Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 437

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2010_279
id	ascaad2010_279
authors	Celani, G.; L. Medrano; J. Spinelli
year	2010
title	Unicamp 2030: A plan for increasing a university campus in a sustainable way and an example of integrated use of CAAD simulation and computational design strategies
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 279-286
summary	The state university of Campinas, Unicamp, is a public university in upstate São Paulo, Brazil, ranked the second best in the country. It was founded in 1966, and its main campus started to be built in 1967, in the suburbs of Campinas, nowadays a two-million people city. The area of the campus is almost 3 million square meters (300 hectares), with a total built area of 522.000 m2 and a population of 40 thousand people - 30 thousand students, 2 thousand faculty members and almost 8 thousand staff members. The campus’ gross population density is 133 people per hectare. Less than 6% of the total campus area is presently occupied. The design of Unicamp's campus is based on concepts that were typical of the modern movement, with reminiscences of corbusian urbanism, in which preference is given to cars and buildings are spread apart on the territory, with little concern to the circulation of pedestrians. The standard building type that has been built on campus since the 1970's is based on non-recyclable materials, and has a poor thermal performance. Unicamp is expected to double its number of students by the year 2030. The campus density is thus expected to grow from 600 people per hectare to almost 1,000 people per hectare. The need to construct new buildings is seen as an opportunity to correct certain characteristics of the campus that are now seen as mistakes, according to sustainability principles. This paper describes a set of proposals targeting the increase of the campus' density in a sustainable way. The plan also aims at increasing the quality of life on campus and diminishing its impact on the environment. The main targets are: - Reducing the average temperature by 2oC; - Reducing the average displacement time by 15 minutes; - Increasing the campus' density by 100%; - Reducing the CO2 emissions by 50%. // In order to achieve these goals, the following actions have been proposed: Developing a new standard building for the university, incorporating sustainability issues, such as the use of renewable and/or recyclable materials, the installation of rainwater storage tanks, the use of natural ventilation for cooling, sitting the buildings in such a way to decrease thermal gain, and other issues that are required for sustainable buildings' international certifications. To assess the performance of the new standard building, different simulation software were used, such as CFD for checking ventilation, light simulation software to assess energy consumption, and so on. 1. Filling up under-utilized urban areas in the campus with new buildings, to make better use of unused infrastructure and decrease the distance between buildings. 2. Proposing new bicycle paths in and outside campus, and proposing changes in the existing bicycle path to improve its safety. 3. Developing a landscape design plan that aims at creating shaded pedestrian and bicycle passageways.
series	ASCAAD
type	normal paper
email
last changed	2021/07/16 10:37

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadia10_379
id	acadia10_379
authors	Geiger, Jordan; San Fratello, Virginia
year	2010
title	Hyperculture: Earth as Interface
doi	https://doi.org/10.52842/conf.acadia.2010.379
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 379-384
summary	Digital Fabrication and Hybrid Interface: Lessons in Agriculture :abstract Two vitally important fields of work in architecture and computing—in digital fabrication methods and in the development of interfaces between digital and analog systems—can find new forms in their combination with one another. Moreover, a recent such experiment in the production of landscape rather than building not only suggests a number of implications for architectural work, but of ecological, economic and urban structures that underlie the projects’s visible formal and aesthetic orders. This project, “Hyperculture: Earth as Interface,” studied the potential outcomes of modifying a commonly employed information infrastructure for the optimization of agricultural production throughout most of America’s heartland; and that same infrastructure’s latent flexibility to operate in both “read” and “write” modes, as a means for collaborative input and diversified, shared output. In the context of industrialized agriculture, this work not only negotiates seemingly contradictory demands with diametrically opposed ecological and social outcomes; but also shows the fabrication of landscape as suggestive of other, more architectural applications in the built environment. The Hyperculture project is sited within several contexts: industrial, geographically local, ecological, and within the digital protocols of landscape processing known as “precision agriculture.” Today, these typically work together toward the surprising result of unvariegated repetition, known commonly as monoculture. After decades of monoculture’s proliferation, its numerous inefficiencies have come under broad recent scrutiny, leading to diverse thinking on ways to redress seemingly conflicting demands such as industry’s reliance on mass-production and automation; the demand for variety or customization in consumer markets; and even regulatory inquiries into the ecological and zoning harms brought by undiversified land use. Monoculture, in short, is proving unsustainable from economic, environmental, and even aesthetic and zoning standpoints. But its handling in digital interfaces, remote sensing and algorithmically directed fabrication is not.
keywords	GPS, precision agriculture, digital landscape fabrication, interface, analog/digital systems, open source platform, digital fabrication, multi-dimensional scales
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:51

_id	ascaad2010_161
id	ascaad2010_161
authors	Loemker, Thorsten Michael
year	2010
title	Design and Simulation of Textile Building Elements
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 161-170
summary	In this paper we examine the use of textile building elements and investigate on their potential scope of application in architecture. Other than commonly used for spanned or tent-like structures we concentrate on the use of textiles for folded, crinkled and procumbent assemblies, as these seem to correspond much better with the textiles´ inherent properties. On closer examination of these properties it becomes obvious that fabric primarily exists in a loose, uneven and irregular physicality that can be adjusted and configured into different states that match specific criteria. That is why fabric is mainly used for covering, protecting or hiding objects, e.g. as apparel for people. Only at a second glance does one recognize that textiles can be used for many other purposes such as collecting, separating, filtering or even healing. Thus, in the first instance of this research we examined customary usages and classified them into different categories that aided us to further develop practical application areas for the architectural domain. Subsequently to the fact that the shape of a textile might alter under the influence of forces, the further focus of this research lied on the appraisal of digital simulation techniques and simulation engines to provide sophisticated instruments for the generation of the associated time-based geometric form of the fabric. External elements that might drive this deformation process such as wind, temperature, precipitation, as well as static and dynamic building components were considered in the simulation process in order to generate visual output of the corresponding shapes. Studies about bipartite materials that can control the deformation process and might lead the textile beyond its primary functionality conclude this work.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	acadia10_49
id	acadia10_49
authors	Meier, Alexis
year	2010
title	Computation against design? Toward a new logicocentrism in architecture
doi	https://doi.org/10.52842/conf.acadia.2010.049
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 49-52
summary	The purpose of this paper is to make apparent critical and theoretical aspects of the instrumentation of new technologies inside architectural processes. After twenty five years of “Choral Work” between architecture and post-structuralist philosophy superimposed together inside architectural processes, we now face a new technological era which seems to provide a new figure of authority by replacing logocentrism to mathematical logicocentrism. Everywhere, the “insemination” of computer by biogenetic algorithms and codification processes transform matter into a zoocentric paradigmatic system, which is supposed, by its internal “modulation,” to extend our potential of social dynamics into space. The goal of our demonstration will then be to examine new technical and theoretical strategies, in a way that the positivistic structure of computation can avoid a totalizing effect (that leading architecture under technological domination), but open up to an un-programmable (emergent) future far above “weaving” and calculated design.
series	ACADIA
type	panel paper
email
last changed	2022/06/07 07:58

_id	acadia10_139
id	acadia10_139
authors	Miller, Nathan
year	2010
title	[make]SHIFT: Information Exchange and Collaborative Design Workflows
doi	https://doi.org/10.52842/conf.acadia.2010.139
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 139-144
summary	This paper explores design processes requiring the invention and implementation of customized workflows for the optimization of design information exchange. Standard workflows in design software are typically dependent upon the use of proprietary file formats to communicate design intent across the design team. Software platforms promote “one-stop-shop” proprietary approaches to BIM where all team members and consultants ideally operate within a single model environment and store information within a single file format. While the ‘single model’ approach can be effective under some circumstances, this approach is often found to be limiting when the design process calls for the integration of other design toolsets and delivery processes. This is especially true for large complex projects where multiple participants with different software requirements need to collaborate on the same design. In these cases, various non-standard ways of working are often implemented, resulting in a new means of communicating design and building information across a team. This paper will outline the impact customized workflows have on the design process at NBBJ and evaluate their potential for leading to more innovative design and integrated teams. The first study will explore and evaluate the communication and collaborative process that took place in the design development and construction documentation stages of the Hangzhou Stadium. The second study will be an overview of ongoing investigation and experimentation into customized workflows for team and data integration.
keywords	team integration, international practice, parametric methods
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:58

_id	ijac20108101
id	ijac20108101
authors	Phan, Viet Toan; Seung Yeon Choo
year	2010
title	Augmented Reality-Based Education and Fire Protection for Traditional Korean Buildings
source	International Journal of Architectural Computing vol. 8 - no. 1, 75-91
summary	This study examines an application of Augmented Reality technology (AR) for Korean Cultural Traditional Buildings, specifically, the Namdaemun Gate, "National Treasure No 1" of the Republic of Korea. Unfortunately, in February 2008, the Namdaemun Gate burned down, despite the efforts of many firemen, as the main difficulty was getting the fire under control without any structural knowledge of the wooden building. Hence, with the great advances in digital technology, an application of virtual technical information to traditional buildings is needed, and the new technology of AR offers many such advantages for digital architectural design and construction fields. While AR is already being considered as new design approach for architecture, outdoor AR is another practical application that can take advantage of new wearable computer equipment (Head-mounted display also know as HMD, position and orientation sensors, and mobile computing) to superimpose virtual graphics of traditional buildings (in this case, Namdaemun Gate) in a real outdoor scene. Plus, outdoor AR also allows the user to move freely around and inside a 3D virtual construction, thereby offering important training opportunities, for example, specific structural information in the case of firemen and mission planning in the case of a real-life emergency. In this example, the proposed outdoor AR system is expected to provide important educational information on traditional wooden building for architects, archaeologists, and engineers, while also assisting firemen to protect such special buildings.
series	journal
last changed	2019/05/24 09:55

_id	acadia10_88
id	acadia10_88
authors	Steinfeld, Kyle; Bhiwapurkar, Pravin; Dyson, Anna; Vollen, Jason
year	2010
title	Situated Bioclimatic Information Design: a new approach to the processing and visualization of climate data
doi	https://doi.org/10.52842/conf.acadia.2010.088
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 88-96
summary	Currently, most approaches to graphic evaluative frameworks (GEFs) for the early-stage evaluation of bioclimatic design strategies adopt a design-tool metaphor, wherein a battery of analytical routines is performed by a software tool based upon a standardized weather file from which a stock set of graphic material is produced. In seeking to evaluate a broad range of climates and to address a wide variety of passive design strategies, existing climate visualization and evaluation tools position themselves far outside of the context of a situated design problem. Remaining agnostic to the particularities of site, program, tectonic system, and material behavior these tools become, by definition, generic. As a consequence, while such design-tools can be effective in evaluating particular relationships between environmental resource, demand profile, and built-system, they maintain a potential to be rendered ineffective in any outlying cases not specifically anticipated by their authors . Situated Bioclimatic Information Design (SBID) presents an alternative approach that targets a class of design strategies prominent among these outlying cases: those highly responsive to negotiation between the continually fluctuating resources within microclimates and the fluctuating demand profile of the building program. Using a custom-built weather data parser a number of diagrams and data visualizations have been produced under this approach. These visualizations are not only useful in and of themselves for aligning design strategies to specific contexts, but they also illustrate the foundations of a larger theoretical framework for the processing and visualization of climatic data for effective utilization of bioclimatic flows.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	ascaad2010_231
id	ascaad2010_231
authors	Turrin, M.; R. Stouffs and S. Sariyildiz
year	2010
title	Parametric Design of the Vela Roof
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 231-240
summary	Due to the increased request for representative structures and for spaces to be used independent of the weather conditions, contemporary cities increasingly integrate public covered spaces (shadowed squares and streets, courtyards, historic commercial galleries, etc.) in the urban fibre. Facing the design of large roof structures for semi outdoor spaces is increasingly common for architects and engineers. When focusing on large roofs, aesthetics, structural performance and economics often dominate the design process. However, the current increased emphasis on energy-related aspects generates new challenges. Particularly, the use of renewable energy resources needs to be confronted. In this paper we will address the subject through a case study whose design aimed at integrating performance evaluations in the very early stages of the process. The case study focuses on the so-called “Vela roof”. This roof is part of a larger project currently under construction in Bologna (Italy). The focus of the study concerns the use of on-site renewable climate (energy) resources with special attention given passive reduction of summer overheating and daylight. For these tasks a parametric model was developed to support the decision making process and the paper will present its potential with respect to performance-oriented design during the conceptual design phase of roof structure. The very first conceptual design developed by the architectural office was assumed as a starting point for the inclusion of performance criteria. In the preliminary design of the roof uncomfortable conditions were expected under the whole roof in the summer. Various strategies for improving the thermal comfort were investigated, involving a large set of combined systems. Not all of these will be detailed in this paper. Instead we will focus on the ones directly affected by the geometry of the roof. Those are mainly air flow for cooling and the reduction of solar gain, in combination with their effects on daylight. Their investigation was based on a chain of dependencies to be integrated in the design process. With respect to that, parametric modelling was used. Parametric modelling allows both geometrical entities and their relationships to be represented. These relationships are structured in a hierarchical chain of dependencies, established during the preliminary parameterization process. The independent properties of the model are usually expressed through independent parameters, and their variations generate different configurations of the model. By making use of this potential, three project scales were parametrically explored. At the large scale, parametric variations of the overall shape of the roof were investigated in relation to cooling through ventilation and here the parametric model allowed for the generation of both different configurations of the roof, including its structural morphology and variations of its structural tessellation. At the medium scale, the integration of openable modules was investigated in relation to air extraction for cooling; with respect to this, the parametric model allows exploring openings based on variations of size and distribution. At the small scale, various options were explored for the cladding system, in order to reduce the direct solar gain while still allowing the income of indirect natural light. The parametric model was used to investigate the configuration of self-shading modules and their integration in the structure. Specific emphasis will be given to the small scale. The advantages in design process and the current limits of the parametric modelling approach used here will be discussed in the paper.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	caadria2010_039
id	caadria2010_039
authors	Yeung, W. and J. Harkins
year	2010
title	Digital architecture for humanitarian design: a case study of applying digital technologies in post-disaster reconstruction
doi	https://doi.org/10.52842/conf.caadria.2010.413
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 413-422
summary	This paper describes the context and proposal for applying digital technology in humanitarian design for remote areas of developing countries that are the most technologically challenged. It presents a case study of on-going post-disaster reconstruction in the Solomon Islands. A system of digital tools, in particular parametric modelling, was devised to optimise the exemplar design for site and project specific needs, and reduce time and cost required in the overall design and construction process. Shelters developed under this system will start construction in 2010.
keywords	Optimisation of design; parametric design; post-disaster; algorithmic modelling; developing countries
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	acadia10_16
id	acadia10_16
authors	Lorenzo-Eiroa, Pablo
year	2010
title	In:forming a Critical Digital Architecture Autonomy into Life
doi	https://doi.org/10.52842/conf.acadia.2010.016
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 16-23
summary	Referential structures in digital representation and those structures that have established contemporary canons have been progressively negated. As a result of this tendency, post-structuralism, as a pendulous reactionary force against structuralism, broke away from deconstruction’s conceptual premise: to produce a full decomposition of any assumed disciplinary fundamentals. Therefore, rather than focusing on a syntax based on structural logics, current digital architecture tendencies hide deep conceptual structures in favor of superficial perceptual structures, relying on the media-based spectacular semiotic effect of the visual that has exhausted its capacity to be critical.
series	ACADIA
type	Forewords
last changed	2022/06/07 07:59

_id	ascaad2014_023
id	ascaad2014_023
authors	Al-Maiyah, Sura and Hisham Elkadi
year	2014
title	Assessing the Use of Advanced Daylight Simulation Modelling Tools in Enhancing the Student Learning Experience
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 303-313
summary	In architecture schools, where the ‘studio culture’ lies at the heart of students’ learning, taught courses, particularly technology ones, are often seen as secondary or supplementary units. Successful delivery of such courses, where students can act effectively, be motivated and engaged, is a rather demanding task requiring careful planning and the use of various teaching styles. A recent challenge that faces architecture education today, and subsequently influences the way technology courses are being designed, is the growing trend in practice towards environmentally responsive design and the need for graduates with new skills in sustainable construction and urban ecology (HEFCE’s consultation document, 2005). This article presents the role of innovative simulation modelling tools in the enhancement of the student learning experience and professional development. Reference is made to a teaching practice that has recently been applied at Portsmouth School of Architecture in the United Kingdom and piloted at Deakin University in Australia. The work focuses on the structure and delivery of one of the two main technology units in the second year architecture programme that underwent two main phases of revision during the academic years 2009/10 and 2010/11. The article examines the inclusion of advanced daylight simulation modelling tools in the unit programme, and measures the effectiveness of enhancing its delivery as a key component of the curriculum on the student learning experience. A main objective of the work was to explain whether or not the introduction of a simulation modelling component, and the later improvement of its integration with the course programme and assessment, has contributed to a better learning experience and level of engagement. Student feedback and the grade distribution pattern over the last three academic years were collected and analyzed. The analysis of student feedback on the revised modelling component showed a positive influence on the learning experience and level of satisfaction and engagement. An improvement in student performance was also recorded over the last two academic years and following the implementation of new assessment design.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	sigradi2010_209
id	sigradi2010_209
authors	Aroztegui, Carmen
year	2010
title	Superficies adulteradas: el muro en línea y la representación fílmica [Adulterated surfaces: the online wall and conematic representation]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 209-212
summary	Online communities use a “wall” as a place to articulate non - synchronic communication among its members. Such a place, however, poorly explores the metaphor of the wall as a means of enhancing online experiences. Online “walls” do not explore or challenge the richness of a real wall, and they do not embrace new experiences that are only possible in the digital world. In order to tackle these issues, this paper analyzes three movie scenes where the everyday perception of the wall is altered by madness and estrangement. Finally, the paper suggests how these perceptions of the wall could be integrated into interfaces using touch screen technologies.
keywords	online, wall, metaphor, film, representation
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia10_263
id	acadia10_263
authors	Beaman, Michael Leighton; Bader, Stefan
year	2010
title	Responsive Shading \| Intelligent Façade Systems
doi	https://doi.org/10.52842/conf.acadia.2010.263
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 263-270
summary	As issues of sustainability gain traction for architects, methodologies for designing, analyzing, and calibrating design solutions have emerged as essential areas of research and development. A number of approaches have been pursued with regard to embedding data into the design process, most fall into one of two approaches to research. The first approach is to mediate environmental impact at the level of applied technology; the second alters building methods and material construction, generating efficient energy use. However, few approaches deal with the crafting of relationships between information and performance on an architectural level. We will examine an approach focused on understanding how crafting relationships between information and design can move architecture towards achieving sustainability. In developing this approach, we created a data-driven design methodology spanning from design inception to construction. Data-driven models, common in the fields of natural science, offer a method to generate and test a multiplicity of responsive solutions. By contextualizing the solutions generated, we were able design though a set of specific and controlled responses rather than as a singular solution. Information utilization requires a new kind of craft that moves beyond instances into relationships and offers performance sensitive issues in design a focused trajectory. We applied this method to the research and development of a responsive shading structure built in conjunction with a thermal testing lab for two test locations – Austin, Texas (Figure. 1 and 2) and Munich, Germany. The following paper chronicles the design and construction at the Texas site over an academic semester.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia10_145
id	acadia10_145
authors	Briscoe, Danelle
year	2010
title	Information Controlled Erosion
doi	https://doi.org/10.52842/conf.acadia.2010.145
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 145-150
summary	This paper documents research of a design process that interrelates a single information model to 5-axis, waterjet cutting technology. With the intention of creating an optimized design, data is streamed through a building information model that controls geometry parametrically by a component/system relationship. At the scale of a 4’x8’ panel, material properties and pattern variability act as underlying initiators of design rather than post-rational information. In a manner uncommon to the discipline, the information model is being used as a generative tool, rather than as one for mere documentation. The research assigns a limestone wall type to the panel—a material predominantly used in areas where it is indigenous and typically desirable for its texture, color, and thermal properties. The intention is to develop potentialities through material specificity in the information model’s conceptualization. The water-jet process is then used to erode the limestone to achieve varying fields of scalar voids. In addition, the thickness of wall cladding attenuates for figuration and interest. The final stone panels transition from a rain screen system to a solar screen that modulates light, thereby linking environmental intentions to current technological capabilities. The information model is exported for analysis of daylight and structural dynamic qualities and quantities as part of the workflow. Parameters within the information model database facilitate a dimensionally controlled iterative process. Moreover, fabricating with building materials via the information model expedites a design and makes possible for materiality to move beyond merely conceptual representation.
keywords	digital fabrication, information model
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia10_372
id	acadia10_372
authors	Dierichs, Karola; Menges, Achim
year	2010
title	Material Computation in Architectural Aggregate Systems
doi	https://doi.org/10.52842/conf.acadia.2010.372
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 372-378
summary	Aggregates are defined as large amounts of elements being in loose contact. In architecture they are mainly known as an additive in concrete construction. Relatively few examples use aggregates in their unbound form as an architectural material system in their own right. The investigation of potential architectural applications however is both a very relevant and unexplored branch of design research. Loose granular systems are inherently different from other architectural construction systems. One of the most decisive distinctions lies in the way information on those granular architectural systems is being generated, processed, and integrated into the design process. Several mathematical methods have been developed to numerically model granular behaviour. However, the need and also the potential of using so-called ,material’ computation is specifically relevant with aggregates, as much of their behaviour is still not being described in these mathematical models. This paper will present the current outcome of a doctorate research on aggregate architectures with a focus on information processing in machine and material computation. In the first part, it will introduce definitions of material and machine computation. In the second part, the way machine computation is employed in modelling granulates will be introduced. The third part will review material computation in granular systems. In the last part, a concrete example of an architectural aggregate model will be explained with regard to the given definition of material computation. Conclusively a comparative overview between material and machine computation in aggregate architectures will be given and further areas of development will be outlined.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	ecaade2010_107
id	ecaade2010_107
authors	Gaiani, Marco; Ferioli, Silvia; Ricci, Pier Carlo; Barone, Mirko; Agnoletti, Michele
year	2010
title	A Framework for a Sustainable Design and Presentation Process of Furniture Collection
doi	https://doi.org/10.52842/conf.ecaade.2010.471
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.471-480
summary	Design and presentation of new furniture is today a great challenge that requires a large amount of resources: exhibition space, photographic studios, physical prototypes, etc. In this paper we present a new RTR framework RTR-based that allows a more sustainable design and communication process. The framework is addressed to furniture designers, interior designers, furniture companies and presents techniques and methods developed to meet the requirement to ensure predictive rendering quality required by the high level furniture industries. Finally, in order to ensure full functionality a number of tools described in the paper were developed.
wos	WOS:000340629400051
keywords	Real-time rendering; Semantic modeling; Virtual furniture design
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaade2010_148
id	ecaade2010_148
authors	Joyce, Sam; Tabak, Vincent; Sharma, Shrikant; Williams, Chris
year	2010
title	Applied Multi-Scale Design and Optimization for People Flow
doi	https://doi.org/10.52842/conf.ecaade.2010.633
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.633-639
summary	This paper presents an overview of the current developments in people flow analysis in Buro Happold’s analytical group SMART Solutions. The role of people flow analysis has become an established one, within many leading consultancy firms with their own specialist groups supporting the architects and planners in the design of buildings and urban spaces. This paper proposes that the key development in the progression of this work is a due to a change in emphasis, away from a passive analysis task where its key role is to validate assumptions of flow and alleviate areas of high concern to using the process as a design instigator/driver. The new paradigm emerging, involves calculating people flow at the conceptual stage of a project in collaboration with the respective architectural firm, and using this information as a primary design input. This paper describes and analyses the two objectives set out by Buro Happold’s SMART group in order to improve the process of design; firstly to make it more prominent in the design environment and secondly to see if it has the potential to work as a design driver. These objectives create a design methodology defined by people flow and suggest value in innovating and conceiving of robust simple methods of improving designs.
wos	WOS:000340629400068
keywords	People flow; Pedestrian flow; Multi-objective optimization; Masterplanning; Network analysis
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2010_210
id	ecaade2010_210
authors	Lassance, Guilherme; Klouche, Djamel; Izaga, Fabiana; Duarte, Gabriel
year	2010
title	Contemporary Metropolitan Conditions: New challenges for design education
doi	https://doi.org/10.52842/conf.ecaade.2010.157
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.157-166
summary	This paper aims to address design education issues, with a focus on the way the contemporary metropolis is conceived. We understand the reality of the contemporary metropolis as an amalgam of specific issues that transcend local and regional contexts, converging into the categories of the so-called ‘global cities’. These new urban realities derive from territories originally controlled by other logics, and are now in new stages of post-industrial development. Thus, we notice the presence of large peripheral areas where existing industrial activities initially took place, which were later transformed and migrated, leaving behind urban fragments that are taken over by informal activities. Such sites are often crossed, when not ‘on-winged’, by transport infrastructure, increasingly essential to the growing intensity of metropolitan flows. Working with this new reality clearly means first and foremost to reexamine the tools and traditional methods of design and representation of the architect and urban planner.
wos	WOS:000340629400017
keywords	Design process; Design education; Contemporary metropolis
series	eCAADe
email
last changed	2022/06/07 07:52

_id	caadria2010_025
id	caadria2010_025
authors	Meyboom, Annalisa; Jerzy Wojtowicz and Greg Johnson
year	2010
title	ROBO studio: towards architectronics
doi	https://doi.org/10.52842/conf.caadria.2010.259
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 259-268
summary	Contemporary architecture can be seen as a dynamic system that causes change to its environment, or even as system that can modify itself. Interactive or responsive environments are not totally new to architecture however the possibilities in architecture have only been lightly referred to. This interdisciplinary design studio, with mechatronics engineers and architects collaborating, explored possible applications with real world equipment, sensors and knowledge. Development of responsive architecture requires architects to have a fluency in sensors, actuators and their control system programming. New potential application of technologies requires a re-framing of what that technology could do in a different social application. Together these issues challenged architecture and engineering students in a collaborative design environment. The resulting projects – kinetic architecture on control systems – challenge our understanding of what our built environment could be.
keywords	Architecture; mechatronics; robotics; kinematics; design
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:58

For more results click below: