. The relevance of fabrication tools for architecture and design education goes beyond mere competence and can pursue innovation in what Branko Koleravic (2003) observed, “The digital age has radically reconfigured the relationship between conception and production, creating a direct digital link between what can be conceived and what can be built through “file-to-factory” processes of computer numerically controlled (CNC) fabrication”. However, there has been very little written about what students are actually learning through digital fabrication courses and the relevance of the skills required for innovation in the field of digital fabrication.
wos	WOS:000340629400001
keywords	CAD; CAM; Pedagogy; Curriculum
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ijac20108204
id	ijac20108204
authors	Jacobus, Frank; Jay McCormack, Josh Hartung
year	2010
title	The Chair Back Experiment: Hierarchical Temporal Memory and the Evolution of Artificial Intelligence in Architecture
source	International Journal of Architectural Computing vol. 8 - no. 2, 151-164
summary	Computational synthesis tools that automatically generate solutions to design problems are not widely used in architectural practice despite many years of research. This deficiency can be attributed, in part, to the difficulty of constructing robust building specific databases. New advances in artificial intelligence such as Hierarchical Temporal Memory (HTM) have the potential to make the construction of these databases more realistic in the near future. Based on an emerging theory of human neurological function, HTMs excel at ambiguous pattern recognition. This paper includes a first experiment using HTMs for learning and recognizing patterns in the form of visual style characteristics in three distinct chair back types. Results from the experiment indicate that HTMs develop a similar storage of quality to humans and are therefore a promising option for capturing multi-modal information in future design automation efforts.
series	journal
last changed	2019/05/24 09:55

_id	sigradi2010_108
id	sigradi2010_108
authors	Olmos, Reverón Francisco
year	2010
title	Herramientas virtuales y estrategias interactivas para el desarrollo de habilidades de diseño en el taller de diseño digital [Virtual tools and interactive strategies for design skills development, in a digital design workshop]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 108-111
summary	Computers are very common drawing tools in university design studios, but their potential as training tools in arts and design has not been explored in depth. Therefore, there is little understanding of how to incorporate digital and virtual media as learning tools in design studios. This paper describes the use of training programs in an experimental design course at the university level. This experiment was carried out as part of PhD research performed at the Faculty of Architecture and Arts at the Universidad de los Andes in Merida, Venezuela.
keywords	e - learning, virtual studio, design training, virtual environment
series	SIGRADI
email
last changed	2016/03/10 09:56

_id	sigradi2010_290
id	sigradi2010_290
authors	Toloudi, Zenovia
year	2010
title	Forming and Perceiving Architectonic Taste through PICANICO and Architaste
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 290-293
summary	This paper assumes that in an information - rich and time - poor society, mental shortcuts that discourage rational thought are important in shaping decisions among selections. The research focuses on understanding and forming the taste of people on architects’ identities. The broader scope aims to establish an architectonic language of communication based on the links emerging among identity - taste dyads. The methodology consists of surveys, social networks analysis tools and PICANICO game: they all gather, classify and eventually form this language’s mental shortcuts. A possible application of this experimentation is an interface between the architect and the client, where the learning yields out of a left right arrow.
keywords	identity, taste, aesthetics, form, decision making
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	sigradi2010_312
id	sigradi2010_312
authors	Villate, Camilo; Bravo Germán; Tamayo Brando; Mauricio Caviedes
year	2010
title	La toma de decisiones en cursos del área técnica de arquitectura con herramientas tecnológicas basadas en el conocimiento [Decision - making in architecture technical areas, using knowledge based tools]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 312-315
summary	Specialists and educators have proven the effectiveness of using case studies as a learning support method. In the teaching of architectural techniques some technologically - based tools have been developed that enable students to accumulate technical data from studied cases. Nevertheless, this way of presenting case studies to students has restricted their potential because it promotes design fixation, typification, and functional incoherence. A complementary TIC - based tool for case studies is presented here, which allows the relation of technical data to the dynamic situations that produce them. This new tool is designed to increase students´ analysis and design capacities, and turns accumulative technical data systems into integral technological tools for teaching architectural techniques.
keywords	case studies; design fixation; repository systems; dynamic of situations
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	acadia10_263
id	acadia10_263
authors	Beaman, Michael Leighton; Bader, Stefan
year	2010
title	Responsive Shading \| Intelligent Façade Systems
doi	https://doi.org/10.52842/conf.acadia.2010.263
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 263-270
summary	As issues of sustainability gain traction for architects, methodologies for designing, analyzing, and calibrating design solutions have emerged as essential areas of research and development. A number of approaches have been pursued with regard to embedding data into the design process, most fall into one of two approaches to research. The first approach is to mediate environmental impact at the level of applied technology; the second alters building methods and material construction, generating efficient energy use. However, few approaches deal with the crafting of relationships between information and performance on an architectural level. We will examine an approach focused on understanding how crafting relationships between information and design can move architecture towards achieving sustainability. In developing this approach, we created a data-driven design methodology spanning from design inception to construction. Data-driven models, common in the fields of natural science, offer a method to generate and test a multiplicity of responsive solutions. By contextualizing the solutions generated, we were able design though a set of specific and controlled responses rather than as a singular solution. Information utilization requires a new kind of craft that moves beyond instances into relationships and offers performance sensitive issues in design a focused trajectory. We applied this method to the research and development of a responsive shading structure built in conjunction with a thermal testing lab for two test locations – Austin, Texas (Figure. 1 and 2) and Munich, Germany. The following paper chronicles the design and construction at the Texas site over an academic semester.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	cf2011_p135
id	cf2011_p135
authors	Chen Rui, Irene; Schnabel Marc Aurel
year	2011
title	Multi-touch - the future of design interaction
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 557-572.
summary	The next major revolution for design is to bring the natural user interaction into design activities. Graphical User Interfaces (GUI) brought a new approach that was more effective compared to their conventional predecessors. In recent years, Natural User Interfaces (NUI) have advanced user experiences and multi-touch and gesture technologies provide new opportunities for a variety of potential uses in design. Much attention has been paid to leverage in the design of interactive interfaces. The mouse input and desktop screen metaphors limit the information sharing for multiple users and also delayed the direct interaction for communication between each other. This paper proposes the innovative method by integrating game engine ‘Unity3D’ with multi-touch tangible interfaces. Unity3D provides a game development tool as part of its application package that has been designed to let users to focus on creating new games. However, it does not limit the usage of area to design additional game scenarios since the benefits of Unity3D is allowing users to build 3D environments with its customizable and easy to use editor, graphical pipelines to openGL (http://unity3d.com/, 2010 ). It creates Virtual Reality (VR) environments which can simulates places in the real world, as well as the virtual environments helping architects and designers to vividly represent their design concepts through 3D visualizations, and interactive media installations in a detailed multi-sensory experience. Stereoscopic displays advanced their spatial ability while solving issues to design e.g. urban spaces. The paper presents how a multi-touch tabletop can be used for these design collaboration and communication tasks. By using natural gestures, designers can now communicate and share their ideas by manipulating the same reference simultaneously using their own input simultaneously. Further studies showed that 3Dl forms are perceived and understood more readily through haptic and proprioceptive perception of tangible representations than through visual representation alone (Gillet et al, 2005). Based on the authors’ framework presented at the last CAADFutures, the benefits of integrating 3D visualization and tactile sensory can be illustrated in this platform (Chen and Wang, 2009), For instance, more than one designer can manipulate the 3D geometry objects on tabletop directly and can communicate successfully their ideas freely without having to waiting for the next person response. It made the work more effective which increases the overall efficiency. Designers can also collect the real-time data by any change they make instantly. The possibilities of Uniy3D make designing very flexible and fun, it is deeply engaging and expressive. Furthermore, the unity3D is revolutionizing the game development industry, its breakthrough development platform for creating highly interactive 3D content on the web (http://unity3d.com/ , 2010) or similar to the interface of modern multimedia devices such as the iPhone, therefore it allows the designers to work remotely in a collaborative way to integrate the design process by using the individual mobile devices while interacting design in a common platform. In design activities, people create an external representation of a domain, often of their own ideas and understanding. This platform helps learners to make their ideas concrete and explicit, and once externalized, subsequently they reflect upon their work how well it sits the real situation. The paper demonstrates how this tabletop innovatively replaces the typical desktop metaphor. In summary, the paper addresses two major issues through samples of collaborative design: firstly presenting aspects of learners’ interactions with physical objects, whereby tangible interfaces enables them constructing expressive representations passively (Marshall, 2007), while focussing on other tasks; and secondly showing how this novel design tool allows designers to actively create constructions that might not be possible with conventional media.
keywords	Multi-touch tabletop, Tangible User Interface
series	CAAD Futures
email
last changed	2012/02/11 19:21

For more results click below: